farmer friendly - sisco-inc.com
TRANSCRIPT
2
The rear entry gate allows easy access into the trough for cleaning and loading round bales from the rear.
700 Series Standard Features
The 700 Series are double wide models designed for all sizes of round and square bales, chopped green feeds, and TMR. Wheeled models have great stability and weight handling capacity. The 180° turning front dolly makes them easy to maneuver.
All sizes are available with wheels or stationary legs.
The fold-up, extendable tongue lifts out of the way and is easy to hook up.
The rear gate drops to allow you to slide multiple large bales in from the end.
700 Series
CF710DRB
The inverted “V” divider along with Farmco’s slanted trough sides minimize accumulation in the bottom of the trough and make it easier to clean out. Less waste. Less work.
Standard Features for all Farmco Feeders
Slanted trough sides minimize old feed accumu-lation and make it easy to clean out. Less waste. Less work.
Livestock FeedersFarmco livestock feeders are some of the most durable cattle feeders on the market and the preferred choice of many farmers and ranchers across America. Farmco is an industry leader in feeders for large cattle, young stock, small animals, and horses.
A wide variety of options and sizes makes it easy to buy an ideal feeder whether you have a large cattle herd or a few small animals.
Extendable tongue for easy hook-up is standard.
Drain holes in every trough allow water to drain.
Reinforced rear axles on all transportable models hold up over rough farm terrain.
1” Square tubing is used for all slant bars.
12 Gauge trough pans are standard on cattle feeders.
“Quality piece of equipment for the right price. You really get your money’s worth.”
CUSTOMERS SPEAK
www.Farmco.ag 3
700 Series Standard Features
Options
700 Series
Roof kit (10’ feeders only) with galvanized tin pre-serves your hay and feed quality.
Wheels or stationary legs are available on all sizes.
Skid feet available in all sizes. For moving purposes— not recom-mended above 16’. D-ring is standard with the skid feet option.
Galvanized sheet feeding inserts (used with EZ Clean-Out racks).
CF708SRB CF720DRB
CF710LRB
ModelFeed
Openings Wheels/Legs Dimensions
CF708LRB 20 On Legs 84" x 8'
CF710LRB 22 On Legs 84" x 10’
CF716LRB 30 On Legs 84" x 16’
CF710DRB 20 15x8 Rims 84" x 10’
CF716DRB 28 15x8 Rims 84" x 16’
CF720DRB 36 15x8 Rims 84" x 20’
CF724DRB 42 15x8 Rims 84" x 24’
Reduce hay waste with the EZ Clean-Out hay saver racks. The racks keep the bale centered and decrease the amount of hay that falls to the ground.
The EZ Clean-Out rack folds aside for quick and easy clean-out.
4
ModelFeed
Openings Wheels Dimensions
516HL 18 15x6 Rims 16' x 57"
520HL 24 15x6 Rims 20' x 57"
524HL 28 15x6 Rims 24' x 57"
710HL 19 15x6 Rims 10' x 84"
720HL 27 15x6 Rims 20' x 84"
HL Series Standard Features
Farmco partnered with Sturdy Built to offer the HL Series feeder wagons with headlocks. Adjustable headlocks secure livestock 10-months old or older. Headlock feeder wagons are a great way to catch animals for ear tagging, artificial insemination, and vaccination. Lock up one animal or the entire herd.
• 1.9” O.D. high yield tube
• Yoke stabilizer
• 1 3/4” tapered bearing spindles
Headlocks by:
• Galvanized, durable construction
• 1” structural pipe on verticals and locks
• Wide open design and precise mechanism
• Automatic down cow release for added safety
• 3 width adjustments for variation in animal size
• Individual cow release
HL Series
End gate swings wide for easy access for clean-ing and tending cattle. Convenient and secure latch.
Two front corner jacks add stability.
Single handle release frees all cattle at once or release cattle one at a time with individual locks.
Bottom release headlock will release a fallen cow and not choke it. Swivel point is centered on headlock and opens wide at the bottom when a cow falls.
Clamp-on headlocks are easy to install and replace.
Individual cow release shown in locked position (top) and unlocked posi-tion (bottom).
