feedthrough filter catalogue - manutech europe...17 sa 26 4nf -0/+100% pi-filter 33822001d 11 17 sa...
TRANSCRIPT
-
The Reliable Source . . .
FERROPERM
. . . for High Quality
Feed-through Capacitors,Pi-Filters and ArraysF
-
_____________________________________________________________________________
FERROPERM
_____________________________________________________________________________
_____________________________________________________________________________
FEEDTHROUGH FILTERS
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
from FERROPERM UK Ltd.
Introduction
This catalogue presents a survey of feedthrough filters from FERROPERM. These include capacitors and Pi-filters and are available a single items or as arrays. Whilst some of these are manufactured by FERROPERM many are produced by our associate company, EMC Filters ApS in Denmark. The scope of our filter production is constantly widening due to our commitment to research and development.
This brochure presents our standard filters plus some examples of custom designs. Whatever your requirement in filters, please ask us for a quotation. Selective filtering with a mixture of different filters in the same array can be produced.
Page 2UKEMC3a
CUSTOM FILTERSIf you w ould like us to design a filter (or filter array) to meet your requirements, please send us the follow ing information. If you do not have all the information available, please just give w hat you can.
1. Specify the application.
2. If you have a preference for a particular hardw are design please state it. Otherw ise, specify the maximum dimensions of the space you have available for the filter.
3. Specify any special physical requirements you may have for the filter. For instance, you might w ant IP64 rating or an explosion proof design.
4. Specify your estimated requirements of quantities and delivery dates both for short term and long term. This is important because it may influence w hat hardw are is specified for the design.
5. If you have a target or maximum price level, please state it.
6. Please specify the maximum operating currents and voltage. Please give as much detail as you can.
7. EITHER: Specify minimum required impedance at particular frequencies or sketch a graph of minimum required impedance versus frequency.
OR: Specify w hat filter elements (for instance, 2×1nF capacitance and 100nH inductance) you require.
Whilst every care w as taken to avoid any mistakes in the compilation of this catalogue, no responsibility can be assumed for any errors w hich may have occured in it. In line w ith Ferroperm's policy of continual development, Ferroperm reserves the right to alter specifications of any products w ithout notice.
p 3 Product Selector and Cross-Reference List pp 4-7. Single feedthrough capacitors. pp 8-24. Single feedthrough Pi-filters. pp 25-29. Arrays of feedthrough Pi-filters. back page Address and contact details.
http://www.ferroperm.co.ukmailto:[email protected]
-
FERROPERMPage 3 UKEMC3a
FEEDTHROUGH FILTERS
PRODUCT SELECTOR AND CROSS-REFERENCE LIST.
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
Ferroperm UK Ltd. Value Item EMC Filters A/S PagePart Number Part Number No.
17 SA 12 1nF-20+80% Feedthough capacitor 32812003S 617 SA 13 3nF -0+100% Pi filter 33822001S 1217 SA 17 1500pF GMV Pi-Filter 33824006S 2317 SA 20 10pF ± 10% Feedthough capacitor 31212001S 417 SA 21 470pF ± 20% Feedthough capacitor 32812001S 517 SA 22 56pF ±20% Feedthough capacitor 32813003S 717 SA 23 min. 2×1,5nF Pi-Filter 33821001D 817 SA 24 min. 2×1,0nF Pi-Filter 33821002D 917 SA 25 2nF -0/+100% Pi-Filter 33821003D 1017 SA 26 4nF -0/+100% Pi-Filter 33822001D 1117 SA 27 min. 2×1,5nF Pi-Filter 33822002D 1317 SA 28 3nF -50/+100% Pi-Filter 33822002S 1417 SA 29 min. 2×1,5nF Pi-Filter 33822003S 1517 SA 30 1,5nF -50/+100% Pi-Filter 33822004S 1617 SA 31 1600pF -0/+80% Pi-Filter 33823001D 1717 SA 32 min. 2×1,5nF Pi-Filter 33823002D 1817 SA 33 2nF -0/+100% Pi-Filter 33823003D 1917 SA 34 4nF -0/+100% Pi-Filter 33824001D 2017 SA 35 min 2×1,5nF Pi-Filter 33824002D 2117 SA 36 min 2×6,0nF Pi-Filter 33824003S 2217 SA 37 4nF -0/+100% Pi-Filter 33825001D 2417 SA 38 2×1nF GMV Filter Array, 2xPi 33826002S 2517 SA 39 2×1nF GMV Filter Array, 12x2xPi 33826004S 2617 SA 40 2×1nF GMV Filter Array, 12x2xPi 33826006S 2717 SA 41 2×1nF GMV Filter Array, 6x2xPi 33826007S 2817 SA 42 2×1nF GMV Filter Array, 3x2xPi 33826008S 29
http://www.ferroperm.co.ukmailto:[email protected]
-
28/2-2001
FEEDTHROUGH CAPACITOR
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
17 SA 20
Working voltage........................................................ 300VdcTest voltage............................................................... 900Vdc 1min.Insulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Class.......................................................................... 1BCapacitance.............................................................. 10pF ± 10%
EMC Filters' Pt.No. 31212001S
Page 4UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. Spec. 88081/3
17 SA 21
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
FEEDTHROUGH CAPACITOR
