fimo liquid steam punk

8/11/2019 FIMO Liquid Steam Punk

1/6

1

You can find our products inwell-stocked sales outlets.

Should you have any queries,please call our hotline:+49 (0)911 9365-888.

Have fun crafting!

Shopping / material list

Steam Punk

Steam PunkSurrealistic recycling jewellery the latest in trendy fashion styles. With FIMO,

FIMO liquid, push moulds and parts of old watches or mechanical disc drives,you can create true originals in a retro-futuristic look. Its certainly worth

taking a look around flea markets or your grandads old workshop.

Image transfer the ideal technique for transforming motifs from yourfavourite pictures into unique accessories

For crafting: Scissors, smooth surface, combi pliers, round nose pliersFor decorating: Rope chain, silver (with 5 strands, please test first to see if they fit

through the holes of the ring frame) Gold wire or eyelet pins,approx. 4 cm long 2 earring hooks, gold nish, 20 mm long each Silver tubes, approx. 15 mm long Silver beads approx. 3 mm

You will need these STAEDTLER articles:

Product Colour Art. No. Quantity 3

FIMO liquid Transparent 8050-00 BK 1

FIMO soft White 8020-0 1

FIMO effect Gold 8020-11 1

Push mould Ornaments -- 8725 08 1

FIMO accesso ires, round f rame -- 8625 21 2

Metallic powder Gold 8709 BK 1

Gloss varnish -- 8703 01 BK 1

Bead-piercing needles -- 8712 20 1

Acrylic roller -- 8700 05 1Modelling tools -- 8711 1

Blades -- 8700 04 1

Oven thermometer -- 8700 02 1

You can find more creative tips at www.staedtler.com

Level of difficultyeasy medium hard


2/6

1 2 3

Then press a little gold FIMO effect into this gold-dusted

FIMO accessoires push mould.

Use the blade or kitchen knife to cut off any excess FIMO.

This leaves the motif with an even, smooth back.

Cut the eyelet pins to size and press horizontally into the

mould. Then demould the ornament i.e. push it carefully

out of the push mould from the back.

For the decorative ornaments, brush a little gold metallicpowder into the FIMO accessoires push mould.

2

Instructions for earrings and pendants

Cleaning:

After use, wipe the mould clean using a damp clothas traces of colour may otherwise show on subse-quent colours (use FIMO to dab out any left-over

bits). Then clean with soap and water.

Tip:

The use of metallic powder, talc or baby powderfacilitates demoulding.




3/6

4 5 6

7

3

First print out the pattern sheet for the eyes and clock andcover all over with a thin layer of FIMO liquid.

Please note:Do not leave any areas uncovered.

Cut the motifs out, place them on the baking tray, weighthem down with magnets or coins and harden in the ovenat 130C for approx. 20 minutes.

Instructions for the clock using image transfer

Cleaning:

Clean dirty brushes and clothing with acetone ororange peel oil.

Storage:

Store FIMO liquid at room temperature and avoidcontact with PVC or polystyrene.

After hardening, allow the motifs to cool and then cutthem out.

Gently rub the paper off in lukewarm water. A thin layermay remain. Then leave to dry.

TIP:

Larger motifs should be weighed down while dryingtoo in order to avoid rippling.




4/6

8 9 10

4

Instructions for the clock

11 12 13

For the clock, roll white FIMO out to an approx. 2 mm thicksheet. Roll half a strip of FIMO effect in metallic gold tomake an approx. 2 mm thick length of string.

Place the FIMO liquid image transfer onto the white sheetof FIMO and press on a little. Then position the goldenFIMO string around it.

Add a push mould ornament at the side and cut thewhole object out with a ki tchen knife.

Brush around the edge with gold-coloured metallic powder. Cut an eyelet pin to size; stick it through the ring frameand into the edge of the clock at the top. It should atleast extend to the middle of the pendant. Use FIMOliquid to stick hands on.

Next, thread the ring frames onto a bead-piercing

needle and fill them with white FIMO. Place the image-transferred eyes from steps 4 - 7 on top.




5/6


6/6

6

Pattern sheetSteam punk is a new fashion trend which uses elements from

steam and cogwheel drive mechanisms. Different FIMO liquidtechniques can be used here, e.g. embedding, image transfer,colour effects. Simply use old watches, alarm clocks or othermechanical parts to craft totally new creations. There are nolimits to what you can make.



fimo liquid steam punk

Documents