falcon price book 2011

Price Book 2011Effective January 31, 2011

For a list of available BAA/ARRA compliant products please contact your local SSC or sales representative to see the Ingersoll Rand Security Technologies BAA/ARRA catalog.

Price Book 108Effective January 31, 2011 • Rev. 1/11

i

General Terms and Conditions of Sale and Service

INGERSOLL-RAND COMPANY, SECURITY TECHNOLOGIES SECTOR, GENERAL TERMS AND CONDITIONS OF SALE AND SERVICE

1. GENERAL. (a) This Agreement contains the terms and conditions by which Company will quoteand sell its Products and Services to Customer. (b) The terms “purchase order” or “order” for the purposes of this Agreement include the term “request for quotation,” as appropriate. (c) This Agreement supersedes all pre-printed and boilerplate terms and conditions set forth in any purchaseorder issued by Customer. (d) No reference herein to Customer’s purchase order will in any way incorporate different or additional terms and conditions which are hereby objected to. (e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER’S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT. (f) Inthe event of a conflict between this Agreement and a purchase order issued by Customer, the terms of thisAgreement will prevail. In the event of a conflict between this Agreement and any specific Product orService terms and conditions, the specific Product or Service terms and conditions will prevail.

2. SCOPE OF PRODUCTS AND SERVICES AND ORDERS.(a) Scope of Products and Services. The scope of the Products and Services (including, but not limited to location) are (i) attached to this Agreement, (ii) separately furnished by Company to Customer, or (iii) subject to Section 1 herein, contained in an order submitted by Customer. Non-standard finishes and special items may be available. Contact Company for such availability. All Products that come in “kits” cannot be sold as individual pieces. See the specific product terms and conditions for exceptions. (b) Orders.All orders submitted by Customer must be in written formacceptable to Company. (c) Receipt of an Order. Company will acknowledge receipt of each order issued in accordance with this Agreement and will notify Customer whether such order has been accepted or rejected, in whole or in part, by Company. If Company fails to acknowledge receipt of anorder, within a reasonable time period, such failure to acknowledge receipt will be deemed a rejection ofthe entire order. (d) Changes to Orders or Cancellation of Orders. Change order request and Cancellations can be by phone, fax, or email. Changes and Cancellations are allowed without penalty ifmade within 48 hours of order receipt if the order has not shipped. Some exceptions do apply - pleaseconsult the factory. After 48 hours, all changes or cancellations are subject to a charge of 25% of the netproduct or service value plus the cost of any fabrication or raw materials that have been purchased for theorder. Unless otherwise specified by Company in writing, any changes to orders acknowledged byCompany that affect the delivery date will be deemed a new order and will require acknowledgement byCompany as provided in this Section 2. The Customer cannot change or cancel credential orders andbiometrics orders once they have been placed. If a change or cancel must occur, then the Customer willpay a penalty to change credential and biometrics orders.

3. PRICES AND PAYMENT. (a) Prices. The prices specified by Company are subject to change,without notice, to Company’s prices in effect at the time of each shipment of Products or performance ofServices. Additional charges may be applied for product modification or engineering services. Oral pricesspecified by Company are null and void. (b) Invoices. Company will submit invoices to Customer stating amounts due. (c) Payment Terms. Payment terms are 2% cash discount 20 days, net35 days from date of invoice. Payment will be made in United States dollars. (d) Credit Terms. All orders are subject to Company’s credit limit and terms of credit required by Company or contained inCompany’s credit application, which is subject to change by Company at any time either before or afterdelivery of any part of the order. Company reserves the right to request payment in advance of shipmentor any order or to request adequate assurances for Customer’s payment of an order and may withhold orstop shipment, without any liability to Company, until Customer submits payment or assurance of payment, as required by Company. (e) Default. If Customer is in default in payment or otherwise withrespect to any order for Products or Services or any other contract with Company, Company shall havethe right, in addition to all other legal remedies and without prejudice to any of its right hereunder, todefer further shipments until such default is corrected and to declare all outstanding bills of Customer tobe immediately due and payable. (f) Taxes.Any taxes, charges, or duties imposed by any governmentalauthority on the sale of Products or Services will be paid by Customer, in addition to the selling pricespecified by Company. (g) Late Payment Charge.A late payment charge of 1.5% per month equivalent to 18% per annum will be charged on past due balances owed Company. Provided however,that in the event that applicable governmental law sets a maximum rate for late payment fees which isless than 18% per annum, then the late payment charge assessed will be set at the maximum rate permitted by law.

4. INSPECTION, DELIVERY, SHIPPING, FREIGHT CHARGES, CLAIMS, AND PACKING.(a) Inspection. Inspection of Products and Services will be done by Customer immediately after receiptof Products or completion of Services. Inspection of Products or Services by Customer at Company'sfacility is not permitted. (b) Delivery. Product delivery schedules are based upon current production capacities, material or component availability, and inventory, and may be changed by Company as conditions require. Service delivery schedules are based upon prompt receipt of, and prompt access to,Customer’s equipment and all information necessary to complete the Services. In no event will Productor Service delivery dates be construed as falling within the meaning of “time is of the essence.” Partialdelivery shall be accepted by Customer and paid for at the price and on the terms stated herein. Any partial delivery of Products or Services, shall constitute a separate sale and payment shall be separatelymade when due. If any part of the Products or Services are not delivered by Company in accordance withCustomer’s order, this Agreement shall not be affected thereby. (c) Shipping. Unless otherwise specifiedby Company, (i) where the Customer is located in the United States, all Products will be sold “UniformCommercial Code, F.O.B. Origin, Company's factory”; and (ii) where the Customer is located outside of the United States, all Products will be sold “ Ex-works, Company's factory (Incoterms 2000).” In either instance, title and risk of loss will pass to Customer upon delivery to thecarrier at Company's factory. Provided however, a security interest will remain in the Products, regardless of mode of attachment to realty or other property, until full payment has been made therefore,and Customer agrees, upon request, to do all things and acts necessary to protect Company’s interest byadequately insuring the Products against loss from damage from any cause and to have Company namedas an additional insured. Copies of all Certificates of Insurance will be provided to Company uponrequest. Customer will also assist Company in providing all necessary documents or signatures required to file any documents to perfect Company’s interest in such Products. (d) Freight Charges. Thefull cost of freight, via a carrier of our choice, will be allowed (and prepaid) on shipments of the netdollar amount or more indicated in the chart below within the United States of America, excluding all territories.

Brand Net Dollar Amount

Schlage Mechanical $7,000

Schlage Electronic Security (excluding Biometricsand Software & Controllers) $7,000

Schlage Biometrics Freight Charges Apply

Schlage Software & Controllers Freight Charges Apply

Von Duprin $7,000

LCN $7,000

IR FASTRACK $7,000

Falcon Locks $5,000

Falcon Exits $5,000

Falcon Closers $5,000

Falcon FASTRACK $5,000

Ives & Glynn-Johnson $1,000

Steelcraft Refer to separate freight terms

On shipments of the net dollar amount or more to all foreign countries and US territories, freight will be allowed (and prepaid) to the Port of Embarkation. Shipments under the net dollar amount will be prepaidby Ingersoll Rand and 3.0% of the net invoice amount or $10, whichever is greater, will be added to theinvoice. All expedited methods of shipment, such as 'next day air', will be prepaid by Ingersoll Rand butthe entire shipping costs will be added to the invoice. Ingersoll Rand will ship as requested, freight collect, if the customer is willing to bear the entire expense and so indicates on the order. Once receivedby IR, a purchase order cannot be combined with another purchase order to qualify for freight allowed.In addition the customer may not combine any of the brands or product categories listed above on a single purchase order to qualify for freight allowed, except in the case of FASTRACK. IR FASTRACKmay not be combined with Falcon FASTRACK to qualify for freight allowed. (e) Claims. All claims forloss or damage to Products while in the care, custody, and/or control of a carrier will be the responsibilityof Customer, who will submit any claims. (f) Packing. Company will pack, mark, and ship the Productsaccording to its standard procedures for shipment, unless the parties agree, in writing, that Company willcomply with any special instructions provided by Customer. Compliance with special instructions may result in an increased price.

5. CLAIMS. Claims due to shortages, errors, omissions, damaged goods, or defective material must besubmitted within 30 days from the date of the invoice.

6. PRODUCT CHANGES. Company reserves the right to change without notice the design of, or theprocess of manufacturing, the Products covered by this Agreement; provided that the foregoing will notbe construed as relieving Company from its obligation to deliver Products which conform to the specifications which Company may have furnished to Customer.

7. PRODUCT RETURNS. Purchased material can only be returned to the factory by obtaining ReturnMaterial Authorization (RMA) and must be returned to Company within 90 days of issuance of theRMA. Returned material must be new, unused, non-obsolete, and non-specially manufactured and beenin Customer’s inventory no more than 180 days from the date of shipment by Company. The RMAnumber, the original invoice number, and the reason for the return must be included in the return. If thecompany approves the return, a credit will be issued to the Customer’s account less freight and ahandling charge of 35% of the net material on the original invoice. Handling charges may vary depending on the condition of the return. The amount of final credit will be determined upon receipt atthe factory and analyzing the condition of the material. Factory retains the right to deny credit toanyone for any reason.

8. TECHNICAL INFORMATION AND ADVICE. (a) All designs, data, and specifications provided by Company are proprietary and will not be disclosed or reused by Customer without the priorwritten consent of Company. (b) Company assumes no obligation or liability for any advice given byCompany, the results obtained, or damages incurred, and all such advice is given and accepted at Customer’s risk.

9. INTELLECTUAL PROPERTY OWNERSHIP.

Nothing herein is a grant or license or right under any specific patent or intellectual property asset of ither party. With regard to intellectual property ownership, all intellectual property and related intellectual property rights (hereinafter “IP”) owned by one party before the date of this Agreement willremain owned by that party. All IP conceived, developed, or reduced to practice as part of thisAgreement after the date and during the term of this Agreement shall be owned by the party creating the intellectual property if created by one party without the benefit of the other party’s IP. All IP createdjointly will be owned by the parties jointly, in direct proportion to monetary contribution. The party that has a majority interest shall manage the jointly owned IP. Neither party shall disclose any of theother party’s IP to a third party without prior written consent. All intellectual property and related documents which are confidential shall remain subject to the terms and conditions of this Agreement for twenty (20) years from its effective date, unless such information is made public before this time expires.

10. LIMITED WARRANTY.

(a) Company's Standard Limited Warranty(ies) relating to Products or Services are applicable to thisAgreement. The limited warranty(ies) are (i) attached to this Agreement; (ii) separately identified in the specific Product Price Book; or (iii) separately furnished by Company to Customer.

(b) (i) In the event that certain Product warranties are not attached to this Agreement or separately furnished, Company warrants only to Customer that Products will be free from defects in material andworkmanship for a period of 12 months from the date of shipment of the Products. CO-Series locks,AD-Series locks, AD-Series Reader Modules, WPR400, WRI400, WSM400 TK400, CT5000,PIM400, PIM401, PIB300, and PIB301 will be warranted for a period of 12 months from the dateof installation, not to exceed 24 months from the date of shipment from the factory. Company’ssole obligation under this warranty is limited to repairing or replacing, at its option, the defectiveProducts. (ii) The provisions of this limited Product warranty do not apply to Products: (A) usedfor the purposes for which they are not designed or intended;

11-1/1

Price Book 108Effective January 31, 2011 • Rev. 1/11ii

General Terms and Conditions of Sale and Service

(B) which have been repaired or altered without Company's prior written consent; (C) whichhave been subjected to misuse, abuse, negligence, or accident; (D) which have been improperlystored, installed, maintained, or operated; (E) which have been used in violation of writteninstructions provided by Company to Customer; (F) which have subjected to impropertemperature, humidity, or other environmental conditions; (G) which have been affected bynormal wear and tear; or (H) which, based on Company's examination, do not disclose toCompany's satisfaction nonconformance to the warranty.

(c) (i) In the event that certain Service warranties are not attached to this Agreement or separatelyfurnished, Company warrants only to Customer that the Services will be free from defects in material and workmanship for a period of 6 months from the date of completion of the particularitems of Service.Company’s sole obligation under this warranty is limited to repairing or replacing, atits option, the defective Products. (ii) The provisions of this limited Product warranty do not apply toProducts: (A) used for the purposes for which they are not designed or intended; (B) which have beenrepaired or altered without Company's prior written consent; (C) which have been subjected to misuse,abuse, negligence, or accident; (D) which have been improperly stored, installed, maintained, or operated; (E) which have been used in violation of written instructions provided by Company to Customer; (F) which have subjected to improper temperature, humidity, or other environmental conditions; (G) which have been affected by normal wear and tear; or (H) which, based on Company'sexamination, do not disclose to Company's satisfaction nonconformance to the warranty.(c) (i) In the event that certain Service warranties are not attached to this Agreement or separately furnished, Company warrants only to Customer that the Services will be free from defects in materialand workmanship for a period of 6 months from the date of completion of the particular items of Service. Company’s sole obligation under this warranty is limited to repairing or reperformance, at itsoption, of the Service; provided however, if repair or reperformance is either impractical or impossible,the Company will refund to Customer that portion of the price paid to the Company for the defectiveitem of Service. This warranty only applies if the company is given written notice of the defect or nonconformance by the Customer within 30 days of discovery. (ii) The provisions of this limited Service warranty does not apply to any defects or issues with the design or performance of equipmentor products not manufactured by Company, nor does it apply to any code compliance or permit requirements for the assembly, installation, erection, or construction of any goods.

(d) NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TOTHE PRODUCTS OR SERVICES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIEDWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

(e) The following costs and expenses are not covered by the provisions of these limited warranties: (i) labor costs for the removal and reinstallation of Products or other manufacturer’s products; (ii) shipping and freight expenses required to return Products to Company; (iii) normal maintenance;and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anythingother than defects in Company’s material (products only) or workmanship.

11. CUSTOMER'S REMEDIES. THE CUSTOMER'S EXCLUSIVE AND SOLE REMEDYON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF PRODUCTS OR SERVICES THAT DO NOT CONFORM TO THIS AGREEMENT WILL BE TO (A) SECUREREPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR ORREPERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICEPAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENTWILL THE COMPANY'S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FORTHE PRODUCTS OR ITEM OF SERVICE.

12. LIMITATION OF LIABILITY. IN NO EVENT WILL COMPANY BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, INTEREST, LOST GOODWILL, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION, OR CLAIMS OF CUSTOMER'S CUSTOMERS, WHETHER BASED ONCONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IFADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

13. STATUTE OF LIMITATIONS. NO ACTION ARISING OUT OF ANY CLAIMEDBREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMERMORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.

