filtomat m100/mg filters - water filtration systems -...

flow rates minimum operating pressure

water for cleaning filtration degrees

M100: up to 1,760 gpm(400 m3/h)

MG: up to 3,520 gpm (800 m3/h)

30 psi (2 bar) less than 1% of the total flow 500-80 micron

features:

Hydraulic self-cleaning screen filters, with no external power source requiredFiltomat M100/MG Filters

• Reliable operating mechanism

• Simple construction and easy maintenance

• Ideal solution for agricultural filtration requirements

• Automatic flushing according to pressure differential

• No interruption of downstream flow during flushing

• High reliability and durability

• Hydraulic or electronic control

How the Filtomat Filters Work

General

The Amiad Filtomat M100 and MG Series are automatic, self-cleaning filters, ideal for remote installation sites, with a

water-driven self-cleaning mechanism that doesn’t require an external power source for operation. With a variety of

screen areas the M100 and MG models support flow rates of up to 3,520 gpm (800 m3/h), with filtration degrees of 500

down to 80 micron and inlet/outlet diameters from 2” to 14”.

The Filtration Process

The filtration process begins when raw water flows through the filter inlet into the coarse screen which pre-filters the

water to protect the cleaning mechanism from large debris. The water then passes through the inner surface of the

fine screen where dirt particles are trapped and accumulate inside the filter, while clean water flows through the filter

outlet. The gradual buildup of dirt on the inner screen surface causes a filter cake to develop which causes an increase

in the pressure differential across the screen.

The Self-Cleaning Process

When the pressure differential across the screen reaches a pre-set level of 7 psi (0.5 bar), the M100 or MG filter starts

the self-cleaning process by opening the internal flush valve. This results in the release of a back-flush stream flowing

through the nozzles out of the hollow suction-scanner shaft to the turbine and to the drainage pipe.

Inlet

Outlet

Coarse Screen

Suction-scanner Shaft

Fine Screen

Turbine

Drainage Pipe

Suction Nozzles

Scan to watch the Filtomat M100 Operation Video

M100 Models

Available as a stand alone or as filter bank assembly, with a single control system (AC/DC).

Amiad’s Filtomat M100 Series consists of the following models:

M100-750 for up to 176 gpm (40 m³/h)

M100-1500 for up to 352 gpm (80 m³/h)

M100-2250 for up to 440 gpm (100 m3/h)

M100-4500 for up to 793 gpm (180 m³/h)

M100-6800 for up to 1,760 gpm (400 m³/h)

MG Models

Modular configuration, available as a stand alone or as filter bank assembly, with a single control system (AC/DC).

The MG modules are delivered fully assembled, requiring a single connection to the inlet, outlet and drain.

Amiad’s Filtomat MG Series consists of the following models:

MG110 (2 x 108LP) for up to 1,760 gpm (400 m3/h)



Inlet

Outlet

Suction Nozzles

Turbine

Suction-scanner Shaft

Drainage Pipe

Screen

M100 - 2250 (M104CL)

M100 - 750 (M102C, M103C)

M100 - 1500 (M103CL, M104C)

M100 Models:

14.0

2.0

PSI

4.0

3.0

5.0

7.0

0.5

0.7

0.3

0.2

0.4

1.4

6 10 20 40 60 200 100

0.2

0.04

0.060.08

0.02

0.1

2 4

BAR

0.80.6

1.0

0.4

20 10 6 50

4000 1000 400 2000

200 100 500 1000

GPMM³/H 1

3” M100-1500

4” M100-1500

14.0

2.0

PSI

4.0

3.0

5.0

7.0

0.5

0.7

0.3

0.2

0.4

1.4

6 10 20 40 60 200 100

0.2

0.04

0.060.08

0.02

0.1

2 4

BAR

0.80.6

1.0

0.4

20 10 6 50

4000 1000 400 2000

200 100 500 1000

GPMM³/H 1

2” M100-750

3” M100-750

Ø 13"(330)

21”

(531

) *27

” (6

84)

28”

(710

) *38

” (9

65)

Ø 13" (330)

Head Loss Graphs (in clean water)Typical Dimensional Drawing

12.4

" (3

15)

32"

(811

) *4

3" (1

090) 3

46

235

192.5

327

432

508

1 1/2" BSP/NPT

OUTLET

INLE

T

FLUSHING

* Approx. height required for maintenance

REV. DATE DESCRIPTION ECO NO. NAME

F

M100-2250 4" (M104CL) DC Control

SHEET 1 OF 1

SUBJECT/PROJECT:

PART NAME/TITLE:

M100-2250 FILTER CAT. NO.:MATERIAL:

DRAWN

APPROVED

NAME DATE

Confidential property information. DRW. NO.: REV.:

SCALE: 1:8

Amiad Water Systems Ltd.reserves the rights to make changes.

