(fastened with 2 #14-13 x 1 1/2 dp1 fasteners 12 from … · dimensional metals, inc....

PANEL EXPANSION NOTEFOR STEEL PANELS < 40' WITH A 1 1/2" TURN DOWN AND 1 1/2" HEM CLEARANCE:1. 1/4" FOR INSTALLATION TEMPERATURE BELOW 30 DEGREES FARENHEIT2. 1/2" FOR INSTALLATION TEMPERATURE ABOVE 30 DEGREES FARENHEIT..

FOR STEEL PANELS > 40' WITH A 2" TURN DOWN AND 2" HEM CLEARANCE:1. 1/4" FOR INSTALLATION TEMPERATURE BELOW 30 DEGREES FARENHEIT.2. 1/2" FOR INSTALLATION TEMPERATURE ABOVE 30 DEGREES FARENHEIT.

FOR ALUMINUM PANELS - CONTACT DMI

GUTTER LAP NOTELAP GUTTER 3" MIN W/ 2 ROWS OF APPROVED SEALANT AND POP RIVET JOINT 2" O.C. SETIN AND CAP POP RIVETS IN APPROVED SEALANT.

FLASHING LAP NOTELAP FLASHINGS 2" MIN W/ 1 ROW OF BUTYL SEALANT.

FULL ICE AND WATER UNDERLAYMENT NOTEFOR PANEL AREAS WITH FULL ICE AND WATER UNDERLAYMENT: STRIP IN DRIP EDGE WITH6" STRIP OF APPROVED ICE AND WATER UNDERLAYMENT.

12" FROM END OF PANEL

PLYWOOD SHEATHING (MIN.5/8" THICK)

#10-13 GP PANCAKE HEADFASTENER 6" O.C. (STAGGERED)

#10-13 GP PANCAKEHEAD FASTENER 12" O.C.

#14-13 DP1 FASTENER 30" O.C.

WOOD BLOCKING

(FW) - FASCIA WRAP

(DR) - DRIP EDGE

FIELD FOLD END OF PANEL

FILL PANEL VOID AS NECESSARYWITH APPROVED SEALANT

INJECT TWO ROWS OF BUTYLSEALANT IN VERTICAL LEG

DMI DL20 EXPANSION PANEL CLIP 30" O.C. MAX.(FASTENED WITH 2 #14-13 X 1 1/2" DP1 FASTENERS

PENETRATING WOOD DECK 3/4" MIN)

DL20 DMI PANEL SYSTEM

DYNACLAD AP SYNTHETICUNDERLAYMENT

(GU) - DMI CONTINUOUS GUTTER

(GS) - DMI CONTINUOUSGUTTER STRAP 30" O.C. MAX.

(DR) - DROP

(DS) - DOWNSPOUT

POP RIVET (EIGHT PEROUTLET) AND SEAL WITH

NOVA FLEX OR EQUAL

DYNACLAD ULTRA HT WIND & WATER SEALUNDERLAYMENT (EXTEND DOWNEAVE 4” MIN. AND OVER THE TOP OF THEFASCIA WRAP AND NAILED INTO FASCIA 6" O.C.

3"=1'-0"DIMENSIONAL METALS, INC.

PROVEN DEPENDABLE SUSTAINABLE

METAL ENVELOPE SYSTEMS SINCE 1988

WWW.DMIMETALS.COM

Issue/Rev Date: Scale:

Detail:ARCHITECTURAL EAVE W/ GUTTER DL20 01-00-W

01/17





FULL ICE AND WATER UNDERLAYMENT NOTEFOR PANEL AREAS WITH FULL ICE AND WATER UNDERLAYMENT: STRIP IN DRIP EDGEWITH 6" STRIP OF APPROVED ICE AND WATER UNDERLAYMENT.



(FW) - FASCIA WRAP

(DR) - DRIP EDGE




DMI DL20 EXPANSION PANEL CLIP30" O.C. MAX. (FASTENED WITH 2#14-13 X 1 1/2" DP1 FASTENERS




DYNACLAD ULTRA HT WIND & WATERSEAL UNDERLAYMENT (EXTEND

DOWN EAVE 4” MIN. AND OVER THETOP OF THE FASCIA WRAP AND

NAILED INTO FASCIA 6" O.C.


