fcc doc test report - laird techcdn.lairdtech.com/home/brandworld/files/testrpt-fcc_15b...test...

Report No.: FD941208L11 1 Report Format Version 2.0.5

FCC DoC TEST REPORT

REPORT NO.: FD941208L11MODEL NO.: SDC-CF10GRECEIVED: Dec. 05, 2005

TESTED: Dec. 05, 2005 ~ Apr. 06, 2006ISSUED: Apr. 06, 2006

APPLICANT: Summit Data Communications, Inc.

ADDRESS: 526 South Main Street Suite 411,Akron, Ohio, 44311 United States

ISSUED BY: Advance Data Technology Corporation

LAB ADDRESS: 47 14th Lin, Chiapau Tsun, Linko, Taipei,Taiwan, R.O.C.

TEST LOCATION: No. 19, Hwa Ya 2nd Rd., Kueishan, Taoyuan,Taiwan, R.O.C.

This test report consists of 37 pages in total. It may be duplicated completely for legal use with

the approval of the applicant. It should not be reproduced except in full, without the written

approval of our laboratory. The client should not use it to claim product endorsement by CNLA,

A2LA or any government agencies. The test results in the report only apply to the tested

sample.

No. 2177-01


Table of Contents1 CERTIFICATION..............................................................................................................32 SUMMARY OF TEST RESULTS......................................................................................42.1 MEASUREMENT UNCERTAINTY..............................................................................43 GENERAL INFORMATION ..............................................................................................53.1 GENERAL DESCRIPTION OF EUT ...........................................................................53.2 DESCRIPTION OF TEST MODES .............................................................................63.2.1 CONFIGURATION OF SYSTEM UNDER TEST............................................................63.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................................73.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.............................................83.4 DESCRIPTION OF SUPPORT UNITS .......................................................................84 TEST TYPES AND RESULTS..........................................................................................94.1 CONDUCTED EMISSION MEASUREMENT..............................................................94.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT............................................94.1.2 TEST INSTRUMENTS................................................................................................94.1.3 TEST PROCEDURES ..............................................................................................104.1.4 DEVIATION FROM TEST STANDARD.....................................................................104.1.5 TEST SETUP ...........................................................................................................114.1.6 EUT OPERATING CONDITIONS .............................................................................114.1.7 TEST RESULTS .......................................................................................................124.2 RADIATED EMISSION MEASUREMENT.................................................................184.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...............................................184.2.2 TEST INSTRUMENTS..............................................................................................194.2.3 TEST PROCEDURES ..............................................................................................204.2.4 DEVIATION FROM TEST STANDARD.....................................................................204.2.5 TEST SETUP ...........................................................................................................214.2.6 EUT OPERATING CONDITIONS .............................................................................214.2.7 TEST RESULTS .......................................................................................................225 PHOTOGRAPHS OF THE TEST CONFIGURATION.....................................................306 INFORMATION ON THE TESTING LABORATORIES ...................................................36

APPENDIX-A........................................................................................................................ A-1


1 CERTIFICATION

PRODUCT : SDC-CF10G 802.11g Compact Flash Modulewith Antenna Connectors

MODEL NO.: SDC-CF10GBRAND: Summit

APPLICANT : Summit Data Communications, Inc.TESTED: Dec. 05, 2005 ~ Mar. 31, 2006

TEST SAMPLE: ENGINEERING SAMPLESTANDARDS : FCC Part 15, Subpart B, Class B.

ANSI C63.4-2003

The above equipment have been tested by Advance Data TechnologyCorporation, and found compliance with the requirement of the above standards.

The test record, data evaluation & Equipment Under Test (EUT) configurations

represented herein are true and accurate accounts of the measurements of the

sample’s EMC characteristics under the conditions specified in this report.

PREPARED BY : , DATE: Apr. 06, 2006Jessie Wang

TECHNICALACCEPTANCE : , DATE: Apr. 06, 2006Responsible for RF Long Chen

APPROVED BY : , DATE: Apr. 06, 2006Gray Chang / Supervisor


2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications:

STANDARD SECTION TEST TYPE RESULT REMARKS

ConductedEmission PASS

Meet the requirement of limit.Minimum passing margin is–18.24dB at 0.158MHz.

