features: • electronic throttle trollmaster pro3...
TRANSCRIPT
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
Mfg #TM200DPROTM200DPRO2TM200DPRO3
TM201DPROTM201DPRO2TM201DPRO3
TM203DPROTM203DPRO2TM203DPRO3
TM206DPROTM206DPRO2TM206DPRO3
TM207DPROTM207DPRO2TM207DPRO3
TM208DPROTM208DPRO2TM208DPRO3
TM209DPROTM209DPRO2TM209DPRO3
TM210DPROTM210DPRO2TM210DPRO3
TM211DPROTM211DPRO2TM211DPRO3
TM212DPROTM212DPRO2TM212DPRO3
TM213DPROTM213DPRO2TM213DPRO3
TM214DPROTM214DPRO2TM214DPRO3
DescriptionHonda 8, 9.9 & 15 ('80-2000) PROHonda 8, 9.9 & 15 ('80-2000) PRO2Honda 8, 9.9 & 15 ('80-2000) PRO3
Merc Mariner ('90-'04) & Yamaha ('90-'06) 9.9 & 15 PROMerc Mariner ('90-'04) & Yamaha ('90-'06) 9.9 & 15 PRO2Merc Mariner ('90-'04) & Yamaha ('90-'06) 9.9 & 15 PRO3
Merc 5 & 6 (All Years) Nissan/Tohatsu 5 & 6 ('95-Present) PROMerc 5 & 6 (All Years) Nissan/Tohatsu 5 & 6 ('95-Present) PRO2Merc 5 & 6 (All Years) Nissan/Tohatsu 5 & 6 ('95-Present) PRO3
Yamaha 6, T8 (All Years) & 9.9 ('08-Present) PROYamaha 6, T8 (All Years) & 9.9 ('08-Present) PRO2Yamaha 6, T8 (All Years) & 9.9 ('08-Present) PRO3
Honda 8, 9.9, 15 & 20 ('01-'10) PROHonda 8, 9.9, 15 & 20 ('01-'10) PRO2Honda 8, 9.9, 15 & 20 ('01-'10) PRO3
John/Evin/Suzuki 9.9 & 15 ('03-Present) PROJohn/Evin/Suzuki 9.9 & 15 ('03-Present) PRO2John/Evin/Suzuki 9.9 & 15 ('03-Present) PRO3
Mercury 15 & 20 Tiller Only ('08-'09) PROMercury 15 & 20 Tiller Only ('08-'09) PRO2Mercury 15 & 20 Tiller Only ('08-'09) PRO3
Yamaha High Thrust/Large Power Head 9.9, 15 (2007) PROYamaha High Thrust/Large Power Head 9.9, 15 (2007) PRO2Yamaha High Thrust/Large Power Head 9.9, 15 (2007) PRO3
Niss/Tohatsu 8 & 9.8 (2003 Featherweights) PRONiss/Tohatsu 8 & 9.8 (2003 Featherweights) PRO2Niss/Tohatsu 8 & 9.8 (2003 Featherweights) PRO3
Mercury 8 & 9.9 Remote Shift/Throttle ('05-'10) PROMercury 8 & 9.9 Remote Shift/Throttle ('05-'10) PRO2Mercury 8 & 9.9 Remote Shift/Throttle ('05-'10) PRO3
Mercury 8 & 9.9 Tiller ('05-'10) PRO Mercury 8 & 9.9 Tiller ('05-'10) PRO2Mercury 8 & 9.9 Tiller ('05-'10) PRO3
Mercury 15 & 20 Remote & Tiller ('11-Present) PROMercury 15 & 20 Remote & Tiller ('11-Present) PRO2Mercury 15 & 20 Remote & Tiller ('11-Present) PRO3
Order No.NET
571705717157172
571735717457175
571765717757178
571605716157162
571795718057181
571825718357184
571855718657187
571885718957190
571915719257193
571645716557166
571675716857169
571945719557196
Retail$239.99 279.99 389.99
$239.99 279.99 389.99
$239.99 279.99 389.99
$239.99 279.99 389.99
$239.99 279.99 389.99
$239.99 279.99 389.99
$239.99 279.99 389.99
$239.99 279.99 389.99
$239.99 279.99 389.99
$239.99 279.99 389.99
$239.99 279.99 389.99
$239.99 279.99 389.99
FEATURES: • Electronic throttle control • precision throttle control • Momentary full throttle burst control • 25' cable • Water resistant control • Easy installation • Works with all Panther electro steer units
TrollMaster Pro Control boat speed with a dial that aids in recreating exact speeds with the idle function.
TrollMaster Pro2: Adds 10 times the micro speed control adjustments. Allows for momentary bursts of full throttle speed for adjusting your heading.
TrollMaster Pro3: Adds steering ability to the kicker with the same remoted when interfaced with a Pan-ther elector steer unit.