WOOD BLOCKING





WWW.DMIMETALS.COM


Detail:ARCHITECTURAL EAVE W/ FASCIA WRAP DL20 01-01-W

01/17




GUTTER NOTESLAP GUTTER 3" MIN W/ 2 ROWS OF APPROVED SEALANT AND POP RIVET JOINT 2" O.C. SET IN AND CAP POP RIVETS IN APPROVEDSEALANT.EXPANSION JOINT REQUIRED FOR EVERY 50'-0" OF GUTTER (REFER TO MISCELLANEOUS DETAILS)


FULL ICE AND WATER UNDERLAYMENT NOTEFOR PANEL AREAS WITH FULL ICE AND WATER UNDERLAYMENT: STRIP IN DRIP EDGE WITH 6" STRIP OF APPROVED ICE AND WATERUNDERLAYMENT.



#14-13 DP1 FASTENER 30" O.C.

PLYWOOD SHEATHING

(GU) - DMI CONTINUOUS GUTTER

(GS) - DMI CONTINUOUSGUTTER STRAP 30" O.C. MAX.

(DR) - DRIP EDGE









FASCIA PANEL


(DS) - DOWNSPOUT

POP RIVET (EIGHT PER OUTLET) ANDSEAL WITH NOVA FLEX OR EQUAL


(SI) - SILL

DYNACLAD ULTRA HT WIND & WATER SEALUNDERLAYMENT (EXTEND DOWN EAVE ANDOVER SILL 4” MIN. NAILED INTO FASCIA 6” O.C.

(DR) - DROP

(SI) - SILL





WWW.DMIMETALS.COM


Detail:ARCHITECTURAL EAVE W/ GUTTER DL20 01-02-W

01/17





FULL ICE AND WATER UNDERLAYMENT NOTEFOR PANEL AREAS WITH FULL ICE AND WATER UNDERLAYMENT: STRIP IN DRIPEDGE WITH 6" STRIP OF APPROVED ICE AND WATER UNDERLAYMENT.











PLYWOOD SHEATHING

(DR) - DRIP EDGE

FASCIA PANEL

(SI) - SILL


(JC) - J CLOSURE

DYNACLAD ULTRA HTWIND & WATER SEAL

UNDERLAYMENT (EXTEND DOWNEAVE 4” MIN. NAILED INTO

FASCIA 6” O.C.






WWW.DMIMETALS.COM


Detail:ARCHITECTURAL EAVE W/ FASCIA PANEL DL20 01-03-W

01/17




INTERIOR GUTTER DESIGN TO BE PER SMACNA GUIDELINES


FULL ICE AND WATER UNDERLAYMENT NOTEFOR PANEL AREAS WITH FULL ICE AND WATER UNDERLAYMENT: STRIP IN DRIP EDGEWITH 6" STRIP OF APPROVED ICE AND WATER UNDERLAYMENT.

12" FROM END OF PANEL#10-13 GP PANCAKE HEADFASTENER 6" O.C. (STAGGERED)




BUTYL SEALANT(APPLY LIBERALLY)

DMI DL20 EXPANSION PANEL CLIP 30" O.C. MAX.(FASTENED WITH 2 #14-13 X 1 1/2" DP1

FASTENERS PENETRATING WOOD DECK 3/4" MIN)

(DR) - DRIP EDGE




(CF) - CAP FLASHING

(CL) - CLEAT#10-13 GP PANCAKEHEAD FASTENERS 12" O.C.

(CL) - CLEAT

E.I.F.S. SYSTEMPLYWOOD SHEATHING

60 MIL EPDM EXTEND UP ROOF24" MIN.

WOOD BLOCKING

BUTYL SEALANT




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL EAVE DL20 01-04-W

01/17

12" MAXIMUM

EXPANSION NOTERIDGES EXCEEDING 100'-0" IN LENGTH REQUIRE THE USE OF A 6" COVER PLATE.

