fane - farnell element14 · for over 50 years fane have designed and manufactured high quality, ......
TRANSCRIPT
For over 50 years FANE have designed and manufactured high quality, high power component loudspeakers. FANE loudspeakers have been supplied worldwide to a customer-base which includes some of the most prestigious manufacturers of complete sound systems, and for applications covering almost every conceivable facet of sound production and reproduction.
2
As a result, FANE-manufactured loudspeakers components
have been used by the vast majority of the world’s leading
musical entertainments and have featured in systems
installed in some of the world’s most prestigious venues.
The question has often been asked – “Why does FANE
not produce its own range of integrated sound systems?”
Until now the reason has been the shortage of space and
time within a company busily attempting to satisfy a world
demand for FANE component products. Expanding capacity
has made possible the logical progression to complete
sound systems by FANE.
FANE Systems represent a major stage towards the
development of FANE into an all-embracing sound
company with the promise of advanced and innovative,
professional amplification and processing equipment to
follow. As with component audio products, the sound
system design philosophy continues to be researched – a
quest for the ultimate quality, performance, reliability and
user convenience combined with subtle and sophisticated
cosmetic design demanded by the foremost musical artists,
sound consultants and concert managements.
FANE Systems comprises the finest available range of
sound system designs, equipped with a special series
of customised FANE drive units, fine tuned by the FANE
research team to optimise every aspect of audio excellence
from this unique series of enclosure designs. The range
is manufactured in best quality birch plywood throughout
with high quality and integral hardware. Hanging/mounting
fitments are supplied and fitted as standard to ensure
that every type of venue and system location can be
accommodated.
FANE Systems represent the ultimate extended range.
Super powerful sound reproduction for every professional
application with the tonal distinction and colouration that is
a hallmark of FANE’s signature quality of performance.
3
Power Handling 250 w RMS (EIA 426A standard)500 w programme / 1000 w peak
Nominal Impedance 8 Ω (7.6 Ω minimum at 66 Hz)
Average Sensitivity 95 dB/ 2.83V/1m(average 200~16,000 Hz wideband)
Calculated Maximum SPL / 1m 119 dB continuous / 122 dB programme / 125 dB peak
Frequency Response (-6dB) 58~18500 Hz
Manufacturing Consistency +/- 3dB from 200 to 10,000 Hz
Nominal Directivity (-6dB) 80 x 60° above 1800Hz
Recommended Amplifier Up to 500 w at 8Ω (no clip) in specified frequency response
Recommended Low Cut Full range: 50 Hz 18 dB/oct ButterworthTop: 70 to 140 Hz 24 dB/oct Linkwitz-Riley
Low Frequency Driver FANE transducer 8Ω impedance8” (200 mm) diameter2” high temperature voice coil on glass fibre former
High Frequency Driver FANE Compression Driver 8Ω impedance1” (25 mm) exit, 1.34” (34 mm) voice coilTitanium diaphragm
Crossover Passive mode only3 kHz Right Phase design250V polypropylene capacitorsAir core inductors on HFAluminium housed resistors
Flying Hardware 5 M8 points with internal metal brackets4 M8 points compatible with Powerdrive Type 45 mounting accessories or equiva-lent omnimount system
Pole Mount Yes with optional adapter
Connectors 2pcs NEUTRIK Speakon NL4MP1+/1-: speaker Input2+/2-: Link
Cabinet CNC made with tongue and groove as-sembly 15 mm Russian birch plywoodexterior grade
Finish Proprietary HardTex sanded coating, black matt
Cabinet Size (HxWxD) 430 x 280 x 298 mm
Packing Carton Size (HxWxD) 494 x 344 x 352 mm
Weight 10 kg net11.5 kg gross
Optional Accessories Flight case with 100 mm wheels (for 4pcs)Abrasive resistant cover bagM8 Eye bolt kitWall mounting bracketU Mounting bracketFlying adapterCompatible with Powerdrive type 75 and Omnimount35 mm pole mount adapter
ADDITIONAL SPECIFICATIONSACOUSTIC SPECIFICATIONS
KEY FEATURES• Hi-fidelity sound without any EQ• Real 250 w RMS power handling (EIA 8 hrs Std) • Equipped with premium FANE Drivers• Elliptic 80ºx60º low resonance glass fibre horn• Multi purpose cabinet design for FOH or monitor use• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of flying hardware accessories• DSP preset support on associated electronics
SV-8 loudspeaker system is suitable for near field main PA reinforcement with subwoofer, portable system or permanent installation, wall, stand, or ceiling mountings, monitoring for vocals, delay fill or under balcony complementary diffusion.
