features & specifications · downlighting 6bp-6op led features & specifications intended...

4
DOWNLIGHTING 6BP-6OP LED FEATURES & SPECIFICATIONS INTENDED USE — Our recessed LED module is the most economical means to create a well lit environ- ment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing downlight cans or new construction and remodel applications. Unique torsion spring and friction clip retention allows fitment into nearly 100% of installed cans. The LED module maintains at least 70% light output for 50,000 hours. CONSTRUCTION Aluminum die cast reflector with deep baffle configuration for reduced glare. Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the pressed-in diffused lens. Baffle and open trim inserts are available in multiple finishes. OPTICS — Diffused lens at end of mixing chamber to provide even light distribution for general illumina- tion, equivalent to 65W BR30 or 100W BR30 lamp. Wide flood beam angle at >45°. ELECTRICAL Center 2 Edge™ (patent pending) technology created for a single point source. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 10%. For compatible dimmers, refer to Compatible Dimmers Chart. 725-lumen P series has an input wattage of 12.7 watts, 57 lumens per watt, equivalent to 65-watt incandescent. P Series’ patent pending driver has zero inrush, which allows power loads to be calculated with actual rated wattages. Example: 47 units of 6BPMW LED fixtures can be installed in line with a 600-watt dimmer. 600W/12.7W = 47 fixtures. 950-lumen P series has an input wattage of 15.2 watts, 63 lumens per watt, equivalent to 100-watt incandescent. INSTALLATION — Suitable for installation in standard and shallow-height rough-in sections. E26 socket adapter and splice kit ships standard. This enables easy installation or permanent conversion to an LED source for Title 24 compliance. Twin torsion springs ensure easy installation. Friction clips included to allow fitment into cans without torsion brackets from an inside diameter of 6.0” to 7.0”. LISTINGS — CSA certified to US and Canadian safety standards. California T24 compliant. Wet location listed for indoor use only. WSEC ASTM E283 for Air-Tight (with IC housings). ENERGY STAR® certified product. WARRANTY — 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. PATENTS PENDING. Accessories: Order as separate catalog number. TSA6 Makes non-bracket housing compatible with the LED module; ships as units, J6 or J25 FL2LED Makes L7XF housings compatible with the LED module Torsion mount shown Friction clip shown (included) 5-7/8 (14.9) 3-7/8 (9.8) 7-5/8 (19.4) Specifications Aperture: 5-7/8 (14.9) Ceiling opening: Determined by rough-in Overlap trim: 7-5/8 (19.4) Height: 3-7/8 (9.8) LED Recessed Downlighting 6BP/6OP 6” LED Module IC/Non-IC Retrofit D I M M A B L E E26 adaptor (included) Splice kit (included) All dimensions are inches (centimeters) unless otherwise indicated. Notes 1 Total system delivered lumens. 2 Must be ordered on a separate line. See page 2 for Trim Inserts. ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: 6BP TRMW LED 27K 90CRI Series/Finish Lamp CCT / CRI / W / Lumens 1 Voltage Options 6BPMW 6" Baffle LED module, matte white 6BP TRMW 6" Baffle LED module, black baffle, matte white flange 6BPBN 6" Baffle LED module, brushed nickel 6BPORB 6" Baffle LED module, oil-rubbed bronze LED HL LED (blank) 3000 K / 83 CRI / 12.7W / 725L 27K 90CRI 2700 K / 93 CRI / 10.25W / 600L 30K 90CRI 3000 K / 93 CRI / 10.25W / 600L 40K 90CRI 4000K / 92CRI / 9.9W / 650L (blank) 3000 K / 83 CRI / 15.2W / 950L 27K 90CRI 2700 K / 93 CRI / 16.7W / 860L 30K 90CRI 3000 K / 93 CRI / 16.7W / 860L 40K 90CRI 4000K / 92CRI / 16.4W / 950L (blank) 120V L7XLED T24 New construction rough-in LED base L7XRLED T24 Remodel rough-in LED base LC6LED T24 New construction rough-in LED base L7X New construction rough-in 2 L7XR Remodel rough-in 2 L7XP New construction shallow rough-in 2 L7XPR Remodel shallow rough-in 2 LC6 New construction rough-in 2 LCP New construction shallow rough-in 2 6OPA 6" Open LED module, clear diffuse 6OPAZ 6" Open LED module, clear specular 6OPA TRMW 6" Open LED module, clear diffuse, matte white flange 6OPAZ TRMW 6" Open LED module, clear specular, matte white flange LED HL LED (blank) 3000 K / 83 CRI / 12.7W / 725L 27K 90CRI 2700 K / 93 CRI / 10.25W / 600L 30K 90CRI 3000 K / 93 CRI / 10.25W / 600L 40K 90CRI 4000K/ 92CRI / 9.9W / 650L (blank) 3000 K / 83 CRI / 15.2W / 950L 27K 90CRI 2700 K / 93 CRI / 16.7W / 860L 30K 90CRI 3000 K / 93 CRI / 16.7W / 860L 40K 90CRI 4000K/ 92CRI / 16.4W / 950L (blank) 120V L7XLED T24 New construction rough-in LED base L7XRLED T24 Remodel rough-in LED base LC6LED T24 New construction rough-in LED base L7X New construction rough-in 2 L7XR Remodel rough-in 2 L7XP New construction shallow rough-in 2 L7XPR Remodel shallow rough-in 2 LC6 New construction rough-in 2 LCP New construction shallow rough-in 2 Catalog Number Notes Type

