fiber optics section a - digi-key sheets/richco inc pdfs... · 2003-01-30 · distribution...
TRANSCRIPT
DISTRIBUTION BOX/DRAWER-FIBER
4 773-539-4060 Samples: 1-800-621-1892
OFST-1-LOptical Fiber Splice Tray Lid
OFST-1-POptical Fiber Splice Tray -
Plain with Basic Storage Facility
OFST-1-MOptical Fiber Splice Tray - Managed
with Radius Control andDark Fiber Storage
Dimensioned in millimeters
Dimensioned in millimeters
Dimensioned in millimeters
Tray Thickness = 10mm
Tray Thickness = 10mm
Miniflex technologymanufactured by Richco
Miniflex technology manufactured by Richco
Miniflex technology manufactured by Richco
Material: Flame Retardant ABS, RMS-105 (UL 94V0) Color: BlackStandard Pack: 10 per bag
Part No.OFST-1-L
Material: Flame Retardant Nylon, RMS-104 (UL 94V0) • Color: BlackStandard Pack: 10 per bag
Part No.OFST-1-M
Material: Flame Retardant Nylon, RMS-104 (UL 94V0) • Color: BlackPart No. Standard Pack
OFST-1-P 10 per bag
OFST-A-P-1 1 per Bag - Includes: 2 Red Hinges, 2 Green Hinges,1 - OFST-1-L, Lid and 1 - OFST-1-P, Plain tray
Features• Stackable to any number of
trays• Inter-tray fiber routing
possible through slots alongone of the long sides
• Color coded hinges indicatesside of tray to open from
• OFSH-6-3.5 holds from0.3mm to 3.5mm diametercomponents or jacketed fiberin various positions on thetray for splice holding and forentry and exit port holders
DISTRIBUTION BOX/DRAWER-FIBER
5773-539-4060 Samples: 1-800-621-1892
OFSTH-1Optical Fiber Splice Tray Hinge
OFSH-6-3.5Optical Fiber Splice Holder
Dimensioned in millimeters
Miniflex technologymanufactured byRichco
Miniflex technology manufactured byRichco
OFSH-TSplice Holder
Features• OFSH-T-6 designed to hold 3mm fiber or
components, i.e. couplers, splice protectors(OFSP on page 9), and WDM’s
• OFSH-T-12 designed to hold crimp spliceprotectors
Material: Polypropylene/Santoprene Mix • Color: NaturalStandard Pack: 10 per bag
Part No. AdhesiveOFSH-6-3.5 Without Adhesive
OFSH-6-3.5A With AdhesiveOFSH-6-3.5L Lid, No Adhesive
Material: Polypropylene/Elastomer MixStandard Pack: 20 per bag
Part No. ColorOFSTH-1-RED RedOFSTH-1-GRN Green
Material: Nylon 6/6 • Color: BlackStandard Pack: 100 per bag
Part No. RMS 01 Part No. RMS 19OFSH-T-6-01BLK OFSH-T-6-19BLKOFSH-T-12-01BLK OFSH-T-12-19BLK
OFSH-T-6-01BLK OFSH-T-12-01BLK
DISTRIBUTION BOX/DRAWER-FIBER
6 773-539-4060 Samples: 1-800-621-1892
6.6
32
16.0
27.4
66.0
Ø6.
0/6.
2
8 HOLES DIA 2.8mm ON PCD 30mm
135
85
52
45
EFA04 25 001Array Tray
Features• Molded-in features maintain bend radius at 30mm• Accepts Isolator Clips EFA04 61, 63 and 64 001 (shown below)
for holding splicing components• Accepts 16-way Fiber Clip EFA04 06 and 08 001 (page 7)
broken into a 4-way segment for holding splicing components
"A"
"B" 8
17.5
14.2
10
26.5 1.00
Ø1
16
1
22
drill through ø2.7c/snk ø4.5 x 90°
EFA04 Isolator ClipsIsolator Clip
"A""B
"
7.33
17.5
1022
26.5
14.2
1.00
drill through Ø2.7c/snk Ø4.5 x 90°
17.5
26.5
Features• Designed to hold 6mm, 5.5mm or
4.5mm diameter components• Designed for use in the Array Tray
EFA04 25 001 (shown above)• Can be screw or rivet mounted or
mounted with self adhesive pads• EFA04 61 001 has anti-rotation pins to
securely mount when using screw orrivet
EFA04 61 001 EFA04 63/64 001
Material: Flame Retardant Polyamide 6 (UL 94V0) • Color: BlackStandard Pack: 50 per bag
Dimensioned in millimeters
Dimensioned in millimeters
Material: Flame Retardant Polyamide 6 (UL 94V0)
Part Number Standard Pack: 100 per bagContents Color “A” “B”
EFA04 61 001 6mm Isolator ClipRed 6.9 5.3
EFA04 61 ASS EFA04 61 001 with self adhesive padEFA04 63 001 5.5mm Isolator Clip
Green 7.5 4.9EFA04 63 ASS EFA04 63 001 with self adhesive padEFA04 64 001 4.5mm Isolator Clip
Yellow 8.5 5.3EFA04 64 ASS EFA04 64 001 with self adhesive pad
A Europlus/Richco product
A Europlus/Richco product
DISTRIBUTION BOX/DRAWER-FIBER
7773-539-4060 Samples: 1-800-621-1892
72.6626
.535.6 17.55 17.55
"A"
Features• Can be broken apart to form 3 individual
clips holding 4, 4 and 8 fiber orcomponents
