AI NVR Quick guidePrecautions before use:

1. Access the hard disk and format the hard disk (the hard disk can support up to 6T)

2. Connect a camera that supports face capture, enter the network Settings of the video recorder to activate the face module, click "activate" to start the activation and wait for the word "successfully activated". It is necessary to reactivate the face module after formatting the hard disk every time. In general, it is not necessary to often format the hard disk, so as to avoid activating the face module every time (the hard disk recording file overwriting itself will not affect the face module).

3. Use high quality Cat5E or Cat6 ethernet cable to connect IVR and camera.

. Ⅰ AI Intelligence-Face.

Face Fast Storage

Click it, enter Face Fast Storage interface, and scan the face image of the interval at the real-time face below, and add the stranger into the right side into the database. (Photos of strangers in the box on the right can also be viewed in the Face database - Strangers database), as shown in Figure 2-9-2.

Figure 2-9-2 Face Fast Storage

It can add strangers to the local face database by double-clicking the face image of the stranger captured on the right side, as shown in Figure 2-9-2-1.

Figure 2-9-2-1 Edit Face Info

It can edit the facial, covering the name, gender, type (white list, blacklist, stranger), which channel.

Real-time View

Select the real-time view in Figure 2-9 to enter the comparison interface, as shown in Figure 2-9-1.

Figure 2-9-1 Real-time comparison

Real-time Face: Capture facial pictures in real time, CH01-CH04 is displayed by default.

Comparison result: The face image captured in real time is compared with the facial picture in the local library, and the comparison result information (including name, gender, age, similarity, photo, channel) is given.

Switch channel: Click to switch channel from CH01-CH04 to CH05-CH08.

Application

Select Application Management in Figure 2-9 to enter the application management interface, as shown in Figure 2-9-3.

Figure 2-9-3 Application Management - Local View - Whitelist

Figure 2-9-3 Application Management - Local View - Blacklist

Figure 2-9-3 Application Management - Local View - Stranger

Application management: face database management, face control alarm, people counting.

Face Database Management: Local View: whitelists, blacklists, and strangers (locally view the default face whitelisted photo).

Record Search

Select the video search in Figure 2-9 to enter the video search interface (the whitelist, blacklist and stranger's video search methods are the same), as shown in Figure 2-9-11.

Figure 2-9-12 Record Search-1

Video search: It can query all facial pictures according to date, name, gender, and age. Select a facial picture and click to search video. Find the video that the person has appeared, as shown in Figure 2-9-12.

Figure 2-9-13 Record Search-2

Video can be retrieved according to choose person, the blue part shows the person that selected, and the right side is the picture of the person that captured in the video.

.Ⅱ AI Intelligence -Humanoid

Real-time View

In Figure A-1, select Real-time View and enter the Humanoid Preview interface, as shown in Figure A-2.

Figure A-2 Real-time View

There are two types of real-time capture: one is the regional intrusion capture, and the other is the cross-border detection capture.

Switch channel: The real-time preview interface only supports displaying 4 channels at a time. Click to switch channels to switch the displayed channels.

Note: This page only captures humanoid photos, supports the face camera, but not image.

Application – Regional Invasion

In Figure A-1, select Application – Regional Invasion -Settings interface, as shown in Figure A-3

.

Figure A-3 Area Invasion

The Regional Invasion interface with alarming settings, remote alarm linkage settings, local alarm settings, and canvas defense zone boxes.

Alarm settings:

Channel: Supports setting for each channel, now supports 8 channels and 16 channels.

Display human shape: After selected, there will be a blue marker box after detecting the human shape in the channel.

Auto capture: An alarm occurs in the area intrusion box after selected, a photo will be captured and stored in the image retrieval library.

Alarming time: Arming time can be set to two time periods of the day, or two different time periods can be set every day from Monday to Sunday.

Linkage alarm:

Alarm Duration: Calculated in seconds, when the alarm is detected, the area frame will turn red and flash (the time to red and flash is the set number of seconds).

White Light: When the alarm is detected, the white light of the camera will be on (the length of the light is equal to the set alarm time)

Sound: Select sound from 1to 3. When an alarm is detected, the sound will be the selected one.

Alarming area:

1. Draw four alarming frames in the alarming area, and the first one will be overwritten when draw the

fifth one.

2. Select the area number and click the right button to remove the area box.

3. It will alarm when enter in the zone box.

Local alarm setting: Check the buzzer alarm (the buzzer will alarm when detected), the bullet box shows (the preview interface will shows the box to indicate the 'humanoid area intrusion' when the alarm is detected), and the mobile phone alarm (Danale APP appear alarm message), email alarm (the recipient will receive the humanoid alarm mail), alarm video (when it detected human shape after selected, it will appear the orange marker in the video replay library).

Note: 1. Sound can be customized in IVS.

2. White light and sound need to connected hardware, otherwise it cannot see any effects!

3. The buzzer alarm needs to be connected to the hardware buzzer.

Application - Cross-Border Detection

In the humanoid interface of Figure A-1, select Application - Cross-Border Detection setting interface, as shown in Figure A-4:

Figure A-4 Cross-Border Detection

The cross-border detection interface with alarming settings, remote alarm linkage settings, local alarm settings, and draw the alarm lines.

Alarming settings:

Channel: Supports setting for each channel, now supports 8 channels and 16 channels.

Display human shape: After selected, there will be a blue marker box after detecting the human shape in the channel.

Auto capture: An alarm occurs in the area intrusion box after selected, a photo will be captured and stored in the image retrieval library.

Alarming time: Alarming time can be set to two time periods of the day, or two different time periods can be set every day from Monday to Sunday.

Linkage alarm:

Alarm duration: Calculated in seconds, when the alarm is detected, the area frame will turn red and flash (the time to red and flash is the set number of seconds).

White light: When the alarm is detected, the white light will turn on (the length of the light is equal to the set alarm time)

Sound: Select sound from 1to 3. When an alarm is detected, the sound will be the selected one.

Border line:

1. The number of border line display 1 by default, and not support modification.

2. Draw a border line in the arming area, and choose different detection directions, support A→B, B→A, A→B&B→A.

3. A→B: When the human shape is detected on the A side, and the human shape is detected on the B side, it will trigger alarm.

B→A: When the human shape is detected on the B side, and the human shape is detected on the A side, it will trigger alarm.

A→B&B→A: As long as the human shape is detected on both sides, the alarm will be triggered, regardless of A→B or B→A.

Local alarm setting: Select the buzzer alarm (the buzzer will alarm when detected), the bullet box shows (the preview interface will shows the box to indicate the 'humanoid area intrusion' when the alarm is detected), and the mobile phone alarm (Danale APP appear alarm message), email alarm (the recipient will receive the humanoid alarm mail), alarm video (when it detected human shape after selected, it will appear the orange marker in the video replay library.).

Note: 1. Sound can be customized in IVS.

2. White light and sound need to connected hardware, otherwise it cannot see any effects!

3. The buzzer alarm needs to be connected to the hardware buzzer

Record Search

In Figure A-1, select the video search and enter the video search settings interface, as shown in Figure A-5.

Figure A-5 Record Search

The Record Search stores the alarm video, which supports query by date, start time and channel.

Human Search

In Figure A-1 the humanoid interface, select Face Search to enter the setting interface, as shown in Figure A-6:

Figure A-6 Face Search

The Face Search stores the alarm capture, which supports query by date, start time and channel.

APPThe first is the QR code of the client's download and the QR code of the desired serial number. As shown in Figure 1-2

Figure 1-2 Mobile phone APPAPP: DanaleCMS：Danale