FLASHING LAP NOTELAP RIDGE/HIP 4" MIN W/ 2 ROWS OF BUTYL SEALANT.DO NOT POP RIVET LAPPED FLASHINGS.



(RI / HI) - RIDGE / HIP

TWO CONTINUOUS ROWSOF BUTYL TAPE

FOUR #10-13 X 1" GP PANCAKEHEAD FASTENERS PER PANEL MIN.

INJECT APPROVED SEALANT BETWEENPANEL LEG AND Z CLOSURE

POP RIVET 8" O.C.


1/4" WOOD FILLER

BOX END OF PANEL ANDINJECT APPROVEDSEALANT IN CORNERS

DMI DL20 EXPANSION PANEL CLIP 30"O.C. MAX. (FASTENED WITH 2 #14-13X 1 1/2" DP1 FASTENERSPENETRATING WOOD DECK 3/4" MIN)

(ZC) - ZEE CLOSURE (SEE SHEETFOR INSTALLATION INSTRUCTIONS)




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL RIDGE / HIP DL20 02-00-W

01/17

2"

12" MAXIMUM



VENTILATION NOTEDMI PERFORATED Z CLOSURE PROVIDES 23% NET FREE AIR MOVEMENT.HIP CONDITIONS CAN NOT BE VENTED.

1"

1"



OPTIONAL VENTING FABRIC

8-15 X 9/16" LATHHEAD SCREW 12" O.C.

BOX END OF PANEL AND INJECTAPPROVED SEALANT IN CORNERS

(VRI) - VENTED RIDGE

POP RIVET 8" O.C.


FOUR #10-13 X 1" GPPANCAKE HEAD FASTENERS

PER PANEL MIN.

INJECT APPROVEDSEALANT BETWEEN PANEL

LEG AND Z CLOSURE

(PZC) - PERFORATEDZEE CLOSURE

TWO CONTINUOUSROWS OF BUTYL TAPE

1/4" WOOD FILLER

DMI DL20 EXPANSION PANEL CLIP30" O.C. MAX. (FASTENED WITH 2#14-13 X 1 1/2" DP1 FASTENERSPENETRATING WOOD DECK 3/4" MIN)

(ZC) - ZEE CLOSURE (SEESHEET FOR INSTALLATION

INSTRUCTIONS)




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL VENTED RIDGE DL20 02-01-W

01/17

2" CAP OVERLAP 6" COVER PLATE

2 ROWS OF BUTYL SEALANT EACH SIDE



TONG HEMS AROUND CAPS




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL RIDGE COVER PLATE DL20 02-03-W

01/17



PANELS EXCEEDING 40' ADD 1" PER 10' TO EACH SIDE.FOR ALUMINUM PANELS - CONTACT DMINOP POP RIVETS OR FASTENERS ON EXPOSED WEATHER SIDE OF CLEAT.

INVERTED V NOTEON ROOF PITCHES OVER 6:12 OR PANEL LENGTHS EXCEEDING 60' OR ON DISSIMILARPITCHES INCREASE THE INVERTED V IN THE VALLEY TO 2".

FLASHING LAP NOTELAP VALLEY 8" MIN. WITH 2 ROWS OF APPROVED SEALANT.


6" MIN.

6" MIN. LAP

(VA) - VALLEY(CL) - CLEAT



INJECT TWO ROWS OF APPROVEDSEALANT IN VERTICAL LEG



#10-13 GP PANCAKEHEAD FASTENERS 3" O.C.

INVERTED V 1" MIN.(SEE NOTE ABOVE)


DYNACLAD ULTRA HT WIND &WATER SEAL UNDERLAYMENT





WWW.DMIMETALS.COM


Detail:ARCHITECTURAL VALLEY DL20 03-00-W

01/17

FLASHING LAP NOTELAP RAKE EDGE AND FASCIA 2" MINIMUM WITH 1 ROW OF BUTYL SEALANT.

#10-13 GP PANCAKE HEADFASTENER 12" O.C.




DYNACLAD ULTRA HT WIND & WATERSEAL UNDERLAYMENT TO EXTEND

DOWN RAKE EDGE 4” MIN. AND OVERTHE TOP OF THE FASCIA WRAP AND

NAILED INTO FASCIA 6” O.C.