Working voltage........................................................ 220VdcTest voltage............................................................... 550VdcFeed-through current................................................ max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. 470pF ± 20%Marking...................................................................... noneCoating....................................................................... none
EMC Filters' Pt.No. 32812001S
Page 5 UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
1/3-2001
17 SA 12
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
FEEDTHROUGH CAPACITOR
Working voltage........................................................ 300VdcTest voltage............................................................... 900Vdc 1min.Insulation resistance................................................. min 5×103 MΩIEC category.............................................................. 55/085/56Class.......................................................................... 2F2Capacitance.............................................................. 1nF -20/+80%
EMC Filters' Pt.No. 32812003S
Page 6UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
19/3-2001
17 SA 22
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
FEEDTHROUGH CAPACITOR
Working voltage........................................................ 500VdcTest voltage............................................................... 1500Vdc 1min.Feed through current................................................. max 10AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. 56pF ±20%Class.......................................................................... 1B
Addition: delivered together with a hexagonal nut, loose, 6,35mm
EMC Filters' Pt.No. 32813003S
Page 7 UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. type 138.62002
17 SA 23
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
PI-FILTER
Working voltage........................................................ 250VdcTest voltage............................................................... 750Vdc 1min.Feed through current................................................. max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. min. 2×1,5nFInductance.................................................................. 1000nH -50/+100%Soldering Conditions................................................ max 250°CMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
EMC Filters' Pt.No. 33821001D
Page 8UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. type 138.62001
17 SA 24
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
PI-FILTER
Working voltage........................................................ 100VdcTest voltage............................................................... 250Vdc 1min.Feed through current................................................. max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. min. 2×1,0nFInductance.................................................................. min. 100nHMarking...................................................................... none
Attenuation (typical values) 1MHz 1dB 10MHz 10dB 100MHz 50dB1000MHz 80dB
EMC Filters' Pt.No. 33821002D
Page 9 UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. type 138.62001
17 SA 25
FERROPERM
PI-FILTER
Working voltage........................................................ 100VdcTest voltage............................................................... 250Vdc 1min.Feed through current................................................. max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance (total)................................................... 2nF -0/+100%Inductance.................................................................. 200nH -50/+100%Soldering Conditions................................................ max 250°CMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 10dB 100MHz 50dB1000MHz 80dB
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
EMC Filters' Pt.No. 33821003D
Page 10UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. type 138.64002
PI-filter for EX applications according to EN 50 020
17 SA 26
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
Working voltage........................................................ 250VdcTest voltage............................................................... 1500Vdc 1min. /
1060Vac 1min.Feed through current................................................. max 10AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance (total)................................................... 4nF -0/+100%Inductance.................................................................. 1000nH -50/+100%Soldering Conditions................................................ max 250°CMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
EMC Filters' Pt.No. 33822001D
Page 11 UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. Spec. 91244
17 SA 13
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
PI-FILTER
