fincan kalıp

Upload: liselio

Post on 05-Apr-2018

230 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/31/2019 fincan kalp

    1/11

    Cepheskelesi Sistemleri / Facade Scaffolding Systems

    125

    Cup-lock Type Facade Scaffolding SystemFincanl Tip Cephe skelesi

    Fincanl Tip skele Sistemi hem ar yk tayc hem de cepheiskelesi olarak kullanlan bir sistemdir.Sadece eki kullanlarak seri bir ekilde montaj ve demontaj ya-plr. Paralar zerinde olduu iin kaybolma riski yoktur. Emni-

    yetli ve hzl bir birleim salama imkan verir. Herhangi bir kama,somun gibi elemanlara ihtiya olmadan yatay elemanlar ile deyelemanlarn birleimi kolaylkla salanmaktadr. Ayar krikolar vas-tas ile ykseklik ayar kolaylna sahiptir. Sistem alt ve st ncanl

    dikmelerden ve dikmelerin burkulmasn nleyen dveme balklyatay elemanlarn birbiri ile balantsndan olumaktadr.Fincanlar 5 mm sacdan imal edilmektedir ve dikmelere kaynaklabalanmtr. Bu ncanlar zerinde sfero dkm olarak imal edilen

    ve yatay elemanlarn kilitlenmesini salayan hareketli kapaklar bu-lunmaktadr. Yatay ve dey elemanlarn balants ile rijit bir sis-tem oluturulduundan, burkulma emniyetli, yk tama kapasitesiyksek ve emniyetli iskele kurulumu salanmaktadr.

  • 7/31/2019 fincan kalp

    2/11

    Cepheskelesi Sistemleri / Facade Scaffolding Systems

    126

    Cup-Lock scaffolding system can be used both as high load bearing

    capacity, under mold shoring scaffold and as facade work-on scaffold.

    Erection and dismantle are made by usage of a hammer in a serial

    manner. Since all parts stays attached to system, there is no risk of

    being lost. It provides a speedy and safe connection possibility. Con-

    nections of horizontal and vertical components can be enabled easilywithout need of any wedge or nut. By the help of the adjustable jacks,

    height adjustment can be done easily. System consist of props with up-

    per and lower cups and horizontal components with forged head ends

    which prevents twisiting of props.

    Cups are made from 5mm thick sheet-iron and welded to props. These

    cups have nodular casted mobile caps over them which provides inter-

    locking of horizontal components. Since a rigid system is assembled byhorizontal and vertical components connections, twisting resistance,

    high load bearing capacity and safe scaffold erection provided.

  • 7/31/2019 fincan kalp

    3/11

    Cepheskelesi Sistemleri / Facade Scaffolding Systems

    127

    rn KoduItem No

    Arlk kgWeight kg

    rn AklamasDescription

    2.40

    4.75

    7.10

    9.50

    12.00

    14.30

    2025048301050

    2025048302100

    2025048303150

    2025048304200

    2025048305250

    2025048306300

    DKME ELEMANI / 50 cm.FNCAN ARALIKLI

    Prop component /with 50 cm. cup-lock gap

    48x3 mm borudan retilir.Borularda;Her 50 cm de ncan ve st tasbulunmaktadr. Fincanlar 5 mm ka-lnlnda A1 kalitte elikten retilir.st taslar sfero dkmdr. Kay-naklar otomatik gaz alt robotlar ileyaplr.

    Made from dia 48x3mm tubeTubes are furnished with cups andupper vessel at every 50 cm dis-

    tance Cups are made of A1 qualitysteel of 5mm thickness Upper ves-sels are nodular casted. Welding ismade by automatic robots.

    H=50 cm. (1 ncan/cup)

    H=100 cm. (2 ncan/cup)

    H=150 cm. (3 ncan/cup)

    H=200 cm. (4 ncan/cup)

    H=250 cm. (5 ncan/cup)

    H=300 cm. (6 ncan/cup)

    4.10

    6.10

    8.00

    10.00

    12.00

    2025048301100

    2025048302150

    2025048302200

    2025048303250

    2025048303300

    DKME ELEMANI / 100 cm.FNCAN ARALIKLIProp component /with 100 cm. cup-lock gap

    48x3 mm borudan retilir.Borularda;Her 100 cm de ncan ve st tas bu-lunmaktadr. Fincanlar 5 mm kalnl-nda A1 kalitte elikten retilir. sttaslar sfero dkmdr. Kaynaklar

    otomatik gaz alt

    robotlar ile yap

    l

    r.

