floating ball valves€¦ · floating ball valve figure number system revision: 111815 page 2fbv....

WWW.BERICVALVES.COM

floatingball valvesTECHNICAL DATA

Beric_Ball_Valve_2013_print.indd 1Beric_Ball_Valve_2013_print.indd 1 6/11/13 3:09 PM6/11/13 3:09 PM

*Notes1) Customer to specify schedule for BW, SW ends. XH is Beric std. for SW end.2) All bolting shall be selected based on the body/bonnet material. A105N shall be B7M/2HM and A350 LF2 shall be

L7M/7M.3) 3 mil ENP coating.4) Heat treated to meet NACE requirements.5) 316 SS sprial wound graphite gasket.6) Low Temp. NACE valves gear operators are supplied with low temp grease.7) Valve sizes 1/4" to 1 3/4" are designed and tested to API 608. 2" valve is available designed and tested to API 608 and 6D.

4 F3 - 06 - RF - A A R R

- - Ball Stem

4-FLOATING S1 - 150 #STD PORT 02" RF - RAISED FACE FLGD END A- 2 PCE P - A105N*(2) R - A182-F316 A - 4130/ENP*(3)

S3 - 300# STD PORT 2.5" FF - FLAT FACE FLGD END C - 3 PCE A- A216-WCB P - A105N/ENP*(3) O - 17-4PH*(4)

S6 - 600# STD PORT 03" NP- NPT S - A350-LF2*(2) R - A182-F316

S8- 800# STD PORT 04" TW- SW*(1) x THD H- A352-LCC

S9 - 900# STD PORT 05" SW- SOCKET WELD*(1) R - A182-F316

S15 - 1500# STD PORT 06" RJ - RING TYPE JOINT FLGD END J - A351-CF8M

F1 - 150# FULL PORT 08" BW - BUTTWELD END*(1)

F3 - 300# FULL PORT 10" RB - RAISED FACE X BUTTWELD*(1)

F6 - 600# FULL PORT ZZ - OTHER, SPECIFY 0 - 1 PCE Z - OTHER, SPECIFY Z - OTHER, SPECIFY Z - OTHER, SPECIFY

F8 - 800# FULL PORT 0A - 1/4" B - A216-WCC O - 17-4PH 1 - F6 (410)

F9 - 900# FULL PORT 0B - 3/8" C - A217-WC6 U - 17-4PH / STL 2 - 304 SS

F15 - 1500# FULL PORT 0C - 1/2" D - A217-WC9 V - 17-4PH / TC 3 - 310 SS

0D - 3/4" E - A217-C5 1 - F6 (410) 4- F316/316L

01 -1" F - A217-C12 2 - 304 SS 9 - MONEL

1A -1 1/4" G - A352-LCB 3 - 310 SS B - ALLOY 20

1C - 1 1/2" I - A351-CF8 4- F316/316L C - F321

1D - 1 3/4" K - A351-CF3 9 - MONEL D - F22

L - A351-CF3M B - ALLOY 20 E - F347

M- A351-CN7M C - F321 X - F51

N- A351-CF8C D - F22 Y - F53

Q- A890 CD3MN E - F347

T- A350-LF3 S - A350-LF2/ENP*(3)

W- A182 F304/304L X - F51X - A182 F51 Y - F532- A182-F55

4 - A182 F316/316L

Trim MaterialBody/BonnetDesignEnd ConfigurationSizeBore & ClassValve type

Floating Ball Valve Figure Number System

Revision: 111815 FBV

Design/Testing Standards and Features:1) Designed and Marked to API 608, 6D, CSA Z245.15-13, NACE MR 0175/ISO 15156, ASME B16.34, 16.5.2) Tested to API 6D, 608 and CSA Z245.15-13.3) Certified to API 607, 641.4) Quality Management System to API Q1, ISO 9001.5) Top works mounting pad per ISO 5211.6) Blow out proof stem design, Adjustable packing, Anti-static device, Locking device.7) CRN registration for all products.

6 F G - G N

Seat Primary Stem Seal Packing/Gaskets -3 - RPTFE (Cls 150, 300) F :$$FKM/VITON GLT (-50°F, NACE) G - GRAPHITE*(5) L - LEVER OPERATED N - NACE

4 - PEEK H - HNBR (HSN) (-50;F) P - PTFE B - BARE STEM B - PORTED RELIEF TO UPSTREAM6 - DEVLON V(Cls 600, 900, 1500) T - TFE G - GEAR OPERATED*(6) C - CRYOGENIC

(extension & testing per MSS-SP-134)7 - PCTFE (CRYO) A - ACTUATED D - BLEED VALVE

