~fip~~7ifft1: model 10 flake ice maker specification sheet … · ~fip~~7ifft1: model 10 flake ice...

2
~fIP~~7ifft1: MODEL 10 FLAKE ICE MAKER SPECIFICATION SHEET STANDARD FEATURES Double walled, stationary evaporator. No refrigerant seals to leak. Attached accumulator for complete gas- liquid refrigerant separation. (Flooded operation) Available with either a solid carbon or stainless steel freezing surface. Patented drip shield to insure complete water- ice separation. Protection and safety features include mechanical load limit switch, emergency stop switch, jog switch, inspection hatch safety switch and a drive belt guard. Stainless steel water make-up tank and ice removal tools are standard. Other stainless steel options are available. Machine available for shipboard installation to produce seawater ice. Economical, compact, simple to install and operate with minimal maintenance. Polyurethane insulation enclosed in molded fiberglass covers. LIFETIME WARRANTY on North Star evaporators and PERFORMANCE GUARANTEE. North Star Ice Equipment Corporation PO Box 80227 + Seattle, WA 98108 USA + (206) 763-7300 + 1-800-321-1381 Fax: (206) 763-7323 + E-mail: [email protected] + Web Site: www.northstarice.com

Upload: phungdang

Post on 08-Dec-2018

223 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: ~fIP~~7ifft1: MODEL 10 FLAKE ICE MAKER SPECIFICATION SHEET … · ~fIP~~7ifft1: MODEL 10 FLAKE ICE MAKER SPECIFICATION SHEET STANDARDFEATURES • Double walled, stationary evaporator

~fIP~~7ifft1:

MODEL 10 FLAKE ICE MAKERSPECIFICATION SHEET

STANDARD FEATURES• Double walled, stationary evaporator. No

refrigerant seals to leak.• Attached accumulator for complete gas- liquid

refrigerant separation. (Flooded operation)

• Available with either a solid carbon or stainlesssteel freezing surface.

• Patented drip shield to insure complete water-ice separation.

• Protection and safety features include mechanicalload limit switch, emergency stop switch, jogswitch, inspection hatch safety switch and a drivebelt guard.

• Stainless steel water make-up tank and iceremoval tools are standard. Other stainlesssteel options are available.

• Machine available for shipboard installation toproduce seawater ice.

• Economical, compact, simple to install andoperate with minimal maintenance.

• Polyurethane insulation enclosed in moldedfiberglass covers.

• LIFETIME WARRANTY on North Starevaporators and PERFORMANCE GUARANTEE.

North Star Ice Equipment Corporation PO Box 80227 + Seattle, WA 98108 USA + (206) 763-7300 + 1-800-321-1381Fax: (206) 763-7323 + E-mail: [email protected] + Web Site: www.northstarice.com

Page 2: ~fIP~~7ifft1: MODEL 10 FLAKE ICE MAKER SPECIFICATION SHEET … · ~fIP~~7ifft1: MODEL 10 FLAKE ICE MAKER SPECIFICATION SHEET STANDARDFEATURES • Double walled, stationary evaporator

~~7//S"MtI;North Star Modell 0 Operating Data

TOP VIEW

Refrigerant Control: Sporlan Levelmaster

WEIGHT:VOLUME:DRIVE MOTOR:PUMP MOTOR:SUCTION LINE:LIQUID LINE:

1,350 Ibs - 612 kg70 cu ft - 1.9 cu mtr0.33. HP0.05 HP1 1/2" Sch 803/4" Sch 80

32"[813mm)

40 5/8'[1032mm)

18' r457mm]MINI~UMCLEARANCE

36 1/2'[978mmJ

ICE MAKING CAPACITY RANGE GUIDELINE

20"[506mm]

1/2" MPT

1/2" FPT3/4" FPT1/4" FPT1/2" FPT

REFRIGERANT CAPACITY REFRIGERATION REQUIREMENT(Volume .68 Cubic Feet - .02 Cubic Meters) (Tons of Refrigeration Per Ton of Ice)

Freon 56 Ibs Freon 531bs Water Temperature 40 50 60 70 80R-134a: (25 kg) R-404a: (24 kg) ofFreon 51 Ibs Ammonia: 261bs Tons of 1.20 1.25 1.30 1.40 1.50R-22: (23 kg) R-717 (12 kg) Refrigeration

SIDE VIEW

OIL DRAIN LINE:WATER LINE:

Tank Inlet:Tank Drain:Pump Outlet:Flow Control Valve Inlet:

Evaporator+5 0 -5 -10 -15 -20 -25 -30Temperature (oF)

Stainless Steel Model 1.9 2.3 2.7 3.2 3.6 3.8 4.0 4.22.6 3.0 3.5 3.9 4.3 4.5 4.7 4.8

Carbon Steel Model 2.1 2.7 3.2 3.8 4.4 4.7 5.0 5.03.0 3.5 4.0 4.6 5.0 5.6 6.0 6.2

'Capacity based on tons (2,000 pounds) per 24 hours, 1.5 to 2.0mm ice thickness, 60°F make-up water, and oil-free ammoniarefrigerant. For other operating conditions and specific capacities, refer to our capacity curves or visit the Ice Maker Selection Toolon our web site at www.northstarice.com. Capacities in italics are 2.0mm ice thickness.

WATER REQUIREMENT: 0.167 GPM PER TON OF ICE PER 24 HOURS

THERE'S ONLY ONE NORTH STARNorth Star Ice Equipment Corporation PO Box 80227 + Seattle, WA 98108 USA + (206) 763-7300 + 1-800-321-1381

Fax: (206) 763-7323 E-mail: [email protected] + Web Site: www.northstarice.com