features & specifications · maintenance. the led igimbal is intended for sloped ceiling...

4
4iG IC/Non-IC Retrofit iGimbal Specifications Aperture: 2-11/16 (6.8) Ceiling opening: as rough-in Height: 4-1/8 (10.5) Overlap trim: 5-1/8 (13.0) All dimensions are inches (centimeters) unless otherwise indicated. FEATURES & SPECIFICATIONS INTENDED USE — The adjustable LED iGimbal downlighting module is 80% more efficient than incan- descent luminaries, performing for 35,000 hours or more with exceptional energy efficiency and near zero maintenance. The LED iGimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, and highlighting artwork or other architectural features. Retrofits into most existing recessed downlighting installations or new construction and remodel applications. CONSTRUCTION — Spun steel gimbal reflectors with 360° of rotation and at least 50° of adjustable tilt in both directions. Driver affixed to a static yoke to allow maximization of LED light engine rotation and pivot movements. OPTICS — Diffused lens at end of mixing chamber to provide even light distribution for general illumina- tion, equivalent to 50W incandescent flood lamp. Utilizes 2700K, 3000K and 4000K color temperature LEDs. CRI – 90+. The LED module maintains at least 70% light output for 35,000 hours. ELECTRICAL — Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 15%. INSTALLATION — Suitable for installation in standard height rough-in sections. Splice kit ships stan- dard. This enables easy installation or permanent conversion to an LED source for Title 24 compliance. Includes three friction clips to ensure easy installation. LISTINGS — ETL certified to US and Canadian safety standards. FCC Certified. ENERGY STAR® certified; Certified to the high efficacy requirements of California T24. Damp location listed. WARRANTY — 5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. Notes 1 Minimum 90-day lead time for non-standard color finishes in 2700K, 3000K, and 4000K color temperatures. Minimum 50 piece order quantity. 2 Total system delivered lumens. 3 Must be ordered on a separate line. 4 To install LED iGimbal, remove sockets and assemble leaving socket wires. Install using hardwire kit provided. DOWNLIGHTING 4iGLED iGIMBAL D I M M A B L E 4iG LED Series/Finish Lamp CCT/CRI/W/Lumens 2 Voltage Options 4iG 4" iGimbal module MW Matte white MB Matte black BN Brush nickel 1 ORB Oil-rubbed bronze 1 LED 27K 90CRI 2700K/92CRI/9.8W/610L 30K 90CRI 3000K/92CRI/9.8W/640L 40K 90CRI 4000K/94CRI/9.8W/670L (blank) 120V L3LED T24 IC/Non-IC rated, new construction rough-in LED base L3RLED T24 IC/Non-IC rated, remodel rough-in LED base L3 IC/Non-IC rated, new construction rough-in 3,4 L3R IC/Non-IC rated, remodel rough-in 3,4 ORDERING INFORMATION For shortest lead times, configure product using standard options (shown in bold). Example: 4iGMW LED 27K 90CRI L3LED T24 Catalog Number Notes Type 4-1/8 (10.5) 2-11/16 (6.8) 2-15/16 (7.5) 5-1/8 (13.0) 360° 50° Splice Kit (included) MW MB ORB BN

Upload: others

Post on 17-Oct-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: FEATURES & SPECIFICATIONS · maintenance. The LED iGimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, and highlighting artwork or other architectural

4iGIC/Non-IC

Retrofit iGimbal

Specifications

Aperture: 2-11/16 (6.8)

Ceiling opening: as rough-in

Height: 4-1/8 (10.5)

Overlap trim: 5-1/8 (13.0)

All dimensions are inches (centimeters) unless otherwise indicated.

FEATURES & SPECIFICATIONSINTENDED USE — The adjustable LED iGimbal downlighting module is 80% more efficient than incan-descent luminaries, performing for 35,000 hours or more with exceptional energy efficiency and near zero maintenance. The LED iGimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, and highlighting artwork or other architectural features. Retrofits into most existing recessed downlighting installations or new construction and remodel applications.