• A broken apart 4-way can be used in theArray Tray EFA04 25 001 (page 6)
• EFA04 06 designed to hold 2mmdiameter fiber or components, i.e.couplers, splice protectors (OFSP onpage 9), and WDM’s
• EFA04 08 designed to hold 3mmdiameter fiber or components, i.e.couplers, splice protectors (OFSP onpage 9), and WDM’s
Dimensioned in millimeters
Dimensioned in millimeters
EFA04 16-Way Fiber Clips
16-Way Fiber Clip
A Europlus/Richco product
Features• Holds twelve 2.7 or four 4.2 splices• Ability to stack with “no screw lugs”• Secures optical splices in an efficient and compact manner
while still maintaining integrity• Fastens with either a self-adhesive pad, provided, or via a
screw or rivet
Features• Holds two splices ø3.80 to 5.72 and two splices ø5.72 to ø8.00• Mounts with two SRVO-3055 snap rivets
OFSHOptical Fiber Splice Holder
OFSH-4-2-19Optical Fiber Splice Holder
Material: Flame Retardant Polyamide 6 (UL 94V0)
Part Number Standard Pack: 100 per bagContents Color “A”
EFA04 06 001 16-way 2mm Fiber ClipBlack 4.8
EFA04 06 ASS EFA04 06 001 with self adhesive padEFA04 08 001 16-way 3mm Fiber Clip
Blue 6.4EFA04 08 ASS EFA04 08 001 with self adhesive pad
Material: Nylon 6/6, Flame Retardant, RMS-19 • Color: NaturalStandard Pack: 50 per bag
Material: Nylon 6/6 • Color: NaturalStandard Pack: 50 per bag
Part No. RMS-01 Part No. RMS-19OFSH-4-1-01LA OFSH-4-1-19LA
DISTRIBUTION BOX/DRAWER-FIBER
8 773-539-4060 Samples: 1-800-621-1892
14.60
9.00
26.50
14.7
5
4.80
4.45
EFA04 02 ASSFiber Clip
Features• Designed to hold 3mm diameter fiber or
components, i.e. couplers, splice protectors(OFSP on page 9), and WDM’s
• Comes with self adhesive pad for quickand easy mounting
Dimensioned in millimeters
A Europlus/Richco product
Features• Designed to hold up to 4 - 3.9mm
diameter, 6 - 2.9mm diameter, or 6 -3.4mm diameter couplers or components
• EFA04 18 can be broken apart to formindividual clips
Ø3.9
Ø3.9
Ø2.9
Ø2.9
Ø2.9
Ø3.4
Ø3.4
Ø3.4
EFA04 71 P03Ø3.9 COUPLER CLIP
EFA04 71 P01Ø2.9 COUPLER CLIP
EFA04 71 P02Ø3.4 COUPLER CLIP
21.4 32.6 32.6
27
EFA04 71 XXX
275.
5
1022
.5
Ø3.9
Ø3.9
Ø2.9
Ø2.9
Ø2.9
Ø3.4
Ø3.4
Ø3.4
88.6
EFA04 18 001
Dimensioned in millimeters
EFA04 Coupler ClipsCoupler Clips
A Europlus/Richco product
Material: Flame Retardant Polyamide 6 (UL 94V0) • Color: BlackStandard Pack: 100 per bag
Material: Flame Retardant Polyamide 6 (UL 94V0) • Color: Black
Part Number Standard Pack: 100 per bag Contents
EFA04 18 001 4-way 3.9mm X 6-way 3.4mm X 6-way 2.9mm Coupler Clip EFA04 18 ASS EFA04 18 001 with 8 self adhesive pads EFA04 71 001 6-way 2.9mm Coupler Clip EFA04 71 P01 EFA04 71 001 with 3 self adhesive pads EFA04 71 002 6-way 3.4mm Coupler Clip EFA04 71 P02 EFA04 71 002 with 3 self adhesive pads EFA04 71 003 4-way 3.9mm Coupler Clip EFA04 71 P03 EFA04 71 003 with 2 self adhesive pads
DISTRIBUTION BOX/DRAWER-FIBER
9773-539-4060 Samples: 1-800-621-1892
Dimensioned in millimeters
OFSP/ROFSPOptical Fiber and Ribbon Fiber Splice
Protector
DescriptionRichco’s Optical Fiber Splice Protector(OFSP) provides excellent protection andsupport for fiber optic heat fusion splices.The OFSP is assembled with a stainlesssteel backbone and a meltable inner liner.When installed over a heat fusion splice, allinsulation and mechanical properties arerestored while creating an imperviousbarrier around the splice region
Features• Splice region becomes mechanically and
environmentally protected• ROFSP for ribbon or flat fiber splice
protection• OFSP-08 for space saving miniature splice
protection• Custom lengths avialable by Special Order
20
1.6
4.05
48
PITCH 3.00
EFA04 12 ASS900 Micron Buffered
15-Way Fiber Clip
Features• Designed for easy routing of up to 15 - 900
micron fiber• Quick and easy self adhesive mounting
Material: Outer Tube - Heatshrink 3:1 Ratio Cross-Linked Modified Polyolefin; INNER TUBE - Modified PE CopolymerAdhesive; ROD - Stainless Spring Steel to BS & ASA 2056 Type 302 S 26 • Color: Clear
Part No.Standard Pack: 100 per bag
Nominal SleeveLength “A” Ref.
