fiesta mk6

8/10/2019 Fiesta Mk6

http://slidepdf.com/reader/full/fiesta-mk6 1/226



IntroductionAbout This Manual...........................................7Symbols Glossary.............................................7Replacement PartsRecommendation.........................................7

At a GlanceAt a Glance........................................................10

Child Safety Child Seats.........................................................18Child Seat Positioning...................................19

Booster Seats..................................................22ISOFIX Anchor Points...................................23Child Safety Locks.........................................24

Occupant protectionPrinciple of Operation...................................25Fastening the seat belts...............................27Seat belt height adjustment......................27Seat belt reminder.........................................28Using seat belts during pregnancy..........28Disabling the passenger airbag................28

Keys and Remote ControlsGeneral Information on Radio

Frequencies.................................................30Programming the remote control............30Changing the remote control

battery............................................................30

LocksLocking and Unlocking.................................34Keyless Entry....................................................36

Engine immobiliserPrinciple of Operation..................................39Coded keys.......................................................39Arming the engine immobiliser................39Disarming the engine immobiliser...........39

AlarmPrinciple of Operation..................................40Arming the alarm...........................................40Disarming the alarm.....................................40

Steering WheelAdjusting the Steering Wheel.....................41Audio Control....................................................41Voice Control...................................................42

Wipers and WashersWindscreen Wipers.......................................43

Autowipers.......................................................43Windscreen Washers....................................44Rear Window Wiper and Washers...........44Checking the Wiper Blades........................45Changing the Wiper Blades.......................45

LightingLighting Control...............................................47Autolamps........................................................48

Front Fog Lamps............................................48Rear Fog Lamps.............................................48Headlamp Levelling......................................48Hazard Warning Flashers............................49Direction Indicators.......................................49Interior Lamps.................................................49Removing a Headlamp................................50Changing a Bulb..............................................51Bulb Specification Chart.............................55

Windows and MirrorsPower Windows.............................................56Exterior Mirrors.................................................57Electric exterior mirrors................................57Auto-Dimming Mirror...................................58

Instrument ClusterGauges...............................................................59

1

Table of Contents



Warning Lamps and Indicators................59Audible Warnings and Indicators.............62

Information DisplaysGeneral Information.....................................64Trip Computer.................................................69Personalised Settings..................................69Information Messages..................................70

Climate ControlPrinciple of Operation...................................75Air Vents.............................................................75

Manual Climate Control..............................76Automatic Climate Control........................78Heated Windows and Mirrors....................79

SeatsSitting in the Correct Position....................81Head Restraints...............................................81Manual Seats...................................................82Rear Seats........................................................84Heated Seats...................................................85

Convenience featuresSun Visors.........................................................86Clock...................................................................86Cup Holders.....................................................86Cigar Lighter.....................................................86Storage compartments...............................86Map Pockets....................................................87Toll Reader........................................................87Auxiliary Input Socket...................................87USB Port...........................................................88Satellite Navigation Unit Holder..............88Floor Mats.........................................................88

Starting and Stopping theEngine

General Information.....................................89

Ignition Switch................................................89Keyless Starting..............................................89Steering Wheel Lock....................................90

Starting a Petrol Engine................................91Starting a Diesel Engine..............................92Diesel Particulate Filter................................92Switching Off the Engine............................93

Start-StopPrinciple of Operation..................................94Using start-stop.............................................94

Eco ModePrinciple of Operation..................................96Using Eco mode.............................................96

Fuel and RefuellingSafety Precautions........................................97Fuel Quality - Petrol......................................97Fuel Quality - Diesel......................................97Fuel filler flap...................................................97Catalytic Converter.......................................99Refuelling..........................................................99Fuel Consumption.........................................99Technical Specifications...........................100

TransmissionManual Transmission..................................101Automatic Transmission............................101

BrakesPrinciple of Operation................................104Hints on Driving With Anti-Lock

Brakes...........................................................104Parking Brake.................................................104

Stability ControlPrinciple of Operation................................105Using Stability Control...............................105

2

Table of Contents



Parking AidsPrinciple of Operation................................106Parking Aid - Vehicles With: Rear Parking

Aid..................................................................106Parking Aid - Vehicles With: Front andRear Parking Aid........................................107

Rear view cameraPrinciple of Operation................................108Rear View Camera.......................................108

Cruise ControlPrinciple of Operation.................................110Using Cruise Control....................................110

Load CarryingGeneral Information.....................................112Luggage Covers..............................................112Roof Racks and Load Carriers...................112

TowingTowing a Trailer...............................................113Tow Ball.............................................................113

Driving HintsRunning-In........................................................117Cold Weather Precautions..........................117Driving Through Water.................................117

Roadside EmergenciesFirst Aid Kit.......................................................118

Warning Triangle............................................118

FusesFuse Box Locations.......................................119Changing a Fuse............................................119Fuse Specification Chart...........................120

Vehicle recovery Towing Points.................................................129

Towing the Vehicle on Four Wheels......129

Maintenance

General Information.....................................131Opening and Closing the Bonnet............132Under Bonnet Overview - 1.25L

Duratec-16V (Sigma)/1.4LDuratec-16V (Sigma)/1.6LDuratec-16V Ti-VCT (Sigma)..............133

Under Bonnet Overview - 1.4LDuratorq-TDCi (DV) Diesel..................134

Under Bonnet Overview - 1.6LDuratorq-TDCi (DV) Diesel...................135

Engine Oil Dipstick - 1.25L Duratec-16V(Sigma)/1.4L Duratec-16V(Sigma)/1.6L Duratec-16V Ti-VCT(Sigma)........................................................136

Engine Oil Dipstick - 1.4L Duratorq-TDCi(DV) Diesel/1.6L Duratorq-TDCi (DV)Diesel............................................................136

Engine Oil Check...........................................137Engine Coolant Check.................................137Washer Fluid Check.....................................138Brake and Clutch Fluid Check..................138

Technical Specifications............................139

Vehicle CareCleaning the Exterior....................................141Cleaning the Interior....................................142Repairing Minor Paint Damage...............142

Vehicle battery Jump-Starting the Vehicle........................143

Battery connection points........................144

Wheels and TyresGeneral Information....................................145Changing a Road Wheel............................145Tyre Repair Kit...............................................150Tyre Care..........................................................153Using Winter Tyres.......................................154Using Snow Chains......................................154

3

Table of Contents




Vehicle identification

Vehicle Identification Plate.......................158Vehicle Identification Number.................158

Capacities and Specific-ations


Audio introductionImportant audio information...................162

Audio unit overviewAudio unit overview.....................................163

Audio System Security Security code.................................................169

Audio unit operationOn/off control................................................170Sound button.................................................170Waveband button........................................170Station tuning control.................................170Station preset buttons.................................171Autostore control...........................................171Traffic information control.........................171

Audio unit menusAutomatic volume control.........................173Digital signal processing (DSP)...............173News broadcasts..........................................173Alternative frequencies...............................173Regional mode (REG).................................174

Compact Disc PlayerCompact disc playback..............................175Track selection...............................................175Fast forward/reverse...................................175

Shuffle/random.............................................175Repeat compact disc tracks.....................175Compact disc track scanning...................176

MP3 file playback.........................................176MP3 display options....................................178Ending compact disc playback...............178

Auxiliary input (AUX IN)socket

Auxiliary input (AUX IN) socket...............179

Audio Troubleshooting

Audio troubleshooting...............................180TelephoneGeneral Information.....................................181Bluetooth setup.............................................181Telephone setup............................................181Telephone controls......................................182Using the telephone....................................182

Voice controlPrinciple of Operation.................................185Using voice control......................................185Audio unit commands................................186Telephone commands...............................193Climate control commands.....................198

Connectivity General Information....................................201Connecting an external device...............202Connecting an external device - Vehicles

With: Bluetooth........................................202Using a USB device.....................................203Using an iPod................................................204

Navigation introductionRoad Safety...................................................206

4

Table of Contents



Navigation systemGetting started.............................................207

AppendicesType approvals.............................................209Type approvals.............................................209Type approvals.............................................209Electromagnetic compatibility................210

5

Table of Contents



6



ABOUT THIS MANUAL

Thank you for choosing Ford. Werecommend that you take some time toget to know your vehicle by reading thismanual. The more that you know about it,the greater the safety and pleasure youwill get from driving it.

WARNINGAlways drive with due care andattention when using and operatingthe controls and features on your

vehicle.

Note: This manual describes productfeatures and options available throughoutthe range, sometimes even before they are generally available. It may describe options not fitted to your vehicle.

Note: Some of the illustrations in this manual may be used for different models, so may appear different to your vehicle.However, the essential information in theillustrations is always correct.

Note: Always use and operate your vehiclein line with all applicable laws and regulations.

Note: Pass on this manual when selling your vehicle. It is an integral part of thevehicle.

This vehicle has received the endorsementof TÜV, the accredited international testingorganisation, for its allergy-friendlyproperties.All materials used in the manufacture ofthe interior of this vehicle meet strictrequirements of the TÜV TOXPROOFCriteria Catalogue for Vehicle Interiors byTÜV Produkt and Umwelt GmbH and aredesigned to minimize the risk of allergicreactions.

Additionally an efficient pollen filterprotects the passengers against allergenparticles in the outdoor air.

For more information, contact TÜV atwww.tuv.com.

SYMBOLS GLOSSARY

Symbols in this handbook

WARNINGYou risk death or serious injury toyourself and others if you do notfollow the instructions highlighted

by the warning symbol.

CAUTIONYou risk damaging your vehicle if youdo not follow the instructionshighlighted by the caution symbol.

Symbols on your vehicle

When you see these symbols, read andfollow the relevant instructions in thishandbook before touching or attemptingadjustment of any kind.

REPLACEMENT PARTSRECOMMENDATION

Now you can be sure that your Fordparts are Ford partsYour Ford has been built to the higheststandards using high quality Ford OriginalParts. As a result, you can enjoy driving itfor many years.

7

Introduction



Should the unexpected occur and a majorpart needs replacing, we recommend thatyou accept nothing less than Ford OriginalParts.The use of Ford Original Parts ensures thatyour vehicle is repaired to its pre-accidentcondition and maintains its maximumresidual value.Ford Original Parts match Ford's stringentsafety requirements and high standardsof fit, finish and reliability. Quite simply,they represent the best overall repair value,including parts and labour costs.Now it is easier to tell if you have reallybeen given Ford Original Parts. The Fordlogo is clearly visible on the following partsif they are Ford Original Parts. If yourvehicle has to be repaired, look for theclearly visible Ford branding and make surethat only Ford Original Parts have beenused.

Look for the Ford logo on thefollowing parts

Sheet metal• Bonnet• Wing• Doors• Luggage compartment lid

Bumper and radiator grille• Radiator grille• Front and rear bumper

8

Introduction



Exterior mirror

Glass• Rear window• Side glass• Windscreen

Lighting• Rear lamps• Headlamp

9

Introduction



Right-hand drive

Air vents. See Air Vents (page 75).ADirection indicators. See Direction Indicators (page 49). Main beam. SeeLighting Control (page 47). See Voice Control (page 42). See Trip

Computer (page 69).

B

Instrument cluster. See Gauges (page 59). See Warning Lamps andIndicators (page 59).

C

Start button. See Keyless Starting (page 89).DWiper lever. See Wipers and Washers (page 43).EMulti functional display.FAudio unit. See Audio unit overview (page 163).G

11

At a Glance



Door lock button. See Locking and Unlocking (page 34).HHazard warning flasher switch. See Hazard Warning Flashers (page 49).I

Climate controls. See Climate Control (page 75).J Card holder or parking aid warning lamp or switch. See Parking Aids (page106).

K

Card holder or passenger airbag deactivation warning lamp. See Disablingthe passenger airbag (page 28).

L

Start-Stop switch. See Using start-stop (page 94).MIgnition switch.NCruise control. See Using Cruise Control (page 110).OHorn.PSteering wheel adjustment. See Adjusting the Steering Wheel (page 41).QDriver knee airbag. See Principle of Operation (page 25).RAudio control. See Audio Control (page 41).SBonnet release lever. See Opening and Closing the Bonnet (page 132).TLighting control. See Lighting Control (page 47). Front fog lamps. See FrontFog Lamps (page 48). Rear fog lamp. See Rear Fog Lamps (page 48).

U

Locking and unlocking

Unlocking the vehicle

UnlockALockBLuggage compartment lid unlockC

Press the unlock button once to unlock the

vehicle. See Programming the remotecontrol (page 30).Press the lock button once to activatecentral locking.Press the lock button twice within threeseconds to activate double locking.Press the luggage compartment lid unlockbutton twice within three seconds tounlock the luggage compartment.

See Locking and Unlocking (page 34).

12

At a Glance



Keyless entry

Passive locking and unlocking requires avalid passive key to be located within oneof the three external detection ranges.

Locking the vehicle

Locking buttons are located on each of thefront doors.Press a locking button once.

Unlocking the vehicle

Press a locking button once.

See Keyless Entry (page 36).

Keyless starting

Press the start button once.

Starting with automatic transmission

Note: Releasing the brake pedal duringengine start will stop the engine cranking and return to ignition on.

1. Make sure the transmission selectorlever is in position P or N .

2. Fully depress the brake pedal.3. Briefly press the start button.

Starting with manual transmission

Note: Releasing the clutch pedal duringengine start will stop the engine cranking and return to ignition on.

1. Fully depress the clutch pedal.2. Briefly press the start button.

See Keyless Starting (page 89).

Adjusting the steering wheel

WARNINGNever adjust the steering wheelwhen the vehicle is moving.

13

At a Glance



WARNINGMake sure that you fully engage thelocking lever when returning it to itsoriginal position.

See Adjusting the Steering Wheel(page 41).

Manual climate control

Recommended settings for cooling

Open the centre and side air vents.Direct the centre air vents upwards and theside air vents toward the side windows.

Recommended settings for heating

Close the centre air vents and open theside air vents.Direct the side air vents toward the sidewindows.

See Manual Climate Control (page 76).

14

At a Glance



Automatic climate control

Recommended settings for cooling

Set the temperature to 22°C (72°F).Open the centre and side air vents.Direct the centre air vents upwards and theside air vents toward the side windows.

Recommended settings for heating

Set the temperature to 22°C (72°F).Open the centre and side air vents.Direct the centre air vents upwards and the

side air vents toward the side windows.See Automatic Climate Control (page78).

Autolamps

The headlamps will come on and go offautomatically depending on the ambientlight.

See Lighting Control (page 47).

Direction indicators

If the lever is tapped up or down, thedirection indicators will flash three times.

See Direction Indicators (page 49).

Autowipers

Move the lever up one position.

15

At a Glance



The rain sensor will continuously measurethe amount of water on the windscreenand adjust the speed of the front wipersautomatically.Adjust the sensitivity of the rain sensorusing the rotary control.

See Windscreen Wipers (page 43).

Airbag

WARNINGTo avoid the risk of death or seriousinjury, never use a rearward facingchild restraint in the front, unless the

air bag is off.

See Child Safety (page 18).See Disabling the passenger airbag(page 28).

Manual seatsNote: Do not hold on to the locking lever when moving the seat.

To move the seat, follow the sequenceshown.

Folding the seatback forwards - 3-door

Returning the seatback to the seatingposition - 3-door

See Manual Seats (page 82).

16

At a Glance



Fuel filler flap

Press the flap to open it. Open the flap fullyuntil it engages.

Insert the fuel nozzle up to and includingthe first notch on the nozzle. Keep it restingon the cover of the fuel pipe opening.

WARNINGWe recommend that you remove thefuel nozzle slowly to allow anyresidual fuel to drain into the fuel

tank. Alternatively you can wait 10 secondsbefore removing the fuel nozzle.

Slightly raise the fuel nozzle to remove it.

See Fuel filler flap (page 97).

17

At a Glance



CHILD SEATS

WARNINGSSecure children that are less than150 centimetres (59 inches) tall in asuitable, approved child restraint, in

the rear seat.Extreme Hazard! Do not use arearward facing child restraint on aseat protected by an air bag in front

of it!

Read and follow the manufacturer ’sinstructions when you are fitting achild restraint.Do not modify child restraints in anyway.

Do not hold a child on your lap whenthe vehicle is moving.

WARNINGSDo not leave unattended children inyour vehicle.

If your vehicle has been involved inan accident, have the child restraintschecked by properly trained

technicians.

Note: Mandatory use of child restraintsvaries from country to country.

Only child restraints certified toECE-R44.03 (or later) have been testedand approved for use in your vehicle. A

choice of these are available from yourDealer.

Child restraints for different massgroupsUse the correct child restraint as follows:

Baby safety seat

Secure children that weigh less than 13kilograms (29 pounds) in a rearward facingbaby safety seat (Group 0+) in the rearseat.

18

Child Safety



Child safety seat

Secure children that weigh between 13 and18 kilograms (29 and 40 pounds) in a childsafety seat (Group 1) in the rear seat.

CHILD SEAT POSITIONING

WARNINGSPlease consult your Dealer for thelatest details relating to Fordrecommended child seats.

WARNINGSOriginal text according to ECER94.01: Extreme Hazard! Do not use

a rearward facing child restraint ona seat protected by an air bag in front ofit!

When using a child seat with asupport leg, the support leg mustrest securely on the floor.When using a child seat with a seatbelt, make sure that the seat belt isnot slack or twisted.

CAUTIONThe child seat must rest tightlyagainst the vehicle seat. It may benecessary to lift or remove the head

restraint. See Head Restraints (page 81).

Note: When using a child seat on a front seat, always adjust the front passenger seatto its fully rearwards position. If it provesdifficult to tighten the lap section of the seat belt without slack remaining, adjust the seatback to the fully upright position and raise the height of the seat. See Seats(page 81).

19

Child Safety



Mass group categories

Seating positions 3210+0

22 - 36 kg15 - 25 kg9 - 18 kgUp to 13 kgUp to 10 kg

UF¹UF¹UF¹XXFront passenger seatwith airbag ON

U¹U¹U¹U¹U¹Front passenger seatwith airbag OFF

UUUUURear seats

X Not suitable for children in this mass group.

U Suitable for universal category child seats approved for use in this mass group.U¹ Suitable for universal category child seats approved for use in this mass group. However,we recommend that you secure children in a government approved child seat, in the rearseat.UF¹ Suitable for universal category forward facing child seats approved for use in thismass group. However, we recommend that you secure children in a government approvedchild seat, in the rear seat.

ISOFIX child seats


Seating positions10+

Forward facingRear facing

9 - 18 kgUp to 13 kg

Not ISOFIX equippedSize classFront seat

Seat type

B, B1*

E*Size classRear outboard seat ISOFIX

IL, IUF***IL**Seat type

20

Child Safety




Seating positions10+

Forward facingRear facing

9 - 18 kgUp to 13 kg

Not ISOFIX equippedSize classRear centre seat

Seat type

IL Suitable for particular ISOFIX child restraints systems of the semi-universal category.Please consult child restraints systems suppliers' vehicle recommendation lists.IUF Suitable for ISOFIX forward facing child restraints systems of universal categoryapproved for use in this mass group and ISOFIX size class.*The ISOFIX size class for both universal and semi-universal child restraints systemsis defined by the capital letters A to G. These identification letters are displayed on ISOFIXchild restraints.**At time of publishing the recommended Group O+ ISOFIX baby safety seat is the BritaxRomer Baby Safe. Please consult your Dealer for the latest details relating to Fordrecommended child seats.***At time of publishing the recommended Group 1 ISOFIX child seat is the Britax RomerDuo. Please consult your Dealer for the latest details relating to Ford recommended childseats.

21

Child Safety



BOOSTER SEATS

WARNINGS

Do not install a booster seat or abooster cushion with only the lapstrap of the seat belt.Do not install a booster seat or abooster cushion with a seat belt thatis slack or twisted.Do not put the seat belt under yourchild ’s arm or behind its back.

Do not use pillows, books or towelsto boost your child ’s height.

Make sure that your children sit in anupright position.

Secure children that weigh morethan 15 kilograms (33 pounds) butare less than 150 centimetres (59

inches) tall in a booster seat or a boostercushion.

CAUTION

When using a child seat on a rear seat,make sure that the child seat reststightly against the vehicle seat. It may

be necessary to lift or remove the headrestraint. See Head Restraints (page 81).

Booster seat (Group 2)

We recommend that you use a boosterseat that combines a cushion with abackrest instead of a booster cushion only.The raised seating position will allow youto position the shoulder strap of the adultseat belt over the centre of your child ’sshoulder and the lap strap tightly acrossits hips.

Booster cushion (Group 3)

22

Child Safety



ISOFIX ANCHOR POINTS

WARNING

Use an anti-rotation device whenusing the ISOFIX system. Werecommend the use of a top tether

or support leg.

Your vehicle is fitted with ISOFIX anchorpoints that accommodate universallyapproved ISOFIX child seats.The ISOFIX system comprises of two rigidattachment arms on the child seat that

attach to anchor points on the outboardrear seats, where the cushion and backrestmeet. Tether anchor points are fittedbehind the outboard rear seats for childseats with a top tether.