FIELD FOLD SIDE OF PANEL

(RA) - RAKE EDGE

(FW) - FASCIA WRAP

WOOD BLOCKING


1/4" WOOD FILLER





WWW.DMIMETALS.COM


Detail:ARCHITECTURAL RAKE EDGE DL20 04-00-W

01/17

FLASHING LAP NOTELAP RAKE EDGE AND FASCIA 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.


#10-13 GP PANCAKE HEAD FASTENER.SEAL HEADS WITH BUTYL SEALANT.


(RA) - RAKE EDGE

(FW) - FASCIA WRAP

WOOD BLOCKING

POP RIVET 12" O.C. DONOT PENETRATE PANEL LEG




DL20 DMI PANEL SYSTEMONE CONTINUOUSROW OF BUTYL TAPE

(JC) - J CLOSURE

DYNACLAD ULTRA HT WIND & WATERSEAL UNDERLAYMENT TO EXTEND

DOWN RAKE EDGE 4” MIN. AND OVERTHE TOP OF THE FASCIA WRAP AND

NAILED INTO FASCIA 6” O.C.

(CL) - CLEAT




WWW.DMIMETALS.COM



01/17


(FW) - FASCIA WRAP


WOOD BLOCKING

WOOD BLOCKING

FULL DYNACLAD ULTRA HTWIND & WATER SEAL UNDERLAYMENT

TO EXTEND DOWN RAKEEDGE 4” MIN. AND OVER THE TOP OFTHE FASCIA WRAP AND NAILED INTO

FASCIA 6” O.C.

DMI DL20 EXPANSION PANEL CLIP 30"O.C. MAX. (FASTENED WITH 2 #14-13 X1 1/2" DP1 FASTENERS PENETRATINGWOOD DECK 3/4" MIN)

ONE CONTINUOUS ROW OFBUTYL TAPE ON BOTH SIDES

1/4-14 X 7/8" DP1 LAP ZAC ZINCCAP W/ EPDM WASHER @ 12" O.C.

(RA) - ANGLE

(SRA) - RAKE ANGLEW/SLOTTED HOLES IN

BOTTOM LEG TO ALLOWTHERMAL MOVEMENT

ONE CONTINUOUS ROW OFBUTYL TAPE ON BOTH SIDES

(RE) - RAKE EDGE

(CL) - CLEAT

SHOULDER BOLT 24" O.C.

FLASHING LAP NOTELAP RAKE EDGE AND FASCIA 2" MINIMUM WITH 1 ROW OF BUTYL SEALANT.




WWW.DMIMETALS.COM



01/17

NOTEREGLET FLASHING TO BE INSTALLED BELOW ALL WEEP HOLES.SURFACED MOUNT COUNTERFLASHINGS NOT ACCEPTABLE..

FLASHING LAP NOTELAP RAKE WALL REGLET 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

6"8"

ONE CONTINUOUSROW OF BUTYL TAPE

POP RIVET 12" O.C.

MASONRY

WEDGE SPACED 12" O.C.

CONTINUOUS NOVA FLEX SEALANT

(RC) - REGLET COUNTERFLASHING

(RW) - RAKE WALL



(EXTEND UP WALL 8" MIN.)


MASONRY WEEPTHROUGH WALL FLASHING

STAINLESS STEELCAVITY WALL FLASHING


1/4" WOOD FILLER




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL RAKE WALL DL20 05-00-W

01/17

FLASHING LAP NOTELAP RAKE WALL AND RAT GUARD (SLOPED) 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

6"

2"

POP RIVET 12" O.C.