260N
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
DescriptionChrysler 3.5 - 140 hp outboardsForce 4 - 150 hp outboards and L-drives
Evinrude/Johnson 1.5 - 125 hpEvinrude/Johnson Electric - 40 hpEvinrude/Johnson 50 - 235 hpEvinrude/Johnson 2 - 300 hpEvinrude/Johnson 2-70 hpEvinrude Johnson 85-300 hpEvinrude/Johnson 5-70 hp 4-Stroke
Honda 2-130hp
Mercury 75-225 hp 4-strokeMercury 3.9 - 135 hpMercury Electric - 40 hpMercury 45 - 225 hpMercury 3 - 275 hpMercury 2.5-60 hpMercury 75-275 hpMercury 4-90 hp four stroke O/BMerc/Mariner 2.5-60 hpMerc/Mariner 75-250 hp
Mariner 2.5 - 275 hpMariner Electric - 200 hp
Mercruiser stern drivesMercruiser Alpha/Bravo stern drivesMercruiser Alpha 1, Bravo 1, Bravo 2, Bravo 3Mercruiser Alpha 1, Bravo 1, Bravo 2, Bravo 3
OMC stern drivesOMC Cobra stern drivesOMC Cobra stern drives
Suzuki 2-stroke O/B 2-65 hpSuzuki 2-Stroke O/B 75-225 hpSuzuki 2 - 140 hpSuzuki 2 - 225 hpSuzuki 4-Stroke O/B 9.9-70 hp
Volvo Stern DrivesVolvo 4, 6 & 8 cyl SP, DP, Sx, DPx stern drivesVolvo Stern Drives
Yamaha 2 - 225 hpYamaha 2 - 250 hpYamaha 2 - 250 hpYamaha 2-90 hp 2-strokeYamaha 9.9-100 hp 4-strokeYamaha 115-250 hp 2-strokeYamaha 75-225 hp 4-stroke
Mfg #B750B751-4
B734B732B736B733B735-2B737-2B753
B757-2
B712B719B721B726B722B723B724B710B725B727
B715B714
B740B742B744B745-2
B730B738B739
B778B779B780B781B782
B770B771-2B775
B783B784B785B786B788B789B791
Years'66-'84'84-'99
'56-'72'73-'90'73-'90'91-'94'95-'03'95-'02'94-'01
'76-'05
'01-'03'64-'71'72-'89'72-'89'90-'93'94-'97'94-'97'95-'00'98-'02'98-'02
'90-'93'76-'89
'64-'87'86-'92'95-'97'98-'04
'64-'86'86-'93'94-'99
'92-'99'92-'99'77-'84'85-'91'97-'00
'68-'93'94-'00'01-'04
'84-'89'90-'95'96-'98'99-'02'85-'99'99-'02'00-'03
Order No.15024T
15025T
15016T
15015T
15018T
15014T
15013T
15017T
15005T
15045T
14993T
15004T
15006T
15009T
15007T
15008T
15010T
15011T
14990T
14992T
15003T
15002T
15021T
15022T
15023T
15020T
15012T
15019T
15048T
15028T
15029T
15027T
15035T
15030T
15033T
15034T
15032T
15037T
15038T
15039T
15041T
15040T
15042T
15043T
Retail$29.9929.99
$29.9929.9929.9929.9929.9929.9929.99
$29.99
$29.9929.9929.9929.9929.9929.9929.9929.9929.9929.99
$29.9929.99
$29.9929.9929.9929.99
$29.9929.9929.99
$29.9929.9929.9929.9929.99
$29.9929.9929.99
$29.9929.9929.9929.9929.9929.9929.99
Clymer marine manuals offer comprehensive, detailed service information for outboard motors and stern drive units with the most up to date cover-age in the indus-try. The step by step text in these books is geared to do-it-yourself owners as well as expert mechanics. Every conceivable part, assembly is covered in detail and is illustrated with hundreds of photos, drawings and tables.
261T
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
Mfg #W801W809-3
BWD-1MMIC-3
DescriptionKawasaki Jet Ski Sea Doo Watercraft
O/B & I/O Wiring DiagramsMotor & Boat ID reference guide
Years'76-'91'88-'96
'56-'89'21-'96
Order No.15060T
15070T
15077T
15079T
Retail$29.9929.99
$24.9924.99
Slows even the big motors down to that "ever so slow" fish tantalizing speed. Large Troller: I/O's & Outboards Over 50 HP Small Troller: Outboards Up to 50 HP Lil' Fella: Outboards Up to 25 HP
Order No.28220THF
28224THF
28227THF
28230THF
DescriptionLarge TrollerSmall TrollerLil' Fella
Spring repair kit
Mfg #460461462
468
262V
Clymer Repair ManualsComplete and comprehensive service information.
Mfg #016.1016.2
DescriptionStandard ModelModel w/Fins
Order No.29307THF
29308THF
Easy Troller Trolling Plate• The Easy Trollers hinge design prevents damage to the trolling plate under inadvertent acceleration.• Fits O/B and I/O motors from 50 hp and up• Made in the USA From marine grade anodized alumi-num and stainless steel.