14. CONSUMER PRODUCTS.With respect to “consumer products” as defined under the Magnuson-Moss Warranty Act (“MMWA”), the following statements are made. (a) Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply toyou. IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITEDTO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 10 ABOVE. (b) Somestates do not allow the exclusion or limitation of incidental or consequential damages, so the abovelimitation or exclusion may not apply to you. (c) This warranty gives you specific legal rights and youmay also have other rights which vary from state to state.

15. FORCE MAJEURE. Any delay or failure of Company to perform its obligations hereunder willbe excused to the extent that it is caused by an event or occurrence beyond its control such as, by way of example and not by way of limitation, acts of God, actions by any governmental authority (whethervalid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms,explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, but not limitedto, lockouts, strikes, and slowdowns) at Company's facility, its source plant or their suppliers, inabilityto obtain power, material, labor equipment, or transportation, or court injunction or order. The deliverydate will be extended for a time equal to that of the delay and the schedule for Company’s performancewill be deemed adjusted in the individual order(s) to that effect.

16. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with any attachmentsor supplements specifically referenced in this Agreement, constitutes the entire agreement between theparties hereto and supersedes all previous communications, representations, or agreements, either oralor written, between the parties hereto with respect to the subject matter hereof. No agreement or understanding varying or expanding this Agreement will be binding upon either party hereto unless it is in writing and signed by a duly authorized representative thereof.

17. TERMINATION. (a) This Agreement may be terminated by either party by giving 30 days' written notice to the other party in the event of failure by such other party to fulfill any of its obligations hereunder. However, if during the period of such notice, such other party remedies such failure, this Agreement will continue with the same force and effect as if such notice had not beengiven. (b) This Agreement may be terminated upon the written mutual consent of the parties. (c) Eitherparty may immediately terminate this Agreement by giving written notice to the other party in the eventof the happening of any of the following or any other comparable event: (i) insolvency of the otherparty; (ii) filing of a petition in bankruptcy by or against the other party; (iii) appointment of a receiveror trustee for the other party; or (iv) execution of an assignment for the benefit of creditors by the otherparty, all of which will allow Company to demand reclamation of all affected orders. (d) Except asprovided in this section 17, Customer may not terminate this Agreement, in whole or in part, unlessCompany’s prior written consent is obtained and Customer agrees to pay all of Company’s cancellationcharges.

18. GOVERNING LAW; VENUE; AND EXPENSES. (a) This Agreement and any disputes or controversies arising hereunder will be governed by and construed according to the internal laws of the State of Indiana, United States of America, without regard to its conflict of law principles, and notincluding the United Nations Convention on Contracts for the International Sale of Goods. (b)Jurisdiction and venue with respect to any action, proceeding, or suit in connection with this Agreementwill reside in the courts of the State of Indiana. (c) Customer agrees to pay for all expenses (includingattorney’s fees) incurred by Company in enforcing the obligations of Customer under this Agreement.

19. COMPLIANCE WITH LAWS, EXPORT CONTROLS, CERTIFICATIONS, AND NUCLEAR LIABILITY. (a) This Agreement is subject to, and Company and Customer will comply with, all laws and export controls, regulations, rules, orders, licenses, requirements, and governmental requests now or hereafter in effect in the United States of America that pertain to theProducts or the initial sale of the Products or that pertain to Services. Provided however, Company isnot responsible for obtaining or maintaining any permits for the performance of Services or the verification or compliance with any code requirements relative to the performance of Services. To theextent any sale of Products or Services pursuant to this Agreement may require approval of the U.S.Government, Company’s obligations under this Agreement are conditioned upon the grant of such approval and upon compliance by Customer with any restrictions imposed by the U.S. Government inconnection with such approval. (b) Certain Products are noted by Company as tested by independentlaboratories for compliance with UL and/or ANSI standards. Any and all modifications or alterations to such Products will void such certification, and Company is not liable to Customer to certify any modified or altered Product. (c) In the event the Products are to be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or governmental indemnity protecting Company against liability. The Customer hereby releases and agrees to indemnify Company and itssuppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out ofthe nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers.

20. NO INDUCEMENTS. The parties hereto represent to each other and each agrees that, neither itnor any person acting on its behalf has, in contravention of any applicable law, given or offered to give,or will give or offer to give, any sum of money or other material consideration to any person, directly orindirectly, as an inducement to obtain business hereunder or to influence the granting of licenses orother governmental permissions to enter into this Agreement or perform obligations hereunder.

21. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or unenforceable under any statute, regulation, ordinance, executive order, or other rule of law, that provision will be deemed severed to the extent necessary to comply with such statute, regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate ingood faith to arrive at an alternative arrangement approximating the original business objective of theparties. The remaining terms and conditions of this Agreement will remain in effect.

22. NO IMPLIED WAIVER. The failure of either party at any time to require performance by theother party of any provision of this Agreement will in no way affect the right to require such performance at any time thereafter, nor will the waiver of either party of a breach of any provision ofthis Agreement constitute a waiver of any succeeding breach of the same or any other provision.

23. MISCELLANEOUS. (a) This Agreement does not constitute either party the agent or legal representative of the other party. Neither party is authorized to create any obligation on behalf of theother party including, but not limited to, the obligation for payment of any service or warranty obligation hereunder. (b) Neither this Agreement nor any right or obligation hereunder may be transferred or assigned by either party without the prior written approval of the other party, except thatCompany can transfer or assign this Agreement or any right or obligation (including, but not limited tothe right to receive payments for any orders) to Ingersoll-Rand Company or an Ingersoll-Rand Company entity without first obtaining Customer’s consent. (c) The rights and remedies herein reservedto Company will be cumulative and additional to any other or further rights and remedies provided atlaw or equity. (d) Customer does not have the right to setoff or to back charge against any amountswhich become payable to Company under this Agreement or otherwise. (e) The official text of thisAgreement is in the English language. If this Agreement is translated into another language, the Englishtext will govern any question with respect to interpretation. (f) The headings in this Agreement are forconvenience of reference only and do not affect the meaning of this Agreement in any manner.

24. DEFINITIONS. (a) “Agreement”means Ingersoll-Rand Company, Security Technologies SectorTerms and Conditions of Sale and Service. (b) “Company” means Ingersoll-Rand Company, SecurityTechnologies Sector. (c) “Customer”means the Buyer. (d) “Buyer”means the purchaser of productsor Services from Company. (e) “U.S.” means United States of America.

11-1/2


Table of Contents

1

Alphabetical Index

B Series Key-in-Lever.................B-1 – B-8

D Series Deadlocks100 Series......D100-1 – D200-10200 Series......D100-2 – D200-10

H Series Interconnected ............H-1 – H-6

MA Series Mortise................MA-1 – MA-14

RU Series Unit Lock Retrofit..RU-1 – RU-12

T Series Key-in-Lever................T-1 – T-10

W Series Key-in-Lever / Knob..W-1 – W-8

X Series Key-in-Knob.................X-1 – X-8

Y Series Key-in-Knob/Lever .......Y-1 – Y-6

Miscellaneous Information.............................................2Finishes .............................................................................3Freight Weight Chart .......................................................4Forms and Examples ......................................................8Product Index ........................................................Index-1

Product Type Index

Mortise Locksets

Knob Trim..................................................................MA-5Lever Trim....................................................MA-5 – MA-6Trim Packages.........................................................MA-14Full Body Deadlocks ..............................................MA-15

Key-in-Lever Locksets

Grade 1 Cylindrical .......T Series.................................T-3Grade 2 Cylindrical .......B Series ................................B-3Grade 2 Cylinder ...........W Series..............................W-4Grade 2 Tubular.............Y Series ................................Y-3

Key-in-Knob Locksets

Grade 2 Cylindrical .......W Series..............................W-5Grade 1 Cylindrical .......X Series................................X-3Grade 2 Tubular.............Y Series ................................Y-3

Interconnected Locksets

Grade 2...........................H Series................................H-3

Retrofit Products

Unit / Pre-Assembled....RU Series ..........................RU-3

Deadlocks

Grade 1 Tubular.............D100 Series ...................D100-3Grade 2 Tubular.............D200 Series ...................D200-3

Auxiliary Products

Padlocks and Keyed Locking Cables ...................MSC-3Mounts ..................................................................MSC-11Cabinet Locks .......................................................MSC-10

Cylinders, Keys and Keying

Conventional ............................................................CYL-2Interchangeable Cores............................................CYL-7Keys and Key Blanks...............................................CYL-8Keying Charges......................................................CYL-10Parts and Service Equipment ..............................CYL-13Pins and Pin Kits....................................................CYL-16Service Equipment & Supplies............................CYL-17Construction Core Program.................................CYL-11

Forms

Master Keying ................................................................15

LOCKS FOR THICK DOORSMany Series of Falcon locks are available for doors over 1-3/4" thick. Consult the options section for each series for available doorthicknesses and charges.

LEAD-LINING OR LEAD-WRAPPINGT and RU Series locksets and latchsets are available lead-lined. MA Series locksets are available lead-wrapped. Consult the optionssection for each series for availability and charges.

ABRASIVE COATING AND KNURLINGAbrasive coated or knurled knobs or levers are available for most Falcon locksets and latchsets. Consult the options section for eachseries for availability and charges.

MOUNTED LOCK SAMPLESIndividual mounted samples are available for all lock series. The samples are mounted on a mount block and are fully operative thusallowing demonstration of each functions’ individual features. There is a nominal charge for the mount block. There is no charge formounting of the hardware. See MSC-11 for mount selection.

SET OF FINISH SAMPLES One (1) of each finish on 1-1/4" diameter disks attached together with a bead chain.

Finishes Included: 605, 606, 613, 625, 626 & 630 Contact your SSC representative for availability

COMPETITORS’ KEYWAYSA selection of standard keyways of other lock manufacturers is available as listed below (6-pin only). Consult options sections ofeach series for availability. (Not available in any mortise and rim cylinders, except Schlage C, or factory master keyed.) Furnished 0-Bitted unless otherwise specified.

INTERCHANGEABLE CORESThe “A” keyway is standard for IC products and will be supplied unless otherwise specified. A, B, C, D, DD, E, F, G, H, J, K, L, M,N, Q, R, TB, TD are equivalent to Best and Arrow IC keyways of the same names. Consult IR Mechanical Safety Customer Servicefor restricted keyways not listed here. Conventional cylinders are not compatible with interchangeable core.

COMPETITORS’ CORESFalcon standard IC preps accept Arrow (including Flex-Core), Best (including PKS and Peaks), InstaKey, Kaba Peaks, Keymark andKSP cores. Other brands of interchangeable cores are compatible with T and RU Series locksets. See those sections for details.

CONVENTIONAL CYLINDERSThe “G” keyway is standard for conventional cylinder products and will be supplied unless otherwise specified. E, H, K, L, N and Pare also available. Consult IR Mechanical Safety Customer Service for restricted keyways and other keyways not listed here.

* Interchangeable core not compatible with conventional cylinders

Miscellaneous Information

Manufacturer Keyway Keying Options

60 O Bitted, KDCorbin Russwin L4 O Bitted, KA4Russwin

D1 O Bitted, KDSargent LA O Bitted, KD

Schlage C O Bitted, KD, KA4E O Bitted

Yale 8 (Para) O Bitted, KD


FINISHESAlthough we apply the finest available protective plating and/or enamel coating to the surface of our products, these finishes havelimitations and in time may deteriorate either from exposure to weather, pollution, perspiration, extremes of climate, frequency ofuse or other factors. Deterioration of these finishes is, therefore, not a defect, but a normal process which is unavoidable. OurCompany cannot accept responsibility for finish deterioration in these circumstances and therefore the finishes cannot be guaranteed.These products will not be refinished or replaced under our warranty should deterioration of finishes occur.

Some finishes are not suggested for areas that are subject to corrosive climate or chemical conditions. We recommend chrome platedor stainless steel finishes for these areas.

* 605 Finish is not recommended for corrosive climates.

** Oil rubbed bronze (613) is considered a category “B” finish by ANSI/BHMA and will vary in color when applied to different

alloys and forms of base material. 613 will also vary from production lot and additionally from one manufacturer to another. Oil

rubbed bronze will wear off over time due to the “rubbed” finishing method that has no protective coating or plating.

Please refer to price columns for each lock series for finish availability.

HOW TO SPECIFY FINISHES

STRAIGHT FINISHES: When the finish is to be the same for both sides of the door.

EXAMPLE: 40 EA. 511HG 626

SPLIT FINISHES: Finish may vary from one side of the door to the other.

EXAMPLE: 40 EA. X301TG 606 x 625 (Outside finish is always specified first)

Schedule of Finishes Ordering Format

ANSI/BHMAFinish U.S. StandardCode Code Description

605* 3 Bright Brass - Clear Coated606 4 Satin Brass - Clear Coated613** 10B Satin Bronze; Dark Oxidized and Oil Rubbed625 26 Bright Chromium626 26D Satin Chromium630 32D Satin Stainless Steel


3


Freight Weight Chart

4

Case Avg. Wt.Lock Series Functions Trim Quantity per Case

161 341 501511 561 581 18 lbs.

611 D Q 4B101 301 17 lbs.

12 10 14 lbs.111 151 33 lbs.

D100 121 - 20 31 lbs.131 43 lbs.

211 251 30 lbs.

D200221 231

- 2034 lbs.

261M 18 lbs.271 22 lbs.

H 101 451 461 E H 4

16 lbs.511 D 16 lbs.

451 521 531 AN DN QN SN 32 lbs.541 561 571581 851 881 AG DG QG SG 28 lbs.

371 381 411 AN DN QN SN 37 lbs.431 441 AG DG QG SG 33 lbs.

101 161AN DN QN SN 32 lbs.AG DG QG SG 28 lbs.MA

301 311 321AN DN QN SN

432 lbs.

AG DG QG SG 28 lbs.

12AN DN QN SN 16 lbs.AG DG QG SG 12 lbs.

18 AN DN QN SN16 lbs.

AG DG QG SG451 521 531 HG 24 lbs.541 551 561 571581 851 881 HN 25 lbs.

371 381 411 HG 26 lbs.431 441 HN 27 lbs.

101 161HG 21 lbs.

MA HN 4 22 lbs.

301 311 321HG 23 lbs.HN 24 lbs.

12HG 10 lbs.HN 11 lbs.

18 HG 20 lbs.HN 21 lbs.

Mortise911 931 21 lbs.

Deadlocks 921 - 4 22 lbs.941 20 lbs.

Case Avg. Wt.Lock Series Functions Trim Quantity per Case

501 511 52121 lbs.

RU561 571 581381 411 851 D Q 4

22 lbs.881101 301 20 lbs.

291 351 381 411501 511 521561 571 581 A D Q 4 20 lbs.

T 851 881101 301

12 10 18 lbs.501 511 581 36 lbs

56110

37 lbs.W Levers 101 201 301 D Q 34 lbs.

161 27 lbs.12 24 29 lbs.

501 511 581 21 lbs

W Knobs561 D Q 10 22 lbs.