Top tether anchor points

Attaching a child seat with toptethers

WARNINGDo not attach a tether strap toanything other than the correcttether anchor point.

Note: Where applicable, remove theluggage cover to ease installation. See Luggage Covers (page 112).

1. Place the child seat on the back seatcushion and fold the relevant seatbackforwards. See Rear Seats (page 84).

2. Remove the head restraint. See HeadRestraints (page 81).

WARNING

Make sure the top tether strap is notslack or twisted and is properlylocated on the anchor point.

3. Route the tether strap to the anchorpoint.

WARNINGMake sure that the seatback issecure and fully engaged in thecatch.

4. Push the seatback to the uprightposition.

23

Child Safety



5. Push the child seat back firmly toengage the ISOFIX lower anchor points.

6. Tighten the tether strap in line with thechild seat manufacturer's instructions.

CHILD SAFETY LOCKS

WARNINGYou cannot open the doors frominside if you have put the child safetylocks on.

Left-hand sideTurn anti-clockwise to lock and clockwiseto unlock.

Right-hand sideTurn clockwise to lock and anti-clockwiseto unlock.

24

Child Safety



PRINCIPLE OF OPERATION

Airbags

WARNINGSDo not modify the front of yourvehicle in any way. This couldadversely affect deployment of the

airbags.Original text according to ECER94.01: Extreme Hazard! Do not usea rearward facing child restraint on

a seat protected by an airbag in front of it!Wear a seat belt and keep sufficientdistance between yourself and thesteering wheel. Only when you use

the seat belt properly, can it hold you in aposition that allows the airbag to achieveits optimum effect. See Sitting in theCorrect Position (page 81).

Have repairs to the steering wheel,steering column, seats, airbags andseat belts carried out by a properly

trained technician.

Keep the areas in front of the airbagsfree from obstruction. Do not affixanything to or over the airbag covers.Do not poke sharp objects into areaswhere airbags are fitted. This coulddamage and adversely affect

deployment of the airbags.Use seat covers designed for seatswith side airbags. Have these fittedby a properly trained technician.

Note: You will hear a loud bang and see acloud of harmless powdery residue if an airbag deploys. This is normal.

Note: Only wipe airbag covers with a dampcloth.

Driver and front passenger airbags

The driver and front passenger airbags willdeploy during significant frontal collisionsor collisions that are up to 30 degrees fromthe left or the right. The airbags will inflatewithin a few thousandths of a second anddeflate on contact with the occupants,thus cushioning forward body movement.During minor frontal collisions, overturns,rear collisions and side collisions, the driverand front passenger airbags will notdeploy.

Driver knee airbag

CAUTIONDo not attempt to open the driverknee airbag cover.

The driver knee airbag will deploy duringfrontal collisions or collisions that are upto 30 degrees from the left or the right. The

airbag will inflate within a few thousandthsof a second and deflate on contact withthe occupants, thus providing a cushionbetween the driver ’s knees and the steeringcolumn. During overturns, rear collisionsand side collisions, the knee airbag will notdeploy.For item location: See At a Glance (page10).

25

Occupant protection



The driver and front passenger seat beltretractors are fitted with a seat beltpretensioner. Seat belt pretensioners havea lower deployment threshold than theairbags. During minor collisions, it ispossible that only the seat beltpretensioners will deploy.

Status after a collision

WARNINGSeat belts subjected to strain, as aresult of an accident, should berenewed and the anchorages

checked by a properly trained technician.

FASTENING THE SEAT BELTS

WARNINGInsert the tongue into the buckle untilyou hear a distinct click. You havenot fastened the seat belt properly

if you do not hear a click.

Pull the belt out steadily. It may lock if youpull it sharply or if the vehicle is on a slope.Press the red button on the buckle torelease the belt. Let it retract completelyand smoothly.

SEAT BELT HEIGHTADJUSTMENT

Note: Lifting the slider slightly while pressing the locking button makes it easier to release the locking mechanism.

To raise or lower, press the locking buttonon the adjuster and move as necessary.

27

Occupant protection



SEAT BELT REMINDER

WARNING

The occupant protection system willonly provide optimum protectionwhen you use the seat belt properly.

Note: The front passenger sport seat is notfitted with a seat belt reminder.

The seat belt reminder warninglamp illuminates and an audiblewarning will sound if the driver's

or front seat passenger's seat belt has not

been fastened and the vehicle exceeds arelatively low speed. It will also illuminateif the driver's or front seat passenger's seatbelt is unfastened when the vehicle ismoving. The audible warning will go offafter five minutes but the seat beltreminder warning lamp will remain on untilthe driver's or front seat passenger's seatbelt is fastened.

Deactivating the seat belt

reminderSee your dealer.

USING SEAT BELTS DURINGPREGNANCY

WARNINGPosition the seat belt correctly foryour safety and that of your unborn

child. Do not use only the lap strapor the shoulder strap.

Position the lap strap comfortably acrossyour hips and low beneath your pregnantabdomen. Position the shoulder strapbetween your breasts, above and to theside of your pregnant abdomen.

DISABLING THE PASSENGER

AIRBAGWARNING

Make sure that the passenger airbagis disabled when using a rearwardfacing child restraint on the front

passenger seat.

Fitting the passenger airbagdeactivation switch

WARNINGIf you need to fit a child restraint ona seat protected by an operationalairbag in front of it, have a passenger

airbag deactivation switch fitted. Ask yourdealer for further information.

28

Occupant protection



Note: The key switch is located in the glovecompartment with an airbag deactivationlamp in the instrument panel.

If the airbag warning lamp illuminates orflashes when you are driving, this indicatesa malfunction. See Warning Lamps andIndicators (page 59). Remove the childrestraint and have the system checkedimmediately.

Disabling the passenger airbag

DisabledAEnabledB

Turn the switch to position A .

When you switch the ignition on, check thatthe passenger airbag deactivation warninglamp illuminates.

Enabling the passenger airbag

WARNINGMake sure that the passenger airbagis enabled when you are not using achild restraint on the front passenger

seat.

Turn the switch to position B .

29

Occupant protection



GENERAL INFORMATION ONRADIO FREQUENCIES

CAUTIONSThe radio frequency used by yourremote control can also be used byother short distance radio

transmissions (e.g. amateur radios,medical equipment, wireless headphones,remote controls and alarm systems). If thefrequencies are jammed, you will not beable to use your remote control. You canlock and unlock the doors with the key.

Check your vehicle is locked beforeleaving it unattended. This willsafeguard against any potential

malicious frequency blocking.

Note: You could unlock the doors if you press the buttons on the remote controlunintentionally.

The operating range between your remotecontrol and your vehicle varies dependingon the environment.

PROGRAMMING THE REMOTECONTROL

A maximum of eight remote controls(including any supplied with your vehicle)can be programmed. The remote controlsmust remain inside the vehicle during theprogramming procedure. Fasten the frontseat belts and close all doors to ensure

that conflicting chimes do not sound duringprogramming.

Programming a new remotecontrol1. To programme new remote controls

turn the ignition key to position II fourtimes within six seconds.

2. Turn the ignition to position 0 . A tonesounds to indicate that it is nowpossible to programme the remotecontrols for ten seconds.

3. Press any button on a new remotecontrol. A tone will sound asconfirmation.

4. Repeat this last step for all your remotecontrols, including your original. Do notremove the key from the ignition whenpressing the button on this remotecontrol.

5. Switch the ignition back on (positionII) or wait for ten seconds withoutprogramming another remote controlto end the key programming. Only theremote controls which you have justprogrammed are now able to lock andunlock the vehicle.

Reprogramming the unlockingfunction

Note: When you press the unlock buttoneither all the doors are unlocked or only thedriver ’ s door and the luggage compartmentlid are unlocked. Pressing the unlock button again unlocks all the doors.

Press and hold the unlock and lock buttonson the remote key simultaneously for atleast four seconds with the ignition off. Thedirection indicators will flash twice toconfirm the change.To return to the original unlocking function,repeat the process.

CHANGING THE REMOTECONTROL BATTERY

Make sure that you dispose ofold batteries in anenvironmentally friendly way.

Seek advice from your local authorityregarding recycling.

30

Keys and Remote Controls



Remote control with a folding key blade

1. Insert a screwdriver as far as possibleinto the slot on the side of the remotecontrol, push it towards the key bladeand remove the key blade.

2. Twist the screwdriver in the positionshown to start separating the two

halves of the remote control.

3. Twist the screwdriver in the positionshown to separate the two halves ofthe remote control.

CAUTIONDo not touch the battery contacts orthe printed circuit board with thescrewdriver.

4. Carefully prise out the battery with thescrewdriver.

5. Install a new battery (3V CR 2032) withthe + facing downwards.

6. Assemble the two halves of the remotecontrol.

7. Install the key blade.

31




Remote control without a foldingkey blade

Type 1

1. Insert a screwdriver into the recess onthe back of the key and remove the keyblade.

2. Release the retaining clips with thescrewdriver and separate the twohalves of the remote control.

CAUTIONDo not touch the battery contacts or

the printed circuit board with thescrewdriver.


4. Install a new battery (3V CR 2032) withthe + facing upwards.

5. Assemble the two halves of the remotecontrol.


Type 2

1. Press and hold the pushbuttons on theedges to release the cover. Carefullyremove the cover.

2. Remove the key blade.

32




3. Twist a flat bladed screwdriver in theposition shown to separate the two

halves of the remote control.

4. Carefully insert the screwdriver in theposition shown to open the remotecontrol.

CAUTIONDo not touch the battery contacts orthe printed circuit board with thescrewdriver.


6. Install a new battery (3V CR 2032) with

the + facing downwards.7. Assemble the two halves of the remotecontrol.


33




LOCKING AND UNLOCKING

Note: Do not leave your keys in the vehicle.

LockingLocking with the key

Turn the top of the key towards the frontof the vehicle.

Locking with the remote control

Note: The driver ’ s door can be locked withthe key. This needs to be used if the remotecontrol is not functioning.

Press the button.

Double locking

WARNINGDo not activate double locking whenpersons or animals are inside thevehicle. You will not be able to

unlock the doors from the inside if you havedouble locked them.

Double locking is a theft protection featurethat prevents someone from opening thedoors from the inside. You can only doublelock the doors if they are all closed.

Double locking with the key

Turn the key to the lock position twicewithin three seconds.

Double locking with the remote control

Press the button twice withinthree seconds.

Unlocking

Unlocking with the key

Turn the top of the key towards the rear ofthe vehicle.

Unlocking with the remote control

Note: The driver ’ s door can be unlocked with the key. This needs to be used if the remote control is not functioning.

Note: If the vehicle remains locked for several weeks, the remote control will bedisabled. The vehicle must be unlocked and the engine started using the key. Unlocking and starting the vehicle once will enable the remote control.

Press the button.

Automatic relocking

The doors will relock automatically if youdo not open a door within 45 seconds ofunlocking the doors with the remotecontrol. The door locks and the alarm willreturn to their previous state.

Reprogramming the unlocking function

The unlocking function may bereprogrammed so that only the driver ’sdoor is unlocked ( See Programming theremote control (page 30). ).

Locking and unlockingconfirmation

Note: If your vehicle has double locking, thedirection indicators will only flash twiceonce you have activated double locking.

When you lock the doors, the directionindicators will flash twice.When you unlock the doors, the directionindicators will flash once.

34

Locks



Left-hand side

Turn clockwise to lock.

Right-hand sideTurn anti-clockwise to lock.

Unlocking

Note: If the child safety locks have also been activated, pulling the internal lever willonly deactivate the emergency locking and not the child safety lock. The doors can only be opened using the external door handle.

Note: If the doors have been unlocked using

this method, the doors must be locked individually until the central locking function has been repaired.

Unlock the driver's door using the key. Theother doors can be unlocked individuallyby pulling the interior door handles onthose doors.

KEYLESS ENTRY

General informationWARNING

The keyless entry system may notfunction if the key is close to metalobjects or electronic devices such as

mobile phones.

The passive entry system will not functionif:•

The vehicle battery is flat.• The passive key frequencies arejammed.

• The passive key battery is flat.Note: If the passive entry system does notfunction, you will need to use the key bladeto lock and unlock your vehicle.

The keyless system allows the driver tooperate the vehicle without the use of akey or remote control.

Passive locking and unlocking requires avalid passive key to be located within one

of the three external detection ranges.These are located approximately one anda half metres from the driver and frontpassenger door handles and the luggagecompartment lid.

Passive key The vehicle can be locked and unlockedwith the passive key. The passive key canalso be used as a remote control. SeeLocking and Unlocking (page 34).

Locking the vehicle

WARNINGThe vehicle does not lock itselfautomatically. If no locking button ispressed, the vehicle will remain

unlocked.

36

Locks



ADJUSTING THE STEERINGWHEEL

WARNINGNever adjust the steering wheelwhen the vehicle is moving.

Note: Make sure that you are sitting in thecorrect position. See Sitting in the Correct Position (page 81).

WARNINGMake sure that you fully engage thelocking lever when returning it to its

original position.

AUDIO CONTROL

Volume upASeek upBVolume downCSeek downDModeE

ModePress and hold the mode button to selectthe audio source.Press the mode button to:• tune the radio to the next preset

station•

accept an incoming telephone call• end a telephone call.

SeekPress the seek button to:• tune the radio to the next station up or

down the frequency band• play the next or the previous CD track.

41

Steering Wheel



Press and hold the seek button to:• tune the radio up or down the

frequency band• seek through a CD track.

VOICE CONTROL

Press the button to select or deselect voicecontrol.For further information See Voice control(page 185).

42

Steering Wheel



High sensitivityAOnBLow sensitivityC

If you switch autowipers on, the wipers willnot cycle until water is detected on thewindscreen. The rain sensor will thencontinuously measure the amount of wateron the windscreen and adjust the speedof the wipers automatically.Adjust the sensitivity of the rain sensorusing the rotary control. With low

sensitivity, the wipers will operate whenthe sensor detects a lot of water on thewindscreen. With high sensitivity, thewipers will operate if the sensor detects asmall amount of water on the windscreen.

WINDSCREEN WASHERS

WARNINGDo not operate the washer for morethan 10 seconds at a time, and neverwhen the reservoir is empty.

While the button at the end of the lever ispressed the washer will work inconjunction with the wipers.

After releasing the button, the wipersoperate for a short time.

REAR WINDOW WIPER ANDWASHERS

Intermittent wipe

Pull the lever towards the steering wheel.

Reverse gear wipeThe rear wiper will be activatedautomatically when selecting reverse gearif:• the rear wiper is not already switched

on,• the wiper lever is in position A , B , C or

D and• the front wiper is operating (when set

to position B).The rear wiper will follow the front wiperinterval (at intermittent or normal speed).

44

Wipers and Washers



Rear window washer

WARNINGDo not operate the washer for morethan 10 seconds at a time, and neverwhen the reservoir is empty.

While the lever is pulled towards thesteering wheel the washer will work inconjunction with the wipers.Once the wash and wipe cycle iscompleted, the wipers will pause and thenperform one more wipe to clear thewindscreen.After releasing the lever, the wipersoperate for a short time.

CHECKING THE WIPERBLADES

Run the tip of your fingers over the edge ofthe blade to check for roughness.Clean the wiper blade lips with waterapplied with a soft sponge.

CHANGING THE WIPERBLADESWindscreen wiper blades

1. Press the locking button.2. Remove the wiper blade.Note: Make sure that the wiper blade locksinto place.

3. Install in the reverse order.

45

Wipers and Washers



Rear window wiper blade1. Lift the wiper arm.

2. Position the wiper blade at right anglesto the wiper arm.

3. Disengage the wiper blade from thewiper arm.

4. Remove the wiper blade.Note: Make sure that the wiper blade locks

into place.5. Install in the reverse order.

46

Wipers and Washers



Recommended headlamp levelling control positions

Control positionLoad in luggage

compartment1

Load

Rear seatsFront seats

0--1-2

2-31-2

2.5Max31-2

3.5 2Max-1-22

4Max-11

See Vehicle Identification Plate (page 158).2Van only.

HAZARD WARNING FLASHERS

Note: Depending on applicable laws and regulations in the country for which your vehicle was originally built, the hazard warning flashers may flash if you brake

heavily.

For item location: See At a Glance (page10).

DIRECTION INDICATORS

Note: Tap the lever up or down to make thedirection indicators flash only three times.

INTERIOR LAMPS

Courtesy lamp

OffA

Door contactB OnC

49

Lighting



CHANGING A BULB

WARNINGS

Switch the lights and the ignition off.

Let the bulb cool down beforeremoving it.

CAUTIONSDo not touch the glass of the bulb.

Only fit bulbs of the correct

specification. See BulbSpecification Chart (page 55).

Headlamp

Direction indicator

1. Remove the headlamp. SeeRemoving a Headlamp (page 50).

2. Remove the cover.3. Turn the bulb holder anti-clockwise

and remove it.

4. Gently press the bulb into the bulbholder, turn it anti-clockwise andremove it.

Headlamp dipped beam1. Remove the headlamp. See

Removing a Headlamp (page 50).

2. Remove the cover.3. Turn the bulb holder anti-clockwise

and remove it.4. Remove the bulb.

Headlamp main beam


51

Lighting



2. Remove the cover.3. Release the retaining clip. Turn the bulb

holder anti-clockwise and remove it.4. Remove the bulb.

Side lamp


2. Remove the cover.3. Pull the bulb holder and remove it.

Remove the bulb.

Side repeaters

1. Press the side of the cover to release

the clips.2. Remove the cover.

3. Remove the bulb and bulb holder.Remove the bulb.

52

Lighting



Front fog lamps

Note: The front fog lamps are not serviceable items, please consult your

dealer if these fail.

Rear lamps

1. Remove the screws.

2. Lift up the luggage compartment seal.

3. Remove the carpet.

4. Remove the wing nut.5. Remove the rear lamp and unclip thebulb holder.

53

Lighting



Tail and BrakeAReverseBIndicatorC

4. Remove the bulb.

Rear fog lamps

Note: The rear fog lamps are not serviceable items, please consult your dealer if these fail.

Central high mounted brake lamp

Note: The LED board is not a serviceableitem, please consult your dealer if this fails.

Number plate lamp

1. Carefully release the spring clip.

2. Remove the lamp.3. Remove the bulb.

Interior lamp

1. Carefully prise out the lamp.2. Turn the bulb holder anti-clockwise

and remove it.3. Remove the bulb.

Reading lamps

1. Carefully prise out the lamp.2. Turn the bulb holder anti-clockwiseand remove it.

3. Remove the bulb.

54

Lighting



Luggage compartment lamp andfootwell lamp

1. Carefully prise out the lamp.2. Remove the bulb.

BULB SPECIFICATION CHART

Power (watt)SpecificationLamp

21PY21WFront direction indicator

55H1Headlamp main beam

55H7Headlamp dipped beam

5WY5WSide repeater

55H11Front fog lamp

5W5WSide lamp

21PY21WRear direction indicator

21/5P21/5WBrake and tail lamp

21P21WRear fog lamp16W16WReversing lamp

5W5WNumber plate lamp

6W6WInterior lamp

5W5WReading lamp

5W5WLuggage compartment lamp

55

Lighting



Electric folding mirrors

Automatic folding and unfolding

Note: If the mirrors have been folded usingthe manual fold button they can only beunfolded using the manual fold button.

The mirrors will fold automatically whenyou lock the vehicle with the key, theremote control or a keyless entry systemrequest. The mirrors will unfold when youunlock the vehicle with the key, the remotecontrol, a keyless entry system request,the driver's interior door handle or startingthe engine.

Manual folding and unfolding

AUTO-DIMMING MIRROR

The auto-dimming mirror will adjustautomatically when hit by glaring lightfrom behind. It will not work when you haveselected reverse gear.

58

Windows and Mirrors



GAUGES

TachometerAInformation display and Engine coolant temperature gaugeBSpeedometerCFuel gaugeDTripmeter reset buttonE

Fuel gaugeThe arrow adjacent to the fuel pumpsymbol indicates on which side of thevehicle the fuel filler cap is located.

Engine coolant temperature gauge

Shows the temperature of the enginecoolant. At normal operating temperaturethe indicator will remain in the centresection.

WARNING LAMPS ANDINDICATORS

The following warning lamps andindicators illuminate when the ignition isswitched on:•

ABS• Airbag• Brake system• Coolant temperature• Doors open• Engine• Frost• Ignition

59

Instrument Cluster



• Oil pressure• Power steering• Stability control (ESP)

If a warning or indicator lamp does notilluminate when the ignition is switchedon, it indicates a malfunction. Have thesystem checked by a properly trainedtechnician.

ABS warning lampIf it illuminates when you aredriving, this indicates amalfunction. You will continue

to have normal braking (without ABS).Have the system checked by a properlytrained technician as soon as possible.

Airbag warning lampIf it illuminates when driving, thisindicates a malfunction. Havethe system checked by a

properly trained technician.