SV-8
4
SV-8
FREQUENCY RESPONSE DATA
ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a passive, 2 way type consisting of one 8” (200mm) direct radiating reflex loaded low frequency transducer and one 1” (25mm) exit / 1.34” (34mm) voice coil HF compression driver that is mounted on a constant directivity elliptic glass fibre horn that provides a nominal coverage angle of 80° (horizontal) by 60° (vertical). The frequency response shall be 65 to 18000Hz in half space with less than ± 3dB variation. Low and high frequency sections shall be integrated by an internal 3kHz passive crossover network with Right Phase technology and 18dB/oct slopes. Power handling shall be 250W RMS, 1000W peak by EIA 426A standard (8 hours pink noise) average wideband (200-16000Hz). Efficiency on axis shall be 95dB/1W/1m and maximum SPL shall be 119B continuous / 125dB peak. Rated impedance shall be 8Ωs nominal.
The multi-angled enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing, multi position 35mm pole mount and threaded M8 inserts for wall and ceiling mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 280x430x298m and Weight 10kg.
10050 200 500 1k 2k 5k 10k 20k
FREQUENCY (Hz) MLS - 1/6th OCTAVE 4PI (free space)
dB S
PL
dB S
PL
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
120.0
130.0
140.0
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
120.0
130.0
140.0
5
Flying Hardware 10 M8 points with internal metal brackets4 M8 points compatible with Power drive Type 45 mounting accessories or equiva-lent Omnimount system
Pole Mount Multi position 35mm pot
Connectors 2pcs NEUTRIK Speakon NL4MP1+/1-: speaker Input2+/2-: Link
Cabinet CNC made with tongue and groove assembly 15 and 18 mm Russian birch plywood exterior grade
Finish Proprietary HardTex sanded coating, black matt
Cabinet Size (HxWxD) 530 x 350 x 330 mm
Packing Carton Size (HxWxD) 594 x 414 x 394 mm
Weight 13 kg net15 kg gross
Optional Accessories Flight case with 100 mm wheelsAbrasive resistant cover bagM8 Eye bolt kitWall mounting bracketU Mounting bracketFlying adapterCompatible with Powerdrive type 75 and Omnimount
Power Handling 300 w RMS (EIA 426A standard)600 w programme / 1200 w peak
Nominal Impedance 8 Ω (8.3 Ω minimum at 62Hz)
Average Sensitivity 95 dB/ 2.83V/1m (average 200~16,000 Hz wideband)
Calculated Maximum SPL / 1m 120 dB continuous / 123 dB programme / 126 dB peak
Frequency Response (-6dB) 51~18500 Hz
Manufacturing Consistency +/- 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB) 80 x 60° above 1600Hz
Recommended Amplifier Up to 600 w at 8Ω (no clip) in specified frequency response
Recommended Low Cut Full range: 50 Hz 18 dB/oct ButterworthTop: 70 to 140 Hz 24 dB/oct Linkwitz-Riley
Low Frequency Driver FANE transducer 8Ω impedance10” (250 mm) diameter 3” high temperature voice coil on glass fibre former
High Frequency Driver FANE Compression Driver 8Ω impedance1” (25 mm) exit, 1.34” (34 mm) voice coilTitanium diaphragm
Crossover Passive mode only2.6 kHz Right Phase design400V polypropylene capacitorsAir core inductors on HFAluminium housed resistors
ACOUSTIC SPECIFICATIONS
KEY FEATURES• Hi-fidelity sound without any EQ• Real 300 w RMS power handling (EIA 8 hours Standard) • Equipped with premium FANE Drivers• Elliptic 80ºx60º low resonance glass fibre horn• Multi purpose cabinet design for FOH or monitor use• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of flying hardware accessories• DSP preset support on associated electronics
SV-10 loudspeaker system is suitable for near field main PA reinforcement with subwoofer, portable system or permanent installation, wall, stand, or ceiling mountings, monitoring for vocals and instruments, delay fill or under balcony complementary diffusion.
