fiber optic connectors issued 4-02 - brandsma-bv.nl · expanded beam fiber optic products catalog...

Fiber Optic ConnectorsCatalog 1308940

Issued 4-02

Table of Contents

Products for Aerospace and Dimensions are in inches and Dimensions are shown for Technical Support — www.tycoelectronics.comDefense Applications millimeters unless otherwise reference purposes only. Refer to inside back cover.

specified. Values in brackets Specifications subject to change.are metric equivalents.

63

Expanded Beam Fiber Optic Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 65

Connector/Cable Assembly Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Pro Beam Connector and Pro Beam Jr. Expanded Beam Connectors and CableAssemblies for Field-Deployable Communications

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Typical Dimensions for Pro Beam Jr. Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Typical Dimensions for Pro Beam Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Pro Beam Connector and Pro Beam Jr. Connector Accessories

Cable Adapter Kits and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Reels and Reel Stands for Field-Deployable Cable Assemblies . . . . . . . . . . . . . . . . . . .71

Pro Beam/Pro Beam Jr. Connector Kit and Component Cross Reference . . . . . . . . .72

ARINC 600 and ARINC 404 Connectors with Expanded Beam Fiber Optic Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73-75

2

Fiber Optic Connectors

Note:For the Expanded Beam Product Family,consult Tyco Electronics for Designguidance & production availability.

Expanded Beam Fiber Optic ProductsCatalog 1308940

Issued 4-02

Introduction



64

Product Facts■ ARINC 600 and 404

connectors, with inserts/holder blocks designed forMini-Expanded Beam inserts— up to 128 channels

■ MIL-C-38999 Series III shellsize 13 and 11 style circularconnectors — Cableassemblies up to 4 fibers

■ Pro Beam Connector andPro Beam Jr. Connectorfield-deployableinterconnects

■ Use 1 to 4 channel expandedbeam inserts

■ Tactical cables, cable reels,man-packs

■ Cable assembly andtermination services

■ Non-contacting method ofmating optical fibers

■ No wear on fiber opticinterface; Very vibrationresistant

■ Easy alignment for low-loss,repeatable performance

■ Consistent overall optical“link budget”

■ Low sensitivity to thermalfluctuations and interfacecontamination

■ Repeatable low-lossperformance in harshenvironments

■ Lenses expand, then focusand collimate light; Housedin high strength, highprecision connectors

■ Easy to handle, easy toclean. Durable connectionthat is more resistant todirt/debris

■ Common insert for 1- through 4-channels

■ Allows modularity for up to 128 optical channels(ARINC 600 size 3)

■ Singlemode or multimode

■ Common 850, 1300, 1310,or 1550 nm wavelengths

Fiber Optic interconnect/cable system usingExpanded Beam technology,which physically expandsand collimates transmissionsignal into an optical beamover 14 times its originaldiameter (the cross sectionalarea of the light beamincreases over 200 times formultimode optical signals.For singlemode signals, thecollimated beam is over 45times its original diameter

and the cross-sectional areaof the light beam increasesover 2,000 times.). It is thenrefocused back down ontothe core of the receivingfiber. This concept providesease of alignment and low sensitivity to thermalchanges and contamination.High strength, precision con-nector housings enhance adurable connection, optimiz-ing low loss and repeatableperformance.

Suitable for aerospace,avionics, field-deployablecommunications, marineship-to-shore applications,security systems, mobilediagnostic units, oil and gasexploration and other harshenvironment applicationsdemanding strength, durability and reliable performance in conditions of multiple coupling/decou-plings, blindmate situations,and high vibration.



Issued 4-02

Introduction (Continued)



65

2


Expanded Beam Principle

Expanded Beam Avionics-Related Standardsand Specifications for ARINC 763 and 664

ARINC 763 — AvionicsNetwork Server SystemAMP ARINC 600 Connectors aredesigned to meet/exceed 100 Base-FXEthernet LAN applicationsNetwork Server Unit (NSU) — canuse ARINC 600 Size 1 connector with upto 8 Expanded Beam fiber optic channels(two Mini-Expanded Beam inserts incavity C)Server Interface Unit (SIU) — canuse ARINC 600 Size 3 connector with upto 16 Expanded Beam fiber optic chan-nels (four Mini-Expanded Beam insertsin cavity F)Integrated Network Server Unit(INSU) — can use ARINC 600 Size 3connector with up to 16 Expanded Beamfiber optic channels (four Mini-ExpandedBeam inserts in cavity F)

ARINC 664 — Aircraft DataNetworkAMP ARINC Connectors with Mini-Expanded Beam inserts will meet/exceedall 100 Base-FX Ethernet LAN applica-tions

■ Unique patented ModularDesign, for use withmultimode and singlemodefiber

■ Rugged hermaphroditicconstruction (i.e., sameinsert mates to each other)

■ Three different insert sizes,up to four channels per insert

Expanded Beam Inserts■ Mini-Expanded Beam insert

for multi-channel smallform factor — the smallestexpanded beam multi-channel insert in theindustry, an AMP exclusive

■ Physically non-contactingmating conditions; no wear

■ Easy to terminate and easyto clean

■ Simple terminationprocedure

■ Low transmission loss

From left to right: Pro Beam insert, Pro Beam Jr. Expanded Beam insert,

Mini-Expanded Beam insert.

■ Light is expanded,collimated, and transmittedacross an air gap

■ Ball lens expands cross-sectional area of light over200 times for multimodeand over 2000 times forsinglemode



Issued 4-02

Connector/Cable Assembly Nomenclature



66

To define a Pro Beam Connector, Pro Beam Jr. Connector, 38999Expanded Beam Connector, or insert for ARINC Connector:The first seven items define the connector and its cable adapter kit requirements.

Connector (Pro Beam Connector, Pro Beam Jr. Connector, 38999, or Mini-EB insert)

Number of Channels (1 through 4)Singlemode or MultimodeConnector Type — Plugs or Bulkheads for Pro Beam Connector and Pro Beam

Jr. Connector; Plugs or Receptacles for 38999.Mini-EB insert for ARINC ConnectorFor other items, this should be “X”.

Wavelength — 850 nm or 1300 nm for Multimode use, 1310 nm or 1550 nm for Singlemode use. Custom capability, also.

Cable Diameter (mm) — Used to define the proper cable adapter kit forPro Beam Connector and Pro Beam Jr. Connectors.This value should be “00” for all other connectors.

Cable Adapter Kit — For Pro Beam Connector and Pro Beam Jr. Connectors;three versions for bulkheads, one for plugs. For otheritems, this should be “X”.

To define an Expanded Beam Cable Assembly:All items at the left are used to define the connector/insert/ferrule on the “A” end. To define the cable:

*Cable Type — Indicates if tactical/field cable is needed. Terminology based onfield cable from Optical Cable Corporation.

Number of Fibers — May indicate if multiple connectors/inserts/ferrules areneeded on either end.

Cable LengthField-Deployable Reel Size — Determines the type of reel for field use.Connector, B End — Provides option for defining different connector, if not the

same as the “A” end.

**Note:For the Expanded Beam Product Family,consult Tyco Electronics for Designguidance & production availability.

**

****

** ****

Pro Beam Connector and Pro Beam Jr. Expanded Beam Connectorsand Cable Assemblies for Field-Deployable Communications

Catalog 1308940Issued 4-02

Introduction



67

2


Connectors and Cable AssembliesProduct Facts■ Singlemode and multimode

connectors with provenhigh-performance duringfield use

■ Easy termination suitablefor field use

■ Use 1 to 4 channelExpanded Beam inserts

■ Cable connector plugs,standard bulkhead (d-holecut out) and flange-mountbulkhead

■ Cable connector plugsprovide protection fromharsh environments

■ Cable adapter kits forbulkheads — standard,standard with boot,environmentally sealed with boot

■ Descriptive nomenclaturecan be used to defineconnector and cableassembly requirements

■ Spare parts are available

■ Pro Beam Connector andPro Beam Jr. Connectors areintermateable with otherExpanded Beam Connectorsin the market

Cable Assemblies and AccessoriesProduct Facts■ Ruggedized cable

assemblies custom-tailoredfor field use in harshenvironments

■ Heavy-duty lightweightcable reel organizes andprotects connectors andcable for easy pay-out andsafe storage

■ Reels available in 500meter and 2000 meterversions

■ Options for 500 meter reelsinclude special Man-Packharnesses, a separate reelstand, or a combination reeland reel stand

Plug Bulkhead



Typical Dimensions for Pro Beam Jr. Connectors



68

Performance SpecificationsOptical, MultimodeInsertion Loss, Typical — 0.3 - 0.8 dB @ 1300 nm

Optical, Singlemode VersionInsertion Loss, Typical — 0.4 - 0.9 dB @ 1310 nmReturn Loss — > 32 dB @ 1310 nm

MechanicalVibration, Sinusoidal — 10 - 500 Hz,3 directions; 0.75 mm amplitude @ 10gaccelerationBump — 4,000 Bumps, 3 directions @40g accelerationFree Fall — 500 falls on concrete;Severity 1.2 mCoupling Endurance — 3,000 couplingsWeight — Plug — 123 grams, typicalD-Hole bulkhead — 102 grams, typical

TemperatureOperational Temperature — -40°C/+85°CStorage Temperature — -55°C/+85°CTemperature, Cyclic — -55°C/+85°CDamp Heat, Cyclic — +55°C

CorrosionSalt — ConformsAcid — Conforms

ImmersionWater — 5 m depthMud — Conforms

PressureLow Pressure — 25 kPa @ -55°C

Flange Mount Bulkhead,Standard Cable Adapter

Cable Connector, Plug

Standard Cable Adapter, with Boot

Environmentally Sealed Cable Adapter, with Boot

D-Hole Bulkhead, Standard Cable Adapter



Typical Dimensions for Pro Beam Connectors



69

2


Performance SpecificationsOptical, MultimodeInsertion Loss, Typical — 0.5 - 1.0 dB @ 1300 nm

Optical, SinglemodeInsertion Loss, Typical — 0.5 - 1.0 dB @ 1310 nmReturn Loss — > 32 dB @ 1310 nm

MechanicalVibration, Sinusoidal — 10 - 500 Hz,3 directions; 0.75 mm amplitude @ 10gaccelerationBump — 4,000 Bumps, 3 directions @40g accelerationFree Fall — 500 falls on concrete;Severity 1.2 mCoupling Endurance — 3,000 couplingsWeight — Plug — 290 grams, typicalChassis bulkhead — 150 grams, typical

TemperatureOperational Temperature — -40°C/+85°CStorage Temperature — -55°C/+85°CTemperature, Cyclic — -55°C/+85°CDamp Heat, Cyclic — +55°C

CorrosionSalt — ConformsAcid — Conforms

ImmersionWater — 5 m depthMud — Conforms

PressureLow Pressure — 25 kPa @ -55°C

Front View

Front ViewPanel Cutout

Cable Connector, Plug

D-Hole Bulkhead with Standard Cable Adapter

Also Square-flange Mount available, per drawing 1516133(reference drawing for dimensions)

For Pro Beamdesigns, consultTyco Electronicsfor availability.

Pro Beam Connector and Pro Beam Jr. ConnectorAccessories


Cable Adapter Kits



70

Use with the Pro BeamConnector and Pro Beam Jr.Connector and CableAssemblies

Composition of Typical Kits:

Bulkhead, Standard Bulkhead, Standard Bulkhead, EnvironmentallyCable PlugCable Adapter Cable Adapter with Boot Sealed Cable Adapter,

with bootScrew X XExtension X XCrimp Sleeve X X X XSupport Tube X X X XBoot X X XFlat Washer X XCable Seal X XRear Extension XJam Nut XO-ring X

For Pro Beam Connector Plug

Cable Dia. AMP Part No.(Max.).222 1515801-1*5.65.201 1515940-1*5.10

For Pro Beam Connector Bulkhead

Cable Dia. Style AMP Part No.(Max.).222 Standard Cable Adapter 1515724-2*5.65.197 Standard Cable Adapter 1515847-1*5.00

For Pro Beam Jr. ConnectorPlug

Cable Dia. AMP Part No.(Max.).122 1515814-13.10.142 1515781-33.60.161 1515848-24.10.181 1516147-14.60.201 1515834-25.10.222 1515827-25.65.240 1515859-36.10.264 1588116-16.70

For Pro Beam Jr. Connector Bulkhead

Cable Dia. Style AMP Part No.(Max.).087 Standard Cable Adapter, 1515878-12.20 with Boot.122 Standard Cable Adapter 1515791-23.10.126 Standard Cable Adapter, 1515810-33.20 with Boot.142 Standard Cable Adapter 1515808-13.60.161 Environmentally Sealed Cable 1515848-24.10 Adapter, with Boot.165 Standard Cable Adapter, 1515839-24.20 with Boot.201 Standard Cable Adapter 1515835-25.10.222 Standard Cable Adapter 1515829-15.65.240 Standard Cable Adapter 1515796-26.10

4 x .118 Standard Cable Adapter 1515749-14 x 3.00

Available from TycoElectronics are componentsfor spare parts and repair.These items include boots,seals, protective caps,crimp support tubes andferrule assemblies withsprings. Contact TycoElectronics.

Protective CapsDescription Part Number

Standard cap, for D-Hole Bulkhead, 1515868-1Pro Beam Jr. ConnectorsStandard cap, for Flange-mount Bulkhead, 1515787-2Pro Beam Jr. Connectors

Standard cap, for connector plug, 1515867-1Pro Beam Jr. ConnectorsStandard cap, for D-Hole Bulkhead, 1515726-2Pro Beam ConnectorsStandard cap, for connector plug, 1515799-1Pro Beam Connectors

Standard cap, for Flange-mount Bulkhead, 1515769-1Pro Beam Connectors

Spare Parts

*Consult Tyco Electronics for availability.

Pro Beam Connector and Pro Beam Jr. ConnectorAccessories


Typical Reels and Reel Stands for Field-Deployable Cable Assemblies



71

2


Cable Reels

Reel Capacity Max. Width Weight Notes/Description AMP(2-fiber) Diameter (kg) Part No.

13.78 11.42 Reel & Reel Stand Combination.500 meters 350 290 6.4 Reel can be detached from stand 1515900-1*

without tools.

500 meters 13.78 12.80 15.5 Fits on Man-Pack or Reel Stand 1515756-1*350 325

2000 meters 21.65 17.91 58.5 For fixed installation on vehicle 1515757-1*550 455

Accessories

DescriptionDimension Weight AMP

Height Width Length (kg) Part No.

Reel Stand* 15.35 15.35 14.76 2 1515758-1**390 390 375

Man-Pack Harness* 19.69 14.37 14.37 4.1 1515759-1**500 365 365

*For use with Part Number 1515756-1 reel.

Part Number 1515900-1 Part Number 1515757-1Part Number 1515756-1

Reel StandPart Number 1515758-1

Man-Pack HarnessPart Number 1515759-1

*Consult Tyco Electronics for availability.

**Consult Tyco Electronics for availability.


Issued 4-02

Pro Beam/Pro Beam Jr. Connector Kit and Component Cross



72

Descriptive AMP Connector No. of Mode Type WavelengthNomenclature Part No. ChannelsJ1SPB 1515780-2 Pro Beam Jr. 1 Singlemode Cable Plug 1310 nmJ1SPC 1588104-1 Pro Beam Jr. 1 Singlemode Cable Plug 1550 nmJ1MPA 1588106-1 Pro Beam Jr. 1 Multimode Cable Plug 850 nmJ1MPB 1588108-1 Pro Beam Jr. 1 Multimode Cable Plug 1300 nmJ1SRB 1515789-3 Pro Beam Jr. 1 Singlemode Bulkhead 1310 nmJ1SRC 1588105-1 Pro Beam Jr. 1 Singlemode Bulkhead 1550 nmJ1MRA 1588107-1 Pro Beam Jr. 1 Multimode Bulkhead 850 nmJ1MRB 1588109-1 Pro Beam Jr. 1 Multimode Bulkhead 1300 nm

J1SBB 1515790-2 Pro Beam Jr. 1 Singlemode Bulkhead, 1310 nmFlange MountJ2MPS 1515832-2 Pro Beam Jr. 2 Multimode Cable Plug 850/1300 nmJ2MPB 1515836-2 Pro Beam Jr. 2 Multimode Cable Plug 1300 nmJ2MPA 1588106-2 Pro Beam Jr. 2 Multimode Cable Plug 850 nmJ2MRS 1515833-2 Pro Beam Jr. 2 Multimode Bulkhead 850/1300 nmJ2MRB 1515837-2 Pro Beam Jr. 2 Multimode Bulkhead 1300 nmJ2MRA 1588107-2 Pro Beam Jr. 2 Multimode Bulkhead 850 nmJ2SPB 1515850-1 Pro Beam Jr. 2 Singlemode Cable Plug 1310 nmJ2SPC 1588104-2 Pro Beam Jr. 2 Singlemode Cable Plug 1550 nmJ2SRB 1515852-1 Pro Beam Jr. 2 Singlemode Bulkhead 1310 nmJ2SRC 1588105-2 Pro Beam Jr. 2 Singlemode Bulkhead 1550 nmJ3SPB 1515805-1 Pro Beam Jr. 3 Singlemode Cable Plug 1310 nmJ3SPC 1588104-3 Pro Beam Jr. 3 Singlemode Cable Plug 1550 nm

J3SBB 1515795-3 Pro Beam Jr. 3 Singlemode Bulkhead, 1310 nmFlange MountJ3SRB 1588110-1 Pro Beam Jr. 3 Singlemode Bulkhead 1310 nmJ3SRC 1588105-3 Pro Beam Jr. 3 Singlemode Bulkhead 1550 nmJ4MPB 1515826-2 Pro Beam Jr. 4 Multimode Cable Plug 1300 nmJ4MPA 1588106-3 Pro Beam Jr. 4 Multimode Cable Plug 850 nmJ4MPS 1588111-1 Pro Beam Jr. 4 Multimode Cable Plug 850/1300 nmJ4MRS 1515748-1 Pro Beam Jr. 4 Multimode Bulkhead 850/1300 nmJ4MRB 1515828-2 Pro Beam Jr. 4 Multimode Bulkhead 1300 nmJ4MRA 1588107-3 Pro Beam Jr. 4 Multimode Bulkhead 850 nmJ4SPB 1515851-1 Pro Beam Jr. 4 Singlemode Cable Plug 1310 nmJ4SPC 1588104-4 Pro Beam Jr. 4 Singlemode Cable Plug 1550 nmJ4SRB 1515853-1 Pro Beam Jr. 4 Singlemode Bulkhead 1310 nmJ4SRC 1588105-4 Pro Beam Jr. 4 Singlemode Bulkhead 1550 nmP2MPB — Pro Beam 2 Multimode Cable Plug 1300 nmP2MPA — Pro Beam 2 Multimode Cable Plug 850 nmP2MRB — Pro Beam 2 Multimode Bulkhead 1300 nmP2MRA — Pro Beam 2 Multimode Bulkhead 850 nmP2MBB — Pro Beam 2 Multimode Bulkhead, 1300 nm

Flange MountP2SPB — Pro Beam 2 Singlemode Cable Plug 1310 nmP2SPC — Pro Beam 2 Singlemode Cable Plug 1550 nmP2SRB — Pro Beam 2 Singlemode Bulkhead 1310 nmP2SRC — Pro Beam 2 Singlemode Bulkhead 1550 nmP4MPB — Pro Beam 4 Multimode Cable Plug 1300 nmP4MPA — Pro Beam 4 Multimode Cable Plug 850 nmP4MRB — Pro Beam 4 Multimode Bulkhead 1300 nmP4MRA — Pro Beam 4 Multimode Bulkhead 850 nmP4MBB — Pro Beam 4 Multimode Bulkhead, 1300 nm

Flange MountP4SPB — Pro Beam 4 Singlemode Cable Plug 1310 nmP4SPC — Pro Beam 4 Singlemode Cable Plug 1550 nmP4SRB — Pro Beam 4 Singlemode Bulkhead 1310 nmP4SRC — Pro Beam 4 Singlemode Bulkhead 1550 nm

ARINC 600 and 404 Connectors with Expanded Beam Fiber Optic Inserts


Introduction



73

2


Product Facts■ For Mini-Expanded Beam

and Jr. Expanded Beaminserts

■ Insert holders designed toARINC 600, Supplement 13or to specific customerneeds

■ For use in 100 base-FXEthernet LAN applications perARINC 664 and ARINC 763

■ Drop-In Insert Holders utilizeStandard ARINC 404 and 600Retainers■ Hard Stop on Plug Side■ Spring-Loaded Stop on

Receptacle Side■ Captive Hardware

■ Facial Sealing — Optional■ Bonded to Receptacle

Block Mating Face■ Raised Collar Seal around

Optics Insert compressesagainst Chamfer on PlugBlock Mating Face ARINC 600 Insert Holders for Mini-Expanded Beam Contacts

Size 1Power Cavities

Size 1Signal Cavities

ARINC 600, 1 Position1MP

ARINC 600, 2 Position2MP

ARINC 600, 1 Position1MS

ARINC 600, 2 Position2MS

ARINC 600, 3 Position

Size 2 / 3 Power and Signal Cavities

ARINC 600, 4 Position ARINC 600, 6 Position6MS





74

ARINC 600 Insert Holders for Jr. Expanded Beam Contacts

Size 2 & 3Signal Cavities

Size 2 & 3Power Cavities

ARINC 600, 1 Position1JS



ARINC 600, 1 Position1JP

ARINC 600, 2 Position2JP

ARINC 404 Insert Holders for Jr. Expanded Beam Contacts

ARINC 404 Insert Holders for Mini-Expanded Beam Contacts

ARINC 404, 1 PositionJ1

ARINC 404, 2 PositionJ2

ARINC 404, 1 Position ARINC 404, 2 Position ARINC 404, 3 PositionM3



ARINC 600 Insert Holders for Mini-Expanded Beam Contacts



75

2


Typical Layout for Plug

Typical Layout for Receptacle

Fiber Optic ConnectorsCatalog 1308940

Issued 4-02

Engineering Notes



76

fiber optic connectors issued 4-02 - brandsma-bv.nl · expanded beam fiber optic products catalog...

Documents