fitter inst

Question Booklet and Answer-Keys Fitter Instructor

FI-6 (English Version) - Page 1

ENGLISH VERSION 1H fiZE/ x'V/, wZMK pzBQ/ ikD HHHHH

(A) jt/bh (B) tkVk (C) sp/bk (D) vzrotkVk

2H j/m fby/ pdK ftZu'A fJZe tuB u[D' L

(A) b (B) coBhuo (C) w[zv/ (D) x'Vk

3H T[;B/ w/oh fJZe nktk th BjhA ;[Dh, tke dh fejVh fe;w WL

(A) fwfos (B) ;kXkoB (C) ;z:[es (D) e'Jh th BjhA

4H [ZX w[jktok u[D' L

(A) ukdo t/y e/ g?o g;koB/ (B) ukdo i'Ve/ g?o g;koB/ (C) ukdo y'be/ g?o g;koB/ (D) ukdo X' e/ g?o g;koB/

5H fefonk dhnK fezBhnK fe;wK j[zdhnK jBL

(A) uko (B) d' (C) fszB (D) gzi Directions(Q. No. 6-8):- Out of the four given options, choose the correct preposition to be filled in the blanks:- 6. We travelled __ Mr Joshis car. (A) of (B) from (C) in (D) by

7. We travelled ___ train. (A) of (B) in (C) by (D) from

8. I will go __ the 7.30 bus. (A) in (B) by (C) on (D) with

Directions(Q. No. 9-10) :- Out of the four given options, choose the correct opposite of the words given below:- 9. Sever (A) Severe (B) Hard (C) Join (D) Separate

10. Tenable (A) Defensible (B) Orthodox (C) Indefensible (D) Terrible

11. What is the name of original copy of Guru Granth Sahib? A) Kartarpuri B) Shabad Puri C) Bhagwan Puri D) Sarv Puri

12. On which of the following river the foundation stone of Shahpur kandi yojana was laid down?

A) Beas B) Ravi C) Satluj D) None of these

13. The capital of Punjab and East Punjab States Union(PEPSU) was at: A) Amritsar B) Nabha C) Faridkot D) Patiala


14. The plains of Punjab are made of A) Black Soil B) Red Soil C) Alluvial Soil D) Laterite Soil

15. The Vedic research institute is situated at which of the following in Punjab: A) Jalandhar B) Kapurthala C) Patiala D) Hoshiarpur

16. Palak leaves are rich in A) vitamin A B) vitamin D C) iron D) carotene

17. Invisible export means export of: A) Services B) Prohibited goods C) Unrecorded goods D) Goods through smuggling

18. Which of the following States has no Panchayati Raj Institution at all? A) Assam B) Kerala C) Tripura D) Nagaland

19. The southern tip of India is: A) Cape Camorin B) Point Calimere C) Indira Point in Nicobar Islands D) Kovalam in Trivandrum

20. Name the Cricketer and Former Captain of the Australian Cricket team who on December 3, 2012 announced his retirement from International Test Cricket

A) Ricky Ponting B) Adam Gilchrist C) Shane Warne D) Michael Clarke

21. Choose the odd one out. A) Walk B) Pull C) Hear D) Jumps

22. If light is called morning, morning is called dark, dark is called night, night is called sunshine and sunshine is called dusk, when do we sleep?

A) Night B) Sunshine C) Dusk D) Dark

23. In a joint family, there are father, mother, 3 married sons and one unmarried daughter. Of the sons, two have 2 daughters each, and one has a son. How many female members are there in the family?

A) 2 B) 3 C) 6 D) 9

24. Pointing to a woman, Naman said, She is the daughter of the only child of my grandmother. How is the woman related to Naman?

A) Sister B) Niece C) Cousin D) Data inadequate

25. In a March Past, seven persons are standing in a row. Q is standing left to R but right to P. O is standing right to N and left to P. Similarly, S is standing right to R and left to T. Find out who is standing in the middle.

