focus optics technolog f.o.t. specification sheetcut+sheet.pdf · 6/21/2019 · focus optics...

FOCUS OPTICS TECHNOLOGY (F.O.T.™) Specification Sheet

716 Monterey Pass Rd, Monterey Park, CA 91754

213.250.6069 | [email protected] | www.opticarts.com

Optic Arts reserves the right to modify this specification without prior notice.

Last Modified: June 21, 2019 2:34 PM© Optic Arts 2018

1 of 14

F.O.T.™ is a collection of high performance precision optics distinguished by its industry leading size to efficacy ratio and ability to seamlessly interconnect. F.O.T.™ allows for surface mount solutions for beam control in wall washing, grazing, spot and asymmetric distributions for limitless design scenarios.

ELECTRICAL

PHYSICAL

PERFORMANCE

LUMEN OUTPUT

Input Voltage Dimming Options

Power Consumption Wire Size Certification

24VDC• PURE DC™• 0-10V• DMX• Lutron (2-WIRE, 3-WIRE, EcoSystem)9 Watts per foot18AWG, 2 wireETL - Conforms to UL Std. 2108; Certified to CSA Std. C22.2 No. 9.0; Title 24 - All models are JA8 2016compliant when used with 0-10V, DMX, Lutron A-Series 2-Wire or Lutron Premier dimming.

Standard Lengths

Operating Temperature EnvironmentMaximum Run Length Dimensions

Optics

6.00” (152.40mm), 12.00” (304.80mm), 24.00” (609.60mm)-20° C (-40°F) to +50°C (+122°F)Indoor10.00’Width: 0.72” (18.40mm) Height:Asymmetric: 0.38” (9.60mm)Narrow: 0.35” (9.00mm)Oval Grazing: 0.32” (8.30mm)AsymmetricNarrow: 15°x15° DistributionOval Grazing: 20ºx45º Distribution

CRILumen MaintenanceBinning Tolerance Warranty

9050,000 Hours L70 at 25ºC ambient +/- 60K5 years

2700K3000K 3500K

608.00 lm/ft645.00 lm/ft748.00 lm/ft

628.00 lm/ft674.00 lm/ft782.00 lm/ft

599.00 lm/ft660.00 lm/ft766.00 lm/ft

ASYMMETRIC NARROW OVAL GRAZ.

Note: Stated lumen values have a tolerance of +/- 10%.

R

+ + + + + + +

90 = 9.0WPART NUMBER BUILDER

ChannelPower Feed ConnectorJumper, 4’’Jumper, 12’’

Optic Arts® Channel (pg. 3-4)FOT-PFC (pg. 5)FOT-J04 (pg. 6)FOT-J12 (pg. 6)

ACCESSORIES

FOT AS = AsymmetricNA = NarrowOG = Oval Grazing

27 = 2700K1

30 = 3000K1

35 = 3500K1

SERIES OPTICS COLOR

F.O.T.™

TITLE24

Note: All models are JA8 when used with 0-10V, DMX, Lutron A-Series 2-Wire or Lutron Premier dimming. (Only available in configuration 3)

1: JA8 when used with 0-10V, DMX, Lutron A-Series 2-Wire or Lutron Premier dimming. (Only available in configuration 3)

VOLTAGE

24 = 24 VDC

CONFIGURATION LENGTH JA8

FLC1 = FLEX Config 1FLC2 = FLEX Config 2FLC3 = FLEX Config 3

XX = Custom Length (6” Increments)

Y = YesN = No

90 = 9.0W

WATTAGE

Narrow - 1

5ºx15º Distr

ibution

Oval Grazin

g - 20ºx4

5º Distr

ibution

Asymmetri

c






2 of 14

DIMENSIONS & OPTICS

• Due to the nature of the F.O.T.™ product, run lengths may not fall exactly on specified length. In this case, Optic Arts® will always provide length to the smaller dimension unless otherwise specified.

• Unless otherwise specified, 1.00” per power feed is added to channel length.

• Some on-site assembly required. See installation guides for details.

0.72

”

0.72

”

0.72

”0.

38’’

(9.6

0mm

)0.

35’’

(9.0

0mm

)

0.32

’’(8

.30m

m)

0.86” 0.86”

0.86”

Narrow - 15ºx15º Distribution

Narrow

Asymmetric

Asymmetric

Oval Grazing - 20ºx45º Distribution

Oval Grazing

Note: Supplied in 6", 12", 24" sizes. Field connected up to 10' max.