PLYWOOD SHEATHING


WALL PANEL

(RG) - RAT GUARD (SLOPED)

(RW) - RAKE WALL







1/4" WOOD FILLER

APPROVED BUILDING WRAP




WWW.DMIMETALS.COM



01/17

FLASHING LAP NOTELAP RAKE WALL AND RAT GUARD (SLOPED) 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

2"8"


POP RIVET 12" O.C. DO NOTPENETRATE PANEL LEG

(JC) - J CLOSURE

#10-13 GP PANCAKE HEADFASTENER 12" O.C. SET IN AND

CAP WITH APPROVED SEALANT

PLYWOOD SHEATHING

WALL PANEL

(RG) - RAT GUARD (SLOPED)

(RW) - RAKE WALL











WWW.DMIMETALS.COM



01/17

NOTE: INTEGRATE COUNTER FLASHINGINTO NEW MASONRY THRU WALL FLASHING


NOVA FLEX CONTINUOUS SEALANT


(RW) - RAKE WALL

1/4-14 X 7/8" DP1 LAP ZAC ZINCCAP W/ EPDM WASHER @ 8" O.C.

SHOULDER BOLT 24" O.C.

FULL DYNACLAD ULTRA HT WINDAND WATER SEAL UNDERLAYMENT

TO EXTEND UP WALL 8"

MASONRY


(SRA) - RAKE ANGLEW/SLOTTED HOLES INBOTTOM LEG TO ALLOWTHERMAL MOVEMENT

(RA) - ANGLE

3/16" SAWCUT REGLET



FLASHING LAP NOTELAP RAKE WALL REGLET 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.




WWW.DMIMETALS.COM



01/17

FLASHING LAP NOTELAP APRON AND RAT GUARD (SLOPED) 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

3"

12" MAXIMUM



#10-13 GP PANCAKE HEADFASTENERS 12" O.C.

PLYWOOD SHEATHING






(AP) - APRON

PLYWOOD SHEATHING

WALL PANEL

(RG) - RAT GUARD

#10-13 GP PANCAKE HEADFASTENERS 12" O.C.

1/4" WOOD FILLER

POP RIVET 8" O.C.

INJECT APPROVED SEALANTBETWEEN PANEL AND Z CLOSURE


FOUR #10-13 GP PANCAKE HEADFASTENERS PER PANEL MIN.






WWW.DMIMETALS.COM


Detail:ARCHITECTURAL APRON W/ WALL PANEL DL20 06-00-W

01/17


FLASHING LAP NOTELAP APRON AND REGLET 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

3"

(AP) - APRON

MASONRY


CONTINUOUS NOVAFLEX SEALANT(RC) - REGLET

COUNTERFLASHING

MASONRY WEEP THROUGH WALL FLASHING

STAINLESS STEEL CAVITY WALL FLASHING

MASONRY FASTENER @ 12" O.C.

8"

12" MAXIMUM








POP RIVET 8" O.C.





1/4" WOOD FILLER




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL APRON DL20 06-01-W

01/17

1"

1"

1"

FLASHING LAP NOTELAP APRON AND RAT GUARD (SLOPED) 2" MIN W/ 2 ROWS OF BUTYL SEALANT.DO NOT POP RIVET LAPPED FLASHINGS.

VENTILATION NOTEDMI PERFORATED Z CLOSURE PROVIDES 23% NET FREE AIR MOVEMENT.

3"12" MAXIMUM



#10-13 GP PANCAKEHEAD FASTENERS12" O.C.

PLYWOOD SHEATHING





(PZC) - PERFORATED Z CLOSURE

8-15 X 9/16" LATH HEADSCREW 12" O.C.

(AP) - APRON

PLYWOOD SHEATHING

WALL PANEL

(RG) - RAT GUARD


POP RIVET 8" O.C.

1/4" WOOD FILLER









WWW.DMIMETALS.COM


Detail:ARCHITECTURAL VENTED APRON DL20 06-02-W

01/17

1"

3"


FLASHING LAP NOTELAP APRON AND RAT GUARD (SLOPED) 2" MIN W/ 2 ROWS OF BUTYL SEALANT.DO NOT POP RIVET LAPPED FLASHINGS.

VENTILATION NOTEDMI PERFORATED Z CLOSURE PROVIDES 23% NET FREE AIR MOVEMENT.

MASONRYFASTENER @12" O.C.

(AP) - APRON

MASONRY


CONTINUOUS NOVAFLEX SEALANT

(RC) - REGLETCOUNTERFLASHING

MASONRY WEEP THROUGHWALL FLASHING


1/4" WOOD FILLER

1"

1"

12" MAXIMUM







(PZC) - PERFORATED Z CLOSURE

8-15 X 9/16" LATH HEADSCREW 12" O.C.