Brake system lampIt illuminates when the parkingbrake is engaged.

WARNINGReduce your speed gradually andstop your vehicle as soon as it is safeto do so. Use your brakes with care.

If it illuminates when you are driving, checkthat the parking brake is not engaged. Ifthe parking brake is not engaged, thisindicates a malfunction. Have the systemchecked by a properly trained technicianimmediately.

Coolant temperature warninglamp

CAUTIONDo not resume your journey if itilluminates despite the level beingcorrect. Have the system checked by

a properly trained technician immediately.

If it stays on after starting orilluminates when driving, thisindicates a malfunction. Stop

your vehicle as soon as it is safe to do soand switch the engine off. Check the

coolant level. See Engine Coolant Check(page 137).

Cruise control indicatorIt will illuminate when you haveset a speed using the cruisecontrol system. See Using

Cruise Control (page 110).

Direction indicatorFlashes during operation. Asudden increase in the rate offlashing warns of a failed

indicator bulb. See Changing a Bulb(page 51).

Doors open warning lampIlluminates when the ignition isswitched on and remains on ifany door, the bonnet or the

luggage compartment is not closedproperly.

60

Instrument Cluster



Engine warning lamps

Malfunction indicator lamp

Powertrain warning lamp

All vehicles

If either lamp illuminates when the engineis running, this indicates a fault. The engine

will continue to run but it may have limitedpower. If it flashes when you are driving,reduce the speed of your vehicleimmediately . If it continues to flash, avoidheavy acceleration or deceleration. Havethe system checked by a properly trainedtechnician immediately.

WARNINGHave this checked immediately.

If both lamps illuminate together, stop your vehicle as soon as it is safe to doso (continued use may cause reducedpower and cause the engine to stop). Turnthe ignition off and attempt to restart theengine. If the engine restarts have thesystem checked by a properly trainedtechnician immediately. If the engine doesnot restart the vehicle must be checkedbefore continuing your journey.

Front fog lamp indicatorIt will illuminate when you switchthe front fog lamps on.

Frost warning lamp

WARNING

Even if the temperature rises toabove +4ºC there is no guaranteethat the road is free of hazards

caused by inclement weather.

It will illuminate and glow orangewhen the outside airtemperature is between 4ºC and

0ºC. It will glow red when the temperatureis below 0ºC.

Fuel in oil warning lampIt will illuminate when the engineoil has been diluted with fuel.Have the engine oil changed assoon as possible.

Oil pressure warning lamp

CAUTIONDo not resume your journey if itilluminates despite the level beingcorrect. Have the system checked by


If it stays on after starting orilluminates when driving, thisindicates a malfunction. Stop

your vehicle as soon as it is safe to do soand switch the engine off. Check the engineoil level. See Engine Oil Check (page 137).

Glow plug indicatorIf it illuminates, wait until itextinguishes before starting.

Headlamp indicatorIt will illuminate when you switchthe headlamp dipped beam orthe side and tail lamps on.

61

Instrument Cluster



Ignition warning lampIf it illuminates when driving, thisindicates a malfunction. Switchoff all unnecessary electricalequipment. Have the system checked by


Low fuel level warning lampIf it illuminates, refuel as soon aspossible.

Main beam indicator

It will illuminate when you switchthe headlamp main beam on. Itwill flash when you use the

headlamp flasher.

Message indicatorIt will illuminate when a newmessage is stored in theinformation display. See

Information Messages (page 70).

Power steering warning lampIlluminates to indicate amalfunction of the powersteering system. Full steering will

be maintained but you will need to exertgreater force on the steering wheel. Havethe system checked by a properly trainedtechnician as soon as possible.

Rear fog lamp indicatorIt will illuminate when you switchthe rear fog lamps on.

Seat belt reminderSee Seat belt reminder (page28).

Shift indicatorIt will illuminate to inform youthat shifting to a higher gear maygive better fuel economy andlower CO2 emissions. It will not illuminate

during periods of high acceleration, brakingor when the clutch pedal is pressed.

Stability control (ESP) indicatorWhile driving, it flashes duringactivation of the system. Afterswitching on the ignition, if it

does not illuminate or illuminates

continuously while driving, this indicates amalfunction. During a malfunction, thesystem switches off. Have the systemchecked by a properly trained technicianas soon as possible.

If you switch ESP off, the warning lamp willilluminate. The lamp will go out when youswitch the system back on or when youswitch the ignition off.

AUDIBLE WARNINGS ANDINDICATORS

Automatic transmissionIf position P is not selected, a warningchime will sound when the driver ’s door isopened.

Key outside car

Vehicles with the keyless systemIf the engine is running and a passive keyis no longer detected within the vehicleinterior, a warning chime will sound as soonas the door is closed.

Lights onA warning chime will sound if the driver ’sdoor is opened with the exterior lightsswitched on and the ignition switched off.

62

Instrument Cluster



Low fuelA warning chime will sound when the lowfuel warning lamp illuminates.

Seat belt reminder

WARNINGSThe seat belt reminder remains instand-by mode when the front seatbelts have been fastened. It will be

reactivated if either seat belt is unfastened.Do not sit on top of a fastened seatbelt to prevent the seat belt reminderfrom coming on. The occupant

protection system will only provideoptimum protection when you use the seatbelt properly.

When the vehicle ’s speed exceeds thepre-determined limit, a warning chime willsound if either of the front seat belts areunfastened. The chime will stop after fiveminutes.

63

Instrument Cluster



GENERAL INFORMATION

Note: The information display will remainon for several minutes after you switch off the ignition.

Various systems can be programmed usingthe audio unit controls.

Device listThe icon changes to show the currentfunction in use.

CD

Radio

Auxiliary input

Phone

Settings

Controls

Press the up and down arrow buttons toscroll through and highlight the optionswithin a menu.Press the right arrow button to enter asub-menu.Press the left arrow button to exit a menu.Hold the left arrow button pressed at anytime to return to the main menu display(escape button).Press the OK button to choose andconfirm a setting.

Menu structure

Type 1

64

Information Displays



65




Type 2

Note: Phone menu depends on phonecapabilities and call status etc.

Use the MENU button and left arrow keyto access the menus.

66




67




Type 3

Note: Phone menu depends on phonecapabilities and call status etc.

Use the MENU button and left arrow keyto access the menus.

68




TRIP COMPUTER

Press the button to scroll through the

displays.To reset the trip, average fuelconsumption and averagespeed, scroll to the required

display. Press and hold the button until alldashes are displayed.

The trip computer includes the followinginformation displays:

Trip

Registers the mileage ofindividual journeys.

Distance to empty

Indicates the approximatedistance the vehicle will travelon the fuel remaining in the tank.

Changes in driving pattern may cause thevalue to vary.

Average fuel consumption

Indicates the average fuelconsumption since the functionwas last reset.

Instantaneous fuel consumption

Indicates the current fuelconsumption.

Stationary fuel consumption

Indicates the current fuelconsumption while stationary.

Average speed

Indicates the average speedcalculated since the functionwas last reset.

Odometer

Registers the total mileage ofthe vehicle.

PERSONALISED SETTINGS

Measure units

To toggle between metric and imperialunits, scroll to this display and press theOK button.Toggling the measure units using thisdisplay will affect the following displays:• Distance to empty• Average fuel consumption• Instantaneous fuel consumption• Average speed

69




ActionWarning lampMessage

See Keyless Starting (page 89).amberTurn ignition off use POWERbutton

See Keyless Starting (page 89).-To start press brake

See Keyless Starting (page 89).-To start press clutch

See Keyless Entry (page 36).-Close boot or use spare key

See Steering Wheel Lock (page90).-Steering lock engaged turn

steering wheel

Lighting


See Changing a Bulb (page 51).-Left indicator malfunction changebulb

See Changing a Bulb (page 51).-Right indicator malfunctionchange bulb

Maintenance

ActionWarning lampMessageSee Brake and Clutch FluidCheck (page 138).redBrake fluid level low stop safely

Have the system checked by aproperly trained technician imme-diately.

redBrake system malfunction stopsafely

See Engine Oil Check (page 137).redEngine oil pressure low stop safely

Have the system checked by aproperly trained technician assoon as possible.

amberEngine malfunction service now

Have the system checked by aproperly trained technician.amberAuto wiper/lights malfunction

next service

Have the system checked by aproperly trained technician.-Engine oil change due next service

72





See Starting and Stopping theEngine (page 89).-To start press brake

See Automatic Transmission(page 101). See Starting andStopping the Engine (page 89).

-To start select N

See Automatic Transmission(page 101). See Starting andStopping the Engine (page 89).

-Door open apply brake

Stability control (ESP)


Have the system checked by aproperly trained technician assoon as possible.

amberABS malfunction service now

Have the system checked by aproperly trained technician.-ESP malfunction next service

See Using Stability Control(page 105).-ESP off

74




MANUAL CLIMATE CONTROL

Air distribution control

FootwellAFootwell and windscreenBWindscreenCFace levelD

Face level and footwellEYou can set the air distribution control toany position between the symbols.

Blower

OffA

Note: If you switch the blower off, thewindscreen may mist up.

Recirculated air

Press the button to toggle between outsideair and recirculated air.

System settings

Note: Set all controls to the positions shown.

Measure units

Note: The outside air temperature is only displayed in degrees Celsius and cannot be set to degrees Fahrenheit.

Heating the interior quickly

Ventilation

76

Climate Control



Set the air distribution control, blower andair vents to suit your requirements.

Switching the air conditioning on andoff

If you turn the blower off, the airconditioning will turn off. When you turnthe blower on again, the air conditioningwill come on automatically.

Cooling with outside air

Cooling the interior quickly

Defrosting and demisting thewindscreen

When the temperature is above 4°C(39°F), the air conditioning will switch onautomatically. Make sure that the bloweris on. The indicator in the switch willilluminate during defrosting and demisting.If you move the air distribution control toa position other than C , the A/C willremain on.You can switch the air conditioning andrecirculated air on and off while the airdistribution control is set to position C .

If necessary, switch the heated windowson. See Heated Windows and Mirrors(page 79).

Reducing interior air humidity

77

Climate Control



AUTOMATIC CLIMATECONTROL

The system controls the temperature,amount and distribution of the air flowautomatically and adjusts them accordingto the driving and weather conditions.Pressing the AUTO button once switcheson the auto mode.Note: Avoid adjusting the settings whenthe vehicle interior is extremely hot or cold.The automatic climate control adjusts tothe current circumstances automatically.For the system to function properly, the side and centre vents should be fully open.Note: The sunload sensor is located on topof the instrument panel. Do not cover the sensor with any objects.

Note: At low outside temperatures, whenthe system is in auto mode, the air streamwill be directed to the windscreen and the side windows as long as the engine is cold.

Units of measure

Note: The outside air temperature is only displayed in degrees Celsius and cannot be set to degrees Fahrenheit.

Setting the temperature

You can set the temperature between 16ºC(61°F) and 28ºC (82°F) in steps of 0.5ºC(1°F). In position LO , below 16ºC (61°F),the system will switch to permanentcooling. In position HI , above 28ºC (82°F),the system will switch to permanentheating. In these positions the system willnot regulate a stable temperature.

Blower

The blower setting is indicated in thedisplay.To return to auto mode, press the AUTObutton.

Air distributionTo adjust air distribution, press the desiredbutton. Any combination of settings canbe selected simultaneously.

FootwellAFace levelBWindscreenC

78

Climate Control



When you select windscreen defrostingand demisting, A , B and C switch offautomatically and the air conditioningswitches on. Outside air will flow into thevehicle. You cannot select recirculated air.

Windscreen defrosting anddemisting

Press the windscreen defrosting anddemisting button. Outside air will flow intothe vehicle. Air conditioning is

automatically selected. As long as the airdistribution is set to this position, youcannot select recirculated air.The blower speed and the temperaturecontrol operate automatically and cannotbe adjusted manually. The blower is set tohigh speed and the temperature to HI .When you select windscreen defrostingand demisting, the heated screens switchon automatically and switch off after a

short time.To return to auto mode, press the AUTObutton.

Switching the air conditioning onand off

Press the A/C button to switch the air

conditioning on and off. A/C OFF appearsin the display when the air conditioning isswitched off.A/C ON appears in the display when theair conditioning is switched on.

Recirculated air

Press the recirculated air button to togglebetween outside air and recirculated air.Note: When the system is in auto mode and

the interior and exterior temperatures arequite hot, the system selects recirculated air automatically to maximise cooling of theinterior. Once the selected temperature is reached, the system will reselect outside air automatically.

Switching off the automaticclimate control

Press the OFF button.When switched off, the heating, ventilationand air conditioning system is switched offand recirculated air is selected.

HEATED WINDOWS ANDMIRRORS

Heated windowsUse the heated windows to defrost ordemist the windscreen or rear window.Note: The heated windows operate only when the engine is running.

Heated windscreen

Heated rear window

79

Climate Control



Heated exterior mirrorsElectric exterior mirrors are fitted with aheating element that will defrost or demistthe mirror glass. They will switch onautomatically when you switch the heatedrear window on.

80

Climate Control



SITTING IN THE CORRECTPOSITION

WARNINGSDo not adjust the seats when thevehicle is moving.

Only when you use the seat beltproperly, can it hold you in a positionthat allows the airbag to achieve its

optimum effect.

When you use them properly, the seat,head restraint, seat belt and airbags willprovide optimum protection in the eventof a collision. We recommend that you:• sit in an upright position with the base

of your spine as far back as possible.• do not recline the seatback more than

30 degrees.• adjust the head restraint so that the

top of it is level with the top of yourhead and as far forwards as possible,remaining comfortable.

• keep sufficient distance betweenyourself and the steering wheel. Werecommend a minimum of 250millimetres (10 inches) between yourbreastbone and the airbag cover.

• hold the steering wheel with your armsslightly bent.

• bend your legs slightly so that you canpress the pedals fully.

• position the shoulder strap of the seat

belt over the centre of your shoulderand position the lap strap tightly acrossyour hips.

Make sure that your driving position iscomfortable and that you can maintain fullcontrol of your vehicle.

HEAD RESTRAINTS

WARNINGS

Raise the rear head restraint whenthe rear seat is occupied by apassenger.When front seats are in use the headrestraints must not be removed.

Adjusting the head restraintsAdjust the head restraint so that the topof it is level with the top of your head.

Removing the head restraintsFront head restraints

81

Seats



Press locking button 1 and at the sametime release the retaining clip 2 using asuitable implement.

Rear outer head restraints

Press locking button 1 and at the sametime release the retaining clip 2 using asuitable implement.

Rear centre head restraint

Press the locking buttons and remove thehead restraint.

MANUAL SEATS

WARNINGSDo not use any accessory seat coversthat are not specifically designed forseats with side airbags. These seat

covers must be fitted by properly trainedtechnicians.

WARNINGSDo not adjust the seats while thevehicle is moving.

Moving the seats forwards orbackwards

WARNINGRock the seat backwards andforwards after releasing the lever tomake sure that it is fully engaged in

its catch.

82

Seats



Folding the seatback forwards - 3-door

1. Pull the locking lever to release theseatback.

Note: Do not hold on to the locking lever when moving the seat.

2. Push the seatback forwards to lock itin the folded position.3. Continue to push the seatback to slide

the seat forwards.

Returning the seatback to theseating position - 3-door

WARNINGDo not place any objects behind theseatback which could prevent theengagement of the seat lock.

1. Slide the seat backwards to the endstop (memory position) or desiredforward seating position.

Note: The memory function is only available on the driver's seat.

2. Pull the locking lever to release the

seatback.3. Unfold the seatback until it locks witha distinct click.

Adjusting the lumbar support

83

Seats



Adjusting the height of the driver ’ sseat

Each pull or press on the lever will raise orlower the height by a small amount.

Adjusting the angle of theseatback

REAR SEATS

Folding the seatbacks down

WARNINGWhen folding the seatbacks down,take care not to get your fingerscaught between the seatback and

seat frame.

CAUTIONSDo not attempt to fold the rear seatcushion forwards.

Lower the head restraints. See HeadRestraints (page 81).

1. Press the unlock buttons down andhold them there.

2. Push the seatback forwards.

WARNINGSWhen folding the seatbacks up,make sure that the belts are visibleto an occupant and not caught

behind the seat.Make sure that the seats and theseatbacks are secure and fullyengaged in their catches.

84

Seats



HEATED SEATS

CAUTION

Operating this function with theengine off will drain the battery.

The seat heating will operate only whenthe ignition is switched on.The maximum temperature is reachedafter five or six minutes. It is regulatedthermostatically.The seat heating will remain on until eitherthe heated seat switch or the ignition isturned off.

85

Seats



SUN VISORS

CLOCK

To adjust the clock, switch the ignition onand press buttons H or M as necessary.

CUP HOLDERS

WARNINGDo not place hot drinks in the cupholders when the vehicle is moving.

CIGAR LIGHTER

CAUTIONSIf you use the socket when the engineis not running, the battery maydischarge.Do not hold the cigar lighter element

pressed in.

Note: You can use the socket to power 12volt appliances that have a maximumcurrent rating of 15 Amperes. Use only Ford accessory connectors or connectors specified for use with SAE standard sockets.

Press the element in to use the cigarlighter. It will pop out automatically.

STORAGE COMPARTMENTS

WARNINGDo not drive with any storagecompartment lid open. Make surethat you secure the lid before setting

off.

CAUTIONDo not keep heat-sensitive items andliquids in any storage compartment.

86

Convenience features



1. Make sure the transmission is in P orN .

2. Fully depress the brake pedal.

3. Briefly press the start button.Starting with manual transmission

Note: Releasing the clutch pedal duringengine start will stop the engine cranking and return to ignition on.

1. Fully depress the clutch pedal.2. Briefly press the start button.

Starting a diesel engine

Note: Engine cranking will not commenceuntil the engine glow plug cycle has beencompleted. This may take several secondsin extremely cold conditions.

Note: Continue to press the clutch or brake pedal until engine cranking begins.

Failure to startThe passive starting system will notfunction if:• The passive key frequencies are

jammed.• The passive key battery is flat.If you are unable to start your vehicle carryout the following procedure.

1. Hold the key next to the steeringcolumn shroud exactly as shown.

2. With the key in this position you canuse the start button to switch theignition on and start your vehicle.

Stopping the engine with the vehicle stationary

Note: The ignition, all electrical circuits,warning lamps and indicators will be switched off.

Manual transmission

Press the start button.

Automatic transmission

1. Move the selector lever to position P .2. Press the start button.

Stopping the engine when the vehicle is moving

WARNINGSwitching off the engine when thevehicle is still moving will result in aloss of brake and steering assistance.

The steering will not be locked, but highereffort will be required. When the ignition isswitched off some electrical circuits,warning lamps and indicators may also beOFF.

Press and hold the start button for twoseconds, or press three times within threeseconds.

STEERING WHEEL LOCKWARNING

Always check that the steering isunlocked before attempting to moveyour vehicle.

Vehicles without keyless startingTo activate the steering wheel lock;

90

Starting and Stopping the Engine



1. Remove the key from the ignitionswitch.

2. Turn the steering wheel.

Vehicles with keyless startingNote: The steering wheel lock will not activate when the ignition is on or thevehicle is moving.

Your vehicle has an electronicallycontrolled steering wheel lock. Thisoperates automatically.The steering wheel lock will activate aftera short period of time once you have

parked your vehicle and the passive key isoutside of the vehicle.

Deactivating the steering wheel lock

Switch the ignition on, or:Vehicles with automatic transmission• Press the brake pedal.Vehicles with manual transmission• Press the clutch pedal.

STARTING A PETROL ENGINE

Note: You can only operate the starter for a limited period of time, for example 10 seconds. The number of start attempts islimited to approximately six. If you exceed this limit, the system will not allow you totry again until a period of time has elapsed,for example 30 minutes. A message will be shown in the display. See Information

Messages (page 70).Cold or hot engine

Vehicles with manual transmission

Note: Do not touch the accelerator pedal.

Note: Releasing the clutch pedal duringengine start may stop the engine cranking and return to ignition on.

1. Fully depress the clutch pedal.2. Start the engine.

Vehicles with automatic transmission

Note: Do not touch the accelerator pedal.

Note: Releasing the brake pedal duringengine start may stop the engine cranking and return to ignition on.

1. Move the transmission selector leverto position P or N.

2. Fully depress the brake pedal.3. Start the engine.

All vehiclesIf the engine does not start, wait for a shortperiod and try again.If the engine does not start after threeattempts, wait 10 seconds and follow theflooded engine procedure.If you have difficulty starting the enginewhen the temperature is below -25°C(-13°F), press the accelerator pedal to the

mid-way point of its travel and try again.Flooded engine

Vehicles with manual transmission

1. Fully depress the clutch pedal.2. Fully depress the accelerator pedal and

hold it there.3. Start the engine.

