fenders and mooring 501 - riverside marine & mooring.pdf · fenders and mooring 501 ... made...
TRANSCRIPT
FENDERS AND MOORING 501
Oval shape to minimize roll.Integral eyelets to stand the
constant pull and tug of everydayusage. Pre-inflated to just theright pressure for maximumeffectiveness.
Hull-Gard™ Fenders
Guaranteed For TheLife Of Your Boat
TAY 41020 3-1/2” x 13” $20.83
TAY 41021 4-1/2” x 16” $24.93
TAY 41022 5-1/2” x 20” $30.81
TAY 41023 6-1/2” x 23” $47.77
TAY 41028 8-1/2” x 27” $92.64
Transom FenderInflatable Vinyl Fender
Guaranteed for the Life of Your Boat AgainstSplitting or Bursting! Uniquely shaped to fit thestern of a sailboat or the edge of most swim plat-forms up to 4” thick. An integral 3/4” diametertube allows a securing line to pass from end toend while a contoured shape helps “grip” the fen-dering location. Made from soft, flexible vinyl. Rubber football inflationvalve to adjust the level of firmness to satisfy all applications. White
ORDER NO. PRICETAY 56090 $143.30
SIZE10” x 22”
ORDER NO. SIZE PRICEBlue
TAY 531022 5-1/2” x 20” $30.81
TAY 531023 6-1/2” x 23” $47.77
ORDER NO. SIZE PRICE
ORDER NO. SIZE PRICE
TAY 541022 5-1/2” x 20” $30.81
TAY 541023 6-1/2” x 23” $47.77
Hunter Green
ORDER NO. SIZE PRICE
TAY 581022 5-1/2” x 20” $30.81
Yellow
Cranberry
ORDER NO. SIZE PRICE
TAY 9035 8” x 20” $42.97
TAY 9036 10” x 26” $49.65
Navy
TAY 9031 8” x 20” $42.97
TAY 9032 10” x 26” $49.65
ORDER NO. SIZE PRICEBlack
The Ultimate Fender™
ORDER NO. PRICETAY 46090 $136.29
L - 15” W - 15” H - 6-1/2”• Neoprene rubber “football” valve for long life• Perfect material match for seamless construction• Special PVC formulation for softness, flexibility
and long life• Lateral reinforcement to resist compression• Rectangular shape won’t roll against dock• Lateral center hole for tying
on to posts, piers, etc.
CAUTION: THE RAFTING CUSHION MUSTNEVER BE USED AS A LIFE SAVING DEVICE.
• Tubular center for end-to-end line passage• Ribbed sides to minimize rolling out of position• Built-in needle Bivalve™ lets you control the level inflation
See Tuff End™ for details• Recommended inflation is 2 psi• Inflation needle for hand pump included
“Big B” Inflatable Vinyl Fenders
ORDER NO. SIZE PRICEBlue
TAY 41025 6” x 15” $68.78
TAY 41026 8” x 20” $92.90
TAY 41032 10” x 26” $164.10
ORDER NO. SIZE PRICEBlack
TAY 71026 8” x 20” $92.90
TAY 71025 6” x 15” $68.78
TAY 71032 10” x 26” $164.10
White
TAY 1025 6” x 15” $68.78
TAY 1026 8” x 20” $92.90
TAY 1032 10” x 26” $164.10
TAY 1034 12” x 34” $237.22
TAY 531025 6” x 15” $67.32
TAY 531026 8” x 20” $92.90
TAY 531032 10” x 26” $160.57
TAY 541026 8” x 20” $92.90
TAY 541032 10” x 26” $164.10
Hunter Green
Cranberry
Guaranteed AgainstSplitting or Bursting
For The LifeOf Your Boat
ORDER NO. SIZE PRICE
TAY 1020 3-1/2” x 13” $20.83
TAY 1021 4-1/2” x 16” $24.93
TAY 1022 5-1/2” x 20” $30.81
TAY 1023 6-1/2” x 23” $47.77
TAY 1028 8-1/2” x 27” $92.64
TAY 1024 10-1/2” x 30” $130.90
White
ORDER NO. SIZE PRICE
TAY 571022 5-1/2” x 20” $30.81
TAY 571023 6-1/2” x 23” $47.77
Navy
ORDER NO. SIZE PRICE
TAY 601022 8-1/2” x 20” $30.81
Sand
ORDER NO. SIZE PRICE
TAY 31722 5-1/2” x 20” $30.81
Black
TAY 31723 6-1/2” x 23” $47.77
Fender LinesColor Double BraidedSold in pairs. 6ft in length with an eye on one end.
ORDER NO. DESCRIPTION PRICE
UNI DB386BK 3/8” x 6’ Black $9.05
UNI DB386WH 3/8” x 6’ White $9.05
UNI DB386NB 3/8” x 6’ Navy Blue $9.05
UNI DB386BL 3/8” x 6’ Blue $9.05
Fender LinesNylon 3 strand TwistedSold in pairs. 6ft in length with an eye on one end.
ORDER NO. DESCRIPTION PRICE
UNI 146FL 1/4” x 6’ White $5.22
UNI 386FL 3/8” x 6’ White $9.38
Fleece Fender BootsFinally a fender cover specially designed to fit CRTTM(Center Rope Tube) style fenders. These will provide
your boat with the ultimate in hull protection. No marring orcolor transfer to your boat. Constructed from 12ounce Blizzard Fleece, these 100% polyesterfender boots are available in blue or black andcome with reinforced grometted top with anadjustable tie on opposite end for a snug fit.
• Seamless one piece construction• High gloss finish• Guaranteed for the life of your boat!
• Unique oval shape prevents rolling• Molded in football needle style valve is integrallymolded into the fender, not glued like the competition.
• Seamless one piece construction• High gloss finish• Guaranteed for the life of your boat!
• Center Rope Tube™ allows for end-to-end line passage• Can be hung vertically or horizontally with a single line• Molded in football needle style valve is integrally moldedinto the fender, not glued like the competition.
• Double molded ends for added strength• Ribbed sides to minimize roll• Molded in football needle style valve is integrallymolded into the fender, not glued like the competition.
• Seamless one piece construction• High gloss finish• Guaranteed for the life of your boat!