Inner Tube Dia. Min.“B” Nominal Rod Dia. “C” Recovered Dia. “D”
Ref. Figure No.
OFSP-10-25* .98 (25.0)
.06 (1.5) .04 (1.0) .09 (2.4)
1
OFSP-10-30* 1.18 (30.0)OFSP-10-35* 1.38 (35.0)OFSP-10-40* 1.57 (40.0)OFSP-10-45* 1.77 (45.0)OFSP-10-61* 2.40 (61.0)OFSP-15-40* 1.57 (40.0)
.06 (1.5) .06 (1.5) .11 (2.8)OFSP-15-61* 2.40 (61.0)OFSP-08-25 .98 (25.0)
.02 (0.5) .03 (0.8) .06 (1.6)OFSP-08-40 1.57 (40.0)ROFSP-40-40** 1.57 (40.0) .14 X .04 (3.6 X 1.0) .16 X .07 (4.0 X 1.8) .20 X .12 (5.0 X 3.0) 2
*Black (BLK), Brown (BRN), Green (GRN), Blue (BLU), Light Blue (LBL), Yellow (YEL), Red (RED), Pink (PNK), Orange(ORG), Violet (VIO), Gray (GRY) and White (WHT), available by Special Order only.
** Material: Outer Tube - Heatshrink 3:1 Ratio Cross-Linked Modified Polyolefin; INNER TUBE - Modified PE CopolymerAdhesive; ROD - Ceramic • Color: Clear
Material: Polypropylene • Color: RedStandard Pack: 100 per bag
A Europlus/Richco product
DISTRIBUTION BOX/DRAWER-FIBER
10 773-539-4060 Samples: 1-800-621-1892
OFFM/OFFM-MK2Optical Fiber Flat Manifold
6.906.90
13.5013.50
42.0SUPPLIED WITH 900 MICRON PTFE TUBE IN 40M PULL OUT PACK.6.9
13.5
DescriptionThe Miniflex Optical Fiber Flat Manifold (OFFM) has the ability to breakoutand protect primary fiber from cable element tubing, ribbon fiber or a blownfiber unit. The input fiber tube is secured by a clamping system molded intothe product. Each output fiber is protected in a 900µm PTFE tube, alsosecured by a molded detail. Threading the fiber is achieved by the effectiveguide provided in the snap-on lid. Assembly of the manifold is made easy bya simple “lay-through” design, which prevents fiber kinking or breakage.Installing fiber is easy, clean, neat and extremely compact while stillcontrolling all bend radii. Mounts with the self-adhesive pad provided or bythe integral screw holes, which give the ability to stack.Features• Internal Fiber Bend Control: 30mm (1.2") radii minimum• Maximum of 12 fibers• Ability to stack• Cable element tubing, ribbon fiber or blown fiber unit• Fiber threading guide system in lid
Miniflex technology manufactured byRichco – Patented
Dimensioned in millimeters
Dimensioned in millimeters
Features• Supplied with adhesive ribbon fiber adapter to
accept ribbon fiber• Molded detail that secures 900 micron PTFE
tubing is separate from body and cover for easeof handling
4.6
19.9
1.3/1.35
A-A
Ø6
.5
Ø4
.0/4
.1
Ø5
.0AA
Ø0.9+0-0.05
EFA70 07 001Strain Relief Boot - 900 Micron Fiber
A Europlus/Richco productFeatures• Provides added protection to 900 micron
fiber while routing through a hole Material: Thermoplastic ElastomerPart Number Contents Color Std. Pack
EFA70 07 001 Strain Relief Boot Black 500
Material: Glass-filled PBT - (UL 94 V0) Color: Charcoal Grey
Part Number Standard Pack: 10/bagH L W
OFFM-4-1 (4 tubes, 1 meter long per manifold)
.25(6.5mm)
2.59(66.0mm)
.51(13.0mm)
OFFM-6-1 (6 tubes, 1 meter long per manifold)OFFM-8-1 (8 tubes, 1 meter long per manifold)OFFM-8-2 (8 tubes, 2 meters long per manifold)OFFM-1-12 (1 coil, 120 meters long per bag of 10)
Material: Poly Tetra Flouro Ethelene (UL 94V0)Color: Natural
Standard Pack: 120 meter coil per bagPart No.
