flexgrow 4ms !#$% &' ()*+, -'...
TRANSCRIPT
Easily upgrade to LED Flexgrow 4MS
Please Contact:661-706-5285
MKB Energy SolutionsC: 661.706.5285
The MKB Flexgrow 4MS LED grow fixture delivers efficient performance, quality and versatility for horticulture applications of all types.
Compared to traditional light sources, the Flexgrow 4MS delivers up to 156 lm/w and increases energy savings by up to 80%. Its extruded aluminum heat sink provides optimal thermal management decreasing LED junction temperature, maintaining useful light output for years without replacement.
-60-80% Energy savings -Full Spectrum White Light
-Mercury free -200,000 hour life -Low heat
Model: Watts: Lumens: Comparable Light Source:
4MS 86W 12,870 4-Lamp T5HO, 250W Metal Halide
10
SPECIFICATION SHEETVERSION 3.1
WWW.FLEXTRONICS.COM/LIGHTING • [email protected] • 913-851-3000
Lusio® Essentials Series - Performance Line4 SHORT LED MODULES (4MS)
ABOUT THE SERIESFrom the award-winning Essentials family of LED fi xtures, the Performance Line delivers superior performance, quality and versatility for high bay applications. With up to 156 lm/W effi cacy and up to 80% lower power consumption compared to traditional fl uorescent and HID light sources, these fi xtures are designed to lower your total cost of ownership (TCO). Dedicated heat sinks ensure superior performance and extended useful life.
INTENDED USEManufacturing, Aircraft Hangars, Warehouses,
Convention Centers and Other Large Indoor SpacesTarget
Mounting Heights Comparable
Traditional Light SourceReduction in Power Consumption
over Traditional Light Source20-40 Feet (6-12m) 4-Lamp T5HO or 250W Metal Halide 63-70%
Fixture shown with optional integrated occupancy sensor and cable kit.
(sold separately)
FIXTURE PERFORMANCE
WATTAGE1 LUMENS1 EFFICACY1 CRI2
CA - CLEAR LENS4000K, LV 86 12,199 142 824000K, HV 89 12,391 140 825000K, LV 86 12,870 150 825000K, HV 89 13,072 147 82
FP - FROSTED LENS4000K, LV 86 11,087 129 824000K, HV 89 11,261 127 825000K, LV 86 11,696 136 825000K, HV 89 11,880 134 82
1 Typical at 277V (LV), 480V (HV) and 77°F (25°C). 2 Typical CRI.
DIMENSIONS
LENGTH1 WIDTH1 DEPTH1 WEIGHT WEIGHT WITH BATTERY BACK-UP
23-1/4 (59.1) 14 (35.6) 2-1/4 (5.7) 10 (4.5) 14 (6.4)1 Dimensions listed are for the fi xture only. See dimensional drawings for measurements with mounting hardware.
IN (CM) • LB (KG)
FEATURES & SPECIFICATIONS POWER AND CONTROL
• POWER INPUT: 120-480V (50/60Hz)• DIMMING: 0-10V dimming standard. Capable of dimming down to 10%. • OCCUPANCY SENSORS: Optional factory installed occupancy sensors
are available. See accessories ordering information.• EMERGENCY BATTERY BACK-UP: Ordered separately as optional
accessory, EMB is available, producing 2000-2200 lumens for a minimum of 90 minutes. Fixtures are manufactured EMB ready and EMB is installed in the fi eld
LUMEN MAINTENANCE• L70 LIFE: 95% lumen maintenance at 60,000 hours (77°F/25°C
ambient); L70 predicted life is more than 200,000 hours.
FIXTURE• ENVIRONMENT: Dry/Damp. For interior applications (IP30).• HEAT SINKS: Extruded aluminum heat sinks provide optimal
thermal management, decreasing LED junction temperature and ensuring long life.
• POWER SUPPLY ACCESS: Center channel cover is hinged for easy access to power supplies and quick wiring.
• MOUNTING: Fixture is cable ready and has a center opening to accept a 3/4” stem mount. Cable, stem or surface mount options.
• LENSES: UV stable clear or frosted polymeric material. Consult chemical resistance chart for guidance in selecting appropriate lens for your application
• WIRE GUARDS: Optional wire guards can be field installed. See accessories ordering information.
• WARRANTY: Up to 10-year limited warranty. • AMBIENT OPERATING TEMPERATURES: (refer to ordering guide)
AMBIENT OPERATING TEMPERATURES: (refer to ordering guide)CRM and HOOK fi xtures: -41°F to 131°F (-40° to 55°C)MBR fi xtures: -40°F to 122°F (-40° to 50°C)EMB fi xtures: 32°F to 122°F (0° to 50°C)(Temperatures below -20° have limited switch cycles. Consult factory for details.)