Working voltage........................................................ 250VdcTest voltage............................................................... 750Vdc 1min.Feed through current................................................. max 10AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance (total)................................................... 3nF -0/+100%Inductance.................................................................. 1000nH -50/+100%Soldering Conditions................................................ max 250°CMarking...................................................................... none
EMC Filters' Pt.No. 33822001S
Page 12UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. type 138.64001
17 SA 27
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
PI-FILTER
Working voltage........................................................ 250VdcTest voltage............................................................... 750Vdc 1min.Feed through current................................................. max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. min. 2×1,5nFInductance.................................................................. 1000nH -50/+100%Soldering Conditions................................................ max 250°CMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
EMC Filters' Pt.No. 33822002D
Page 13 UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. Spec. 91240/2
17 SA 28
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
PI-FILTER
Working voltage........................................................ 250VdcTest voltage............................................................... 750Vdc 1min.Feed through current................................................. max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance (total)................................................... 3nF -50/+100%Inductance.................................................................. 1000nH -50/+100%Soldering Conditions................................................ max 250°CMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
EMC Filters' Pt.No. 33822002S
Page 14UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. Spec. 95605
This filter is high temperature soldered.
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
PI-FILTER
17 SA 29
Working voltage........................................................ 250VdcTest voltage............................................................... 750Vdc 1min.Feed through current................................................. max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. min. 2×1,5nFInductance.................................................................. 1000nH -50/+100%Soldering Conditions................................................ max 250°CMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
EMC Filters' Pt.No. 33822003S
Page 15 UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
17 SA 30
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
PI-FILTER
Working voltage........................................................ 350VdcTest voltage............................................................... 700Vdc 1min.Feed through current................................................. max 10AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance (total)................................................... 1,5nF -50/+100%Inductance.................................................................. min 200nHSoldering Conditions................................................ max 250°CMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 15dB 100MHz 55dB1000MHz 80dB
EMC Filters' Pt.No. 33822004S
Page 16UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. type 138.66005
17 SA 31
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
PI-filter for EX applications according to EN 50 020
Working voltage........................................................ 350VdcTest voltage............................................................... 1700Vdc 1min. /
1060Vac 1min.Feed through current................................................. max 10AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance (total)................................................... 1600pF -0/+80%Inductance.................................................................. 1000nH -50/+100%Soldering Conditions................................................ max 250°CMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
EMC Filters' Pt.No. 33823001D
Page 17 UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. type 138.66002
17 SA 32
FERROPERM
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
PI-FILTER
Working voltage........................................................ 250VdcTest voltage............................................................... 750Vdc 1min.Feed through current................................................. max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. min. 2×1,5nFInductance.................................................................. 1000nH -50/+100%Marking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
EMC Filters' Pt.No. 33823002D
Page 18UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. type 138.66001
PI-FILTER
17 SA 33
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
FERROPERM