101 301 19 lbs.12 24 10 lbs.

501 511 521 EG HG TG 10 29 lbs.561 571 581 EY HY TY 6 19 lbs.

411 EG HG TG 10 30 lbs.EY HY TY 6 20 lbs.

X 101 EG HG TG 10 27 lbs.EY HY TY 6 18 lbs.



521 561 581 27 lbs

Y Levers101 161 D Q 12 24 lbs.

301 25 lbs.12 20 15 lbs.

521 561 581 10 16 lbsY Knobs 101 161 301 E H 14 lbs.

12 20 10 lbs.1" Shackle 18 lbs.

Padlocks 2" Shackle - 18 21 lbs.6" Shackle 24 lbs.

985 8 lbs.956 986 9 lbs.

957 987 250 10 lbs.Conventional 988 - 20 11 lbs.

Cylinders 990 13 lbs.965 966 973974 992 985T 15 lbs.

986T986 987 996 7 lbs.261 264 952953 976 977 8 lbs.

Mortise and 997Rim Cylinders 988 - 20 9 lbs.

262 265 10 lbs.990 11 lbs.992 13 lbs.

942 943 945 12 lbs.Cabinet Locks 959 - 20 13 lbs.

979 14 lbs.Mail Box Lock 982 20 5 lbs


5

WHERE TO SEND ORDERS

Type of Order Fax No. Mailing Address

888-840-7732 (West)Falcon Lock

Factory888-840-7735 (East)

3899 Hancock ExpresswaySecurity, CO 80911877-671-7011

PRODUCT IDENTIFICATION CODING

Latch Suffix

D DeadlatchS Springlatch

Cylinder Suffix

P 6 pin cylinder, keyed to 5 chambersL Less cylinderB Less SFIC

BDC Disposable construction core (SFIC)**

J FSIC core prep (competitor’s full-size IC, designate competitor in “Additional Details” of Order Form)

G SFIC (Old Falcon designation = WIC)H Construction Core SFIC (brass, keyed)

BB Best Syle Capped Core (SFIC)CP6 Schlage C Keyway

Trim and Chassis Prefix

6 Abrasive Lever (6DA = Dane Lever x abrasive strip)8 Knurled (8TG = Troy-Gala knob trim x knurled lever or knob)9 Lead-Lined (9AV = Avalon lever x lead-lining of levers (and/or chassis)

XCCorrosion resistant chassis (XC561 = X corrosion resistant chassis, classroom function)*

* X Series chassis only.

** SFIC = Small format interchangeable core

Note 1) Failure to use the above fax numbers or mailing address will delay processing of your order.


To order Falcon products, descriptive data should be in the same sequence as shown:

LINE OUTSIDE INSIDE DR ADDITIONAL

ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE THK EXT DIM DETAILS

1 2 3 4 5 6 7 8 9 10 11 12 13 14

1. LINE ITEM: Line item number2. QTY: Quantity3. PRODUCT: Complete lock product or part number4. OUTSIDE DES: Outside design code5. OUTSIDE FIN: Outside finish code6. INSIDE DES: Inside design code. Leave blank if same as outside design code.7. INSIDE FIN: Inside finish code. Leave blank if same as outside finish code.8. HAND: Hand of door. Only one hand allowed per line item.

Example: RH = Right Hand, LH = Left Hand, RHR = Right Reverse, LHR = Left Reverse.

9. LATCH: Latch. Leave blank for standard or specify part number if non-standard latch is required. LLL = Less Latch.

10. STRIKE: Strike. Leave blank for standard or specify part number if non-standard strike is required.LLL = Less Strike.

11. DR THK: Door Thickness. Enter door thickness if non-standard. Example: 138 = 1-3/8", 214 = 2 1/4", 212 = 2 1/2".

12. EXT: Extension. Enter one of the following when doors 2" thick or greater are specified:EE = Extended EquallyEI = Extended InsideEO = Extended OutsideED = Extended Differently

EI or EO assumes the latch will be centered on a 1-3/4" door, to which material has been added.13. DIM: Enter dimension for non-standard strike lip length and mortise cylinder or blocking ring length.

012 = 1/8" 118 = 1-1/8"018 = 3/16" 114 = 1-1/4"025 = 1/4" 138 = 1-3/8"031 = 5/16" 112 = 1-1/2"037 = 3/8" 158 = 1-5/8"050 = 1/2" 134 = 1-3/4"078 = 7/8" 200 = 2"100 = 1" 400 = 4"

14. ADDITIONAL DETAILS: Enter detail for keying information and for special requirements.

How to Determine Hand of Door

RHRLHR


7

LINE OUTSIDE INSIDE DR ADDITIONAL

ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE THK EXT DIM DETAILS/KEYING

Four Y-Series passage locks with a Dane lever in 626.

1 4 Y101 DAN 626 01-043 01-046

Ten B-Series storeroom locks with a Dane outside lever in 605 and Dane inside lever in 626, with a 2-3/8 radius face

latch and full lip radius strike, 6-pin standard cylinder, G keyway.

2 10 B581PD6 DAN 605 DAN 626 57421 5104-1

Four T-Series entry office locks with an Avalon lever in 613, standard latch and strike, 5-pin standard cylinder, G keyway

3 4 T511PD AVA 613 98535 5164 134

Three T-Series entry office locks with a Quantum lever in 605, abrasive outside lever, standard latch and strike,

for 2-1/4" thick doors, 6-pin standard cylinder, G keyway, masterkeyed to new system, with 3 keys each.

Provide 2 masterkeys.*

4 3 T511PD6 6QU 605 QUA 98535 5164 214 G Keyway, w/3 keys ea.

5 2 KB578 G Section,Master Key

6 3 50-215 Extra cut keysCharges

7 3 50-210 Master KeyingCharges

Two X-Series dormitory locks with a Troy knob and Gala rose in 606, 7-pin SFIC, A keyway, 0-bitted, one

control key, less strike.

8 2 X571BD7 TG 606 98535 LLL A - 000000

9 1 KB609-2 A Section, Control Key 0-bit

Two M-Series dormitory locks with a Hana knob and Gala rose in 625, right hand, lead-lined, 6-pin SFIC, A keyway,

construction core, one control key, two change keys.

10 2 MA571HD6 9HG 625 RHA Section,

11 2 KB632-1 Const. Change Key

12 1 KB609-1 A Section, Const. Ctrl Key

One M-Series dormitory locks with a Hana knob and Gala rose in 625, left hand reverse, knurled outside knob,

6-pin SFIC, disposable construction core.

13 1 MA571BDC 9HG 625 LR

Five W-Series classroom locks with a Dane lever in 626. Standard latch and strike. 6-pin Schlage C keyway,

Keyed Different.

14 5 W561PD6 DAN 626 30-197 30-148 Sch C KD

*Use Master Keying Schedule form and appropriate Master Key Specification Sheet when ordering.


FORMS & EXAMPLES •

May 1, 2003

To: Falcon Dealer100 East AvenueDealer City, State 11111

RE: District 10, Jones Elementary School

Please consider this authorization to ship product for the above-referenced project.

Jones Elementary School is to be keyed using a new Falcon Restricted Key System. For security reasons,we would like to have all keys for this facility shipped to a location other than the job site. Master keyedproducts, however, can be shipped directly to the site. This letter authorizes Falcon to ship our restrictedproducts to the following addresses:

Master Keyed Products, Construction Keys, Locks Less Cylinders, and Locks with Construction Cores

Attn: Building Project ManagerDistrict 10 Schools555 Main StreetEnd User City, State 55555

Master Keys, Change Keys, Control Keys, and Key BlanksAttn: LocksmithDistrict 10 Lockshop1201 Fifth AvenueEnd User City, State 55555

These two addresses above serve as our only authorized shipment addresses for all orders placed for ourfacility. We understand that this letter will be kept on file and referenced for our future orders and that anew letter is only required to add, remove, or change authorized shipping locations.

Sincerely,

End User RepresentativeFacilities Manager

Date - REQUIRED

Facility Name - REQUIRED

Dealer Name -

RECOMMENDED

Authorized Ship -

To Addresses -

REQUIRED

End User

Representative

Signature -

REQUIRED

Letter may be mailed or faxed to Falcon

Falcon Restricted Order Processing

3899 Hancock ExpresswaySecurity, CO 80911Fax: (888) 840-7735

District 10 Schools 555 Main StreetEnd User City, State 55555(555) 555-5555

End UserLetterhead -REQUIRED

DISTRICT 10

Sample Letter of AuthorizationFor Falcon® Restricted Products

FA

LC

ON

No

n-M

aste

r K

eyed

OR

DE

RM

AR

K C

AR

TO

NS

:A

CC

OU

NT

NO

.P.

O. N

O

DA

TE

CU

ST

OM

ER

NA

ME

AN

D A

DD

RE

SS

:S

HIP

TO

:

Pag

e 1

of

____

___

©

200

6 In

ger

soll

Ran

d

AD

DIT

ION

AL

DE

TA

ILS

LIN

EO

UT

SID

EIN

SID

EU

se f

or

Key S

ecti

on

an

d B

itti

ng

ITE

MQ

TY

PR

OD

UC

TD

ES

FIN

DE

SF

INH

AN

DL

AT

CH

ST

RIK

EE

XT

DIM

Info

rmati

on

, K

A G

rou

ps,

etc

.

QU

OT

E#

PR

ICE

BO

OK

:

SH

IPP

ING

INS

TR

UC

TIO

NS

RE

QU

ES

TE

D S

HIP

DA

TE

OR

DE

R W

RIT

TE

N B

Y

FOR

FU

RT

HE

R IN

FOR

MA

TIO

N, C

ON

TAC

TN

ame:

Ph

on

e:

Fax.

Available @ www.falcon.ingersollrand.com

Acco

un

t No

. _______ _____________ P.O. N

o. ______________________ P

age _______ o

f _______ ©

2006 Ing

ersoll R

and

AD

DIT

ION

AL

DE

TA

ILS

LIN

EO

UT

SID

EIN

SID

EU

se fo

r Key S

ectio

n a

nd

Bittin

gIT

EM

QT

YP

RO

DU

CT

DE

SF

IND

ES

FIN

HA

ND

LA

TC

HS

TR

IKE

EX

TD

IMIn

form

atio

n, K

A G

rou

ps, e

tc.

FA

LC

ON

QU

OT

E#

PR

ICE

BO

OK

:

SH

IPP

ING

INS

TR

UC

TIO

NS

RE

QU

ES

TE

D S

HIP

DA

TE

OR

DE

R W

RIT

TE

N B

Y

FOR

FU

RT

HE

R IN

FOR

MA

TIO

N, C

ON

TAC

TN

ame:

Ph

on

e:

Fax.

Mas

ter

Key

edO

RD

ER

Att

ach

Key

Sys

tem

Su

mm

ary

MA

RK

CA

RT

ON

S:

AC

CO

UN

T N

O.

P.O

. NO

D

AT

E

CU

ST

OM

ER

NA

ME

AN

D A

DD

RE

SS

:S

HIP

TO

:

Pag

e 1

of

____

___

©

200

6 In

ger

soll

Ran

d

AD

DIT

ION

AL

DE

TA

ILS

LIN

EO

UT

SID

EIN

SID

EH

AN

DU

se f

or

Key S

ecti

on

an

d B

itti

ng

ITE

MQ

TY

PR

OD

UC

TD

ES

FIN

DE

SF

INL

AT

CH

ST

RIK

EE

XT

DIM

Info

rmati

on

, K

A G

rou

ps,

etc

.

Key a

nd

Lab

el

Instr

ucti

on

s____________K

Hd

gIt

em

#Q

tyD

oo

r#K

ey

MK

(En

ter

bel

ow

lin

e it

em)

Sym

bo

l(s)

Sym

bo

l(s)

(On

lyo

ne

han

dp

er li

ne

item

)

Available @ www.falcon.ingersollrand.com

Acco

un

t No

. _______ _____________ P.O. N

o. ______________________ P

age _______ o

f _______ ©

2006 Ing

ersoll R

and

AD

DIT

ION

AL

DE

TA

ILS

LIN

EO

UT

SID

EIN

SID

EH

AN

DU

se fo

r Key S

ectio

n a

nd

Bittin

gIT

EM

QT

YP

RO

DU

CT

DE

SF

IND

ES

FIN

LA

TC

HS

TR

IKE

EX

TD

IMIn

form

atio

n, K

A G

rou

ps, e

tc.

Key a

nd

Lab

el In

stru

ctio

ns____________K

Hd

gIte

m#

Qty

Do

or#

Key

MK

(En

ter belo

w lin

e item)

Sym

bo

l(s)

Sym

bo

l(s)

(On

lyo

ne

han

dp

er line

item)


Ordering Forms Forms & Examples

13

FALCON LOCKStandard Cylinder Key SystemSpecification Sheet

This form must be filled out as completely and accurately aspossible so that Falcon Lock may provide you with exactly whatyou need for your Standard Cylinder key system.

5. Key Quantities

Level Qty❏ GGGMK❏ GGMK❏ GMK 4❏ MK 2 ❏ SKD❏ Other:

Change Keys# of keys per Cylinder 3# of keys per Key Symbol

Special Function❏ Construction Keys❏ EMK❏ Housekeeping❏ Engineering❏ Janitor❏ MechanicalOther:

6. Packing/Marking

❏ Change Keys packed with Locks❏ Change Keys packed separatelyMarking Instructions

Special Instructions

7. Shipping Address

Construction Keys/Cores

Permanent Keys/Cylinders

Customer: Your Distribution

Job Name: Your Job Name Here

Location: City, State

1. System StatusNew ❏Existing ❏

Falcon ❏Key File or Factory Order #Weiser ❏

Bitting Sheet (attach) ❏Construction Keyed Yes ❏ No ❏

2. System Type018 (standard) ❏025* (restricted) ❏* Requires prior factory approval

3. CylindersType

5 Pin ❏6 Pin ❏7 Pin ❏Keyway(s) Specify: G

Stamping:Keyset Symbol ❏Plug Face ❏Cylinder Side ❏

4. KeysKey Section(s) Specify: GType

5 Pin ❏6 Pin ❏7 Pin ❏Embossed ❏Non-Embossed ❏Large Bow ❏Plastic ADA Bow ❏

StampingBitting Number ❏Keyset Symbol ❏Do Not Duplicate ❏U.S. Govt. Prop. Do Not Duplicate ❏Special Stamping


Ordering FormsForms & Examples

14

FA

LC

ON

9. Bitting List 10. Name of person to contact with questions

Required Yes ❏ No ❏Ship To Address Name:

End user address hereLOA must accompany order for all Tel: Bitting list requests

Fax:

11. Name and signature of person responsible for the integrity of this key system:

Name: Title:

Signature:

This document will become part of the permanent keying files for this project. If therequirements that have been specified on this document change, it is the responsibility ofthe end user/owner to notify their local factory representative or Falcon Lock.