LISTINGS AND CERTIFICATIONS• ETL listed (UL 1598)• RoHS Compliant• FCC Class B• Lighting Facts (U.S. Department of Energy) Certifi ed • DesignLights™ Consortium Approved
POWER FACTOR
120V 0.99277V 0.93347V 0.98480V 0.96
TOTAL HARMONIC DISTORTION
120V 7.6%277V 16.8%347V 10.4%480V 12.4%
WWW.FLEXTRONICS.COM/LIGHTING • [email protected] • 913-851-3000
LUSIO® ESSENTIALS SERIES PRODUCT GUIDE
12
4 SHORT LED MODULES (4MS)
DIMENSIONS: INS (CMS)
BOTTOM VIEW23-1/4 (59.1)
14 (35.6)
SIDE VIEW
TOP VIEWEND VIEW
11-7/8 (30.2)
TOP VIEW
TOP VIEW
2-1/4 (5.7)
CABLE READY MOUNT (CRM)
FIXTURE MOUNTING BOX (MBR)
FIXTURE MOUNTING BOX (EMB)
SIDE VIEW
SIDE VIEW
END VIEW
END VIEW
4-1/4(10.9)
4-7/8 (12.4)
16 (40.6)
4 (10.4)
3-3/4 (9.5)
3-3/8 (8.5)
Please Contact:661-706-5285
MKB Energy SolutionsC: 661.706.5285
2700 KELVIN
5000 KELVIN
Six low-profi le models 2700K, 4000K or 5000K color
temperatures 120-degree light distribution Cable, stem or surface mounting
options Side mount option to maximize light
penetration Multiple voltage options available L95 at 60,000 hours L70 predicted life is more than 200,000
hours Dry/Damp interior applications (IP30) 8 lbs to 24 lbs (varies by model) 5-year limited warranty
www.flextronics.com/lighting+1-913-851-3000 • lighting@fl extronics.com
FlexGrow P-SeriesKEY FEATURES
FlexGrow P-Series LED high bay fi xtures deliver effi cient performance, quality and versatility for horticulture applications. Compared to traditional light sources, FlexGrow P-Series LED fi xtures deliver up to 156 lm/w and increase energy savings by up to 80%. Its extruded aluminum heat sink provides optimal thermal management decreasing LED junction temperature, maintaining useful light output for years without replacement.
MODEL LUMENS* WATTAGE COMPARABLE TRADITIONAL LIGHT SOURCE
2MS 6,596 44W 4-Lamp T8, 175W Metal Halide, 2-lamp T5HO
4MS 13,335 88W 4-Lamp T5HO, 250W Metal Halide
6MS 20,070 130W 6-Lamp T5HO or 8-lamp T8, 320W, 400W, or 450W Metal Halide
2M 13,335 88W 4-Lamp T5HO, 250W Metal Halide
4M 26,670 176W 6-Lamp T5HO, 400W Metal Halide
6M 40,140 260W 8-Lamp T5HO, 750W Metal Halide
* Based upon models with Clear Acrylic lens and 5000K CCT.
LED Fixtures for Horticulture ApplicationsMKB-Grow P Series
MKB-Grow
MKB-Grow
11
SPECIFICATION SHEETVERSION 3.1
WWW.FLEXTRONICS.COM/LIGHTING • [email protected] • 913-851-3000
Lusio® Essentials Series - Performance Line4 SHORT LED MODULES (4MS)
ORDERING EXAMPLE: ES3P-UL-4MS-50-WIDE-CA-LV-CRM-10V-OCCN-CORDN-EMBN
COLOR TEMP
404000K
505000K
UL
COMPLIANCE
UL
4MS
MODEL
4MS4 Modules Short
WIDE
DISTRIBUTION
WIDEWide Distribution
*Aisle Lighter Option Available
ES3P
SERIES
ES3PEssentials Series -Performance Line
*High Output Option Available
ACCESSORIES: Must be ordered separately. Packaged separately.
Type Part Number Description
CABLE KITSAFETY CABLE
CABLEKITSAFETYCABLE
Kit includes 10 ft Gripple aircraft “Y” cables and snap hooks (one pair).Kit includes (one) 5 ft Gripple aircraft cable with single snap hook.
WIRELESS PROGRAMMER FOR DIMMABLE OCCUPANCY SENSOR(S) OCCDIMPROG Handheld wireless programmer for setup OCCDIMXX dimmable occupancy sensors.
Required with OCCDIM20 and OCCDIM40 selection.
DAINTREE WIRELESS CONTROL KITS
ES3-DAINTES3-DAINTOCC
Kit includes Daintree Wireless Fixture Adapter, wiring harness and screws.Kit includes Daintree Wireless Controller with integral occupancy sensor and (2) lens options (20’ or 40’ ceiling height).
WIREGUARDS ES3-WG-XX Wire guard protects LED modules from impact. Kit includes mounting hardware. XX = Indicate fixture model (Ex. 2MS, 2M. 4MS, 4M, 6MS, 6M).