Upload: others

Post on 14-Oct-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: FEATURES & SPECIFICATIONS · DOWNLIGHTING 6BP-6OP LED FEATURES & SPECIFICATIONS INTENDED USE — Our recessed LED module is the most economical means to create a well lit environ

DOWNLIGHTING 6BP-6OP LED

FEATURES & SPECIFICATIONSINTENDED USE — Our recessed LED module is the most economical means to create a well lit environ-ment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing downlight cans or new construction and remodel applications. Unique torsion spring and friction clip retention allows fitment into nearly 100% of installed cans. The LED module maintains at least 70% light output for 50,000 hours.CONSTRUCTION — Aluminum die cast reflector with deep baffle configuration for reduced glare. Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the pressed-in diffused lens.Baffle and open trim inserts are available in multiple finishes.OPTICS — Diffused lens at end of mixing chamber to provide even light distribution for general illumina-tion, equivalent to 65W BR30 or 100W BR30 lamp.Wide flood beam angle at >45°.ELECTRICAL — Center 2 Edge™ (patent pending) technology created for a single point source. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 10%. For compatible dimmers, refer to Compatible Dimmers Chart.725-lumen P series has an input wattage of 12.7 watts, 57 lumens per watt, equivalent to 65-watt incandescent.P Series’ patent pending driver has zero inrush, which allows power loads to be calculated with actual rated wattages.Example: 47 units of 6BPMW LED fixtures can be installed in line with a 600-watt dimmer. 600W/12.7W = 47 fixtures.950-lumen P series has an input wattage of 15.2 watts, 63 lumens per watt, equivalent to 100-watt incandescent. INSTALLATION — Suitable for installation in standard and shallow-height rough-in sections.E26 socket adapter and splice kit ships standard. This enables easy installation or permanent conversion to an LED source for Title 24 compliance.Twin torsion springs ensure easy installation.Friction clips included to allow fitment into cans without torsion brackets from an inside diameter of 6.0” to 7.0”.LISTINGS — CSA certified to US and Canadian safety standards. California T24 compliant. Wet location listed for indoor use only. WSEC ASTM E283 for Air-Tight (with IC housings). ENERGY STAR® certified product.WARRANTY — 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspxNote: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C.Specifications subject to change without notice.PATENTS PENDING.

Accessories: Order as separate catalog number.

TSA6 Makes non-bracket housing compatible with the LED module; ships as units, J6 or J25FL2LED Makes L7XF housings compatible with the LED module

Torsion mount shown

Friction clip shown (included)

5-7/8(14.9)

3-7/8(9.8)

7-5/8(19.4)

SpecificationsAperture: 5-7/8 (14.9)Ceiling opening: Determined by rough-inOverlap trim: 7-5/8 (19.4)Height: 3-7/8 (9.8)

LED Recessed Downlighting

6BP/6OP6” LED Module

IC/Non-IC Retrofit

DIM

MABLE

E26 adaptor(included)

Splice kit(included)

All dimensions are inches (centimeters) unless otherwise indicated.

Notes 1 Total system delivered lumens.2 Must be ordered on a separate line.

See page 2 for Trim Inserts.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: 6BP TRMW LED 27K 90CRI

Series/Finish Lamp CCT / CRI / W / Lumens1 Voltage Options

6BPMW 6" Baffle LED module, matte white6BP TRMW 6" Baffle LED module, black baffle, matte

white flange6BPBN 6" Baffle LED module, brushed nickel6BPORB 6" Baffle LED module, oil-rubbed bronze

LED

HL LED

(blank) 3000 K / 83 CRI / 12.7W / 725L27K 90CRI 2700 K / 93 CRI / 10.25W / 600L30K 90CRI 3000 K / 93 CRI / 10.25W / 600L40K 90CRI 4000K / 92CRI / 9.9W / 650L