PTFE-1-120-NAT
Material: 6% Glass Reinforced PBT UL94 V0 RatedColor: Charcoal Grey
Standard Pack: 10 per bagPart No.
OFFM-MK2-10-40 GREY
DISTRIBUTION BOX/DRAWER-FIBER
11773-539-4060 Samples: 1-800-621-1892
M9 x .75 NUT
12.5
36.5
Ø
"A"
thru
Ø14
BODY
FIBER CAPTWO SUPPLIED WITH KIT,BOTH LOOSE AND TIGHT
BOOT
EFA52 XX ASSQuick Panel Mount Strain Relief Gland
Dimensioned in millimeters
Features• Provides added protection to
jacketed and bare fiber while routedthrough a hole
BODY
FIBER CAPTWO SUPPLIED WITH KIT,BOTH LOOSE AND TIGHT
BOOT
30
2.1
6.2
Ø10
EFA52 03 ASSQuick Panel Mount Strain Relief
Gland, Slot In Version
22.2
Ø6.
15
Ø3.
50
Ø3.
30
7.70
Ø
1.10
EFA70 01 XXX900 Micron Boot
Dimensioned in millimeters
Dimensioned in millimeters
A Europlus/Richco productA Europlus/Richco product
A Europlus/Richco product
9.3
12.3
Ø3.
10
Ø5.
10
Ø6.
10
Ø6.
7
25.0 Ø8.3
EFA70 02 XXXShort Buffered Fiber Boot
Dimensioned in millimeters
Material: Flame Retardant Polyamide 6 (UL 94V0)Part Number Standard Pack: 250 per bag
Contents “A” ColorEFA52 02 ASS Quick Panel Mount Strain Relief Gland for 3mm Fiber 3.5 BlackEFA52 05 ASS Quick Panel Mount Strain Relief Gland for 2mm Fiber 2.5 Black
Material: Flame Retardant Polyamide 6 (UL 94V0)
Part Number Standard Pack: 250 per bagContents Color
EFA52 03 ASS Quick Panel Mount Strain Relief Gland - Slotted Black
Material: Thermoplastic Elastomer
Part Number Standard Pack: 500Contents Color
EFA70 01 001
900 Micron Boot
BlackEFA70 01 002 BlueEFA70 01 003 GreenEFA70 01 004 RedEFA70 01 005 White
Material: Flexible, Flame-Retardant PVC
Part Number Standard Pack: 500Contents Color
EFA70 02 001
Short Buffered Fiber Boot
BlackEFA70 02 002 GreenEFA70 02 003 BeigeEFA70 02 004 Red
A Europlus/Richco product
DISTRIBUTION BOX/DRAWER-FIBER
12 773-539-4060 Samples: 1-800-621-1892
OFCC/OFCGOptical Fiber Coiling Clip
OFCP-50-19Chain Plate
Features• Two extruded clips snap into each other to
form a clip with a smooth, curved surfaceto accommodate fiber optic bundles
• OFCG-16 snap fits Part# OFCC-16-A-RTas shown
• Wall: .070 (1.8) typical
Features• Connect multiple OFCP's together to form
a "chain" for routing fiber.• Complete the circle for an excess fiber
spool.• Form a "Y" for breakout points.• All connections maintain a greater then
30mm bend radius.• .187" diameter center mounting hole per
OFCP for any standard Richco routingdevice.
OFCC-16-A-RT OFCG-16
Dimensioned in millimeters
Material: Rigid PVC, RMS-04; Adhesive, RMS-15Color: Black
Standard Pack: 100 per bag
Material: Nylon 6/6 Flame Retardant, RMS-19Color: White
Standard Pack Quantity: 500
DISTRIBUTION BOX/DRAWER-FIBER
13773-539-4060 Samples: 1-800-621-1892
Style 1TO SNAP LOCK INTO A .187±.003
(4.75±0.08) DIA. HOLE IN A .031-.079 (0.8-2.0) THICK PANEL
OFSBOptical Fiber Support Base
Features• Constructs a path for spooling fiber optic
cables• Designed for use in fiber optic patch
panels applications• Central hole for rivet or screw fixing if
needed• Use Richco rivet series SR-5XXX for rivetmounting• Can be used with Richco wire saddles and
twist loks; STL, WS, LWS• Base is available with or without tape• Has .187" (4.75mm) hole on legs to allow