FCC Part 15, Subpart B,Class B

RadiatedEmissions PASS

Meet the requirement of limitMinimum passing margin is–1.18dB at 123.31MHz.

2.1 MEASUREMENT UNCERTAINTY

Where relevant, the following measurement uncertainty levels have beenestimated for tests performed on the EUT as specified in CISPR 16-4:

MEASUREMENT FREQUENCY UNCERTAINTYConducted emissions 9kHz~30MHz 2.44 dB

30MHz ~ 200MHz 3.55 dB200MHz ~1000MHz 3.58 dB

1GHz ~ 18GHz 1.10 dBRadiated emissions

18GHz ~ 40GHz 0.91 dB

This uncertainty represents an expanded uncertainty expressed at approximatelythe 95% confidence level using a coverage factor of k=2.


3 GENERAL INFORMATION3.1 GENERAL DESCRIPTION OF EUT

PRODUCTSDC-CF10G 802.11g Compact Flash Modulewith Antenna Connectors

MODEL NO. SDC-CF10G

POWER SUPPLY 3.3Vdc from host equipment

MODULATION TYPECCK, DQPSK, DBPSK for DSSS64QAM, 16QAM, QPSK, BPSK for OFDM

MODULATION TECHNOLOGY DSSS, OFDM

TRANSFER RATE802.11b: 11/5.5/2/1Mbps802.11g: 54/48/36/24/18/12/9/6Mbps

FREQUENCY RANGE 2400MHz ~ 2483.5MHz

NUMBER OF CHANNEL 11

MAXIMUM OUTPUT POWER 64.269mW

ANTENNA TYPE Refer to Note 1 as belowDATA CABLE NA

I/O PORTS NA

NOTE:1. There are 3 antennas provided to this EUT. The information about those antennas as below

table:

ANTENNA NO. TYPE GAIN TYPE OF ANTENNACONNECTOR

1 Dipole 2.2dBi UFL2 Dipole 2.2dBi UFL3 Printed 0dBi UFL

Remark: After pretest for each type of antenna and chosen the Antenna 2 & 3 for final test andrecorded.

2. The EUT, operates in the 2.4GHz frequency range, lets you connect IEEE 802.11g or IEEE802.11b devices to the network. With its high-speed data transmissions of up to 54Mbps.

3. The platform: (1) Mobile Data Terminals (MDTs), (2) Vehicle Mounted Devices(VMDs)

4. The above EUT information was declared by manufacturer and for more detailed featuresdescription, please refer to the manufacturer's specifications or User's Manual.


3.2 DESCRIPTION OF TEST MODES

Eleven channels are provided to this EUT for normal mode.Channel Frequency Channel Frequency

1 2412 MHz 7 2442 MHz2 2417 MHz 8 2447 MHz3 2422 MHz 9 2452 MHz4 2427 MHz 10 2457 MHz5 2432 MHz 11 2462 MHz6 2437 MHz

3.2.1 CONFIGURATION OF SYSTEM UNDER TEST

Test table

Notebook

EUT (Power from host equipment)

Extended Card

Antenna


3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL

Applicable toEUTconfigure

mode PLC RE<1G RE≥1GDescription

A √ √ √ Dipole antenna with 2.2dBi gain

B - √ √ Printed antenna with 0dBi gain

Where PLC: Power Line Conducted Emission RE<1G RE: Radiated Emission below 1GHzRE≥1G: Radiated Emission above 1GHz

Note: “-“: Means no effect.

Power Line Conducted Emission Test:

Pre-Scan has been conducted to determine the worst-case mode from all possiblecombinations between available modulations, data rates and antenna ports (if EUT withantenna diversity architecture).Following channel(s) was (were) selected for the final test as listed below.

EUTconfigure

modeMode Available

ChannelTested

ChannelModulationTechnology

ModulationType

Data Rate(Mbps)

A 802.11g 1 to 11 1, 6, 11 OFDM BPSK 6

Radiated Emission Test (Below 1 GHz):

Pre-Scan has been conducted to determine the worst-case mode from all possiblecombinations between available modulations, data rates of the antenna and antenna ports (ifEUT with antenna diversity architecture).Following channel(s) was (were) selected for the final test as listed below.