SV-10
ADDITIONAL SPECIFICATIONS
6
ARCHITECTURAL SPECIFICATIONS
FREQUENCY RESPONSE DATA
The loudspeaker system shall be a passive, 2 way type consisting of one 10” (250mm) direct radiating reflex loaded low frequency transducer and one 1” (25mm) exit / 1.34” (34mm) voice coil HF compression driver that is mounted on a constant directivity elliptic glass fibre horn that provides a nominal coverage angle of 80° (horizontal) by 60° (vertical). The frequency response shall be 56 to 18000Hz in half space with less than ± 3dB variation. Low and high frequency sections shall be integrated by an internal 2.6kHz passive crossover network with Right Phase technology and 18dB/oct slopes. Power handling shall be 300W RMS, 1200W peak by EIA 426A standard (8 hours pink noise) average wideband (200-16000Hz). Efficiency on axis shall be 95dB/1W/1m and maximum SPL shall be 120B continuous / 126dB peak. Rated impedance shall be 8Ωs nominal.
The multi-angled enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing, multi position 35mm pole mount and threaded M8 inserts for wall and ceiling mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 350x530x330mm and Weight 13kg.
SV-10
10050 200 500 1k 2k 5k 10k 20k
FREQUENCY (Hz) MLS - 1/6th OCTAVE 4PI (free space)
dB S
PL
dB S
PL
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
120.0
130.0
140.0
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
120.0
130.0
140.0
7
Power Handling 300 w RMS (EIA 426A standard)600 w programme / 1200 w peak
Nominal Impedance 8 Ω (7.5 Ω minimum at 58 Hz)
Average Sensitivity 97 dB/ 2.83V/1m(average 200~16,000 Hz wideband)
Calculated Maximum SPL / 1m 122 dB continuous / 125 dB programme / 128 dB peak
Frequency Response (-6dB) 50~19000 Hz
Manufacturing Consistency +/- 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB) 80 x 60° above 1500Hz
Recommended Amplifier Up to 600 w at 8Ω (no clip) in specified frequency response
Recommended Low Cut Full range: 45 Hz 18 dB/oct ButterworthTop: 60 to 140 Hz 24 dB/oct Linkwitz-Riley
Low Frequency Driver FANE transducer 8Ω impedance12” (300 mm) diameter 2.5” high temperature voice coil on glass fibre former
High Frequency Driver 1” (25 mm) exit, 1.7” (44 mm) voice coilHeat treated Titanium diaphragm
Crossover Passive mode only2,2k Hz Right Phase design400V polypropylene capacitorsAir core inductors on HFAluminium housed resistors
Flying Hardware 12 M8 points with internal metal brackets
Pole Mount Multi position 35 mm pot
Connectors 2pcs NEUTRIK Speakon NL4MP1+/1-: speaker Input2+/2-: Link
Cabinet CNC made with tongue and groove assembly 15 and 18 mm Russian birch plywood exterior grade
Finish Proprietary HardTex sanded coating, black matt
Cabinet Size (HxWxD) 590 x 380 x 360 mm
Packing Carton Size (HxWxD) 654 x 444 x 424 mm
Weight 20 kg net23 kg gross
Optional Accessories Flight case with 100 mm wheelsAbrasive resistant cover bagM8 Eye bolt kitWall mounting bracketU Mounting bracketFlying adapter
ADDITIONAL SPECIFICATIONSACOUSTIC SPECIFICATIONS
KEY FEATURES• Hi-fidelity sound without any EQ• Real 300 w RMS power handling (EIA 8 hours Standard) • Equipped with famous FANE Drivers• Elliptic 80ºx60º low resonance glass fibre horn• Multi purpose cabinet design for FOH or monitor use• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of flying hardware accessories• DSP preset support on associated electronics
SV-12 loudspeaker system is suitable for near field main PA reinforcement with or without subwoofer, portable system or permanent installation, wall, stand, or ceiling mountings, monitoring for vocals and instruments, side fill in small stages, delay fill or under balcony complementary diffusion.