Vehicles with automatic transmission

1. Move the transmission selector leverto position P or N.

2. Fully depress the accelerator pedal andhold it there.

3. Fully depress the brake pedal.4. Start the engine.

91




If you drive only short distances or yourjourneys contain frequent stopping andstarting, where there is increasedacceleration and deceleration, occasionaltrips with the following conditions willassist the regeneration process:• Drive your vehicle at a constant speed,

preferably on a main road or motorway,for up to 20 minutes.

• Avoid prolonged idling and alwaysobserve speed limits and roadconditions.

• Do not switch off the ignition.• Use a lower gear than normal to

maintain a higher engine speed duringthis journey, where appropriate.

SWITCHING OFF THE ENGINE

Vehicles with a turbocharger

CAUTIONDo not switch the engine off when itis running at high speed. If you do, theturbocharger will continue running

after the engine oil pressure has droppedto zero. This will lead to prematureturbocharger bearing wear.

Release the accelerator pedal. Wait untilthe engine has reached idle speed and thenswitch it off.

93





CAUTION

For vehicles with Start-stop thebattery requirement is different. Itmust be replaced by one of exactly

the same specification as the original.

The system reduces fuel consumption andCO2 emissions by shutting down theengine when the vehicle is idling, forexample at traffic lights. The engine willautomatically restart when the driverpresses the clutch pedal or when requiredby a vehicle system, for example torecharge the battery.To obtain maximum benefit from thesystem, move the gear lever to the neutralposition and release the clutch pedalduring any stop of longer than threeseconds.

USING START-STOP

WARNINGSThe engine may restartautomatically if required by thesystem. See Principle of Operation

(page 94).Switch the ignition off beforeopening the bonnet or carrying outany maintenance.Always switch the ignition off beforeleaving your vehicle, as the systemmay have shut down the engine but

the ignition will still be live.

Note: The system only operates when theengine is warm and the outside temperatureis between 0°C (32°F) and 30°C (86°F).

Note: If you stall the engine, and thendepress the clutch pedal within a couple of seconds, the system will automatically restart the engine.

Note: The Start-stop indicator willilluminate green when the engine shutsdown. See Warning Lamps and Indicators(page 59).

Note: The Start-stop indicator will flash amber, requiring you to select neutral or depress the clutch pedal. In conjunction a message will be shown in the display.

Note: If the system detects a malfunction,it is deactivated. Have the system checked by a properly trained technician.Note: If you have switched the system off,the switch will be illuminated.

Note: The system is on by default. To switch the system off, press the switch inthe instrument panel. The system will only be de-activated for the current ignitioncycle. To turn it on, press the switch again.For item location. See At a Glance (page10).

To stop the engine1. Stop the vehicle.2. Move the gear lever to the neutral

position.3. Release the clutch pedal.

4. Release the accelerator pedal.The system may not shut down the engineunder certain conditions, for example:• To maintain the interior climate.• Low battery voltage.• The outside temperature is too low or

too high.• The driver's door has been opened.

94

Start-Stop




The system assists the driver to drive moreefficiently by constantly monitoringcharacteristics of gear changing,anticipation of traffic conditions andspeeds on motorways and open roads.Note: These efficiency values do not resultin a defined fuel consumption figure. It mightvary as it is not only related to these drivingdisciplines but also influenced by many other factors such as short journeys and cold starts.

Note: Frequent short journeys, where theengine does not fully warm up, will alsoincrease fuel consumption.

The value of these characteristics isrepresented by petals shown in the display,with five petals being the most efficient.The more efficiently you drive, the betterthe rating, and the better your overall fuelconsumption.

Type 1

Gear shiftingAAnticipationBEfficient speedC

Gear shifting

Using the highest drivable gear appropriatefor the road conditions will improve fuelconsumption.

Anticipation

Adjusting your vehicle speed and thedistance to other vehicles without the need

for heavy braking or acceleration willimprove fuel consumption.

Efficient speed

Higher speeds use more fuel. Reducingyour cruising speed on open roads willimprove fuel consumption.

Type 2 and 3The relevant information will be shown in

the display.

USING ECO MODE

The system is accessed using the relevantinformation display menu. SeeInformation Displays (page 64).

Resetting Eco modeReset the average fuel consumption.

Note: New values may take a short time tocalculate.

96

Eco Mode



SAFETY PRECAUTIONS

WARNINGS

Stop refuelling after the fuel nozzlestops the second time. Additionalfuel will fill the expansion space in

the fuel tank which could lead to fueloverflowing. Fuel spillage could behazardous to other road users.

Do not use any kind of flames or heatnear the fuel system. The fuel systemis under pressure. There is a risk of

injury if the fuel system is leaking.

FUEL QUALITY - PETROL

CAUTIONDo not use leaded petrol or petrol withadditives containing other metalliccompounds (e.g. manganese-based).

They could damage the emission system.

Note: We recommend that you use only high quality fuel without additives or other engine treatments.

Use minimum 95 octane unleaded petrolthat meets the specification defined by EN228, or the equivalent nationalspecification.Your vehicle is suitable for use with ethanolblends up to 10% (E5 and E10).

FUEL QUALITY - DIESEL

WARNINGDo not mix diesel with oil, petrol orother liquids. This could cause achemical reaction.

CAUTIONSDo not add kerosene, paraffin orpetrol to diesel. This could cause

damage to the fuel system.Use diesel that meets thespecification defined by EN 590 , orthe relevant national specification.

Note: We recommend that you use only high quality fuel.

Note: The use of additives or other enginetreatments not approved by Ford is not recommended.

Note: We do not recommend the prolonged use of additives intended to prevent fuelwaxing.

Long-term storageMost diesel fuels contain bio-diesel, it isrecommended to fill the tank with purelymineral diesel (where available) or add ananti-oxidant prior to long-term storage ofyour vehicle exceeding two months. Yourdealer can help you with a suitableanti-oxidant.

FUEL FILLER FLAP

WARNINGSTake care when refuelling to avoidspilling any residual fuel from the fuelnozzle.Do not use any kind of flames or heat

near the fuel system. The fuel systemis under pressure. There is a risk ofinjury if the fuel system is leaking.

CAUTIONIf you use a high pressure spray towash your vehicle, only spray the fuelfiller flap briefly from a distance not

less than 200 millimetres (8 inches).

97

Fuel and Refuelling



1. Pull the flap to open it. Open the flapfully until it engages.

Note: When you insert the fuel nozzle, a spring loaded inhibitor will open if thecorrect size nozzle is detected. This helpsto avoid filling up with the wrong fuel.

2. Insert the fuel nozzle up to andincluding the first notch on the nozzleA . Keep it resting on the cover of thefuel pipe opening.

WARNINGStop refuelling after the fuel nozzlestops the second time. Additional

fuel will fill the expansion space inthe fuel tank which could lead to fueloverflowing. Fuel spillage could behazardous to other road users.

Incorrect positionACorrect positionB

3. Do not lift the nozzle during refilling. Thiscan affect the flow of fuel and shut off ofthe fuel nozzle before the fuel tank is full.

4. Operate the nozzle within the areashown.

98

Fuel and Refuelling



WARNINGSWe recommend that you remove thefuel nozzle slowly to allow any

residual fuel to drain into the fueltank. Alternatively you can wait 10 secondsbefore removing the fuel nozzle.

Do not remove the nozzle from itsfully inserted position during theentire refuelling process.

5. Slightly raise the fuel nozzle to removeit.

Vehicles with tyre repair kitA funnel is located in the spare wheel well.

Use this when refilling with a fuel can.Vehicles without tyre repair kitA funnel is located in the glove box. Usethis when refilling with a fuel can.

CATALYTIC CONVERTER

WARNINGDo not park or idle your vehicle overdry leaves, dry grass or othercombustible materials. The exhaust

will radiate a considerable amount of heatduring use, and after you have switchedthe engine off. This is a potential firehazard.

Driving with a catalytic converter

CAUTIONSAvoid running out of fuel.

Do not crank the engine for longperiods.Do not run the engine when a sparkplug lead is disconnected.Do not push-start or tow-start yourvehicle. Use booster cables. SeeJump-Starting the Vehicle (page

143).

Do not switch the ignition off whendriving.

REFUELLING

CAUTIONDo not attempt to start the engine ifyou have filled the fuel tank with theincorrect fuel. This could damage the

engine. Have the system checked by aproperly trained technician immediately.

FUEL CONSUMPTION

The CO2 and fuel consumption figures arederived from laboratory tests according toEEC Directive 80/1268/EEC andsubsequent amendments and are carriedout by all vehicle manufacturers.They are intended as a comparisonbetween makes and models of vehicles.They are not intended to represent the realworld fuel consumption you may get fromyour vehicle. Real world fuel consumptionis governed by many factors including;driving style, high speed driving, stop/startdriving, air conditioning usage, theaccessories fitted and towing etc.Your Ford dealer can give you advice onimproving your fuel consumption.

99

Fuel and Refuelling



Note: An audible warning will sound if youopen the driver's door and you have not selected park.

Note: The battery saver will deactivate thewarning chime after a period of time.

In this position, power is not transmittedto the drive wheels and the transmissionis locked. You can start the engine with theselector lever in this position.

Reverse

WARNINGSelect reverse only when your vehicleis stationary and the engine is at idlespeed.

Neutral

In this position, power is not transmittedto the drive wheels but the transmission isnot locked. You can start the engine withthe selector lever in this position.

Drive

Select drive to shift automatically throughthe forward gears.

Manual shifting

Note: A shift will occur only when thevehicle speed and the engine speed are appropriate.

Select manual shifting to shift manuallythrough the forward gears. Push theselector lever forwards to shift down and

pull it backwards to shift up.WARNING

Do not hold the selector leverpermanently in – or + .

Gears can be skipped by moving theselector lever repeatedly at short intervals.

Manual mode also provides a kickdownfunction. See Kickdown .The transmission will automatically

downshift when the engine speed is toolow and upshift when to high.

Drive modesThe transmission will select theappropriate gear for optimum performancebased on ambient temperature, roadgradient, vehicle load and driver input.

Hints on driving with an automatictransmission

Moving off

WARNINGIt is not possible to tow-start orpush-start a vehicle fitted with anautomatic transmission. See

Jump-Starting the Vehicle (page 143).

1. Release the parking brake.2. Release the brake pedal and press the

accelerator pedal.

Stopping

1. Release the accelerator pedal andpress the brake pedal.

2. Apply the parking brake.

Kickdown

Press the accelerator pedal fully with theselector lever in the drive position to selectthe next lowest gear for optimumperformance. Release the acceleratorpedal when you no longer requirekickdown.

102

Transmission



Emergency park position releaseleverUse the lever to move the selector leverfrom the park position in the event of anelectrical malfunction or if your vehicle hasa flat battery.

CAUTIONTake care when lifting up the hingedcover.

Lift up the hinged cover in the centreconsole next to the selector lever with asmall flat bladed tool.

With a suitable object push down thelocking lever in the slot and simultaneouslymove the selector lever out of the Pposition.Note: If position P is selected again, this procedure must be repeated.

103

Transmission




Disc brakes

Wet brake discs result in reduced brakingefficiency. Dab the brake pedal whendriving from a car wash to remove the filmof water.

ABS

WARNINGThe ABS does not relieve you of yourresponsibility to drive with due careand attention.

The ABS helps you to maintain full steeringand directional stability when you brakeheavily in an emergency, by preventing theroad wheels from locking.

HINTS ON DRIVING WITHANTI-LOCK BRAKES

Note: When the system is operating, the brake pedal will pulse and may travelfurther. Maintain pressure on the brake pedal. You may also hear a noise from the system. This is normal.

The ABS will not eliminate the risks when:• you drive too close to the vehicle in

front of you• the vehicle is aquaplaning• you take corners too fast•

the road surface is poor.

PARKING BRAKE

WARNINGVehicles with an automatictransmission should always be leftwith the selector lever in position P

(Park) .

• Press the foot brake pedal firmly.• Pull the parking brake lever up smartly

to its fullest extent.•

Do not press the release button whilepulling the lever up.• If your vehicle is parked on a hill and

facing uphill, select first gear or P(Park) and turn the steering wheelaway from the kerb.

• If your vehicle is parked on a hill andfacing downhill, select reverse gear orP (Park) and turn the steering wheeltowards the kerb.

To release the parking brake, press thebrake pedal firmly, pull the lever up slightly,depress the release button and push thelever down.

104

Brakes




WARNING

The parking aid does not relieve youof your responsibility to drive withdue care and attention.

CAUTIONSVehicles fitted with a trailer towmodule not approved by us may notcorrectly detect obstacles.The sensors may not detect objectsin heavy rain or other conditions thatcause disruptive reflections.The sensors may not detect objectswith surfaces that absorb ultrasonicwaves.The parking aid does not detectobstacles moving away from thevehicle. They will only be detected

shortly after they start to move towardsthe vehicle again.

Take particular care when reversingwith a tow ball arm or rear fittedaccessories e.g. a bicycle carrier, as

the rear parking aid will only indicate thedistance from the bumper to the obstacle.

If you use a high pressure spray towash your vehicle, only spray thesensors briefly from a distance not

less than 20 centimetres (8 inches).

Note: On vehicles fitted with a tow ball

arm, the parking aid is deactivated automatically when any trailer lamps (or lighting boards) are connected to the 13-pin socket via a trailer tow module we have approved.

Note: Keep the sensors free from dirt, ice and snow. Do not clean with sharp objects.

Note: The parking aid may emit false tonesif it detects a signal using the samefrequency as the sensors or if the vehicle isfully laden.

Note: The outer sensors may detect the side walls of a garage. If the distance between the outer sensor and the side wall remains constant for three seconds, thetone will switch off. As you continue, theinner sensors will detect rearward objects.

PARKING AID - VEHICLESWITH: REAR PARKING AID

WARNINGThe parking aid does not relieve youof your responsibility to drive withdue care and attention.

The parking aid is automatically activatedwhen you select reverse gear with theignition switched on.You will hear an intermittent tone at adistance of approximately 150 centimetres(59 inches) between the obstacle and rear

bumper and approximately 50 centimetres(20 inches) to the side. Decreasing thedistance accelerates the intermittent tone.A continuous tone will start at a distanceof less than 30 centimetres (11 inches) tothe rear bumper.Note: If a high pitch tone is heard for three seconds, this indicates a malfunction. The system will be disabled. Have the systemchecked by a properly trained technician.

106

Parking Aids




The camera is a visual aid for use whenreversing.

WARNINGThe system does not relieve you ofyour responsibility to drive with duecare and attention.

CAUTIONSIf you use a high pressure spray towash your vehicle, only spray thecamera briefly from a distance not

less than 20 centimetres (8 inches).Do not apply pressure to the camera.

Note: Keep the camera free from dirt, ice and snow. Do not clean with sharp objects,degreaser, wax or organic products. Use only a soft cloth.

During operation, guide lines appear in thedisplay which represent your vehicle's pathand approximate distance from rearwardobjects.

REAR VIEW CAMERA

WARNINGSThe operation of the camera mayvary depending on the ambienttemperature, vehicle and road

conditions.The distances shown in the displaymay differ from the actual distance.

Do not place objects in front of thecamera.

The camera is located on the luggagecompartment lid near the handle.

Activating the rear view camera

CAUTION

The camera may not detect objectsthat are close to the vehicle.

With the ignition switched on, engagereverse gear. The image is displayed in theinterior mirror.The camera may not operate correctly inthe following conditions:• Dark areas.• Intense light.• If the ambient temperature increases

or decreases rapidly.• If the camera is wet, for example in rain

or high humidity.• If the camera's view is obstructed, for

example by mud.

Using the display

CAUTIONS

Obstacles above the camera positionwill not be shown. Inspect the areabehind your vehicle if necessary.Marks are for general guidance only,and are calculated for vehicles inmaximum load conditions on an even

road surface.

Note: When reversing with a trailer, the lineson the screen show the vehicle direction and not the trailer.

108

Rear view camera



AccelerateADecelerateB

Cancelling the set speed

Press the brake pedal or the CAN RESswitch.Note: The system will no longer control your speed. The cruise control indicator will not illuminate but the system will retain the speed that you previously set.

Resuming the set speed

The cruise control indicator will illuminateand the system will attempt to resume thespeed that you previously set.

Switching cruise control off

The system will not retain the speed thatyou previously set. The cruise controlindicator will not illuminate.

111

Cruise Control



GENERAL INFORMATION

WARNINGS

Use load securing straps to anapproved standard, e.g. DIN.

Make sure that you secure all looseitems properly.

Place luggage and other loads as lowand as far forward as possible withinthe luggage or loadspace.Do not drive with the tailgate or reardoor open. Exhaust fumes may enterthe vehicle.Do not exceed the maximum frontand rear axle loads for your vehicle.See Vehicle identification (page

158).

CAUTIONSDo not allow items to contact the rearwindows.Do not use any abrasive materials to

clean the interior of the rear windows.Do not install stickers or labels to theinterior of the rear windows.

LUGGAGE COVERS

CAUTIONDo not place objects on the luggagecover.

ROOF RACKS AND LOADCARRIERSRoof rack

WARNINGSIf you use a roof rack, the fuelconsumption of your vehicle will behigher and you may experience

different driving characteristics.Read and follow the manufacturer ’s

instructions when you are fitting aroof rack.

CAUTIONDo not exceed the maximumpermissible roof load of 50kilogrammes (110 pounds) (including

the roof rack).

Check the security of the roof rack and

tighten its fittings as follows:• before starting• after driving 50 kilometres (30 miles)• at 1 000 kilometres (600 miles)

intervals or less, depending on roadsurface.

To reduce fuel consumption, cross railsshould be removed when not in use.

112

Load Carrying



TOWING A TRAILER

WARNINGS

Do not exceed 100 km/h (62 mph).

The rear tyre pressures must beincreased by 0.2 bar (3 psi) abovespecification. See Technical

Specifications (page 154).Do not exceed the maximum grosstrain weight stated on the vehicleidentification plate. See Vehicle

Identification Plate (page 158).

ECOnetic vehicles are not approvedfor trailer towing.

CAUTIONSDo not exceed the maximumpermissible nose weight, i.e. verticalweight on the tow ball, of 50

kilogrammes (110 pounds).The electrical system is not suitablefor towing trailers with more than onerear fog lamp.

Note: Not all vehicles are suitable or approved to have tow bars fitted. Checkwith your dealer first.

Place loads as low and central to theaxle(s) of the trailer as possible. If you aretowing with an unladen vehicle, the loadin the trailer should be placed toward thenose, within the maximum nose load, as

this gives the best stability.The stability of the vehicle to trailercombination is very much dependant onthe quality of the trailer.In high altitude regions above 1 000 metres(3 281 feet), the stipulated maximumpermitted gross train weight must bereduced by 10% for every additional 1 000metres (3 281 feet).

Steep gradients

WARNING

The overrun brake on a trailer is notcontrolled by ABS.

Change down a gear before you reach asteep downhill gradient.

TOW BALL

WARNINGSWhen not in use, always transportthe tow ball arm securely fastenedin the luggage compartment.Take special care when fitting thetow ball arm as the safety of thevehicle and the trailer depends on

this.Do not use any tools for mounting ordismounting the tow ball arm. Do notmodify the trailer coupling. Do not

disassemble or repair the tow ball arm.

A 13-pin trailer socket and the tow ball armseat are provided underneath the rearbumper. Turn the trailer socket downthrough 90 degrees until it engages in theend position.

113

Towing



Unlocking the tow ball armmechanism

1. Remove the protecting cap ( 1). Insertthe key and turn it clockwise to unlock(2 ).

2. Hold the tow ball arm. Pull thehandwheel out and turn it clockwiseuntil it clicks ( 3 ).

3. The red mark on the handwheel mustalign with the green mark on the towball.

4. Release the handwheel. The tow ballarm is unlocked.

Inserting the tow ball arm

WARNING

The tow ball arm may only beinserted when completely unlocked.

1. Pull out the plug.2. Insert the tow ball arm vertically and

press it upwards until it engages ( 1).Do not hold your hand near thehandwheel.

3. The green mark on the handwheelmust align with the green mark on the

tow ball.4. To lock, turn the key anti-clockwise andremove the key ( 2 ).

5. Pull the protecting cap from the keybow and press it onto the lock.

114

Towing



Driving with a trailer

WARNINGIf any of the below conditions cannotbe met, do not use the tow bar andhave it checked by a properly trained

technician.

Before starting your journey, make surethat the tow ball arm is properly locked.Check that:• the green marks are aligned• the handwheel ( A) is correctly fitted

to the tow ball arm• you have removed the key ( B)• the tow ball arm is securely positioned.

It must not move when jerked.

Removing the tow ball arm

1. Unhitch the trailer.2. Remove the protecting cap. Press the

cap into the key bow. Insert the key andunlock ( 1).

3. Hold the tow ball arm. Pull thehandwheel out, turn it clockwiseagainst the stop ( 2 ) and remove thetow ball arm ( 3 ).