Big B™ Inflatable CRT™ Vinyl Fenders
Hull Gard® Inflatable Vinyl Fenders
Super Gard™ Inflatable Vinyl Fenders
Stock No. Stock No. Stock No. Stock No. Stock No. Stock No. Stock No. Stock No. Stock No. Stock No. D x L Size Boat Size Sugg.Retail PriceTAY950520 TAY951520 TAY952520 TAY959520 TAY953520 TAY954520 TAY957520 TAY955520 TAY960520 TAY958520 5.5" x 20" 15' to 20' $41.03TAY950622 TAY951622 TAY952622 TAY959622 TAY953622 TAY954622 TAY957622 TAY955622 TAY960622 TAY958622 6.5" x 22" 20' to 25' $69.19TAY950824 TAY951824 TAY959824 TAY954824 TAY957824 TAY960824 8.5" x 26" 25' to 35' $118.66TAY950128 10.5" x 30" 35' to 50' $167.93
Stock No. Stock No. Stock No. Stock No. Stock No. D x L Size Boat Size Sugg.Retail PriceTAY1025 TAY41025 TAY71025 TAY531025 TAY541025 6" x 15" 20' to 25' $68.78TAY1026 TAY41026 TAY71026 TAY531026 TAY541026 8" x 20" 25' to 35' $92.90TAY1032 TAY41032 TAY71032 TAY531032 TAY541032 10" x 26" 35' to 50' $164.10TAY1034 12" x 34" 50' to 60' $237.22
Stock No. Stock No. Stock No. Stock No. Stock No. Stock No. Stock No. Stock No. D x L Size Boat Size Sugg.Retail PriceTAY1020 TAY41020 3.5" x 13" to 10' $20.83TAY1021 TAY41021 4.5" x 16" 10' to 15' $24.93TAY1022 TAY41022 TAY31722 TAY531022 TAY541022 TAY571022 TAY601022 TAY581022 5.5" x 20" 15' to 20' $30.81TAY1023 TAY41023 TAY31723 TAY531023 TAY541023 TAY571023 6.5" x 23" 20' to 25' $47.77TAY1028 TAY41028 8.5" x 27" 25' to 35' $92.64TAY1024 10.5" x 30" 35' to 50' $130.90
White Blue Black Teal Cranberry Hunter Green Navy Red Sand Yellow
White Blue Black Cranberry Hunter Green y1 Red
White Blue Black Cranberry Hunter Green Navy Sand Yellow
You take a lot of pride in your boat, and part of that pride is its color scheme. Too often, the colors of your acces-sories just never seem to match up quite right with the boat’s gelcoat, or with each other, leaving it with a variety ofmis-matched colors at the dock.That’s why Taylor Made is introducing True Color™. Our team of engineers has spent countless hours creating
color mixes for our fenders and accessories to closely match the most popular colors used in OEM’s gelcoats and trim.So, when choosing a brand to outfit your boat, choose Taylor Made®. . . . the only marine accessory company
with true colors.
Taylor Made Products • 65 Harrison St., Gloversville, NY 12078www.taylormadeproducts.comA Member of The Taylor Made Group® Taylor Made is a registered trademark of the Nelson A. Taylor Co., Inc.
FENDERS AND MOORING 503
Taylor Super Gards™Guaranteed for the Life of Your Boat against Splitting or Bursting.• Injection molded valve seat houses needle valve for easy inflation• Specially formulated marine grade vinyl. Molded-in rib construction.
Double molded black ends for added strength.• Seamless one piece molded construction. Extra strength and size rope hole.
Recommended inflation is 2 psi
Now made with extra stretchy and seamless nylonmaterial for that Taylor Made fit. Improved fade resis-tance protects them from the sun’s damaging rays.Designed to provide extra protection for your boat’shull and to keep your fenders clean.
Fender Boots
ORDER NO. FENDER SIZE PRICEBlack
TAY 5043 8” x 20” & 8-1/2” x 27” $29.78
TAY 5042 6” x 15” & 6-1/2” x 23” $25.90
TAY 5044 10” x 26” & 10-1/2” x 30” $35.64
Blue
TAY 5002 6” x 15” & 6-1/2” x 23” $25.90
TAY 5003 8” x 20” & 8-1/2” x 27” $29.81
TAY 5004 10” x 26” & 10-1/2” x 30” $35.72
Pontoon FendersExclusively designed for the needs of pontoon boaters, these unique fenders offer a level of protection to areas on the pontoon boat other fenderscan’t provide.Pontoon Fender is specifically designed to fit snuggly between the pontoon and the deck of the boat, protecting both from rafting boats, docks, orother objects.Fence Saver secures to the fence or railing and is designed to prevent contact to the delicate aluminum fencing. The fence saver is especiallyeffective preventing those nasty dings that occur when rafting a pontoon boat to a conventional hull boat.Corner Fenders come in two shapes for both radius style or 90° pontoon corners. The corner bumpers mount over the original factory installedaluminum corner section to provide air-cushioning impact protection when docking. Each corner section is molded from a special gray PVCformulated to match the aluminum color of the boat and secures with stainless fasteners. All pontoon fenders are made from marine-grade, UVresistant vinyl and have an integrated rubber football style valve for easy inflation.
ORDER NO. PRICETAY 31030 $52.37
DESCRIPTION
Pontoon Fender
TAY 31032 $69.73Fence Saver
TAY 31033 $32.7990° Corner Fender
TAY 31034 $32.79Radius Corner Fender31030
31032
31033 31034
ORDER NO.
White Blue Teal Hunter Green NavyTAY 950520 TAY 951520 TAY 959520 TAY 954520 TAY 957520TAY 950622 TAY 951622 TAY 959622 TAY 954622 TAY 957622TAY 950824 TAY 951824 TAY 959824 TAY 954824 TAY 957824TAY 950128
SandTAY 960520TAY 960622TAY 960824
BlackTAY 952520TAY 952622
RedTAY 955520TAY 955622
YellowTAY 958520TAY 958622
CranberryTAY 953520TAY 953622
5-1/2” x 20”
6-1/2” x 22”
8-1/2” x 26”
10-1/2” x 32”
FENDERSIZE PRICE
to 25’ $41.03
20’ to 35’ $69.19
30’ to 45’ $118.66
35’ to 60’ $167.93
BOATSIZE
Economy BoatGuard® FenderThese inflatable fenders are constructed from marine gradevinyl and have molded in ribs to help keep the fender fromrolling. Needle type valve for easy inflation of fender todesired firmness.