A) P B) Q C) R D) O

26. Students line up in a queue in which Ashish stands fifteenth from the left and Sachin is seventh from the right. If they interchange their places, Sachin would be fifteenth from the right. How many students are there in the queue?

A) 21 B) 22 C) 29 D) None of these

27. Going 50 m to the South of her house, Radhika turns left and goes another 20 m. Then, turning to the North, she goes 30 m and then starts walking to her house. In which direction is she walking now?

A) North-west B) North C) South-east D) East


28. Read the trend of characters in the following matrix and find out the missing character.

85 20 5

126 24 6

175 ? 7

A) 22 B) 24 C) 26 D) 28

29. If the positions of the first and the sixth digits of the number 2796543018 are interchanged, similarly the positions of the second and the seventh digits are interchanged and so on, which of the following will be the third to the left of seventh digit from the left end?

A) 0 B) 1 C) 7 D) 8

30. In the series 10, 17, 24, 31, 38, which of the following will be a number of the series?

A) 48 B) 346 C) 574 D) 1003

31.

= ?

A) B)

C) 1 D) 2

32. The average of marks scored by the students of a class is 68. The average of marks of the girls in the class is 80 and that of boys is 60. What is the percentage of boys in the class?

A) 40% B) 60% C) 65% D) 70%

33. Five years ago, Vinays age was one-third of the age of Vikas and now vinays age is 17 years. What is the present age of Vikas?

A) 9 years B) 36 years C) 41 years D) 51 years

34. A man sells tea at 10% profit and uses a weight which is 20% less than the actual measure. His gain percent is:

A) 30% B) 35% C) 37

% D) None of these

35. A can do a piece of work in 14 days which B alone can do in 21 days. They begin together but 3 days before the completion of the work, A leaves off. The total number of days for the work to be completed is

A) 6 days B) 8

days C) 10

days D) 13

days

36. A constable is 114 m behind a thief. The constable runs 21 m and the thief 15 m in a minute. In what time will the constable catch the thief?

A) 16 min B) 17 min C) 18 min D) 19 min

37. A borrows 800 at the rate of 12% per annum simple interest and B borrows 910 at the rate of 10% per annum simple interest. In how many years will their amounts of debts be equal?

A) 18 years B) 20 years C) 22 years D) 24 years


38. A rectangle measures 8 cm on length and its diagonal measures 10 cm. What is the perimeter of the rectangle?

A) 36 cm B) 38 cm C) 28 cm D) 18 cm

39. At what angle the hands of a clock are inclined at 15 minutes past 5? A) 58

B) 64o C) 67

D) 72

40. A bell rings every 5 minutes. A second bell rings every 6 minutes and if the two bells ring at the same time in the morning, then the next time they will ring together at

A) 8:30 oclock B) 9 oclock C) 10 oclock D) 12 oclock

41. As a teacher will you maintain your relationship with your critics? A) yes B) no C) to some extent D) cant say

42. The first stage of learning is A) coordination B) manipulation C) imitation D) none of these

43. Which one of the following optimizes motivation to learn? A) personal satisfaction in meeting targets B) extrinsic factor C) motivation to avoid failure D) tendency to choose very easy or difficult goals

44. To make assessment a useful and interesting process, one should be careful about A) using a variety of ways to collect information about students learning across scholastic

and co-scholastic boundaries B) using technical language to give feedback C) making comparison between different students D) labeling students as intelligent or average learners

45. A school is miniature of A) state B) society C) family D) organization

46. Operation Blackboard movement provides A) education to every child B) training to teachers to use blackboard C) facility of blackboard D) basic facilities in primary schools

47. The education ends A) after attaining Ph.D. B) after attaining D.Litt. C) after getting service D) it never ends

48. The real cause of the students adopting unfair means in the examinations? A) they have too much money B) they are not fully prepared C) they do not study D) they have to face difficult competition

49. A bright student who is openly impatient of the errors and slowness of other students in the class and wishes to answer much more than his share of questions and asks irrelevant questions, the teacher should