All copy rights reserved to Amiad Water Systems Ltd. SIZE: A4

E

D

File Name:M104C New for 2250 SQ_CM DC Control

3 2 14

AVarious

Elad.k

13 24

D

B

E

C

A

F

UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MILLIMETERS

WEIGHT: 49 KG

01/06/2016

0KHG3.H040F.001-GA

17” (432)

Ø 13" (330)14.0

2.0

PSI

4.0

3.0

5.0

7.0

0.5

0.7

0.3

0.2

0.4

1.4

6 10 20 40 60 200 100

0.2

0.04

0.060.08

0.02

0.1

2 4

BAR

0.80.6

1.0

0.4

20 10 6 50

4000 1000 400 2000

200 100 500 1000

GPMM³/H 1

4” M100 - 2250

*Approx. length required for maintenanceDim: inch (mm)

M100 - 4500 (M104LPN, M106LP)

M100 - 6800 (M104XLP, M106XLP, M108LP, M110P)

M100 Models:

50

200 20 10 6 60 40 100

4

0.23.0

0.1

0.02

0.080.06

0.04

1.4

0.4

0.2

0.3

0.7

0.5

2.0

2

0.4

1.0

0.60.8

BAR

7.0

5.04.0

PSI14.0

6 10 20

400 2000 1000

500 100 200 1000 1

GPMM³/H

4” M100-4500

6” M100-4500

50

200 20 GPM 10 6 60 40 100

4

0.23.0

0.1

0.02

0.080.06

0.04

M³/H

1.4

0.4

0.2

0.3

0.7

0.5

2.0

2

0.4

1.0

0.60.8

BAR

7.0

5.04.0

PSI14.0

6 10 20

400 2000 1000

500 100 200 1000 1

4” M100-6800

6” M100-6800

8” M100-6800

10” M100-6800



(900) (467)

82.2”(2088)

*5.9”(150)

8.8”(22.3)

*40.4”(1025)

INLET OUTLET

DRAIN35.4" 18.4”

105.63”(2683)

15.08”(900) (969) (383)

35.43” 38.15”

INLET OUTLET

DRAIN

*42.3”(1575)

*6.3”(160)

MG114

MG110

MG112

MG Models:



0.23.0

0.1

0.02

0.080.06

0.04

1.4

0.4

0.2

0.3

0.7

0.5

2.0

0.4

1.0

0.60.8

BAR

7.0

5.04.0

PSI14.0

GPMM³/H 500

2000 200 100 60 600 400 1000

4020 60 100 200

4000 20000 10000

5000 1000 2000 10000 1

40000

10” MG110

0.23.0

0.1

0.02

0.080.06

0.04

1.4

0.4

0.2

0.3

0.7

0.5

2.0

0.4

1.0

0.60.8

BAR

7.0

5.04.0

PSI14.0

GPMM³/H 500

2000 200 100 60 600 400 1000

4020 60 100 200

4000 20000 10000

5000 1000 2000 10000 1

40000

12” MG112

0.23.0

0.1

0.02

0.080.06

0.04

1.4

0.4

0.2

0.3

0.7

0.5

2.0

0.4

1.0

0.60.8

BAR

7.0

5.04.0

PSI14.0

GPMM³/H

2000 200 100 60 600 400 1000 4000 20000 10000 40000

500 4020 60 100 200 5000 1000 2000 10000 1

14” MG114

(383)15.08”

(1100)43.3”

(769)30.26”

INLET OUTLET

DRAIN

105.7”(2685)

*42.3”(15.75)

*6.3”(160)

105.7”(2685)

(383)15.08”

(1100)43.3”

(769)30.26”

INLET OUTLET

DRAIN

*42.3”(15.75)

*6.3”(160)

105.7”(2685)

(383)15.08”

(1100)43.3”

(769)30.26”

INLET OUTLET

DRAIN

*42.3”(1575)

*6.3”(160)

