fid 9000 specifications 9000_ specifications.pdf · · 2018-03-23tetra-chloro-ethylene 0-100 ppm...
TRANSCRIPT
2016년 개정된) 총탄화수소의 공정시험법과 완벽하게 일치하며, 전세계에서
가장 가볍고, Low Cost 하며 NMHC Docking 을 별도로 사용하지 않고, THC, CH4 와 NMHC 을
분리측정 할 수 있으며, 또한 산소(O2) 농도와 상관없이 THC 을 실시간 측정분석 할 수 있으며
hot-FID GC 로서 CH2O, BTEX 등도 동시에 측정 할 수 있는 진정한 Portable hot - THC Analyzer
총탄화수소분석기 FID 9000입니다
FID 9000_ Specifications Made in Italy
Measurement THC ,CH4, NMHC / TVOC
Technology
Hot FID – Flame Ionisation Detection
Catalytic separation of the Methane fraction
Range
0-20/100/200/500/1,000/5,000/10,000 ppm and/or mg/Nm3
Other Ranges please consult
Accuracy ± 0.5% of full scale
Background noise 0.1ppm (0.2 mg/Nm3)
Lower Detectable
Limit0.2ppm (0.4 mg/Nm3)
Drift
Zero ± 0.5 % of full scale
Span ± 0.5% of full scale
Response time 1 sec to 98% full scale deflection
Linearity Better than 0.5%
Sample flow rate 800 ml/min
Data storage 4GB or compact flash card & USB port (min.1 sec unit) & Data Acquisition System
Digital display 320 x 200 pixel 5.5” colour TFT-LCD video graphic display
Serial output USB port (Ethernet, RS 232 or RS 485 as option)
Operating
temperature0 – 40 ℃
Analogue outputs
Printer
0 – 10 Vdc, 4 – 20 mA (optional)
Printer management allows you to use the printer by USB port (optional)
Services
Hydrogen : IP 25 ml/min from external gas cylinder
Air : 200 ml/min, from in built generator
Dimensions
Weight
Sampling probe
Sampling line
Carrying case
370 x 210 x 270 mm
7.2 kg
300mm,700mm,1000mm (request .length)
- SS sampling probe with up to 180℃ sampling tube 3m, when sampling from stacks
- Heated filter SS sampling probe up to 180℃ with up to 180℃ sampling tube 3m
Mini cylinder basket (two positions) & Built in + Hydrides
Solid state hydride tank add H2 source (option)
Reinforced aluminium box with carrying strip
Model. FID 9000 GC is a versatile portable FID based gas chromatograph (GC) particularlysuitable to monitor special hydrocarbons both for stack and environmental monitoring.Its versatility includes:i) pre configured program MMC card, by changing the recipe the instrument performs different
analysisii) a powerful data card in which all the working conditions as well as the measured data are
recorded;iii) here below some of the more frequent measurements performed by FID 9000 GC as option
Species Minimum Range Sensitivity Applications
Methane/NMHC 0 - 10 ppm 0.1 ppm Stack emissions
Field controls on continuous NMHC
analysers
Auditing
Styrene + Acetone 0-100 ppm 1 ppm Fibber glass manufacturers (boats,
cabinets etc.)
Halogenated HC
Three-chloro- ethane,
di-chloro-ethylene,
tetra-chloro-ethylene
0-100 ppm 1 ppm Industrial plant
Benzene and Toluene 0-10 ppm 0.1 ppm Petrol plants
Petrol stocks
Stack emissions
Gas station controls
Ground pollution
Ethylene oxide
and Propylene oxide
0-10 ppm 0.1 ppm Sterilised environment
Fruit stocks
Ethyl acetate 0-100 ppm 1 ppm Pilot plant
Printing plants
Acetic acid 0-100 ppm 1 ppm Industrial plant
Meta-xylene
(Three methyl benzene)
0-10 ppm 0.1 ppm Industrial plant emission
Ethyl and propyl alcohols % level Fraction of % L.E.L (Low Explosion Limit)
measurements
Formaldehyde
(CH2O)
0-20 ppm 0,2 ppm Industrial plant
Plastic industries
Wood industries
Industrial hygiene
THC Analyzer 세일국제무역 02-837-6974 [email protected] www.rbr.co.kr
Heated dust filter SS sampling probe up to 180℃ with up to 180℃ sampling tube 3m (add. line length)
SS sampling probe on top dust filter with up to 180℃ sampling tube 3m, when sampling from stacks