FALCON LOCK3899 Hancock Expressway

Security, CO 80911877-671-7011

International Only001-512-712-1316

US FAX 888-840-7732US FAX 888-840-7735

International FAX 719-896-3387

8. Additional Information (Specialized Keyset Lettering, System Expansion Notes, Cross Keying, Remarks, etc.)

Provide system to allow for 100% expansion


15

FA

LC

ON

Interchangeable Core KeySystem Specification Sheet Master Keying

Customer: ___________________________________

Job Name:___________________________________

Location: ____________________________________

1. System StatusNew ❏Existing ❏

Falcon ❏Key File or Factory Order #Best ❏Arrow ❏


2. System Type A-2 (standard) ❏A-4❏

3. CoresStyle

Slide Cover ❏Capped ❏

Type ❏6-Pin7-Pin

Key Section(s) Specify:Stamping:

Keyset Symbol ❏Face ❏Side ❏

4. Keys

Keyway(s) Specify:Type

6-Pin ❏7-Pin ❏Embossed ❏Non-Embossed ❏Plastic ADA Bow ❏


This form must be filled out as completely and accurately aspossible so that Falcon Lock may provide you with exactlywhat you need for your Key System.

5. Keyed Quantities

Level Qty.❏ GGGMK ______________❏ GGMK ______________❏ GMK ______________❏ MK ______________❏ SKD ______________❏ Other ______________

Change KeysNumber Keys per Symbol ______________Number Keys per Cylinder ______________

Special Function❏ Control ______________❏ Construction Keys ______________❏ Construction Control ______________❏ SKD Control ______________❏ EMK ______________❏ Housekeeping ______________❏ Engineering ______________❏ Janitor ______________❏ Mechanical ______________❏ Other: ______________

6. Packing/Marking

❏ Change Keys packed with Cores❏ Change Keys packed separately

Marking Instructions


7. Shipping Address


Permanent Keys/CylindersFALCON LOCK3899 Hancock Expressway877-671-7011 phoneUS fax 888-840-7735 (East)

888-840-7732 (West)Fax 719-896-3387 (International only)www.falcon.ingersollrand.com


FA

LC

ON

Master Keying

8. Additional Information

(Specialized Keyset Lettering, System Expansion Notes, Cross Keying, Remarks, etc.)

9. Bitting List

Required Yes ❏ No ❏Ship To Address:

10. Name of person to contact with questions

Name: ______________________________________Tel: _________________________________________Fax: _________________________________________


Name: ______________________________________Title: ________________________________________Signature: ___________________________________

This document will become a part of the permanent keying files for this project. If the requirements that have been specified on this document change, it is the responsibility of the end user/owner to notify their local factoryrepresentative or Falcon Lock Company.

FALCON LOCK3899 Hancock ExpresswaySecurity, CO 80911877-671-7011 phoneUS fax 888-840-7735 (East)



17

FA

LC

ON

Master KeyingKey System Specification Sheet

Customer: ___________________________________

Job Name:___________________________________

Location: ____________________________________

1. System Status

New ❏Existing ❏

Falcon ❏Key File or Factory Order # ________________


2. System Type

018 (standard) ❍025* (restricted) ❍* Requires prior factory approval

3. Cylinders

Type5-Pin ❏6-Pin ❏7-Pin ❏Keyway(s) Specify: _______________________

StampingKeyset Symbol ❏Plug Face ❏Cylinder Side ❏

4. Keys

Key Section(s) Specify: ____________________Type

5-Pin ❏6-Pin ❏7-Pin ❏Embossed ❏Non-Embossed ❏Large Bow ❏


This form must be filled out as completely and accurately aspossible so that Falcon Lock company may provide you withexactly what you need for your Key System.

5. Keyed Quantities

Level Qty❏ GGGMK ______________❏ GGMK ______________❏ GMK ______________❏ MK ______________❏ SKD ______________❏ Other ______________

Change KeysNumber of Keys Per SymbolNumber of Keys Per Cylinder______________

Special Function❏ Construction Keys ______________❏ EMK ______________❏ Housekeeping ______________❏ Janitor ______________❏ Mechanical ______________❏ Other: ________________________________

6. Packing/Marking

❏ Change Keys packed with Locks❏ Change Keys packed separately

Marking Instructions


7. Shipping Address


Permanent Keys/Cylinders




FA

LC

ON

Master Keying

8. Additional Information

(Specialized Keyset Lettering, System Expansion Notes, Cross Keying, Remarks, etc.)

9. Bitting List

Required Yes ❏ No ❏Ship To Address:

10. Name of person to contact with questions

Name: ______________________________________Tel: _________________________________________Fax: _________________________________________


Name: ______________________________________Title: ________________________________________Signature: ___________________________________

This document will become a part of the permanent keying files for this project. If the requirements that have been specified on this document change, it is the responsibility of the end user/owner to notify their local factoryrepresentative or Falcon Lock.



FA

LC

ON

QU

OT

E#

PR

ICE

BO

OK

:

SH

IPP

ING

INS

TR

UC

TIO

NS

RE

QU

ES

TE

D S

HIP

DA

TE

OR

DE

R W

RIT

TE

N B

Y

FOR

FU

RT

HE

R IN

FOR

MA

TIO

N, C

ON

TAC

TN

ame:

Ph

on

e:

Fax.

Mas

ter

Key

edO

RD

ER

Att

ach

Key

Sys

tem

Su

mm

ary

MA

RK

CA

RT

ON

S:

AC

CO

UN

T N

O.

P.O

. NO

D

AT

E

CU

ST

OM

ER

NA

ME

AN

D A

DD

RE

SS

:S

HIP

TO

:

Pag

e 1

of

____

___

©

200

6 In

ger

soll

Ran

d

AD

DIT

ION

AL

DE

TA

ILS

LIN

EO

UT

SID

EIN

SID

EH

AN

DU

se f

or

Key S

ecti

on

an

d B

itti

ng

ITE

MQ

TY

PR

OD

UC

TD

ES

FIN

DE

SF

INL

AT

CH

ST

RIK

EE

XT

DIM

Info

rmati

on

, K

A G

rou

ps,

etc

.

Key a

nd

Lab

el

Instr

ucti

on

s____________K

Hd

gIt

em

#Q

tyD

oo

r#K

ey

MK

(En

ter

bel

ow

lin

e it

em)

Sym

bo

l(s)

Sym

bo

l(s)

(On

lyo

ne

han

dp

er li

ne

item

)

27W

1386

5-S

AM

PL

E10

3

SH

IP B

ES

T W

AY

PA

RT

IAL

SH

IPM

EN

T I

S O

K

Jun

e 14

, 200

5

Joh

n R

. Doe

, AH

C

Joh

n R

Doe

888.

555.

1212

888.

555.

1717

AC

ME

OF

FIC

E A

ND

IN

DU

ST

RIA

L P

AR

KA

BC

CO

NT

RA

CT

ING

AM

AL

GA

MA

TE

D C

ON

TR

AC

T H

AR

DW

AR

E12

34 Y

our

Str

eet

You

r T

own

, YS

000

00-0

000

SA

MP

LE

123

SA

MP

LE

-AB

CM

ay 1

7, 2

005

AM

AL

GA

MA

TE

D C

ON

TR

AC

T H

AR

DW

AR

E12

34 Y

our

Str

eet

You

r T

own

, YS

000

00-0

000

14

MA561BB

AVA

626

RH

Best Style caping SFIC

151

209

AA2

AA,A

161

230

AB7

AB,A

261

213

AB10

AB,A

23

MA561BB

AVA

626

LHR

Best Style capping SFIC

171

204B

AA4

AA,A

231

205

AA2

AA,A

381

222

AA3X

AA,A

31

MA301

AVA

626

AVA

625

RHR

121

202A

41

C977

626

Supply with Adams-Rite Cam (A12667-001-00)


FA

LC

ON

Master Keying Keying Schedule Form

Total QTY PRODUCT FINISH

Stamp/Mark:

Quantity Keyset Door# Hand Misc Remark




B-1

B-SeriesIntroduction

Table of Contents

Function Chart B-2

Complete Lock Pricing B-3

Options B-4

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-4

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-4

Conventional Cylinder Options . . . . . . . . . . . .B-5

Small Format Interchangeable Cores . . . . . .B-5

Small Format Construction Cores . . . . . . . . .B-5

Locks Less Components . . . . . . . . . . . . . . . .B-6

Tactile Warning Strip (not available in 613) . .B-6

Parts B-7

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-7

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-7

Chassis Assemblies . . . . . . . . . . . . . . . . . . . .B-7

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-8

Miscellaneous Parts . . . . . . . . . . . . . . . . . . . .B-8

Complete Conventional Cylinders B-6

How To Order Forms & Examples

Product Identification

B 501 P D

Latch SuffixD = DeadlatchS = Springlatch

Cylinder SuffixB = Less SFICBDC = Disp. Const. CoreBB = With SFIC Core (Best)G = With SFIC Core (Falcon)H = With Keyed Const.

CoreL = Less 6-Pin CylinderP = 6-Pin Cylinder pinned

to 5 chambersP6 = 6-Pin Cylinder pinned

to 6 chambersCP6 = 6-Pin Cylinder

Schlage CFunction

See B-2

Lock Series

SFIC = Small Format (Best® Style) Interchangeable Core

Finish Codes and DescriptionsCode Description

605 (US3) Bright Brass

606 (US4) Satin Brass

613 (US10B) Oil Rubbed Bronze

625 (US26) Bright Chrome

626 (US26D) Satin Chrome

Standard Features - Furnished unless otherwise specified

Certification ANSI A156.2, Series 4000, Grade 2, UL Listed for 3-Hour fire door

Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw, 2-3/4" backset

Strike 1-1/4" x 4-7/8", ANSI, Square corner, no box

Cylinder 6-Pin, Solid brass, Keyed 5-Pin, Falcon G keyway, Keyed different (KD)

Door Range 1-3/8" - 2" standard

Keys Two, Nickel silver cut keys per lock, Falcon G keyway

Grade 2 Standard Duty Cylindrical LocksetsANSI-A156.2, SERIES 4000, GRADE 2


B-Series • Functions

B-2

B101 F75 Passage/Closet LatchsetLatch bolt by levers at all times.

B161 F111 Communicating Passage LockDeadlocking latch bolt by inside lever. Non-removable blank plate outside.

B301 F76 Privacy/Bedroom/Bath LockLatch bolt by levers. Outside lever locked by push button in inside lever. Rotating inside lever or closing door releases push button. Emergency release in outside lever unlocks door.

B341 F112 Communicating Store Room LockDeadlocking latch bolt by inside leverexcept when locked by key. Non-removable blank plate on oppositeside of lever (22/32" projection).

B501 F82 Entry LockPush button locking. Button on insidelocks outside lever until unlocked bykey or by rotating inside lever. Insidelever always free. Deadlocking latchbolt.

B511 F109 Entry/Office LockTurn/push button locking. Pushing andturning button locks outside leverrequiring use of key until button ismanually unlocked. Push buttonlocking. Pushing button locks outsidelever until unlocked by key or byrotating inside lever. Inside lever alwaysfree. Deadlocking latch bolt.

B561 F84 Classroom LockDeadlocking latch bolt by levers. Outside lever is locked by key in outside lever. Inside lever is always free.

B581 F86 Store RoomDeadlocking latch bolt by lever insideor key outside. Outside lever is alwayslocked. Inside lever always free.

B611 F90 Assisted Living/Corridor LockDeadlocking latch bolt by levers exceptwhen locked by push button on insidelever. Key in outside lever locks orunlocks outside lever and releasesbutton. Closing door releases push button.Inside lever is always free.

B12 Dummy TrimSingle Trim-surface mounted rigidlever.

ANSI A156.2 Series 4000 Grade 2

Key-In-Lever Locks

FALCON ANSI

Key-In-Lever Locks

FALCON ANSI


Grade 2 Standard Duty Cylindrical LocksetsANSI-A156.2, SERIES 4000, GRADE 2 Complete Locks • B-Series

B-3

D (Dane) Q (Quantum)

Key-In-LeverDesigns and Finishes

D Q605

Function Description 626 606 625 613

Single Cylinder FunctionsB341PD Connecting / ExitB501PD EntryB511PD Entry/Office $222.00 $234.00 $252.00 B561PD ClassroomB581PD StoreroomB611PD Assisted Living / Dormitory 251.00 263.00 281.00Non-Keyed FunctionsB101S Passage

160.00 172.00 190.00B161D Communicating LatchB301S Privacy 185.00 197.00 215.00Dummy TrimB12 Half Dummy 72.00 78.00 88.00

Conventional Cylinder Options

Description SpecifyAdd to Lock Price

(per core)5 pinned cylinder P Suffix

STDExample: B581P6 pinned cylinder P6 Suffix

Example: B581P66 pinned Competitor keyway cylinders* P6 Suffix

Example: B581P6 (0 Bitted, KD, KA4 only) N/CSchlage C (6 pin only) CP6 Suffix

Example: B581CP6 (All other keying, not listed above)

B-Series Complete Conventional Cylinders

Cylinder Mechanism Part NumberPrice Each

5 Pin Cylinder A23155-025 Pin Cylinder - B611 A23151-066 Pin Cylinder A23165-02 $38.00

6 Pin Cylinder - B611 A23161-06

* Competitor keyways are furnished 0 bitted, unless otherwise specified. Not available Master keyed, except Schlage C.

Notes: 1) Finishes: 606 and 626 only.2) Specify keyway.3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections add $9.00 to list price. See Restricted Keyway Policy (p. 8) for standard keyways and

policy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.

* Keying must be specified.**Locks are assessed one non-refundable handling charge (50-231F) per core.