180 165150

135

120

105

90

75

60

45

3015015

30

45

60

75

90

105

120

135

150165

Beam angle

180 165150

135

120

105

90

75

60

45

3015015

30

45

60

75

90

105

120

135

150165

Beam angle

180 165150

135

120

105

90

75

60

45

3015015

30

45

60

75

90

105

120

135

150165

Beam angle 97.9º 43.6º 14º

Specified Length0.75”

DIMENSIONS

WidthHeight

Standard Lengths Pitch LengthMax Run Length

0.72” (18.40mm),

Asymmetric: 0.38” (9.60mm), Narrow: 0.35” (9.00mm), Oval Grazing: 0.32” (8.30mm),

6.00”, 12.00”, 24.00”

0.86” (21.85mm)

10.00’ (3048.00mm)






3 of 14

Click to access CHANNEL ACCESSORIES CATALOGUE >

CH-FOT-SH-SF-SSA: 0.91” (23.10mm)B: 0.44” (11.13mm)C: 0.73” (18.55mm)

DIMENSIONS

ACCESSORIES

CH-FOT-SH-SF-ECCH-MCCH-MC-RCH-FOT-SCREWCH-PD-KITCH-AB-STACH-AB-90FCH-AB-90R

End CapMounting ClipRotating Mounting ClipF.O.T. Mounting ScrewPendant KitStraight Aligner Bracket90 Degree Flat Aligner Bracket90 Degree Raised Aligner Bracket

FINISH

*Special order finishes may increase order lead time and incur an added cost

Satin SilverDeep Bronze Anodized*Matte Black Anodized*White Powder Coat*Blue Powder Coat*

Red Powder Coat*Gray Powder Coat*Chrome*Custom RAL Powder Coat*

Anodized aluminum channel designed to fit Optic Arts® F.O.T.™.

PHYSICAL

MOUNTING OPTIONS - CHANNEL

CH-FOT-SH-SF-SS

Description Material Length

Channel for F.O.T. ™.Anodized AluminumChannel: 7.00’

C

B

A

http://www.opticarts.com/assets/ACCESSORIES+CUT+SHEET.pdf








4 of 14

Click to access CHANNEL ACCESSORIES CATALOGUE >

Anodized aluminum channel designed to fit Optic Arts® F.O.T.™.

MOUNTING OPTIONS - CHANNEL

CH-FOT-TL-SF-SS

CH-FOT-TL-SF-SSA: 0.91” (23.10mm)B: 1.04” (26.16mm)C: 0.73” (18.55mm)

DIMENSIONS

ACCESSORIES

CH-MD-LN-FL-CCCH-FOT-TL-SF-ECCH-FOT-TL-SF-ECHCH-MCCH-MC-RCH-FOT-SCREWCH-PD-KITCH-AB-STACH-AB-90FCH-AB-90R

Clear Flat LensEnd Cap (0.625” added length)1

End Cap w/hole (0.625” added length)1

Mounting ClipRotating Mounting ClipF.O.T. Mounting ScrewPendant KitStraight Aligner Bracket90 Degree Flat Aligner Bracket90 Degree Raised Aligner Bracket

FINISH

*Special order finishes may increase order lead time and incur an added cost

Satin SilverDeep Bronze Anodized*Matte Black Anodized*White Powder Coat*Blue Powder Coat*

Red Powder Coat*Gray Powder Coat*Chrome*Custom RAL Powder Coat*

PHYSICAL

Description

Material Lens CoverLength

Deep channel for Narrow & Oval Grazing F.O.T.™.Anodized AluminumPolycarbonateChannel: 7.00’

CB

A

1: Endcaps add 1.25” to total length of fixture.









5 of 14

MOUNTING OPTIONS

MOUNTING CLIP

CH-MC

ROTATING MOUNTING CLIP

CH-MC-R

CH-FOT-TL-SF-SS

CH-FOT-TL-SF-SS

CH-FOT-TL-SF-SS

CH-FOT-SH-SF-SS

CH-FOT-SH-SF-SS

CH-FOT-SH-SF-SS

CHANNEL TYPE DIMENSIONS W/CLIP

CH-FOT-SH-SF-SS

CH-FOT-SH-SF-SS

CH-FOT-TL-SF-SS

CH-FOT-TL-SF-SS

H: 1.07” (27.38mm); W: 1.44’’ (36.58mm)

H: 1.67” (42.41mm); W: 1.44’’ (36.58mm)

PENDANT

CH-PD-KIT

CHANNEL TYPE SUSPENSION HEIGHT

Up to 3’ (914.40mm)

Up to 3’ (914.40mm)






6 of 14

0.22”(5.59mm)

0.22”(5.59mm)

0.22”(5.59mm)

3.13”(79.50mm) 1.46”

(37.08mm)

1.61”(40.89mm)

ALIGNER OPTIONS

Compatible Channel: Tall

STRAIGHT INSIDE/OUTSIDE CORNERS FLAT CORNERS






7 of 14

ACCESSORIES

Only available with CH-FOT-SH-SF-SS

Only available with CH-FOT-SH-SF-SS

0.12”(3.00m

m)

0.31”(8.00m

m)

0.58”(14.70mm)

0.19”(4.85mm)

0.30”(7.65mm)

6’ POWERFEED CONNECTOR

4’’ JUMPER

12’’ JUMPER

F.O.T.™ MOUNTING SCREW

FOT-PFC

FOT-J04

FOT-J12

CH-FOT-SCREW






8 of 14

• Specify Config-1

• Specify F.O.T. type and channel type

• One power feed per F.O.T. run

• Channel shipped uncut for field cutting.