ORDER NO. PRICETAY 31013 $26.22
SIZE4” x 16”
TAY 31014 $70.968” x 26”
TAY 31015 $31.495” x 18”
TAY 31016 $36.186” x 22”
504 FENDERS AND MOORING
Fender Holders
2 Fender UnitsStainless Steel
Fender Tender II®Use this Davis accessory to clip your fendersto rails, lifelines, side wing windows or cleats.Fender Tender II® simplifies the handling andrelocation of boat fenders. The “Railing Lock”firmly grasps rails from 7/8” to 1” diameter.“Lifeline Lock” provides added safety. Use1/4” to 3/8” diameter nylon line. Made oftough, sun-resistant plastic.
Contour FenderThe HULL HUGR Contour Fenderhinges to wrap around the gunwaleand hull, following the contours ofthe boat. It can be used as a flatfender too. Size: 23” long x 7” widex 2” thick. Constructed of incrediblydurable tri-laminate material withpolycarbonate grommets. Stowsconveniently under seats or in sidestorage compartments. Available inblue and white.
Rail Mount Fender Line Clip• Injection molded polyethylene clips that mount
securely to your 7/8” railings• Use for hanging fenders, holding power
cords, etc.• Sold in pairs
ORDER NO.TAY 1093
PRICE
$9.62
ORDER NO. DIAMETER PRICETAY 2009 7” to 9” $231.20
TAY 2011 9” to 11” $273.65
ORDER NO. PRICEDAV 393 $9.99
ORDER NO.KWK HH1C
PRICE$13.65
COLORBlue
KWK HH1CW $13.65White
KWK HH1CB $13.65Black
Low Freeboard Fender
ORDER NO. SIZE COLOR CTN. PRICE
TAY 31005 5”x14” White 6 $28.42TAY 31006 5”x14” Black 6 $31.30
TAY 31005 5”x14” White 6 $28.42TAY 31005 5”x14” White 6 $28.42
TAY 31007 7”x23” White 4 $71.19
Specially shaped to protect the gunwalesand rubrail on low freeboard boats. Offerssuperior protection against high docks.Seamless one piece construction, marinegrade vinyl, molded in valve
ORDER NO. DESCRIPTION PRICESDG 3273571 Up to 7” $79.95
SDG 3273591 Up to 9” $89.95
SDG 3273611 Up to 11” $99.95
Rail Mount Dual Fender HolderFits 7/8”–1” railsFormed 304 Stainless
ORDER NO.SDG 3272001
LINE SIZE1/4” - 5/16”
PACK1 pr.
Lifeline Fender Clip• Injection molded polyethylene clamp brackets
mount securely to your 3/16” to 1/4” lifelines• Use for hanging fenders, holding power cords, etc.
* Use on 3/16” – 1/4” rope• Sold in pairs
ORDER NO.TAY 1096
PRICE
$9.35
Fender Mate – Injection Molded NylonThe latest in fender brackets madeof marine grade reinforced nylon.Clamps securely onto both 7/8”and 1” round tubing and 3/16”and 1/4” life line wire.
Boat SaverTM Torpedo BumpersThese large, durable bumpers add anattractive and functionally rugged cushionto the leg pipes of your docking system.Fabricated from the same Quality materialas our Dolphin™ fenders, each weighs arugged 2.7 lb. and measures 18” tall witha diameter of 5”. Place them on dockleg pipes over the mounting brackets toprevent damaging your watercraft fromprotruding bolts. White.
ORDER NO. PRICEDEI 91110F $34.33
Quick Wrap Fender Strap• Fits rails up to 1-1/4” wide.• Includes 8 feet of rope.• Raise and lower your fender with 2 fingers.• Built-in loop and snap for excess line.• No mechanical parts that break!• Made from marine-grade material• Sold individually
ORDER NO. PRICETAY 1083 $18.53
PRICE$11.75
FENDERS AND MOORING 505
Tidy-Ups™ Fender Adjuster
• Quick and simple. These fender adjusterssimply snap over lifelines or railing and are
ready to use.
• Holds lines up to 5/8” diameter.
Fender Lock – Chrome-Plated ZincThe eye is to be permanently attached to theFender line.
Snap TypeFender HookChrome-plated
zinc.
ORDER NO. MAXIMUMROPE SIZE DESCRIPTION PRICE
PER 1309DP0CHR 1/4” 2 pcs. per card $18.44
ORDER NO. I.D. EYE O.D. FLANGE DESCRIPTION. PRICEPER 1299DP0CHR 3/8” 1-1/2” 2 pcs. per card $21.13
Clothes Claws™ Boaters’ Clothespin• Fits all 7/8” to 1” tubular railings – boat railings, lawn chairs, etc.• Has incredible holding power.• High quality plastic molded with UV inhibitors.• One-piece construction is unbreakable under normal use.• Unaffected by saltwater.Plus…it floats!
ORDER NO. DESCRIPTION RAIL SIZE PRICETAY 1015 White Vinyl Standard $17.69
ORDER NO. DESCRIPTION PRICETAY 1650 Clothespins (4 per pack) $10.41
Hull Gard® Inflatable Vinyl Dock WheelsHull-Gard® Dock Wheel Fenders are designed to protect your boat
from damage caused from hitting dock corners and edges. Offered in
two styles -- one with a heavy duty galvanized steel base designed for
mounting on dock, corners and another with a straight heavy duty
galvanized steel base for mounting along dock edges. Pre-drilled holes
are provided for easy installation with bolts or screws. Both are fitted
with a spindle which holds the fender in place while it rotates with the
movement of your boat. Designed with ribs for
easy rolling action, the vinyl dock wheel can
be inflated to the firmness you desire.