SV-12
8
ARCHITECTURAL SPECIFICATIONS
FREQUENCY RESPONSE DATA
SV-12
The loudspeaker system shall be a passive, 2 way type consisting of one 12” (300mm) direct radiating reflex loaded low frequency transducer and one 1” (25mm) exit / 1.7” (44mm) voice coil HF compression driver that is mounted on a constant directivity elliptic glass fibre horn that provides a nominal coverage angle of 80° (horizontal) by 60° (vertical). The frequency response shall be 56 to 18500Hz in half space with less than ± 3dB variation. Low and high frequency sections shall be integrated by an internal 2.2kHz passive crossover network with Right Phase technology and 18dB/oct slopes. Power handling shall be 300W RMS, 1200W peak by EIA 426A standard (8 hours pink noise) average wideband (200-16000Hz). Efficiency on axis shall be 97dB/1W/1m and maximum SPL shall be 122dB continuous / 128dB peak. Rated impedance shall be 8Ωs nominal.
The multi-angled enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing, multi position 35mm pole mount and threaded M8 inserts for wall and ceiling mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer UltraTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 380x590x360mm and Weight 20kg.
10050 200 500 1k 2k 5k 10k 20k
FREQUENCY (Hz) MLS - 1/6th OCTAVE 4PI (free space)
dB S
PL
dB S
PL
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
120.0
130.0
140.0
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
120.0
130.0
140.0
9
Power Handling 600 w RMS (EIA 426A standard)1200 w programme / 1800 w peak
Nominal Impedance 8 Ω (7.5 Ω minimum at 51Hz)
Average Sensitivity 98 dB/ 2.83V/1m(average 200~16,000 Hz wideband)
Calculated Maximum SPL / 1m 126 dB continuous / 129 dB programme / 132 dB peak
Frequency Response (-6dB) 48~19000 Hz
Manufacturing Consistency +/- 3dB from 200 to 10,000 Hz
Nominal Directivity (-6dB) 80 x 60° above 1500 Hz
Recommended Amplifier Up to 1200 w at 8Ω (no clip) in specified frequency response
Recommended Low Cut Full range: 40 Hz 18 dB/oct ButterworthTop: 60 to 140 Hz 24 dB/oct Linkwitz-Riley
Low Frequency Driver FANE transducer, 8 Ω impedance15” (380 mm) diameter 3” high temperature voice coil on glass fibre former
High Frequency Driver 1” (25 mm) exit, 1.7” (44 mm) voice coilHeat treated Titanium diaphragm
Crossover Passive mode only2 kHz Right Phase design400V polypropylene capacitorsAir core inductors on HFAluminium housed resistors
Flying Hardware 12 M8 points with internal metal brackets
Pole Mount Multi position 35 mm pot
Connectors 2pcs NEUTRIK Speakon NL4MP1+/1-: speaker Input2+/2-: Link
Cabinet CNC made with tongue and groove assembly 18 mm Russian birch plywoodexterior grade
Finish Proprietary HardTex sanded coating, black matt
Cabinet Size (HxWxD) 708 x 442 x 446 mm
Packing Carton Size (HxWxD) 772 x 506 x 510 mm
Weight 28 kg net31 kg gross
Optional Accessories Flight case with 100 mm wheelsAbrasive resistant cover bagM8 Eye bolt kitWall mounting bracketU Mounting bracketFlying adapter
ACOUSTIC SPECIFICATIONS ADDITIONAL SPECIFICATIONS
KEY FEATURES• Hi-fidelity sound without any EQ• Real 600 w RMS power handling (EIA 8 hours Standard) • Equipped with famous FANE Drivers• Elliptic 80ºx60º low resonance glass fibre horn• Multi purpose cabinet design for FOH or monitor use• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of flying hardware accessories• DSP preset support on associated electronics
SV-15 loudspeaker system is suitable for near field main PA reinforcement with or without subwoofer, portable system or permanent installation, wall, stand, or ceiling mountings, monitoring for vocals and instruments, side fill in small stages, delay fill or under balcony complementary diffusion.
SV-15
10
ARCHITECTURAL SPECIFICATIONS
FREQUENCY RESPONSE DATA
The loudspeaker system shall be a passive, 2 way type consisting of one 15” (380mm) direct radiating reflex loaded low frequency transducer and one 1” (25mm) exit / 1.7” (44mm) voice coil HF compression driver that is mounted on a constant directivity elliptic glass fibre horn that provides a nominal coverage angle of 80° (horizontal) by 60° (vertical). The frequency response shall be 54 to 18500Hz in half space with less than ± 3dB variation. Low and high frequency sections shall be integrated by an internal 2kHz passive crossover network with Right Phase technology and 18dB/oct slopes. Power handling shall be 600W RMS, 1800W peak by EIA 426A standard (8 hours pink noise) average wideband (200-16000Hz). Efficiency on axis shall be 98dB/1W/1m and maximum SPL shall be 122dB continuous / 128dB peak. Rated impedance shall be 8Ωs nominal.