    Made from dia 48x3mm tubeTubes are furnished with cups andupper vessel at every 100 cm dis-tance Cups are made of A1 qualitysteel of 5mm thickness Upper vesselsare nodular casted. Welding is madeby automatic robots.

    H=100 cm. (1 ncan/cup)

    H=150 cm. (2 ncan/cup)

    H=200 cm. (2 ncan/cup)

    H=250 cm. (3 ncan/cup)

    H=300 cm. (3 ncan/cup)

  • 7/31/2019 fincan kalp

    4/11

    Cepheskelesi Sistemleri / Facade Scaffolding Systems

    128

    rn KoduItem No

    Arlk kgWeight kg

    rn AklamasDescription

    2.50

    3.40

    4.80

    6.00

    7.60

    9.00

    0.682025040250025

    2026048250070

    2026048250100

    2026048250150

    2026048250200

    2026048250250

    2026048250300

    YATAY BALANTI ELEMANIHorizontal ConnectionComponent (Ledger)

    48x2.5 mm borudan retilir.Her iki ucuna dvme elikten yaplanbademler kaynatlmtr.

    Made from TSE certified tubes ofdia 48x2.5mm. Forged steel ledger bladeswelded to both ends.

    L= 70 cm.

    L= 100 cm.

    L= 150 cm.

    L= 200 cm.

    L= 250 cm.

    L= 300 cm.

    ALT AYAR ELEMANILower adjustment component

    Mil 35 mm apnda, dolu milden, karedili vidal ve sfero dkm somunludur.Taban plakas 150x150x5mm. sacdan ka-bartmal olarak imal edilmektedir.

    Adjustable jack is in a diameter of 35

    mm, solid webbed, square shape threa-ded and with a nodular custed nut. Baseplates are made in embossed style, out of150x150x5 mm sheet-iron.

    H= 50cm.

    H= 75cm.

    4.65

    6.20

    2027035001050

    2027035001075

    7.50

    8.20

    2026000000070

    2026000000100

    L=70 cm.

    L=100 cm.

    KONSOLConsole

    48x2.5 mm borudan imaldir.Saak ve balkon kntlarnda iskeleyida tarmada kullanlr.

    Made of dia 48x2.5 tube. Used for thepurpose of expanding scaffolding out-wards at place of eaves and balcony pro-trusion.

    NPELVertical Component Connector

    Dikme elemanlarnn birbirne balantsiin kullanlr. 40x2.50mm borudan, 25 cm uzunlu-unda imal edilmektedir.

    Used for connecting the vertical components

    to eachother. Made from dia 40x2.5 mmtube with a height value 25 cm.

  • 7/31/2019 fincan kalp

    5/11

    Cepheskelesi Sistemleri / Facade Scaffolding Systems

    129

    rn KoduItem No

    Arlk kgWeight kg

    rn AklamasDescription

    42.50

    39.00

    35.75

    2028000253020

    2028000252520

    2028000252020

    L H

    3 m 2 m

    2.5 m 2 m

    2 m 2 m

    MERDVENStair

    2 mm. sacdan imal olup,cephe iskelesi uygulamasnda kullanlr.

    Made of 2mm sheet iron for use on facadescaffolding applications.

    7.40

    11.20

    14.70

    16.25

    20.00

    24.00

    2028010028070

    2028010028100

    2028010028150

    2028010028200

    2028010028250

    2028010028300

    L=70

    L=100

    L=150

    L=200

    L=250

    L=300

    YRME PLATFORMU (SAC KALAS)Walking platform (Steel Plank)

    Eni 28 cm olan 2mm sacdan imaldir.Deiik ebat ve zelliklerde retilebilmektedir.

    Made from 2mm thick sheet iron of width 28cm. Custom production possible at varying fe-

    atures and dimensions.

    6.35

    5.50

    4.65

    2028001003020

    2028001002520

    2028001002020

    MERDVEN KORKULUUStair Guard Rail

    27x2 mm borudan imal edilir.

    Made from dia 27x2 mm tube.

    L H

    3 m 2 m

    2.5 m 2 m

    2 m 2 m

    ALT AYAR ELEMANI + TEKERLEKLower Adjustable ComponentWith Wheel

    Gezer i iskelesi uygulamalarnda kullanlr.