EUTconfigure

modeMode Available

ChannelTested


ModulationType

Data Rate(Mbps)

A 802.11g 1 to 11 11 OFDM BPSK 6B 802.11g 1 to 11 11 OFDM BPSK 6

Radiated Emission Test (Above 1 GHz):

Pre-Scan has been conducted to determine the worst-case mode from all possiblecombinations between available modulations, data rates of the antenna and antenna ports (ifEUT with antenna diversity architecture).Following channel(s) was (were) selected for the final test as listed below.

EUTconfigure

modeMode Available

ChannelTested


ModulationType

Data Rate(Mbps)

A 802.11g 1 to 11 1, 6, 11 OFDM BPSK 6B 802.11g 1 to 11 1, 6, 11 OFDM BPSK 6


3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS

The EUT is a RF product, according to the specifications of the manufacturer, itmust comply with the requirements of the following standards:

FCC Part 15, Subpart B, Class B

ANSI C63.4-2003

All test items have been performed and recorded as per the above standards.

3.4 DESCRIPTION OF SUPPORT UNITS

The EUT has been tested as an independent unit together with other necessaryaccessories or support units. The following support units or accessories were usedto form a representative test configuration during the tests.

NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID1 NOTEBOOK DELL PP05L 12130898320 E2K24CLNS

2 EXTENDEDCARD NA NA NA NA

NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS1 NA2 NA

NOTE: All power cords of the above support units are non shielded (1.8m).


4 TEST TYPES AND RESULTS4.1 CONDUCTED EMISSION MEASUREMENT

4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT

FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBµV)

Quasi-peak Average 0.15-0.5

0.5-55-30

66 to 565660

56 to 464650

NOTE: 1. The lower limit shall apply at the transition frequencies.2. The limit decreases in line with the logarithm of the frequency in the range of 0.15

to 0.50 MHz.3. All emanations from a class A/B digital device or system, including any network of

conductors and apparatus connected thereto, shall not exceed the level of fieldstrengths specified above.

4.1.2 TEST INSTRUMENTS

DESCRIPTION & MANUFACTURER MODEL NO. SERIAL NO. CALIBRATEDUNTIL

Test ReceiverROHDE & SCHWARZ ESCS30 100288 Nov. 02, 2006

RF signal cableWoken 5D-FB Cable-HYCO3-01 Jan. 06, 2007

LISNROHDE & SCHWARZ ESH2-Z5 100100 Jan. 09, 2007

LISNROHDE & SCHWARZ ESH3-Z5 100311 Jan. 22, 2007

SoftwareADT ADT_Cond_V3 NA NA

NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrationsare traceable to NML/ROC and NIST/USA.

2. The test was performed in HwaYa Shielded Room 3.3. The VCCI Site Registration No. is C-2047.


4.1.3 TEST PROCEDURES

a. The EUT was placed 0.4 meters from the conducting wall of the shielded roomwith EUT being connected to the power mains through a line impedancestabilization network (LISN). Other support units were connected to the powermains through another LISN. The two LISNs provide 50 ohm/ 50uH of couplingimpedance for the measuring instrument.

b. Both lines of the power mains connected to the EUT were checked formaximum conducted interference.

c. The frequency range from 150kHz to 30MHz was searched. Emission levelsunder Limit - 20dB was not recorded.

4.1.4 DEVIATION FROM TEST STANDARD

No deviation


4.1.5 TEST SETUP

N o te : 1 .S u p p o rt u n its w e re c o n n e cted to s e c o n d L IS N .

2 .B o th o f L IS N s ( A M N ) a re 8 0 c m fro m E U T an d a t le a s t 8 0

fro m o th e r u n its a n d o th e r m e ta l p la n es

Ve rtic a l G ro u n d

R e fe ren c e P la n e

4 0 c m

8 0 cm

Te s t R e c e iv e r

H o riz o n ta l G ro u n dR efere n c e P la n e

E U T

L IS N

For the actual test configuration, please refer to the related item – Photographs ofthe Test Configuration.