POP RIVET 8" O.C.








WWW.DMIMETALS.COM


Detail:ARCHITECTURAL VENTED APRON DL20 06-03-W

01/17

FLASHING LAP NOTELAP APRON AND REGLET 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

3"

12" MAXIMUM








POP RIVET 8" O.C.





1-1/4" SS RING SHANKNAIL 12" O.C.

(CO) - DYNACLAD EDGESNAP-ON COPING

(AC) - ANCHOR CLEAT

#9-15 X 1-1/2" SS FASTENER(4 PER ANCHOR CLEAT)

MEMBRANE




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL APRON W/ COPING DL20 06-04-W

01/17

EXPANSION NOTEPEAK CAPS EXCEEDING 100'-0" IN LENGTH REQUIRE THE USE OF A 6" COVER PLATE.

FLASHING LAP NOTELAP PEAK AND CLEATS 2" MIN W/ 2 ROWS OF BUTYL SEALANT.DO NOT POP RIVET LAPPED FLASHINGS.

12" MAXIMUM

(PC) - PEAK CAPDYNACLAD AP SYNTHETICUNDERLAYMENT EXTEND

DOWN FACE 4" MIN.


PENETRATING WOOD DECK 3/4" MIN)DL20 DMI PANEL SYSTEM

POP RIVET 8" O.C.

(CL) - CLEAT


POP RIVET 12" O.C.

PLYWOOD SHEATHING


MEMBRANE ROOFING


1/4" WOOD FILLER








WWW.DMIMETALS.COM


Detail:ARCHITECTURAL PEAK DL20 07-00-W

01/17

EXPANSION NOTEPEAK CAPS EXCEEDING 100'-0" IN LENGTH REQUIRE THE USE OF A 6" COVER PLATE.

FLASHING LAP NOTELAP PEAK AND CLEATS 2" MIN W/ 2 ROWS OF BUTYL SEALANT.DO NOT POP RIVET LAPPED FLASHINGS.

12" MAXIMUM (JC) - J CLOSURE

#10-13 GP PANCAKE HEADFASTENER 12" O.C.

POP RIVET 12" O.C.

WALL PANEL

DYNACLAD AP SYNTHETICUNDERLAYMENT EXTEND

DOWN FACE 4" MIN.




POP RIVET 8" O.C.(ZC) - ZEE CLOSURE (SEE SHEET

FOR INSTALLATION INSTRUCTIONS)

PLYWOOD SHEATHING


(PC) - PEAK CAP1/4" WOOD FILLER









WWW.DMIMETALS.COM


Detail:ARCHITECTURAL PEAK W/ WALL PANEL DL20 07-01-W

01/17

±

FLASHING LAP NOTELAP EXPANSION JOINT AND J CLOSURE 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

CONTINUOUS FLEXIBLE MEMBRANE -EXTEND 12" MIN. IN EACH DIRECTION.

#10-13 GP PANCAKE HEADFASTENER 12" O.C. SET IN ANDCAP WITH APPROVED SEALANTWOOD BLOCKING

BUILDING EXPANSION FROM DESIGNDRAWINGS OR FIELD DIMENSIONS




POP RIVET 12" O.C. DONOT PENETRATE PANEL LEG

(EJ) - EXPANSION JOINT

BATT INSULATION

(JC) - J CLOSURE





WWW.DMIMETALS.COM


Detail:ARCHITECTURAL EXPANSION JOINT DL20 08-00-W

01/17

AutoCAD SHX Text

a

AutoCAD SHX Text

a+1/4"

AutoCAD SHX Text

a-1/4"

AutoCAD SHX Text

2a

±


FLASHING LAP NOTELAP RAKE WALL AND REGLET 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

BUILDING EXPANSIONFROM DESIGN DRAWINGSOR FIELD DIMENSIONS


#10-13 GP PANCAKE HEADFASTENER 12" O.C. SET IN AND

CAP WITH APPROVED SEALANT

BATT INSULATION

(RWEJ) - RAKE WALL EXPANSION JOINT

(JC) - J CLOSURE




MASONRY


CONTINUOUS NOVA FLEX SEALANT


MASONRY WEEP THROUGHWALL FLASHING


MASONRY FASTENER@ 12" O.C.