CF720HL
CF524HL
www.Farmco.ag 5
Model#Feed
Openings Wheels/Legs Dimensions
CF6608S 16 Skids with tow ring 66" x 8’
CF6610S 18 Skids with tow ring 66" x10’
CF6616S 26 Skids with tow ring 66" x 16’
CF 6610D 16 15x6 Rims 66" x 10’
CF6616D 24 15x6 Rims 66" x 16’
CF6620D 34 15x8 Rims 66" x 20’
CF6624D 40 15x8 Rims 66" x 24’
CF6632D 52 Six wheels (15x8 & 15x6) tandem wheels
66" x 32’
66 Series Standard Features
The 66 Series features a 5 1/2’ wide trough that accommodates both round and large square bales. 66 Series has greater capacity than the 400 and 200 Series feeders.
66 Series
Trough pan is reinforced with inverted “V” channel.
Dolly swivels 180° and tongue folds up out of the way for feeding.
CF6610S CF6620D
“I recommend Farmco. Their products live up to promised performance.”
CUSTOMERS SPEAK
Skid feet available in all sizes. For moving purposes —not recom-mended above 16’. D-ring is standard with the skid feet option.
6
Model#Feed
Openings Wheels Dimensions
CF416 27 15x6 Rims 16' x 47"
CF420 33 15x6 Rims 20' x 47"
CF424 39 15x6 Rims 24' x 47"
CF432 51 15x6 Rims 32' x 47"
Model#Feed
Openings Wheels Dimensions
CF216 28 15x6 Rims 16' x 47"
CF220 34 15 x 6 Rims 20' x 47"
CF224 40 15 x 6 Rims 24' x 47"
400 Series Standard Features
The 400 Series are a convenient 4’ wide. These top loading feeders are eas-ily transported to and from the field. They are designed to efficiently feed TMR or chopped green feeds to cattle out on pasture.
400 Series & 200 Series
CF216CF424D
200 Series Standard Features
The 200 Series cattle feeders are a cost effective alternative to the four-wheeled 400 Series feeder wagons if a more stationary placement is acceptable. Like the 400 Series the 200 Series feeders are designed to efficiently feed TMR or chopped green feeds.
A slide out tongue and retractable front leg jacks make it easy to hitch up and go.
Tongue stows away for animal safety while feeding.
“Quality piece of equipment for the right price. You really get your money’s worth.”
CUSTOMERS SPEAK
CF224
www.Farmco.ag 7
Option
The L Series bunk feeders have a 16” deep by 47” wide trough available with or without slant bars. Four drain holes to eliminate water in the trough and a heavy duty 12-gauge steel pan give these feeders a long solid life.
No Slant Bars
Oversized U-channel legs are reinforced in the corners.
Model#Feed
Openings Legs Dimensions
CF8CF 22 Adjustable Legs 8’ x 36”
CF10CF 24 Adjustable Legs 10’ x 36”
CF12CF 26 Adjustable Legs 12’ x 36”
CF16CF 30 Adjustable Legs 16’ x 36”
Calf Feeder Standard Features
The CF Series is designed specifically for the smaller calves and comes standard with adjustable legs so you can change the height of the feeder as your calves grow. Fabricated similar to the L Series bunk feeder, you are ensured many years of use.
Adjustable legs
Model#Feed
Openings Legs Dimensions
CF8L 16 Legs 8’x 47"
CF10L 18 Legs 10’ x 47"
CF12L 20 Legs 12’ x 47"
CF16L 28 Legs 16’ x 47"
CF20L 34 Legs 20’ x 47"
CF24L 40 Legs 24’ x 47"
L Series Standard Features
L Series & Calf Feeders
CF10CFCF10L
8
FL Series
“Over the phone purchase, simple as pie.”
CUSTOMERS SPEAKModel#
Feed Openings Legs Dimensions
CF10FL 8 Legs 10' x 34"
CF16FL 13 Legs 16' x 34"
CF20FL 16 Legs 20' x 34"
CF24FL 21 Legs 24' x 34"
FL Series Standard Features
FL Series bunk feeders are designed to position just inside a fence so you can dump feed in from the outside. No more climbing on and off your loader to open and close gates! They also work great for receiving feed directly from your TMR mixer. The FL Series feeders are constructed to the same specifica-tions as the L Series.
CF10FL CF20FL
www.Farmco.ag 9
The Model 832R is ideal for feeding hay and grain. It is built with a 12-gauge steel formed pan and 3/8” steel rod basket.
These feeders are constructed with the same materials as the large cattle and horse feeders. They are sized for miniature horses, sheep, and goats. The grain trough is low enough for lambs and kids to reach.