4.1.6 EUT OPERATING CONDITIONS

a. Connected the EUT into Notebook via extended card placed on a testing table. b. The notebook system ran a test program (provided by manufacturer) to enable

EUT under receiving condition continuously at specific channel frequency. c. The notebook system sent "H" messages to its screen.


4.1.7 TEST RESULTS CONDUCTED WORST-CASE DATA

EUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 1 PHASE Line 1MODULATIONTYPE BPSK 6dB

BANDWIDTH 9 kHz

TRANSFER RATE 6Mbps ENVIRONMENTALCONDITIONS

25deg. C, 65%RH,991hPa

TESTED BY Jay Hsu INPUT POWER(SYSTEM) 120Vac, 60 Hz

Freq. Corr. Reading Value EmissionLevel Limit Margin

No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB)[MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV.

1 0.173 0.11 39.34 - 39.45 - 64.79 - -25.35 -2 0.275 0.11 29.06 - 29.17 - 60.97 - -31.79 -3 0.345 0.12 34.47 - 34.59 - 59.07 - -24.49 -4 2.320 0.26 26.86 - 27.12 - 56.00 - -28.88 -5 9.977 0.44 31.58 - 32.02 - 60.00 - -27.98 -6 15.355 0.58 29.35 - 29.93 - 60.00 - -30.07 -

REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value.



CHANNEL Channel 1 PHASE Line 2

MODULATIONTYPE BPSK

6dBBANDWIDTH 9 kHz






1 0.173 0.11 38.42 - 38.53 - 64.79 54.79 -26.27 -2 0.252 0.11 37.94 - 38.05 - 61.71 51.71 -23.65 -3 0.349 0.12 34.31 - 34.43 - 58.98 48.98 -24.55 -4 1.637 0.24 27.17 - 27.41 - 56.00 46.00 -28.59 -5 10.746 0.56 33.54 - 34.10 - 60.00 50.00 -25.90 -6 15.672 0.69 29.16 - 29.85 - 60.00 50.00 -30.15 -





MODULATIONTYPE BPSK

6dBBANDWIDTH 9 kHz






1 0.173 0.11 39.48 - 39.59 - 64.79 54.79 -25.21 -2 0.248 0.11 37.96 - 38.07 - 61.84 51.84 -23.76 -3 0.345 0.12 35.41 - 35.53 - 59.07 49.07 -23.55 -4 0.947 0.22 25.72 - 25.94 - 56.00 46.00 -30.06 -5 2.430 0.26 25.60 - 25.86 - 56.00 46.00 -30.14 -6 10.188 0.44 32.40 - 32.84 - 60.00 50.00 -27.16 -





MODULATIONTYPE BPSK

6dBBANDWIDTH 9 kHz






1 0.173 0.11 38.68 - 38.79 - 64.79 54.79 -26.01 -2 0.240 0.11 35.47 - 35.58 - 62.10 52.10 -26.52 -3 0.341 0.12 32.59 - 32.71 - 59.17 49.17 -26.46 -4 1.828 0.25 26.02 - 26.27 - 56.00 46.00 -29.73 -5 8.535 0.48 32.57 - 33.05 - 60.00 50.00 -26.95 -6 15.375 0.67 29.93 - 30.60 - 60.00 50.00 -29.40 -





MODULATIONTYPE BPSK

6dBBANDWIDTH 9 kHz






1 0.158 0.11 46.23 - 46.34 - 65.58 55.58 -19.24 -2 0.232 0.11 35.73 - 35.84 - 62.38 52.38 -26.54 -3 0.345 0.12 35.33 - 35.45 - 59.07 49.07 -23.63 -4 0.939 0.22 25.60 - 25.82 - 56.00 46.00 -30.18 -5 2.316 0.26 27.38 - 27.64 - 56.00 46.00 -28.36 -6 10.512 0.45 33.33 - 33.78 - 60.00 50.00 -26.22 -