CORNER MOUNTORDER NO. WHEEL SIZE PRICETAY 1072 12” $216.66
TAY 1078 9” $118.53
STRAIGHT MOUNTORDER NO. WHEEL SIZE PRICETAY 1073 12” $203.91
TAY 1079 9” $111.36
REPLACEMENT WHEELORDER NO. WHEEL SIZE PRICETAY 91072 12” $89.47
TAY 91078 9” $29.02
TAY 91082 18” $116.40TAY 1081 18” $279.59
Fender Adjuster for Pontoon RailsFinally, a fender adjuster designed specifically for the
1” square tube rails of Pontoon Boats. The mounting structure clampssecurely to square tubing yet can be repositioned quickly and easily.
Made from quality marine grade
components -- simple height
adjustment for lines up to 5/8”.
ORDER NO.TAY 1139
PRICE
$20.65
ORDER NO. PRICETAY 1085 $12.42
Big B™ Fender HangerDesigned for use on Taylor Made fenders with 3/4” I.D. tubing. May beused on other brands, but due to variation among brands the consumer
must verify a tight enough fit between the tube and product for proper
function (Center tubes must be small enough to keep the product halves
firmly together).• Injection molded reinforced nylon for
strength.
• Vented to prevent water accumulating infender tube.
• Professional “finished” look.• Fits 3/8” diameter rope.3 per pack
Tidy - Ups™ Fender Adjuster KitsTo Match Taylor*Made Fender Color
The finest looking, top performing fender adjusters avail-able. Tidy-UpsTM Kits include (1) Tidy-UpsTM Fender
Adjuster and (6) feet of 3/8” solid braid polypropylenerope. Made from high quality marine grade components,
they are quick and easy to use. Simply snap adjuster over
your lifeline, railing, or stanchion and set fender height in
an instant. Polypropylene rope is color matched to your
Taylor fender. It will not fade or kink, and is mildew androt resistant. A pre-spliced and professionally finished end
allows your fender to be tightly secured without hard to
untie knots.
ORDER NO. COLOR PRICETAY 1131 White $32.80
TAY 1133 Black $32.80
PACKED
Each
TAY 11391 $106.4236 pc. Display
506 FENDERS AND MOORING
Fender LocksThese low profile stainless steel fender lock bases makehanging fenders fast and easy.
Sully Stick Winter StickA long tapered buoy used in place of a
standard round mooring buoy during the winter
months. The Sully Stick has a molded in eyelet atthe top for easy retrieval. The base eyelet is reinforcedwith a galvanized metal bushing to attach a rope and
connect to the anchor chain. The shape of the Sully stickhelps it escape ice entrapment better than a round buoy and can
extend the useful life of a mooring buoy by protecting it from the
damaging effects of freezing temperatures.
Line HangerKeep shipshape by keeping loose
lines neatly in place with Taylor Madeline hangers. Mounting band snaps
on any rail, lifeline or stanchion. Snap
the bottom band around your coil of
rope and it’s neatly stored away.
ORDER NO. PRICEGAR 71080 $18.79
ORDER NO. PRICETAY 1006 $11.96
ORDER NO. PRICESDG 672410 $5.73
A1-5/16”
B5/16”
C1”
Fender Height AdjusterRaises or lowers your boat fenders with ease. Does
away with tying and untying fender lines. To raise afender, just pull up on the fender line, it automatically
locks in place when you reach the desired height.
To lower, simply push the lever with your thumb andlet the line slide down and lock in place. One model
permits fenders to be attached wherever needed. Fits
wide oval rails, all diameter stanchions and life lines.
Includes soft vinyl loop with easy on-off snap attach-
ment. Handles lines up to 1/2” diameter.
Handy Securing StrapsQuick and easy to use. Closes or opens with simple turn snap. Ideal for holding all
types of gear aboard at the position you will need it especially line coils, life vests or
rings, fishing rods or poles. Use to secure and prevent yacht or deck chairs as well as
countless other accessories from falling overboard. Strap is strong, mildew proof white
vinyl with plated brass swivel fasteners.
Model 71069 – Adjustable strap wraps around to fit
diameter of any railing, stanchion, life-lines or other parts
of the boat.
Model 71077 – Strap wraps around railing, stanchion, life
lines or other parts of the boat and is secured with simple
turn snap. 1 pair per pack.
ORDER NO.TAY 22140
PRICE
$110.95
Fender HookInvestment Cast,
316 Stainless.
ORDER NO.TAY 1009TAY 1010TAY 91010
PRICE$3.18
$10.19
$107.191010
Hand Pump with Adapter HoseCompact hand pump for filling fenders, rafts, etc.
ORDER NO. PRICETAY 1005 $15.42
ORDER NO. PRICEGAR 71069 $26.06
GAR 71077 $28.81
#1010 Fender lock set
#1009 Extra nylon locking pegs
Dealer display #91010 contains 12
fender locks
FENDERS AND MOORING 507
ORDER NO. SIZE PRICENER 629K02000012 5/8”X12’ $49.02
NER 629K02000015 5/8”X15’ $57.51
NER 629K02400015 3/4”X15’ $72.35
NER 629K02400020 3/4”X20’ $80.95
3-Strand Mooring Pendant100% high tenacity 3-strand Nylon is long-wearing and abrasion
resistant with excellent elongation properties.
• Galvanized heavy duty thimble on buoy end• Professionally spliced soft eye on boat end
ORDER NO. SIZE PRICENER 539K62000012 5/8”X12’ $144.91
NER 539K62000015 5/8”X15’ $166.09
NER 539K62400015 3/4”X15’ $166.09
NER 539K62400020 3/4”X20’ $189.63
Poly/Nylon Mooring PendantA double braid rope consisting of a braided Nylon core, for both stretch
and flexibility, covered with a tight braiding of Polyester cover strands
for added toughness. It comes standard with a thick urethane coating
for added protection, and also tinted yellow for visibility.
• Galvanized heavy duty thimble on buoy end• Professionally spliced soft eye on boat end• Protective urethane coating• Durable Cordura chafe guard - standard
Sur-Moor T3C™ Mooring Buoys*Buoyancy rating - The number indicated is the maximum flotationthe buoy provides while fully submerged. 50% of this value will be the
weight the buoy can support at the level of the blue stripe.