The multi-angled enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing, multi position 35mm pole mount and threaded M8 inserts for wall and ceiling mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 442x708x446mm and Weight 28kg.
SV-15
dB S
PL
dB S
PL
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
120.0
130.0
140.0
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
120.0
130.0
140.0
10050 200 500 1k 2k 5k 10k 20k
FREQUENCY (Hz) MLS - 1/6th OCTAVE 4PI (free space)
11
Flying Hardware 8 M8 points with internal metal brackets
Pole Mount 35 mm metal
Connectors 2pcs NEUTRIK Speakon NL4MP1+/1-: speaker Input2+/2-: Link
Cabinet CNC made with tongue and groove assembly 18 mm Russian birch plywoodexterior grade
Finish Proprietary HardTex sanded coating, black matt
Cabinet Size (HxWxD) 545 x 505 x 605 mm
Packing Carton Size (HxWxD) 609 x 569 x 669 mm
Weight 34 kg net38 kg gross
Optional Accessories Flight case with 100 mm wheelsAbrasive resistant cover bagM8 Eye bolt kitAdjustable coupling bar
Power Handling 600 w RMS (EIA 426A standard)1200 w programme / 1800 w peak
Nominal Impedance 8 Ω (8.8 Ω minimum at 46 Hz)
Average Sensitivity 97 dB/ 2.83V/1m(average 50~1,000 Hz wideband)
Calculated Maximum SPL / 1m 125 dB continuous / 128 dB programme / 131 dB peak
Frequency Response (-6dB) 39~2500 Hz
Manufacturing Consistency +/- 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB) Omnidirectional (cardoid presets available on FANE DSP amplifiers)
Recommended Amplifier Up to 1200 w at 8Ω (no clip) in specified frequency response
Recommended Crossover Low pass: 80 to 150 Hz 24 dB/oct Linkwitz-RileyHigh pass: 35 Hz 18 dB/oct Butterworth
Low Frequency Driver Fane Transducer, 8 Ω impedance15” (380 mm) diameter 3” high temperature voice coil on glass fibre former
Crossover No, active usage onlyFANE DSP recommended
ACOUSTIC SPECIFICATIONS ADDITIONAL SPECIFICATIONS
KEY FEATURES• High performance compact subwoofer• Real 600W RMS power handling (EIA 8 hours Standard) • Equipped with famous FANE long excursion Driver• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of hardware accessories• DSP preset support on associated electronics
SV-115S subwoofer system is suitable for bass reinforcement for main PA systems, touring or permanent installations in small to medium stages, indoor or outdoor live performances, arenas, night clubs, houses of worship, auditoriums and theatres.
SV-115 S
12
ARCHITECTURAL SPECIFICATIONS
The subwoofer system shall be active, consisting of one 15” (380mm) direct radiating reflex loaded low frequency transducer with high excursion ability. The frequency response shall be 44 to 2000Hz in half space with less than ± 3dB variation. Power handling shall be 600W RMS, 1800W peak by EIA 426A standard (8 hours pink noise) average wideband (50-1000Hz). Efficiency on axis shall be 97dB/1W/1m and maximum SPL shall be 125dB continuous / 131dB peak. Rated impedance shall be 8Ωs nominal.
The stackable enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing, metal 35mm pole mount and threaded M8 inserts for ceiling
mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 505x545x605mm and Weight 29kg.