MODULATIONTYPE BPSK

6dBBANDWIDTH 9 kHz






1 0.158 0.11 47.23 - 47.34 - 65.58 55.58 -18.24 -2 0.220 0.11 37.20 - 37.31 - 62.81 52.81 -25.50 -3 0.345 0.12 34.75 - 34.87 - 59.07 49.07 -24.21 -4 1.887 0.25 25.22 - 25.47 - 56.00 46.00 -30.53 -5 10.777 0.56 33.40 - 33.96 - 60.00 50.00 -26.04 -6 15.117 0.66 29.98 - 30.64 - 60.00 50.00 -29.36 -



4.2 RADIATED EMISSION MEASUREMENT

4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT

Emissions radiated outside of the specified bands, shall be according to the generalradiated limits in 15.109 as following:

FREQUENCIES (MHz) FIELD STRENGTH(microvolts/meter)

MEASUREMENT DISTANCE(meters)

30 ~ 88 100 3

88 ~ 216 150 3

216 ~ 960 200 3

Above 960 500 3NOTE:

1. The lower limit shall apply at the transition frequencies.2. Emission level (dBuV/m) = 20 log Emission level (uV/m).3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on

average detector, however, the peak field strength of any emission shall not exceed themaximum permitted average limits, specified above by more than 20dB under any condition ofmodulation.


4.2.2 TEST INSTRUMENTS

DESCRIPTION &MANUFACTURER MODEL NO. SERIAL NO.

CALIBRATEDUNTIL

Test ReceiverROHDE & SCHWARZ

ESI7 838496/016 Jan. 01, 2007

Spectrum AnalyzerROHDE & SCHWARZ

FSP40 100041 Dec. 04, 2006

BILOG AntennaSCHWARZBECK

VULB9168 9168-155 Jan. 15, 2007

HORN AntennaSCHWARZBECK

BBHA 9120D 9120D-404 Jan. 01, 2007

HORN AntennaSCHWARZBECK

BBHA 9170 BBHA9170242 Jan. 19, 2007

PreamplifierAgilent

8449B 3008A01960 Nov. 09, 2006

RF signal cableHUBER+SUHNNER

SUCOFLEX 104 219268/4 Dec. 20, 2006

RF signal cableHUBER+SUHNNER

SUCOFLEX 104 230129/4 Dec. 20, 2006

SoftwareADT.

ADT_Radiated_V5.14 NA NA

Antenna Towerinn-co GmbH

MA 4000 010303 NA

Antenna Tower Controllerinn-co GmbH

CO2000 019303 NA

Turn TableADT.

TT100. TT93021704 NA

Turn Table ControllerADT.

SC100. SC93021704 NA

NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrationsare traceable to NML/ROC and NIST/USA.

2. The test was performed in HwaYa Chamber 3.3. The horn antenna and HP preamplifier (model: 8449B) are used only for the

measurement of emission frequency above 1GHz if tested.4. The IC Site Registration No. is IC4924-4.


4.2.3 TEST PROCEDURES

a. The EUT was placed on the top of a rotating table 0.8 meters above the groundat a 3 meters semi-anechoic chamber. The table was rotated 360 degrees todetermine the position of the highest radiation.

b. The EUT was set 3 meters away from the interference-receiving antenna, whichwas mounted on the top of a variable-height antenna tower.

c. The antenna is a broadband antenna, and its height is varied from one meter tofour meters above the ground to determine the maximum value of the fieldstrength. Both horizontal and vertical polarizations of the antenna are set tomake the measurement.

d. For each suspected emission, the EUT was arranged to its worst case and thenthe antenna was tuned to heights from 1 meter to 4 meters and the rotatabletable was turned from 0 degrees to 360 degrees to find the maximum reading.

e. The test-receiver system was set to Peak Detect Function and SpecifiedBandwidth with Maximum Hold Mode.

f. If the emission level of the EUT in peak mode was lower than the limit specified,then testing could be stopped and the peak values of the EUT would bereported. Otherwise the emissions would be re-tested one by one using peak,quasi-peak or average method as specified and then reported in a data sheet.

NOTE:1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for

Peak detection (PK) and Quasi-peak detection (QP) at frequency below 1GHz.2. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 1 MHz for

Peak detection at frequency above 1GHz.

4.2.4 DEVIATION FROM TEST STANDARD

No deviation


4.2.5 TEST SETUP

For the actual test configuration, please refer to the related item – Photographs ofthe Test Configuration.