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL EXPANSION JOINT DL20 08-01-W

01/17

AutoCAD SHX Text

a

AutoCAD SHX Text

a-1/4"

AutoCAD SHX Text

2a

AutoCAD SHX Text

a+1/4"

18" MIN.





8" M

IN.



MEMBRANE ROOFING

(TF) - TRANSITION FLASHINGFIELD FOLD END OF PANEL








(CL) - CLEAT





WWW.DMIMETALS.COM


Detail:ARCHITECTURAL TRANSITION DL20 09-00-W

01/17

3/4"

3/4"

NOTEDO NOT ATTACH INTO SOLID SUBSTRATE BELOW.

BOOT SHALL NOT INTERSECT STANDING SEAM VERTICAL LEG. INSTALL IN FLAT AREA OF PANEL ONLY.IF USING A SQUARE BOOT DETAIL BE SURE TO SET BOOT IN A DIAGONAL OR DIAMOND TO ALLOW WATER FLOW.

DEKTITE PIPE BOOT OR EQUAL

DMI PANEL SYSTEM

ADJUSTABLE STAINLESS STEEL BAND

1/4-14 X 7/8" STAINLESS PANELLAP FASTENERS OR EQUAL 2"

O.C. THROUGH COMPRESSIONRING (SET IN SEALANT).

CONTINUOUS APPROVED SEALANT

DMI PANEL SYSTEM

1

"

M

I

N

.

1/4 X 1 1/8" STAINLESS TEKSFASTENERS OR EQUAL 2" O.C.

THROUGH COMPRESSION RINGDEKTITE PIPE BOOT OR EQUAL




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL PIPE BOOT DETAIL DL20 10-00-W

01/17

SECTION "A"

CURB DETAIL INSTRUCTIONS

B

4'-0" WIDTH OR LESS

B

A

6" OVERLAP

EXTEND BACK 2" MIN. PASTEDGE OF RAKE FLASHING

FIELD FOLD AROUND CLEAT

ANTI-SIPHON HEM

DMI PANEL SYSTEM

INJECT TWO ROWS OF APPROVEDSEALANT IN VERTICAL SEAM LEG

CLEAT FASTENED AT 6" O.C. SETIN TWO ROWS OF BUTYL TAPE

APPROVED UNDERLAYMENT

BOX ENTIRE CURB WITH 36"OF SELF ADHERED ICE AND

WATER UNDERLAYMENT

1'-0"

FIELD WRAPAROUND FLASHING

CURB VALLEY FLASHING

CURB CAP FLASHING

METAL CURB

CURB CAP FLASHING CURB APRONPOP RIVET 12" O.C.

DMI PANEL SYSTEM

INJECT APPROVED SEALANTBETWEEN PANEL LEG AND Z CLOSURE

BOX END OF PANEL TO FULL LEGHEIGHT AND INJECT APPROVED

SEALANT IN CORNERS

Z CLOSURE FASTENED 6" O.C. FORRAKE EDGE AND 4 FASTENERS

PER PANEL FOR APRON. SET INTWO ROWS OF BUTYL TAPE.

6" MIN. OPENING BETWEENCURB AND PANEL LEG




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL CURB DL20 11-00-W

01/17

1

2

3

45

Step 1: Fold small lip 180°Step 2: Fold outer lip (approx.) 180°Step 3: Notch zee closure.Step 4: Apply two rows of butyl tape to

underside of zee.Step 5: Install zee closure.Step 6: Seal all contact points of zee and panel legs.

Also seal over top of panel leg.

6

2

A

SECTION A-AA

4


FASTENERS PERSHOP DRAWINGS




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL Z INSTALLATION GUIDE DL20 12-00-W

01/17

(fastened with 2 #14-13 x 1 1/2 dp1 fasteners 12 from … · dimensional metals, inc....

Documents