PVC tube, double PVC collar, closed cell foam. Vinyl stripe. Toughpolyethylene shell.
ORDER NO. TUBE BUOY CIRCUMFERENCE *BUOYANCY PRICETAY 46370 2” 12” 38” 30 $127.03
TAY 46371 2” 15” 47” 60 $166.04
TAY 46372 2.5” 18” 57” 100 $207.27
TAY 46374 2.5” 24” 75” 240 $371.08
T3C™ Mooring CollarHot-dip galvanized steel collar protects your T3C buoy from anchor chain wear, prolonging the life of thebuoy. Designed to work in combination with standard shackles. Mooring collars are sized to slip into the
top of 2” or 2-1/2” tube diameters.
ORDER NO. TUBE DIAMETER FITS T3C PRICETAY 33020 2” 46370 and 46371 $18.05
TAY 33025 2-1/2” 46372 and 46374 $22.48
Sur-Moor™ Shackle BuoyThe rope nest design has a built in cup shape at the top of the buoy
that allows the anchor shackle to nest below the buoy surface. Thisrecessed area helps shield the shackle from contacting the boat hull
while making a convenient nesting place for the pennant line when
the boat departs from the mooring. The hard-skin polyethylene shellis UV protected to resist the weathering effects of sunlight and isfoam filled to positively displace water. Tube-through-the-centerdesign with blue reflective striping.
Buoy Diameter 18”
Tube Diameter 2”Buoyancy 100 lbs.
ORDER NO. PRICETAY 46818 $210.29
508 FENDERS AND MOORING
CIRCUM-FERENCE
BUOY-ANCY
Vinyl Float7-1/2” round float has many uses—to mark
hazards, fishing spots, race course, or as a
fender when this shape is required. Made of
the same high quality vinyl used in
Taylor Made Hull-Gard Fenders. White.
Hot Dipped GalvanizedBuoy Hardware
ORDER NO. MAST LENGTH PRICETAY 22105 48” $67.06
TAY 22106 74” $71.80
TAY 22126 96” $76.08
ORDER NO. DIA. CIRCUM-FERENCE PRICE
TAY 61146 15” 47” 60 lbs. $91.61
TAY 61149 18” 57” 100 lbs. $121.65
ORDER NO. SIZETAY 33012 12”
TAY 33018 18”
TAY 33024 24”
PRICE$57.52
$60.99
$75.73
Tuff End™Inflatable Vinyl BuoysSpecial PVC formulation for flexibility,
softness, and long life. High gloss
finish.
OrangeVinyl coated metal weight which offers superior
scratch protection for your boat.
Complete rod assemblies all
hot dipped galvanized.
Rod diameter – 1/2”
Weldless Sling LinksAll are drop forged and heat treated. Ultimate Load is 6 times
Working Load Limit.
Hard Skin Mooring BuoysThick one piece outer shell molded of high density polyethylene filled
with solid closed-cell foam. Each SUR-MOOR is puncture proof and
almost indestructible. Fittings, swivels and rings are hot dipped galva-
nized for added years of service.
Three Year WarrantySee warranty card on products for details.
Some restrictions may apply.
ORDER NO. DIAMETER BUOYANCY(LBS.) PRICE
TAY 22170 12” 30 $153.02
TAY 22171 15” 60 $196.55
TAY 22172 18” 100 $248.07
Blue Stripe
Mast BuoysFiberglass mast comes complete with a clip to attach a flag
or pennant. Perfect as a pick-up buoy and ideal for all
diving applications.
ORDER NO. DIA.
TAY 1146 15” 47” 60 lbs.
TAY 1149 18” 57” 100 lbs.
PRICE
$91.61
$121.65
White
ORDER NO. SIZE WORKINGLOAD PRICE
ORS 3625335 5/8 4200 Lbs. $34.31
ORS 3625235 1/2 2900 Lbs. $22.13
ORS 3625435 3/4 6000 Lbs. $56.52
ORDER NO. PRICE
TAY 140 $18.96
Pendant Buoy• Shell; high density polyethylene keeps mooring/pendant line dry
• Protects boat from contact with mooring hardware
• Stable in water - won’t roll over causing mooring line to get wet
• Stackable when not in use - with mooring line and hardware when
moorings are pulled out during winter months
• Lifting grips to aid in handling
ORDER NO. SIZE TUBESIZE
BUOYANCY(+ OR -5 LBS.)
PRICE
CAL 4202T2 18” 2” 105 lbs. $194.96
CAL 4202T212 18” 2-1/2” 105 lbs. $194.96
CAL 4203T212 24” 2-1/2” 240 lbs. $285.00
TAY 61143 12” 38” 33 lbs. $61.18
BUOY-ANCY
FENDERS AND MOORING 509
Single Cushion Dock Bumper is theperfect replacement for old tires, old firehose, and other makeshift bumpers. Gray.
Heavy Duty Double CushionDock Bumper. Cushions landingfor even the largest boats andheaviest traffic. Gray.
Dock Bumper
Sold In-Std-Ctn Only
ORDER NO. STD PKG-25’ PRICESTD 75000659 4-1/4” Wide, 1-7/16” High $310.50
ORDER NO. PRICESTD 75000664 $141.35
STD 75000660
STD. PKG. 25’Regular 2-3/8” Wide, 1-3/8” High
Heavy Duty 3-3/8” Wide, 1-7/8” High $256.17
Price shown is per ctn. Price shown is per ctn.
Rubber Dock EdgingEPDM rubber edging for docks and piers. EPDM rubber is designed towithstand the harshest of environments, and is soft enough to cushionyour boat from the dock or pier. At 70 Durometer this premium line ofdock edging starts softer than vinyl, and stays flexible when exposed toUV, offering uncompromising longevity.
The Double “D” with a custom designed notchin the back of this edging, it can easily bendaround everything from pilings to 90 degreedock edges.
The “P” profile is designed to attach to the topof the dock and wrap around to also protect theside of the dock. Available in two different sizesto best suit all applications.