4.2.6 EUT OPERATING CONDITIONS

Same as 4.1.6


4.2.7 TEST RESULTSRADIATED WORST-CASE DATA: BELOW 1GHz


CHANNEL Channel 11 FREQUENCYRANGE Below 1000MHz

MODULATION TYPE BPSKDETECTORFUNCTION Quasi-Peak

TRANSFER RATE 6MbpsENVIRONMENTALCONDITIONS


INPUT POWER(SYSTEM) 120Vac, 60 Hz TEST MODE A

TESTED BY Brad Wu

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M

No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)

CorrectionFactor(dB/m)

1 82.48 33.57 QP 40.00 -6.43 1.25 H 10 23.44 10.132 123.31 42.32 QP 43.50 -1.18 1.50 H 286 31.04 11.283 133.03 41.58 QP 43.50 -1.92 1.25 H 73 29.03 12.554 164.13 41.68 QP 43.50 -1.82 1.00 H 61 28.71 12.975 333.25 41.20 QP 46.00 -4.80 1.25 H 13 25.32 15.896 465.43 40.39 QP 46.00 -5.61 1.25 H 13 21.30 19.087 605.39 43.72 QP 46.00 -2.28 1.25 H 52 21.11 22.61

ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M

No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 31.94 35.37 QP 40.00 -4.63 1.00 V 250 22.78 12.582 68.88 35.53 QP 40.00 -4.47 1.25 V 184 23.69 11.843 123.31 35.76 QP 43.50 -7.74 1.00 V 286 24.47 11.284 133.03 36.36 QP 43.50 -7.14 1.00 V 226 23.81 12.555 457.66 34.50 QP 46.00 -11.50 1.00 V 166 15.61 18.896 607.33 42.87 QP 46.00 -3.13 1.00 V 133 20.23 22.63

REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB)

3. The other emission levels were very low against the limit.4. Margin value = Emission level – Limit value.


RADIATED WORST-CASE DATA: BELOW 1GHzEUT TEST CONDITION MEASUREMENT DETAIL

CHANNEL Channel 11 FREQUENCYRANGE Below 1000MHz

MODULATION TYPE BPSKDETECTORFUNCTION Quasi-Peak

TRANSFER RATE 6MbpsENVIRONMENTALCONDITIONS


INPUT POWER(SYSTEM) 120Vac, 60 Hz TEST MODE B

TESTED BY Brad Wu


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 82.48 33.84 QP 40.00 -6.16 3.00 H 202 23.71 10.132 123.31 42.25 QP 43.50 -1.25 1.50 H 115 30.97 11.283 171.90 41.85 QP 43.50 -1.65 2.00 H 37 29.42 12.434 199.12 41.92 QP 43.50 -1.58 1.25 H 76 31.11 10.815 331.30 43.38 QP 46.00 -2.62 1.25 H 76 27.53 15.866 467.37 36.83 QP 46.00 -9.17 1.75 H 166 17.70 19.13


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 31.94 35.77 QP 40.00 -4.23 1.00 V 187 23.19 12.582 76.65 30.05 QP 40.00 -9.95 1.00 V 145 19.18 10.873 166.07 32.74 QP 43.50 -10.76 1.25 V 232 19.91 12.834 331.30 36.14 QP 46.00 -9.86 1.00 V 64 20.29 15.865 467.37 33.03 QP 46.00 -12.97 1.00 V 154 13.90 19.136 599.56 34.76 QP 46.00 -11.24 1.00 V 139 12.22 22.54




802.11g OFDM MODULATION


CHANNEL Channel 1 FREQUENCYRANGE 1 ~ 25GHz

MODULATION TYPE BPSKDETECTORFUNCTION

Peak(PK)Average (AV)




TESTED BY Brad Wu


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 1608.00 52.34 PK 74.00 -21.66 1.05 H 217 22.74 29.601 1608.00 42.02 AV 54.00 -11.98 1.05 H 217 12.42 29.60


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 1608.00 48.71 PK 74.00 -25.29 1.02 V 244 19.11 29.601 1608.00 38.60 AV 54.00 -15.40 1.02 V 244 9.00 29.60