Working voltage........................................................ 100VdcTest voltage............................................................... 250Vdc 1min.Feed through current................................................. max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance (total)................................................... 2nF -0/+100%Inductance.................................................................. 200nH -50/+200%Marking...................................................................... none
Attenuation (typical values) 1MHz 1dB 10MHz 12dB 100MHz 50dB1000MHz 80dB
EMC Filters' Pt.No. 33823003D
Page 19 UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. type 138.66009
FERROPERM
PI-filter for EX applications according to EN 50 020
17 SA 34
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
Working voltage........................................................ 250VdcTest voltage............................................................... 1500Vdc 1min. /
1060Vac 1min.Feed through current................................................. max 10AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance (total)................................................... 4nF -0/+100%Inductance.................................................................. 1000nH -50/+100%Soldering Conditions................................................ max 250°CMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
EMC Filters' Pt.No. 33824001D
Page 20UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. type 138.68001
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
FERROPERM
PI-FILTER
17 SA 35
Working voltage........................................................ 250VdcTest voltage............................................................... 1000Vdc 1min.Feed through current................................................. max 10AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. min 2×1,5nFInductance.................................................................. 1000nH -50/+100%Soldering Conditions................................................ max 250ºCMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
EMC Filters' Pt.No. 33824002D
Page 21 UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
7/3-2001
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
FERROPERM
PI-FILTER
17 SA 36
Working voltage........................................................ 100VdcTest voltage............................................................... 250Vdc 1min.Feed through current................................................. max 10AInsulation resistance................................................. min 103 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. min 2×6,0nFInductance.................................................................. min 200nHMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 30dB 100MHz 75dB1000MHz 80dB
EMC Filters' Pt.No. 33824003S
Page 22UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
PI-FILTER
17 SA 17
ø0,8 tinned Cu
22,27,96,82,4
8-32 UNC-2A
4,75
ø1,5 min
Working voltage........................................................ 200VdcTest voltage............................................................... 500Vdc 1min.Feed through current................................................. max 10AInsulation resistance................................................. min 103 MΩIEC category.............................................................. 55/125/56Capacitance.............................................................. min 2×1,0nFInductance.................................................................. min 100nHMarking...................................................................... noneMounting Torque........................................................ 0.6Nm
Attenuation (typical values) 1MHz 2dB 10MHz 20dB 100MHz 50dB
1000MHz 80dB
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
FERROPERMPage 23 UKEMC3a
EMC Filters' Pt.No. 33824006S
http://www.ferroperm.co.ukmailto:[email protected]
-
Corresponding to F.C. type SPPL4715
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
FERROPERM
PI-filter for EX applications according to EN 50 020
17 SA 37
UKEMC3a
Working voltage........................................................ 250VdcTest voltage............................................................... 1500Vdc 1min. /
1060Vac 1min.Feed through current................................................. max 10AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. 4nF -0/+100%Inductance.................................................................. 1000nH -50/+100%Soldering Conditions................................................ 250ºCMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
EMC Filters' Pt.No. 33825001S
Page 24UKEMC3a
http://www.ferroperm.co.ukmailto:[email protected]
-
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
UKEMC3aPage 25 FERROPERM
Filter Array, 2xPi
17 SA 38
Working voltage........................................................ 100VdcTest voltage............................................................... 250VdcFeed through current................................................. max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. 2×1nF GMVInductance.................................................................. 100nH GMVMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