Dock Pro™ Heavy Duty Vinyl Dock BumpersDock Pro heavy-duty vinyl bumpers are ideal for rough conditions, and cantake a beating. Made from U.V. resistant, marine-grade vinyl, theyprovide excellent protection for your boat and dock. Straight piece can bemounted horizontally, or the curved back side allows for vertical mountingon pilings. Corner piece provides superior impact protection on dockcorners. Both bumpers have inflation valves for easy adjustment to desiredfirmness. Pre-drilled for easy, permanent mounting with plated fasteners.
Corner GuardsMade from the same great rubbermaterial as our dock extrusion.
ORDER NO. DESCRIPTION PRICE
TAY 96036 Double “D” Profile 3-7/8”H x 1-3/16”W x 12’ $167.31
TAY 96040 “P” Profile 3”H x 2-1/2”W x 6’ $133.38ORDER NO. DESCRIPTION PRICE
TAY 96008 2-1/4” x 6” $43.85
TAY 96009 3-1/2” x 6” $51.83
ORDER NO. SIZE DESCRIPTION PRICE
TAY 45500 37”L x 4.5”W x 6”H Straight Mount $126.83
TAY 45510 13.5”L x 6”W x 10.5”H Corner Mount $108.15
Solar CleatLiteTMThese solar lights are mounted on top of a sturdy steel base, housedinside an attractive, Colonial style 12” tall, 4” wide vinyl pillar. Easy toinstall and NO WIRES. These decorative and functional dock acces-sories will add style to your dock day or night. The lamp is designed toilluminate your boat, dock and stainless steelcleat, and not shine in your eyes.
Each kit includes, pillar, stainless steel cleat,mounting base, solar light and rechargeablebatteries.
ORDER NO. PRICEDEI 96250F $121.35
Solar Piling Light• Ideal for docks, decks, walkways and driveway or slip entries• Attractive & Functional• Up to 10hr run time• Bright white LED / 360° Illumination• Powerful solar charging performance• Installs easily with no wires• Attractive & Rugged broad-based ABS pillar• Fits piling diameters 7” and up• Replaceable, Rechargeable (Ni-MH) AA batteries• Weatherproof
ORDER NO. PRICEDEI 96264F $118.12
510 FENDERS AND MOORING
ORDER NO. PRICEDEI 96307F $57.95
Starlite™ Solar Capacitor Model 120A capacitor stores the energy created from exposure to the sun, aswell as charges the rechargeable battery. On days when there isinsufficient sunlight to charge the battery, the capacitor re-energizesthe battery with what it has held in safe keeping so you never haveto go without light at night.Warranted for 5 years. Visible up to 1/2 mile.4.72” x 4.33” x .78”
Solar DockLiteTMThe wireless solar DockLite is easy to install. Its durable, weatherprooflow profile construction makes it an attractive and functional additionto Docks, Walkways, Decks and Landings. Ideal for illuminatingtrouble spots on pathways or transition areas such as from dock toshore. With extended duty solar charged batteries the DockLite willlast until sunrise. Automatic on-at-dusk.
ORDER NO. PRICEDEI 96255F $34.06
Solar LED PostLiteTM• Powerful solar charging performance• 6 possible colors to choose from• Change colors with a flip of a switch• Easy twist-on lid with large rubber seal• 360 lenticular light diffusing lens and
domed reflector maximize light output• Installs easily with no wires• Universal fittings for 1-5/8”,1-7/8”, 2-3/8”, Brock Post and 3-1/4” ID posts,universal flat surfaces
ORDER NO. PRICEDEI 96258F $89.45
Solar Dock CleatAttractive and Functional with Powerful Solar Charging Performance& Mooring Strength• Cast Aluminum Alloy Chassis• Wide, Sturdy Base footprint• 5 Super Bright white LEDs for side and base illumination
(18000 milli Candela each)• Polycarbonate side lenses• Epoxy Monocrystalline solar panel• Rechargeable, Replaceable AAA (Ni-MH) battery• Waterproof to Standard IP65• Up to 12 hours illumination from a single charge• Automatic On-At-Dusk• Viewing Distance up to 325 ft.• Optimal working temperature -4°F - 140°F• Dimensions: 10”W 3.9”D 3”H
ORDER NO. PRICEDEI 96288F $42.57
ORDER NO. PRICEDEI 96268F $44.31
Piling Cap Light• 360° Illumination• Automatic On-At-Dusk• Flat or Conical Mount• Weatherproof• Durable UV resistant ABS• Wildlife deterrent spike• Installs easily in minutes• Includes rechargeable AAA, Ni-Cd battery
6 PREINSTALLED LED Colors! ChangeColors ANY TIME!
ORDER NO. PRICEDEI 96257F $38.92
Pro DockLiteHeavy Duty Construction and Style. Perfect for:• Dock• Walkways• Decks• Landings• Durable, Weatherproof• Replaceable batteries
ORDER NO. PRICEDEI 96263F $42.83
Solar HD Aluminum Dock LiteLight up your dock, deck or pathways with this attractive, matte finishHi Intensity aluminum Solar Dock Lite.• Corrosion resistant aluminum• Brite White LEDs• Traffic Tolerant, Toe friendly design• Rechargeable batteries
FENDERS AND MOORING 511
DocKushionTMThe ultimate in protection systems. No need for fenders any more!This revolutionary design incorporates a soft expanded polypropylenecore surrounded by U.V. Stabilized integral skin foam. This creates thesoftest but most durable bumper you can treat your boat to. A molded
in backer allows strong secure mounting. Unique male and female
sockets at the ends make joining the pieces a snap for a seamless look.
Connect DocKushion lengths end-to-end for long runs. End caps andcorners complete your system for a professional, clean looking job.
ORDER NO. DESCRIPTION PRICEDEI 1150F DocKushion, Large, 48” $81.05
DEI 1151F DocKorner, Large, 9” $47.30
DEI 1152F DocKap, Large, (2 Pcs/Pk), 2” $34.01
DockSide Bumpers• The ultimate in heavy impact protection• Rugged, air filled Heavy-wall molded
PVC & integral inflation valve• Angled ends to deflect craft• Use Straight bumpers in pairs to form
inside corners
• Excellent gunnel protection
ORDER NO. DESCRIPTION PRICE
DEI 1060WF Dock Bumper,
7x16,White$40.85
DEI 1064WF Dock Bumper Corner,
12x12,White$66.97
Economy PVC Profiles “C” GuardThis economy “C” Shape co-extruded Profile is made to exactingstandards from Marine Grade PVC with UV Inhibitors and Fungicides.It will not crack or distort with temperature extremes. It can be used
on flat surfaces as well as on pilings. It comes in easy to install
6 Ft. lengths.
“P” Shape Dock GuardThe economy Dock Guard co-extruded Profile can be used in light tomedium duty applications. It features a raised lip for gunwale protec-
tion on Ski and Bass boats. Fabricated from Marine Grade PVC withUV Inhibitors and Fungicides. It comes in easy to install 6 Ft. lengths.