for any number of Richco wiring products• Tape: Double-backed adhesive 1/32 thick,
RMS-15
Style 2 Style 3 Style 4
Style 5 Style 6
TO SNAP LOCK INTO A .312±.003 (7.92±0.08)
DIA. HOLE IN A .031-.079(0.8-2.0) THICK PANEL
TO SNAP LOCK INTO A.250±.003 (6.35±0.08)
DIA. HOLE IN A .031-.079(0.8-2.0) THICK PANEL
TO SNAP LOCK INTO A.307±.003 (7.80±0.08)SQUARE HOLE IN A
.031-.079 (0.8-2.0) THICK PANEL
TO SNAP LOCK INTO A.374±.003 (9.5±0.08)SQUARE HOLE IN A
.031-.079 (0.8-2.0) THICK PANEL
1/32 (0.8) THICKDOUBLE SIDEDADHESIVE TAPEW/RELEASE TAB
.98(25.0)
.75(19.0)
OFNSOptical Fiber Network Saddle
Features• No stress applied to fiber
upon entry• Smooth rounded corners• Six different mounting styles
Material: Nylon 6/6, RMS-01; Flame Retardant Nylon, RMS-19 • Color: Natural
Part No. Standard Pack: 10 per bagMounting Style
OFSB-4-85-01A Adhesive TapeOFSB-4-85-01 Screw MountOFSB-4-85-19A Adhesive TapeOFSB-4-85-19 Screw Mount
Color: NaturalPart No. Standard Pack: 1000 per bag
Nylon 6/6, RMS-01 Flame Retardant Nylon,RMS-19 “A” Ref. “B” Ref. “C” Ref. “D” Ref. Style
OFNS-13-187-01 OFNS-13-187-19
1.06 (26.8) .83 (21.2) .75 (19.0)1.11 (28.2)
1OFNS-13-312-01 OFNS-13-312-19 2OFNS-13-250-01 OFNS-13-250-19 4OFNS-13-S9.5M-01 OFNS-13-S9.5M-19 5OFNSB-13-01A-RT OFNSB-13-19A-RT 1.29 (32.7) 6OFNS-16-187-01 OFNS-16-187-19
1.35 (34.3) 1.13 (28.7) .99 (25.1)1.35 (34.4)
1OFNS-16-312-01 OFNS-16-312-19 2OFNS-16-S307-01 OFNS-16-S307-19 3OFNS-16-S9.5M-01 OFNS-16-S9.5M-19 5OFNSB-16-01A-RT OFNSB-16-19A-RT 1.53 (38.9) 6
USED WITH THESE RIVETSPart No. Hold Dia. Panel Thickness RangeSR-5045
.201-.205(5.1-5.2)
.059-.098 (1.5-2.5)SR-5055 .098-.138 (2.5-3.5)SR-5065 .138-.177 (3.5-4.5)SR-5075 .177-.217 (4.5-5.5)SR-5085 .217-.256 (5.5-6.5)SR-5095 .256-.295 (6.5-7.5)SR-5105 .295-.335 (7.5-8.5)
DISTRIBUTION BOX/DRAWER-FIBER
14 773-539-4060 Samples: 1-800-621-1892
OFEB-3-19Optical Fiber Expandable Bracket
Features• Designed to hold up to six .118" (3.0)
diameter fiber optic cables• Cable snaps into groove easily without
damaging fiber• Brackets connect easily to each other to
provide for additional cables
OFB3P-4-19Optical Fiber Bracket, 3mm,
Plug-In, 4 Slot
Features• Designed to hold up to eight 3mm
diameter fiber cables• Anti-rotation pin prevents fiber kinking due
to bracket turning in the mounting hole
Material: Flame Retardant Nylon RMS-19 • Color: NaturalStandard Pack: 1000 per bag
Adhesive Backing, RMS-15
Material: Nylon 6/6 Flame Retardant, RMS-19 • Color: NaturalStandard Pack: 1000 per bag
DISTRIBUTION BOX/DRAWER-FIBER
15773-539-4060 Samples: 1-800-621-1892
OFHB2-4A1-RT-19Optical Fiber Holder on Base, 2mm
Features• Designed to hold up to four 2mm diameter
fiber cables
OFB-BH-6-19Optical Fiber Bracket, Blind Hole
Features• Designed to hold up to six 2mm diameter
fiber cables
Dimensioned in millimeters
Material: Nylon 6/6, UL 94-V0, RMS-19 • Color: NaturalStandard Pack: 1000 per bag
Material: Nylon 6/6 Flame Retardant, RMS-19 • Color: NaturalStandard Pack: 1000 per bag
DISTRIBUTION BOX/DRAWER-CONNECTOR/ADAPTER
16 773-539-4060 Samples: 1-800-621-1892
EFA02 05 XXXFC ConnectorDust Cap
EFA02 12 001ST ConnectorDust Cap