Fig. 016.1
Fig. 016.2
Retail$139.99
139.9979.99
$12.99
Retail$136.95182.95
Mfg #T16401NA
DescriptionTroll-A-MaticReplacement spring
Order No.57500T
57502T
Retail$109.99
9.99
Troll-A-Matic – 50 hp & UpInexpensive, Lightweight, Easy to install. The Troll-A-Matic is constructed of tough fiberglass filled nylon to eliminate corrosion and rust. This revolutionary trolling device is completely automatic and swings up as speed is increased.
Mfg #ABOS12V1ABOS11V2ABOS121C
DescriptionABOS Marine Blue Book Volume 1 - 10 yearsABOS Marine Blue Book Volume 2 - 19 yearsABOS Marine Blue Book CD-ROM - 30 years
Order No.00353T
00351T
00352T
Retail$179.99104.99239.99
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
263V
"Smart Tabs" - The simple solution • Fully Automatic Operation • Simple installation - no through hull drilling • No Hydraulics or electric switches • It reduces the "get on plane" speed by 30% or more • Provides a level, more comfortable ride at lower speeds
As the boat speed increases, the water pressure also increases. Once the water pressure ex-ceeds the actuator load rating the trim plates begin to move upward until they are horizontal with the bottom of the boat.
Mfg #ST780-20ST980-30ST1290-60ST1290-80
Description7"x8" plates/20# Actuators9"x8" plates/30# Actuators12"x9" plates/60# Actuators12"x9" plates/80# Actuators
Boat10'-12'13'-15'16'-18'18'-22'
Order No.44400444024440644408
Retail$139.99179.99239.99239.99
"Smart Tabs" SXIncorporates all the features of original Smart Tabs! Also provides durabil-ity with the no maintenance thermo molded co-polymer composite design. Tracking Ribs have been added to improve handling at higher speeds.
Mfg #SX9510-40-BLSX9510-60-BLSX9510-80-BL
Description9.5"x10" plates/40# actuators9.5"x10" plates/60# actuators9.5"x10" plates/80# actuators
Boat14'-17'16'-18'18'-22'
Order No.444104441144412
Retail$155.99155.99155.99
Mfg #G816
Order No.25220
Hydrofoil GTA precision engineered and de-signed stabilizer with a unique patented design. Packaged on an attractive, compact display card.
Retail$39.99
Mfg #SR-XPI-1SR-XPI-2SR-XPI-3
JR-XPI-1JR-XPI-2
TE-XPI-1TE-XPI-2
DescriptionBlack Standard 25-365 hpWhite Standard 25-365 hpGrey Standard 25-365 hp
Black Junior up to 25 hpWhite Junior up to 25 hp
Black Torque EqualizerWhite Torque Equalizer
Retail$59.9559.9559.95
$49.9549.95
$15.9515.95
• On Plane Quicker • Reduces Bow Rise• Eliminates Chine Walking • Stops Porpoising• Wipes out Cavitation • Saves Fuel• True Stabilization • Aids in Pulling Skiers
Plus... • NO DRILL Mounting • Sleeker Profile • Captive Prop-Wash Resulting in Improved Thrust • Fastest Hole Shot!
XRIII
Order No.36710T
36711T
36712T
36708T
36709T
36713T
36714T
Mfg #SR-XRIII-1SR-XRIII-2SR-XRIII-3
DescriptionBlackWhiteGrey
Retail$149.95149.95149.95
Order No.36725T
36726T
36728T
Mfg #JR-XRIII-1
DescriptionBlack
Retail$129.95
Order No.36730T
XP
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
Performance:Increase Speed - Reduce pounding - Correct listing - Eliminate porpoising - Off set prop torque - Comple-ment engines power trimEfficiency:Reduce fuel consumption - Reduce engine laboring - Eliminate squatting Maximum efficiency is obtained by using the longest span planes possible. The planes are secured
to the trailing edge of the bottom. Measure the hull from centerline to the chine , or turn of the bilge, and select the longest span planes that can be used (allowing 3"-4" of leeway).
Trim plane sets DO NOT come with a control you MUST order a control when you order your trim tabs.
Span - Inboard to outboard measurementChord - For to aft measurement
Mfg #ES2000
Euro Style Rocker SwitchWaterproof rocker switch.
264V
AutoTab ControlThe Bennet Auto Tab Control monitors and maintains your boat's attitude, automatically correcting out of trim conditions.
Tab Postion IndicatorAttractive, Compact and easy to install. The TPI will work with any Bennett trim tab system on the market. It is ac-curate, waterproof and features adjust-able intensity LED's for day or night.
