fiber testing - lab-wissenlab-wissen.de/files/fiber-testing_fuz8pi07.pdf · 3 precision fiber...
TRANSCRIPT
1
FIBERTESTING
2 F i b e r s
F025A Microscopy Cross Section Kit
F102/A Lint and Trash Analyzer MK2
Contains all the equipment and consumables used in making fiber and yarn cross sections by the plate and modified cork methods recommended by AATCC.
Lint and Trash Analyzer MK2 (Cotton Model). To determine lint, trash and dust content within a sample of cotton fiber up to 100 grams. Also used to determine non-fiber content of synthetic fibers and to open and clean fibers for further testing. The analyzer uses the carding principle with air separation of lint and non-lint content.
Lint and Trash Analyzer MK2 (Wool Model). To determine vegetable and other foreign matter content in raw wool. Wool tops and waste and preparation of samples for fineness testing. Also suitable for determining the yield of high value fibers such as cashmere and angora, as well as determining non-fiber content of long staple synthetic fibers.
ORDERING INFORMATION
202159 Microscopy Cross Section Kit
202758 Dissecting/Pick Counting Needles with Handle (Pack of 12)
STANDARDS:
AATCC20
STANDARDS:
ITMF
SIZEWEIGHT 1 kg / 2.2 lbs
DIMENSIONS 200 mm (w) x 150 mm (d) x 100 mm (h) /8 in (w) x 6 in (d) x 4 in (h)
SIZEWEIGHT 100 kg / 220 lbs
DIMENSIONS 750 mm (w) x 1000 mm (d) x 600 mm (h) / 30 in (w) x 40 in (d) x 24 in (h)
ORDERING INFORMATION202586 Lint and Trash Analyzer (Cotton Model)
200770 Lint and Trash Analyzer MK2 (Wool Model)
203634 Primary Filter Assembly
203635 Secondary Filter Assembly
w w w . s d l a t l a s . c o m 3
Precision Fiber Microtome F214
STANDARDS:
AATCC20
To produce fiber cross sections of microscopic examination, measurement and identification.
To determine the tensile strength of natural fibers. Includes 1 pair of clamps and spacer, torque vice and wrench, cutter, comb and tweezers. A 5 mg x 0.01 mg capacity balance is required but not included.
Hand operated, to determine the linear density (count) of slivers and rovings. Fitted with roving bobbin stand, digital counter and precision cutter. Specify 1 meter or 1 yard circumference.
ORDERING INFORMATION
105217 Precision Fiber Microtome
SIZEWEIGHT 3 kg / 6.6 lbs
DIMENSIONS 75 mm (w) x 150 mm (d) x 100 mm (h) /3 in (w) x 6 in (d) x 4 in (h)
SIZE
WEIGHT 3.2 kg / 7 lbs
DIMENSIONS 330 mm (w) x 100 mm (d) x 125 mm (h) /13 in (w) x 4 in (d) x 5 in (h)
SIZE
WEIGHT 20 kg / 45 lbs
DIMENSIONS 280 mm (w) x 430 mm (d) x 600 mm (h) / 11 in (w) x 17 in (d) x 24 in (h)
ORDERING INFORMATION
104008 Pressley Fiber Bundle Strength Tester
104009 Clamps & Spacer (1 pair)
104010 Leather Clamp Facings (pack of 30)
ORDERING INFORMATION
300059 Sliver and Roving Reel Meter
300060 Sliver and Roving Reel Yard
Sliver and Roving Reel F216A
STANDARDS:
ISO137 BS 2043 ASTM D2130 Woolmark TM 24 GB 10685
STANDARDS:
ASTM D1445 ASTM D2524 BS 5116 ISO 3060
Pressley Fiber Bundle Strength Tester F215
4 F i b e r s
F217A/B/C Rapid Oil Extraction Apparatus
F256A Moisture Regain Oven
To determine the oil or finish content of wool or syn-thetic samples by solvent percolation and evaporation. Suitable for fiber, yarn or fabric. Available with 1, 2 or 3 extraction units. To be fully compliant with Edana method ERT 155, it needs a large extraction tube- 12 mm (OD), 10 mm (ID). (Full title of new method is: DETERMINATION OF ACETONE EXTRACTABLE FINISH ON NONWOVENS).
To determine the moisture content and regain percent-age of textile materials. Drying is performed by circu-lation of warm air electrically heated, regulated by an electronic temperature controller (range 0°/180°C, ac-curacy ±1°C). The material to be tested is dried within a metal container suspended from an electronic balance. Two successive weights of the same value determine the point at which moisture content can be calculated. Includes an electronic balance with 2100 g capacity and 0.01 g accuracy. The sample is weighed automatically by means of a basket connected to the balance.
ORDERING INFORMATION
105265 Rapid Oil Extraction Apparatus Single
105266 Rapid Oil Extraction Apparatus Double
105267 Rapid Oil Extraction Apparatus Triple
105268 Foil Residue Trays (Pack of 50)
SIZEWEIGHT 4.4 kg / 9.7 lbs
DIMENSIONS 170 mm (w) x 170 mm (d) x 380 mm (h) /7 in (w) x 7 in (d) x 15 in (h)
SIZEWEIGHT 130 kg / 286 lbs
DIMENSIONS 1000 mm (w) x 700 mm (d) x 1280 mm (h) / 40 in (w) x 28 in (d) x 54 in (h)
ORDERING INFORMATION300064 Moisture Regain Oven
STANDARDS: ASTM D2564 BS 4784 ISO 6741