4. Release the handwheel.When unlocked in this way, the tow ballarm can be reinserted at any time.

115

Towing



FUSE BOX LOCATIONS

Engine compartment fuse box

Passenger compartment fuse boxThis fuse box is located behind the glovebox. Open the glove box and empty thecontents. Press the sides inwards andswivel the glove box downwards.

CHANGING A FUSE

WARNINGS

Do not modify the electrical systemof your vehicle in any way. Haverepairs to the electrical system and

the replacement of relays and high currentfuses carried out by properly trainedtechnicians.

Switch the ignition and all electricalequipment off before touching orattempting to change a fuse.

CAUTIONFit a replacement fuse with the samerating as the one you have removed.

Note: You can identify a blown fuse by a break in the filament.

Note: All fuses, except high current fuses, are a push fit.

119

Fuses



Circuits protectedAmpere ratingFuse

Body control module306

Passenger compartment fuse box supply (ignition)607Glow plugs608

Heated windscreen609

Not used-10

Starter relay3011

Main beam left-hand relay1012

Main beam right-hand relay1013

Dipped beam left-hand relay1014

Dipped beam right-hand relay1015

Powertrain control module, high and low cooling fan1516

Heated oxygen (HEGO) sensors (Petrol engines)1517

Power supply module (Diesel engines)2017

FN (Automatic) transmission1018

Not used-19Not used-20

Not used-21

Lighting control battery supply1522

Front fog lamps1523

Direction indicators1524

Daytime running lamps1025

Electric exterior mirrors switch, electric foldingmirrors, power window (driver's door)7.526

Powertrain control module7.527

ABS module, ESP2028

Air conditioning clutch1029

Not used-30

121

Fuses




Not used-31

Horn, battery saver, keyless vehicle module2032Heated rear window2033

Fuel pump relay, diesel fuel heater2034

Not used-35

Not used-36

Not used-37

Not used-38

Not used-39

Not used-40

Circuits switchedRelay

Cooling system fanR1

Glow plugs (DV4 Stage 4 only), Heated windscreenR2

Powertrain control moduleR3Main beamR4

Dipped beamR5

Daytime running lampsR6

Engine cooling fanR7

StarterR8

Air conditioning clutchR9

Front fog lampsR10

Fuel pump, fuel heaterR11

Reverse lampR12

Heater blowerR13

122

Fuses




Powertrain control module, gear selector lever, fuelpump,7.514

Audio system, instrument cluster7.515

Heated exterior mirror7.516

Ignition switch1517

Cigar lighter, front power point2018

Data link connector1519

Trailer module2020

Audio system, Navigation, Bluetooth1521Instrument cluster7.522

Multi functional display, clock, internal scanner,heating ventilating, air conditioning panel7.523

Not used-24

Power windows (front)3025

Heated windscreen, left-hand side3026

Heated windscreen, right-hand side3027

Circuits switchedRelay

IgnitionR1

124

Fuses




Parking aid (vehicles with front parking aid)108

Not used-9Heated seats7.510

Not used-11

Airbag module1012

Ignition, electric power assisted steering, instrumentcluster, passive anti theft system, ABS1013

Powertrain control module, gear selector lever, fuelpump,7.514

Audio system, instrument cluster7.515

Heated exterior mirror7.516

Ignition switch1517

Cigar lighter, Front power point2018

Data link connector1519

Trailer module2020

Audio system, Navigation, Bluetooth1521Instrument cluster7.522

Multi functional display, clock, internal scanner,Heating Ventilating and Air Conditioning panel7.523

Not used-24

Power windows (front)3025

Heated windscreen, left-hand side3026

Heated windscreen, right-hand side3027Voltage Quality Module3028

Not used-29

Cigar lighter, Front power point2030

Power windows (rear)3031

Not used-32

126

Fuses



TOWING POINTS

Front towing eye

Space is provided in the spare wheel well.The towing eye must always be carried inthe vehicle.Prise off the cover and install the towingeye.

CAUTIONThe screw-in towing eye has aleft-hand thread . Turn itanti-clockwise to install it. Make sure

that the towing eye is fully tightened.

Rear towing hook

Prise off the cover.Note: On vehicles with a tow bar , use thetow bar to tow a vehicle.

TOWING THE VEHICLE ONFOUR WHEELS

All vehiclesWARNINGS

Switch the ignition on when yourvehicle is being towed. The steeringlock will engage and the direction

indicators and brake lamps will not workif you do not.

The brake and steering assistancewill not operate unless the engine isrunning. Press the brake pedal harder

and allow for increased stopping distancesand heavier steering.

CAUTIONSToo much tension in the tow ropecould cause damage to your vehicleor the vehicle that is towing.Do not use a rigid tow bar on the fronttowing eye.

Select neutral when your vehicle isbeing towed.

Drive off slowly and smoothly withoutjerking the vehicle that is towing.

Vehicles with automatictransmission

CAUTIONSIf a speed of 20 km/h (12 mph) and a

distance of 20 kilometres (12 miles)is to be exceeded the drive wheelsmust be lifted clear of the ground.

It is recommended not to tow with thedrive wheels on the ground. However,if it is required to move the vehicle

from a dangerous location, do not tow yourvehicle faster than 20 km/h (12 mph) orfurther than 20 kilometres (12 miles).

129

Vehicle recovery



CAUTIONSDo not tow your vehicle backwards.

In the event of a mechanical failure ofthe transmission the drive wheelsmust be lifted clear of the ground.Do not tow your vehicle if the ambienttemperature is below 0ºC (32ºF).

130

Vehicle recovery



OPENING AND CLOSING THEBONNET

Opening the bonnet

For item location: See At a Glance (page10).

Raise the bonnet slightly and move thecatch towards the left-hand side of thevehicle.

Open the bonnet and support it with thestrut.

Closing the bonnet

WARNINGMake sure that the bonnet is closedproperly.

Lower the bonnet and allow it to drop fromunder its own weight for the last 20 – 30centimetres (8 - 11 inches).

132

Maintenance



UNDER BONNET OVERVIEW - 1.25L DURATEC-16V (SIGMA)/1.4LDURATEC-16V (SIGMA)/1.6L DURATEC-16V TI-VCT (SIGMA)

Engine coolant reservoir *: See Engine Coolant Check (page 137).A

Brake and clutch fluid reservoir (right-hand drive) *: See Brake and ClutchFluid Check (page 138).

B

Engine oil filler cap *: See Engine Oil Check (page 137).C

Battery: See Vehicle battery (page 143).DBrake and clutch fluid reservoir (left-hand drive) *: See Brake and Clutch FluidCheck (page 138).

E

Engine compartment fuse box. See Fuses (page 119).FWindscreen and rear window washer fluid reservoir: See Washer Fluid Check(page 138).

G

133

Maintenance



Air cleaner: No maintenance necessary.HEngine oil dipstick *: See Engine Oil Check (page 137).I

*

The filler caps and the engine oil dipstick are coloured for easy identification.

UNDER BONNET OVERVIEW - 1.4L DURATORQ-TDCI (DV) DIESEL

Engine coolant reservoir *: See Engine Coolant Check (page 137).A

Brake and clutch fluid reservoir (right-hand drive) *: See Brake and ClutchFluid Check (page 138).

B

Engine oil filler cap *: See Engine Oil Check (page 137).C

Battery: See Vehicle battery (page 143).D

134

Maintenance



Type 2

MINAMAXB

ENGINE OIL CHECK

CAUTIONDo not use oil additives or otherengine treatments. Under certainconditions, they could damage the

engine.

Note: The oil consumption of new engines reaches its normal level after approximately 5000 kilometres (3000 miles).

Checking the oil level

CAUTIONMake sure that the level is betweenthe MIN and the MAX marks.

Note: Check the level before starting theengine.

Note: Make sure that your vehicle is on level ground.

Note: Oil expands when it is hot. The level may therefore extend a few millimetres beyond the MAX mark.

Remove the dipstick and wipe it with aclean, lint free cloth. Replace the dipstickand remove it again to check the oil level.

If the level is at the MIN mark, top upimmediately.

Topping up

WARNINGSOnly top up when the engine is cold.If the engine is hot, wait 10 minutesfor the engine to cool down.Do not remove the filler cap whenthe engine is running.

Remove the filler cap.

WARNINGDo not top up further than the MAXmark.

Note: Soak up any spillage with an absorbent cloth immediately.

Top up with fluid that meets the Fordspecification. See TechnicalSpecifications (page 139).Replace the filler cap. Turn it until you feela strong resistance.

ENGINE COOLANT CHECK

Checking the coolant level

WARNINGDo not allow the fluid to touch yourskin or eyes. If this happens, rinse theaffected areas immediately with

plenty of water and contact your doctor.

CAUTIONMake sure that the level is betweenthe MIN and the MAX marks.

Note: Coolant expands when it is hot. Thelevel may therefore extend beyond the MAX mark.

137

Maintenance



If the level is at the MIN mark, top upimmediately.

Topping up

WARNINGSOnly top up when the engine is cold.If the engine is hot, wait 10 minutesfor the engine to cool down.Do not remove the filler cap whenthe engine is running.

Do not remove the filler cap whenthe engine is hot. Wait for the engineto cool down.Undiluted coolant is flammable andmay ignite if spilt on a hot exhaust.

CAUTIONSIn an emergency, you can add justwater to the cooling system to reacha vehicle service station. Have the

system checked by a properly trainedtechnician as soon as possible.

Prolonged use of incorrect dilution ofthe coolant can cause engine damagefrom corrosion, overheating or

freezing.

Unscrew the cap slowly . Any pressure willescape slowly as you unscrew the cap.

CAUTIONDo not top up further than the MAXmark.

Top up with a 50/50 mixture of coolantand water using fluid that meets the Fordspecification. See TechnicalSpecifications (page 139).

WASHER FLUID CHECK

Note: The front and rear washer systems are supplied from the same reservoir.

When topping up, use a mixture of washerfluid and water to help prevent freezing incold weather and improve the cleaningcapability. We recommend that you useonly high quality washer fluid.For information on fluid dilution, refer tothe product instructions.

BRAKE AND CLUTCH FLUIDCHECK

WARNINGSUse of any fluid other than therecommended brake fluid mayreduce brake efficiency and not meet

Ford's performance standards.Do not allow the fluid to touch yourskin or eyes. If this happens, rinse theaffected areas immediately with

plenty of water and contact your doctor.If the level is at the MIN mark, havethe system checked by a properlytrained technician as soon as

possible.

Note: Keep brake fluid clean and dry.Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure.

Note: The brake and the clutch systems are supplied from the same reservoir.

Top up with fluid that meets the Fordspecification. See TechnicalSpecifications (page 139).

138

Maintenance



CLEANING THE EXTERIOR

WARNING

If you use a car wash with a waxingcycle, make sure that you remove thewax from the windscreen.

CAUTIONSPrior to using a car wash facility checkthe suitability of it for your vehicle.Some car wash installations usewater at high pressure. This coulddamage certain parts of your vehicle.Remove the aerial before using anautomatic car wash.Switch the heater blower off toprevent contamination of the fresh airfilter.

We recommend that you wash your vehiclewith a sponge and lukewarm watercontaining a car shampoo.

Cleaning the headlampsCAUTIONS

Do not scrape the headlamp lensesor use abrasives, alcoholic solvents orchemical solvents to clean them.Do not wipe the headlamps whenthey are dry.

Cleaning the rear window

CAUTIONDo not scrape the inside of the rearwindow or use abrasives or chemicalsolvents to clean it.

Use a clean, lint free cloth or a dampchamois leather to clean the inside of therear window.

Cleaning the chrome trim

CAUTION

Do not use abrasives or chemicalsolvents. Use soapy water.

Cleaning the alloy wheels

Note: Do not apply a cleaning chemical towarm or hot wheel rims and covers.

Note: Industrial-strength (heavy-duty)cleaners, or cleaning chemicals, incombination with brush agitation to remove brake dust and dirt, could wear away the

clear coat finish over a period time.Note: Do not use hydrofluoric acid-based or high caustic-based wheel cleaners, steelwool, fuels or strong household detergent.

Note: If you intend parking your vehicle for an extended period after cleaning thewheels with a wheel cleaner, drive your vehicle for a few minutes before doing so.This will reduce the risk of increased corrosion of the brake discs, brake pads and

linings.Note: Some automatic car washes may cause damage to the finish on your wheel rims and covers.

Alloy wheels and wheel covers are coatedwith a clear coat paint finish. To maintaintheir condition we recommend that you:• Clean them weekly with the

recommended wheel and tyre cleaner.• Use a sponge to remove heavy

deposits of dirt and brake dustaccumulation.• Rinse them thoroughly with a

pressurised stream of water when youhave completed the cleaning process.

We recommend that you use Ford servicewheel cleaner. Make sure that you readand follow the manufacturer ’s instructions.

141

Vehicle Care



GENERAL INFORMATION

CAUTIONS

Use only approved wheel and tyresizes. Using other sizes could damagethe vehicle and will make the National

Type Approval invalid.If you change the diameter of the tyresfrom that fitted at the factory, thespeedometer may not display the

correct speed. Take the vehicle to yourdealer to have the engine managementsystem reprogrammed.

If you intend to change the size of thewheels from that fitted at the factory,check the suitability with your dealer.

Note: Check your tyre pressures regularly to optimise fuel economy.

A decal with tyre pressure data is locatedin the left-hand door opening at theB-pillar.Check and set the tyre pressure at the

ambient temperature in which you areintending to drive the vehicle and when thetyres are cold.

CHANGING A ROAD WHEEL

Locking wheel nutsYou can obtain a replacement lockingwheel nut key and replacement lockingwheel nuts from your dealer using the

reference number certificate.Vehicles with a temporary sparewheel

WARNINGSIf the spare wheel differs from theother fitted wheels, these rules mustbe followed:

WARNINGSDo not exceed 80 km/h (50 mph).

Drive the shortest possible distances.

Do not fit more than one spare wheelon your vehicle at any one time.

Note: Your vehicle may exhibit someunusual driving characteristics.

Vehicle jack

WARNINGSThe vehicle jack supplied with yourvehicle should only be used whenchanging a wheel in emergency

situations.Before using the vehicle jack, checkthat it is not damaged or deformedand that the thread is lubricated and

free from foreign matter.Never place anything between the

jack and the ground, or the jack andthe vehicle.

Note: Vehicles with a tyre repair kit are notequipped with a vehicle jack or a wheel brace.

It is recommended to use a workshop typehydraulic jack for changing betweensummer and winter tyres.Note: Use a jack with a minimum lifting

capacity of one tonne (one ton) and a lifting plate with a minimum diameter of 80 millimetres (3.1 inches).

Your vehicle jack, wheel brace, screw-intowing eye and wheel trim remover arelocated in the spare wheel well.

145

Wheels and Tyres



Emergency use onlyAMaintenanceB

Indentations in the sills A show thelocation of the jacking points.

Vehicles with side skirts

Assembling the wheel brace

Type one

WARNINGWhen returning the wheel braceextension to its original position, takecare not to get your fingers caught.

Note: Make sure that the wheel brace is

fully extended.

Extend the wheel brace.

Type two

CAUTIONThe screw-in towing eye has aleft-hand thread . Turn itanti-clockwise to install it. Make sure

that the towing eye is fully tightened.

147

Wheels and Tyres



Insert the screw-in towing eye into thewheel brace.

Removing the wheel trim

Type one

Insert the flat end of the wheel bracebetween the rim and the trim and carefullyremove the trim.

Type two

1. Insert the wheel trim remover.2. Remove the wheel trim.Note: Make sure that you pull the wheeltrim remover at right angles to the trim.

Removing a road wheel

WARNINGSPark your vehicle in such a positionthat neither the traffic nor you arehindered or endangered.Set up a warning triangle.

WARNINGSMake sure that the vehicle is on firm,level ground with the wheels pointing

straight ahead.Switch off the ignition and apply theparking brake.

If your vehicle has a manualtransmission, select first or reversegear. If it has an automatic

transmission, select park.Have the passengers leave thevehicle.

Secure the diagonally oppositewheel with an appropriate block orwheel chock.Make sure that the arrows ondirectional tyres point in the directionof rotation when the vehicle is

moving forwards. If you have to fit a sparewheel with the arrows pointing in theopposite direction, have the tyre refittedin the correct direction by a properlytrained technician.

Do not work underneath the vehiclewhen it is supported only by a jack.

Make sure the jack base is flat on theground and vertically below thejacking point.

CAUTIONDo not lay alloy wheels face down onthe ground, this will damage the paint.

Note: The spare wheel is located under thefloor cover in the luggage compartment.

148

Wheels and Tyres



1. Install the locking wheel nut key.2. Slacken the wheel nuts.

3. Install the jack to the flange.4. Extend the jack until the base of the

jack is flat on the ground, verticallybelow the jacking point.

5. Jack up the vehicle until the tyre is clearof the ground.

6. Remove the wheel nuts and the wheel.Installing a road wheel

WARNINGSUse only approved wheel and tyresizes. Using other sizes coulddamage the vehicle and will make

the National Type Approval invalid. SeeTechnical Specifications (page 154).

Do not fit run flat tyres on vehiclesthat were not originally fitted withthem. Please contact your dealer for

more details regarding compatibility.

CAUTIONDo not install alloy wheels usingwheel nuts designed for use with steelwheels.

Note: The wheel nuts of alloy wheels and spoked steel wheels can also be used for the steel spare wheel for a short time(maximum two weeks).

Note: Make sure the wheel and hub contact surfaces are free from foreign matter.

Note: Make sure that the cones on thewheel nuts are against the wheel.

1. Install the wheel.

149

Wheels and Tyres



LabelASealant bottleBSealant bottle hoseCBottle holderDPressure gaugeEPower plug with cableF

Compressor switchGRepair kit hoseHPressure relief valveI

1. Remove the tyre repair kit from thewrapping.

2. Peel off the label A showing themaximum permissible speed of80 km/h (50 mph) from the sealantbottle and attach it to the instrumentpanel in the driver ’s field of view. Makesure the label does not obscureanything important.

3. Take the hose H with the pressurerelieve valve I and the power plug withcable F out of the kit.

4. Connect the hose H with the pressurerelieve valve I to the sealant bottle B .

5. Engage the sealant bottle B into thebottle holder D.

6. Remove the valve cap from thedamaged tyre.

7. Screw the sealant bottle hose C firmlyonto the valve of the damaged tyre.

8. Make sure that the compressor switchG is in position 0 .

9. Insert the power plug F into the cigarlighter socket or auxiliary power socket.See Cigar Lighter (page 86).

10. Start the engine.11. Move the compressor switch G toposition 1.

12. Inflate the tyre for no longer than 10minutes to an inflation pressure ofminimum 1.8 bar (26 psi) and amaximum of 3.5 bar (51 psi). Movethe compressor switch G to position0 and check the current tyre pressurewith pressure gauge E .

Note: If a tyre pressure of 1.8 bar (26 psi)is not reached do not continue.

Note: When pumping in the sealant throughthe tyre valve, the pressure may rise up to6 bar (87 psi) but will drop again after about 30 seconds.

13. Remove the power plug F from thecigar lighter socket or auxiliary powersocket.

152

Wheels and Tyres



To make sure the front and rear tyres ofyour vehicle wear evenly and last longer,we recommend that you swap the tyresfrom front to rear and vice versa at regularintervals of between 5000 and 10000kilometres (3000 and 6000 miles).

CAUTIONDo not scrub the sidewalls of the tyreswhen you are parking.

If you have to mount a kerb, do so slowlyand approach it with the wheels atright-angles to the kerb.

Examine the tyres regularly for cuts, foreignobjects and uneven wear of the tread.Uneven wear could mean that the wheelalignment is outside specification.Check the tyre pressures (including thespare) when cold, every two weeks.

USING WINTER TYRES

CAUTION

Make sure that you use the correctwheel nuts for the type of wheel thewinter tyres are fitted to.

If winter tyres are used, make sure that thetyre pressures are correct. See TechnicalSpecifications (page 154).

USING SNOW CHAINS

WARNINGS

Do not exceed 50 km/h (30 mph).

Do not use snow chains on snow-freeroads.

Only fit snow chains to specifiedtyres. See TechnicalSpecifications (page 154).

CAUTION

If your vehicle is fitted with wheeltrims, remove them before fittingsnow chains.

Note: The ABS will continue to operate normally.

Only use small link snow chains.Only use snow chains on the front wheels.

Vehicles with stability control

(ESP)Vehicles with stability control (ESP) mayexhibit some unusual drivingcharacteristics which can be reduced byswitching traction control off. See UsingStability Control (page 105).