Model#Trough Height
Leg Height Dimensions Weight
CF4832R19 25” 19” 48” x 32” x 58 “H 210
CF832R19 25” 19” 96” x 32” x 58 “H 325
Model#Trough Height
Leg Height Dimensions Weight
CF4832R8 14” 8" 32" x 48" x 47"H 195
CF832R8 14” 8" 32" x 96" x 47"H 310
32 Series Standard Features
Standard Features
The Model 750R heavy duty bale ring is ideal for isolation pens or the small hobby farmer. The slant bar frame is rolled from 1” x 2” x 1/8” tube and solid welded to the 1” square slant bars and the 14-gauge bottom ring. The unit is split into two half round sections with conve-nient latch pins on both sides. This allows you to put a bale in place and secure the feeder around the bale.
Model#Feed
Openings Dimensions
CF750R 18 7 1/2’ round 2-section
Bale Ring
32 Series & Bale Ring
Small Animal Feeders
CF750R
CF4832R8
CF832R19
Two latch pins allow splitting the ring for easy movement.
10
Model# Rear Axle Capacity HubsSpindle
SizeBearing
Diameter Reach PoleTread Width Rims
Recommended Tires
Weight w/o rims
88 Single 16,000 lbs. 6 Bolt 1 3/4" 1 1/2 & 1 1/4 80" 2 1/2" Sch. 40 pipe 74" 15x8 11L15 510
98 Single 16,000 lbs. 6 Bolt 1 3/4" 1 1/2 & 1 1/4 80" 2 1/2" Sch. 40 pipe 88" 15x8 11L15 585
108 Single 20,000 lbs. 8 Bolt 2 1/8" 1 3/4 & 1 3/8 80" 2 1/2" Sch. 80 pipe 77" 15x10 11L15 or 12.5L15 675
1208 Tandem 24,000 lbs. 8 Bolt 2 1/8" 1 3/4 & 1 3/8 80" 2 1/2" Sch. 80 pipe 77" 15x10 11L15 or 12.5L15 940
Wagon Gears Standard Features
Tire Options
Farmco wagon gears are ready for everyday farm abuse! Towing is straight and true with a heavy duty, automotive-type steering mechanism and an adjustable steering rod. Easily mount your gravity bin or bale wagon with the adjustable length reach pole and mounting stakes.
The Model 1208 is an ideal running gear for use under forage boxes and other heavy-duty applica-tions. The tandem walking beam pivot point is 2” off center for reduced stress on tandem axles when turning. Formed steel axle assemblies are rigidly reinforced and gusseted to give the best capacity for the weight. The heavy-wall, round-tubing reach pole resists bending under pressure.
120” reach pole available for 20’ or longer applications
Wagon Gears
Extendable tongue for easy hookup.
Carlise Tires 11L15-8 ply tires Carlise 12.5L15-10 ply tires
Oversized hubs and spin-dles with grease fittings and heavy-duty bearings.
WG88 WG1208
Spring assisted tongue for easy lifting.
Tandem axle models feature a walking beam that is offset 2” toward the rear axle. Because this throws a little more weight on the rear axle, the front axle enters holes and ditches more smoothly. The offset walking beam creates greater stability and a better ride over uneven ground.
www.Farmco.ag 11
Model#Rear Axle Capacity Main Beam Hubs Spindle Size
Tapered Roller Bearing
DiameterTread Width Rims
Recom-mended
Tires Weight
1308 Single 16,000 lbs.
4" x 8" x 1/4" wall 26,000 lbs. 8 Bolt 6,000 lbs. 2.16” & 1.63” 84" 16.1 x 11-8 or 22.5 x 13-8
1690 lbs. w/ 14L tires
1808 Tandem 16,000 lbs.
4" x 8" x 1/4" wall 36,000 lbs. 8 Bolt 6,000 lbs. 2.16” & 1.63” 84" 16.1 x 11-8 or 22.5 x 13-8
3610 lbs. w/ single 445 tires
Articulating Wagon Gears Standard Features
What if you could drive your wagons through large potholes and ditches without stressing your wagon gear? Farmco articulating wagon gears are designed for no-stress flex while traveling through holes and over ridges. The revolutionary double-coupling pole design removes all stress and wear points common in traditional wagon gears. There are no rotating collars to wear out. These wagon gears are designed and manu-factured for use with today’s high horsepower tractors. The steering mechanism is specifically designed for sway-free towing at higher road speeds.
Articulating Wagon Gears
WG1308
Double spring assisted tongue for easy lifting.
Front steering hitch is manufactured from 3/4” steel plate. The tongue is attached to the center of the hitch with a 1 1/2” CR pin. The tongue and hitch design equalizes the weight distribution on the pivot points to minimize wear and keep the steer-ing mechanism tight.
