fitting instructions - nexus door hinge · 7 8 adjust sash as necessary 9 fit cover and caps ensure...
TRANSCRIPT
![Page 1: Fitting instructions - Nexus Door Hinge · 7 8 Adjust sash as necessary 9 Fit cover and caps Ensure the adjuster sledge screw is flush with the edge of the sledge 4 Press compression](https://reader034.vdocuments.mx/reader034/viewer/2022050409/5f8644e98ce2b3707f11a2b4/html5/thumbnails/1.jpg)
Nexus Door HingeFitting Instructions
Position jig over centered sash & frame and pre-drill
1
ERA, Straight Road, Willenhall, West Midlands. WV12 5RATel: +44 1922 490049 Fax: +44 1922 494420 Email: [email protected]
Installing a Nexus Door Hinge
www.erahomesecurity.com
Fit sash to frame and fix coverwith the screws (included)
7 Fit cover and caps9Adjust sash as necessary8
Ensure the adjuster sledge screw is flush with the edge of the sledge
4 Press compression bush into body with alignment markfacing away from the sash
6Fix flag to sash. Use 25mm screws into the cover leg
5
4.8x45
4.8x454.8x25
Locate peg into slot and firmlypush hinge into the body
3Add packers if required &fix body using 3x 45mm screws
2
4.0MM
+.75 -.75mm
-7.0 +3.0mm
+4.0 -1.0mm
ADJUST SCREW
85mm
100mm