Order No.08165T
Retail$96.00
Mfg #TPI-2000
Order No.08170T
Retail$285.00
Mfg #AC-3000
Order No.08178T
Retail$420.00
Chord9"9"9"9"
Span12"18"24"30"
Hull Length15'-24'18'-24'20'-26'25'-30'
Order No.08151T
08153T
08155T
08157T
Retail$650.00705.00735.00770.00
Mfg #V351HPUA1101AVP1135GVP1135RT1125-20
DescriptionHydraulic power unitActuator assemblyGreen wire solenoidRed wire solenoid20' Hydraulic hose tubing
Order No.08171T
08169T
08175T
08174T
08179T
Retail$378.00105.0060.0060.0039.00
Replacement Parts
Hydra Powered Assisted Outboard Motor Bracket• Effortless operation - raises and lowers motors in less than 30 seconds• 12 volt contained marinized hydraulic actuator• Designed to fit 4-stroke motors, wide stance for stability• Heavy duty 1/2" thick structural aluminum extrusion• 13-1/4" vertical travel• Poly mounting board
Bracket includes: 1/2"-20 x 4-1/2" Stainless mounting hardware.2000lb motor safety cable
**TRIM TABS are Special Order**
**Special Order**
Mfg #7109571096
Max. HP25hp40hp
Max. Weight148lbs248lbs
Order No.23619TW
23620TW
Retail$2075.002175.00
**Special Order**
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
265N
Mfg #SP655SP663SP667
ApplicationMercury/Mercruiser Alpha One 1973-upEvin/Johnson 88hp special 1988-2002Evin/Johnson 200HP High Output '03-'07
Retail$69.9569.9569.95
Order No.39533T
39535T
39537T
Skeg ProtectorMade from anti-corrosive, 18 gauge 304 SS, SkegPro protects against harsh marine environments. Its mirror-polished finish creates a custom look and lasting protection.• Protects against ramp dragging, rocks, debris and submerged objects• Installs easily in less than 10 minutes• A model to fit virtually any skeg
Introducing - Panther's new line of products for ultimate skeg protection:Safe - SkegWhether you are looking to protect your new skeg, repair your damaged one or even just add some shine. 316 marine grade stainless steel Safe-Skeg is brilliantly polished and ready to install!Kit includes: Mounting hardware and instructions.
Mfg #35-SS60035-SS60535-SS61035-SS61535-SS62035-SS625
35-SS63035-SS63535-SS64035-SS64535-SS65035-SS655
35-SS66035-SS66535-SS67035-SS67535-SS68035-SS685
35-SS69035-SS69535-SS70035-SS70535-SS71035-SSKIT1
DescriptionMercruiser Pre Alpha OneMercruiser Alpha One '89Mercruiser Alpha One Gen IIMercruiser Bravo IIIMercury 150 '88, Mercury 135 '87Honda 90, Mercury 75
Evinrude/Johnson 150, 175 ('86 thru '03)Evinrude/Johnson 90, 100, 115, 120, 140Evinrude/Johnson 60, 70Yamaha 150 '09Honda 35, 40, 45/Suzuki 40, 50, 60Volvo SX ('06-'09)/Volvo DP ('96-'07)
Mercury 200 OptimaxVolvo SX ('95-'06)Evinrude/Johnson 150, 175, ('04-'10)Evinrude/Johnson 75, 90 E-TecSuzuki 90, 115, 140/Evinrude/Johnson 60, 70, 90Honda 135, 150, 200, 225
Yamaha 155, 130 ('03-'09)Yamaha 200Yamaha 60, 70, 80, 90, 100 ('02-'09)Yamaha 40, 50 ('01-'09)Evinrude/Johnson 40, 50 by SuzukiSafe-Skeg hardware kit
Retail$129.00129.00129.00129.00129.00129.00
$129.00129.00129.00129.00129.00129.00
$129.00129.00129.00129.00129.00129.00
$129.00129.00129.00129.00129.00
34.99
Order No. NET
263502635126352263532635426355
263562635726358263592636026361
263622636326364263652636626367
263682636926370263712637226373
**For a Full List of Applications please call or visit www.keelguard.com/modelguide
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
Stationary Motor BracketA permanent fixed height mount for auxilary or trolling motors. Tough 304 stainless steel brack-ets, 1-1/2" thick POLY mount-ing board 8" wide. For motors up to 15 hp.
Platform Motor BracketA fixed height mount for an auxi-lary or trolling motor. Designed to be mounted on a transom platform. Tough 304 stainless steel brackets 1-1/2" thick POLY mounting board. For motors up to 15 hp.
Mfg #G71078
Mfg #G71074
266V
Retail$102.50
Retail$84.50
Order No.23632T
Order No.23630T
"Easy Pump" Outboard Motor BracketPlain and simple The Best Manual Outboard Motor Bracket Available!• 14" Height Adjustment• 7-1/2 to 25hp motors• Max weight 175 lbsSimple pump to raise bracket!
Mfg #71092Order No. 23618TW $1450.00
Mfg #55-0024Order No. 26393NET $99.99
Fixed Outboard Motor Bracket SSVertical, fixed mount outboard motor bracket. Motors up to 12 HP or 85 lbs. Stainless Steel with heavy duty poly mounting board. Each bracket is 8.5"x 6.125". All hardware included.