SV-115 S
13
Power Handling 1000 w RMS (EIA 426A standard)2000 w programme / 4000 w peak
Nominal Impedance 4 Ω (3.7 Ω minimum at 47Hz)
Average Sensitivity 100 dB/ 2.83V/1m (average 200~16,000Hz wideband)
Calculated Maximum SPL / 1m 130 dB continuous / 133 dB programme / 136 dB peak
Frequency Response (-6dB) 46~19000 Hz
Manufacturing Consistency +/- 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB) 60 x 40° above 1500 Hz
Recommended Amplifier Up to 2000w at 4Ω (no clip) in specified frequency response
Recommended Low Cut Full range: 30 Hz 18 dB/oct ButterworthTop: 55 - 125 Hz 24 dB/oct Linkwitz-Riley
Low Frequency Driver 2x FANE transducers 8Ω impedance15” (380 mm) diameter chassis3” high temperature voice coil on glass fibre former
High Frequency Driver 1” (25 mm) exit. 1.7” (44 mm) voice coilHeat treated Titanium diaphragm
Crossover Passive mode only2 kHz Right Phase design400V polypropylene capacitorsAir core inductors on HFAluminium housed resistors
ACOUSTIC SPECIFICATIONS ADDITIONAL SPECIFICATIONS
Flying Hardware 8 M8 points with internal metal brackets
Pole Mount Not available
Connectors 2pcs NEUTRIK Speakon NL4MP1+/1-: speaker Input2+/2-: Link
Cabinet CNC made with tongue and groove assembly 18 mm Russian birch plywood exterior grade
Finish Proprietary HardTex sanded coating, black matt
Cabinet Size (HxWxD) 1125 x 442 x 468 mm
Packing Carton Size (HxWxD) 1179 x 496 x 522 mm
Weight 52 kg net57 kg gross
Optional Accessories Abrasive resistant cover bagM8 Eye bolt kit
KEY FEATURES• Hi-fidelity sound without any EQ• Real 1000w RMS power handling (EIA 8 hours Standard)• Equipped with famous FANE Drivers• Elliptic 60ºx40º low resonnance glass fibre horn• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of flying hardware accessories• DSP preset support on associated electronics
SV-152 loudspeaker system is suitable for near field main PA reinforcement with or without subwoofer, portable system or permanent installation, monitoring for drums, sidefill in small stages or delay fill complementary diffusion.
SV-152
14
ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a passive, 2 way type consisting of two 15” (380 mm) direct radiating reflex loaded low frequency transducer and one 1” (25 mm) exit / 1.7” (44 mm) voice coil HF compression driver that is mounted on a constant directivity elliptic glass fibre horn that provides a nominal coverage angle of 60°(horizontal) by 40° (vertical). The frequency response shall be 52 to 18500Hz in half space with less than ± 3dB variation. Low and high frequency sections shall be integrated by an internal 2kHz passive crossover network with RightPhase technology and 18dB/oct slopes. Power handling shall be 1000w RMS, 4000w peak by EIA 426A standard (8 hours pink noise). Average wideband (200-16000Hz) efficiency on axis shall be 100dB/1W/1m and maximum SPL shall be
130dB continuous / 136dB peak. Rated impedance shall be 4 ohms nominal.
The enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing and threaded M8 inserts for ceiling mounting. The screws shall be Stainless Steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black mat multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black mat dual layer coated (powder + acrilyc) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (HxWxD) 1125x442x468mm and Weight 52kg.
SV-152
FREQUENCY RESPONSE DATA
10050 200 500 1k 2k 5k 10k 20k
dB S
PL
dB S
PL
FREQUENCY (Hz) MLS - 1/6th OCTAVE 4PI (free space)
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
120.0
130.0
140.0
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
120.0
130.0
140.0
15
Power Handling 800 w RMS (EIA 426A standard)1600 w programme / 2400 w peak
Nominal Impedance 8 Ω (8.8 Ω minimum at 34 Hz)
Average Sensitivity 99 dB/ 2.83V/1m(average 50~1,000 Hz wideband)
Calculated Maximum SPL / 1m 128 dB continuous / 131 dB programme / 134 dB peak
Frequency Response (-6dB) 30~1300 Hz
Manufacturing Consistency +/- 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB) Omnidirectional (cardoid presets available on FANE DSP amplifiers)
Recommended Amplifier Up to 1600 w at 8Ω (no clip) in specified frequency response
Recommended Crossover Low pass: 70 to 125 Hz 24 dB/oct Linkwitz-RileyHigh pass: 30 Hz 18 dB/oct Butterworth
Low Frequency Driver Fane Transducer, 8 Ω impedance18” (460 mm) diameter 4” high temperature voice coil on glass fibre former
Crossover No, active usage onlyFANE DSP recommended
Flying Hardware 8 M8 points with internal metal brackets
Pole Mount 35 mm metal
Connectors 2pcs NEUTRIK Speakon NL4MP1+/1-: speaker Input2+/2-: Link
Cabinet CNC made with tongue and groove assembly 18 mm and 24 mm Russian birch plywoodexterior grade
Finish Proprietary HardTex sanded coating, black matt
Cabinet Size (HxWxD) 600 x 561 x 705 mm
Packing Carton Size (HxWxD) 664 x 625 x 769 mm
Weight 45 kg net50 kg gross
Optional Accessories Flight case with 100 mm wheelsAbrasive resistant cover bagM8 Eye bolt kitAdjustable coupling bar
ADDITIONAL SPECIFICATIONSACOUSTIC SPECIFICATIONS
KEY FEATURES• High performance compact subwoofer• 30Hz usable frequency• Real 800 w RMS power handling (EIA 8 hours Standard) • Equipped with famous FANE long excursion Driver• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of hardware accessories• DSP preset support on associated electronics
SV-118S subwoofer system is suitable for bass reinforcement for main PA systems, touring or permanent installations in small to medium stages, indoor or outdoor live performances, arenas, night clubs, houses of worship, auditoriums and theatres.