(blank) 3000 K / 83 CRI / 15.2W / 950L27K 90CRI 2700 K / 93 CRI / 16.7W / 860L30K 90CRI 3000 K / 93 CRI / 16.7W / 860L40K 90CRI 4000K / 92CRI / 16.4W / 950L

(blank) 120V L7XLED T24 New construction rough-in LED baseL7XRLED T24 Remodel rough-in LED baseLC6LED T24 New construction rough-in LED baseL7X New construction rough-in2

L7XR Remodel rough-in2

L7XP New construction shallow rough-in2

L7XPR Remodel shallow rough-in2

LC6 New construction rough-in2

LCP New construction shallow rough-in2

6OPA 6" Open LED module, clear diffuse6OPAZ 6" Open LED module, clear specular6OPA TRMW 6" Open LED module, clear diffuse, matte

white flange6OPAZ TRMW 6" Open LED module, clear specular, matte

white flange

LED

HL LED

(blank) 3000 K / 83 CRI / 12.7W / 725L27K 90CRI 2700 K / 93 CRI / 10.25W / 600L30K 90CRI 3000 K / 93 CRI / 10.25W / 600L40K 90CRI 4000K/ 92CRI / 9.9W / 650L

(blank) 3000 K / 83 CRI / 15.2W / 950L27K 90CRI 2700 K / 93 CRI / 16.7W / 860L30K 90CRI 3000 K / 93 CRI / 16.7W / 860L40K 90CRI 4000K/ 92CRI / 16.4W / 950L

(blank) 120V L7XLED T24 New construction rough-in LED baseL7XRLED T24 Remodel rough-in LED baseLC6LED T24 New construction rough-in LED baseL7X New construction rough-in2

L7XR Remodel rough-in2

L7XP New construction shallow rough-in2

L7XPR Remodel shallow rough-in2

LC6 New construction rough-in2

LCP New construction shallow rough-in2

Catalog Number

Notes

Type

Page 2: FEATURES & SPECIFICATIONS · DOWNLIGHTING 6BP-6OP LED FEATURES & SPECIFICATIONS INTENDED USE — Our recessed LED module is the most economical means to create a well lit environ

6” LED Module

6BP-6OP LED

DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2013-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/28/17

TRIM INSERTS

TRIM INSERTS (for field configuration; ordered separately)

Series/Finish Packaging

6BP TRMW 6” Baffle black, matte white flange insert6BPBN 6” Baffle brush nickel insert6BPORB 6” Baffle oil-rubbed bronze insert6OPA 6” Open clear diffuse insert

6OPAZ 6” Open clear specular insert6OPA TRMW 6” Open clear diffuse, matte white flange insert6OPAZ TRMW 6” Open clear specular, matte white flange insert

R12 Retail pack of 12 units

U Unit

Example: 6BP TRMW R12

Black Baffle with Mattte White Trim Ring (TRMW)

Brushed Nickel Baffle (BN) Oil-rubbed Bronze Baffle (ORB)

Clear Diffuse with Matte White Trim Ring (A TRMW)

Clear Diffuse (A) Clear Specular with Matte White Trim Ring (AZ TRMW)

Clear Specular (AZ)

ADDITIONAL DATA

ENERGY DATA* - 3000K Standard Lumens

CRI - 83 CRI - 93

Lumens 725 600

Min. starting temp -18°C (0°F) -18°C (0°F)

Max. temp 46°C (115°F) 46°C (115°F)

EMI/RFI FCC Title 47 CFR, Part 15, Class B FCC Title 47 CFR, Part 15, Class B

Sound rating A standards A standards

Input voltage 120V 120V

Min. power factor 0.97 0.97

Input frequency 50/60 Hz 50/60 Hz

Rated wattage 12.7W 10.5W

Input power 12.7W 10.5W

Input current .11A .09A*Values at non-dimming line voltage.

ENERGY DATA* - 3000K Hi Lumens

CRI - 83 CRI - 93

Lumens 950 860

Min. starting temp -18°C (0°F) -18°C (0°F)

Max. temp 46°C (115°F) 46°C (115°F)

EMI/RFI FCC Title 47 CFR, Part 15, Class B FCC Title 47 CFR, Part 15, Class B

Sound rating A standards A standards

Input voltage 120V 120V

Min. power factor 0.97 0.97

Input frequency 50/60 Hz 50/60 Hz

Rated wattage 15.2W 16.7W

Input power 15.2W 16.7W

Input current .13A .14A*Values at non-dimming line voltage.