EFA02 15 XXXSC ConnectorDust Cap Flexible
Dust Cap Tie
EFA02 Dust Caps with Flexible Ties
Dust Caps with Flexible Ties
Dimensioned in millimeters
Features• Provides environmental protection to
connectors and adapters• Offered in various colors and materials• Flexible tie keeps dust cap from being lost
when not in use
A Europlus/Richco product
EFA02 09 001FC Adapter Dust Cap
EFA02 04 001SMA Adapter Dust Cap
EFA02 07 001DIN Adapter Dust Cap
2.5"
CHAIN
EFA02 10 001ST Adapter Dust Cap
EFA02 27 001FC Connector Dust Cap
EFA02 14 XXXSC Adapter Dust Cap
EFA02 27 ASS \ EFA02 50 ASS
Eyelet
EFA02 Dust Capswith Metal Chains
Dust Cap with Metal Chains
Dimensioned in millimeters
Features• Stainless steel dust caps for harsh
environments• Chain keeps dust cap from being lost
when not in use• Individual dust caps, shown here as
EFA02 XX 001, are designed with ahole for mounting the retaining chainand are for reference only (exceptEFA02 14) as the hole would exposethe adapter/connector. The mountinghole for the EFA02 14 is a blind holeand does not expose theadapter/connector and therefore couldbe used on its own
TypicalAssembly
Material: Cap - High Density Polyethylene; Tie - Flexible PVC
Part No. Standard Pack: 250 Per BagColor Description
EFA02 05 001 Black FC Connector Dust CapEFA02 05 004 Green FC Connector Dust CapEFA02 05 005 Red FC Connector Dust CapEFA02 05 006 Blue FC Connector Dust CapEFA02 05 ASS Black EFA02 05 Dust Cap With TieEFA02 05 ASG Green EFA02 05 Dust Cap With TieEFA02 05 ASR Red EFA02 05 Dust Cap With TieEFA02 05 ASB Blue EFA02 05 Dust Cap With TieEFA02 12 001 Black ST Connector Dust CapEFA02 12 ASS Black EFA02 12 Dust Cap With TieMaterial: Cap - PVC; Tie - Flexible PVCEFA02 15 001 Black SC Connector Dust CapEFA02 15 002 Blue SC Connector Dust CapEFA02 15 003 Green SC Connector Dust CapEFA02 15 ASS Black EFA02 15 Dust Cap With TieEFA02 15 ASB Blue EFA02 15 Dust Cap With TieEFA02 15 ASG Green EFA02 15 Dust Cap With Tie
Material: Cap - Stainless Steel; Chain - Stainless Steel
Part No. Color Description Std. Pack
EFA02 04 ASS Silver EFA02 04 Dust Cap With Chain
100
EFA02 07 ASS Silver EFA02 07 Dust Cap With ChainEFA02 09 ASS Silver EFA02 09 Dust Cap With ChainEFA02 10 ASS Silver EFA02 10 Dust Cap With Chain
EFA02 27 002 Silver FC Connector Dust Cap withoutmounting hole
EFA02 27 ASS Silver EFA02 27 Dust Cap With ChainEFA02 50 ASS Silver EFA02 10 Dust Cap With ChainMaterial: Cap - Santoprene; Chain - Stainless SteelEFA02 14 001 Black SC Adapter Dustcap
250EFA02 14 004 Blue SC Adapter Dustcap
EFA02 14 ASS Black/Silver EFA02 14 001 Dustcap With Chain
A Europlus/Richco product
Flexible Dust Cap Tie(Color: Black)
Typical Assembly
DISTRIBUTION BOX/DRAWER-CONNECTOR/ADAPTER
17773-539-4060 Samples: 1-800-621-1892
Ø12
M8 x 0.75
EFA02 03 XXXFC Adapter Dust Cap
Ø10
M8 x 0.75 6g
EFA02 06 XXXFC Connector Dust Cap
Dimensioned in millimeters Dimensioned in millimeters
Features• Provides environmental protection to
connectors and adapters
A Europlus/Richco product
A Europlus/Richco product
Dimensioned in millimeters
Ø2.3
1.5
Ø4.5Ø12
M8 x 0.75
EFA02 18 XXXFC Adapter Dust Cap
Ø2.
30
1.5
Ø4.