TECHNICAL SPECIFICATIONS

Wheel nut torque

Nm (Ib-ft)Wheel type

110 (81)All

154

Wheels and Tyres



Tyre pressures (cold tyres)

Up to 80 km/h (50 mph)

Full loadNormal load

Tyre sizeVariant RearFrontRearFront

bar (lbf/in²)

bar (lbf/in²)

bar (lbf/in²)

bar (lbf/in²)

3 (44)3 (44)3 (44)3 (44)175/65 R14Temporary sparewheel when itdiffers from theother fitted wheels

Up to 160 km/h (100mph)



bar (lbf/in²)

bar (lbf/in²)

bar (lbf/in²)

bar (lbf/in²)

3.2 (46)2.4 (35)1.8 (26)2.1 (31)175/65 R14 *All engines except1.6L Duratorq-TDCi

(DV) Diesel

3.2 (46)2.4 (35)1.8 (26)2.1 (31)195/50 R15All engines except1.6L Duratorq-TDCi(DV) Diesel




3.2 (46)2.4 (35)1.8 (26)2.3 (33)175/65 R14 *1.6L Duratorq-TDCi(DV) Diesel

3.2 (46)2.4 (35)1.8 (26)2.3 (33)195/50 R151.6L Duratorq-TDCi(DV) Diesel

155

Wheels and Tyres





bar (lbf/in²)

bar (lbf/in²)

bar (lbf/in²)

bar (lbf/in²)




*

Only fit snow chains to specified tyres.

Continuous speed in excess of 160 km/h (100mph)



bar (lbf/in²)

bar (lbf/in²)

bar (lbf/in²)

bar (lbf/in²)

3.2 (46)2.6 (38)2 (29)2.1 (31)175/65 R14 *

All engines except1.6L Duratorq-TDCi(DV) Diesel

3.2 (46)2.6 (38)2 (29)2.1 (31)195/50 R15All engines except1.6L Duratorq-TDCi(DV) Diesel




3.2 (46)2.6 (38)2 (29)2.3 (33)175/65 R14 *1.6L Duratorq-TDCi(DV) Diesel

156

Wheels and Tyres





bar (lbf/in²)

bar (lbf/in²)

bar (lbf/in²)

bar (lbf/in²)

3.2 (46)2.6 (38)2 (29)2.3 (33)195/50 R151.6L Duratorq-TDCi(DV) Diesel



2.6 (38)2.6 (38)2.1 (31)2.1 (31)195/60 R151.6L Duratorq-TDCi(DV) Diesel*Only fit snow chains to specified tyres.

157

Wheels and Tyres



VEHICLE IDENTIFICATIONPLATE

Note: The vehicle identification platedesign may vary to that shown.

Note: The information shown on the vehicleidentification plate is dependant upon market requirements.

Vehicle identification numberA

Gross vehicle weightBGross train weightCMaximum front axle weightDMaximum rear axle weightE

The vehicle identification number andmaximum weights are shown on a platelocated at the bottom of the right-handside door aperture.

VEHICLE IDENTIFICATIONNUMBER

The vehicle identification number isstamped into the floor panel on theright-hand side, beside the front seat. It isalso shown on the left-hand side of theinstrument panel.

158

Vehicle identification



TECHNICAL SPECIFICATIONS

Dimension in mm (inches)Dimension description

3950 - 3958 (155.5 - 155.8)Maximum length

1973 (77.7)Overall width including exterior mirrors

1433 - 1481 (56.4 - 58.3)Overall height - EC kerb weight

2489 (98)Wheelbase

1473 - 1493 (58 - 58.8)Front track

1460 - 1480 (57.5 - 58.3)Rear track

159

Capacities and Specifications



Towing equipment dimensions

Dimension in mm (inches)Dimension descriptionItem

124 (4.9)Bumper – end of tow ballA

7 (0.3)Attachment point – centre of tow ballB

761 (29.9)Wheel centre – centre of tow ballC

512 (20.2)Centre of tow ball – side memberD

160

Capacities and Specifications



IMPORTANT AUDIOINFORMATION

WARNINGSDue to technical incompatibility,recordable (CD-R) and rewritable(CD-RW) discs may not function

correctly.These CD radio units will playcompact discs that conform to theInternational Red Book standard

audio specification. Copy protected CDsfrom some manufacturers do not conformto this standard and playback cannot beguaranteed.

Dual format, dual sided discs (DVDPlus, CD-DVD format), adopted bythe music industry, are thicker than

normal CDs and consequently playbackcannot be guaranteed, and jamming couldoccur. Irregular shaped CDs and CDs witha scratch protection film or self adhesivelabels attached should not be used.Warranty claims, where this type of disc is

found to be inside an audio unit returnedfor repair, will not be accepted.All CD units are designed to playcommercially pressed 12 cm audiocompact discs only.The audio unit may be damaged ifunsuitable items like credit cards orcoins are pushed inside the CD

aperture.

Audio unit labels

Disc labels

Audio CD

MP3

162

Audio introduction



Note: Units have an integrated multifunction display situated above the CD aperture. This shows important information regarding control of your audio unit. Additionally, there are various icons placed around the display screen which light upwhen a function is active (for example CD,Radio or Aux.)

Type 1

CD eject. See Compact Disc Player (page 175).ANavigation arrows.BCD aperture. See Compact Disc Player (page 175).COK.DInformation.ETraffic announcement. See Traffic information control (page 171).F

163

Audio unit overview



Station presets. See Station preset buttons (page 171).GSeek up. CD track selection. See Station tuning control (page 170). See Trackselection (page 175).

H

On/off and volume control.ISeek down. CD track selection. See Station tuning control (page 170). SeeTrack selection (page 175).

J

Menu select.KSound button. See Sound button (page 170).LAuxiliary select. See Auxiliary Input Socket (page 87). See Auxiliary input(AUX IN) socket (page 179).

M

Radio and waveband select. See Audio unit operation (page 170).N

CD select. See Compact Disc Player (page 175).O

Type 2

Descriptions for function buttons1-4

A

164

Audio unit overview



On/off and volume control.LSeek down. CD track selection. See Station tuning control (page 170). SeeTrack selection (page 175).

M

Function 2.NFunction 1.OMenu select.PPhone menu. See Telephone (page 181).QAuxiliary, USB and iPod select. See Auxiliary Input Socket (page 87). SeeAuxiliary input (AUX IN) socket (page 179). See Connectivity (page 201).

R

Radio and waveband select. See Audio unit operation (page 170).SCD select. See Compact Disc Player (page 175).T

Function buttons 1 to 4 are contextdependent, and change according to thecurrent unit mode. Descriptions for thefunctions are shown at the bottom of thescreen display.

Type 3

Descriptions for function buttons1-4

A

166

Audio unit overview



On/off control.ADisplay select.BTelephone keypad and station presets. See Using the telephone (page 182).See Station preset buttons (page 171).

C

CD aperture. See Compact Disc Player (page 175).DNavigation arrows.E

DSP select. See Digital signal processing (DSP) (page 173).FCD eject. See Compact Disc Player (page 175).GInformation.HClock.ISeek up. CD track selection. End call. See Station tuning control (page 170).See Track selection (page 175). See Using the telephone (page 182).

J

Mute.K

167

Audio unit overview



ON/OFF CONTROL

Press the on/off control. This will alsooperate the unit for up to one hour with theignition turned off.The radio will switch off automaticallyafter one hour.

SOUND BUTTON

This will allow you to adjust the soundsettings (for example bass and treble).1. Press the sound button.

2. Use the up and down arrow buttons toselect the required setting.

3. Use the left and right arrow buttons tomake the necessary adjustment. Thedisplay indicates the level selected.

4. Press the OK button to confirm thenew settings.

WAVEBAND BUTTON

Press the RADIO button to select from thewavebands available.The selector can also be used to return toradio reception when you have beenlistening to another source.Alternatively, press the left arrow buttonto display the available wavebands. Scrollto the required waveband and press OK.

STATION TUNING CONTROLDAB service linking

Note: The DAB service linking is as per default off.

Note: Service linking allowscross-referencing to other correspondingfrequencies of the same station, for exampleFM and other DAB ensembles.

Note: The system will automatically change to another corresponding station if the current one becomes unavailable, for example when leaving the coverage area.

Switching DAB service linking on and off.See General Information (page 64).

Seek tuningSelect a waveband and briefly press oneof the seek buttons. The unit will stop atthe first station it finds in the direction youhave chosen.

Manual tuning

Type 1

1. Press the MENU button.2. Select RADIO mode and then MANUAL

TUNE.3. Use the left and right arrow buttons to

tune down or up the waveband in smallincrements or press and hold toincrement quickly, until you find astation you want to listen to.

4. Press OK to continue listening to astation.

Type 2 and 3

1. Press function button 2.2. Use the left and right arrow buttons to

tune down or up the waveband in smallincrements or press and hold toincrement quickly, until you find astation you want to listen to.


Scan tuningScan allows you to listen to a few secondsof each station detected.

Type 1

1. Press the MENU button.

170

Audio unit operation



2. Select RADIO mode and then SCAN.3. Use the seek buttons to scan up or

down the selected waveband.


Type 2 and 3

1. Press function button 3.2. Use the seek buttons to scan up or

down the selected waveband.3. Press function button 3 again or OK to

continue listening to a station.

STATION PRESET BUTTONS

This feature allows you to store yourfavourite stations so that they can berecalled by selecting the appropriatewaveband and pressing one of the presetbuttons.1. Select a waveband.2. Tune to the station required.3. Press and hold one of the preset

buttons. A progress bar and messagewill appear. When the progress barcompletes the station has been stored.The audio unit will also mutemomentarily as confirmation.

This can be repeated on each wavebandand for each preset button.Note: When you drive to another part of thecountry, FM and DAB stations that broadcast on alternative frequencies, and are stored on preset buttons, may beupdated with the correct frequency and station name for that area.

AUTOSTORE CONTROL

Note: This will store up to a maximum of the 10 strongest signals available, either from the AM or the FM waveband, and overwrite the previously stored stations. Itcan also be used to store stations manually in the same way as other wavebands.

Note: On type 3 you must select either FM AST or AM AST to use this function.• Press and hold function button 1 or the

RADIO button.• When the search is complete, sound is

restored and the strongest signals arestored on the Autostore presets.

TRAFFIC INFORMATIONCONTROL

Many stations that broadcast on the FMwaveband have a TP code to signify thatthey carry traffic programme information.

Activating traffic announcementsBefore you can receive trafficannouncements, you must press either theTA or TRAFFIC button. A ‘TA’ display willappear to show the feature is switched on.If you are already tuned to a station thatbroadcasts traffic information, ‘TP ’ willalso be displayed. Otherwise the unit willsearch for a traffic programme.When traffic information is broadcast, itwill automatically interrupt normal radioor CD playback and ‘Traffic announcement(TA) ’ will appear in the display.If a non-traffic station is selected orrecalled using a preset button, the audiounit will remain on that station unless TAor TRAFFIC is turned off, then on again.Note: If TA is on and you select a preset or manual tune to a non TA station no traffic announcement will be heard.

171




Note: When you are listening to a non TA station and turn TA off and on again a TP seek will occur.

Traffic announcement volumeTraffic announcements interrupt normalbroadcasts at a preset minimum level thatis usually louder than normal listeningvolumes.To adjust the preset volume:• Use the volume control to make the

necessary adjustment during anincoming TA broadcast. The displaywill show the level selected.

Ending traffic announcementsThe audio unit will return to normaloperation at the end of each trafficannouncement. To end the announcementprematurely, press TA or TRAFFIC duringthe announcement.Note: If you press TA or TRAFFIC at any other time it will switch all announcementsoff.

172




It will restore radio reception when it findsone or, if one is not found, the unit willreturn to the original stored frequency.

When selected,‘

AF’

will be shown in thedisplay.1. Press the MENU button.2. Select AUDIO or AUDIO MENU.3. Scroll to ALTERNAT FREQ. or

ALTERNATIVE FREQ. and turn on or offwith the OK button.

4. Press the MENU button to return.

REGIONAL MODE (REG)Regional mode (REG) controls thebehaviour of AF switching betweenregionally related networks of a parentbroadcaster. A broadcaster may run a fairlylarge network across a large part of thecountry. At various times of the day thislarge network may be broken down into anumber of smaller regional networks,typically centred on major towns or cities.When the network is not split into regionalvariants, the whole network caries thesame programming.Regional mode ON: This prevents 'random'AF switches when neighbouring regionalnetworks are not carrying the sameprogramming.Regional mode OFF: This allows a largercoverage area if neighbouring regionalnetworks are carrying the sameprogramming, but can cause 'random' AFswitches if they are not.1. Press the MENU button.2. Select AUDIO or AUDIO SETTINGS.3. Scroll to RDS REGIONAL and turn on

or off with the OK button.4. Press the MENU button to return.

174

Audio unit menus



When an MP3 CD is playing, optionsinclude REPEAT for the track, or to repeatall the tracks in the folder. Repeat pressesof function button 1 will toggle theseoptions.

COMPACT DISC TRACKSCANNING

The SCAN function allows you to previeweach track for approximately 5 seconds.

Type 1

Various scan modes are possible,according to the type of CD currentlyplaying.1. Press the MENU button and select CD

MODE.2. Select SCAN, which then enables the

function to be selected on or off.Note: When an MP3 CD is playing, optionsinclude SCAN for the CD, or just the tracksin the folder.

3. Press the OK button to stop the scanmode.

Type 2 and 31. Press function button 3.Note: When an MP3 CD is playing, optionsinclude SCAN for the CD, or just the tracksin the folder. Repeat presses of function button 3 will toggle these options.

2. Press function button 3 again to stopthe scan mode.

MP3 FILE PLAYBACK

MP3 (MPEG 1 Audio Layer-3) is a standardtechnology and format for compressingaudio data. This allows a more efficientuse of the media.

You can play MP3 files recorded onCD-ROMs, CD-Rs, and CD-RWs. The discmust be in the ISO 9660 level 1 or level 2format, or Joliet or Romeo in the expansionformat. You can also use a disc recordedin Multi Session.

ISO 9660 formatThis is the most common internationalstandard for the logical format of files andfolders on a CD-ROM.There are several specification levels. InLevel 1, file names must be in the 8.3format (no more than 8 characters in thename, no more than 3 characters in theextension “ .MP3 ” ) and in capital letters.Folder names can be no longer than 8characters. There can be no more than 8folder levels (trees). Level 2 specificationsallow file names up to 31 characters long.Each folder can have up to 8 trees.For Joliet or Romeo in the expansionformat, please consider these restrictionswhen configuring your CD writing software.

Multi sessionThis is a recording method that enablesadding of data using the Track-At-Oncemethod.Conventional CDs begin at a CD controlarea called the Lead-in and end at an areacalled Lead-out. A Multi Session CD is aCD having multiple sessions, with eachsegment from Lead-in to Lead-out

regarded as a single session.• CD-Extra: The format that records

audio (audio CD data) as tracks onsession 1, and records data as trackson session 2.

• Mixed CD: In this format, data isrecorded as track 1, and audio (audioCD data) is recorded as track 2.

176

Compact Disc Player



File formats• With formats other than ISO 9660

level 1 and level 2, folder names or filenames may not be displayed correctly.

• When naming, be sure to add the fileextension “ .MP3 ” to the file name.

• If you put the extension “ .MP3 ” to a fileother than MP3, the unit cannotrecognize the file properly and willgenerate random noise that coulddamage your speakers.

• The following discs take a longer timeto start playback.• a disc recorded with complicatedtree structure.• a disc recorded in Multi Session.• a non-finalised disc to which data

can be added.

Playing a multi session disc

When the first track of the first sessionis audio CD dataOnly audio CD data of the first session isplayed back. Non-audio CD data/MP3 fileinformation (track number, time, etc.) isdisplayed with no sound.When the first track of the first sessionis not audio CD data• If an MP3 file is in the disc, only MP3

file(s) play back and other data isskipped. (Audio CD data is notrecognised.)

• If no MP3 file is in the disc, nothing isplayed back. (Audio CD data is notrecognised.)

MP3 files playback orderThe playback order of the folders and filesis as shown.Note: A folder that does not include an MP3file is skipped.

Playback tip: To specify a desiredplayback order, before the folder or filename, input the order by number (e.g., “ 01,”“ 02 ” ), then record contents onto a disc.(The order differs depending on the writingsoftware.)

ID3 Tag Version 2The following occurs when an MP3 filecontaining ID3 tag ver.2 is played:• When skipping a portion of ID3 tag ver.2

(at the beginning of the track), soundis not output. Skip time changesdepending ID3 tag ver.2 capacity.Example: At 64 kbytes, it is about 2seconds (with RealJukebox).

• The displayed elapsed playing time

when skipping a portion of ID3 tag ver.2is inaccurate. For MP3 files of a bit rateother than 128 kbps, time is notdisplayed accurately during playback.

• When an MP3 file is created with MP3conversion software (e.g. RealJukebox- a registered trademark ofRealNetworks Inc), ID3 ver.2 willautomatically be written.

177

Compact Disc Player



AUDIO TROUBLESHOOTING

RectificationAudio unit display

General error message for CD fault conditions, such ascannot read the CD, data-CD inserted, etc. Ensure discis loaded correct way up. Clean and re-try, or replace

disc with known music disc. If error persists contact yourdealer.

PLEASE CHECK CD

General error message for CD fault conditions such aspossible mechanism fault.

CD DRIVE MALFUNCTION

Ambient temperature too hot – unit will not work untilit has cooled down.

CD DRIVE HIGH TEMP

General error message for iPod fault conditions, suchas cannot read the data. Ensure iPod is inserted

correctly. If error persists contact your dealer.

IPOD ERROR READING DEVICE

180

Audio Troubleshooting



GENERAL INFORMATION

CAUTION

Using the system with the engine offwill drain the battery.

This section describes the functions andfeatures of the Bluetooth mobile phonehands free system.The Bluetooth mobile phone part of thesystem provides interaction with the audioor navigation system and your mobilephone. It allows you to use the audio or

navigation system to make and receivecalls without having to hold your mobilephone.

Compatibility of phones

CAUTIONAs no common agreement exists,mobile phone manufacturers are ableto implement a variety of profiles in

their Bluetooth devices. Because of this,

an incompatibility can occur between thephone and hands-free system, which insome cases may significantly degrade thesystem performance. To avoid thissituation, only recommended phonesshould be used.

Please visit the website www.ford-mobile-connectivity.com for full details.

BLUETOOTH SETUP

Before you can use your telephone withyour vehicle it must be bonded to thevehicle telephone system.

Handling of phonesUp to six Bluetooth devices can be bondedto the vehicle system.

Note: If there is an ongoing call when the phone in use is selected as the new active phone, the call is transferred to the vehicle audio system.

Note: Even if connected to the car system, your phone can still be used in the usualway.

Requirements for BluetoothconnectionThe following are required before aBluetooth phone connection can be made.1. The Bluetooth feature must be

activated on the phone and on theaudio unit. Make sure the Bluetoothmenu option in the audio unit is set toON . For information on phone settings,refer to your phone user guide.

2. In the Bluetooth menu on your phone,search for Ford Audio and select it.

3. Enter the code number shown on thevehicle display using the phone keypad.If no code number is shown on thedisplay, enter the Bluetooth PIN

number 0000 using the phone keypad.Now enter the Bluetooth PIN numbershown on the vehicle display.

4. If your mobile phone asks you toauthorize the automatic connection,select YES .

Note: A phone call will be disconnected if the audio unit is switched off. If the ignition key is turned to the off position the phonecall will remain in progress.

TELEPHONE SETUP

Phonebook

Note: It may be necessary to confirm phonebook access to the Bluetooth systemvia the mobile phone.

181

Telephone



After start up access to the phonebook listcan be delayed for several minutes,depending upon the size.

Phonebook categoriesThe category is indicated as an icon:

Phone

Mobile

Home

Office

Making a phone an active phone

Note: If there is an ongoing call when the phone in use is selected as the new active phone, the call is transferred to the vehicle audio system.

When using the system for the first time,no phone is connected to the system.After switching on the ignition and theaudio unit, the Bluetooth phone must bebonded to the system. See Bluetoothsetup (page 181).After bonding a Bluetooth phone to thesystem, this becomes the active phone.For further information refer to the phonemenu.Select the phone from the active phonemenu.Turning the ignition and radio back onagain, the last active phone is picked up bythe system.Note: In some cases the Bluetoothconnection must also be confirmed on the phone.

Bond another Bluetooth phoneBond a new Bluetooth phone as describedin the requirements for a Bluetoothconnection.Phones stored in the system are accessibleby using the phone list on the audio unit.Note: A maximum of six devices may be bonded. If six Bluetooth devices have already been bonded, one of these has to be debonded in order to bond a new device.

TELEPHONE CONTROLS

Remote controlVoice and mode button

Incoming calls can be accepted by pressingthe MODE button once. Press the buttonagain to end the call.

USING THE TELEPHONE

Note: Refer to your audio guide for detailsof the controls. See Audio unit overview (page 163).

Note: You can exit the phone menu by pressing any source button CD , RADIO or AUX .

Note: When referred to, the use of theup/down arrow buttons, seek up and seekdown buttons, and the OK button can beused on either the steering wheel or the audio unit.

182

Telephone



This chapter describes the phone functionsof the audio unit.An active phone must be present.

Even if connected to the audio unit, yourphone can still be used in the usual way.

Making a call

Dialling a number using voice control

Phone numbers can be dialled using voicecontrol. See Telephone commands(page 193).