Note: 5) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details

Small Format Interchangeable Core and Small Format Construction Core


(per core)Small format core * G Suffix

Example: B581GD6Small format core (Best Style) * BB Suffix $39.00

Example: B581BB6Small format construction core ** H Suffix 28.40

Example: B581HD6Less Small format core B Suffix N/C

Example: B581BDSmall format disposable core BDC Suffix 3.50

Example: B581BDC


B-Series • Cylinder Options

B-4


Latch and Strike Options • B-Series

B-5

Latches with Locks

BacksetSpecify

Description Springlatch/Deadlatch 301/611Add to Lock Price

Square corner, 1-1/8" x 2-1/4", standard 57435 576352-3/4" Square corner, 1" x 2-1/4" 57430 57630 N/C

1/4" Radius round corner, 1" x 2-1/4" 57431 57631 Square corner, 1" x 2-1/4" 57420 57620

2-3/8" ** Square corner, 1-1/8" 57425 57625 N/C1/4" Radius round corner, 1" x 2-1/4" 57421 57621

5" Backset extension link A31727-005-00 * $31.40

Strikes with LocksDescription Lip Length Specify Add to Lock Price

ANSI, 1-1/4" x 4-7/8" standard 1-5/16" 5164 N/CSquare Corner, full lip 1-5/8" x 2-1/4" 1" 01-049 N/C1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" 01-048 N/CSquare Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16" 01-046 N/CANSI dust box 1" deep, steel - 005099-000-30 N/CANSI, 1-1/4" x 4-7/8" 7/8" 5161 N/C

Strikes sold separateFinishes: 605, 606, 613, 626, 630 (ANSI only)

Description Lip Length Specify List Price

Square Corner, T-strike, 1-1/8" x 2-3/4" 1-1/8" Q001-0461/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1” Q001-048 $3.50Square corner, full lip 1-5/8" x 2-1/4" Q001-049ANSI, 1-1/4" x 4-7/8" standard 1-5/16" 005164-000 11.40 ANSI dust box 1" deep, steel - 005099-000-30 2.60 ANSI, 1-1/4" x 4-7/8" 7/8" 005161-000 11.40

Latches sold separateFinishes: 605, 613, 630

Backset & PriceLatch Face

2-3/8" 2-3/4" Price

1" Spring Latch (101) A57420-000 A57430-0001" Spring Latch (301) A57620-000 A57630-0001" Spring Latch - 1⁄4" Rad. (101) A57421-000 A57431-0001" Spring Latch - 1⁄4" Rad. (301) A57621-000 A57631-0001" Deadlatch A57420-00D A57430-00D1" Deadlatch (611) A57620-00D A57630-00D $23.301" Deadlatch - 1⁄4" Rad. A57421-00D A57431-00D 1" Deadlatch - 1⁄4" Rad. (611) A57621-00D A57631-00D1-1⁄8" Spring Latch (101) A57425-000 A57435-0001-1⁄8" Spring Latch (301) A57625-000 A57635-0001-1⁄8" Deadlatch A57425-00D A57435-00D1-1⁄8" Deadlatch (611) A57625-00D A57635-00D

* Backset extension link A31727-005-00 must be used with 2-3/8" backset latches** 2-3/8" backset is furnished as a 1" faceplate standard.

Shaded items are standard components and are furnished with locks unless otherwise specified.


B-Series • Trim and Chassis Options

B-6

Locks Less Components

Description SpecifyDeduct from Lock Price

Less standard cylinder L suffixExample: B581LD DAN $38.00

Less latch LLL for latchExample: B581PD DAN 626 LLL 5164 13.50

Less strike LLL for strikeExample: B581PD DAN 626 57435 LLL 7.10

LeversList Price

Part Number Description 605, 606, 613,625, 626

A31750-000 Lever, Dane closedA31751-000 Lever, Quantum closedA31750-001 Lever, Dane open $34.40A31751-001 Lever, Quantum open031700-002 Lever, Dane IC031701-002 Lever, Quantum IC

RosesList Price

Part Number Description 605, 606, 613,625, 626

031702-000 Rose, Outer031703-000 Rose, InnerA31764-000 Rose, Blank Insert and Post

$13.90

Tactile Warning (abrasive strip)Description Specify Add to Lock Price

Abrasive Strip Preface the design code with 6 $49.50Example: 6DA for DAN

Notes: 1) Outside lever only has abrasive strip adhered to the back surface of the lever.2) B581 Storeroom function locks should be used on doors requiring tactile warning of danger.3) Abrasive strip not available in 613 finish.

B Series Chassis AssembliesPart Number

Conventional Cylinder IC Core Description Price

A31706-000-00 B101 ChassisA31707-000-00 B161 Chassis

$99.90

A31709-000-00 A31709-001-00 B301/501 ChassisA31714-000-00 A31714-001-00 B511 Chassis

122.00

A31715-000-00 A31715-001-00 B561 Chassis 162.00A31716-000-00 A31716-001-00 B581 Chassis

A31708-000 A31708-001 B341 Chassis – 1-5/8" – 2" Door Thickness 122.00A31708-002 A31708-003 B341 Chassis – 1-3/8" – 1-5/8" Door ThicknessA31739-000 A31739-001 B611 Chassis 181.00

Note: 4) Chassis provided with trim finish on B341 and B611.


Parts • B-Series

B-7

ScrewsPart Number Description Finishes Size List Price021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo $0.40024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4" combo .18A31767-000 Screw pack

031742-000 (2 ea), 024416-012 (2 ea), 605, 613, 626 4.00021164-016 (2 ea)

Miscellaneous PartsPart Number Description List Price031705-000-30 Inside Rose Liner $1.40

031718-000 Push button cap 2.10031719-000 Turn button cap 2.10

031741-000-50 Lever insert 0.42

Price Book 108Effective January 31, 2011 • Rev. 1/11B-8

NotesB-Series


D100-Series

D100-1

Introduction

Table of Contents

Function Chart D100-2

Complete Lock Pricing D100-3

Options D100-4

Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . .D100-4

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-4

Conventional Cylinder Options . . . . . . . .D100-5

Small Format Interchangeable Cores . . .D100-5

Small Format Construction Cores . . . . . .D100-5

Locks Less Components . . . . . . . . . . . .D100-6

Parts D100-7

Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7

Deadbolts . . . . . . . . . . . . . . . . . . . . . . . .D100-7

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-8

Adapters . . . . . . . . . . . . . . . . . . . . . . . . .D100-9

Door/Frame Reinforcements . . . . . . . . . .D100-9

Screws . . . . . . . . . . . . . . . . . . . . . . . . .D100-10

Screw Packs . . . . . . . . . . . . . . . . . . . . .D100-10

Complete Cylinders D100-5



D 111 P F

UL Listing SuffixF = UL Listed






Schlage CFunction

See D100-2

Lock Series









Certification BHMA - ANSI A156.5, 2001, Grade 1 auxiliary lock, Available UL Listed for 3-Hour fire door

Deadbolt 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1" throw

Strike 1-1/8" x 2-3/4", lipless, with box


Door Range 1-3/8" - 1-3/4" standard


Reinforcement Metal dust box reinforcer with three - 3" screws

Trim Ring 1" Wrought brass or bronze, reinforced with security insert

Backset 2-3/8" and 2-3/4" adjustable


FunctionsD100-Series

D100-2

D111P E0171 Classroom FunctionDeadbolt thrown or retracted by key from outside. Inside turn will only retract bolt. Bolt automaticallydeadlocks when fully thrown.

D121P E0161 Single Cylinder x RoseDeadbolt thrown or retracted by key only. Blank plate inside. Bolt automatically deadlocks when fully thrown.

D131P E2141 Double Cylinder*Deadbolt thrown or retracted by key from eitherside. Bolt automatically deadlocks when fullythrown.

D141P E2151 Single Cylinder x TurnDeadbolt thrown or retracted by key or by turn.Bolt automatically deadlocks when fully thrown.

D151 Turn x TurnDeadbolt thrown or retracted by turn unit fromeither side. Application for shelters. Boltautomatically deadlocks when fully thrown.

BHMA / ANSI A156.5, 2001, Grade 1

Bored Deadbolt Locks

FALCON ANSI

* Caution: Double cylinder locks on residences and any door, in any structure,which is used for egress are a life safety hazard in times of emergency and their useis not recommended. Installation should be in accordance with existing codes only.


Complete Locks • D100-Series

D100-3

Outside Cylinder Trim Inside Cylinder Trim Rose and Turn

Notes: 1) Split finishes are priced at the highest finish price.2) Keying options: see D100-53) ‘F’ suffix must be added for UL product.

D100 Series

Designs and Finishes

Function Description 626 605 606 625 613

Single Cylinder FunctionsD111P Classroom Function $122.00 $128.00 $138.00D121P Single Cylinder x Blank RoseD141P Single Cylinder x Turn 108.00 114.00 124.00

Double Cylinder Functions

CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

D131P Cylinder x Cylinder $138.00 $144.00 $154.00Non-Keyed FunctionsD151 Turn x Turn $89.00 $95.00 $105.00


D100 Series • Options

D100-4

Deadbolts with Locks

BacksetAdd to

Description HSG Dia Specify Lock PriceSquare corner, 1-1/8" x 2-1/4", standard 30-256

2-3/8" or Square corner, 1" x 2-1/4" 30-1762-3/4" 1/4" Radius round corner, 1" x 2-1/4" 1" 30-178 N/C

Circular, Drive-In bolt, 626 only 30-257For UL Listed Locks

2-3/8" or Square corner, 1-1/8" x 2-1/4", standard 30-1742-3/4" UL Square corner, 1" x 2-1/4" 1" 30-172 N/C

Circular, Drive-In bolt, 626 only 30-259



Drive-In thimble strike, 1-3/16" dia. 1" 10-064 N/CANSI, 1-1/4" x 4-7/8", with box 1-1/8" 10-087 $6.20Full Lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box 1-5/16" 10-092Square Corner, 1-1/8" x 2-3/4", standard, no box 10-094Full Lip, square corner, 1-5/8" x 2-1/4", no box 10-095 N/C1-1/8" square corner and strike

–005075

Security strike 030290 8.30

Square Corner 1/4" Radius Drive-In

10-094 10-087 10-095 10-092


Options • D100 Series

D100-5

Small FormatInterchangeable Core

Notes: 1) Split finishes are priced at the highest finish price.2) Key section must be specified and applicable charges for restricted sections will be applied. See CYL-3.3) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details

Small Format IC




Example: D111GD6 $39.00Small format core (Best Style) * BB Suffix

Example: D111BB6Small format construction core ** H Suffix 28.40

Example: D111HD6Less Small format core B Suffix N/C

Example: D111BDSmall format disposable core BDC Suffix 3.50

Example: D111BDC

* Keying must be specified** Locks are assessed one non-refundable handling charge (50-231F) per core.



D100-6



Less deadbolt LLL for deadbolt suffixExample: D111P 605 LLL 10-094 $9.40

Less strike LLL for strikeExample: D111P 605 30-257 LLL 3.10

Less conventional cylinder L suffixExample: D111L 15.30

Less conventional cylinder D131 L suffixExample: D131L 30.60




STDExample: D111P6 pinned cylinder P6 Suffix N/C

Example: D111P67 pinned cylinder P7 Suffix

$11.00(Not available on D131) Example: D111P76 pinned Competitor keyway cylinders* P6 Suffix

Example: D111P6 (0 Bitted, KD, KA4 only) N/CSchlage C (6 pin only) CP6 Suffix

Example: D111CP6 (All other keying, not listed above)

Conventional Cylinders and Lock Less Components

D100-Series Complete Conventional CylindersCylinder Mechanism Part Number Price Each

5 Pin Cylinder - D111, D141 Q500-0645 Pin Cylinder - D121 Q500-0665 Pin Cylinder - D131 Q500-070 $38.00 6 Pin Cylinder - D111, D141 Q500-0216 Pin Cylinder - D121 Q500-0586 Pin Cylinder - D131 Q500-0547 Pin Cylinder - D111, D141 Q500-046

51.007 Pin Cylinder - D121 Q500-059

* Competitor keyways are furnished 0 bitted, unless otherwise specified. Not available Master keyed, except Schlage C

Notes: 1) Finishes: 606 and 626 only2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections see Cyl-3 for charge. See Restricted Keyway Policy (p.8) for standard keyways and



Parts • D100-Series

D100-7

TrimPart Number Specify Finish Description Price EachB302-041 • Rose and Turn $31.80B302-045 • Rose and Turn (D111) 31.8012-626 • Blank Rose (D121) 17.30

B600-018 • Mounting plate for rose and rose & turn 31.80

Rose and Turn Mounting Plate Rose

Note: 1) For trim rings and inserts see Cylinders: D100

Note: 2) UL deadbolts not available as parts.

DeadboltsPart Number Specify Finish Housing Diameter Description Price EachQ330-256 • Square corner, 1-1/8" x 2-1/4" faceplateQ330-176 • Square corner, 1" x 2-1/4" faceplate $14.80Q330-178 • 1/4" radius corner, 1" x 2-1/4" faceplateQ330-257 626 1" circular drive-in, 626 only

2-3/8" or 2- 3/4"Universal

Trim, Deadbolts, Cylinders



Strikes , AdaptersD100 Series • Parts

D100-8

StrikesPart Specify Price

Number Finish Description Lip Length Each

10-064 • Drive-In, thimble strike, 1-3/16" deep - $11.9010-087 • ANSI, 1-1/4" x 4-7/8, with box 1-1/8" 16.2010-094 • Square corner, 1-1/8" x 2-3/4", no box - 12.3010-092 • Full lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box

1-5/16" 7.6010-095 • Full lip, square corner, 1-5/8" x 2-1/4", no box

B520-283 - Box for 10-094 standard strike - 0.68J250-028 2" strike mounting screws 0.78005075 • Security Strike

-6.80

030290 • 1-1/8” Square corner T-Strike 13.90

10-064 10-087 10-092 10-094 10-095

38-031 B520-649

AdaptersPart Specify Price Each

Number Finish Description (per finish)

605 606626 625 613

38-031 • 2-1/2" diameter adapter ring for 2-1/8" door prep, for under cylinder $10.10 $12.10 $14.10B520-649 • Trim ring w/shield for D131/D141 13.40 15.40 17.40B520-650 • Trim ring w/shield for IC functions 13.40 15.40 17.4036-071 1-3/8” IC Core thin door shim kit, contains 36-066 & 36-068 10.80 12.80 14.80

B520-650


D100-9

ScrewsDescription Application Price Each

(Order in Part Specify multiples

Number Finish Size Type Use Door Thickness of 100)

Keyed, Single Conventional Cylinder

B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 1-3/4" B600-101 1/4"-28 x 2.425" POH mach. Mounting over 1-3/4" $1.60B600-066 • 6-32 x 1/4" PH mach. Turn - B520-298 10-32 x 3/8" PH mach. Anti-pry shield - Keyed, Single SFIC Cylinder

B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 2-1/4"$1.60B600-066 • 6-32 x 1/4" PH mach. Turn -

Keyed, Double Conventional Cylinder

B600-047 1/4"-28 x 3-13/16" PH mach. Mounting 1-3/8" - 1-3/4" B600-078 1/4"-28 x 3-29/64" PH mach. Mounting over 1-3/4" $1.60B520-298 10-32 x 3/8" PH mach. Anti-pry shield - Keyed, Double SFIC Cylinder

B600-053 1/4"-28 x 3-61/64" PH mach. Mounting 1-3/4" - 2-1/4" $1.60B520-298 10-32 x 3/8" PH mach. Anti-pry shield -All Functions

C603-897 • #8 x 3/4" PFH combo Deadbolt & strike - J520-028 #8 x 2" PFH wood 2" strike screw - $0.82R525-256 #12 x 3" PFH wood 3" metal dust box -

Parts • D100-SeriesScrews

Screw PacksPart Specify Price

Number Finish Door Thickness Contents Each


61-500 • 1 3/8" – 1 3/4" (1) B600-018(2) B600-100 $10.50(2) B600-066(4) C603-897

61-501 • over 1 3/4" – 2 1/4" (1) B600-018(2) B600-101 $10.50(2) B600-066(4) C603-897