• JA8 2016 not available in Config-1

• Config-1 is quick ship if run lengths are provided at time of order. Take offs, if needed, will add lead time.

1

3

6’ Wire Lead

Packaged in Foam Sleeve& Labelled

CONFIGURATION TYPES

Pre-Assembled Factory Finished Fixtures 1

• Specify Config-3

• Fully assembled fixture

• ETL stamped and listed as a fixture

• 7’ max length

• Standard 6’ power lead unless otherwise specified

• Specify FLEXConfig-2

• Specify FLEX type and channel type

• Specify run lengths

• IP68 only available in FLEXConfig-2

• If no config is specified, and run lengths are provided, FLEXConfig-2 will be used

6’ Wire Lead Standard

Tape Cut to Length

Cut To Length With Soldered Leads, Assemble On-Site 1, 2, 32

Channel Cut & LabelledFLEX Cut & Labelled

1. Due to the nature of the FOT product, specific lengths do not factor in endcaps. Actual length of fixture is determined by which channel is used (see channel page for added endcap length).

NOTES:

F.O.T. Boards,Standard Product Labels Channel Uncut

F.O.T. Boards, Channel uncut for field cutting

Power feeds

No Wire Lead






9 of 14

COMPATIBLE DRIVERS

120 VAC

PURE DC™DRIVER

24V DC+

24V DC-

+

–

120 VAC WIRING

PURE DC™DRIVER

24V DC+

24V DC-

277 VAC+

–

277 VAC WIRING

PURE DC™ MLV (PDC)

40W 120/277VAC PURE DC™ MLV DIMMABLE DRIVER

96W 120/277VAC PURE DC™ MLV DIMMABLE DRIVER

PDC.40.24

PDC.96.24

DESCRIPTIONPART

DIMENSIONS

DIMMING PERFORMANCE

40W96W

L 14.25”; W 3.00”; H 2.88”

L 14.75”; W 4.31”; H 4.81”

PURE DC™ DRIVER Dims to 0.1% on most MLV dimmers






10 of 14

COMPATIBLE DRIVERS

ELECTRONIC DRIVER - NON-DIM (ND)

96W 120-277VAC ELECTRONIC DRIVERGG100E-24-UNV

DESCRIPTIONPART

GG100-24-UNV

120 - 277 VAC

DIMENSIONS

DIMMING PERFORMANCE

ELECTRONIC DRIVER H 3.00”; W 11.46”; D 1.30”

ELECTRONIC DRIVER Non-Dim

24V DC+ 24V DC-

ELECTRONIC DRIVER W/0-10V MODULE (010)

96W 120-277VAC ELECTRONIC DRIVER WITH 0-10V DIMMING

MODULE (SINK)

GG100E-24-UNV-010V

DESCRIPTIONPART

DIMENSIONS

DIMMING PERFORMANCE

ELECTRONIC DRIVER - 0-10V H 3.00”; W 11.46”; D 1.30”

ELECTRONIC DRIVER - 0-10V Dims below 1% on most 0-10V dimmers

GG100-24-UNV

0-10 +

24V +

0-10 -

24V -

120 - 277 VAC

0 - 10 V CONTROLLER

VIOLET WIRE TO 0-10V CONTROLLER +

YELLOW WIRE TO LED +BLACK WIRE TO DC - OUTPUT OF DRIVER

RED WIRE TO DC + OUTPUT OF DRIVERBLUE WIRE TO LED -

GRAY WIRE TO 0-10V CONTROLLER -

FIELD INSTALLED IN LOW VOLTAGE WIRING COMPARTMENT

- Max number of 25 modules on one dimmer. Consult dimmer datasheet for maximum device limitation of a specific controller.

- Install DIM-010V Module in low voltage wiring compartment.

