figure 1 - egps

6
Open SurvCE Select the Equip tab, then choose GPS Rover o (Figure 1) GPS Rover menu o Here is where you will select the RTK tab. (Figure 2) RTK tab o Next to NTRIP you will see a hammer & wrench crossed over each other. (Figure 3) o Select the hammer & wrench icon-> this will send you to the NITRIP Broadcasters o NTRIP Broadcasters (Figure 4) If you do not have ga.eGPS.net as the name, please select New and label ga.eGPS.net IP address should be set to 107.7.166.152 Port should be set to 8080 User & Password (Case sensitive) Note: Carlson SurvCE may ask you to delete old mount points. Select Yes. o Bases for eGPS Select the Name pull down tab Use GPS_VRS for CMR+ corrections Use GLONASS_RTCM_30 for RTCM corrections o (Figure 5) eGPS Solutions | 770-695-3361 | www.eGPS.net

Upload: others

Post on 03-Nov-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Figure 1 - eGPS

• Open SurvCE

• Select the Equip tab, then choose GPS Rover

o (Figure 1)

• GPS Rover menu

o Here is where you will select the RTK tab. (Figure 2)

• RTK tab

o Next to NTRIP you will see a hammer & wrench crossed over each other.

▪ (Figure 3)

o Select the hammer & wrench icon-> this will send you to the NITRIP Broadcasters

o NTRIP Broadcasters (Figure 4)

▪ If you do not have ga.eGPS.net as the name, please select New and label

ga.eGPS.net

▪ IP address should be set to 107.7.166.152

▪ Port should be set to 8080

▪ User & Password (Case sensitive)

▪ Note: Carlson SurvCE may ask you to delete old mount points. Select Yes.

o Bases for eGPS

▪ Select the Name pull down tab

• Use GPS_VRS for CMR+ corrections

• Use GLONASS_RTCM_30 for RTCM corrections

o (Figure 5)

eGPS Solutions | 770-695-3361 | www.eGPS.net

Page 2: Figure 1 - eGPS

Figure 1

• Select the Equip tab, then choose GPS Rover

eGPS Solutions | 770-695-3361 | www.eGPS.net

Page 3: Figure 1 - eGPS

Figure 2• Here is where you will select

the RTK tab.

eGPS Solutions | 770-695-3361 | www.eGPS.net

Page 4: Figure 1 - eGPS

Figure 3• Next to NTRIP you will see a

hammer & wrench crossed over each other.

eGPS Solutions | 770-695-3361 | www.eGPS.net

Page 5: Figure 1 - eGPS

Figure 4• If you do not have ga.eGPS.net

as the name, please select New and label ga.eGPS.net

• IP address should be set to 107.7.166.152

• Port should be set to 8080• User & Password (Case

sensitive)

eGPS Solutions | 770-695-3361 | www.eGPS.net

Page 6: Figure 1 - eGPS

Figure 5• Select the Name pull down tab, • use GPS_VRS for CMR+

corrections • use GLONASS_RTCM_30 for

RTCM corrections

eGPS Solutions | 770-695-3361 | www.eGPS.net