Dialling a number using the addressbook1. Press the PHONE button.2. Press the up/down arrow buttons until

PHONEBOOK is shown.3. Press the OK button.Note: You can also use the telephone keypad to select the first letter of the entry you are looking for. Press the relevant number that corresponds to the letter repeatedly until the required letter isdisplayed.

4. Press the up/down arrow buttons toselect the desired phone number.

Note: Press and hold the up/down arrow buttons to search forwards or backwardswithin the phonebook.

5. Press the OK button to dial theselected phone number.

Dialling a number using the telephonekeypad1. Press the PHONE button.2. Dial the number using the telephone

keypad on the audio unit.3. Press the OK button.

Note: If you enter an incorrect digit whilstentering a phone number, press function button 3 to erase the last digit. A long presswill erase the complete string of digits.

Ending a call

Calls can be ended by:• pressing the seek up button• pressing the OK button• pressing function button 4.

Redialling a number

1. Press the PHONE button.

2. Press the up/down arrow buttons untilCALL LISTS is displayed.

3. Press the OK button.Note: If the active phone does not provide a call out list, the last outgoing call number/entry can be redialled.

4. Press the up/down buttons to selectthe desired call list.

5. Press the OK button.

6. Press the up/down buttons to selectthe desired phone number.7. Press the OK button.

Redialling the last dialled number

1. Press the PHONE button.2. Press the up/down arrow buttons until

REDIAL is displayed.3. Press the OK button.

Receiving an incoming callAccepting an incoming call

Incoming calls can be accepted by pressingthe seek down button, or by pressing theOK button.

183

Telephone



Rejecting an incoming call

Incoming calls can be rejected by:• pressing the seek up button, or• pressing the arrow down button to

highlight REJECT and then pressingthe OK button.

Receiving a second incoming call

Note: The second incoming call function must be activated in your phone.

If there is an incoming call whilst there isan ongoing call, a beep will be heard andyou will have the option to end the activecall and to accept the incoming call.

Accepting a second incoming call

Note: The first incoming call will bedisconnected and replaced by the second incoming call.

Second incoming calls can be acceptedby pressing the seek down button on thesteering wheel or on the audio unit, or bypressing the OK button on the audio unit.

Rejecting a second incoming call

Second incoming calls can be rejected by:• pressing the seek up button, or• pressing the arrow down button to

highlight REJECT and then pressingthe OK button.

Second incoming calls can be rejected bypressing function button 4.

Muting the microphoneNote: During a call, it is possible to mutethe microphone. Whilst muted, confirmationwill appear in the display.

Press function button 1. Press the buttononce again to turn this function off.

Changing the active phone

Note: Phones must be bonded to the system before they can be made active.

Note: After bonding a phone to the system,this becomes the active phone.

1. Press the PHONE button.2. Press the up/down buttons until

SELECT PHONE is shown.3. Press the OK button.4. Scroll through the different stored

phones by using the up/down buttonsto display the bonded phones.

5. Press the OK button to select thephone which is to be the active phone.

Debonding a bonded phoneA bonded phone can be deleted from thesystem at any time, unless a phone call isin progress.1. Press the PHONE button.2. Press the up/down buttons until

SELECT PHONE is shown.3. Press the OK button.4. Press the up/down buttons to highlight

the required phone.5. Press function button 1.

184

Telephone



Track You can choose a track on your CD directly.

System answerUser saysSteps

"CD PLAYER""CD PLAYER"1

"TRACK NUMBER PLEASE""TRACK"*2

"TRACK <number>""<a number between 1 and 99>" **3

* Can be used as a shortcut.** Additionally, numbers can be spoken as up to four single digits (for example "2", "4","5" for track 245)

Shuffle all

To set random playback.


"CD PLAYER""CD PLAYER"1

"SHUFFLE ALL"2

RadioThe radio voice commands support thefunctionality of the radio and allow you totune radio stations by voice control.

Overview

The overview below shows the availablevoice commands. The following lists willgive further information about thecomplete command menu.

"RADIO"

"HELP"

"AM"

"FM"

"TUNE NAME"*

"DELETE NAME"

"DELETE DIRECTORY"

"PLAY DIRECTORY"

187

Voice control



"RADIO"

"STORE NAME"

"PLAY"* Can be used as a shortcut.

Tune frequency

This function allows you to tune your radioby voice commands.


"RADIO""RADIO"1"AM FREQUENCY PLEASE""AM"2

"FM FREQUENCY PLEASE""FM"

"TUNE <frequency>""<frequency>" *3

* The frequency may be entered in a variety of ways. Refer below for representativeexamples.

FM band: 87.5 - 108.0 in increments of 0.1• "Eighty nine point nine" (89.9)• "Ninety" (90.0)• "One hundred point five" (100.5)• "One zero one point one" (101.1)• "One zero eight" (108.0)AM/MW band: 531 - 1602 in increments of9AM/LW band: 153 - 281 in increments of 1

• "Five thirty one" (531)• "Nine hundred" (900)• "Fourteen forty" (1440)• "Fifteen zero three" (1503)• "Ten eighty" (1080)

Store name

If you have tuned a radio station, you canstore it with a name in the directory.


"RADIO""RADIO"1

"STORE NAME""STORE NAME"2"NAME PLEASE"

"REPEAT NAME PLEASE""<name>"3

"STORING NAME""<name>"4

188

Voice control




"EXTERNAL DEVICE""EXTERNAL DEVICE"1

"USB""USB"2

"TRACK NUMBER PLEASE""TRACK"3

"TRACK <number>""<a number between 1 and 99>" *4

* Additionally, numbers can be spoken as up to four single digits (for example "2", "4","5" for track 245)

External devices - iPodThese voice commands support thefunctionality of an iPod which may beconnected to the audio unit.

Overview

The overview below shows the availablevoice commands. The following lists willgive further information about thecomplete command menu in selectedexamples.

"EXTERNAL DEVICE", "IPOD"

"HELP"

"PLAY"

"TRACK"*

"PLAYLIST"**

"SHUFFLE ALL"

"SHUFFLE PLAYLIST"

"SHUFFLE OFF"

"REPEAT TRACK"

"REPEAT OFF"* Can be used as a shortcut.** Playlists activated by voice control must be assigned special filenames. See GeneralInformation (page 201).

iPod Track

You can choose a track off the all titles listof your iPod directly.

192

Voice control



"PHONE"

"HELP"

"MOBILE NAME"*

"DIAL NUMBER"*

"DIAL NAME"*

"DELETE NAME"

"DELETE DIRECTORY"

"PLAY DIRECTORY"

"STORE NAME"

"REDIAL"*

"ACCEPT CALLS"

"REJECT CALLS"

* Can be used as a shortcut.

Phone functionsDial number

Phone numbers can be dialled after givingthe name tag voice command.


"PHONE""PHONE"1

"NUMBER PLEASE""DIAL NUMBER"*2

"<phone number>"<phone number>"3CONTINUE?"

"DIALLING""DIAL"4

"<repeat last part of number>"CORRECTION"CONTINUE?"


194

Voice control



Dial name Phone numbers can be dialled after givingthe name tag voice command.


"PHONE""PHONE"1

"NAME PLEASE""DIAL NAME"*2

"DIAL <name>""<name>"3"CONFIRM YES OR NO"

"DIALLING""YES"4

"COMMAND CANCELLED""NO"


Redial

This function allows you to redial the lastdialled phone number.


"PHONE""PHONE"1

"REDIAL""REDIAL"*2 "CONFIRM YES OR NO"

"DIALLING""YES"3



Mobile name

This function allows you to access phonenumbers stored with a name tag in yourmobile phone.


"PHONE""PHONE"1

"MOBILE NAME" "<phonedependent dialogue>"

"MOBILE NAME"*2


195

Voice control



DTMF (Tone dialling)

This function transfers spoken numbersinto DTMF tones. For example, to make a

remote enquiry to your home answeringmachine or to enter a PIN number etc.

Note: DTMF can only be used during anongoing call. Operate the VOICE button and wait for the system prompt.

Can only be used with vehicles installed with a dedicated VOICE button.


"NUMBER PLEASE"1

"<numbers 1 to 9, zero, hash, star>"2

Create a phonebook

Store name

New entries can be stored with the"STORE NAME" command. This featurecan be used to dial a number by calling upthe name instead of the full phone number.


"PHONE""PHONE"1

"STORE NAME""STORE NAME"2"NAME PLEASE"

"REPEAT NAME PLEASE""<name>"3

"STORING NAME""<name>"4"<name> STORED""NUMBER PLEASE"

"<phone number>""<phone number>"5

"STORING NUMBER""STORE"6"<phone number>""NUMBER STORED"

Delete name

Stored names can also be deleted fromthe directory.

196

Voice control




"PHONE""PHONE"1

"NAME PLEASE""DELETE NAME"2

"DELETE <name>""<name>"3"CONFIRM YES OR NO"

"<name> DELETED""YES"4


Play directory

Use this function to let the system tell youall stored entries.


"PHONE""PHONE"1

"PLAY DIRECTORY""PLAY DIRECTORY"2

Delete directory

This function allows you to delete allentries in one go.


"PHONE""PHONE"1

"DELETE DIRECTORY""DELETE DIRECTORY"2"CONFIRM YES OR NO"

"DIRECTORY DELETED""YES"3


Main settings

Reject calls

Calls can be set to be automaticallyrejected using voice control.

197

Voice control




"PHONE""PHONE"1

"REJECT CALLS""REJECT CALLS"2

"ACCEPT CALLS""ACCEPT CALLS"*

* use this command to turn the reject mode off

CLIMATE CONTROLCOMMANDS

ClimateThe climate voice commands supports thefunctionality of the fan speed, temperatureand mode settings. Not all functions areavailable on all vehicles.

Overview

The overview below shows the availablevoice commands. The following lists willgive further information about thecomplete command menu in selectedexamples.

"CLIMATE"

"HELP"

"FAN"*

"DEFROSTING/DEMISTING ON" *

"DEFROSTING/DEMISTING OFF" *

"TEMPERATURE" *

"AUTO MODE" *

* Can be used as a shortcut. On vehicles fitted with an English language module the "FAN"shortcut is not available.

Fan

This function allows you to adjust the fanspeed.

198

Voice control




"TEMPERATURE <number>""<a number between 15 and 29 °C

with 0.5 increments>" or "<anumber between 59 and 84 °F>"

"TEMPERATURE MAXIMUM""MAXIMUM"


Auto mode


"CLIMATE""CLIMATE"1

"AUTO MODE""AUTO MODE"*2

* Can be used as a shortcut. Can be deactivated by selecting a different temperature orfan speed.

200

Voice control



To enable voice control for customplaylists and folders, follow the procedurebelow:•

Create folders named with thestructure "Ford<*>" where <*> is anumber 1-10. For example "Ford3"without an extension.

• Create playlists named with thestructure "Ford<*>.m3u" where <*>is a number 1-10. For example"Ford5.m3u" without any spacebetween "Ford" and the number.

Thereafter, custom folders and playlistswill be selectable with voice control. SeeAudio unit commands (page 186).iPod

To enable voice control for customplaylists, create playlists named with thestructure "Ford<*>" where <*> is anumber 1-10. For example "Ford7" withoutany space between "Ford" and thenumber.Thereafter, playlists will be selectable with

voice control. See Audio unit commands(page 186).

CONNECTING AN EXTERNALDEVICE

WARNINGMake sure the external device issecurely mounted within the vehicle,and that trailing connections do not

obstruct any of the driving controls.

External devices may be connected usingthe auxiliary input socket and the USB port.See Auxiliary Input Socket (page 87).See USB Port (page 88).

ConnectionPlug in the device, and if necessary secureit to prevent movement within the vehicle.

Connecting an iPod

For optimum convenience and audioquality, we recommend that you purchasea dedicated single connection leadavailable from your dealer.Alternatively, it is possible to connect youriPod using the standard iPod USB cableand a separate 3.5mm audio jack lead. Ifusing this method preset the iPod volume

to maximum and turn off any equalizersettings before making the connections:• Connect the headphone output of the

iPod to the AUX IN socket.• Connect the USB cable from the iPod

to the vehicle USB socket.

CONNECTING AN EXTERNALDEVICE - VEHICLES WITH:

BLUETOOTHConnecting a Bluetooth audiodevice

CAUTIONAs various standards exist,manufacturers are able to implementa variety of profiles in their Bluetooth

devices. Because of this, an incompatibilitycan occur between the Bluetooth device

and the system, which in some cases maylimit system functionality. To avoid thissituation, only recommended devicesshould be used.

Please visit the websitewww.ford-mobile-connectivity.comfor full details.

202

Connectivity



Bonding the device

To connect the device to the system followthe same procedure as for Bluetooth hands

free phones. See Bluetooth setup (page181).

Operating the device

Note: The seek buttons and file informationwill only work on certain phones and devices.

Select Bluetooth audio as the activesource.1. Select AUX .2. Press the up and down arrow buttons

to select the desired function.3. Press the OK button.Tracks can be accessed by skippingforwards and backwards using the steeringwheel controls, or directly from the audiounit controls.

Audio control

Press the seek up and down keys to skipbackwards and forwards through tracks.Press and hold the seek keys to enable fastrewind/fast forward through track content.Press the INFO button or function button4 to display the following:• Title.• Artist.• Album.• File name.

USING A USB DEVICE

Various icons are used to identify types ofaudio file, folders etc.

USB device is the active source

Folder

Playlist

Album

Artist

Filename

Track title

Information not available

OperationSelect the USB device as the audio source

by repeatedly pressing the AUX buttonuntil the USB screen appears in the display.After first connecting the USB device, thefirst track within the first folder will startto play automatically. Subsequently,following audio source switching, theposition of playback on the USB device isremembered.To browse the device contents, press theup/down arrow key or the OK button once.

203

Connectivity



The display will show the trackinformation, together with other importantinformation described below:•

A vertical scroll bar on the right side ofthe display shows the current positionof the folder view.

• ">" after an entry indicates a furtherlevel down is readable (for example afolder named after an album, withindividual album tracks within thatfolder).

• "<" before the list indicates that afurther level up is readable.

• Icons to the left of track/folder textindicate the type of file/folder. Referto the list for an explanation of theseicons.

To navigate the USB device contents, usethe up/down arrow keys to scroll throughlists, and the left/right keys to move up ordown within the folder hierarchy. Once yourdesired track, playlist or folder ishighlighted, press the OK button to selectplayback.

Note: If you wish to jump to the top levelof the USB device contents, press and hold the left arrow key.

Audio controlPress the seek up and down keys to skipbackwards and forwards through tracks.Press and hold the seek keys to enable fastrewind/fast forward through track content.Use the function buttons to enable shuffle,repeat and scan with respect to the wholedevice, folders and playlists.Press the INFO button or function button4 to display the following:• title• artist• album

• folder name• file name.

USING AN IPODVarious icons are used to identify types ofaudio file, folders etc.

iPod is the active source

iPod playlist

iPod artist

iPod album

iPod genre

iPod song

iPod generic category

iPod generic media file

OperationConnect the iPod. See Connecting anexternal device (page 202).Select the iPod as the audio source byrepeatedly pressing the AUX button untilthe iPod screen appears in the display.

204

Connectivity



The iPod menu list for browsing contentswill be available through the radio display.Navigation of the contents follows thesame principles as for iPod standalone use(for example search by artist, title, etc.).To browse the iPod contents, press theup/down arrow key or the OK button once.The display will show the trackinformation, together with other importantinformation described below:• A vertical scroll bar on the right side of

the display shows the current positionof the list view.

• ">" after an entry indicates a furtherlevel down is readable (for example allalbums by a particular artist).

• "<" before the list indicates that afurther level up is readable.

• An icon on the left side indicates thetype of the currently displayed list (forexample list of albums). Refer to thelist for an explanation of these icons.

To navigate the iPod contents, use theup/down arrow keys to scroll through lists,

and the left/right keys to move up or downwithin the hierarchy. Once your desiredtrack, playlist, album, artist or genre ishighlighted, press the OK button to selectplayback.Note: If you wish to jump to the top levelof the iPod contents, press and hold the left arrow key.

Audio control

Press the seek up and down keys to skipbackwards and forwards through tracks.Press and hold the seek keys to enable fastrewind/fast forward through track content.Use the function buttons to enable shuffleand repeat with respect to playlists.Press function button 3 to scan the wholedevice or a playlist if it is in operation.

Press the INFO button or function button4 to display the following:• title•

artist• album.

205

Connectivity



ROAD SAFETY

WARNINGS

The system provides you withinformation designed to help youreach your destination quickly and

safely.For reasons of safety, the drivershould only program the systemwhen the vehicle is stationary.The system provides no assistancewith respect to stop signs, trafficlights, areas under construction or

other important safety information.Do not use the system until you havefamiliarised yourself with itsoperation.Only view the system display whendriving conditions permit.

Safety informationRead and follow all stated safetyprecautions. Failure to do so may increaseyour risk of collision and personal injury.Ford Motor Company shall not be liablefor any damages of any type arising fromfailure to follow these guidelines.If detailed viewing of route instructions isnecessary, pull off the road when it is safeto do so and park your vehicle.Do not use the navigation system to locateemergency services.

To use the system as effectively and safelyas possible, always use the latestnavigation information. Your dealer will beable to assist with this.

206

Navigation introduction



GETTING STARTED

CAUTION

Using the system with the engine offwill drain the battery.

Note: You will be charged when sending and receiving text messages.

Note: Refer to your phone handbook for all phone functions and operation.

Note: Keep the activation code (printed onthe installation guide) in a safe place.

Note: Retain the activation text messagein your mobile phone inbox.

Compatibility of phones

CAUTIONAs no common agreement exists,mobile phone manufacturers are ableto implement a variety of profiles in

their Bluetooth devices. Because of this,an incompatibility can occur between the

phone and hands-free system, which insome cases may significantly degrade thesystem performance. To avoid thissituation, only recommended phonesshould be used.

Please visit the websitewww.ford-mobile-connectivity.com forfull details.

Installing the micro SD card

1. Remove the micro SD card from theadaptor.

2. Insert the micro SD card into the mobilephone.

Activating the mobile phonenavigation system

Note: The radio must be switched on beforeconnecting the mobile phone to the in-car GPS receiver.

Note: The Ford Mobile Navigation must beinstalled and activated on your mobile phone.

Note: It is possible to activate up to a maximum of three phones.

Note: Detailed instructions are availableon the micro SD card and atwww.ford-mobile-connectivity.com.

To connect the device to the system followthe same procedure as for Bluetooth handsfree phones. See Bluetooth setup (page181).1. Switch the radio on.

207

Navigation system



2. Switch your mobile phone on and startthe "Ford Mobile Navigation".

3. Choose "Select Destination".4. Choose "Enter Address".5. Change route options if necessary and

start the route guidance.6. The vehicle display will show the turn

information. Voice instructions areheard via the vehicle speakers.

Note: Your mobile phone will display your current position.

7. You are able to exit the application andcontinue your route guidance afterrestarting the application.

208

Navigation system



TYPE APPROVALS

FCC/INDUSTRY CANADA NOTICE

This device complies with Part 15 of theFCC Rules. Operation is subject to thefollowing two conditions: (1) this devicemay not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesiredoperation.FCC ID: WJLRX-42IC: 7847A-RX42

Changes or modifications to your devicenot expressly approved by the partyresponsible for compliance can void theuser's authority to operate the equipment.

RX-42 - declaration of conformity We, the party responsible for compliance,declare under our sole responsibility thatthe Handset Integration product RX-42 isin conformity with the provisions of the

following Council Directive: 1999/5/EC. Acopy of the Declaration of Conformity canbe found at:

www.novero.com/declaration_of_conformityThe Bluetooth word mark and logos areowned by the Bluetooth SIG, Inc. and any

use of such marks by Ford Motor Companyis under license. Other trademarks andtrade names are those of their respectiveowners.

TYPE APPROVALS

iPod is a trademark of Apple Inc.

TYPE APPROVALS

© 2008 NAVTEQ B.V. All rights reserved.

209

Appendices



ELECTROMAGNETICCOMPATIBILITY

WARNINGSYour vehicle has been tested andcertified to legislations relating to

electromagnetic compatibility(72/245/EEC, UN ECE Regulation 10 orother applicable local requirements). It isyour responsibility to ensure that anyequipment you have fitted complies withapplicable local legislations. Have anyequipment fitted by properly trainedtechnicians.

WARNINGS

The RF (radio frequency) transmitterequipment (e.g. cellular telephones,amateur radio transmitters etc.) may

only be fitted to your vehicle if they complywith the parameters shown in the tablebelow. There are no special provisions orconditions for installations or use.

Do not mount any transceiver,microphones, speakers, or any otheritem in the deployment path of the

airbag system.Do not fasten antenna cables tooriginal vehicle wiring, fuel pipes andbrake pipes.

210

Appendices



WARNINGSKeep antenna and power cables atleast 10 centimetres (4 inches) from

WARNINGSany electronic modules and airbags.

