SMS Mobile Alert (GSM TECHNOLOGY) PLC Features

Network Connection via Ethernet

? PLC Based Control System Make - Allen Bradley

?PC Communication Via Ethernet

?PLC Based Scanner System

?PLC Based Safety Control System to Protect the Chambers from Overshoot and Undershoot

of Temperature and Humidity

?Auto Changeover of Master Sensor In Case of Failure

?Auto Switch Over of Refrigeration System in Case of Failure

?Auto Change Over of Steam Generator in Case of Failure

?Online Monitoring on Graphic LCD 3.8" Touch Screen Display

?Alarm for Low Water Level with Reset System to Protect Steam Generator System.

?Password Protected Door Opening with Reason Master.

?Password Protected Chamber On / Off.

?Password Protected Set Value Change

? Password Protected Settable Print Frequency F or Master & Scanner

?? Password Protected Restore Factory Setting

?Snooze Hooter System.

?Event Logger Facility.

?Actual Status Monitoring of Major Utilities (Sensor, Ref System, Steam Generation).

?GSM Alarm System (Mobile Aler t).

For information log on: www.mackpharmatech.com For information log on: www.mackpharmatech.com

PLC System

Setting Parameters

Safety Cut Off Details

Crucial Controls

Events

Set Master Temperature / Humidity

Change Master / Scanner Print Frequency

Set Safety Temperature Higher / Lower Cut Off (°CHC1, °CHC2, °CLC1, °CLC2)

Set Safety Humidity Higher / Lower Cut Off (%RH HC1, %RH HC2, %RH Lc1)

Temperature Higher Cut Off ON / OFF

Temperature Lower Cut Off ON / OFF

Humidity Higher Cut Off ON / OFF

Humidity Lower Cut Off ON / OFF

Power ON / OFF

Equipment Switch ON / OFF

Cooling ON / OFF

Humidity ON / OFF

Heating ON / OFF

Door OPEN / CLOSE

Steam Generator A FAILURE / OK

Steam Generator B FAILURE / OK

High Temperature Thermostat ON / OFF

Compressor Auto / Manual Mode Setting Change

Change Compressor Cycle Time Changeover

Steam Generator Changeover Time Delay

Setting Parameters

Safety Cut Off Details

Crucial Controls

Events

Touch Screen Display

Password Based Door Access System

PLC Based Password Protected Door Access System With Reason Master:

The door access system grant permission based on password entered.

When access is granted, the door is unlocked for a predetermined time.

This transaction is recorded through DAAS software with a reason given by user.

This record will reflect in Event Audit Trail with Date Time stamp.

PLC Based Auto changeover Master Sensor In Case Of Failure:

Sensor measures temperature and relative humidity.

When controlling sensor fails, it automatically switches over to stand by sensor.

Auto changeover Master Sensor