A) tell him to ask only his share of questions B) allow him to answer as many as questions as he wants C) lower his grade whenever his behavior become objectionable D) make him realize that he does not gain through such behavior


50. Communication in the classroom will be effective if A) it is delivered slowly and clearly B) it is delivered in a peaceful atmosphere C) it reaches the students completely D) it reaches the students as intended by the teacher

51. Which device of computer operation dispenses with the use of the keyboard (a) Joystick (b) Light pen (c) Mouse (d) Touch

52. Which of the following is not computer hardware? (a) Mouse (b) Monitor (c) Antivirus (d) Printer

53. A local area network (a) that connects thirty personnel computers can provide more computing power than a minicomputer (b) controls error detection and correction (c) constructs packets of data and sends them across the network (d) None of these

54. A string of eight 0s and 1s is called a (a) megabyte (b) byte (c) kilobyte (d) gigabyte

55. Word processing, spreadsheet, and photo-editing are examples of (a) application software (b) system software (c) operating system software (d) platform software

56. Surface plate is used to check the trueness of (a) curved surfaces (b) round surface (c) flat surfaces (d) none of these

57. The type of file used for a wood work is (a) single-cut file (b) double cut file (c) rasp-cut file (d) any one of these

58. The chisel used for cutting key ways is (a) flat chisel (b) cape chisel (c) round nose chisel (d) diamond pointed chisel

59. The temperature of oxy-hydrogen flame is __________ oxy-acetylene flame (a) same as (b) less than (c) more than (d) all of the above

60. A saw which cuts wood during the return stroke of the saw is known as (a) pullsaw (b) push saw (c) both (a) & (b) (d) none of the above

61. The fullers are used (a) for finishing flat surfaces (b) for necking down a piece of work (c) for punching a hole (d) to finish the punched hole

62. The cold chisels are made by (a) rolling (b) piercing (c) forging (d) drawing

63. The instrument which has all the features of try-square, bevel protractor, rule and scriber, is

(a) outside micrometer (b) inside micrometer (c) depth gauge micrometer (d) combination set

64. The cross-section of a chisel is usually (a) hexagonal (b) octagonal (c) square (d) rectangular


65. A plug gauge is used to check the diameter of shafts and studs (a) Correct (b) Incorrect (c) cannot say (d) all of the above

66. In back-hand welding, the angle between the welding torch and the work is kept as (a) 30-40 (b) 40-50 (c) 50-60 (d) 60-70

67. The electrodes used in spot welding have a tip of (a) stainless steel (b) aluminium (c) copper (d) brass

68. In __________ welding, the weld may be made either from left to right or from right to left

(a) fore-hand (b) back-hand (c) horizontal (d) Vertical

69. Which of the following statement is wrong? (a) The mortise gauge has two scribing pins (b) The gouges are chisels with a hollow shaped blade (c) An auger is a planning tool (d) all of these

70. A file removes the metal during (a) forward stroke (b) return stroke (c) both forward and return strokes (d) none of these

71. In order to cut mild steel, the cutting angle of chisel should be (a) 30 (b) 45 (c) 50 (d) 60

72. The operation of straightening a curved sheet metal, is known as (a) coining (b) planishing (c) squeezing (d) drawing

73. A rip saw (a) is a two man saw (b) is used for cutting along the grains of wood (c) has a narrow blade with two wooden handles (d) all of the above

74. The cutting edge of a chisel should be (a) hardened (b) tempered (c) hardened and tempered (d) case hardened

75. In order to check the clearance between two mating surfaces, a __________ gauge should be used

(a) ring (b) plug (c) feeler (d) snap

76. A mortise gauge is a (a) striking tool (b) planing tool (c) boring tool (d) marking tool

77. The teeth of hacksaw blade are bent (a) towards right (b) towards left (c) alternately towards right and left and every third or fourth left straight (d) may be bent in any direction

