fasttrap/simpliline -...
TRANSCRIPT
FastTrap/SimpliLineOne-piece shower traps with waterproofi ng fl ange
Drainage by design!
2
The latest addition to our range, the
FastTrap. The 100 mm height is proving
a winner in special applications such
as older property where lack of build-in
height has to be overcome.
· foot-friendly, polished stainless steel
grate
· height adjustable for up to 46 mm thick
fl oor fi nish - mosaics to marble
· use with brush-on or membrane under-
tile tanking
· use on plywood decks or in solid fl oors
· trap completely accessible from the top
· tested to over 45 l/min fl ow rate
E 115 grate (395553069)
K-frame (309022829)
extension frame (309022827)
dip-tube (101023606)
O-ring (930051965)
trap bucket (300021192)
fl ange with fl eece surface (576622416)
outlet DN 50 x 2“ (56 mm)
BS 5255 solvent weld socket (909701974)
body (588884760)
FastTrap - one piece drainPerfect for wetrooms on timber or in solid fl oors. Polished, foot-friendly,
stainless steel grating
7-46 mm
BS 50 mm / 2“
100 mm
NEW!Optional 150 x 150 mm
Design grating
3
DALLMER FastTrap, CKC 12
fl oor drain outlet: BS 2“ horizontal,
ball-joint adjustable 0 - 15 °
with: fl ange with fl eece surface
removable trap insert
height adjustable grating
material: polypropylene with ABS
connector
grate: 304 stainless steel, class K 3
Flow rate tested to DIN EN 1253(with 20 mm water over grate)
BS 2“ 0,76 l/s
Flow rate tested to DIN EN 1253(with 20 mm water over grate)
DN 50 1,34 l/s
Item Dimension Dimension grate Part no. PU
FastTrap CKC 12 fl oor drain BS 2“ 120 x 120 mm 513137 1
Item Dimension Part no. PU
Couplings DN 50 x BS 2“ 880727 10
Item Dimension Part no. PU
Pipe couplings DN 50 x DN 50 880024 30
Item Dimension Dimension grate Part no. PU
Floor drain SimpliPlan VK 10 DN 50 95 x 95 mm 513489 1
Floor drain SimpliPlan VK 12 DN 50 120 x 120 mm 513472 1
FastTrap CKC 12 fl oor drain
50100 59267-463
”2
174
Ø260120
Floor drains FastTrap, SimpliPlan VK and couplings
floor drain SimpliPlan K 12
120
DN50
Ø315
Ø126
Ø110
7,3
58
93
30
36
50
DALLMER floor drain SimpliPlan VKoutlet: DN 50 vertical,
with: flange with fleece surface
removable trap insert
temporary blanking plate
height adjustable grating
material: polypropylene
grate: 304 stainless steel, class K 3
DALLMER floor drain SimpliPlan
VK 10frame: ABS, 95 x 95 mm
DALLMER floor drain SimpliPlan
VK 12frame: ABS, 120 x 120 mm
NEW!