EB - EXT. BONNET

J - JACKETED

K - LIVE LOAD PACKING

R - CAVITY RELIEF VALVE

Z - OTHER, SPECIFY Z - OTHER, SPECIFY Z - OTHER, SPECIFY Z - OTHER, SPECIFY Z - OTHER, SPECIFY

A - MEMORY-RPTFE A - AFLAS

B - PEEK+graphite B - NBR (Buna-N, Nitrile)

C - DELRIN D - VITON DURO 90

D - F22 E- VITON GF

G - SS 316 K - KALREZ

S - STL N - NONE

T - TUNGSTEN CARBIDE P - PTFE (Lip seals)

1 - NYLON/MoS2 R - RPTFE (Lip seals)

2 - PTFE T - POLYMYTE ORANGE

5 - FEP V - VITON A (-20°F)

9 - VITON DURO 90 X - VITON AED (-30°F)

Operation OTHERSealing Components

Floating Ball Valve Figure Number System Cont.

Revision: 111815 TBV

(713) 673-2073 - Fax (713) 673-4641 - Toll Free (866) GO-BERIC (462-3742)

Rev. 111815 www.BericValves.com

Copyright 2015 FBV

4S1 SeriesCast Steel Ball Valve

Standard Port

DIMENSIONS

SIZE L B H W Weight Lbs/Kg

2 Inch 7.00 1.50 5.20 7.50 20.9 mm 178 38 132 190.0 9.5

3 Inch 8.00 1.97 4.28 9.25 41.9 mm 203 50.0 108.7 234 19

4 Inch 9.00 3.00 6.89 6.40 72.8 mm 229 76.0 175 162.5 33

6 Inch 15.50 3.94 7.85 8.75 127.9 mm 394 100.0 199.5 222.0 58

8 Inch 18.00 5.91 12.37 29.0 205.0 mm 457.0 150.0 314 738.0 93

10 Inch 21.00 7.87 N/A GO 352.7 mm 533 200 N/A GO 160

MATERIAL SPECIFICATIONS NO. Part Name Carbon Steel/304 Stainless Steel/316 LCC/304

1 Body A216 Gr. WCB A 351 Gr. CF8M A351 Gr. LCC 2 Retainer A216 Gr. WCB A 351 Gr. CF8M A351 Gr. LCC 3 Body Nut A194 Gr. 2H A194 Gr. 8A A194 Gr. 4 4 Body Stud A193 Gr. B7 A320 Gr. B8M A320 Gr. L7M 5 Gasket 304/Graphite 316/Graphite 316/Graphite6 Ball A182 Gr. F304 A182 Gr. F316 A182 Gr. F304 7 Seat P.T.F.E. P.T.F.E. P.T.F.E.8 Stem A182 Gr. F304 A182 Gr. F316 A182 Gr. F304 9 Anti-Static Device A182 Gr. F316 A182 Gr. F316 A182 Gr. F304

10 Packing Graphite Graphite Graphite 11 Gland A276 Gr. 304 A276 Gr. 316 A276 Gr. 304 12 Gland Plate A216 Gr. WCB A 351 Gr. CF8M A216 Gr. WCB 13 Stop Plate A570 A570 A570 14 Washer AISI SS304 AISI SS304 AISI SS304 15 Handle A216 Gr. WCB A216 Gr. WCB A216 Gr. WCB 16 Screw A193 Gr. B7 A320 Gr. B8M A320 Gr. L7

DESIGN: API 6D API 607/API 6FA ASME B16.34

TESTING: API 598

PRESSURE CLASS:FLANGED – 150

CONNECTIONS: FLANGED – ASME B16.5

ASME B16.10

NOTE:COMPONENTS MAY CHANGE ACCORDING TO VALVE SIZE. CONTACT BERIC FOR CERTIFIED DRAWINGS.

ADDITIONAL VALVE BODY AND TRIM MATERIALS AVAILABLE.


4F1 SeriesCast Steel Ball Valve

Full Port



Copyright 2015 FBV



ASME B16.10


1 Body A216 Gr. WCB A 351 Gr. CF8M A351 Gr. LCC 2 Body Nut A194 Gr. 2H A194 Gr. 8M A194 Gr. 4 3 Body Stud A193 Gr. B7 A193 Gr. B8 A193 Gr. L7M 4 Body Stud A193 Gr. B7 A193 Gr. B8 A193 Gr. B7 5 Retainer A216 Gr. WCB A 351 Gr. CF8M A351 Gr. LCC 6 Ball A276 Gr. 304 A276 Gr. 316 A276 Gr. 304 7 Seat P.T.F.E. P.T.F.E. P.T.F.E.8 Stem A182 Gr. F304 A182 Gr. F316 A182 Gr. F304 9 Anti-Static Device 304 SST 316 SST 304 SST