Keyed, Single SFIC Cylinder

61-500 • 1 3/8" – 2" (1) B600-018(2) B600-100 $10.50(2) B600-066(4) C603-897


61-502 • 1 3/8" – 1 3/4" (2) B600-047 $7.40(4) C603-897

61-503 • over 1 3/4" – 2 1/4" (2) B600-078 7.40(4) C603-897

Keyed, Double SFIC Cylinder

61-507 • 1 3/8" – 2" (2) B600-053 $7.40(4) C603-897

Price Book 108Effective January 31, 2011 • Rev. 1/11D100-10

Notes


Introduction D200-Series

D200-1

Table of Contents

Function Chart D200-2

Complete Lock Pricing D200-3

Options D200-4

Deadbolts . . . . . . . . . . . . . . . . . . . . . . . .D200-4

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-4

Conventional Cylinder Options . . . . . . . .D200-5

Small Format Interchangeable Cores . . .D200-5

Small Format Construction Cores . . . . . .D200-5

Locks Less Components . . . . . . . . . . . .D200-6

Parts D200-7

Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7

Deadbolts . . . . . . . . . . . . . . . . . . . . . . . .D200-7

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-8

Adapters . . . . . . . . . . . . . . . . . . . . . . . . .D200-9

Door/Frame Reinforcements . . . . . . . . . .D200-9

Screws . . . . . . . . . . . . . . . . . . . . . . . . .D200-10

Screw Packs D200-10

Complete Cylinders D200-5



D 211 P F

UL Listing SuffixF = UL Listed






Schlage CFunction

See D200-2

Lock Series









Certification BHMA - ANSI A156.5, 2001, Grade 2 auxiliary lock, Available UL Listed for 3-Hour fire door

Deadbolt 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1" throw

Strike 1-1/8" x 2-3/4", lipless, with box




Reinforcement Metal dust box reinforcer with three - 3" screws

Trim Ring 1" Wrought brass or bronze, reinforced with security insert

Backset 2-3/8" and 2-3/4" adjustable


D200 Series Functions

D211P E0172 Classroom FunctionDeadbolt thrown or retracted by key from outside. Inside turn will only retract bolt. Bolt automaticallydeadlocks when fully thrown.

D221P E0162 Single Cylinder x RoseDeadbolt thrown or retracted by key only. Blank plate inside. Bolt automatically deadlocks when fully thrown.

D231P E2142 Double Cylinder*Deadbolt thrown or retracted by key from eitherside. Bolt automatically deadlocks when fullythrown.

D241P E2152 Single Cylinder x TurnDeadbolt thrown or retracted by key or by turn.Bolt automatically deadlocks when fully thrown.

D251 Thumbturn x ThumbturnDeadbolt thrown or retracted by turn unit fromeither side. Application for storm shelters. Boltautomatically deadlocks when fully thrown.

D261 E2192 Thumbturn, Inside OnlyDeadbolt thrown or retracted by turn unit only. Nooutside trim. Bolt automatically deadlocks whenfully thrown.

D261M E01112 Thumbturn, Inside x RoseDeadbolt thrown or retracted by turn unit only.Outside blank rose. Bolt automatically deadlockswhen fully thrown.

D271 Thumbturn x Occupancy IndicatorDeadbolt thrown or retracted by turn unit only.Occupancy indicator on outside (reads either in useor vacant with color coding). Bolt automaticallydeadlocks when fully thrown.

BHMA / ANSI A156.5, 2001, Grade 2

Bored Deadbolt Locks

FALCON ANSI



D200-3

Complete Locks • D200-Series

Outside Cylinder Trim Rose and Turn

Notes: 1) Split finishes are priced at the highest finish price.2) D271 Occupancy Indicator deadbolt is shipped with emergency key (61-509) and instructions.3) ‘F’ Suffix must be added for UL product

D200 Series

Designs and Finishes


KeylessD251 Turn x TurnD261 Turn, Inside Only $59.00 $65.00 $75.00D261M Turn , Inside x RoseD271 Turn, Inside x Occupancy Indicator 60.00 66.00 76.00Single Cylinder FunctionsD211P Classroom Function $80.00 $86.00 $96.00D221P Single Cylinder x Rose $77.00 $83.00 $93.00D241P Single Cylinder x TurnDouble Cylinder Functions

CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

D231P Double Cylinder* $100.00 $106.00 $116.00D231P Double Cylinder*

Inside Cylinder Trim


D200 Series • Bolt & Strike Options

D200-4

Deadbolts with Locks

BacksetAdd to

Description HSG Dia Specify Lock PriceSquare corner, 1-1/8" x 2-1/4", standard 30-253

2-3/8" or Square corner, 1" x 2-1/4" 30-1752-3/4" 1/4" Radius round corner, 1" x 2-1/4" 1" 30-177 N/C

Circular, Drive-In bolt, 626 only 30-254For UL Listed Locks

2-3/8" or Square corner, 1-1/8" x 2-1/4", Standard 30-1732-3/4" UL Square corner, 1" x 2-1/4" 1" 30-171 N/C

Circular, Drive-In bolt, 626 only 30-258

Square Corner Round Corner Drive-In


10-064 10-087 10-092 10-094 10-095


Drive-In thimble strike, 1-3/16" dia. 1" 10-064 N/CANSI, 1-1/4" x 4-7/8", with box 1-1/8" 10-087 $6.20Full Lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box 1-5/16" 10-092Square Corner, 1-1/8" x 2-3/4", standard, no box 10-094Full Lip, square corner, 1-5/8" x 2-1/4", no box 10-095 N/C1-1/8" square corner and strinke – 005075Security strike 030290 8.30


Options • D200-Series

D200-5

Small FormatInterchangeable Core

Notes: 1) Split finishes are priced at the highest finish price.2) Key section must be specified and applicable charges for restricted sections will be applied. See CYL-3Handling charge (50-231F) will be charged per core. See page CYL-11 for details.

3) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details

Small Format IC




Example: D211GD6 $39.00Small format core (Best Style) * BB Suffix

Example: D211BB6Small format construction core ** H Suffix 28.40

Example: D211HD6Less Small format core B Suffix

N/CExample: D211BDSmall format disposable core BDC Suffix 3.50

Example: D211BDC




D200-6

Conventional Cylinders and Lock Less Components



Less deadbolt LLL for deadbolt suffixExample: D211P 605 LLL 10-094 $9.40

Less strike LLL for strikeExample: D211P 605 30-171 LLL 3.10

Less conventional cylinder L suffixExample: D211L 15.30

Less conventional cylinder D231 L suffixExample: D231L 30.60



(per core)5 pinned cylinder P Suffix STD

Example: D211P6 pinned cylinder P6 Suffix N/C

Example: D211P67 pinned cylinder P7 Suffix $10.90(Not available on D231) Example: D211P7 6 pinned Competitor keyway cylinders* P6 Suffix

Example: D211P6 (0 Bitted, KD, KA4 only)Schlage C (6 pin only) CP6 Suffix N/C

Example: D211CP6 (All other keying, not listed above)

Notes: 1) Finishes: 606 and 626 only2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections see Cyl-3 for charge. See Restricted Keyway Policy (p.8) for standard keyways and



D200-Series Complete Conventional CylindersCylinder Mechanism Part Number Price Each

5 Pin Cylinder - D211, D241 Q500-0675 Pin Cylinder - D221 Q500-0695 Pin Cylinder - D231 Q500-0726 Pin Cylinder - D211, D241 Q500-010 $38.00

6 Pin Cylinder - D221 Q500-0566 Pin Cylinder - D231 Q500-0127 Pin Cylinder - D211, D241 Q500-014 51.007 Pin Cylinder - D221 Q500-057


D200- 7

TrimPart Number Specify Finish Description Price EachB302-041 • Rose and Turn $31.80B302-045 • Rose and Turn (D211) 31.8012-626 • Blank Rose (D221) 17.30

B600-018 • Mounting plate for rose and rose & turn 31.80

Rose and Turn Mounting Plate Rose

DeadboltsPart Number Specify Finish Housing Diameter Description Price EachQ330-253 • Square corner, 1-1/8" x 2-1/4" faceplateQ330-175 • Square corner, 1" x 2-1/4" faceplate $14.80Q330-177 • 1/4" radius corner, 1" x 2-1/4" faceplateQ330-254 626 1" circular drive-in, 626 only

2-3/8" or 2- 3/4"Universal

Trim, Deadbolts, Cylinders


Parts • D200-Series

Note: 1) UL deadbolts not available as parts.

Keys - Emergency For Occupancy IndicatorPart Number Description Price Each

61-509 Emergency Release Key – Standard Size for Occupancy Indicator $6.5061-510 Emergency Release Key – Large Size for Occupancy Indicator 13.20


D200 Series • Parts Strikes , Adapters

10-064 10-087 10-094 10-094 10-095

StrikesPart Specify Price

Number Finish Description Lip Length Each

10-064 • Drive-In, thimble strike, 1-3/16" deep - $11.9010-087 • ANSI, 1-1/4" x 4-7/8, with box 1-1/8" 16.2010-094 • Square corner, 1-1/8" x 2-3/4", no box - 12.3010-092 • Full lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box

1-5/16" 7.6010-095 • Full lip, square corner, 1-5/8" x 2-1/4", no box

B520-283 - Box for 10-094 standard strike - 0.68J250-028 2" strike mounting screws 0.78005075 • Security Strike

-6.80

030290 • 1-1/8” Square corner T-Strike 13.90

38-031 B520-649

AdaptersPart Specify Price Each

Number Finish Description (per finish)

605 606626 625 613

38-031 • 2-1/2" diameter adapter ring for 2-1/8" door prep, for under cylinder $10.10 $12.10 $14.10B520-649 • Trim ring w/shield for D131/D141 13.40 15.40 17.40B520-650 • Trim ring w/shield for IC functions 13.40 15.40 17.4036-071 1-3/8” IC Core thin door shim kit, contains 36-066 & 36-068 10.80 12.80 14.80

B520-650


D200-9

ScrewsDescription Application Price Each

(Order in Part Specify multiples

Number Finish Size Type Use Door Thickness of 100)


B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 1-3/4" B600-101 1/4"-28 x 2-1/2" POH mach. Mounting over 1-3/4" $1.60B600-066 • 6-32 x 1/4" PH mach. Turn - B520-298 10-32 x 3/8" PH mach. Anti-pry shield - Keyed, Single SFIC Cylinder

B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 2-1/4" $1.60B600-066 6-32 x 1/4" PH mach. Turn - Keyed, Double Conventional Cylinder

B600-047 1/4"-28 x 3-13/16" PH mach. Mounting 1-3/8" - 1-3/4" B600-078 1/4"-28 x 3-29/64" PH mach. Mounting over 1-3/4" $1.60B520-298 10-32 x 3/8" PH mach. Anti-pry shield - Keyed, Double SFIC Cylinder

B600-053 1/4"-28 x 3-61/64" PH mach. Mounting 1-3/4" - 2-1/4" $1.60B520-298 10-32 x 3/8" PH mach. Anti-pry shield -Keyless, D261

B600-066 • 6-32 x 1/4" PH mach. Turn - B600-048 10-32 x 1/2" PH mach. Mounting plate - $1.60F506-359 #8 x 3/4" RH wood Mounting plate 0.60Keyless, D261M, D271

B520-662 10-32 x 1-3/4" POH mach. Mounting -B520-663 10-32 x 1-3/4" POH mach. Mounting - $1.60B600-066 • 6-32 x 1/4" PH mach. TurnAll Functions

C603-897 • #8 x 3/4" PFH combo Deadbolt & strike - J520-028 #8 x 2" PFH wood 2" strike screw - $0.82R525-256 #12 x 3" PFH wood 3" metal dust box -

Screws Parts • D200-Series


Screw PacksPart Specify Price

Number Finish Door Thickness Contents Each

Keyless, D261

61-506 • 1 3/8" – 2 1/4" (2) B600-048(2) F605-359 $12.60(4) C603-897(1) B600-018(2) B600-066

Keyless, D261M, D271

61-504 • 1-3/8" - 1-3/4" (2) B520-662(4) C603-897 $16.50(2) B600-066(4) B600-018

61-505 • 1-3/4" - 2-1/4" (2) B520-663(4) C603-897 16.50(2) B600-066(4) B600-018


61-500 • 1 3/8" – 1 3/4" (1) B600-018(2) B600-100 $10.50(2) B600-066(4) C603-897

61-501 • over 1 3/4" – 2 1/4" (1) B600-018(2) B600-101 10.50(2) B600-066(4) C603-897

Keyed, Single SFIC Cylinder

61-500 • 1 3/8" – 2" (1) B600-018(2) B600-100 $10.50(2) B600-066(4) C603-897


61-502 • 1 3/8" – 1 3/4" (2) B600-047 $7.40(4) C603-897

61-503 • over 1 3/4" – 2 1/4" (2) B600-078 7.40(4) C603-897

Keyed, Double SFIC Cylinder

61-507 • 1 3/8" – 2" (2) B600-053 $7.40(4) C603-897

D200 Series • Parts Screw Packs


Introduction

H-1

H-Series

Table of Contents

Function Chart H-2

Complete Lock Pricing H-3

Options H-4

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-4

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-4

Parts H-5

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5

Chassis Assemblies . . . . . . . . . . . . . . . . . . . .H-5

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5

Miscellaneous Parts . . . . . . . . . . . . . . . . . . . .H-5

Complete Conventional Cylinders H-6

Conventional Cylinder Options . . . . . . . . . . .H-5

Small Format Interchangeable Cores . . . . . .H-5

Small Format Construction Cores . . . . . . . . .H-5

Locks Less Components . . . . . . . . . . . . . . . .H-5

Tactile Warning Strip (not available in 613) . .H-5



H 101 P D

Latch SuffixD = Deadlatch





Schlage CFunction

See H-2

Lock Series

For SFIC option, 6 or 7 pin must be specifiedSFIC = Small Format (Best® Style) Interchangeable Core




630 (US32D) Satin Stainless


Certification UL Listed for 1-1/2-Hour fire door

Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw

Strike 1-1/8" x 2-3/4" lipless and 1-1/8" x 2-3/4" T strike


Door Range 1-3/8" - 2" standard


Backset 2-3/4"

H-Series • Functions

Price Book 108Effective January 31, 2011 • Rev. 1/11H-2

H101 F95 Entry/Single LockLatch bolt operated by knob or leverfrom either side. Rotating turn frominside or key from outside extends dead bolt. Dead boltand latch bolt retract by rotating insideknob or lever.