Filter Type M100-750 M100-1500 M100-2250 M100-4500 M100-6800

General Data

Maximum flow rate*175 gpm(40 m³/h)

350 gpm(80 m³/h)

440 gpm (100 m³/h)

793 gpm (180 m³/h)

1,760 gpm(400 m³/h)

Inlet/Outlet diameter2” (50 mm)3” (80 mm)

3” (80 mm)4” (100 mm)

4” (100 mm)4” (100 mm)6” (150 mm)

4” (100 mm)6” (150 mm)8” (200 mm)10” (250 mm)

Standard filtration degrees

500, 300, 200, 130, 100, 80 micron

Minimum working pressure

30 psi (2 bar)For lower pressure please consult Amiad

Maximum working pressure

116 psi (8 bar) 150 psi (10 bar)

Maximum working temperature

131°F (55°C)

Weight [empty]2” 48.5 lb (22 kg)3” 55 lb (25 kg)

3” 66 lb (30 kg)4” 77 lb (35 kg)

4” 110 lb (50 kg)4” 198 lb (90 kg)6” 253.5 lb (115 kg)

4” 242.5 lb (110 kg)6” 264.5 lb (120 kg)8” 308.6 lb (140 kg)10” 348 lb (158 kg)

* Consult Amiad for optimum flow depending on filtration degree and water quality.

Flushing Data

Minimum flow for flushing(at 30 psi - 2 bar)

66 gpm(15 m³/h)

88 gpm(20 m³/h)

97 gpm(22 m³/h)

114 gpm(26 m³/h)

132 gpm(30 m³/h)

Reject water volume per flush cycle (at 30 psi - 2 bar)

4 gallon(15 liter)

5.2 gallon(20 liter)

7.3 gallon(28 liter)

33 gallon(125 liter)


Flushing cycle time 10 seconds 15 seconds

Exhaust valve 1.5” (40 mm)

Flushing criteria Differential pressure of 7 psi (0.5 bar), time intervals or manual operation

Screen Data

Filter area116 in²

(750 cm²)232 in²

(1,500 cm²)349 in²

(2,250 cm²)698 in²

(4,500 cm²)1,054 in²

(6,800 cm²)

Screen types Molded weavewire stainless steel 316L

* Construction Materials

Filter housing Epoxy-coated carbon steel 37-2 (stainless steel 316L on request)

Filter lid High density polypropylene, Epoxy coated carbon steel 37-2 (Stainless steel 316L on request)

Cleaning mechanism PVC and stainless steel 316L

Exhaust valve Brass, stainless steel 316L, BUNA-N

Seals BUNA-N

Control Brass, stainless steel 316L, and acetal

* Amiad offers a variety of construction materials. Consult us for specifications.

Technical Specifications - M100 Models

Filter Type MG110 MG112 MG114

General Data

Maximum flow rate* 1,760 gpm(400 m³/h)

2,640 gpm(600 m³/h)

3,520 gpm(800 m³/h)

Inlet/Outlet diameter 10” (250 mm) 12” (300 mm) 14” (350 mm)

Standard filtration degrees 500, 300, 200, 130, 100, 80 micron

Minimum working pressure30 psi (2 bar)

For lower pressure please consult Amiad

Maximum working pressure 150 psi (10 bar)

Maximum working temperature 131°F (55°C)

Weight [empty]717 lb

(325 kg)1,054 lb(480 kg)

1,590 lb(723 kg)

* Consult Amiad for optimum flow depending on filtration degree and water quality.

Flushing Data

Minimum flow for flushing(at 30 psi - 2 bar)

132 gpm(30 m³/h)

Reject water volume per flush cycle (at 30 psi - 2 bar)




Flushing cycle time 30 seconds 45 seconds 60 seconds

Exhaust valve 1.5” 40 mm

Flushing criteria Differential pressure of 7 psi (0.5 bar), time intervals or manual operation

Screen Data

Filter area2,108 in²

(13,600 cm²) 3,162 in²

(20,400 cm²)4,216 in²

(27,200 cm²)

Screen types Molded weavewire, stainless steel 316L

* Construction Materials

Filter housing Epoxy-coated carbon steel 37-2 (stainless steel 316L on request)

Filter lid High density polypropylene, Epoxy coated carbon steel 37-2 (Stainless steel 316L on request)

Cleaning mechanism PVC and stainless steel 316L

Exhaust valve Brass, stainless steel 316L, BUNA-N

Seals BUNA-N

Control Brass, stainless steel 316L, and acetal

* Amiad offers a variety of construction materials. Consult us for specifications.