DALLMER fire protection system 2
(Part No. 515025) applicableFire protection class R 30/60/90/120
approval number Z-19.17-1543
DALLMER couplingsDN 40 or DN 50 compression joint with
solvent weld socket BS 5255 2“
material: ABS
DN50
95
DN50(SML)
DALLMER pipe coupling HT/SMLfor quick connection between plastic and SML
cast iron pipework, including seal
material: polypropylene
rubber
4
Dallmer ‘Design’ gratings applicable with
Fast Trap and SimpliPlan
Dallmer Design gratesDimensions: 140 x 140, 115 x 115 or 115 diameter
Material: 5 mm 316 stainless steel, satin fi nish (other fi nishes to order on request)
colour coated grates on request
*
* * *
stated grates on requescolour co
***
*
Frame 150 x 150 with Dallmer Design grate 140 x 140
frame CKC 15
150 x 150 mm
stainless steel
+ plus
suitable
Design-grates
140 x 140 mm
QuadraStone 140
grate
Nero Assoluto
Part no. 501523
QuadraStone 140
grate
Azul Bahia
Part no. 501530
QuadraStone 140
grate
Rosso Verona
Part no. 501547
QuadraStone 140
grate
Verde Forest
Part no. 501554
QuadraStone 140
grate
Padang
Part no. 501561
*
QuadraStone 140
grate Individuell
Part no. 501509
Monogram 140
grate
Part no. 501158
Cut grate
Part no. 502315
Quadra 140 grate
Part no. 501226
Frame 120 x 120 with Dallmer Design grate 115 x 115
frame CKC 12
120 x 120 mm
stainless steel
+ plus
suitable
Design-grates
115 x 115 mm
* * *
Loire 115 Design
grate
Part no. 501615
Seine 115 Design
grate
Part no. 501622
Orinoco 115 Design
grate
Part no. 501639
Nil 115
Design grate
Part no. 501646
Yukon 115 Design
grate
Part no. 501653
Quadra 115 Design
grate
Part no. 501585
Monogram 115
grate
Part no. 501103
Frame 120 diameter with Dallmer Design grate 115 diameter
frame CKC 12 R
Ø 120 mm
stainless steel
+ plus
suitable
Design-grates
Ø 115 mm
Quadra Ø 115
Design grate
Part no. 502223
Aquarius 115
Design grate
Part no. 501806
*
* *
*
The Dallmer Fast-Trap and SimpliPlan can be supplied with any of these attractive 'Design' grate
options and an upgraded stainless steel frame.
5
SimpliLine -
Linear drainage simplifi ed
- Innovative ‚short‘ linear drain with
integral trap
- for new-build or renovation
- low build-in height
- integrated fl ange for under-tile water-
proofi ng
- stylish, stainless steel cover
- available with 50 mm or 30 mm water
seal
Cover plate
removable trap insert, 50 mm
Drain body (fl ow rate 0.8 l/min) BS 2“
connection incorporating a ball joint
Build-in height
110 mm
6
Linear drain SimpliLine 300 Plan Standard
Linear drain SimpliLine 300 Standard
Linear drain SimpliLine 300 Plan Design
Linear drain SimpliLine 300 Design
Item Dimension cover plate
Part no.DN 50
PU
Linear drain SimpliLine Plan 300 Standard 300 x 40 mm 530103 1
Linear drain SimpliLine Plan 300 Design 300 x 40 mm 530202 1
Item Dimension cover plate
Part no.DN 50
Part no.BS 2“
PU
Linear drain SimpliLine 300 Standard 300 x 40 mm 530264 530219 1
Linear drain SimpliLine 300 Design 300 x 40 mm 530271 530226 1
DALLMER linear drain SimpliLine
Plan 300Connection: Side outlet, with ball-joint
adjustable 0 - 15 °, DN 50, BS 2“
sw socket or HDPE 56 mm
with: · Waterproofi ng fl ange with
fl eece surface
· 30 mm water seal
· Trap insert easily removable
for cleaning
· Height adjustable pedestals
to level cover with mosaic, tile,
stone etc
· Tiling gauge
Drain body: Polypropylene
DALLMER linear drain SimpliLine
Plan 300 StandardCover plate: 304 stainless steel,
300 x 40 mm
load class K 3 (300 kg)
DALLMER linear drain SimpliLine