REPLACEMENT POWER SUPPLY
ES3-PS-UL-LV-75WES3-PS-UL-LV-150WES3-PS-UL-HV-75WES3-PS-UL-HV-150W
Field replaceable power supply, 120/277V, 75W, for 2MS model only.Field replaceable power supply, 120/277V, 150W, for 2M, 4M, 4MS, 6M, and 6MS models.Field replaceable power supply, 347/480V, 75W, for 2MS model only.Field replaceable power supply, 347/480V, 150W, for 2M, 4M, 4MS, 6M, and 6MS models.
EMERGENCY BATTERY BACKUP KIT ES3-EMBLV Emergency battery backup suitable for a minimum 90 minutes of emergency operation, when normal
power is unexpectedly interruped. Required with “EMBR” selection.
VOLTAGE
LV120-277V
HV347-480V
MOUNTING
CRM6
Cable-ready (standard) and has center opening
to accept a 3/4” stem.
MBR1
Field installed mounting kit, including fixture mounting box and bracket for surface mount applications
HOOK1
Field installed mounting kit, including fixture
mounting box with hook, fixture mounting bracket, and one pair of leveling
cables. For hook/loop applications
10V
DIMMING
10V0-10V Interface
(standard)
CORD & PLUG
CORDNNo cord/plug (standard)
C6W1, 9
6ft cord, 15A, no plug
C15W1, 9
15ft cord, 15A, no plug
C5151, 9
6ft cord, 15A, straight plug 120V (5-15P)
CL5151, 9
6ft cord, 15A, locking plug 120V (L5-15P)
CL7151, 9
6ft cord, 15A, locking plug 277V (L7-15P)
CL7201, 9
6ft cord, 20A, locking plug 277V (L7-20P)
CL24201, 9
6ft cord, 20A, locking plug 347V (L24-20P)
CL8201, 9
6ft cord, 20A, locking plug 480V (L8-20P)
1 Optional add-on. See price list for pricing. 2 Optional add-on for 120-277V only. High voltage options available as special order with longer lead time. Contact factory for pricing and lead time. 3 Daintree options do not include Daintree ControlScope SoftwareTM, wireless connection hardware/infrastructures, or field commissioning. Consult Daintree for more information and ordering assistance. 4 Optional add-on available in 120-277V only. 5 Wireless programmer required for final field setup. See ACCESSORIES. 6 Optional CABLEKIT ordered separately. See ACCESSORIES. 7 Field installed EMB KIT must be ordered with this option. See ACCESSORIES. 8 Field installed Daintree Wireless Control kit must be ordered with this option. See ACCESSORIES. 9All cords are 16/3 AWG, 600V, and white. 10Consult factory for orders requiring DAINTR and EMBR.
BATTERY BACK-UP
EMBNNo emergency battery
back-up (standard)
EMBR1, 4, 7, 10 Fixture is EMB-Ready,
with test button, indicator lamp and wiring harness
factory installed
LENS
CAClear Lens
FPFrosted Lens
OCC SENSORS
OCCNNo Sensor (standard)
OCC201, 2
Occ Sensor, on/off 20' Mounting Height
OCC401, 2
Occ Sensor, on/off 40’ Mounting Height
OCCDIM201. 4. 5
Occ Sensor, dimmable 20’ Mounting Height
OCCDIM401. 4. 5
Occ Sensor, dimmable 40’ Mounting Height
DAINTR1. 3, 4, 8, 10
Fixture is factory-wired for easy integration of
Daintree Wireless controls
2700 KELVIN
5000 KELVIN
Six low-profi le models 2700K, 4000K or 5000K color
temperatures 120-degree light distribution Cable, stem or surface mounting
options Side mount option to maximize light
penetration Multiple voltage options available L95 at 60,000 hours L70 predicted life is more than 200,000
hours Dry/Damp interior applications (IP30) 8 lbs to 24 lbs (varies by model) 5-year limited warranty
www.flextronics.com/lighting+1-913-851-3000 • lighting@fl extronics.com
FlexGrow P-SeriesKEY FEATURES
FlexGrow P-Series LED high bay fi xtures deliver effi cient performance, quality and versatility for horticulture applications. Compared to traditional light sources, FlexGrow P-Series LED fi xtures deliver up to 156 lm/w and increase energy savings by up to 80%. Its extruded aluminum heat sink provides optimal thermal management decreasing LED junction temperature, maintaining useful light output for years without replacement.
MODEL LUMENS* WATTAGE COMPARABLE TRADITIONAL LIGHT SOURCE
2MS 6,596 44W 4-Lamp T8, 175W Metal Halide, 2-lamp T5HO
4MS 13,335 88W 4-Lamp T5HO, 250W Metal Halide
6MS 20,070 130W 6-Lamp T5HO or 8-lamp T8, 320W, 400W, or 450W Metal Halide
2M 13,335 88W 4-Lamp T5HO, 250W Metal Halide
4M 26,670 176W 6-Lamp T5HO, 400W Metal Halide
6M 40,140 260W 8-Lamp T5HO, 750W Metal Halide
* Based upon models with Clear Acrylic lens and 5000K CCT.
LED Fixtures for Horticulture ApplicationsMKB-Grow P Series
MKB-Grow
MKB-Grow
27 2700K