Lightweight 4-Stroke Motor Bracket• 2 & 4-stroke motors up to 15hp or 132lbs• Hard coat anodized aluminum• Adjusts with the turn of a knob• SS torsion springs• 10" of travel• 5 vertical running positions
Mfg #55-0407ALOrder No. 26394NET $279.99
Lightweight 4-Stroke Motor Bracket• Stainless Steel construction• 4-stroke motors up to 15hp or 132lbs• 2-stroke motors up to 20hp or 132lbs• Twist knob safety locks• Heavy duty SS torsion springs• 2" polypropylene mounting board• 10" of travel• 4 position lock bar• Rated for long or short shaft engines
Mfg #55-0408SSOrder No. 26395NET $332.95
Mfg #55-0416Order No. 26397NET $459.99
4-Stroke Auxiliary Motor Brackets• Anodized aluminum bracket• Handles up to 35hp• Adjusts with the turn of a knob• SS torsion springs• 2" polypropylene mounting board• 16" of travel• 4 position lock bar• Rated for long or short shaft engines
Mfg #55-0410Order No. 26396NET $329.99
4-Stroke Auxiliary Motor Brackets• Anodized aluminum bracket• Handles up to 35hp• Adjusts with the turn of a knob• SS torsion springs• 2" polypropylene mounting board• 10" of travel• 5 vertical running positions• Rated for long or short shaft engines
**Special Order**
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
Auxilary/Trolling Motor Brackets• Retractable Bracket for trolling motors on power and sail boats• Transom mount locks and holds motor up or swings down for propulsion• Tough alloy anodized aluminum, w/stainless steel springs and bolts• Fits all style motors (extra wide 11-1/2" black poly mounting board)• 4-position locking height adjustment• Stainless steel mounting hardware and instructions included• 2" thick x 11-1/2" wide mounting pad. (except G71044 16" wide)
Stainless Steel Auxilary Motor Bracket• Easier to lift and lower - Stainless springs help counter balance motor weight• Transom mount locks and holds motor up or swings down for propulsion• Built in transom angle adjustment allows optimum motor performance • Fits all motor styles (11-1/2" wide black poly mounting board)• 4-position locking height adjustment• Wide track body for added stability• Made of tough 304 Stainless steel• 2" thick x 11-1/2" wide mounting board
Mfg #G71037G71039G71056
H.P. Ratingto 8 hp7-1/2 to 12 hp7-1/2 to 20 hp
Weight Cap.59 lbs82 lbs115 lbs
Travel8-1/2"14-1/4"11-1/4"
Order No.23587THF
23589T
23613T
Retail$224.95262.50221.50
Mfg #G71053
DescriptionAdapter plate
Order No.23612T
Outboard Motor Bracket Adapter PlateEnables the boater to remove his bracket from the transom quickly. Fits models G71040, G71041, G71042.
Mfg #G71090G71091
Description7-1/2 to 30 hp7-1/2 to 25 hp
Order No.23635T
23636T
Outboard Motor Brackets Built especially for new 4-stroke, heavier, high torque motors.11-1/2" wide mounting board. Rated up to 175 lbs.
Mfg #G99057
Order No.23757
2" Thick Poly (11-1/2" x 10-3/4")
Replacement Boards
267V
Travel9-1/2"15-1/2"
Retail$61.95
Retail$315.50449.95
Retail$72.50
Mfg #G71040G71042G71057
H.P. Rating8 hp7-1/2 to 12 hp7-1/2 to 20 hp
Weight Cap.59 lbs82 lbs115 lbs
Travel8-1/2"14-1/4"11-1/4"
Order No.23590T
23598T
23615T
Retail$165.95179.95172.50
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
268V
Mfg #TE-217
DescriptionTransom Elevator
Order No.57788
Mfg #MJ-1
DescriptionMini Jacker
Order No.57330
Transom ElevatorFor boats with transoms to 1-3/4" thick. Constructed of aluminum. Allows long shaft motor to be used on short shaft boats. Rated to 40 hp. For Clamp-on or bolt on motors.
Mini JackerThis cast aluminum offset jack plate is designed to handle clamp-on motors up to 35 hp. The minijack-er has a 4" stand-off. Mounting surface is 11-1/2" wide x 10" high.
15"
5-1/4"
Retail$239.99
Retail$139.99
Fixed Motor BracketHD Aluminum bracket is designed to hold 2 or 4 stroke engines weighing up to 150 lbs.
• 5" Height adjustment• 8-1/2" Setback
Auxilary Motor MountThis bracket makes mounting an auxilary or long shaft motor a snap! It provides 5" of lift to any motor to 40hp or 150lbs.
Auxiliary Motor Bracket• Up to 40hp four stroke motors• Up to 15.5" vertical lift• Fabricated aluminum plate• Powder coat painted• Stainless steel hardware• Electro/hydraulic
Mfg #55-0045Order No. 56903 N $1249.99
Panther 435Fixed Auxilary Motor Bracket• Handles motors to 35 hp• Adjust 7" or 13"• Fixed Trim
Mfg #55-0435Order No. 56911 TW $399.99
Weekender SeriesTrim/TiltThis unit is designed for the weekend fisherman to use on 2 or 4 stroke engines to 150lbs.8" Setback
Mfg #55-0040Order No. 56909 TW $575.99
Universal Lift GaugeThis unit is truly universal and will fit any jack plate or trim and tilt unit. The 2-1/8" gauge matches most factory installation gauges. Kit contains gauge, sending unit, all wiring and directions.
