floor care · 2018. 7. 16. · floor care for use on vinyl, rubber, linoleum, marble, terrazzo...

1
Floor Care For use on vinyl, rubber, linoleum, marble, terrazzo & sealed floor surfaces Easy StripFast acting floor polish stripper Sure StripFloor polish stripper EnhanceUltra high solids floor polish Mexapol High solids floor polish Sus-tain Medium solids floor polish Clean & ShineNeutral perfumed floor maintainer High ClassNeutral hard surface cleaner & floor maintainer PREPARE - POLISH STRIPPING Place wet floor caution signs. Sweep floor Add EASY STRIP or SURE STRIP to hot water in mop bucket Mop solution onto section of floor. Leave for five minutes Scrub surface using floor machine and BLACK floor pad Remove all slurry residue with wet pick-up or mop After using EASY STRIP - providing all slurry residue is completely removed it is not necessary to rinse, but check floor is neutral After using SURE STRIP - rinse with cold water and neutralise floor EASY STRIP is also suitable for mop or spray stripping - refer to label PROTECT - POLISH APPLICATION Place wet floor caution signs. Ensure floor is clean, dry and neutral Pour polish into bucket or tray Place mop or applicator into polish, lightly squeeze out surplus Alternatively, pour polish directly onto floor in a thin line Spread polish thinly and evenly in WEST to EAST direction Leave to dry, approximately 30 minutes Apply a further coat of polish thinly and evenly in a NORTH to SOUTH direction Leave a 15cm gap at floor edge Leave to dry, approximately 30 minutes If required further coats of polish can be applied MAINTAIN - SPRAY CLEAN OR MOP & DRY BURNISH SPRAY CLEANING & BURNISHING Place wet floor caution signs. Sweep floor Add CLEAN & SHINE or HIGH CLASS to cold water in a hand spray Spray floor lightly, approximately 1 metre in front of machine Burnish to a shine using high-speed floor machine and RED floor pad MOP & DRY BURNISHING Place wet floor caution signs. Sweep floor Add CLEAN & SHINE or HIGH CLASS to warm water in mop bucket Mop floor with solution. Allow to dry Dry burnish using high-speed floor machine and WHITE floor pad For more information refer to EVANS FLOOR & CARPET CARE BROCHURE When stripping polish from a floor it is advisable to comply with good safe working practice and avoid standing on the wet solution. ® ® EVANS VANODINE INTERNATIONAL PLC Brierley Road, Walton Summit, Preston PR5 8AH England Tel: +44 (0)1772 322200 Fax: +44 (0)1772 626000 Email: [email protected] [email protected] Web: www.evansvanodine.co.uk ALWAYS READ, UNDERSTAND & ADHERE TO LABEL INSTRUCTIONS. ALWAYS WEAR PROTECTIVE SAFETY WEAR WHEN RECOMMENDED. ALWAYS CHECK MACHINE CABLES & PLUG BEFORE USE. Distributed by:

Upload: others

Post on 12-Sep-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Floor Care · 2018. 7. 16. · Floor Care For use on vinyl, rubber, linoleum, marble, terrazzo & sealed floor surfaces Easy Strip™ Fast acting floor polish stripper Sure Strip™

Floor Care For use on vinyl, rubber, linoleum, marble,terrazzo & sealed floor surfaces

Easy Strip™Fast acting floor polish stripper

Sure Strip™Floor polish stripper

Enhance™Ultra high solids floor polish

MexapolHigh solids floor polish

Sus-tainMedium solids floor polish

Clean & Shine™Neutral perfumed floor maintainer

High Class™Neutral hard surface cleaner & floor maintainer

PREPARE - POLISH STRIPPING● Place wet floor caution signs. Sweep floor● Add EASY STRIP or SURE STRIP to hot water in mop bucket● Mop solution onto section of floor. Leave for five minutes● Scrub surface using floor machine and BLACK floor pad● Remove all slurry residue with wet pick-up or mop● After using EASY STRIP - providing all slurry residue is completely removed it is not necessary to rinse, but check floor is neutral● After using SURE STRIP - rinse with cold water and neutralise floor

EASY STRIP is also suitable for mop or spray stripping - refer to label

PROTECT - POLISH APPLICATION● Place wet floor caution signs. Ensure floor is clean, dry and neutral● Pour polish into bucket or tray● Place mop or applicator into polish, lightly squeeze out surplus● Alternatively, pour polish directly onto floor in a thin line● Spread polish thinly and evenly in WEST to EAST direction● Leave to dry, approximately 30 minutes● Apply a further coat of polish thinly and evenly in a NORTH to SOUTH direction● Leave a 15cm gap at floor edge● Leave to dry, approximately 30 minutes

If required further coats of polish can be applied

MAINTAIN - SPRAY CLEAN OR MOP & DRY BURNISHSPRAY CLEANING & BURNISHING● Place wet floor caution signs. Sweep floor● Add CLEAN & SHINE or HIGH CLASS to cold water in a hand spray● Spray floor lightly, approximately 1 metre in front of machine ● Burnish to a shine using high-speed floor machine and RED floor padMOP & DRY BURNISHING● Place wet floor caution signs. Sweep floor● Add CLEAN & SHINE or HIGH CLASS to warm water in mop bucket● Mop floor with solution. Allow to dry● Dry burnish using high-speed floor machine and WHITE floor pad

For more information refer to EVANS FLOOR & CARPET CARE BROCHURE

When stripping polish from a floor it is advisable to comply with good safe working practice and avoid standing on the wet solution.

®

®

EVANS VANODINE INTERNATIONAL PLCBrierley Road, Walton Summit,Preston PR5 8AH EnglandTel: +44 (0)1772 322200 Fax: +44 (0)1772 626000Email: [email protected] [email protected]: www.evansvanodine.co.uk

● ALWAYS READ, UNDERSTAND & ADHERE TO LABEL INSTRUCTIONS.

● ALWAYS WEAR PROTECTIVE SAFETY WEAR WHEN RECOMMENDED.

● ALWAYS CHECK MACHINE CABLES & PLUG BEFORE USE.

Distributed by: