fenixen masterbatches
DESCRIPTION
ÂTRANSCRIPT
polimeri.bg 1
Продуктовата гама фениксен включва в състава си мастербачи, филери (CaCO3) и добавки.
Тези продукти са разработвани повече от 5 години в заводите и лабораториите на Мегапорт феникс Пластик и Полимери България в градовете софия, Велико Търново и Търговище. натрупаният опит през този период ни дава основание да вярваме, че тези продукти могат да са добър помощник във вашето производство. имаме възможност да тестваме и произвеждаме мастербачи по мостра на клиента или според спецификация на клиента, с гарантирано качество на крайния продукт.
Fenixen product portfolio by incorporating masterbatches, fillers (CaCO3) and additives. These products have been developed for over
5 years in factories and laboratories Megaport Fenixen Plastic and Polymers Bulgaria in Sofia, Veliko Tarnovo and Targovishte. The experience gained during this period gives us reason to believe that these products can be a good assistant in your production.We are capable of testing and producing masterbatches using customer’s sample or according to customer’s specification, with guaranteed quality of the final product.
polimeri.bg 2
Всички фолиа в този каталог са с дебелина 50 микрона и съдържание от 95% LDPe и 5% от съответния продукт. изключение правят артикулите от група фениксен филер, там рецептата е отразена на съответната страница.
All films in this catalog are 50 microns and content of 95% LDPe and 5% of the product. exceptions are items from Fenixen FiLLer, there recipe is reflected on the page.
polimeri.bg
съдържание /COnTenT
Бели мастербачи .................................................................................................... 4 White masterbatches
черни мастербачи ................................................................................................. 9 BLACk masterbatches
цВеТни мастербачи ............................................................................................. 18 COLOr masterbatches
филер (CaCO3) ...................................................................................................... 28
FiLLer (CaCO3)
доБаВки ................................................................................................................ 37 аDDiTiVe
polimeri.bg 4
фениксен Бяло включва в състава си до 70% титаниев диоксид. В зависимост от процентното съотношение на белия мастербач се влага от 1% до 5% за постигане на желаната белота. основното предназначение е за тънки изделия от LDPe, HDPe и PP. носителят е LLDPe. Бялата гама във фениксен серията покрива пълните нужди за екструдиране на фолио и леене под налягане, бластване и ротационно леене. фениксен Бяло предлага артикули с до 70% основен пигмент.
WHiTe Fenixen by incorporating up to 70% titanium dioxide. Depending on the percentage of the pigment in the white masterbatch must be applied from 1% to 5% to achive the desired brightness in the final product. The main application is to thin products LDPe, HDPe, PP. The carrier is LLDPe. White range in Fenixen series covers the full needs for film extrusion and injection molding, blow molding and rotational molding. WHiTe Fenixen offers products with up to 70%, the main pigment.
polimeri.bg 5
Properties Specifications Range MethodPackaging & Storage
Food Approval
ApplicationsThe product is recommended
for use in the following applications*:
FW140
Carrier ResinLLDPE
(MFI 3 gr/10 min)Dispertions at
200 mesh (bar)< 6,0 OEE-8.2.4-01-08
The product comes in
regular pellet form and packed in
25 kg bags. The bags must be stored
indoors for a maximum of 12 month and in dry environ-ment of
approximate-ly 25ºC.
Fenixen FW140 is food
approved in conform.
This masterbatch offers a
convenient way to incorporate TiO
2
in thermoplastic, without dust con-tamination. It has prefect dispersion
and optimized flow properties,
resulting to maximum hiding power and easy processing. The product packag-ing specification
is 25 kg (with tolerance
limit of +/-100gr).
Blow Moulding: +
PigmentTitanium Dioxide
(40% TiO2)
Total Inorganic Content (%)
39.00 ± 2.28 OEE-8.2.4-01-06 Film/Sheet: +
Pigment Types Rutile Coated Volatile Content (%) <0.20 OEE-8.2.4-01-07 Injection Moulding: +Undertone Milky Bulk Density (gr/cm3) 1.110-1.210 ASTM D1895 Tapes: o
Other Additives No Pellet Visual Inspection Yes Thin Films: +
FW150
Carrier ResinLLDPE
(MFI 3 gr/10 min)Dispertions at
200 mesh (bar)< 5,0 OEE-8.2.4-01-08
Fenixen FW150 is food
approved in conform.
Blow Moulding: +
PigmentTitanium Dioxide
(50% TiO2)
Total Inorganic Content (%)
49.00 ± 2.25 OEE-8.2.4-01-06 Film/Sheet: +
Pigment Types Rutile Coated Volatile Content (%) <0.20 OEE-8.2.4-01-07 Injection Moulding: +Undertone Milky Bulk Density (gr/cm3) 1.130-1.230 ASTM D1895 Tapes: o
Other Additives No Pellet Visual Inspection Yes Thin Films: +
FW150
Carrier ResinLLDPE
(MFI 3 gr/10 min)Dispertions at
200 mesh (bar)< 2,0 OEE-8.2.4-01-08
Fenixen FW170 is food
approved in conform.
Blow Moulding: +
PigmentTitanium Dioxide
(70% TiO2)
Total Inorganic Content (%)
70.00 ± 2.10 OEE-8.2.4-01-06 Film/Sheet: +
Pigment Types Rutile Coated Volatile Content (%) <0.20 OEE-8.2.4-01-07 Injection Moulding: +Undertone Milky Bulk Density (gr/cm3) 1.135-1.250 ASTM D1895 Tapes: o
Other Additives No Pellet Visual Inspection Yes Thin Films: +
Notes:The above information is based on our knowledge and experience and is given in good faith to be used as recommendations for trials only. As the exact conditions of processing and usage of the finished products are beyond our control, this information is provided without any engagement or warranty from our side. Buyer should verify the suitability of the product and determine the appropriate rate under the actual conditions of applications.
* Legend: +: Recomended, o: Can be used x: Not Recomended
polimeri.bg 6
FW 140
Пигмент TiO2
Pigment Titanium Dioxide
Носител LLDPe
Carrier resin
Съдържание 40%
Pigment content
Приложение: FW 140 притежава префектна дисперсия и оптимизирани свойства на течливост, в резултат на максимална покривност и лесен за обработка.
Application: FW 140 has a perfect dispersion and optimized flow properties, resulting in a maximum coverage and easy processing.
polimeri.bg 7
FW 150
Пигмент TiO2
Pigment Titanium Dioxide
Носител LLDPe
Carrier resin
Съдържание 50%
Pigment content
Приложение: FW 150 притежава префектна дисперсия и оптимизирани свойства на течливост, в резултат на максимална покривност и лесен за обработка.
Application: FW 150 has a perfect dispersion and optimized flow properties, resulting in a maximum coverage and easy processing.
polimeri.bg 8
FW 170
Пигмент TiO2
Pigment Titanium Dioxide
Носител LLDPe
Carrier resin
Съдържание 70%
Pigment content
Приложение: FW 170 притежава префектна дисперсия и оптимизирани свойства на течливост, в резултат на максимална покривност и лесен за обработка.
Application: FW 170 has a perfect dispersion and optimized flow properties, resulting in a maximum coverage and easy processing.
polimeri.bg 9
фениксен е разработила стандартна гама от черни мастербачи, базирани на универсални
полимери. фениксен черно включва в състава си CaCo3, който придава висок коефициент
на UV защита и го прави безопасен при контакт с храна. освен стандартен набор от черни мастербачи, ние предлагаме и персонализирани - според нуждите на клиента.
Fenixen has developed a standard range of black masterbatches based on universal polymers. Fenixen BLACk by incorporating CaCo3,
which gives a high degree of UV protection and makes it safe for food contact. Besides the standard range of black masterbatches, we also offer custom - according to customer needs.
polimeri.bg 10
Properties Specifications Range MethodPackaging & Storage
Food Approval
ApplicationsThe product is recommended
for use in the following applications*:
FB1325A
Carrier ResinLLDPE
(MFI 3gr/10min)Dispertions at
200 mesh (bar)< 5,0 OEE-8.2.4-01-08
The product comes in
regular pellet form and packed in 25 kg
bags. The bags must be stored
indoors for a maximum of 12 month and in dry
environment of ap-
proximately 25ºC.
Fenixen FB1325A is not food approved.
This masterbatch offers a
convenient way to incorporate
Carbon Black in thermoplastic,
without dust con-tamination. It has prefect dispersion
and optimized flow properties,
resulting to maximum hiding power and easy processing. The product packag-ing specification
is 25 kg (with tolerance limit of
+/-100 gr).
Blow Moulding: +
PigmentCarbon Black (25% CaCo
3)
Bulk Density (%) 0.640 - 0.690 ASTM D1895 Film/Sheet: +
Pigment TypesRCF (particle size
26-29nm)Volatile Content (%) <0.20 OEE-8.2.4-01-07
Injection Moulding: +Tapes: o
Other Additives No Pellet Visual Inspection Yes Thin Films: +
FB1325B
Carrier ResinLLDPE
(MFI 3gr/10min)Dispertions at 200mesh
(bar) < 5,0 OEE-8.2.4-01-08
Fenixen FB1325B is not food approved.
Blow Moulding: +
PigmentCarbon Black (25% CaCo
3)
Bulk Density (%) 0.640 - 0.690 ASTM D1895 Film/Sheet: +
Pigment TypesRCF (particle size
26-29nm)Volatile Content (%) <0.20 OEE-8.2.4-01-07
Injection Moulding: +Tapes: o
Other Additives No Pellet Visual Inspection Yes Thin Films: +
FB1325C
Carrier Resin LLDPE
(MFI 3gr/10min)Dispertions at 200mesh
(bar) < 5,0 OEE-8.2.4-01-08
Fenixen FB1325C is not food approved.
Blow Moulding: +
PigmentCarbon Black (25% CaCo
3)
Bulk Density (%) 0.640 - 0.690 ASTM D1895 Film/Sheet: +
Pigment TypesRCF (particle size
26-29nm)Volatile Content (%) <0.20 OEE-8.2.4-01-07
Injection Moulding: +Tapes: o
Other Additives No Pellet Visual Inspection Yes Thin Films: +
Notes:The above information is based on our knowledge and experience and is given in good faith to be used as recommendations for trials only. As the exact conditions of processing and usage of the finished products are beyond our control, this information is provided without any engagement or warranty from our side. Buyer should verify the suitability of the product and determine the appropriate rate under the actual conditions of applications.
* Legend: +: Recomended, o: Can be used x: Not Recomended
polimeri.bg 11
Properties Specifications Range MethodPackaging & Storage
Food Approval
ApplicationsThe product is recommended
for use in the following applications*:
FB1340A
Carrier ResinLLDPE
(MFI 3gr/10min)Dispertions at
200 mesh (bar)< 5,0 OEE-8.2.4-01-08
The product comes in
regular pellet form and packed in 25 kg
bags. The bags must be stored
indoors for a maximum of 12 month and in dry
environment of ap-
proximately 25ºC
Fenixen FB1340A is not food approved.
This masterbatch offers a
convenient way to incorporate
Carbon Black in thermoplastic,
without dust con-tamination. It has prefect dispersion
and optimized flow properties,
resulting to maximum hiding power and easy processing. The product packag-ing specification
is 25 kg (with tolerance limit of
+/-100 gr).
Blow Moulding: +
PigmentCarbon Black (40% CaCo
3)
Bulk Density (%) 0.730 - 0.790 ASTM D1895 Film/Sheet: +
Pigment TypesHAF (particle size
27-30nm)Volatile Content (%) 65+/-1.95 OEE-8.2.4-01-07
Injection Moulding: +Tapes: o
Other Additives No Pellet Visual Inspection Yes Thin Films: +
FB1325B
Carrier ResinLLDPE
(MFI 3gr/10min)Dispertions at
200 mesh (bar)< 5,0 OEE-8.2.4-01-08
Fenixen FB1340B is not food approved.
Blow Moulding: +
PigmentCarbon Black (40% CaCo
3)
Bulk Density (%) 0.730 - 0.790 ASTM D1895 Film/Sheet: +
Pigment TypesHAF (particle size
27-30nm)Volatile Content (%) 65+/-1.95 OEE-8.2.4-01-07
Injection Moulding: +Tapes: o
Other Additives No Pellet Visual Inspection Yes Thin Films: +
FB1325C
Carrier ResinLLDPE
(MFI 3gr/10min)Dispertions at
200 mesh (bar)< 5,0 OEE-8.2.4-01-08
Fenixen FB1340C is not food approved.
Blow Moulding: +
PigmentCarbon Black (40% CaCo
3)
Bulk Density (%) 0.730 - 0.790 ASTM D1895 Film/Sheet: +
Pigment TypesHAF (particle size
27-30nm)Volatile Content (%) 65+/-1.95 OEE-8.2.4-01-07
Injection Moulding: +Tapes: o
Other Additives No Pellet Visual Inspection Yes Thin Films: +
Notes:The above information is based on our knowledge and experience and is given in good faith to be used as recommendations for trials only. As the exact conditions of processing and usage of the finished products are beyond our control, this information is provided without any engagement or warranty from our side. Buyer should verify the suitability of the product and determine the appropriate rate under the actual conditions of applications.
* Legend: +: Recomended, o: Can be used x: Not Recomended
polimeri.bg 12
FB 1325 A
Пигмент CaCO3
Pigment Carbon Black
Носител LLDPe
Carrier resin
Съдържание 25%
Pigment content
Приложение: FB 1325 A включва CaCO3 без замърсяване. Притежава префектна дисперсия и оптимизирани свойства
на течливост, в резултат на максимална покривност и лесен за обработка.
Application: FB 1325 A comprises of CaCO3 without pollution. It has a perfect dispersion and optimized flow properties,
resulting in a maximum coverage and easy processing.
polimeri.bg 13
FB 1325 B
Пигмент CaCO3
Pigment Carbon Black
Носител reLLDPe
Carrier resin
Съдържание 25%
Pigment content
Приложение: FB 1325 B включва CaCO3 без замърсяване. Притежава префектна дисперсия и оптимизирани свойства
на течливост, в резултат на максимална покривност и лесен за обработка.
Application: FB 1325 B comprises of CaCO3 without pollution. It has a perfect dispersion and optimized flow properties,
resulting in a maximum coverage and easy processing.
polimeri.bg 14
FB 1325 C
Приложение: FB 1325 C включва CaCO3 без замърсяване. Притежава префектна дисперсия и оптимизирани свойства
на течливост, в резултат на максимална покривност и лесен за обработка.
Application: FB 1325 C comprises of CaCO3 without pollution. It has a perfect dispersion and optimized flow properties,
resulting in a maximum coverage and easy processing.
Пигмент CaCO3
Pigment Carbon Black
Носител color reLLDPe
Carrier resin
Съдържание 25%
Pigment content
polimeri.bg 15
FB 1340 A
Пигмент CaCO3
Pigment Carbon Black
Носител LLDPe
Carrier resin
Съдържание 40%
Pigment content
Приложение: FB 1340 A включва CaCO3 без замърсяване. Притежава префектна дисперсия и оптимизирани свойства
на течливост, в резултат на максимална покривност и лесен за обработка.
Application: FB 1340 A comprises of CaCO3 without pollution. It has a perfect dispersion and optimized flow properties,
resulting in a maximum coverage and easy processing.
polimeri.bg 16
FB 1340 B
Приложение: FB 1340 B включва CaCO3 без замърсяване. Притежава префектна дисперсия и оптимизирани свойства
на течливост, в резултат на максимална покривност и лесен за обработка.
Application: FB 1340 B comprises of CaCO3 without pollution. It has a perfect dispersion and optimized flow properties,
resulting in a maximum coverage and easy processing.
Пигмент CaCO3
Pigment Carbon Black
Носител reLLDPe
Carrier resin
Съдържание 40%
Pigment content
polimeri.bg 17
FB 1340 C
Приложение: FB 1340 C включва CaCO3 без замърсяване. Притежава префектна дисперсия и оптимизирани свойства
на течливост, в резултат на максимална покривност и лесен за обработка.
Application: FB 1340 C comprises of CaCO3 without pollution. It has a perfect dispersion and optimized flow properties,
resulting in a maximum coverage and easy processing.
Пигмент CaCO3
Pigment Carbon Black
Носител color reLLDPe
Carrier resin
Съдържание 40%
Pigment content
polimeri.bg 18
With the active color database and accurate color matching spectrophotometer Fenixen is recognized by its clients when it comes to product safety and stricter regulatory requirements. Fenixen ensure that any ingredient which may lead to the formation of free radicals or modify the odor or taste of the finished product is eliminated from the ingredients in the production of color masterbatches.
с активена цветова база данни и точно цветово съответствие със спектрофотометър фениксен е признат от своите клиенти, когато става въпрос за безопасност на продуктите и строги регулаторни изисквания. фениксен гарантира, че всяка съставка, която може да доведе до образуване на свободни радикали или до промяна на мириса или вкуса на крайния продукт се елиминира от съставките при производството на цветни мастербачи.
polimeri.bg 19
Carrier resin Pigment Pigment content MFI (Melt Flow Index) gr/10 min Humidity
FR 115 N red LLDPE 15% T 190°C 2,16 kg 1,1 gr/10 min 0,15
FG 110 N green LLDPE 10% T 190°C 2,16 kg 1,05 gr/10 min 0,16
FBU 3 blue reLLDPE 10% T 190°C 2,16 kg 0,73 gr/10 min 0,17
FB 110 N blue LLDPE 10% T 190°C 2,16 kg 0,8 gr/10 min 0,15
FBU 120 N blue LLDPE 20% T 190°C 2,16 kg 0,02 gr/10 min 0,16
FY 115 N yellow LLDPE 15% T 190°C 2,16 kg 1,3 gr/10 min 0,17
FO 110 N orange LLDPE 15% T 190°C 2,16 kg 1,53 gr/10 min 0,18
polimeri.bg 20
Properties Value Unit Method Packaging & Storage Food Approval Applications
FBU3
Carrier Resin LLDPE - -The product comes in regular
cylindrical pellet form and packed into 25 kg. PE bags (50 bags per pallet). The bags must be stored
indoors for a maximum of 12 month and in dry environment of
approximately 25ºC. Consequently the composition is in accordance
with the European Parlament and Council Directive 94/62/EC of 20/12/1994 (as amended by
2004/12/EC, 2005/20/EC and (EC) 219/2009).
Fenixen FBU3 is not food approved.
This masterbatch offers a convenient way to incorporate Carbon Black in thermoplastic,
without dust contamination. It has prefect dispersion and optimized
flow properties, resulting to maximum hiding power and easy
processing. The product packaging specification is 25 kg (with
tolerance limit of +/-100gr). The product is recommended for use
in the following applications: Blow Moulding, Film/Sheet, Injection
Moulding, Thin Films.
Pigment Blue 10% - -
Pigment TypeRCF
(particle size 26-29nm)- -
Other Additives No - -M.F.I. (190ºC; 5 kg) 2.80-2.90 g/10 min ISO 1133
Moisture below 0.2 % ISO 787/2
Bulk Density 0.640-0.690 gr/ cm3 ASTM D1895
Density 1.60-1.70 g/cm3 ISO 1183
Blue Content 10 ± 2 % ISO 2530
Titanium Dioxide 5 ± 2 % ISO 2530
Polymer + Additives 85 ± 2 % ISO 3451
Notes:The above information is based on our knowledge and experience and is given in good faith to be used as recommendations for trials only. As the exact conditions of processing and usage of the finished products are beyond our control, this information is provided without any engagement or warranty from our side. Buyer should verify the suitability of the product and determine the appropriate rate under the actual conditions of applications.
polimeri.bg 21
Fr 115 n
Пигмент червенPigment red
Носител LLDPe
Carrier resin
Съдържание 15%
Pigment content
Приложение: FR 115 N е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.
Application: FR 115 N is suitable for polyethylen products.Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.
polimeri.bg 22
FG 110 n
Пигмент зеленPigment green
Носител LLDPe
Carrier resin
Съдържание 10%
Pigment content
Приложение: FG 110 N е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.
Application: FG 110 N is suitable for polyethylen products. Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.
polimeri.bg 23
FBU 3
Пигмент синPigment blue
Носител reLLDPe
Carrier resin
Съдържание 10%
Pigment content
Приложение: FBU 3 е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.
Application: FBU 3 is suitable for polyethylen products. Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.
polimeri.bg 24
FB 110 n
Пигмент синPigment blue
Носител LLDPe
Carrier resin
Съдържание 10%
Pigment content
Приложение: FB 110 N е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.
Application: FB 110 N is suitable for polyethylen products. Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.
polimeri.bg 25
FBU 120 n
Пигмент синPigment blue
Носител LLDPe
Carrier resin
Съдържание 20%
Pigment content
Приложение: FBU 120 N е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.
Application: FBU 120 N is suitable for polyethylen products. Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.
polimeri.bg 26
FY 115 n
Пигмент жълтPigment yellow
Носител LLDPe
Carrier resin
Съдържание 15%
Pigment content
Приложение: FY 115 N е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.
Application: FY 115 N is suitable for polyethylen products. Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.
polimeri.bg 27
FO 110 n
Пигмент оранжевPigment orange
Носител LLDPe
Carrier resin
Съдържание 15%
Pigment content
Приложение: FO 110 N е удачен за продукти от полиетилен. В зависимост от процентното съотношение (от 1% до 5%), клиентът може да контролира наситеността на цвета.
Application: FO 110 N is suitable for polyethylen products. Depending from the percentage in use (from 1% to 5%), the client can control the saturation of the color.
polimeri.bg 28
филера е материал, с различно процентно съдържание на калциев карбонат (CaCо3).
Той може да подобри качеството на фолиото и в повечето случаи значително да повиши производителността при използването му. Тъй като плътността на CaCо
3 е по-висока от тази
на полиетилена, за да се произведе фолио със съдържание на филер и със зададено тегло, трябва фолиото да се екструдира с по-малка дебелина.фениксен предлага богата гама филер с широк спектър на приложения. За подробности, моля пишете ни на [email protected]
The filler material is with different percentages of calcium carbonate (CaCO3). it can improve the quality of the film and in most cases
significantly increase productivity in its use. Since the density of CaCO3 is higher than that of polyethylene, to produce a film containing
a filler and a target weight, the film must be extruded with a smaller thickness.Fenixen offers a wide range FiLLer with a wide range of applications.For details, please contact us at [email protected]
polimeri.bg 29
Properties Value/Unit Method Food Approval
Packaging & Storage Applications Chemical Analysis of the
Calcium Carbonate materialTechnical Data of the Calcium
Carbonate material
FF 175
Melt Flow rate (190 ºC; 5 kg) 0.4 g/10 min ISO 1133
Fenixen FF175 is food
approved in
conform.
The product comes in
regular pellet form and packed in 25 kg PE bags or
Big Bags. The bags must be stored
indoors for a maximum of
12 month and in dry
environ-ment of
approximately 25ºC.
The product is recommended
for use in the following applications:
Blow MouldingFilm ExtrusionPipe extrusion
Injection Moulding
It can mix with any LDPE and HDPE and PP products. We recommend a ratio between
5% - 40%. This ratio
can change according to
the Speciality, thickness and the kind of the Raw Material.
CaCO3
99.00% Refractive index 1.59Dry brightness 97% DIN 6174 MgO 0.760% Hardness (Mohs) 3
Moisture below 0.2% DIN 53198 SiO2
0.075% Particle shapeCrystalline
rhombohedral
Density 1.8 g/cm3 DIN 53193 Fe2O
30.008%
ISO
900
2
Packed bulk density
1.1 g/cm3
Fineness Value/Unit Method Al2O
30.032%
pH value (DIN 53200)
9
d (0.97) 10 microns -
Loss on ignition
44.97%Oil absorption 12 per 100 gr powder
d (0.50) 4 microns - D.O.P. absorption
15 per 100 gr powderFiner than 2 microns 30% -
FF 180
Melt Flow rate (190 ºC; 5 kg) 0.1 g/10 min ISO 1133
Fenixen FF180 is food
approved in
conform.
CaCO3
99.70% Refractive index 1.59
Dry brightness 95.5% DIN 6174 MgO 0.000% Hardness (Mohs) 3
Moisture below 0.2% DIN 53198 SiO2
0.004% Particle shapeCrystalline
rhombohedral
Density 1.9 g/cm3 DIN 53193 Fe2O
30.020%
ISO
900
2
Packed bulk density
1.1 g/cm3
Fineness Value/Unit Method Al2O
30.030%
pH value (DIN 53200)
9
d (0.97) 14 microns -Loss on ignition
43.40%Oil absorption 12 per 100 gr powder
d (0.50) 4.60 microns - D.O.P. absorption
13 per 100 gr powderFiner than 2 microns 27% -
NotesThe above information is based on our knowledge and experience and is given in good faith to be used as recommendations for trials only. As the exact conditions of processing and usage of the finished products are beyond our control, this information is provided without any engagement or warranty from our side. Buyer should verify the suitability of the product and determine the appropriate rate under the actual conditions of applications.
polimeri.bg 30
Properties Value/Unit Method Food Approval
Packaging & Storage Applications Chemical Analysis of the
Calcium Carbonate materialTechnical Data of the Calcium
Carbonate material
FF 275
Melt Flow rate (190 ºC; 5 kg) 0.4 g/10 min ISO 1133
Fenixen FF 275 is food
approved in
conform.
The product comes in
regular pellet form and packed in 25 kg PE bags or
Big Bags. The bags must be stored
indoors for a maximum of
12 month and in dry
environ-ment of
approximately 25ºC.
The product is recommended
for use in the following applications:
Blow MouldingFilm ExtrusionPipe extrusion
Injection Moulding
It can mix with any LDPE and HDPE and PP products. We recommend a ratio between 5% - 40%. This ratio
can change according to
the Speciality, thickness and the kind of the Raw Material.
CaCO3
99.00% Refractive index 1.59
Dry brightness 97% DIN 6174 MgO 0.760% Hardness (Mohs) 3
Moisture below 0.2% DIN 53198 SiO2
0.075% Particle shapeCrystalline
rhombohedral
Density 1.8 g/cm3 DIN 53193 Fe2O
30.008%
ISO
900
2
Packed bulk density
1.1 g/cm3
Fineness Value/Unit Method Al2O
30.032%
pH value (DIN 53200)
9
d (0.97) 10 microns -
Loss on ignition
44.97%Oil absorption 12 per 100 gr powder
d (0.50) 4 microns - D.O.P. absorption
15 per 100 gr powderFiner than 2 microns 30% -
FF 280
Melt Flow rate (190 ºC; 5 kg) 0.1 g/10 min ISO 1133
Fenixen FF 280 is food
approved in
conform.
CaCO3
99.70% Refractive index 1.59
Dry brightness 95.5% DIN 6174 MgO 0.000% Hardness (Mohs) 3
Moisture below 0.2% DIN 53198 SiO2
0.004% Particle shapeCrystalline
rhombohedral
Density 1.9 g/cm3 DIN 53193 Fe2O
30.020%
ISO
900
2
Packed bulk density
1.1 g/cm3
Fineness Value/Unit Method Al2O
30.030%
pH value (DIN 53200)
9
d (0.97) 14 microns -Loss on ignition
43.40%Oil absorption 12 per 100 gr powder
d (0.50) 4.60 microns - D.O.P. absorption
13 per 100 gr powderFiner than 2 microns 27% -
NotesThe above information is based on our knowledge and experience and is given in good faith to be used as recommendations for trials only. As the exact conditions of processing and usage of the finished products are beyond our control, this information is provided without any engagement or warranty from our side. Buyer should verify the suitability of the product and determine the appropriate rate under the actual conditions of applications.
polimeri.bg 31
Properties Value/Unit Method Food Approval
Packaging & Storage Applications Chemical Analysis of the
Calcium Carbonate materialTechnical Data of the Calcium
Carbonate material
FF 380
Melt Flow rate (190 ºC; 5 kg) 0.1-0.2 g/10 min ISO 1133
Fenixen FF 380 is food
approved in
conform.
The product comes in regular
pellet form and packed in
25 kg PE bags or Big Bags.
The bags must be stored
indoors for a maximum of 12 month and in dry
environment of approximately
25ºC.
The product is recommended for
use in the following applications:
Blow MouldingFilm ExtrusionPipe extrusion
Injection Moulding It can mix with any
LDPE and HDPE and PP products. We
recommend a ratio between 5% - 40%.
This ratio can change according to the
Speciality, thickness and the kind of the Raw
Material.
CaCO3
99.70% Refractive index 1.59
Dry brightness 95.5% DIN 6174 MgO 0.000% Hardness (Mohs) 3
Moisture below 0.2% DIN 53198 SiO2
0.004% Particle shapeCrystalline
rhombohedral
Density 1.8 g/cm3 DIN 53193Fe
2O
30.020%
ISO
900
2
Packed bulk density
1.1 g/cm3
Fineness Value/Unit Method pH value (DIN 53200)
9d (0.97) 14 microns -
Al2O
30.030%
Oil absorption12 per 100 gr
powderd (0.50) 4.6 microns -
Loss on ignition
43.40%Finer than 2 microns 27% - D.O.P. absorption
13 per 100 gr powder
NotesThe above information is based on our knowledge and experience and is given in good faith to be used as recommendations for trials only. As the exact conditions of processing and usage of the finished products are beyond our control, this information is provided without any engagement or warranty from our side. Buyer should verify the suitability of the product and determine the appropriate rate under the actual conditions of applications.
polimeri.bg 32
FF 175
Приложение: FF 175 е съединение на полиетилен със 75% съдържание на CaCO3. Подходящ e за всяко приложение и може
да се смесва с LDPE и HDPE и PP продукти.
Application: FF 175 is a compound of polyethylene with 75% content of CaCO3. Suitable e for each application and can be blended
with LDPE and HDPE and PP products.
Пигмент CaCO
3
Pigment
Носител LLDPe
Carrier resin
Съдържание 75%
Pigment content
polimeri.bg 33
FF 180
Приложение: FF 180 е съединение на полиетилен със 80% съдържание на CaCO3. Подходящ e за всяко приложение и може
да се смесва с LDPE и HDPE и PP продукти.
Application: FF 180 is a compound of polyethylene with 80% content of CaCO3. Suitable e for each application and can be blended
with LDPE and HDPE and PP products.
Пигмент CaCO
3
Pigment
Носител LLDPe
Carrier resin
Съдържание 80%
Pigment content
polimeri.bg 34
FF 275
Приложение: FF 275 е съединение на полиетилен със 75% съдържание на CaCO3. Подходящ e за всяко приложение и може
да се смесва с LDPE и HDPE и PP продукти.
Application: FF 275 is a compound of polyethylene with 75% content of CaCO3. Suitable e for each application and can be blended
with LDPE and HDPE and PP products.
Пигмент CaCO
3
Pigment
Носител reLLDPe
Carrier resin
Съдържание 75%
Pigment content
polimeri.bg 35
FF 280
Приложение: FF 280 е съединение на полиетилен със 80% съдържание на CaCO3. Подходящ e за всяко приложение и може
да се смесва с LDPE и HDPE и PP продукти.
Application: FF 280 is a compound of polyethylene with 80% content of CaCO3. Suitable e for each application and can be blended
with LDPE and HDPE and PP products.
Пигмент CaCO
3
Pigment
Носител reLLDPe
Carrier resin
Съдържание 80%
Pigment content
polimeri.bg 36
FF 380
Приложение: FF 380 е съединение на полиетилен със 80% съдържание на CaCO3. Подходящ e за всяко приложение и може
да се смесва с LDPE и HDPE и PP продукти.
Application: FF 380 is a compound of polyethylene with 80% content of CaCO3. Suitable e for each application and can be blended
with LDPE and HDPE and PP products.
Пигмент CaCO
3
Pigment
Носител reLLDPe
Carrier resin
Съдържание 80%
Pigment content
polimeri.bg 37
фениксен предлага широка гама от мастербачи изработени от изключително устойчиви полимерни добавки. Тези добавки включват приплъзване, анти-блок, UV- защита, против мъгла, антиоксидант и свойства за обработка в промишлеността.фениксен ВлагоаБсорБер има функцията да иззема влагата от материала. Удачен е за рециклиран материал.
Fenixen offers a wide range of masterbatches made from highly resistant polymer additives. These additives include slip, anti-block, UV- protection, anti-fog, anti-oxidant properties and processing industry.Fenixen HUMiDiTY ABSOrBer function encroaching moisture from the material. Provision for recycled material.
polimeri.bg 38
Properties SpecificationsNominal
Value (ENG)
Method Packaging & Storage Applications
The product is recommended for use in the following
applications*
FD 250
Carrier Resin
LLDPE (MFI 3gr/10min)
Total Active Ingredient (%)
50.00 ± 1.80 OEE-8.2.4-01-09The product comes
in regular pellet form and packed in
25 kg PE bags (tolerance
+/-100gr). The bags must be stored indoors
for a maximum of 12 month and in dry environment of approximately
25ºC.
This masterbatch was develop to remove the humidity the plastic rawmaterials during processing. It is particulary
usefull when processing recycled materi-als. The recommendation additional level
of FD 250, varies between 0.5 – 2% depending on the humidity content of the
processed material.
Blow Moulding +
Main Additives
DesiccantVolatile
Content (%)<0.15 OEE-8.2.4-01-07
Film/Sheet +Injection Moulding +
Other Additives
NoPellet Visual Inspection
YesTapes o
Thin Films +
FD 270 Carrier Resin
LLDPE (MFI 3gr/10min)
Total Active Ingredient (%)
70.00 ± 1.80 OEE-8.2.4-01-09This masterbatch was develop to remove
the humidity the plastic rawmaterials during processing. It is particulary
usefull when processing recycled materi-als. The recommendation additional level
of FD 270, varies between 0.5 – 2% depending on the humidity content of the
processed material.
Blow Moulding: +
Main Additives
DesiccantVolatile
Content (%)<0.15 OEE-8.2.4-01-07
Film/Sheet: +Injection Moulding: +
Other Additives
NoPellet Visual Inspection
YesTapes: o
Thin Films: +
Notes:The above information is based on our knowledge and experience and is given in good faith to be used as recommendations for trials only. As the exact conditions of processing and usage of the finished products are beyond our control, this information is provided without any engagement or warranty from our side. Buyer should verify the suitability of the product and determine the appropriate rate under the actual conditions of applications.
* Legend: +: Recomended, o: Can be used x: Not Recomended
polimeri.bg 39
FD 250
Приложение: Фениксен FD 250 е полиетиленово съединение и е подходящо за всяко приложение. Може да се смесва с LDPE и HDPE и PP продукти.
Application: Fenixen FD 250 is a Polyethylene Compound and is suitable for any application and it can mix with any LDPE and HDPE and PP products.
Носител reLLDPe
Carrier resin
Съдържание 50%
Pigment content
polimeri.bg 40
FD 270
Носител reLLDPe
Carrier resin
Съдържание 70%
Pigment content
Приложение: Фениксен FD 270 е полиетиленово съединение и е подходящо за всяко приложение. Може да се смесва с LDPE и HDPE и PP продукти.
Application: Fenixen FD 270 is a Polyethylene Compound and is suitable for any application and it can mix with any LDPE and HDPE and PP products.
КонтаКти:София 1839
кв. Нова Враждебна, ул. “Япаджа” 46Фтел.: 02 945 45 22; 02 945 45 90
факс: 02 945 45 33 email: [email protected]
ContaCts:Sofia 1839, BulgariaNova Vrajdebna, “Yapadzha” 46F str.tel.: +359 2 945 45 22; +359 2 945 45 90fax: +359 2 945 45 33email: [email protected]
polimeri.bg