Mfg #55-1100
DescriptionGauge kit
Order No.56921 TW
Retail$224.99
Mfg #55-0027Order No. 57104 N $219.95
Mfg #55-0405Order No. 56907 TW $159.99
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
Panther 35 Remote Auxilary Motor Lift! Raise and lower your auxilary motor at the touch of a button. Handles motors to 35 hp including 4-stroke motors.• 5 degree tuck under & 30-60 degree adjust tilt range• Electro mechanical operation• 7" or 12" transom set back (adjustable)• Optional 2" Aluminum Shim Kit available
Retail$625.00649.00
$60.9964.999.99
7" Set Back
12" Set-Back
269V
Mfg #55-003555-0350
99-5502255-906099-55098
DescriptionTilt AssemblyTilt assembly - fits Ranger boats
Replacement Relay Kit6-1/2" Bolt KitPlastic Mounting Board
Order No.56908N
57101N
56914TW
66539TW
56916TF
PT 130 Power Trim & Tilt• Rated to 130 HP • For clamp-on or bolt-on motors • 20° of trim/90° of total tilt • 7800 lbs of thrust• 6" Set-Back • Standard BIA bolt hole pattern
Mfg #C13002C13001C13022C13032
DescriptionTrim/Tilt without gaugeTrim/Tilt with gaugeTransom clamp adapterSpacer kit for pontoons
Order No.10101TW
10102TW
10105TW
10107TW
PT-35 Power Trim and Tilt• Accomodates 35 HP and below motors • Accomodates clamp or bolt on motors• 5-1/2" setback • Weighs only 24 lbs• Motor width must not exceed 10" • 84° total trim and tilt
Mfg #52100
DescriptionTrim/Tilt without gauge
Order No.10100TW
Retail$734.99864.9980.9950.99
Retail$619.99
Raise and lower your motor with push button convenience! Add trim and tilt to any motor. Rugged reliable design. Easy to operate.• 5 degrees of tuck under & 60 degrees total tilt• Electro mechanical operation• 7" Transom set back• Optional Universal Trim Gauge
Mfg #55-005555-0135
Descriptionmotors to 55 hpmotors to 135 hp
Order No.56910N
56912N
Retail$599.00689.00
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
270V
HydraulicHydro LiftThe Professional SeriesState of the art heavy duty hydraulic jack system delivers precise control with no effort! Getting your boat on plane has never been faster! It lifts your outboard in 8-10 seconds at full throttle.• Rated to 300 hp• 6" Set Back• 6" Vertical Lift
Mfg #OGT 600 w/Lever ControlOrder No. 57154N Retail $1014.00
Mfg #OEZ 600 w/EX-Zact ControlOrder No. 57156N Retail $1170.00
EX-Zact Control Dial
Lever Control Manual Hydro LiftThe Performer SeriesFinally! A manual jack plate that can be adjusted from inside the boat with only one screw! No side hardware to loosen! Just turn the adjustment screw to the desired height, tighten the locking nut and you are ready to go.• Rated to 300 hp• 6" set back• 3.5" Vertical Lift
Mfg #600M Hydro LiftOrder No. 57150N Retail $421.00
Mfg #Wrench-1 Bent WrenchOrder No. 57152N Retail $29.99
Integral Trim & TiltThis trim/tilt unit will work with all Johnson/Evinrude 20-35 hp motors 1978 & newer, 2-stroke only. Models with thru hub exhaust.Will Not Work with 4-Stroke Mo-tors
PL-65 Electric Hydraulic Transom Jacks• Rated to hold all V6 motors • 5" Of lift• 5-1/2" Set-Back • Standard BIA Bolt hole pattern
Mfg #C65002C65001
DescriptionPower jack plate with out gaugePower jack plate with gauge
Order No.10103TW
10104TW
Retail$924.991119.99
Mfg #55-0025
Order No.57102N
Retail $559.99
Manual Transom Jacks - 5" Lift/5-1/2" set-backThe motor bracket moves up and down on the transom bracket by use of rollers machined from aluminum-bronze alloy. The manual power lift is de-signed to fit any standard motor with-out drilling. To adjust manual lift simply loosen 4-clamp bolts turn the 1-1/8" nut at the bottom of the bracket to achieve the desired height.
Mfg #65012
Order No.10109TW
Retail$315.99
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
Mfg #55-0100Order No. 56906N $399.00
Mfg #55-0102Order No. 56904N $489.00
Steering Trim Control UnitThis steering trim control unit comes complete with coiled cord. The weatherproof rubber, push button, switches will provide trim control without removing your hands from the steering wheel.
Transom Trim SwitchThis transom trim switch provides a weatherproof tilt switch control system at the stern area of the boat to facilitate placing motor support in position with one person.
Mfg #TTC-1
Order No.57355
Retail$34.99
Mfg #ST-1
Order No.57346
Retail$79.99
Hot TrimFloor mounted trim switch. A must for all tiller operated motors. Keep your hands where they belong, on the con-trols. Will operate Trim/Tilt & Transom Jacks. Comes completely prewired with complete instructions.
Mfg #HT-1
Order No.57334
Retail$54.99
Trim Control Where It Belongs - At Your Finger TipsDual or single switch kits. Designed to work with all teleflex steering systems, will retrofit many others as well.