ORDER NO. PRICEDEI 1125F $16.69
ORDER NO. PRICEDEI 1126F $16.69
90 Degree Vinyl Corner BumperMade from the same tough PVC as our dock extrusions, this90 degree corner (outside) will protect your boat from this criti-cal point. Inside structural ribs provide the impact esistance
you need while it’s flush fit side sections give your installationthe “finished” appearance. Extrusions fit flush with 90 degreecut. Inside dimensions cover 6” each side.
ORDER NO. PRICETAY 46015 $18.64
ORDER NO. PRICEDEI 1059F $19.37
ProTect Corner Bumper 8”x8”This Heavy Duty Corner Bumper has excellent shock absorp-
tion qualities and will not mark or mar the hull of your boat. TheProTect Corner Bumpers also have many industrial applicationswhere cushioning and protection is required.
512 FENDERS AND MOORING
Nor’Easter Moor Whips
Commercial GradeSide Gard
ORDER NO. PRICETAY 46081 $20.96
ORDER NO. BOAT SIZE PRICEMON SE100 To 18’ $399.99
MON SE141 To 23’ $649.99
MON SE161 To 28’ $739.99
Small horizontal dockbumper for 2” edges.Particularly well suitedfor narrow edges onfloating docks.
ORDER NO. STD. PKG 24’
STD 750004553 - 8’ pcs. per
Tote-Pack 1-5/8”Wide, 5/8” High
PRICE
$110.96
Sold In-Std-Ctn Only
Price shown is per ctn.
Whips: Monarch Mooring Whips are made of solid fiberglass.
Bases: The patented Monarch Moor Whip Base is unique in its design. It is adjustable, universal, and practical--yet has no moving parts.TheBase can be mounted on the side of a piling, dock, or bulkhead – on the top of a dock, or bulkhead – or underneath the dock if necessary. It can bemounted in any combination of the horizontal, vertical, or upside down installation methods to meet your individual requirements.The Base can beadjusted to any angle to accommodate different heights, between the boat and dock, to provide the best leverage for the Mooring Whips.Monarch Moor Whips are designed to keep your boat safe in all types of weather. Insome instances it is advantageous to use a larger than suggested Moor Whip to meet yourparticular needs. In high turbulence areas, where strong winds; high traffic, or other condi-tions which create extremely rough water, we recommend using a larger Moor Whip.
ORDER NO. PRICEMON OO $466.99
MON O $649.99
MON OS $579.99
MON I $769.99
MON II $939.99
MON III $1,039.99
MINI MOOR WHIPS--Light to Medium Duty
Set OO (8’ poles) to 16’ boat
Set O (12’ poles) to 20’ boat
Set OS* (8’ poles) to 20’
STANDARD MOOR WHIPS--Heavy Duty
Set I (14’ poles) to 23’ boat
Set II (16’ poles) to 30’ boat
Set III (18’ poles) to 40’ boat
Dock ProTM Vinyl Corner Mount Dock BumperProtects the side and top of the dock with 1-1/4” cushion above docklevel. Made from the same tough marine grade vinyl as our fenders.Solid flaps attach easily to any dock. Superiorcushioning protects boats and docks from each other. Color ispermanently molded into the vinyl and will not transfer to the hull.Color: White. Size: 10” x 10”
Sou’Easter Moor WhipsSame High Quality in anEconomically Priced Unit
A one-piece, heavy-duty,non-adjustable unit composed ofAlmag, a Marine Grade Aluminumknown for it’s strength andcorrosion resistance.
*Most commonfor pontoon boats
Medium EdgeGard
Color: WhiteDimensions: 3-1/2”H x 1-1/2”W
C-Shape GardColor: WhiteDimensions: 3-5/8”H x 1-1/2”W
DockPro™ Vinyl Dock EdgingCommercial Grade Double Molded ProfilesSold in 10 ft. lenghts.
DESCRIPTIONSide Guard
P-Shape
Commercial GradeP-Shape
ORDER NO.TAY 46030TAY 46031TAY 46032 P-Shape
PRICE$46.49
$36.08
$37.98
DIMENSIONS3-1/2” H x 1-3/8” W
3-1/8” H x 2” W
3-5/8” H x 2-3/8” W
DESCRIPTION10’ Coil
25’ Coil
PRICE$31.98
$75.99
ORDER NO.TAY 46056TAY 46054
ORDER NO. PRICEDEI 1005F $31.18
Boat SaverTMDeveloped specifically for AIR CUSHION spot protection. It’s like havinga fender mounted just where you need one the most. Order severalfor complete protection. Can be mounted vertically or horizontally ondocks, pilings or boat houses. Combine with other DOCK EDGE+ highquality Profiles for total protection. 24” White Boat SaverTM
24”
2”
1”
ORDER NO.TAY 46096TAY 46098
DESCRIPTION10’ Coil
25’ Coil
PRICE$36.40
$87.35
2”
StanPro®
FENDERS AND MOORING 513
White Black
Dock BumpersPerimeter products utilize a 100% textile casing. Inaddition to being impervious to UV light and extremelyabrasion resistant, Perimeter products have excellentcleaning properties. All Perimeter products are backed bya 5 year unconditional guarantee.