H451 F100 Hotel/Motel LockDeadlocking latch bolt operated by keyoutside or rotating inside knob. Outsideknob rigid. Rotating turn from inside oremergency key outside extends deadbolt. Both dead bolt and deadlockinglatch bolt retract by rotating insideknob. Depressing spanner button ininside knob operates visual indicatorshutting out all keys except emergencykey. Rotation of inside spanner buttonprovides lockout feature.

H461 F101 Hotel/Motel LockDeadlocking latch bolt operated by keyoutside or rotating inside knob. Outsideknob rigid. Rotating turn from insideextends dead bolt and changes visualmessage on outside from vacant tooccupied. Both dead bolt anddeadlocking latch bolt retract byrotating inside knob. Depressingspanner button in inside knob operatesvisual indicator shutting out all keysexcept emergency key. Rotation ofinside spanner button provides lockoutfeature.

H511 F96/97 Entry/Double LockingDead bolt thrown or retracted by key inupper lock from outside or by insideturn. Deadlocking latch retracted by keyin outer knob when locked by pushingbutton in inner knob. Outer knob maybe fixed in locked position by rotatingbutton. Dead bolt and latch boltretracted by rotating inside knob.

Interconnected Locks

FALCON ANSI

Interconnected Locks

FALCON ANSI


Standard Duty Tubular Locksets

H-3

Interconnected Locks • H-Series

*Available with lever inside and knob outside only. Specify both outside and inside designs.† When Dane 630 is ordered for exterior, Dane 626 is provided for interior.

Note: 1) Includes two (2) guest keys and instruction plate (A03040-000-00). Does not include master keying.

Interconnected LocksDesigns and Finishes

E H D

605 613, 630 605 613, 630†

Functions DescriptionH101PD Passage Deadlock $280.00 $310.00 $305.00 $335.00H451PD* Hotel 360.00 390.00 392.00 422.00H461PD* Hotel with Indicator 373.00 403.00 405.00 435.00H511PD* Entry/Office 334.00 364.00 363.00 393.00

E (Elite) H (Hana) D (Dane)


Deadbolts/Spring Latches (H101)SpecifyCombo Add to Lock

Backset Deadbolt Deadlatch Number Price74435 57435 01-062

2-3/4" 74430 57430 01-06374431 57431 01-064 N/C74420 57420 01-066

2-3/8" 74425 57425 01-065 74421 57421 01-067

Deadbolts/Deadlatches (H511)SpecifyCombo Add to Lock


2-3/4" 74430 57430 01-06974431 57431 01-070 N/C74420 57420 01-072

2-3/8" * 74425 57425 01-071 74421 57421 01-073

Deadbolts/Deadlatches (H451/461)SpecifyCombo Add to Lock


2-3/4" 74430 57430 01-07574431 57431 01-076 N/C74420 57420 01-078

2-3/8" * 74425 57425 01-077 74421 57421 01-079

Strikes with LocksSpecifyCombo Add to Lock

Latch strike Deadbolt strike Number Price01-046 010018-1 01-080 01-048 5051-1 01-086 5164 010018-1 01-082

01-049 5051 01-084 N/C01-049 010018-1 01-083 01-048 010018-1 01-085

005099-000-30


H-Series • Latch and Strike Options

* 2-3/8" backset is furnished as a 1" faceplate standard.


Latches and Strikes • H-Series

H-5

Deadlatch Strikes Finishes: 605, 613, 626, 630

Description Lip Length Specify Add to Lock Price

ANSI, 1-1/4" x 4-7/8" 1-5/16" 005164-000 $11.40 Square Corner, T-strike, 1-1/8" x 2-3/4" ** Q001-046 1/4" Radius round corner, full lip 1-5/8" x 2-1/4" ** 1" Q001-048 3.60Square corner, full lip 1-5/8" x 2-1/4" ** Q001-049 ANSI dust box 1" deep, steel - 005099-000-30 2.60

LatchesFinishes: 605, 613, 630

Latch Face Backset & Price

2-3/8" 2-3/4" Price1" Spring Latch A57420-000 A57430-0001" Deadlatch A57420-00D A57430-00D1" Deadlatch (H451, H461) A57620-00D A57630-00D1" Spring Latch - 1/4" Rad. A57420-000 A57431-000 $23.301" Deadlatch - 1/4" Rad. A57421-00D A57431-00D1" Deadlatch - 1/4" Rad. (H451, H461) A57621-00D A57631-00D1-1/8"" Spring Latch A57625-000 A57635-0001-1/8" Deadlatch A57425-00D A57435-00D1-1/8" Deadlatch (H451, H461) A57625-00D A57635-00D

BoltsFinishes: 606, 613, 630

Latch Face Backset & Price

2-3/8" Price 2-3/4" Price1" Deadbolt A74420-000 A74430-0001" Deadbolt - 1/4" Rad. A74421-000 $19.70 A74431-000 $26.901-1/8" Deadbolt A74425-000 A74435-000Drive-In* A76429-000 A76439-000

ScrewsPart Number Description Finishes Size List Price024416-012 Latch and strike screws 605, 606, 613, 626, 630 8-32 x 3/4"combo $ 0.20021164-016 ANSI strike screws 605, 606, 613, 626, 630 12-24 x 1" combo 0.40

*Available in 626 only.

** Not available in 630.


H-Series • Cylinders & Options

H-Series • Complete Cylinders Cylinder Mechanism Part Number Price Each

5-pin cylinder H511 knobs A300405-pin cylinder H all other functions & designs A30028 $40.006-pin cylinder H511 knobs A30040-016-pin cylinder H all other functions & designs A30028-01

* Cylinders are furnished G keyway, keyed differently unless otherwise specified.** Restricted sections see CYL-3. See Keys & Keying for standard keyways. Contact 877-671-7011 for availability.Notes: 1) Finishes: 606 and 626 only.

2) Specify keyway

Notes: 1) Finishes: 606 and 626 only2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections see Cyl-3 for charge. See Restricted Keyway Policy (p.8) for standard keyways andpolicy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.

Small Format Interchangeable Core and Small Format Construction Core Description Specify Add to Lock Price (per core)

Small format core * G SuffixExample: H101GD6

Small format core (Best Style) * BB Suffix $39.00

Example: H101BB6Small format construction core ** H Suffix 28.40Example: H101HD6Less Small format core B Suffix N/CExample: H101BDSmall format disposable core BDC Suffix 3.50Example: H101BDC

Notes: 5) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details

Locks Less Components Description Specify Deduct from Lock Price per latch or strike

Less standard cylinder L suffixExample: H101LD DAN $40.00

Less latch - per latch LLL suffixExample: H101PD DAN 626 LLL/01-080 13.00

Less strike - per strike LLL suffixExample: H101PD DAN 626 01-062 LLL 2.60

Tactile Warning (Abrasive coat)Description Specify Add to Lock Price

Abrasive Preface the design code with 6 $44.20Example: 6DA for DAN

Note: 1) Outside lever only is coated unless otherwise specified.2) Not available in 613



(per core)5 pinned cylinder P Suffix STDExample: H101P6 pinned cylinder P6 Suffix

Example: H101P66 pinned Competitor keyway cylinders* P6 Suffix N/C

available on H101, H511 only Example: H101P6 (0 Bitted, KD, KA4 only)Schlage C (6 pin only) CP6 Suffix

available on H101, H511 only Example: H101CP6 (All other keying, not listed above)




Introduction MA-Series

MA-1

Table of Contents

Function Chart MA-2

MA Complete Lock Pricing MA-4

Option

Conventional Cylinder Options . . . . . . . . . .MA-7

SFIC Cylinder Options . . . . . . . . . . . . . . . .MA-7

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9

Locks Less Components . . . . . . . . . . . . . .MA-12

Non-Standard Door Thickness . . . . . . . . .MA-12

Abrasive Coating and Knurling . . . . . . . . .MA-12

Lead Wrap . . . . . . . . . . . . . . . . . . . . . . . . .MA-12

MA Series Parts

Armor Fronts (Scalps) . . . . . . . . . . . . . . . . .MA-9

Lock Cases . . . . . . . . . . . . . . . . . . . . . . . .MA-10

Knob & Levers . . . . . . . . . . . . . . . . . . . . . .MA-10

Roses and Escutcheons . . . . . . . . . . . . . .MA-11

Screws and Screw Packs . . . . . . . . . . . . .MA-11

Misc. Parts . . . . . . . . . . . . . . . . . . . . . . . . .MA-11

Trim Packs . . . . . . . . . . . . . . . . . . . . . . . .MA-13

Full Body Mortise Deadlocks MA-14



MA 501 P


Cylinder SuffixB = Less SFICBB = With SFIC Core (Best)BDC = Disp. Const. CoreG = With SFIC Core (Falcon)H = With SFIC Keyed Const.



to 6 chambersP7 = 7-Pin Cylinder


Schlage CFunction

See MA-2

Lock Series










Certification ANSI A156.13, Series 1000, Grade 1 Operation and Security, UL Listed for 3-Hour fire door

with SFIC Interchangeable Core Cylinders: Grade 3 Security

Latch 2 piece stainless steel anti-friction bolt 3/4" projection.

Strike 1-1/4" x 4-7/8", ANSI, Square corner, with dust box




Backset 2-3/4"


MA-Series • Functions

MA-2

MA101 F01 Passage/Closet LatchsetLatch bolt by knob/levers at all times.

MA161 F31 Connecting Room/Exit LatchLatch bolt operated by knob/lever frominside. No trim outside. Auxiliary deadlatch.

MA301 F02 Privacy LockLatch bolt by knobs/levers either side,dead bolt by turn inside or emergencyrelease outside.

MA311 F19 Privacy, Bedroom or Bath LockLatch bolt by knobs/levers. Dead bolt byturn from inside and emergency releaseoutside. Rotating inside knob/leverretracts both bolts.

MA321 F22 Privacy LockLatch bolt operated by knob/lever fromeither side except when outsideknob/lever is locked by inside T-turn.Operating inside knob/lever, closing dooror operating outside emergency releaseunlocks outside knob/lever.

MA371* F14 Store Door LockLatch bolt by knobs/levers either side.Dead bolt by key from either side.

MA381 F09 Apartment, Exit LockLatch bolt operated by knob/lever fromeither side, except when outsideknob/lever is locked by key from inside.When outside knob/lever is locked, latchbolt is retracted by key from outside orby operating inside lever. Auxiliary deadlatch.

MA411* F30 Asylum LockLatch bolt operated by key from eitherside. Both knobs/levers alwaysinoperative. Auxiliary dead latch.

MA431 F34 Classroom Security Lock withDeadbolt Latch bolt operated by knob/lever fromeither side except when outsideknob/lever is locked from inside oroutside by key. Dead bolt retracted bykey from inside or outside. Operatinginside knob/lever retracts both bolts andunlocks outside. Latch bolt dead lockedwhen dead bolt is thrown.

MA441 F32 Classroom Security LockLatch bolt operated by knob/lever fromeither side except when outsideknob/lever is locked from inside oroutside by key. When outside knob/leveris locked, latch bolt is retracted by keyfrom inside or outside or by operatinginside knob/lever. Auxiliary dead latch.

MA451 F15 Hotel Guest LockLatch bolt operated by key from outsideor by operating inside knob/lever. Outsideknob/lever is always inoperative. Deadbolt projected by turn from inside and allkeys except emergency key are shut out.Operating inside knob/lever retracts bothbolts. Auxiliary dead latch.

MA521 F04 Entry/Office LockLatch bolt operated by knob/lever fromeither side except when outsideknob/lever is made inoperative by buttons in face. When outside knob/lever is locked, latch bolt is retracted by key from outside or by operating inside knob/lever. Auxiliary dead latch.

MA531 F20 Apartment Corridor Door LockLatch bolt operated by knob/lever from either side, except when outside knob/lever is made inoperative by buttons in face. Dead bolt operated by key outside or turn inside. Key outside operates both bolts. Operating inside knob/lever retracts both bolts and outside remains locked. Latch bolt is deadlocked when outside knob/lever is made inoperative or when the dead bolt is projected. When dead bolt is retracted, knob/lever is unlocked by buttons in face.

ANSI A156.13 Series 1000 Grade 1 Operation

Mortise

FALCON ANSI

Mortise

FALCON ANSI



Functions • MA-Series

MA-3

MA541 F21 Entry/Office LockLatch bolt by knobs/levers either side.Dead bolt by key outside or turn inside.

MA551 F06 Holdback LockLatch bolt operated by lever from eitherside except when outside lever is lockedfrom outside by key. Latch bolt can belocked in a retracted position by key.When outside lever is locked, latch boltis retracted by key from outside or byoperating inside lever unless latch bolthas been locked in a retracted position.Auxiliary dead latch.Note: Chassis is handed

MA561 F05 Classroom LockLatchbolt operated by knob/lever from either side except when outside knob/lever is locked by key. When outside knob/lever is locked, latchbolt is retracted by key from outside or by operating inside knob/lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside knob/lever always free for immediate exit.

MA571 F13 Dormitory or Exit LockLatch bolt operated by knob/lever from either side. Dead bolt projected by key from outside and turn from inside. Operating inside knob/lever retracts both bolts and unlocks outside.

MA581 F07 Storeroom LockLatch bolt operated by key from outside or by operating inside knob/lever. Outside knob/lever is always inoperative. Auxiliary dead latch.

MA621 F08/F10 Front Door / Apartment CorridorLatch bolt is operated by knob/lever from either side, except when outside knob/lever is made inoperative bybuttons in face. Dead bolt is operated by turn inside. Key outside operates both bolts.

MA641 Dormitory LockLatch bolt by knob/lever inside and key outside. Inside knob/lever free. Outside knob/lever rigid. Dead bolt by key outside or T-turn inside. Rotating insideknob/lever retracts both bolts. Deadlocking latch.

MA851 Storeroom-Fail Safe ELLatch bolt operated by knob/lever fromeither side except when outer knob/leveris electrically locked. When outerknob/lever is locked, latch bolt retractedby key in cylinder outside.Deadlocking latch.

MA881 Storeroom-Fail Secure EULatch bolt operated by knob/lever frominside except when outer knob/lever iselectrically unlocked, then latch boltfrom either side. When locked, key incylinder outside retracts latch bolt.Deadlocking latch.

MA911 F29 Classroom Dead LockKey from outside operates dead bolt. Turn from inside retracts but does not project dead bolt.

MA921 F18 DeadlockDead bolt by key outside only.

MA931* F16 DeadlockDead bolt by key from either side.

MA941 F17 DeadlockDead bolt by key outside or turn inside.

MA12/MA18 Dummy TrimSingle or double available.Single (MA12)Double (MA18)

ANSI A156.13 Series 1000 Grade 1 Operation

Mortise

FALCON ANSI

Mortise

FALCON ANSI



MA-Series • Complete Locks

MA-4

HG (Hana-Gala) HN (Hana-Napa)

Note: 1) Specify 12 or 24 VDC.