Automotive style ball joints, bronze bush-ings, and 1” plate steel on the steering arms will keep you going trouble free for thousands of miles.
The heavy-duty extendable tongue is designed and fabricated to accommodate today’s high horsepower tractors and heavy payloads.
Farmco’s revolutionary double-coupling pole design removes all stress and wear points common in traditional wagon gears.
No rotating collars to wear out.
The wide coupling design ensures straight tracking on the road.
Two ball joints allow front and rear axles to rotate independently with fluid movement. Beams do not twist. All the movement is in the joints.
“Quality wagons. Wouldn’t buy anywhere else!”
CUSTOMERS SPEAK
12
Model#
Dimension Structure Capacity
BC16WG88 16’ Main Beams 3" x 5" Cross Members 2.5" x 2.5"
8 Round Bales
BC20WG108 20’ Main Beams 3" x 5" Cross Members 2.5" x 2.5"
10 Round Bales
BC20WG1208 20’ Main Beams 3" x 5" Cross Members 2.5" x 2.5"
10 Round Bales
BC24WG1208 24’ Main Beams 3" x 5" Cross Members 2.5" x 2.5"
12 Round Bales
BC24HDWG1208 24’ x 9’ Main Beams 3" x 8" Cross Members 3" x 3"
Strap holders are standard.
18 Square Bales (3’ x 3’ x 8’)
Bale Carriers Standard Features
Farmco bale carriers accommodate both round and square bales. Adjustable cross members can be spaced to fit any bale size. Handle high moisture bales efficiently with a Farmco bale carrier.
Bale carriers are available with or without the run-ning gear.
Bale Carriers
Strap HoldersConstructed of square and rectangular steel tubing.
Accommodate any bale size with the adjustable cross members.
BC24HDWG1208 BC16WG88
Extend-able tongue for easy hookup.
Spring assisted tongue for easy lifting.
www.Farmco.ag 13
Model#
Dimension Structure Capacity
BC28HD 28’ Cross members are welded to the frame for solid construction and are not adjustable.
27 Square Bales (3' x 3' x 8')
Heavy-Duty Bale Carrier Standard Features
Farmco Bale Carriers accommodate both round and square bales. Adjustable cross members can be spaced to fit any bale size. Handle high moisture bales efficiently with a Farmco bale carrier.
Pairing the Model 1808 running gear with the BC28HD Bale Carrier allows you to efficiently haul up to 27 3’ x 3’ x 8’ square bales. The bale carrier is fabricated with 4’ x8’ x 3/8” main beams and 3” square cross members. The 4” rub rail allows you to tie down your bales for safe transportation.
Bale carriers are available with or without the run-ning gear.
Heavy-Duty Bale Carrier
BC28HDWG1808
Double spring assisted tongue for easy lifting.
Front steering hitch is manufactured from 3/4” steel plate. The tongue is attached to the center of the hitch with a 1 1/2” CR pin. The tongue and hitch design equalizes the weight distribution on the pivot points to minimize wear and keep the steer-ing mechanism tight.
Automotive style ball joints, bronze bush-ings, and 1” plate steel on the steering arms will keep you going trouble free for thousands of miles.
The heavy duty extend-able tongue is designed and fabricated to ac-commodate today’s high horsepower tractors and heavy payloads.
Tandem axle models feature a walking beam that is offset 2” toward the rear axle. Because this throws a little more weight on the rear axle, the front axle enters holes and ditches more smoothly. The offset walking beam creates greater stability and a better ride over uneven ground.
Farmco’s revolutionary double-coupling pole design removes all stress and wear points common in traditional wagon gears.
The wide coupling design ensures straight tracking on the road.
14
Model#
Dimensions Floor Frame
BW818W 8’ x 18’ Wood: 1” Oak Wood
BW818S 8’ x 18’ 2.8 lb. Expanded Steel Steel
BW818WS 8’ x 18’ Wood: 1” Oak Steel
BW822WS 8’ x 22’ Wood: 1” Oak Steel
BW918WS 9’ x 18’ Wood: 1” Oak Steel
BW922WS 9’ x 22’ Wood: 1” Oak Steel
BW822S 8’ x 22’ 2.8 lb Expanded Steel Steel
Bale Wagons Standard Features
Farmco bale wagons provide generous size, weight, and smooth handling. They have been used on farms for over 20 years. Boxes come in 8’ or 9’ widths and 18’ and 22’ lengths. All models are fabricated with an all-steel frame using 7” channel main beams and formed steel cross pieces.