Groundplate: Nickel-silver, Sn-platedConnectorpin: Brass, Ni-plated,Au-plated* Coating: SB 240 Blue Dipping grade from ESLSolderjoint between Groundplate and filter: Sn62
EMC Filters' Pt.No. 33826002S
*Coating
ø3,30+-0,1
R 1,0
13,50+-0,15
11,05+-0,15
8,02+-0,15
14,5
0+-0
,15
5,48+-0,15
12,0
0+-0
,15
2,45+-0,15
21,8+-0,5
0,50
10,6+-0,5
4,80
+-0
,15
http://www.ferroperm.co.ukmailto:[email protected]
-
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
UKEMC3a Page 26FERROPERM
Filter Array, 12x2xPi
17 SA 39
Working voltage........................................................ 100VdcTest voltage............................................................... 250VdcFeed through current................................................. max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. 2×1nF GMVInductance.................................................................. 100nH GMVMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 20dB 100MHz 50dB1000MHz 80dB
Groundplate: Nickel-silver, Sn-platedConnectorpin: Brass, Ni-plated, Au-plated* Coating: SB 240 Blue Dipping grade from ESLSolderjoint between Groundplate and filter: Sn62
EMC Filters' Pt.No. 33826004S
0,50
12,5+-0,512,5+-0,5
9,73
+-0
,15
12,2
7+-0
,15
18,5
0+-0
,15
22,0
0+-0
,15
3,50
+-0
,15
4,00+-0,15
5,03+-0,15
34,00+-0,15
38,00+-0,15
ø3,2
0+0,
10/-0
,05
R2(X
4)
*Coating ø 0,635
http://www.ferroperm.co.ukmailto:[email protected]
-
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
FERROPERMPage 27 UKEMC3a
Filter Array, 12x2xPi
17 SA 40
Working voltage........................................................ 100VdcTest voltage............................................................... 250VdcFeed through current................................................. max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. 2×1nF GMVInductance.................................................................. 100nH GMVMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
Groundplate: Nickel-silver, Sn-platedConnectorpin: Brass, Ni-plated, Au-plated* Coating: SB 240 Blue Dipping grade from ESLSolderjoint between Groundplate and filter: Sn62
EMC Filters' Pt.No. 33826006S
0,50
20,0+-0,520,0+-0,5
11,2
3+-0
,15
13,7
7+-0
,15
20,0
0+-0
,15
25,0
0+-0
,15
5,00
+-0
,15
3,80+-0,15
2,54 x 11
31,74+-0,15
35,54+-0,15
ø4,
0+0,
10/-0
,05
R2(X
4)
*Coating
http://www.ferroperm.co.ukmailto:[email protected]
-
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
FERROPERM Page 28UKEMC3a
Filter Array, 6x2xPi
17 SA 41
Working voltage........................................................ 100VdcTest voltage............................................................... 250VdcFeed through current................................................. max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. 2×1nF GMVInductance.................................................................. 100nH GMVMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
Groundplate: Nickel-silver, Sn-platedConnectorpin: Brass, Ni-plated, Au-plated* Coating: SB 240 Blue Dipping grade from ESLSolderjoint between Groundplate and filter: Sn62
EMC Filters' Pt.No. 33826007S
0,50
20,0+-0,520,0+-0,5
11,2
3+-0
,15
13,7
7+-0
,15
20,0
0+-0
,15
25,0
0+-0
,15
5,00
+-0
,15
5,00+-0,15
2,54x517,70+-0,15
22,70+-0,15
ø4,
0+0,
10/-0
,05
R2(X
4)
*Coating
http://www.ferroperm.co.ukmailto:[email protected]
-
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 http://w w w .ferroperm.co.uk Email [email protected]
FERROPERMPage 29 UKEMC3a
Filter Array, 3x2xPi
17 SA 42
Working voltage........................................................ 100VdcTest voltage............................................................... 250VdcFeed through current................................................. max 5AInsulation resistance................................................. min 104 MΩIEC category.............................................................. 55/085/56Capacitance.............................................................. 2×1nF GMVInductance.................................................................. 100nH GMVMarking...................................................................... none
Attenuation (typical values) 1MHz 2dB 10MHz 25dB 100MHz 65dB1000MHz 80dB
Groundplate: Nickel-silver, Sn-platedConnectorpin: Brass, Ni-plated, Au-plated* Coating: SB 240 Blue Dipping grade from ESLSolderjoint between Groundplate and filter: Sn62
EMC Filters' Pt.No. 33826008S
0,50
20,0+-0,520,0+-0,5
11,2
3+-0
,15
13,7
7+-0
,15
20,0
0+-0
,15
25,0
0+-0
,15
5,00
+-0
,15
5,00+-0,15
7,54+-0,15
10,08+-0,15
15,08+-0,15
ø4,0
+0,
10/-0
,05
R2(X
4)
*Coating
http://www.ferroperm.co.ukmailto:[email protected]
-
The Reliable Source . . .
FERROPERM. . . serving the
electronics industry
Catch us on the web athttp://www.ferroperm.co.uk
Email us [email protected]
Other products from Ferroperm include . . .
Filtered Connectors
Inductors and chokes
Small Transformers (all types except 50/60 Hz "mains")
FERROPERM UK LTD.Vauxhall Industrial Estate,Ruabon, Wrexham,Clwyd LL14 6HA.United Kingdom.Phone +44 1978 823 990Fax +44 1978 810 128 F
http://www.ferroperm.co.ukmailto:[email protected]