    Used in applications involving mobile scaf-folding for performing work on.

    7.102020013500000 H= 50 cm

  • 7/31/2019 fincan kalp

    6/11

    Deme Kalp Sistemleri / Slab Formwork Systems

    80

    Cup-lock Type Scaffolding SystemFincanl Tip skele Sistemi

    Fincanl Tip skele Sistemi hem yksek yk tayc hem de cepheiskelesi olarak kullanlan bir sistemdir.Ar demelerde ve yksek yaplarda kullanlan, mukavemeti veemniyet deerleri yksek bir yk iskelesi sistemidir. zellikle kalpalt tayc iskele olarak kullanlr. Kurulum ve skm olduka ko-laydr.Sadece eki kullanlarak seri bir ekilde montaj ve demontaj ya-plr. Paralar zerinde olduu iin kaybolma riski yoktur. Emniyetlive hzl bir birleim salama imkan verir. Herhangi bir kama, so-mun gibi elemanlara ihtiya olmadan yatay elemanlar ile dey ele-manlarn birleimi kolaylkla salanmaktadr. Alt ve st ayar krikola-r vastas ile ykseklik ayar kolaylna sahiptir. Sistem alt ve st

    ncanl dikmelerden ve dikmelerin burkulmasn nleyen dvemebalkl yatay elemanlarn birbiri ile balantsndan olumaktadr.Fincanlar 5 mm sacdan imal edilmektedir ve dikmelere kaynaklabalanmtr. Bu ncanlar zerinde sfero dkm olarak imal edilenve yatay elemanlarn kilitlenmesini salayan hareketli kapaklar bu-lunmaktadr. Yatay ve dey elemanlarn balants ile rijit bir sis-tem oluturulduundan, burkulma emniyetli, yk tama kapasitesiyksek ve emniyetli iskele kurulumu salanmaktadr. rnek ola-rak 50 cm ncan aralkl bir dikme 4 tarafndan yatay elemanlarlabalandnda yaklak 6 ton eksenel yk tayabilmektedir. Fincanaral 100 cm olan dikmede ise tama kapasitesi yaklak 5 tonolmaktadr.

  • 7/31/2019 fincan kalp

    7/11

    Deme Kalp Sistemleri / Slab Formwork Systems

    81

    Cup-Lock scaffolding system can be used both as high load bearing

    capacity, under mold shoring scaffold and as facade work-on scaffold.

    It is a highly resistant and safeload bearing system used at applica-

    tions like heavy slabs and high structures. It is very simple to erect and

    dismantle.

    Erection and dismantle are made by usage of a hammer in a serial

    manner. Since all parts stays attached to system, there is no risk of

    being lost. It provides a speedy and safe connection possibility. Con-

    nections of horizontal and vertical components can be enabled easily

    without need of any wedge or nut. By the help of the upper and lower

    adjustable jacks, height adjustment can be done easily. System consist

    of props with upper and lower cups and horizontal components with

    forged head ends which prevents twisiting of props.

    Cups are made from 5mm thick sheet-iron and welded to props. These

    cups have nodular casted mobile caps over them which provides inter-

    locking of horizontal components. Since a rigid system is assembled by

    horizontal and vertical components connections, twisting resistance,

    high load bearing capacity and safe scaffold erection provided. For ex-

    ample, Prop with 50cm cup gaps that connected from 4 sides by hori-

    zontal components has 60KN axial load bearing capacity. Props with

    100cm cup gaps has 50KN axial load bearing capacity approximately.

    81

  • 7/31/2019 fincan kalp

    8/11

    Deme Kalp Sistemleri / Slab Formwork Systems

    82

    FNCANLI SKELE YK TAIMA KAPASTES

    CUP-LOCK SCAFFOLDING LOAD BEARING CAPACITY

    Burkulma Hesaplar TS 648, DIN 4114 Teknik Kriterlerine gre yaplmtr.Twisting calculations made compliance to TS 648, DIN 4114 technical criterias.

    Dikey Balant Aral / Vertical Connection Gap Dikey Eksenel Yk/ Vertical Axial Load

    82

  • 7/31/2019 fincan kalp

    9/11

    Deme Kalp Sistemleri / Slab Formwork Systems

    83

    rn KoduItem No

    Arlk kgWeight kg

    rn AklamasDescription

    2.40

    4.75

    7.10

    9.50

    12.00

    14.30

    2025048301050

    2025048302100

    2025048303150

    2025048304200

    2025048305250

    2025048306300

    DKME ELEMANI / 50 cm.