DIM-010V0-10V MODULE






11 of 14

COMPATIBLE DRIVERS

ELECTRONIC DRIVER W/DMX MODULE (DMX)

96W 120-277VAC ELECTRONIC DRIVER WITH eldoLED DMX

DIMMING MODULE

GG100E-24-UNV-DMX

DESCRIPTIONPART

*Must be installed in UL box (by others)

DIMENSIONS

DIMMING PERFORMANCE

96W H 3.00”; W 11.46”; D 1.30”

DMX MODULE H 1.97”; W 6.02”; D 0.91”

ELECTRONIC DRIVER - DMX MODULE Dims to 0.1% on most DMX systems

LED+CH1

GG100-24-UNV

120 - 277 VAC

FROM DMX CONTROLLER (BY OTHERS)

OUT TO NEXT MODULE

DMX MODULE®

24V DC+

24V DC-

DMX in +

LEDSync thru +LEDSync thru -

DMX in -DMX in shield

LEDSync shield

For more options to wire DMX module, reference DMX System cut sheet.

CH1LED+

http://www.opticarts.com/assets/DMX+Module+Cut+Sheet.pdf






12 of 14

DIMMER WITH NEUTRAL

DIMMER WITHOUT NEUTRAL

LUTRON HI-LUME® 1% 2-WIRE: 2-WIRE CONTROL FORWARD PHASE

5-40W, 120VAC, 2-WIRE FORWARD PHASE DRIVER

Dims to 1% with compatible Lutron controlsLUTRON HI-LUME® 1% 2-WIRE

LTEA4U1UKL-CV240

DESCRIPTIONPART

COMPATIBLE DRIVERS

DIMENSIONS

DIMMING PERFORMANCE

LUTRON HI-LUME® 1% 2-WIRE H 4.00”; W 4.89”; D 2.62”LUTRON HI-LUME®1% 2-WIRE

NEUTRAL-WIREDIMMER/MODULE/PANEL

FORWARD PHASE DIMMERWITHOUT NEUTRAL

LUTRON HI-LUME®1% 2-WIRE

24V DC -

24V DC -

24V DC +

24V DC +

LINE/HOTDIMMED LINE

(BLACK)

DIMMED LINE (BLACK)

NEUTRAL (WHITE)

NEUTRAL (WHITE)

NEUTRAL

LINE/HOT

NEUTRAL

NEUTRAL

Optic Arts is a Lutron OEM Advantage Partner






13 of 14

3-WIREDIMMER/MODULE/PANEL

3-WIRE

ECOSYSTEM

LUTRON HI-LUME® 1%: 3-WIRE/ECOSYSTEM

5-40W, 120-277VAC, 3-WIRE/ECOSYSTEM DRIVERL3DA4U1UKL-CV240

DESCRIPTIONPART

COMPATIBLE DRIVERS

DIMENSIONS

DIMMING PERFORMANCE

LUTRON HI-LUME® 1% 3-WIRE/ECOSYSTEM

H 4.00”; W 4.89”; D 2.62”

Dims to 1% with compatible Lutron controlsLUTRON HI-LUME® 1% 3-WIRE/ECOSYSTEM



24V DC -

24V DC +

LINE/HOT

TO ECOSYSTEM DIGITAL LINK

E1 (Purple)

E1 (Purple)

SWITCHED LINE(BLACK)

DIMMED LINE (ORANGE)

DIMMED LINE (ORANGE)

E2 (Purple)

E2 (Purple)

NEUTRAL (WHITE)NEUTRAL

LINE/HOT

NEUTRAL

NEUTRAL

24V DC -

24V DC +







14 of 14

3-WIRE

ECOSYSTEM

LUTRON HI-LUME® PREMIER: 3-WIRE/ECOSYSTEM

COMPATIBLE DRIVERS

2-96W, 120-277VAC, 3-WIRE/ECOSYSTEM DRIVERL3D0-96W24V-U

DESCRIPTIONPART

DIMENSIONS

DIMMING PERFORMANCE

LUTRON HI-LUME® PREMIER H 5.5”; W 10.5”; D 2.0”

Dims to 0.1% with compatible Lutron controlsLUTRON HI-LUME® PREMIER

LUTRON HI-LUME®PREMIER DRIVER

LUTRON HI-LUME®PREMIER DRIVER

(WITH ECOSYSTEM CONTROL & SOFT-ON FADE TO BLACK TECHNOLOGY)

NOTE: Lutron soft-on, fade to black technology available with Ecosystem Digital Control only.

24V +

24V +

24V -

24V -

E1 (Purple)

SWITCHED LINE/HOT (L)

DIMMED HOT (DH)

E2 (Purple)TO ECOSYSTEM

DIGITAL LINK

120-277 VAC

3-WIREDIMMER/MODULE/PANEL

LINE/HOT

NEUTRAL

NEUTRAL


focus optics technolog f.o.t. specification sheetcut+sheet.pdf · 6/21/2019 · focus optics...

Documents