Bale wagons are all steel construction with a heavy wood or steel floor frame. The uprights and top skirt are 2” square tubing with 1” square horizontal tubing welded in between.
Bale Wagons
43” side opening with easy open handle.
Rear gate swings open 270° from either side.
Expanded steel floors will outlast any wood floor.
1” oak wood flooring with 3/4” spacing for easy cleaning.
Extra deep nonskid 32” diamond plated front porch.
BW818S
www.Farmco.ag 15
Model# Bale Capacity Dimensions WeightFeeding Capacity
56H 1 Round 4.5’ or 4 Small Squares with basket insert
5’ x 6’ 910 8-10
610H 1 5’ Round or 1 Large Square 6’ x 10’ 1550 12-14
HF4832G24 1-2 Small Square Bales 4’ x 32” 210 2-4
HF832G24 3-4 Small Square Bales 8’ x 32” 325 4-6
HF848D24 1 Large Square Bale 8’ x 48” 550 4-6
HF750H 1 Large Round Bale 7 1/2’ round 2-section
350 9
Horse Feeder Standard Features
56H Standard Features
Horse Feeders
Hay basket reduces waste.
Drain holes in all four corners.
Tow ring for convenient chain hookup.
Absence of sharp corners minimizes hoof damage.
Spring loaded latch.
HF56H
HF4832G24
HF832G24
HF750H
The Model 56H feeder is designed for round bales and with the optional hay basket kit is excellent for small bales too. With the increased trough depth, hay waste is minimized resulting in savings for you. User friendly end gate allows convenient loading. Positive lock on end door ensures door will latch and stay closed. Opens easily.
Model 610H has 4 individual skid feet designed to eliminate rocking on uneven ground. 29 gauge roof standard in evergreen color. Other colors available by special order. User-friendly side-load design eliminates the need to push the bale in from the end.
The 750 round bale feeder has safe, comfortable hoops to ensure that all of the family keep their place at the table. Its two-piece construction makes moving it simple with the removal of two pins.
Studies have proven that over 30 percent of hay is wasted when not using a feeder, due to rain and hay being trampled into the ground. When considering a Farmco feeder, remember ESP—
Efficiency through improved feed intake.
Savings in feed costs from reduced waste.
Protection from parasite infestation through ground feeding.
Designed and fabricated with 12 gauge steel for long life, Farmco horse feeders are the choice of pro-fessionals. All horse feeders are coated with primer. Then a two component polyurethane paint is elec-trostatically applied to ensure that each square inch of metal has optimum rust resistance.
16
WarrantyFarmco Manufacturing warrants, to the original purchas-
er, all equipment manufactured by it to be free from defects in material and workmanship under normal use and service. Its obligation under this Warranty shall be limited to replacement or repair of any parts, provided it is within one (1) year after delivery to original Purchaser and be proven to be defective, which determination shall be made by Farmco Manufacturing. Farmco Manufacturing reserves the right to make changes in design or changes in the specifications at any time, without any obligation to owners of equipment previously purchased. This warranty is in lieu of all other warranties or agreements, whether expressed or implied. No one is authorized to alter, modify, or change the terms of this warranty.
Integrity of ManufacturingFarmco equipment is manufactured in Lancaster County, Penn-sylvania, an area rich in farming and agricultural pride. Occupa-tional farmers and hobby farmers nationwide bear testimony to the rugged build and friendly features of Farmco equipment.
Farmco has been manufacturing low maintenance, high endur-ance equipment since 1985. Decades of farmer feedback and field experience have been incorporated into the product to make them both cattle tough and farmer friendly. Heavy gauge metal, high quality welds, and strategically placed reinforce-ments mark the integrity and workmanship that is built into every piece of Farmco equipment.
All Farmco equipment is coated with primer. Then a two-com-ponent polyurethane paint is electrostatically applied to ensure that every square inch of Farmco equipment has optimum rust resistance.
Do you need a special feeder that you haven’t been able to find? Our manufacturing process allows us to build customized feed-ers and other farm equipment very quickly and efficiently. Ask us about a custom build to fit your farm.
Equipment Inventory
Farmco stocks most products year round for immediate shipment. Normal turnaround time for custom, built-to-order equipment is one to two weeks.
Cattle Tough. Farmer Friendly.
Authorized Dealer:
Articulating Running Gears
Bale Carriers
Feeders
Bale Wagons
Horse Feeders