    FNCAN ARALIKLIProp component /with 50 cm. cup-lock gap

    48x3 mm borudan retilir.Borularda;Her 50 cm de ncan ve st tasbulunmaktadr. Fincanlar 5 mm ka-lnlnda A1 kalitte elikten retilir.st taslar sfero dkmdr. Kay-naklar otomatik gaz alt robotlar ileyaplr.

    Made from dia 48x3mm tube

    Tubes are furnished with cups andupper vessel at every 50 cm dis-tance Cups are made of A1 qualitysteel of 5mm thickness Upper ves-sels are nodular casted. Welding ismade by automatic robots.

    H=50 cm. (1 ncan/cup)

    H=100 cm. (2 ncan/cup)

    H=150 cm. (3 ncan/cup)

    H=200 cm. (4 ncan/cup)

    H=250 cm. (5 ncan/cup)

    H=300 cm. (6 ncan/cup)

    4.10

    6.10

    8.00

    10.00

    12.00

    2025048301100

    2025048302150

    2025048302200

    2025048303250

    2025048303300

    DKME ELEMANI / 100 cm.FNCAN ARALIKLIProp component /with 100 cm. cup-lock gap

    48x3 mm borudan retilir.Borularda;Her 100 cm de ncan ve st tas bu-

    lunmaktad

    r. Fincanlar 5 mm kal

    nl

    -nda A1 kalitte elikten retilir. sttaslar sfero dkmdr. Kaynaklarotomatik gaz alt robotlar ile yaplr.

    Made from dia 48x3mm tubeTubes are furnished with cups andupper vessel at every 100 cm dis-tance Cups are made of A1 qualitysteel of 5mm thickness Upper vesselsare nodular casted. Welding is madeby automatic robots.

    H=100 cm. (1 ncan/cup)

    H=150 cm. (2 ncan/cup)

    H=200 cm. (2 ncan/cup)

    H=250 cm. (3 ncan/cup)

    H=300 cm. (3 ncan/cup)

  • 7/31/2019 fincan kalp

    10/11

  • 7/31/2019 fincan kalp

    11/11

    Deme Kalp Sistemleri / Slab Formwork Systems

    rn KoduItem No

    Arlk kgWeight kg

    rn AklamasDescription

    5.10DRT YOLLU BALIK ASFour-Way Heading AS

    Balk 165x250x8 mm. sac plakadan imaldir.

    Kulaklar 40x40x4 mm. den boru 40lik boru-dan imaldir.

    Heading is made from 165x250x8 mm sheet-iron plate. Ears are made from 40x40x4 mmsheet-iron. Tube has a diameter of 40 mm.

    2027040255020

    2027035003050

    2027035003075

    4.38

    6.20

    U BALIKLI ST AYAR ELEMANIUpper adjustment componentwith U-head

    Balk 5 mm. sac plakadan imaldir.

    Mil 35 mm apnda, dolu milden, karedili vidal ve sfero dkm somunludur.Ykseklik ayarlamalarnda, beton alt ka-lp dikmelerinde kullanlr.

    Heading is made from 5mm thick sheetiron. Adjustable jack is in a diameterof 35 mm, solid webbet, square shapethreaded and with a nodular casted nut.Used for height adjustments with under-mold props.

    H=50 cm.

    H=75 cm.

    5.95

    7.75

    2027035004050

    2027035004070

    T BALIKLI ST AYAR ELEMANIUpper adjustment component withT-head

    Balk 5 mm. sac plakadan imaldir.Mil 35 mm apnda, dolu milden, kare dilividal ve sfero dkm somunludur. Ykseklikayarlamalarnda, kiri alt kalp dikmelerindekullanlr.

    Heading is made from 5mm thick sheet iron.Adjustable jack is in a diameter of 35 mm,solid webbet, square shape threaded and witha nodular casted nut. Used for height adjust-ments with under beam mold props.

    H=50 cm.

    H=70 cm.

    7.50

    8.20

    2026000000070

    2026000000100

    L=70 cm.

    L=100 cm.

    KONSOLConsole

    48x2.5 mm borudan imaldir.Saak ve balkon kntlarnda iskeleyida tarmada kullanlr.

    Made of dia 48x2.5 tube. Used for thepurpose of expanding scaffolding out-

    wards at place of eaves and balcony pro-trusion.