78. For cutting brass, the hacksaw blade should have __________ teeth per 25 mm (a) 14 (b) 24 (c) 32 (d) 40


79. The cold chisels are made from (a) cast iron (b) mild steel (c) high speed steel (d) cast tool steel

80. To prevent the body of the blade from jamming in the saw cut, the teeth of blade are (a) strengthened (b) sharpened (c) lubricated (d) all of these

81. A ring gauge is used to (a) check the diameter of shafts or studs (b) test the accuracy of holes (c) check the clearance between two mating surfaces (d) all of the above

82. The oxy-acetylene gas used in gas welding produce a flame temperature of (a) 1800C (b) 2100C (c) 3200C (d) 2400C

83. In fore-hand welding, the angle between the welding rod and the work is kept as (a) 30-40 (b) 40-50 (c) 50-60 (d) 0-70

84. The width of slot cut by a hacksaw blade is __________ the width of the blade (a) equal to (b) less than (c) greater than (d) all of the above

85. A hacksaw blade cuts on the (a) forward stroke (b) return stroke (c) both forward and return strokes (d) cutting depends upon the direction of force

86. The oxygen cylinder is usually painted with (a) white colour (b) black colour (c) maroon colour (d) yellow colour

87. In fore-hand welding, the angle between the welding torch and the work is __________ as compared to back-hand welding.

(a) same (b) less (c) more (d) can not say

88. Lap joints are employed on plates having thickness (a) less than 3 mm (b) 5 to 10 mm (c) 12.5 mm (d) above 25 mm

89. A file with 50 - 60 teeth in 25 mm is called (a) Round file (b) Bastard file (c) Rasp cut file (d) Square file

90. Which of the following lathe is most widely used as a precision lathe? (a) engine lathe (b) speed lathe (c) bench lathe (d) tool room lathe

91. For taper turning, the centre used is (a) ordinary centre (b) tipped centre (c) ball centre (d) none of the above

92. Gripping capacity is more for (a) independent chuck (b) self centering chuck (c) both (a) & (b) (d) none of the above 93. The lathe bed is made up of (a) mild steel (b) alloy steel (c) pig iron (d) cast iron

94. Accidents are prevented by (a) Personal care (b) Fire prevention (c) Safe work habits (d) All of the above

95. When you refer to SI units, you are talking about the (a) metric system (b) inch system (c) FPS system (d) all of the above


96. An excess quantity of oxygen is mixed with acetylene for burning and obtaining (a) Natural flame (b) Oxidizing flame (c) Carburizing flame (d) None of above

97. Vernier calipers measure (a) Outside diameter (b) Depth (c) Inside width (d) All of the above

98. The position in which it is easiest to weld is (a) Flat (b) Horizontal (c) Vertical (d) None of these

99. The following parts move along the ways (a) The tail stock (b) The cross slide (c) The carriage (d) Both (a) and (c)

100. Surface roughness on a drawing is represented by (a) triangles (b) circles (c) squares (d) rectangles


Answer- Key

FI-6(Fitter Instructor)

Q. Ans. Q. Ans Q. Ans. Q. Ans.

1 C 26 C 51 C 76 D

2 D 27 A 52 C 77 C

3 B 28 D 53 B 78 A

4 A 29 B 54 B 79 D

5 B 30 B 55 A 80 D

6 C 31 D 56 C 81 A

7 C 32 B 57 C 82 C

8 C 33 C 58 B 83 A

9 C 34 C 59 B 84 C

10 C 35 C 60 A 85 A

11 A 36 D 61 B 86 B

12 B 37 C 62 C 87 C

13 D 38 C 63 D 88 A

14 C 39 C 64 B 89 B

15 D 40 A 65 B 90 B

16 C 41 C 66 B 91 C

17 A 42 C 67 C 92 A

18 D 43 A 68 C 93 D

19 C 44 A 69 C 94 D

20 B 45 B 70 A 95 A

21 C 46 D 71 D 96 B

22 B 47 D 72 B 97 D

23 D 48 B 73 B 98 A

24 A 49 D 74 C 99 D

25 B 50 D 75 C 100 A

fitter inst

Documents