50
Ø10
.00
EFA02 19 001ST Adapter Dust Cap
Dimensioned in millimeters
A Europlus/Richco product
A Europlus/Richco product
Material: High Density Polyethylene
Part No. Standard Pack: 500 per bagColor
EFA02 06 001 BlackEFA02 06 002 Blue
Material: High Density Polyethylene
Part No. Standard Pack: 500 per bagColor
EFA02 03 001 NaturalEFA02 03 002 BlackEFA02 03 003 GreenEFA02 03 004 WhiteEFA02 03 005 Red
Material: High Density Polyethylene
Part No. Standard Pack: 250 per bagColor
EFA02 18 001 BlackEFA02 18 002 RedEFA02 18 003 Green
Material: POM • Color: BlackStandard Pack: 250
Features• Provides environmental protection to
adapters• Molded-in “mushroom” head is perfect for
attaching retaining tie
DISTRIBUTION BOX/DRAWER-CONNECTOR/ADAPTER
18 773-539-4060 Samples: 1-800-621-1892
Pattern "Y"
Dim. XX
Dim. XXDim. XX
13.5
0
13.5
0
Ø8.90
Ø8.90
Ø7.0
Ø2.38
Ø2.38
Ø2.38
9.50
RAD 8.45
13.5
SQ
9.5
2
Pattern "Y"3
Pattern "Y"1
EFA02 XX YXXFlexible Dust Cap Tie
PART NUMBER ORDER CODE
FC Adapter Dust Cap XX Dim. of 55.00mmY Pattern 3
18EFA02 3 01
A Europlus/Richco product
Dimensioned in millimeters
Material: PVC Color : Black
Part No. Standard Pack: 250 per bagPattern “Y” Dim. XX
EFA02 XX 1011
31.75EFA02 XX 102 40.00EFA02 XX 103 55.00EFA02 XX 201
231.75
EFA02 XX 202 40.00EFA02 XX 203 55.00EFA02 XX 301
330.00
EFA02 XX 302 38.00EFA02 XX 303 50.50
Features• Flexible dust cap tie can be used with any
dust cap with a mushroom head such asEFA02 18/19 shown on page 17 andEFA02 05/12/15 on page 16
INSIDE LENGTH TOSHOULDER
(SEE TABLE)
WALL THICKNESSAT OPEN END(SEE TABLE)
INT
Ø(S
EE
TA
BLE
)EFA02 43 XXXFerrule Dust Cap
A Europlus/Richco productFeatures• Provides environmental protection for
SMA, ST and FC adapter ferrulesMaterial: PVC • Color: Black
Part No.Standard Pack: 500 per bag
Description Inside Length toShoulder (±2.0mm)
Internal Dia.(±0.10mm)
Wall Thicknessat Open End
EFA02 43 001 SMA Connector Adapter Dust Cap12.7
3.010.0 ± 0.25mmEFA02 43 002 ST Adapter Dust Cap
7.1EFA02 43 003 FC Adapter Dust Cap 8.0
Dimensioned in millimeters
9.5
7.5
Ø7
Ø2.2/2.4
EFA02 52 001Ferrule Only Dust Cap
Features• Provides environmental protection for
2.5mm diameter ferrules
A Europlus/Richco productMaterial: Thermoplastic Elastomer • Color: Black
Standard Pack: 500 per bagDimensioned in millimeters
Dimensioned in millimeters
DISTRIBUTION BOX/DRAWER-CONNECTOR/ADAPTER
19773-539-4060 Samples: 1-800-621-1892
420
38
21
A B
ØCØD
70
EFA02 One-Piece Dust Cap and Tie
One-Piece Dust Cap and Tie
Dimensioned in millimeters
A Europlus/Richco product
Dimensioned in millimeters
4 HOLES DIA 2.38
Ø8.9
9.50 TYP
13.5
0 S
Q
Ø7.00/7.25
1.0
Ø9.
0/9.
5
10.0
415
.54
17.5
4
55
4
.0
EFA02 35 001One-Piece ST Adapter
Dust Cap and Tie
A Europlus/Richco product
Material: PVC • Color: Black
Part No. Standard Pack: 250 per bagDescription “A” “B” “C” “D”
EFA02 08 ASS One-Piece Biconic Dust Cap and Tie 23.5 22.0 13.0 10.4EFA02 11 ASS One-Piece FC/ST Dust Cap and Tie 18.5 17.0 12.0 8.7EFA02 13 ASS One-Piece ST Connector Dust Cap and Tie 18.5 17.0 15.3 12.0
Material: Elastomer • Color: BlackStandard Pack: 250 per bag
EFA02 35 001
Features• Provides environmental protection to
various connectors with molded-onretaining tie
Features• Provies environmental protection to an ST
adapter with molded-on retaining tie
Ø5.00
4.30
10.0
0
Ø4.00
"A"
Ø5.00
Ø10
.00
20.30 112 CTRS 16.00
3.00
4.00
8.00
2.00
1.00
Features• Provides environmental protection to
2.5mm and 1.25mm diameter ferrules withmolded-on retaining tie
EFA02 50 XXX Ferrule Dust Capand Tie
Ferrule Dust Cap and Tie
A Europlus/Richco product
Dimensioned in millimeters
Material: Elastomer • Color: Black
Part No. Standard Pack: 500 per bag“A”
EFA02 50 001 2.50/2.45EFA02 50 002 1.25/1.20