SV-118 S
16
ARCHITECTURAL SPECIFICATIONS
The subwoofer system shall be active, consisting of one 18” (460mm) direct radiating reflex loaded low frequency transducer with high excursion ability. The frequency response shall be 35 to 1300Hz in half space with less than ± 3dB variation. Power handling shall be 800W RMS, 2400W peak by EIA 426A standard (8 hours pink noise) average wideband (50-1000Hz). Efficiency on axis shall be 99dB/1W/1m and maximum SPL shall be 128dB continuous / 134dB peak. Rated impedance shall be 8Ωs nominal.
The stackable enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing,
metal 35mm pole mount and threaded M8 inserts for ceiling mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 561x600x705mm and Weight 45kg.
SV-118 S
17
Power Handling 1200 w RMS (EIA 426A standard)2400 w programme / 4800 w peak
Nominal Impedance 4 Ω (4.4 Ω minimum at 46Hz)
Average Sensitivity 100 dB/ 2.83V/1m(average 50~1,000 Hz wideband)
Calculated Maximum SPL / 1m 131 dB continuous / 134 dB programme / 137 dB peak
Frequency Response (-6dB) 39~2500 Hz
Manufacturing Consistency +/- 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB) Omnidirectional (cardoid presets available on FANE DSP amplifiers)
Recommended Amplifier Up to 2400 w at 4Ω (no clip) in specified frequency response
Recommended Crossover Low pass: 80 to 150 Hz 24 dB/oct Linkwitz-RileyHigh pass: 35 Hz 18 dB/oct Butterworth
Low Frequency Driver 2x FANE transducers 8Ω impedance15” (380 mm) diameter3” high temperature voice coil on glass fibre former
Crossover No, active usage onlyFANE DSP recommended
ACOUSTIC SPECIFICATIONS ADDITIONAL SPECIFICATIONS
Flying Hardware Not Available
Pole Mount 35 mm metal
Connectors 2pcs NEUTRIK Speakon NL4MP1+/1-: speaker Input2+/2-: Link
Cabinet CNC made with tongue and groove assembly 18 mm Russian birch plywoodexterior grade
Finish Proprietary HardTex sanded coating, black matt
Cabinet Size (HxWxD) 480 x 960 x 686 mm
Packing Carton Size (HxWxD) 1024 x 544 x 750 mm
Weight 55 kg net59 kg gross
Optional Accessories Flight case with 100 mm wheelsAbrasive resistant cover bagM8 Eye bolt kitAdjustable coupling bar
KEY FEATURES• High performance compact subwoofer• Real 1200 w RMS power handling (EIA 8 hours Standard) • Equipped with premium FANE long excursion Driver• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of hardware accessories• DSP preset support on associated electronics
SV-215S subwoofer system is suitable for bass reinforcement for main PA systems, touring or permanent installations in small to medium stages, indoor or outdoor live performances, arenas, night clubs, houses of worship, auditoriums and theatres .
SV-215 S
18
The subwoofer system shall be active, consisting of two 15” (380mm) direct radiating reflex loaded low frequency transducer with high excursion ability. The frequency response shall be 44 to 2000Hz in half space with less than ± 3dB variation. Power handling shall be 1200W RMS, 4800W peak by EIA 426A standard (8 hours pink noise) average wideband (50-1000Hz). Efficiency on axis shall be 100dB/1W/1m and maximum SPL shall be 131dB continuous / 137dB peak. Rated impedance shall be 4Ωs nominal.