10 Packing Graphite Graphite Graphite 11 Gland A276 Gr. 304 A276 Gr. 316 A276 Gr. 304 12 Gland Plate A216 Gr. WCB A 351 Gr. CF8M A351 Gr. WCB 13 Screw A193 Gr. B7 A193 Gr. B8 A193 Gr. B7 14 Stop Plate ASTM A570 ASTM A570 ASTM A570 15 Washer 304 SST 316 SST 304 SST 16 Handle Adaptor A216 Gr. WCB A216 Gr. WCB A216 Gr. WCB 17 Handle ASTM A570 ASTM A570 ASTM A570 18 Nut A194 Gr. 2H A194 Gr. 8M A194 Gr. 2H 19 Bolt A193 Gr. B7 A193 Gr. B8 A193 Gr. B7

DIMENSIONS


2 Inch 7.00 1.97 4.5 9.18 20.9 mm 178 50 114.3 233.2 9.5

3 Inch 8.00 3.00 6.40 10.50 41.9 mm 203 76 162.5 266.7 19

4 Inch 9.00 3.94 7.87 8.87 72.8 mm 229 100.1 200 225 33

6 Inch 15.50 5.94 10.44 31.50 172.0 mm 394 150.9 265.4 800 78

8 Inch 18.00 7.94 13.62 GO 286.6 mm 457 201.7 345 GO 130

STANDARDS DESIGN:

API 6D, API 608 API 607/API 6FA ASME B16.34

TESTING: API 598





Standard Port



Copyright 2015 FBV



ASME B16.10

DIMENSIONS


2 Inch 8.50 1.50 4.30 9.25 32.0 mm 216.0 38.0 109.0 234.0 14.5

3 Inch 11.00 1.97 5.25 10.62 66.1 mm 282.0 50.0 132.5 270.0 30

4 Inch 12.00 2.99 6.62 11.41 121.3 mm 305.0 76.0 168.0 290.0 55

6 Inch 15.75 3.94 8.00 16.41 205.0 mm 400.0 100.0 203.0 417.0 93

8 Inch 19.75 5.91 12.37 29.00 260.1 mm 502.0 150.0 313.0 738.0 118

10 Inch 22.36 7.87 N/A GO 440.9 mm 568.0 200.0 N/A GO 200

MATERIAL SPECIFICATIONSNO. Part Name Carbon Steel/304 Stainless Steel/316 LCC/304

1 Body A216 Gr. WCB A 351 Gr. CF8M A351 Gr. LCC 2 Retainer A216 Gr. WCB A 351 Gr. CF8M A351 Gr. LCC 3 Body Nut A194 Gr. 2H A194 Gr. 8A A194 Gr. 4 4 Body Stud A193 Gr. B7 A320 Gr. B8M A320 Gr. L7M 5 Gasket 304/Graphite 316/Graphite 304/Graphite6 Ball A182 Gr. F304 A182 Gr. F316 A182 Gr. F304 7 Seat P.T.F.E. P.T.F.E. P.T.F.E.8 Stem A182 Gr. F304 A182 Gr. F316 A182 Gr. F304 9 Anti-Static Device A182 Gr. F316 A182 Gr. F316 A182 Gr. F304

10 Packing Graphite Graphite Graphite 11 Gland A276 Gr. 304 A276 Gr. 316 A276 Gr. 304 12 Gland Plate A216 Gr. WCB A 351 Gr. CF8M A216 Gr. WCB 13 Stop Plate A570 A570 A570 14 Washer AISI SS304 AISI SS304 AISI SS304 15 Handle A216 Gr. WCB A216 Gr. WCB A216 Gr. WCB 16 Screw A193 Gr. B7 A320 Gr. B8M A320 Gr. L7

STANDARDS DESIGN:

API 6D API 607/API 6FA ASME B16.34

TESTING: API 598





Full Port



Copyright 2015 FBV



ASME B16.10

NOTE: COMPONENTS MAY CHANGE ACCORDING TO VALVE SIZE. CONTACT BERIC FOR CERTIFIED DRAWINGS.



1 Body A216 Gr. WCB A 351 Gr. CF8M A351 Gr. LCC 2 Body Nut A194 Gr. 2H A194 Gr. 8A A194 Gr.4 3 Body Bolt A193 Gr. B7 A193 Gr. B8M A193 Gr. L7M 4 Gasket 304/Graphite 316/Graphite 304/Graphite 5 Retainer A216 Gr. WCB A 351 Gr. CF8M A351 Gr. LCC 6 Ball A276 Gr. 304 A276 Gr. 316 A276 Gr. 304 7 Seat PTFE PTFE PTFE8 Stem A276 Gr. 304 A276 Gr. 316 A276 Gr. 304 9 Anti Static Device 304SS 304SS 304SS