TESTED BY Brad Wu


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 1624.00 52.26 PK 74.00 -21.74 1.02 H 266 22.62 29.641 1624.00 41.87 AV 54.00 -12.13 1.02 H 266 12.23 29.64


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 1624.00 48.85 PK 74.00 -25.15 1.05 V 263 19.21 29.641 1624.00 38.71 AV 54.00 -15.29 1.05 V 263 9.07 29.64











TESTED BY Brad Wu


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 1641.00 52.22 PK 74.00 -21.78 1.01 H 209 22.53 29.691 1641.00 41.93 AV 54.00 -12.07 1.01 H 209 12.24 29.69


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 1641.00 48.95 PK 74.00 -25.05 1.10 V 307 19.26 29.691 1641.00 38.84 AV 54.00 -15.16 1.10 V 307 9.15 29.69











TESTED BY Brad Wu


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 1608.00 52.49 PK 74.00 -21.51 1.06 H 234 22.89 29.601 1608.00 42.11 AV 54.00 -11.89 1.06 H 234 12.51 29.60


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 1608.00 47.62 PK 74.00 -26.38 1.01 V 213 18.02 29.601 1608.00 37.51 AV 54.00 -16.49 1.01 V 213 7.91 29.60











TESTED BY Brad Wu


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 1624.00 52.75 PK 74.00 -21.25 1.09 H 204 23.11 29.641 1624.00 42.36 AV 54.00 -11.64 1.09 H 204 12.72 29.64


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 1624.00 47.75 PK 74.00 -26.25 1.00 V 204 18.11 29.641 1624.00 37.64 AV 54.00 -16.36 1.00 V 204 8.00 29.64











TESTED BY Brad Wu


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 1641.00 52.63 PK 74.00 -21.37 1.03 H 294 22.94 29.691 1641.00 42.28 AV 54.00 -11.72 1.03 H 294 12.59 29.69


No.Freq.(MHz)

EmissionLevel

(dBuV/m)

Limit(dBuV/m)

Margin(dB)

AntennaHeight

(m)

TableAngle

(Degree)

RawValue

(dBuV)


1 1641.00 47.55 PK 74.00 -26.45 1.05 V 220 17.86 29.691 1641.00 37.42 AV 54.00 -16.58 1.05 V 220 7.73 29.69




5 PHOTOGRAPHS OF THE TEST CONFIGURATION

CONDUCTED EMISSION TEST: TEST MODE A


RADIATED EMISSION TEST: TEST MODE A


RADIATED EMISSION TEST: TEST MODE B


6 INFORMATION ON THE TESTING LABORATORIES

We, ADT Corp., were founded in 1988 to provide our best service in EMC, Radio,Telecom and Safety consultation. Our laboratories are accredited and approvedby the following approval agencies according to ISO/IEC 17025

USA FCC, UL, A2LAGermany TUV RheinlandJapan VCCINorway NEMKOCanada INDUSTRY CANADA , CSAR.O.C. CNLA, BSMI, DGTNetherlands TeleficationSingapore PSB , GOST-ASIA(MOU)Russia CERTIS(MOU)

Copies of accreditation certificates of our laboratories obtained from approvalagencies can be downloaded from our web site:www.adt.com.tw/index.5/phtml. If you have any comments, please feel free tocontact us at the following:

Linko EMC/RF Lab:Tel: 886-2-26052180Fax: 886-2-26052943

Hsin Chu EMC/RF Lab:Tel: 886-3-5935343Fax: 886-3-5935342

Hwa Ya EMC/RF/Safety/Telecom Lab:Tel: 886-3-3183232Fax: 886-3-3185050

Linko RF Lab.Tel: 886-3-3270910Fax: 886-3-3270892

Web Site: www.adt.com.tw

The address and road map of all our labs can be found in our web site also.

http://www.adt.com.tw/index.5/phtml

http://www.adt.com.tw

Report No.: FD941208L11 A-1 Report Format Version 2.0.5

APPENDIX-A

MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TOTHE EUT BY THE LAB

No any modifications are made to the EUT by the lab during the test.

fcc doc test report - laird techcdn.lairdtech.com/home/brandworld/files/testrpt-fcc_15b...test...

Documents