flight connection powder coat paint x … auger. do not operate ... • easy installation • top...
TRANSCRIPT
X 1
00
Ser
ies
Au
ger
Do not operate equipment with safety devices removed.
Height (A) Height @ Scissor (B) Height @ Scissor (C) Height @ Scissor (D)
Raised Halfway Lowered Raised Halfway Lowered Raised Halfway Lowered Raised Halfway Lowered
X100-63 43' 7" 28' 2" 12' 22' 5" 14' 8'' 6' 9'' 24' 2'' 29' 4'' 32' 23' 4" 28' 10'' 31' 4''
X100-73 47' 10'' 30' 11' 2'' 25' 4'' 16' 4'' 6' 9'' 28' 33' 4'' 36' 27' 9'' 32' 11'' 35' 3''
X100-83 55' 3'' 34' 2'' 11' 8'' 28' 6'' 18' 1'' 6' 9'' 32' 1'' 38' 7'' 41' 9'' 29' 10'' 37' 5'' 40' 11''
X100-63 X100-73 X100-83
Tubing Gauge 14 Ga
Tube Connectors Heavy-duty 3/16" angle flange
Main Flighting 9" OD x 7 Ga stretched and welded with Wear Edge at critical points
Wear Edge (Reinforced Flight) Hopper, boot and inclined tube feature 10 Ga ribbon weld, Wear Edge technology
Flighting Shaft High strength 2" OD x 11 Ga tubing
Upper Bearing 1 ¼" pillow block greaseable ball bearing
Lower Bearing 1 ½" pillow block greaseable ball bearing
Tube Trussing 3/8" aircraft type galvanized steel cable
Hydraulic Lift 4" single acting cylinder
Undercarriage 4" x 8" scissor lift
Axle 3" x 6" tubing
Hub 6-bolt automotive type
Tires 16" TRF
PTO Shaft 14R constant velocity with one shear bolt 35R constant velocity with one shear bolt
Parking Jack 2000 lbs side wind
Sprocket & Chain #60
Low Profile Hopper Height 10.5"
Pressure Required to Raise Auger 1200 PSI 1400 PSI 1600 PSI
Power Required (Dry Wheat) 60 HP 65 HP 75 HP
Maximum Transport Height 13'8" 13'4" 13'4"
Wheel Tread 132" 132" 132"-180"
Tube Sections 10-25-25 20-25-25 20-20-20
X 100 Auger General Specifications
X 100 Height, Reach & Wheel Specifications
Box 39, 74 Main StreetRosenort, Manitoba
Canada R0G 1W0
Height i s measured from bottom of auger spout to ground.
REMEMBER
The Wheatheart X Series Features
FLIGHT CONNECTIONSquare one bolt flight connection provides improved performance.
WEAR EDGE TECHNOLOGYContinuous 10 Ga steel welded to flighting edge where most of the wear occurs. Standard on all Wheatheart augers at critical grain transfer points, including the hopper, boot and incline tube.
POWDER COAT PAINTWheatheart uses a premium powder coat on all painted parts for durability and a great looking finish.
GREASE ZERKSExternal grease zerks on all U-joints for ease-of-maintenance.
CLEAN OUTLarge hinged boot clean out - no tools needed.
SPOUT HEADSafety discharge spout head with large opening for ease access serviceability.
The X Series features over 75 proven performance enhancements. With a precision engineered, commercial strength, scissor lift frame and redesigned hopper, the X Series offers unmatched serviceability and X-treme durability.
Wheatheart’s 10" auger line now has the X-factor. The X 100 features the redesigned hopper, large sealed boot transition and scissor lift frame that you have come to know on the X 130 and X 160. The Wheatheart X 100 is now easier to use than ever before, available in 63', 73' and 83' lengths and capacity up to 6,600 bph.
X Series
wheatheart.com
FLEX SPOUTSDirects grain flow – reduces spillage. Available in regular or no-snag designs.
CORN SCREEN Up to 4' long. Available on all models. Factory installed on the swing hopper tube.
RIGHT ANGLE DRIVE Assists operation in limited space situations. Allows a full arc on opposite side of tractor.
REVERSER KIT Ability to reverse all flighting. Allows quick and easy clean out.
HYDRAULIC WINCHEasily lifts your low profile hopper for labour saving transport or repositioning.
Get the job done faster with Wheatheart’s Power Swing. Available in 12V Electric or Hydraulic drive, the Power Swing features:
• Easy installation • Top wind jack to adjust wheel traction• Two wheel drive design • Large lug tires for positive grip
REMOTE 12V ELECTRIC POWER SWING • Heavy-duty 12 volt motor• Position hopper from cab of truck• Large “easy grip” remote• Secondary control on tube if remote is not available
HYDRAULIC POWER SWING
• Hydraulic drive moves swing hopper• Convenient tube mounted control valve• Complete with hydraulic hoses
X 100 Features & Options Optional Features
Remote 12V Electric orHydraulic Power Swing
OVERFLOW PROTECTIONSpring loaded overflow protection lid on the spout head, guards against main auger overloading.
SEALED BOOT TRANSITION Improves grain flow and increases capacity while protecting the gear boxes from rain and corrosion.
TAPERED BOOT WITH LARGE CLEAN OUT Maintains maximum capacity when the auger is raised to its highest position. Can be easily opened and cleaned out without tools.
TRUSSINGHeavy-duty cable trussing standard on all lengths, providing maximum support with full bin reach.
ANGLE FLANGEWelded heavy-duty angle flange for rigid tube connections.
SINGLE CYLINDER HYDRAULIC LIFT Proven cylinder lift provides smooth, fast operation with minimal hydraulic requirements.
HOPPER LIFT ARMCan be quickly changed from the left or right hand side of the auger to give the operator the convenience of unloading on both sides.
WHEELS & EXTENDABLE AXLES Transport wheels are 16" with sturdy 6-bolt cast iron hubs. 48" axle extension on the 83' length for increased stability. Retraction offers reduced width for transport.
The 10.5" low profile hopper has all the performance standards you have come to expectfrom Wheatheart.
LOW PROFILE HOPPER
FEATURING
• Left and right hand flighting• Solid hopper tires• U-joints with external grease points for easy service• Hinged chain cover for quick inspection• 6" one piece rubber extension to prevent grain splashing
Low Profile Hopper
REMOVABLE BOOT FLIGHT Removable boot flight with Wear Edge to improve performance and durability of lower flighting.
SCISSOR LIFT FRAMEWheatheart’s scissor lift frame features square tube design with cross members for side-to-side sway reduction and more torsional stiffness to reduce twisting.
X 10
0 SE
RIES
AUG
ER 637383