Accessory Trim Switch12' of cable allows easy and custom installation of this re-mote push button switch. This switch splices into existing applications or can be plugged into any Panther product.
Mfg #55-1200
Order No.56915TW
Retail$49.99
271V
The Brand New ..... T4Through the tilt tube steering!• 24' Cable allows you to steer your kicker from anywhere in your boat• Mounts to your kicker motor in minutes• Does not take up any space on your transom
• Quick response • Quick disconnect• Durable waterproof motor • Compact design• Black anodized finish
Model 0100Electro Steer For Kicker Motors
DescriptionSingle LeverDual Lever
Order No.6011660117
Mfg #PT1000PPT2000P
Retail$79.99146.99
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
DescriptionShort KitLong Kit
Order No.6653766535
Short Kit: 4 ea of 1/2-13 x 2-1/2" fully threaded cap bolt, 1/2-13 nylock nut waxed, 1/2 flat washer.
Long Kit: 4-ea 1/2-13 x 4" fully threaded cap bolt, 1/2-13 nylock nut waxed, 1/2 flat washer & 2-ea 1/2 fender washer
Stainless Steel Motor Mounting Hardware Kit
272V
Mfg #KT040KT030
Retail$13.4914.99
Transom WedgesThese transom wedges fit newer model OMC & mercury engines, bolt on engines with factory installed trim & tilt. Cast aluminum construction.
Motor TilterThe ideal leverage tool for use with motors with-out power tilt. Helps to tilt back safely without strain. Use with motors up to 40 hp.
Mfg #TW-2Order No. 57388 $44.99
6-1/2" Stainless SteelMotor Mounting Hardware Kit
Mfg # 55-9060Order No. 66539TW $64.99
Pro StrapThe Pro Strap provides hands-free, heavy duty retention for the model 35. As the engine is tilted, the strap tightens and secures the motor for extreme, rough water conditions. The Pro Strap fits any auxi-lary outboard with a Panther Model 35
Mfg #55-1500Order No. 56917TF $29.99
Safety Cable Prevents loss of small outboard engines. Clear vinyl coated heavy duty steel cable. 3/32" diameter x 50" long.
Mfg # 11664-3Order No. 09420 $14.89
Aluminum Transom PlateHolds small outboards on the tran-som securely. Prevents damage to the transom by the clamps. Drilled for mounting screws
Transom Pad• Protects transom• Rubber pad is oil and weather resistant• Reduces motor vibration noise
Mfg #099074-10Order No. 43459 $34.99
Trailering ClipsSimply place in extended trim rams to take shock off of the hydraulic system.
Mfg #18-909918-9098
DescriptionFor MercruiserFor OMC Cobra
Order No.89099N
89098N
Retail$27.4921.49
Mfg #G71036Order No. 23586T $73.50
Mfg #TP-32Order No. 57790 $39.99
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
273V
Outboard LockLock design features a free spinning collar that will turn if attacked by gripping tools without loosening the lock. Tough hardened stainless steel construction.
Outboard Motor LockLaminated pin tumbler lock recessed in case hardened vinyl clad steel tube. Brass Lock.
Outboard Motor LockMounts on most outboard motors. Coated with a long lasting black powder coat.
Transom Tuff'nerSave your transom from "biting" and cracking with the Transom Tuff'ner! Adds strength and longevity to your boats transom by evenly distributing forces during fast starts, high speeds & sharp turns. Aluminum construction.
Mfg #740377403874049
ApplicationYamaha 50 hp and upJohnson/Evinrude 40 hp and upUniversal Smaller outboards
Retail$36.9936.9936.99
Order No.35806THF
35808THF
35810THF
Threads12x1.251/2"-135/16"-18
Mfg #1780223 2" x 15"Order No. 55402THF $46.95
Outboard Motor Lock• Heavy carbon steel design• Fits turnbuckle mounted engines• Recessed solid brass lock• Noise dampeners reduce rattle
Mfg #75-8000Order No. 26398 $27.49
Outboard ExtensionHandleComplete steering and throttle control. Easy to Use, Durable, Flexible. Fits all outboards 15 hp and under. • Adjustable length 36" to 53".
Mfg #001
DescriptionHandle w/U-Joint
Order No.29301THF
Extension HandleExtension handle for all Minnkota motors and small outboards up to 30 hp. Lightweight and corrosion resistant, easy to attach and remove.
Mfg #18541001854101
Description30" Straight handle18" Straight handle
Order No.56872T
56873T
Retail$52.95
Retail$37.9926.79
Mfg #OML-0127Order No. 22750 $38.49
Mfg #430Order No. 37925THF $29.95
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
Universal Motor SupportMounts either to the trailer w/a removable bracket or over the roller. Fully adjustable 34" to 46".
Mfg #55-2100
Order No.57131
Adjustable Motor SupportPlated tubing, removable, adjusts 28" to 59".
Mfg #55-190055-195099-55805
DescriptionMotor supportOver roller brkt"V" block only
Order No.264002640126405
Retail$66.99
Retail$59.99
7.4912.99
274V
Transom SaverDeluxe adjustable head with composite pads. Aluminum tubing construction. Bolt-on mounting, 19"to 29" Adjustable length.