Plan 300 DesignCover plate: 304 stainless steel,
300 x 40 mm
3 mm veneer, satin fi nish,
Load class K 3 (300 kg)
DALLMER linear drain SimpliLine 300Connection: Side outlet, with ball-joint
adjustable 0 - 15 °, DN 50, BS 2“
sw socket or HDPE 56 mm
with: · Waterproofi ng fl ange with
fl eece surface
· 50 mm water seal
· Trap insert easily removable
for cleaning
· Height adjustable pedestals
to level cover with mosaic, tile,
stone etc
· Tiling gauge
Drain body: Polypropylene
DALLMER linear drain SimpliLine 300
StandardCover plate: 304 stainless steel,
300 x 40 mm
Load class K 3 (300 kg)
DALLMER linear drain SimpliLine 300
DesignCover plate: 304 stainless steel,
300 x 40 mm
3 mm veneer, satin fi nish,
Load class K3 (300kg)
Flow rate tested to DIN EN 1253(with 20 mm water over cover plate)
DN 50 0.7 l/s
Flow rate tested to DIN EN 1253(with 20 mm water over cover plate)
DN 50 0.8 l/s
Linear drain SimpliLine 300 / SimpliLine Plan 300
Build-in height
110 mm
Build-in height
110 mm
Build-in height
90 mm
Build-in height
90 mm
DN
50
210
90
58
30
428x182
296x40
15°
DN
50
210
90
58
30
428x182
296x40
15°
210
110 7
8
50
4 x18228
296x40
15°
DN
50
210
110 7
8
50
4 x18228
296x40
15°
DN
50
7
Linear drain SimpliLine vertical Standard 300
Linear drain SimpliLine vertical Design 300
DN50
Ø230
Ø126
Ø110
50
93
32-1
01
428x182296x40
DN50
Ø230
Ø126
Ø110
50
93
32-1
01
428x182296x40
Linear drain SimpliLine vertical 300
DALLMER linear drain SimpliLine
vertical 300Connection: Vertical outlet, DN 50, BS 2“ sw
socket or HDPE 56 mm
with: · Waterproofi ng fl ange with
fl eece surface
· 50 mm water seal
· Trap insert easily removable
for cleaning
· Height adjustable pedestals
to level cover with mosaic, tile,
stone etc
· Tiling gauge
Drain body: Polypropylene
DALLMER linear drain SimpliLine
vertical Standard 300Cover plate: 304 stainless steel,
300 x 40 mm
Load class K 3 (300 kg)
DALLMER linear drain SimpliLine
vertical Design 300Cover plate: 304 stainless steel,
300 x 40 mm
3 mm veneer, satin fi nish,
Load class K3 (300kg)
Flow rate tested to DIN EN 1253(with 20 mm water over cover plate)
DN 50 0.7 l/s
Can be connected to British standard
pipework with adaptor part No. 880727.
Item Dimension cover plate
Part no.DN 50
PU
Linear drain SimpliLine vertical Standard 300 300 x 40 mm 530301 1
Linear drain SimpliLine vertical Design 300 300 x 40 mm 530318 1
NEW!
NEW!
DALLMER fire protection system 2
(Part No. 515025) applicableFire protection class R 30/60/90/120
approval number Z-19.17-1543
08
.20
10
.25
33
.xxx (
xx)
Dallmer Ltd · 4, Norman Way · Lavenham · Sudbury CO10 9PY · England · Tel: +44 1787 248-244 · Fax: +44 1787 248-246
www.dallmer.com · [email protected]
Dallmer GmbH + Co KG · Wiebelsheidestraße 25 · 59757 Arnsberg · Telefon +49 2932 9616-168 · Telefax +49 2932 9616-113
www.dallmer.de · [email protected]
Drainage by design!
2 31 4
5 6
7 8 10 11
15141312
16 17 18 19 20
9
1) Air-admittance valves
2) Roof drains
3) Renova roof drains
4) Siphonic roof drainage
5) Shower and bathtub traps
6) Balcony and terrace drains
7) Complete drain assemblies
8) Fire protection systems
9) Linear drainage
10) Drain systems for under-tile
waterproofi ng
11) Wash basin traps
12) Rainwater hoppers
13) Urinal traps
14) Intelligent fl ushing systems
15) Concealed traps for washing
machines
16) Yard- and carpark drains
17) Basement drains and Klenkmatik
18) PRONTO utility drains
19) Anti-fl ooding valves
20) Rodding eyes