Technical Specifications - MG Models

Amiad Water Systems Ltd. D.N. Galil Elyon 1, 1233500, Israel,Tel: +972 4 690 9500, Fax: +972 4 814 1159,E-mail: [email protected]

Headquarters

The Americas

Asia

Australia

Europe

Amiad USA Inc. Main Office and Manufacturing: 120-J Talbert Road, Mooresville, NC 28117,Tel: +1 704 662 3133, Fax: +1 704 662 3155, Toll Free: +1 800 24 FILTER, E-mail: [email protected] www.amiadusa.com

West Coast Sales Office and Warehouse:1251 Maulhardt Ave, Oxnard, CA 93030Tel: +1 805 988 3323, Fax: +1 805 988 3313, Toll Free: +1 800 969 4055

BrazilAmiad Sistemas de Água Ltda., Rua Funchal, 411, Conj. 42, Vila Olimpia, São Paulo, CEP 04551-060Tel: +55 11 31923824, E-mail: [email protected] Oil & Gas, E-mail: [email protected]

MexicoAmiad México SA DE CV, AV. Jesus del Monte #39B – INT 601, Col. Jesus del Monte, C.P. 52764, Huixquilucan, Estado de México, Tel/Fax: +52 55 636 28122, Mob: +52 1 55 4909 2202E-mail: [email protected] Office: [email protected]

IndiaAmiad Filtration India Pvt Limited, 305 Sai Commercial Building, Govandi St Rd, Govandi Mumbai 400 088, Tel: +91 22-67997813/14, Fax: +91 22-67997814, Email: [email protected] China (Yixing Taixing Environtec Co., Ltd.) 70 Baihe Chang, Xingjie Yixing Jiangsu, 214204,Tel: +86 510 87134000, Fax: +86 510 87134999, E-mail: [email protected] AsiaFiltration & Control Systems Pte. Ltd., 22 Sin Ming Lane #07-71 Midview City, Singapore 573969, Tel: +65 6 337 6698, Fax: +65 6 337 8180, E-mail: [email protected]

Amiad Australia Pty Ltd. 138 Northcorp Boulevard, Broadmeadows, Victoria 3047,Tel: +61 3 93585800, Fax: +61 3 93585888, E-mail: [email protected]

Amiad Water Systems Europe SAS, Ilot No4 ZI La Boitardière, 37530 Chargé, France,Tel: +33 (0) 2 47 23 01 10, Fax: +33 (0) 2 47 23 80 67, E-mail: [email protected] Water Systems Europe SAS (Irrigation Division) 100 avenue de l’Anguillon, Z.I. des Iscles, 13160 Chateaurenard, Tel: +33 (0) 4 32 60 10 01, Fax +33 (0) 4 32 60 60 85

GermanyAmiad Water Systems SAS Europe (German branch office) Zweigniederlassung Deutschland Prinz-Regent-Str. 68 a 44795 Bochum,Tel: +49 (0) 234 588082-0, Fax: +49 (0) 234 588082-10, E-mail: [email protected]

United KingdomAmiad Water Systems UK Limited, Unit 1 Heol Rhosyn, Dafen Business Park, Dafen, Llanelli SA14 8QG,Tel: +44 (0)1792 277290, Fax: +44 (0)1792 797707, E-mail: [email protected]

910101-000477/04.2017www.amiad.comCopyright © 2013 Amiad Water Systems Ltd. All rights reserved. The contents of this catalogue including without limitation all information and materials, images, illustrations, designs, icons, photographs, graphical presentations, designs, literary works, data, drawings, slogans, phrases, names, trademarks, titles and any other such materials that appear in this catalogue (collectively, the “Contents”) are the sole property of Amiad Water Systems Ltd. (“Amiad”). Amiad has sole and exclusive right, title and interest in the Contents, including any intellectual property rights, whether registered or not, and all know-how contained or embodied therein. You may not reproduce, publish, transmit, distribute, display, modify, create derivative works from, sell or participate in any sale of, or exploit in any way, in whole or in part, any of the Contents or the catalogue. Any use of the catalogue or the Contents, other than for personal use, requires the advanced written permission of Amiad.

filtomat m100/mg filters - water filtration systems -...

Documents