Lock'N StowUnlike traditional transom savers, Lock'N Stow does not "Tie" the outboard to the trailer. It's small size also makes it easy to store in your boat when not in use. Black Powder Coat Finish.
Mfg #10309A10108A10107P10106
ApplicationOMC 1989 & newer - 100 hp and upMercury engines 75 hp - 200 hp EFIMercury engines 200 Opti - 250 EFIReplacement busing
Order No.00752THF
00753THF
00754THF
00751
Retail$82.5988.7993.955.95
Mfg #400BOrder No. 00750 $47.79
Transom SaversEssential for protecting your boat's transom and stabilizing your engine while your rig is being trailered. Each unit is constructed of high tensile aluminum tubing with easy height adjustment. A design which assures a perfect fit on any engine. ** RB Model includes both mounts Over the Roller & Bolt On
MD Angled Adjustable Reach Transom Saver• Adjusts from 30"-60"•Unique angle adjustment from 0º to 36º with 12º increments• Locking feature prevents unintentional detachment•Fits any trailer• Heavy duty molded rubber pads prevent scratching on the lower unit• Steel construction with AquaArmor corrosion resistant black finish on the tubes
Mfg #4000-ADJ RB424-ADJSP-410
Description21" to 31" - Roller/Bolt on Mount - adj. head32" to 42" - Over the roller mount - adj. headReplacement Rubber Shocks 4/set
Order No.00757THF
0075500771
Retail$58.9966.959.59
Mfg #460-ADJOrder No. 00756THF $105.99
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
275V
Twist Lock Frame Mount Transom SaverTwist lock models provide a secure mounting to the trailer. All models are zinc plated and adjustable.
Mfg #TS-85TS-9090099006
Description23" - 37"26" - 56"Rubber V blockTrailer brkt
Order No.64622T
64625T
64621T
64628T
Mfg #TS-86TS-919009
Description23" - 37"26" - 56"Rubber V block
Order No.64614T
64616T
64621T
Mfg #TS-80TS-829009
Description21" - 30"30" - 53"Rubber V block
Order No.64618T
64620T
64621T
The "Straight Tube"Roller Mount Transom SaverAll models are zinc plated and adjustable.
Roller Mount Transom SaverAll models are adjustable and have a zinc plated finish.
The Straight TubeTwist Lock Mount Transom SaverAll models are zinc plated and fully adjustable.
Mfg #TS-81TS-8390099006
Description21" - 30"20" - 53"Rubber V blockTrailer brkt
Order No.64610T
64612T
64621T
64628T
Retail$55.9566.959.959.95
Retail$55.9565.959.95
Retail$42.9552.959.95
Retail$42.9553.509.959.95
A Unique New Device For Trailering - Designed for three ram trim units on Mercury, Yamaha, Suzuki and Honda motors. Easy to use, easy to stow when not in use! Simply put the M-YWedge on the ap-propriate trim ram and run the engine down putting pres-sure on the Rubber support taking all of the shock off of the trailer and transom.
Universal M-Y WedgeAll the benefits of the original M-Y Wedge and uses the main tilt rod on single ram trim units. The Universal M-Y Wedge pops into place over the main tilt rod.5" Length
Mfg #MW-5Order No. 43503TF $41.99
Mfg #MY-1Order No. 43500TF $41.99
NavigationLites
Steering/Controls
Hardware/Fasteners
Covers/Windshield
Pumps/Int. Lites
Electric/Battery
Minnkota
Gauges
Electronics/Radios
Fuel
Lube/Motor Care
Aux. Brkts/Tilt/Trim
Spark Plug/Starters
Props
Seats/Pedestals
Anchors/Rod Holder
Winches/Jacks
Lites/Tie Downs
Tires/Couplers
BoatCare
Misc./Flooring
Ski's/Tubes
Floatation
Ladders
Water Front
Fenders/Dock Lines
276V
Motor Carriers• For ease when storing or moving motors• Models for outboards and trolling motors from 1 to 115 hp and up to 315 lbs.• Strong aluminum tube frame • Black recycled plastic mounting board
Motor StandFor motors up to 50 hp or 180 lbs. Black recycled plastic mounting board.
Motor StandFor motors up to 15 hp or 85 lbs.Black recycled plastic mounting board.
Boat DollyHelps move and roll small fishing boats. Clamps securely to the transom.
G31400
G31600
G31800G31900
Mfg #71050
Order No.23606T
Retail$71.95
Mfg #30300
Order No.23115THF
Retail$76.50
Mfg #30400
Order No.23116THF
Retail$98.50
Recycled Plastic Mounting Boards!!
Mfg #31400316003180031900
DescriptionMotor carrier 1-15 hp or up to 85 lbsMotor carrier 1-30 hp or up to 130 lbsMotor carrier 30-80 hp or up to 265 lbsMotor carrier 30-115 hp or up to 315 lbs
Order No.23117THF
23127THF
23128T
23129T
Retail$76.50101.50250.95278.95