CONSTRUCTION — Spun steel gimbal reflectors with 360° of rotation and at least 50° of adjustable tilt in both directions. Driver affixed to a static yoke to allow maximization of LED light engine rotation and pivot movements.

OPTICS — Diffused lens at end of mixing chamber to provide even light distribution for general illumina-tion, equivalent to 50W incandescent flood lamp. Utilizes 2700K, 3000K and 4000K color temperature LEDs. CRI – 90+. The LED module maintains at least 70% light output for 35,000 hours.

ELECTRICAL — Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 15%.

INSTALLATION — Suitable for installation in standard height rough-in sections. Splice kit ships stan-dard. This enables easy installation or permanent conversion to an LED source for Title 24 compliance. Includes three friction clips to ensure easy installation.

LISTINGS — ETL certified to US and Canadian safety standards. FCC Certified. ENERGY STAR® certified; Certified to the high efficacy requirements of California T24. Damp location listed.

WARRANTY — 5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.

Notes

1 Minimum 90-day lead time for non-standard color finishes in 2700K, 3000K, and 4000K color temperatures. Minimum 50 piece order quantity.

2 Total system delivered lumens.

3 Must be ordered on a separate line.

4 To install LED iGimbal, remove sockets and assemble leaving socket wires. Install using hardwire kit provided.

DOWNLIGHTING 4iGLED iGIMBAL

DIM

MABLE

4iG LED

Series/Finish Lamp CCT/CRI/W/Lumens2 Voltage Options

4iG 4" iGimbal module MW Matte whiteMB Matte blackBN Brush nickel1

ORB Oil-rubbed bronze1

LED 27K 90CRI 2700K/92CRI/9.8W/610L30K 90CRI 3000K/92CRI/9.8W/640L40K 90CRI 4000K/94CRI/9.8W/670L

(blank) 120V L3LED T24 IC/Non-IC rated, new construction rough-in LED base

L3RLED T24 IC/Non-IC rated, remodel rough-in LED base

L3 IC/Non-IC rated, new construction rough-in3,4

L3R IC/Non-IC rated, remodel rough-in3,4

ORDERING INFORMATION For shortest lead times, configure product using standard options (shown in bold). Example: 4iGMW LED 27K 90CRI L3LED T24

Catalog Number

Notes

Type

°

4-1/8 (10.5)

2-11/16 (6.8)2-15/16 (7.5)5-1/8 (13.0)

360°

50°

Splice Kit (included)

MW MB ORB BN

Page 2: FEATURES & SPECIFICATIONS · maintenance. The LED iGimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, and highlighting artwork or other architectural

4iG 4" LED iGimbal Module

PHOTOMETRICS

4iGMW LED, 3000 K LEDs, input watts: 9.6, delivered lumens: 693, LM/W=72, test no. LTL28994, tested in accordance with IESNA LM 79-80.

Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30” Above Floor for a Single Luminaire

0° 20°

40°

60°

80°

200

400

600

800

Ave Lumens05152535455565758590

89185763137315536135200

79175170983112520

Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°

90° - 180°0° - 180°

422.7520.5563.5570.80.0

570.8

74.191.298.7100.00.0

*100.0*Efficiency

%02fppc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910

1191111039790858076726865

119108999285797470666259

119106968881757066625855

1161091029589847975716764

116106989184797469656259

116104958780757066625855

111105989387827874706663

111103958983787369656158

111101938679746965615855

RC

R

50% beam -37.9°

10% beam -69.4°

MountingHeight

Inital FCCenterBeam Diameter FC Diameter FC

8.010.012.014.016.0

29.515.89.96.74.9

3.85.16.57.99.3

14.77.94.93.42.4

7.610.413.215.918.7

2.91.61.00.70.5

4iGMW LED, 2700 K LEDs, input watts: 9.6, delivered lumens: 623, LM/W=65, test no. LTL28994P1, tested in accordance with IESNA LM 79-80.

4iGMW LED, 4000 K LEDs, input watts: 9.6, delivered lumens: 682, LM/W=71, test no. LTL28994P2, tested in accordance with IESNA LM 79-80.

Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30” Above Floor for a Single Luminaire

Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30” Above Floor for a Single Luminaire

0° 20°

40°

60°

80°

90°

°09°0°0°0

180°

300

600

900

1200

1500

Coefficients of Utilizationpf 20%pc 80% 70% 50%pw 70%50%30% 50%30%10% 50%30%10%

119114109105100969289858279

1191121059994898480777370

1191091019589847975726865

1161091039893888480767370

1161071009488837975716865

116106979085807571686562

1111051009590868279757269

111104979287827874716865

111102958984797571686562

RC

R0123456789

10

Zonal Lumen SummaryZone Lumens % Lamp % Fixture0° - 30°0° - 40°0° - 60°0° - 90°90° - 180°0° - 180°

5075976186220

622

81.496.099.4

100.00.0

100.0

81.496.099.4

100.00.0

100.0

CP Summary0° 90

0°5°15°25°35°45°55°65°75°85°90

164214927663431441653100

164214967723541541652000

0° 20°

40°

60°

80°

600

1200

1800

Ave Lumens05152535455565758590

180016388433861641863100

143234178100176310

Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°

90° - 180°0° - 180°

555.5655.0678.0682.40.0

682.4

81.496.099.4100.00.0

*100.0*Efficiency

Coefficients of Utilization%02fp

pc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910

1191121059994898480777370

1191091019589847975726865

119107989185807572686562

1161091039893888480767370

1161071009488837975716865

116106979085807571686562

1111051009590868279757269

111104979287827874716865

111102958984797571686562

RC

R

50% beam -26.5°

10% beam -59.3°

MountingHeight

Inital FCCenterBeam Diameter FC Diameter FC

8.010.012.014.016.0

59.532.019.913.69.9

2.63.54.55.46.4

29.716.010.06.84.9

6.38.510.813.115.4

6.03.22.01.41.0

4iG LED iGIMBAL

DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2015-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/26/17

Page 3: FEATURES & SPECIFICATIONS · maintenance. The LED iGimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, and highlighting artwork or other architectural

4iG 4" LED iGimbal Module

ENERGY DATA*

Lumens 610 640 670

Watts 9.8 9.8 9.8

LPW 62 65 68

CRI 92 92 94

Color Temp 2700 3000 4000

Minimum Starting Temp 0°F (-18°C) 0°F (-18°C) 0°F (-18°C)

EMI/RFI FCC Title 47 CFR, Part 15, Class B FCC Title 47 CFR, Part 15, Class B FCC Title 47 CFR, Part 15, Class B

Min. Power Factor 0.90 0.90 0.90

Input current 0.08A 0.08A 0.08A

*Values at non-dimming line voltage.

COMPATIBLE DIMMER SWITCHES

Manufacturer Model/Series Part Numbers Type

Sensor Switch nLightnSP5 PCD 2W 2-Way 575W Incandescent

nSP5 PCD ELV 120 475W Electronic Low Voltage

Pass & Seymour Harmony HCL453PTCCCV6 3-Way 450W LED and CFL

Leviton Sure Slide™ Decora 6633-P 3-Way 600W Incandescent

Lutron

Nova T NTELV-300P 300W Electronic Low Voltage

Diva DVELV-300P Single-pole, 300W, ELV

Ariandni C-L AYCL-153P-WH 150W CFL/LED or 600W incandescent

Insteon Insteon 2477D Single-pole & 3-way, 600W, ELV

DIMMING AND ENERGY DATA

When installing the LED Modules on a run with a dimmer, please use the following rule of thumb when determining the number of fixtures controlled by a single dimmer:

• Figure that each LED fixture represents a 65 Watt load• Divide the maximum load of the dimmer by 65 watt fixture load. (round down to the nearest whole number).

Example:Dimmer max load=600 wattsLED fixture load=65 watts600 watts/65 watts per fixture=9 fixtures per run

4iG LED iGIMBAL

DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2015-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/26/17

Page 4: FEATURES & SPECIFICATIONS · maintenance. The LED iGimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, and highlighting artwork or other architectural

4iG 4" LED iGimbal Module

4iG LED iGIMBAL

DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2015-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/26/17