Antenna PositionsMaximum output power Watt (PeakRMS)

Frequency BandMHz

3, 450 W1– 301, 2, 350 W30 – 54

1, 2, 350 W68 – 87.5

1, 2, 350 W142 – 176

1, 2, 350 W380 – 512

1, 2, 310 W806 – 940

1, 2, 310 W1200 – 1400

1, 2, 310 W1710– 1885

1, 2, 310 W1885 – 2025

Note: After the installation of RF transmitters, check for disturbances from and to all electrical equipment in thevehicle, both in the standby and transmit modes.

Check all electrical equipment:• with the ignition ON• with the engine running• during a road test at various speeds.

211

Appendices



Check that electromagnetic fieldsgenerated inside the vehicle cabin by thetransmitter installed do not exceedapplicable human exposure requirements.

212

Appendices



AA/C

See: Climate Control...........................................75About This Manual...........................................7ABS

See: Brakes...........................................................104ABS driving hints

See: Hints on Driving With Anti-LockBrakes................................................................104

AccessoriesSee: Replacement Parts

Recommendation.............................................. 7Adjusting the Steering Wheel..................... 41Air Conditioning

See: Climate Control...........................................75Air Vents.............................................................75

Centre air vent........................................................75Side air vent............................................................75

Alarm..................................................................40Principle of Operation........................................40

Alternative frequencies.............................. .173Appendices...................................................209Arming the alarm...........................................40

Automatic arming delay................................... 40Arming the engine immobiliser................ 39

At a Glance........................................................10Adjusting the steering wheel............................ 13Airbag........................................................................16Autolamps...............................................................15Automatic climate control................................. 15Autowipers...............................................................15Direction indicators...............................................15Fuel filler flap...........................................................17Instrument panel overview............................... 10Keyless entry...........................................................13Keyless starting......................................................13Locking and unlocking.........................................12Manual climate control....................................... 14Manual seats..........................................................16

Audible Warnings and Indicators............. 62Automatic transmission................................... .62Key outside car......................................................62Lights on..................................................................62Low fuel...................................................................63Seat belt reminder...............................................63

Audio Control....................................................41Mode..........................................................................41Seek............................................................................41

Audio introduction.......................................162Audio System Security............................... 169Audio troubleshooting............................... 180Audio Troubleshooting.............................. 180Audio unit commands................................ 186

Auxiliary input......................................................190CD Player...............................................................186External devices - iPod.................................... .192External devices - USB.....................................190Radio........................................................................187

Audio unit menus..........................................173Audio unit operation....................................170Audio unit overview.....................................163Auto-Dimming Mirror...................................58Autolamps........................................................48Automatic Climate Control........................ 78

Air distribution.......................................................78Blower.......................................................................78Recirculated air......................................................79Setting the temperature.................................... 78Switching off the automatic climate

control..................................................................79Switching the air conditioning on and

off..........................................................................79Units of measure..................................................78Windscreen defrosting and demisting........ .79

Automatic Transmission............................ 101Drive modes..........................................................102Emergency park position release

lever....................................................................103General information...........................................101Hints on driving with an automatic

transmission....................................................102Selector lever positions..................................... 101

Automatic volume control......................... 173Autostore control...........................................171Autowipers........................................................43Auxiliary input (AUX IN) socket............... 179Auxiliary Input Socket...................................87

BBattery connection points........................ 144

213

Index



Bluetooth setup.............................................181Handling of phones............................................181Requirements for Bluetooth

connection........................................................181Bonnet Lock

See: Opening and Closing the Bonnet........ 132Booster cables

See: Jump-Starting the Vehicle..................... 143Booster Seats..................................................22

Booster cushion (Group 3)............................... 22Booster seat (Group 2)...................................... 22

Brake and Clutch Fluid Check.................. 138Brakes...............................................................104

Principle of Operation...................................... 104Bulb changing

See: Changing a Bulb...........................................51Bulb Specification Chart............................. 55

CCapacities and Specifications................. 159

Technical Specifications.................................. 159Car Wash

See: Cleaning the Exterior................................ 141Catalytic Converter.......................................99

Driving with a catalytic converter.................. 99

Changing a Bulb..............................................51Central high mounted brake lamp................ 54Front fog lamps.....................................................53Headlamp................................................................51Interior lamp...........................................................54Luggage compartment lamp and footwell

lamp.....................................................................55Number plate lamp.............................................54Reading lamps......................................................54Rear fog lamps......................................................54Rear lamps..............................................................53Side repeaters........................................................52

Changing a Fuse............................................119

Changing a Road Wheel............................ 145Assembling the wheel brace.......................... 147Installing a road wheel..................................... 149Jacking and lifting points................................ .146Locking wheel nuts............................................145Removing a road wheel.................................. .148Removing the wheel trim............................... .148Vehicle jack...........................................................145Vehicles with a temporary spare

wheel..................................................................145Changing the remote control

battery.............................................................30Remote control with a folding key

blade.....................................................................31Remote control without a folding key

blade.....................................................................32Changing the Wiper Blades...................... .45Rear window wiper blade................................. 46Windscreen wiper blades................................. 45

Checking the Wiper Blades....................... .45Child Safety.......................................................18Child Safety Locks..........................................24

Left-hand side.......................................................24Right-hand side....................................................24

Child Seat Positioning...................................19Child Seats.........................................................18

Child restraints for different massgroups...................................................................18Cigar Lighter.....................................................86Cleaning the Exterior....................................141

Body paintwork preservation......................... 142Cleaning the alloy wheels................................ 141Cleaning the chrome trim................................. 141Cleaning the headlamps................................... 141Cleaning the rear window................................. 141

Cleaning the Interior....................................142Instrument cluster screens, LCD screens,

radio screens...................................................142Rear windows.......................................................142Seat belts...............................................................142

Climate Control...............................................75Principle of Operation.........................................75

Climate control commands..................... 198Climate...................................................................198

Clock...................................................................86Coded keys.......................................................39Cold Weather Precautions.......................... 117Compact disc playback.............................. 175

214

Index



Compact Disc Player................................... 175Compact disc track scanning................... 176

Type 1.......................................................................176Type 2 and 3..........................................................176

Connecting an external device............... 202Connection...........................................................202

Connecting an external device - VehiclesWith: Bluetooth.........................................202Connecting a Bluetooth audio

device................................................................202Connectivity....................................................201

General Information..........................................201Convenience features.................................. 86Coolant Check

See: Engine Coolant Check............................. 137

Cruise Control.................................................110Principle of Operation........................................110Cruise control

See: Using Cruise Control................................. 110Cup Holders.....................................................86

DDiesel Particulate Filter................................ 92

Regeneration..........................................................92Digital signal processing (DSP).............. .173

Changing the DSP settings............................. 173DSP equaliser.......................................................173DSP occupancy....................................................173

Direction Indicators.......................................49Disabling the passenger airbag................ 28

Disabling the passenger airbag..................... .29Enabling the passenger airbag...................... .29Fitting the passenger airbag deactivation

switch..................................................................28Disarming the alarm.....................................40

Vehicles with keyless entry.............................. 40Vehicles without keyless entry....................... 40

Disarming the engine immobiliser........... 39DPF

See: Diesel Particulate Filter........................... .92Driving Hints.....................................................117Driving Through Water................................ .117

Driving through water ........................................117

EEco Mode..........................................................96

Principle of Operation........................................96Electric exterior mirrors................................57

Electric folding mirrors.......................................58Mirror tilting positions.........................................57

Electromagnetic compatibility................ 210Ending compact disc playback.............. .178Engine Coolant Check.................................137

Checking the coolant level.............................. 137Topping up............................................................138

Engine immobiliser........................................39Principle of Operation........................................39

Engine Oil Check...........................................137Checking the oil level.........................................137Topping up.............................................................137

Engine Oil Dipstick - 1.25L Duratec-16V(Sigma)/1.4L Duratec-16V(Sigma)/1.6L Duratec-16V Ti-VCT(Sigma).........................................................136

Engine Oil Dipstick - 1.4L Duratorq-TDCi(DV) Diesel/1.6L Duratorq-TDCi (DV)Diesel..............................................................136Type 1.......................................................................136Type 2......................................................................137

Exterior Mirrors.................................................57Manual folding mirrors........................................57

FFastening the seat belts............................... 27Fast forward/reverse.................................... 175First Aid Kit.......................................................118Floor Mats.........................................................88Fog Lamps - Front

See: Front Fog Lamps........................................48

Fog Lamps - RearSee: Rear Fog Lamps.........................................48Front Fog Lamps............................................48Fuel and Refuelling........................................97

Technical Specifications................................. 100Fuel Consumption.........................................99Fuel Consumption

See: Technical Specifications....................... 100Fuel filler flap...................................................97

Vehicles without tyre repair kit....................... 99Vehicles with tyre repair kit.............................. 99

215

Index



Fuel Quality - Diesel......................................97Long-term storage...............................................97

Fuel Quality - Petrol......................................97Fuse Box Locations.......................................119

Engine compartment fuse box....................... 119Passenger compartment fuse box............... 119

Fuses..................................................................119Fuse Specification Chart........................... 120

Engine compartment fuse box..................... 120Passenger compartment fuse box - Type

1.............................................................................123Passenger compartment fuse box - Type

2............................................................................125

GGauges...............................................................59

Engine coolant temperature gauge.............. 59Fuel gauge..............................................................59

GearboxSee: Transmission...............................................101

General Information on RadioFrequencies...................................................30

Getting started..............................................207Activating the mobile phone navigation

system...............................................................207

Compatibility of phones.................................. 207Installing the micro SD card.......................... 207

HHandbrake

See: Parking Brake.............................................104Hazard Warning Flashers............................ 49Headlamp Levelling......................................48

Recommended headlamp levelling controlpositions.............................................................49

Head Restraints...............................................81......................................................................................81Adjusting the head restraints........................... 81Removing the head restraints.......................... 81

Heated Seats...................................................85Heated Windows and Mirrors................... .79

Heated exterior mirrors...................................... 80Heated windows...................................................79

HeatingSee: Climate Control...........................................75

Hints on Driving With Anti-LockBrakes............................................................104

IIgnition Switch................................................89Immobiliser

See: Engine immobiliser................................... .39Important audio information................... 162

Audio unit labels.................................................162Disc labels.............................................................162

Information Displays....................................64General Information...........................................64

Information Messages.................................. 70Instrument Cluster........................................59Interior Lamps.................................................49Courtesy lamp.......................................................49

Reading lamps......................................................50Introduction.........................................................7iPod connection

See: Connecting an external device........... 202See: Connecting an external device - Vehicles

With: Bluetooth.............................................202iPod

See: Using an iPod............................................204ISOFIX Anchor Points...................................23

Attaching a child seat with toptethers..................................................................23Top tether anchor points................................... 23

JJump starting

See: Jump-Starting the Vehicle..................... 143Jump-Starting the Vehicle........................ 143

To connect the booster cables...................... 143To start the engine............................................. 144

KKeyless Entry....................................................36

Disabled keys..........................................................37General information............................................36Locking and unlocking the doors with the

key blade............................................................38Locking the vehicle..............................................36Passive key..............................................................36Unlocking the vehicle..........................................37

216

Index



Keyless Starting..............................................89Failure to start.......................................................90Ignition on...............................................................89Starting a diesel engine.................................... .90Starting with automatic transmission......... 89Starting with manual transmission............. .90Stopping the engine when the vehicle is

moving................................................................90Stopping the engine with the vehicle

stationary...........................................................90Keys and Remote Controls......................... 30

LLighting Control...............................................47

Headlamp flasher.................................................47Home safe lighting...............................................47Lighting control positions.................................. 47Main and dipped beam...................................... 47Parking lamps........................................................47

Lighting...............................................................47Load Carriers

See: Roof Racks and Load Carriers............... 112Load Carrying..................................................112

General Information............................................112Locking and Unlocking.................................34

Double locking.......................................................34Locking.....................................................................34Locking and unlocking confirmation........... .34Locking and unlocking the doors from

inside....................................................................35Locking the doors individually with the

key.........................................................................35Luggage compartment lid................................ 35Unlocking................................................................34

Locks...................................................................34Luggage Covers..............................................112

MMaintenance....................................................131

General Information...........................................131Technical Specifications.................................. 139

Manual Climate Control.............................. 76Air distribution control........................................76Blower.......................................................................76Recirculated air......................................................76System settings.....................................................76

Manual Seats...................................................82Adjusting the angle of the seatback............. 84Adjusting the height of the driver ’s

seat.......................................................................84Adjusting the lumbar support......................... 83Folding the seatback forwards -

3-door..................................................................83Moving the seats forwards or

backwards.........................................................82Returning the seatback to the seating

position - 3-door.............................................83Manual Transmission.................................. 101

Selecting reverse gear....................................... 101Map Pockets.....................................................87Message Centre

See: Information Displays................................ .64MirrorsSee: Heated Windows and Mirrors............... .79See: Windows and Mirrors................................ 56

MP3 connectionSee: Connecting an external device.......... .202See: Connecting an external device - Vehicles

With: Bluetooth.............................................202MP3 display options....................................178

CD text display options..................................... 178MP3 file playback..........................................176

File formats............................................................177ID3 Tag Version 2.................................................177ISO 9660 format................................................176MP3 files playback order.................................. 177MP3 navigation....................................................178Multi session.........................................................176Playing a multi session disc............................. 177

NNavigation introduction............................ 206Navigation system.......................................207News broadcasts..........................................173

OOccupant protection..................................... 25

Principle of Operation.........................................25Oil Check

See: Engine Oil Check........................................137On/off control................................................170

217

Index



Opening and Closing the Bonnet............ 132Closing the bonnet.............................................132Opening the bonnet........................................... 132

PParking Aids...................................................106

Principle of Operation...................................... 106Parking Aid - Vehicles With: Front and

Rear Parking Aid.........................................107Manoeuvring with the parking aid................ 107Switching the parking aid on and off.......... 107

Parking Aid - Vehicles With: Rear ParkingAid...................................................................106

Parking Brake.................................................104Personalised Settings.................................. 69Chime deactivation.............................................70

Measure units........................................................69Power Door Locks

See: Locking and Unlocking............................. 34Power Windows.............................................56

Anti-trap function................................................56Driver's door switches........................................56Opening and closing the driver's window

automatically...................................................56Resetting the memory of the electric

window................................................................57Safety switch for rear windows...................... 56Programming the remote control............ 30

Programming a new remote control............ 30Reprogramming the unlocking

function...............................................................30

RRear Fog Lamps.............................................48Rear Seats........................................................84

Folding the seatbacks down.......................... .84Rear view camera........................................108

Principle of Operation...................................... 108Rear View Camera.......................................108

Activating the rear view camera................... 108Deactivating the rear view camera............ .109Switching the rear view camera on and

off........................................................................109Using the display................................................108

Rear Window Wiper and Washers........... 44Intermittent wipe.................................................44Rear window washer.......................................... 45Reverse gear wipe................................................44

Refuelling..........................................................99Regional mode (REG)................................. 174Remote control battery

See: Changing the remote controlbattery.................................................................30

Remote control programmingSee: Programming the remote control........ 30

Removing a Headlamp................................ 50Repairing Minor Paint Damage................ 142Repeat compact disc tracks..................... 175

Type 1.......................................................................175

Type 2 and 3..........................................................175Replacement PartsRecommendation..........................................7Look for the Ford logo on the following

parts .......................................................................8Now you can be sure that your Ford parts

are Ford parts.......................................................7Road Safety...................................................206

Safety information........................................... .206Roadside Emergencies................................ 118Roof Racks and Load Carriers................... 112

Roof rack.................................................................112Running-In........................................................117Brakes and clutch.................................................117Engine.......................................................................117Tyres..........................................................................117

SSafety Precautions........................................ 97Satellite Navigation Unit Holder.............. 88

Adjusting the holder...........................................88Seat belt height adjustment...................... 27Seat belt reminder......................................... 28

Deactivating the seat belt reminder............. 28Seat belts

See: Fastening the seat belts........................... 27Seats....................................................................81Security code.................................................169Shuffle/random.............................................175

Type 1.......................................................................175Type 2 and 3..........................................................175

Sitting in the Correct Position.................... 81

218

Index



Snow ChainsSee: Using Snow Chains.................................. 154

Sound button.................................................170Speed Control

See: Cruise Control.............................................110Stability Control............................................105

Principle of Operation...................................... 105Starter Switch

See: Ignition Switch............................................89Starting a Diesel Engine.............................. 92

Cold or hot engine................................................92Starting and Stopping the Engine........... 89

General Information...........................................89Starting a Petrol Engine................................ 91

Cold or hot engine.................................................91

Engine idle speed after starting..................... .92Flooded engine......................................................91Start-Stop........................................................94

Principle of Operation........................................94Station preset buttons................................. 171Station tuning control................................. 170

DAB service linking.............................................170Manual tuning......................................................170Scan tuning...........................................................170Seek tuning...........................................................170

Steering Wheel Lock....................................90

Vehicles with keyless starting.......................... 91Vehicles without keyless starting................. .90Steering Wheel................................................41Storage compartments............................... 86Sun Visors.........................................................86Switching Off the Engine............................ 93

Vehicles with a turbocharger........................... 93Symbols Glossary.............................................7

Symbols in this handbook................................... 7Symbols on your vehicle....................................... 7

TTechnical SpecificationsSee: Capacities and Specifications............ .159

Telephone commands............................... 193Create a phonebook.......................................... 196Main settings........................................................197Phone......................................................................193Phone functions.................................................194

Telephone controls...................................... 182Remote control...................................................182

Telephone setup............................................181Bond another Bluetooth phone.................... 182Making a phone an active phone................. 182Phonebook.............................................................181Phonebook categories...................................... 182

Telephone.........................................................181General Information...........................................181

TelephoneSee: Using the telephone................................ 182

Toll Reader........................................................87Tow Ball.............................................................113

Driving with a trailer............................................115Driving without a trailer.....................................116Inserting the tow ball arm................................ 114Maintenance.........................................................116

Removing the tow ball arm............................. 115Unlocking the tow ball armmechanism.......................................................114

Towing a Trailer...............................................113Steep gradients....................................................113

Towing Points.................................................129Towing the Vehicle on Four

Wheels...........................................................129All vehicles............................................................129Vehicles with automatic

transmission....................................................129

Towing................................................................113Track selection...............................................175Type 2 and 3..........................................................175

Traffic information control......................... 171Activating traffic announcements................. 171Ending traffic announcements...................... 172Traffic announcement volume....................... 172

Transmission...................................................101Trip Computer.................................................69

....................................................................................69Odometer...............................................................69

Type approvals.............................................209FCC/INDUSTRY CANADA NOTICE.............209RX-42 - declaration of conformity............. 209

Tyre Care..........................................................153Tyre Pressures

See: Technical Specifications........................ 154Tyre Repair Kit...............................................150

General information..........................................150Inflating the tyre...................................................151Using the tyre repair kit......................................151

219

Index



TyresSee: Wheels and Tyres..................................... 145

UUnder Bonnet Overview - 1.25LDuratec-16V (Sigma)/1.4L Duratec-16V(Sigma)/1.6L Duratec-16V Ti-VCT(Sigma).........................................................133

Under Bonnet Overview - 1.4LDuratorq-TDCi (DV) Diesel.................... 134

Under Bonnet Overview - 1.6LDuratorq-TDCi (DV) Diesel.................... 135

USB Port...........................................................88USB

See: Using a USB device................................. 203Using an iPod................................................204Audio control.......................................................205Operation.............................................................204

Using a USB device.....................................203Audio control......................................................204Operation..............................................................203

Using Cruise Control....................................110Cancelling the set speed................................... 111Changing the set speed.................................... 110Resuming the set speed..................................... 111

Setting a speed....................................................110Switching cruise control off.............................. 111Switching cruise control on............................. 110

Using Eco mode.............................................96Resetting Eco mode........................................... 96

Using seat belts during pregnancy.......... 28Using Snow Chains......................................154

Vehicles with stability control (ESP).......... 154Using Stability Control...............................105

Vehicles with stability control (ESP)switch.................................................................105

Using start-stop.............................................94To re-start the engine......................................... 95To stop the engine...............................................94

Using the telephone.................................... 182Changing the active phone............................ 184Debonding a bonded phone.......................... 184Making a call........................................................183Muting the microphone................................... 184Receiving an incoming call............................. 183Receiving a second incoming call................ 184

Using voice control......................................185Name tag...............................................................186System operation...............................................185

Using Winter Tyres.......................................154

VVehicle battery...............................................143Vehicle Care.....................................................141Vehicle Identification Number................. 158Vehicle Identification Plate....................... 158Vehicle identification.................................. 158Vehicle recovery............................................129Ventilation

See: Climate Control...........................................75

VentsSee: Air Vents.........................................................75VIN

See: Vehicle Identification Number............. 158Voice control..................................................185

Principle of Operation.......................................185Voice Control...................................................42

220

Index



222

fiesta mk6

Documents