DISTRIBUTION BOX/DRAWER-CONNECTOR/ADAPTER
20 773-539-4060 Samples: 1-800-621-1892
BPE-SC / BPE-ST-1-01Blanking Plug, O.F. Connector
Features• ST Series covers “Double-D,” “D” or round
hole cutouts for unused terminals in fiberoptic boxes
• SC Series covers rectangular hole cutoutsfor unused terminals in fiber optic boxes
• Both series used in a panel thicknessrange of .06 - .14 (1.4 - 3.5)
BPE-ST-1-01 BPE-SC
OFCA-SC/ST-01Optical Fiber Connector Cutout
Adaptor - SC/ST
Features• Converts a hole cut out for an SC
connector into a hole cut out for an STconnector
Dimensioned in millimeters
Material: Nylon 6/6, RMS-01Color: Black; other colors available by special order
Part No. Standard Pack: 1000 per bag“A” “B” “L”
BPE-SC-1-01 .87 (22.0).50 (12.8) .51 (13.0)
BPE-SC-2-01 .63 (16.0)BPE-SC-3-01 1.38 (35.0) 1.02 (25.8) 1.02 (26.0)
Material: Nylon 6/6, RMS-01 • Color: NaturalStandard Pack: 1000 per bag
21773-539-4060 Samples: 1-800-621-1892
DISTRIBUTION BOX/DRAWER-CONNECTOR/ADAPTER
RCCCConnector Cut-Out Cover
RCCC-10
RCCC-12
RCCC-14
Features• Supplied with stainless steel push-on clips
that allow for varying panel thicknesses• RCCC-10 for “D”-Sub Cutouts• RCCC-12 for Microribbon Cutouts• RCCC-14 for “D” Hole Cutouts
Material: ABS UL94V-0 • Color: BlackPart No. Standard Pack: 1000 per bag
“A” “B”RCCC-10-9 .98 (25.0) 1.23 (31.2)RCCC-10-15 1.31 (33.3) 1.56 (30.6)RCCC-10-25 1.85 (47.0) 2.10 (53.3)RCCC-10-37 2.50 (63.5) 2.75 (69.9)RCCC-10-50 2.40 (61.1) 2.66 (67.6)RCCC-12-14 1.42 (36.0) 1.74 (44.3)RCCC-12-24 1.84 (46.8) 2.17 (55.1)RCCC-12-36 1.35 (59.7) 2.68 (68.1)RCCC-12-50 2.95 (74.9) 3.28 (83.2)RCCC-12-64 3.54 (90.0) 3.87 (98.4)
Material: ABS UL94 V-0 • Color: Black
Part No. Standard Pack: 1000 per bag“A” “B” “C” “D” “H”
RCCC-14-11.375 (9.5)
.187 (4.7) .155 (3.9).125 (3.2)
.47 (11.9)
RCCC-14-12 .245 (6.2) .215 (5.5)RCCC-14-13 .276 (7.0) .235 (6.0)RCCC-14-21
.625 (15.9).360 (9.1) .310 (7.9)
.252 (6.4)RCCC-14-22 .430 (10.9) .375 (9.5)RCCC-14-23 .495 (12.6) .430 (10.9)RCCC-14-31
.812 (20.6).625 (15.9) .520 (13.2) .58 (14.7)
RCCC-14-32 .750 (19.1) .630 (16.0)
22 773-539-4060 Samples: 1-800-621-1892
DISTRIBUTION BOX/DRAWER-CONNECTOR/ADAPTER
A-A
A A
27.4
7976
12.8
EFB02 XX ASS8-Way SC Adapter
Dimensioned in millimeters
Features• Facilitates compact placement of up to
eight SC connectors• Stackable to allow up to 16 SC
connectors
A Europlus/Richco product
SLPL/SLPB/SLGSnap Latch
LATCHED POSITION
PLUNGER HEAD STYLES
MINI GRIP
SLPB-1L ~ SLPB-4L SLPB-1M ~ SLPB-4M SLPL-1L ~ SLPL-4L
EASY GRIP
NOTE:Plunger and Mating Grommet sold separately
Material: Plunger- Nylon 6, RMS-120; Grommet - Polycarbonate, RMS-72 • Color: Black or White. Add “-B” for black, “-W” for white
GrommetNo.
GrommetDash No.
“W” ± .012(± 0.3)
“H” ± .008(± 0.2) “L” Ref.
RemovablePanel
Thickness“T” max.
Total PanelThickness “T1”
min.-max.
RemovablePanel HoleDia. Range
“DR”
Fixed PanelHole Dia.
Range “DF”
MatingPlunger No.
AlternateMating
Plunger No.
Plunger DashNo.
SLG
SL
.425 (10.8) .079 (2.0)
.339 (8.6) .043 (1.1) .059-.145 (1.5-3.7)
.295-.303(7.5-7.7)
.315-.323(8.0-8.2) SLPL SLPB
1L1L .354 (9.0) .063 (1.6) .079-.165 (2.0-4.2)2L .394 (10.0) .098 (2.5) .118-.205 (3.0-5.2) 2L3L .461 (11.7) .161 (4.1) .181-.272 (4.6-6.9) 3L4L .508 (12.9) .209 (5.3) .228-.315 (5.8-8.0) 4L1M
.335 (8.5) .071 (1.8)
.315 (8.0) .043 (1.1) .059-.146 (1.5-3.7).234-.240(5.95-6.1)
.250-.256(6.35-6.5) SLPB —
1M2M .335 (8.5) .063 (1.6) .079-.165 (2.0-4.2) 2M3M .374 (9.5) .098 (2.5) .118-.205 (3.0-5.2) 3M4M .433 (11.0) .161 (4.1) .181-.272 (4.6-6.9) 4M
Material: Liquid Crystal Polymer
Part No. Standard Pack: 10 per bagColor Sleeve Material
EFB02 02 ASS Beige Phosphor BronzeEFB02 03 ASS Blue
CeramicEFB02 04 ASS GreenEFB02 05 ASS Black
23773-539-4060 Samples: 1-800-621-1892
NOTES