Trim finish Lumen multiplierMatte White 1.00 (Baseline)Clear Diffuse 0.99Clear Specular 0.99Brushed Nickel 0.83Black Baffle 0.76Oil Rubbed Bronze 0.78

Color temperature Lumen multiplier2700K 0.973000K 1.00 (Baseline)4000K 1.08

Page 3: FEATURES & SPECIFICATIONS · DOWNLIGHTING 6BP-6OP LED FEATURES & SPECIFICATIONS INTENDED USE — Our recessed LED module is the most economical means to create a well lit environ

6” LED Module

6BP-6OP LED

DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2013-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/28/17

Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30” Above Floor for a Single Luminaire

6BPMW LED, 3000 K LEDs, input watts: 12.7, delivered lumens: 703, LM/W=55.4 , test no. LTL25711P, tested in accordance with IESNA LM 79-08

PHOTOMETRICS

6BPMW LED 90CRI, 3000 K LEDs, input watts: 10.3, delivered lumens: 634, LM/W= 62, test no. LTL 23864P, tested in accordance with IESNA LM 79-08

6BPMW HL LED 80CRI, 3000 K LEDs, input watts: 15.2, delivered lumens: 950, LM/W=63 , test no. LTL23864, tested in accordance with IESNA LM 79-80

6BPMW HL LED 90CRI, 3000 K LEDs, input watts: 16.6, delivered lumens: 910, LM/W= 55, test no. LTL 23864P1, tested in accordance with IESNA LM 79-08

0° 20°

40°

60°

80°

200

400

Ave Lumens05152535455565758590

57857252544435520485502450

541472042201578049266

Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°

90° - 180°0° - 180°

405.5625.2862.2943.90.0

943.9

43.066.291.4100.00.0

*100.0*Efficiency

%02fppc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910

119107978779726661575249

119104918172655954494542

119101877667595348444037

116105958678716660565248

116102908071645853494542

11699867566595348444037

111101928376696459555147

11199877870635752484441

11196847465585348444037

RC

R

50% beam -56.0°

10% beam -93.1°

MountingHeight

Inital FCCenterBeam Diameter FC Diameter FC

8.010.012.014.016.0

19.110.36.44.43.2

5.88.010.112.214.4

9.65.13.22.21.6

11.615.820.124.328.5

1.91.00.60.40.3

0° 20°

40°

60°

80°

200

Ave Lumens05152535455565758590

38938435329923913757331640

36991371481065433174

Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°

90° - 180°0° - 180°

272.6420.3579.6634.50.0

634.5

43.066.291.4100.00.0

*100.0*Efficiency

%02fppc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910

119107978779726661575249

119104918172655954494542

119101877667595348444037

116105958678716660565248

116102908071645853494542

11699867566595348444037

111101928376696459555147

11199877870635752484441

11196847465585348444037

RC

R

50% beam -56.0°

10% beam -93.1°

MountingHeight

Inital FCCenterBeam Diameter FC Diameter FC

8.010.012.014.016.0

12.86.94.32.92.1

5.88.010.112.214.4

6.43.52.21.51.1

11.615.820.124.328.5

1.30.70.40.30.2

0° 20°

40°

60°

80°

200

400

Ave Lumens05152535455565758590

55755150642834319682482350

521421972121517748256

Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°

90° - 180°0° - 180°

390.9602.6831.1909.80.0

909.8

43.066.291.4100.00.0

*100.0*Efficiency

%02fppc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910

119107978779726661575249

119104918172655954494542

119101877667595348444037

116105958678716660565248

116102908071645853494542

11699867566595348444037

111101928376696459555147

11199877870635752484441

11196847465585348444037

RC

R

50% beam -56.0°

10% beam -93.1°

MountingHeight

Inital FCCenterBeam Diameter FC Diameter FC

8.010.012.014.016.0

18.49.96.24.23.1

5.88.010.112.214.4

9.25.03.12.11.5

11.615.820.124.328.5

1.81.00.60.40.3

0° 20°

40°

60°

80°

200

400

Ave Lumens05152535455565758590

43443038832526714963382050

411091501641155938216

Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°

90° - 180°0° - 180°

299.1463.5637.8702.60.0

702.6

42.666.090.8100.00.0

*100.0*Efficiency

%02fppc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910

119107978779726661565249

119104918172655953494542

119101867566595348444037

116105958678716560565248

116102908071645853494541

11699857566595348444037

111101918376696459545147

11198877870635752484441

11196847365585248434037

RC

R

50% beam -55.1°

10% beam -92.6°

MountingHeight

Inital FCCenterBeam Diameter FC Diameter FC

8.010.012.014.016.0

14.37.74.83.32.4

5.77.89.912.014.1

7.23.92.41.61.2

11.515.719.924.128.3

1.40.80.50.30.2

Page 4: FEATURES & SPECIFICATIONS · DOWNLIGHTING 6BP-6OP LED FEATURES & SPECIFICATIONS INTENDED USE — Our recessed LED module is the most economical means to create a well lit environ

6” LED Module

6BP-6OP LED

DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2013-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/28/17

LIGHTING FACTS