10 Packing Graphite Graphite Graphite 11 Gland A276 Gr. 304 A276 Gr. 316 A276 Gr. 304 12 Gland Plate A216 Gr. WCB A 351 Gr. CF8M A216 Gr. WCB 13 Bolt A193 Gr. B7 A193 Gr. B8M A193 Gr. B7 14 Stop Plate A570 Gr. 45 316SS A570 Gr. 45 15 Washer 304SS 316SS 304SS16 Handle Adaptor A216 Gr. WCB A216 Gr. WCB A216 Gr. WCB 17 Handle A570 A570 A57018 Nut A194 Gr. 2H A194 Gr. 8A A194 Gr. 2H 19 Bolt A193 Gr. B7 A193 Gr. B8M A193 Gr. B7

DIMENSIONS


2 Inch 8.50 1.97 5.43 15.75 33.10 mm 216 50 138 400 15

3 Inch 11.12 3.00 6.89 17.72 77.2 mm 282 76 175 450 35

4 Inch 12.00 3.94 7.87 17.72 123.5 mm 305 100 200 500 56

6 Inch 15.88 5.98 9.06 19.68 220.5 mm 403 152 230 300 100

8 Inch 19.75 8.00 11.42 15.75 352.7 mm 502 203 290 400 160

STANDARDS DESIGN:


TESTING: API 598



Standard Port



Copyright 2015 FBV



ASME B16.10


1 Body A216 Gr. WCB A 351 Gr. CF8M A351 Gr. LCC 2 Body Nut A194 Gr. 2H A194 Gr. 8A A194 Gr. 4 3 Body Bolt A193 Gr. B7 A193 Gr. B8M A193 Gr. L7M 4 Retainer A216 Gr. WCB A 351 Gr. CF8M A351 Gr. LCC 5 Gasket 304/Graphite 316/Graphite 304/Graphite6 Ball A276 Gr. 304 A276 Gr. 316 A276 Gr. 304 7 Seat PTFE PTFE PTFE8 Stem A276 Gr. 304 A276 Gr. 316 A276 Gr. 304 9 Anti Static Device 304SS 304SS 304SS


DIMENSIONS


3 Inch 14.00 1.97 5.68 18.00 mm 356.0 500.0 144.0 457.0

4 Inch 17.00 3.00 6.78 16.50 mm 432.0 76.0 172.0 417.0

6 Inch 22.00 4.02 9.12 21.00 mm 559.0 102.0 231.0 534.0

STANDARDS DESIGN:


TESTING: API 598





Full Port



Copyright 2015 FBV



ASME B16.10


1 Body A216 Gr. WCB A 351 Gr. CF8M A351 Gr. LCC 2 Body Nut A194 Gr. 2H A194 Gr. 8A A194 Gr. 4 3 Body Bolt A193 Gr. B7 A193 Gr. B8M A193 Gr. L7M 4 Gasket 304/Graphite 316/Graphite 304/Graphite 5 Retainer A216 Gr. WCB A 351 Gr. CF8M A351 Gr. LCC 6 Ball A276 Gr. 304 A276 Gr. 316 A276 Gr. 304 7 Seat PTFE PTFE PTFE8 Stem A276 Gr. 304 A276 Gr. 316 A276 Gr. 304 9 Anti Static Device 304SS 304SS 304SS


DIMENSIONS


2 Inch 11.50 1.97 5.70 17.70 58.4 mm 292 50 145 450 26.5

3 Inch 14.00 3.00 5.90 17.70 112.4 mm 356 76 150 450 51

4 Inch 17.00 3.94 9.10 21.30 165.3 mm 432 100 230 540 75

STANDARDS DESIGN:


TESTING: API 598






Copyright 2015 FBV

Cryogenic Service Ball ValveStandard & Full Port - Floating & Trunnion Mount

PRESSURE CLASS:FLANGED – 150, 300, 600, 900, 1500, & 2500


ASME B16.10

MATERIAL: CAST VALVES - ASTM A351 Gr. CF8M

FORGED VALVES – ASTM A182 Gr. F316/F316L

SEATS AND SEALS – P.T.F.E.

FEATURES: AVAILABLE WITH SINGLE OR DOUBLE PISTON SEALS.

EXTENDED BONNETS HAVE SUFFICIENT GAS COLUMN LENGTH TO KEEP THE STEM PACKING AWAY FROM THE COLD FLUID TO IMPROVE FUNCTIONALITY.

CLEANED AND DEGREASED FOR OXYGEN SERVICE.

ANTISTATIC DEVICE

RECOMMENDED FOR USE AT TEMPERATURES BELOW 50°F.

EXTENDED BONNET LENGTH ARE SUPPLIED TO THE LENGTHS SPECIFIED IN MSS SP-134 UNLESS OTHERWISE SPECIFIED.

STANDARDS DESIGN:

API 6D, API 608 API 607/API 6FA ASME B16.34 MSS SP-134

TESTING: API 598


floating ball valves€¦ · floating ball valve figure number system revision: 111815 page 2fbv....

Documents