The stackable enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing, metal 35mm pole mount and threaded M8 inserts for ceiling
mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.8 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 960x480x686mm and Weight 55kg.
SV-215 S
ARCHITECTURAL SPECIFICATIONS
19
Power Handling 1600 w RMS (EIA 426A standard)3200 w programme / 6400 w peak
Nominal Impedance 4 Ω (4.5 Ω minimum at 35 Hz)
Average Sensitivity 102 dB/ 2.83 V/1m (average 50~1,000 Hz wideband)
Calculated Maximum SPL / 1m 134 dB continuous / 137 dB programme / 140 dB peak
Frequency Response (-6dB) 32~1300 Hz
Manufacturing Consistency +/- 3dB from 100 to 1,000 Hz
Nominal Directivity (-6dB) Omnidirectional (cardoid presets available on FANE DSP amplifiers)
Recommended Amplifier Up to 3200 w at 4Ω (no clip) in specified frequency response
Recommended Crossover Low pass: 70 to 125 Hz 24 dB/oct Linkwitz-RileyHigh pass: 30 Hz 18 dB/oct Butterworth
Low Frequency Driver 2x FANE transducers 8Ω impedance18” (460 mm) diameter4” high temperature voice coil on glass fibre former
Crossover No, active usage onlyFANE DSP recommended
ACOUSTIC SPECIFICATIONS ADDITIONAL SPECIFICATIONS
Flying Hardware Not Available
Pole Mount 35 mm metal
Connectors 2pcs NEUTRIK Speakon NL4MP1+/1-: speaker Input2+/2-: Link
Cabinet CNC made with tongue and groove assembly 18 mm and 24 mm Russian birch plywood exterior grade
Finish Proprietary HardTex sanded coating, black matt
Cabinet Size (HxWxD) 561 x 1060 x 768 mm
Packing Carton Size (HxWxD) 625 x 1124 x 832 mm
Weight 85 kg net91 kg gross
Optional Accessories Flight case with 100 mm wheelsAbrasive resistant cover bagM8 Eye bolt kitAdjustable coupling bar
KEY FEATURES• High performance compact subwoofer• 30 Hz usable frequency• Real 1600 w RMS power handling (EIA 8 hours Standard) • Equipped with famous FANE long excursion Driver• Rock solid void-free birch plywood cabinet• Touring grade HardTex coating with sanded black matt finish• Complete line of hardware accessories• DSP preset support on associated electronics
SV-218S subwoofer system is suitable for bass reinforcement for main PA systems, touring or permanent installations in medium to large stages, indoor or outdoor live performances, arenas, stadiums, night clubs, houses of worship, auditoriums and theatres.
SV-218 S
20
ARCHITECTURAL SPECIFICATIONS
The subwoofer system shall be active, consisting of two 18” (460mm) direct radiating reflex loaded low frequency transducer with high excursion ability. The frequency response shall be 36 to 1300Hz in half space with less than ± 3dB variation. Power handling shall be 1600W RMS, 6400W peak by EIA 426A standard (8 hours pink noise) average wideband (50-1000Hz). Efficiency on axis shall be 102dB/1W/1m and maximum SPL shall be 134dB continuous / 140dB peak. Rated impedance shall be 4Ωs nominal.
The stackable enclosure shall be of a void free multi-laminate Russian birch ply construction with sealed internal bracing, metal 35mm pole mount and threaded M8 inserts for ceiling
mounting. The screws shall be stainless steel 316L with 200 hours coating per ASTM-B117. The finish shall be a black matt multi layer HardTex water based painting with hardness higher than 75Hv. The front of the enclosure shall be protected by a black matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically transparent grille. Dimensions shall be (WxHxD) 561x1060x768mm and Weight 85kg.
SV-218 S
Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are correct at the time of print. © 2011, Fane International Ltd.
FANE INTERNATIONAL LTD.Sovereign HouseGilcar WayWakefield EuroportCastleford WF10 5QSUnited Kingdom
Tel: +44 (0)1924 224618Fax: +44 (0)1924 899166Email: [email protected]