Small Dock Bumper, White
Small Dock Bumper, White
Medium Dock Bumper, White
ORDER NO. DESCRIPTION LENGTH PRICE
TAY DB290 Small 3-5/8”W x 1-1/4”D 9’ $54.26
ORDER NO. DESCRIPTION LENGTH PRICETAY DB340 Medium 4-1/2”W x 1-3/4”D 4’ $46.84
TAY DB360 Medium 4-1/2”W x 1-3/4”D 6’ $61.01
TAY DB390 Medium 4-1/2”W x 1-3/4”D 9’ $81.80
Large Dock Bumper, White
X-Large Dock Bumper, White
ORDER NO. DESCRIPTION LENGTH PRICETAY DB660 X-Large 8-1/2”W x 3-1/4”D 6’ $182.19
TAY DB690 X-Large 8-1/2”W x 3-1/4”D 9’ $258.11
ORDER NO. DESCRIPTION LENGTH PRICETAY DB440 Large 5-3/4”W x 2-1/4”D 4’ $61.01
TAY DB490 Large 5-3/4”W x 2-1/4”D 9’ $109.59
TAY DB4CU25 Large 5-3/4”W x 2-1/4”D 25’ $274.79
TAY DB460 Large 5-3/4”W x 2-1/4”D 6’ $82.14
ORDER NO. PRICETAY CB420
SIZELg. 5-3/4” W x 2-1/4” D $47.32
Perimeter ProductsMade from a closed cell foam innercushion and a heavy-duty polyesterfabric that is guaranteed not todeteriorate in the sun or mar yourboat. Protective length of 12” oneither side allows for quick andeasy mounting around a corner orcurve. Backed by a 5 yearunconditional guarantee.
Removable Post BumpersMade out of the same high qual-ity materials as our Dock and PostBumper, Perimeter RemovablePost Bumper comes equippedwith polyester webbing and a
heavy-duty Delrin buckle system which allowsfor a quick, easy and secure installation.Simply wrap the webbing around the piling,snap the buckle and pull tight. When you’reready to depart, simply unbuckle and stow.
ORDER NO. PRICE
$64.20
LENGTH
3’TAY RPB430TAY RPB445 $78.064-1/2’
Piling CapsPiling caps are an inexpensive wayto prolong the life of your dockand bulkhead and protect againstweather and marine life. Thewhite caps are made of tough,UV-resistant TPR synthetic rubberand have an estimated life inexcess of 7 years.Color: white or black
ORDER NO. PRICESIZE
$9.737”MON WCPC7MON WCPC8 $10.118”
$10.118-1/2”MON WCPC85MON WCPC9 $10.659”
$11.1910”MON WCPC10MON WCPC11 $12.1511”
$17.8112”MON WCPC12MON WCPC13 $23.0013”
$25.3614”MON WCPC14
ORDER NO. SIZE PRICEMON BCPC8 8” $9.47
MON BCPC9 9” $9.92
MON BCPC10 10” $10.48
MON BCPC11 11” $11.49
MON BCPC12 12” $17.29
MON BCPC13 13” $22.39
MON BCPC14 14” $24.94
ORDER NO. DESCRIPTION PRICEDEI 1210F Heavy Slant “P” $54.22
DEI 1205F Heavy “D” $54.22
Heavy Slant “P” and Heavy “D”WhiteSold in 8’ lengthsThis exceptionally strong Profile is further reinforcedby two internal supports. Like all DOCK EDGE +Profiles, it is constructed of marine grade flexiblePVC, developed not to chip or crack under normalusage. Unaffected by oil, gas or salt water. UV andFungus Inhibitors prevent fading, yellowing,deterioration from sunlight and unsightly blotching.
514 FENDERS AND MOORING
Line-Master® Mooring SnubberEasy to fit, resilient and easily stowed aboard, Falcon Line-MasterMooring Snubbers cannot discolor or damage your boat, and they makestaying on board at slip or mooring more comfortable. Made of EPDMrubber, they are resistant to sunlight, salt water and ozone. UniqueLine-Master locking system consists of injection-moldednylon locking elements, vulcanized into the ends ofthe Snubber…perfect locking… no abrasion…nohardware or line knots needed. Variable resilience.
ORDER NO. DESCRIPTION PRICEFAL LLM1 For 3/8” line $38.89
FAL LLM2 For 5/8” line $52.25
FAL LLM3 For 3/4” line $71.93
Snubber gives safety stretch to mooring lines, absorbs shock ofwind and waves. Tough 3-rib neoprene withstands sun, salt, water.Use two for large boats.
ORDER NO. LENGTH PRICESTD 75000413 22” Long $24.49
The “Wave” Hull Gard® Dock EdgingThe Wave shape is 1/4” x 5” wide. This profile is a heavy-duty PVC strip that is designed to completely cover the
sides of your dock. The idea is to form a wave or loop shape with thisflexible extrusion and nail it down. By doing so, you create a bumpergrid with superior shock absorbing and protective ability. The wave isavailable in a 25’ coil and comes complete with mounting nails.
ORDER NO. PRICETAY 46069 $91.05
Dock Line SnubbersEPDM Rubber
ORDER NO. DESCRIPTION PRICE
SDG 561512 Fits 3/8” Line $25.25
SDG 561516 Fits 1/2” to 5/8” $37.25
SDG 561520 Fits 5/8” to 3/4” $49.95
Heavy Duty RadiusPiling FendersMonarch’s long lasting, highimpact, piling fender is ideal foreasy vertical mounting at marinasor home docks and has a tensilestrength 1300 psi. Color: White6-3/8” wide x 3-3/16” High
ORDER NO. LENGTH PRICE
MON DFR5W 5 Feet $84.95
MON DFR6W 6 Feet $101.94
MON DFR8W 8 Feet $135.92
ORDER NO. PRICEDAV 395 $29.99
Secure Removable Chafe GuardFits 3/8” to 7/8” line. Great for anchor lines or mooring pennants, wherechafing through a line could cost you the boat. Velcro® brand hookfasteners on the inside of the guard grip the line securely; no need foradditional strings or ties. Easily reposition when dock lines stretch andchafe protection needs to be moved. Made of nylon. Each chafe guardis 16” long. Sold in pairs.
Fits through chocks, will not split or rot in the sun.Polyester textile, NOT PVC, vinyl or rubber. Superiorabrasion resistant. Standard sizes sold in pairs withUV-resistant ties to secure installation.
ORDER NO. DESCRIPTION PRICETAY CG5818 3/8”-5/8” x 18” (pr) $18.75
Chafe Guard
StanPro®