MA Knob Styles – Hana Designs and Finishes

HANA – GALA HANA – NAPA605 606 605 606

Function Description 626 625 613 630 626 625 613 630

Single Cylinder FunctionsMA521P Entry/OfficeMA541P Entry/OfficeMA551P HoldbackMA561P Classroom $446.00 $458.00 $476.00 $459.00 $471.00 $489.00MA571P Dormitory ExitMA581P StoreroomMA531P Apartment CorridorMA621P Front Door 459.00 471.00 489.00 465.00 477.00 495.00MA641P DormitoryMA451P Hotel 507.00 519.00 537.00 518.00 530.00 548.00MA851P Elect. Storeroom (Fail Safe) 1

896.00 908.00 926.00 904.00 916.00 934.00MA881P Elect. Storeroom (Fail Secure) 1

Double Cylinder FunctionsMA371P* Store DoorMA381P Apartment/Exit MA411P* Asylum $509.00 $521.00 $539.00 $515.00 $527.00 $545.00MA431P Classroom Security with deadboltMA441P Classroom Security

* CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

Non-Keyed FunctionsMA101 Passage $309.00 $321.00 $339.00 $318.00 $330.00 $348.00MA161 Exit/ Connecting 329.00 341.00 359.00 339.00 351.00 369.00MA301 PrivacyMA311 Privacy 386.00 398.00 416.00 402.00 414.00 432.00MA321 PrivacyMA12 Half Dummy 120.00 126.00 136.00 124.00 130.00 140.00MA18 Full Dummy 239.00 251.00 269.00 249.00 261.00 279.00


Complete Locks • MA-Series

MA-5

Grade 1 Mortise Locks with Cast/Forged or HeavyWrought Trim ANSI-A156.13, SERIES 1000, GRADE 1

AG (Avalon-Gala) DG (Dane-Gala)

QG (Quantum-Gala) SG (Sutro-Gala)Cast Lever

Notes: 1) Specify 12 or 24 VDC.

MA Lever/Rose StylesDesigns and Finishes

AG DG QG SG605 606


Single Cylinder FunctionsMA521P Entry/OfficeMA541P Entry/OfficeMA551P HoldbackMA561P Classroom $503.00 $515.00 $533.00MA571P Dormitory ExitMA581P StoreroomMA531P Apartment CorridorMA621P Front Door 517.00 529.00 547.00MA641P DormitoryMA451P Hotel 560.00 572.00 590.00

MA851P Elect. Storeroom (Fail Safe)1

929.00 941.00 959.00MA881P Elect. Storeroom (Fail Secure)1

Double Cylinder FunctionsMA371P* Store DoorMA381P Apartment /Exit MA411P* Asylum $557.00 $569.00 $587.00MA431P Classroom Security with deadboltMA441P Classroom Security


Non-Keyed FunctionsMA101 Passage $392.00 $404.00 $422.00MA161 Exit/Connecting 407.00 419.00 437.00MA301 PrivacyMA311 Privacy 456.00 468.00 486.00MA321 PrivacyMA12 Half Dummy 162.00 168.00 178.00MA18 Full Dummy 322.00 334.00 352.00


MA-Series • MA Lever Styles

MA-6

Grade 1 Mortise Locks with Cast/Forged or HeavyWrought Trim ANSI-A156.13, SERIES 1000, GRADE 1

AN (Avalon-Napa) DN (Dane-Napa)

QN (Quantum-Napa) SN (Sutro-Napa)Cast Lever

Notes: 1) Specify 12 or 24 VDC.

MA Lever Escutcheon StylesDesigns and Finishes

AN DN QN SN605 606 613

Function Description 626 625 630

Single Cylinder FunctionsMA521P Entry/OfficeMA541P Entry/OfficeMA551P HoldbackMA561P Classroom $530.00 $542.00 $560.00MA571P Dormitory ExitMA581P StoreroomMA531P Apartment CorridorMA621P Front Door 540.00 552.00 570.00MA641P DormitoryMA451P Hotel 588.00 600.00 618.00MA851P Elect. Storeroom (Fail Safe)1

977.00 989.00 1,007.00MA881P Elect. Storeroom (Fail Secure)1

Double Cylinder FunctionsMA371P* Store DoorMA381P Apartment/ExitMA411P* Asylum $583.00 $595.00 $613.00MA431P Classroom Security with deadboltMA441P Classroom Security


Non-Keyed FunctionsMA101 Passage $413.00 $425.00 $443.00MA161 Exit/Connecting 427.00 439.00 457.00MA301 PrivacyMA311 Privacy 477.00 489.00 507.00MA321 PrivacyMA12 Half Dummy 169.00 175.00 185.00MA18 Full Dummy 338 350.00 368.00


Cylinders • MA-Series

MA-7

Conventional Mortise CylindersPins Length Description Number 626 605 606 613 629 630

5 or 6 1-1/8 985 $53.00 $55.001-1/4 Mortise 9861-3/8 987 53.00 55.001-1/2 Mortise 988 63.00 65.00

5, 6, or 7 1-3/4 990 78.00 80.002 992 81.00 83.00

6 1-1/8 2501-1/4 251

6 1-3/8 Mortise, hotel function 252 69.00 71.007 1-3/8 253- 1-1/8 985T- 1-1/4

Mortise, thumbturn986T

83.00 85.00

- 1 984D- 1-1/8 Dummy 985D 32.00 34.00

Small Format Interchangeable Core HousingsCat. Number Length Pins Description 626 605 606 613 629 630

C987-xx 1 3/8" 6 or 7 Mortise $33.00 $35.00C988-xx 1 1/2" 6 or 7 MortiseC990-xx 1 3/4" 6 or 7 Mortise 39.00 41.00 C992-xx 2" 6 or 7 Mortise 41.00 43.00 C977-xx Fits Adams Rite 6 or 7 Mortise, tapered head 35.00 37.00 C997-xx 1 3/8" 6 or 7 Mortise, unassembled, less cam 26.00 28.00 C262-xx 1 5/8" 6 or 7 Mortise, hotel function RH 55.00 57.00 C265-xx 1 5/8" 6 or 7 Mortise, hotel function LH

* Cylinders are furnished 5-pin G keyway, keyed differently unless otherwise specified.** Restricted sections see CYL-3. See keys & keying for standard keyways. Contact 877-671-7011 for availability.*** Hotel mortise cylinder are only offered as Master keyed or 6-pin 0-bitted and must be specified. If not specified, 0-bitted

furnished.

Notes: 1) MA cam provided unless otherwise specified. 2) For 7-pin conventional add $11.003) All mortise cylinders will be furnished with cam 5622-STO, except for MA381 function which will be supplied with 5620-STD and 5621-STD. See CYL-12 for additional available cams.

4) Mortise and rim cylinders are not available in any competitor keyway, except Schlage C.5) 984D, 985D not available in 629 and 630.6) Conventional mortise cylinder with Schlage C keyway are available with the following cams only, 02-069 & A7809.7) Add $9.00 (list) for Falcon restricted keyways. See page 8 for standard keyways. All others are restricted. Falcon conventional cylinder restricted keyways use a unique pin kit (P/N 1417) and cutter wheel for keys.

Notes: 1) All mortise cylinders will be furnished with cam 5622-STD, except for MA381 function which will be supplied with 5620-STD and 5621-STD. See CYL-12 for additional available cams.

2) C977 is only furnished with 012667-001 Adams Rite Cam


MA-Series • Cylinder Options

MA-8

Conventional Cylinder options


(per core)5 pinned cylinder P Suffix STD

Example: MA581P6 pinned cylinder P6 Suffix N/C

Example: MA581P67 pinned cylinder P7 Suffix $11.00

Example: MA581P76 pinned Competitor keyway cylinders* P6 Suffix

Example: MA581P6 (0 Bitted, KD, KA4 only) N/CSchlage C (6 pin only) CP6 Suffix

Example: MA581CP6 (All other keying, not listed above)




Example: MA581GD6Small format core (Best Style) * BB Suffix $39.00

Example: MA581BB6Small format construction core ** H Suffix 28.40

Example: MA581HD6Less Small format core B Suffix N/C

Example: MA581BDSmall format disposable core BDC Suffix 3.50

Example: MA581BDC






Strikes and Armor Fronts • MA-Series

MA-9

MA-Series Strikes with LocksAdd to Lock Price

Description Lip Length Specify 605, 606, 613, 629, 630Standard - 1-3/4" Door Thickness 1-1/4" A8737-1Optional - 2" Door Thickness 1-7/16" A8737-2 N/COptional - 2-1/4" Door Thickness 1-9/16" A8737-3Optional - 2-1/2" Door Thickness 1-11/16" A8737-4Optional - 1-3/4" Door Thickness 7/8" A8737-5

MA-Series Strikes Sold Separately605 606 613

Description Lip Length Specify 626 625 630Standard - 1-3/4" Door Thickness 1-1/4" A8737-1 $16.00 $19.00 $24.00Optional - 2" Door Thickness 1-7/16" A8737-2Optional - 2-1/4" Door Thickness 1-9/16" A8737-3 21.20 24.20 29.20Optional - 2-1/2" Door Thickness 1-11/16" A8737-4Optional - 1-3/4" Door Thickness 7/8" A8737-5

MA-Series Armor Fronts (Scalps) Sold SeparatelyDescription Part Number 626 605 606 613

625 630

MA101, 321 S77801-LLMA521 S77804-LLMA161, 381, 411, 441, 561, 581, 851, 881, 551 S77805-LLMA621 S77811-LL $31.80 $34.80 $39.80MA451, 641 S77815-LLMA911, 921, 931, 941 S77816-LLMA301, 311, 371, 541, 571, 431 S77819-LLMA531 S77820-LL

Notes: 1) Armor front is included in complete MA lock


MA-Series • Cases and Trim

MA-10

MA-Series Lock Case

Part Number Description List Price

A7801-xx MA101 $185.00A7831-xx MA161 175.00A7802-xx MA301A7819-xx MA311 205.00A7822-xx MA321A7814-xx MA371A7809-xx MA381 229.00A7830-xx MA411A7815-xx MA451 260.00A7804-xx MA521 229.00A7820-xx MA531 304.00A7821-xx MA541A7805-xx MA561, 441A7813-xx MA571, 431 229.00A7807-xx MA581A7808-xx MA621A7815-xx MA641 260.00A7806-xx MA551 229.00

A7851-12-xx MA851 12VA7851-24-xx MA851 24V 548.00A7881-12-xx MA881 12VA7881-24-xx MA881 24V

A7829-xx MA911 167.00A7816-xx MA921, 931, 941

MA-Series Lever & Knob Assemblies

Part Number DescriptionList Price

605 606 613626 625 630

AS76029-L/RH Avalon, sectional trimAS76140-L/RH Quantum, sectional trimAS76526-L/RH Sutro, sectional trimAS76280-L/RH Dane, sectional trimAS76100-L/RH Hana, sectional trim $102.00 $105.00 $110.00AE77029-L/RH Avalon, escutcheon trimAE77140-L/RH Quantum, escutcheon trimAE77526-L/RH Sutro, escutcheon trimAE77280-L/RH Dane, escutcheon trimAE77100-L/RH Hana, escutcheon trim

Notes: 1) xx Specify handing: RH= Right hand. LH= Left hand. RR = Right hand reverse. LR = Left hand reverse. (Example: A7801-RH).

2) Does not include armor front

MA-Series RoseList Price

Part Number Description605 606 613

626 625 630S76012 Rose, Gala $26.20 $29.20 $34.20

AS75319 Thumbturn assembly for sectional trim for MA301, MA311 35.60 38.60 43.60MA321 when door thickness is less than 2"

AS76319 Thumbturn Assembly for sectional trim for all functions except 35.60 38.60 43.60MA301, MA311, MA321 when door thickness is less than 2"

AS7653 Emergency Turn for MA301, 311, 321 26.50 29.50 34.50

Notes: 3) Specify finish and handing4) Lever assemblies include one lever assemblies with spring cage.5) Order escutcheon and rose separately

Notes: 6) Specify finish


Trim, Screws and Parts • MA-Series

MA-11

MA-Series Escutcheons

Part Number DescriptionList Price605 606 613

626 625 630AE77012-OP Napa, Outside lever openingAE77012-OC Napa, Outside Cylinder and lever openingsAE77012-OK Napa, Outside Cylinder only opening $61.90 $64.90 $69.90AE77012-OT Napa, Outside Emergency key and lever opening

E77012-IP Napa, Inside lever openingE77012-IB Napa, inside Blank, no lever opening

AE77012-IT Napa, Inside lever opeining with thumbturn attached 72.30 75.30 80.30E77012-IC Napa, Inside Cylinder and lever opening 61.90 64.90 69.90

AE77012-IE Napa, Inside no lever opening with thumbturn attached 72.30 75.30 80.30E77012-IK Napa, Inside Cylinder only opening 61.90 64.90 69.90


MA-Series Screw Packs

Part Number DescriptionList Price

606 613 630S76300 1-3/8" - 1-7/8" door thickness, sectional trim with leversS76301 Over 1-7/8" - 2-1/2" door thickness, sectional trim with leversE77300 1-3/8" - 1-7/8" door thickness, escutcheon trim with leversE77301 Over 1-7/8" - 2-1/2" door thickness, escutcheon trim with leversS76302 1-3/8" - 1-7/8" door thickness, sectional trim with knobsS76303 Over 1-7/8" - 2-1/2" door thickness, sectional trim with knobs $20.30E77302 1-3/8" - 1-7/8" door thickness, escutcheon trim with knobsE77303 Over 1-7/8" - 2-1/2" door thickness, escutcheon trim with knobsS76306 Torx screw pack, sectional trim, no turnS76307 Torx screw pack, sectional trim, with turnE77306 Torx screw pack, escutcheon trim, standardE77307 Torx screw pack, escutcheon trim, over 1-7/8" – 2-1/2" door thickness

MA-Series Miscellaneous Parts

Part Number Description List Price

PE1396 Dust Box, standard with lock $4.20005099-000 Metal Dust Box 8.30

S76806 Spindles (2) for lever on standard door thickness or knob on 5.40door thickness 1-7/8" - 2-1/2"

S76816 Spindles (2) for lever on door thickness 1-7/8" - 2-1/2" 5.40S76206 Spindles (2) for knob on standard door thickness 5.40S76802 Spindles (2) for connecting door, MA161 5.40AS5813 Mounting plate for use with no outside trim 14.40


3) Non torx screw packs contains armor front screws, strike screws, trim screws, mortise screws, spindle, mounting posts

4) Torx screw packs contain armor front, strike and trim screws only


MA-Series • Options

MA-12



Less each knob or lever LLL for knob/lever designExample: MA581P LLL/DG x DG $22.60

Less each escutcheon LLL for escutcheon designExample: MA581P DN x DN/LLL 24.20

Less each rose LLL for rose designExample: MA581P DG x DG/LLL 6.20

Less standard cylinder L suffixExample: MA581L DG 55.00

Less standard hotel cylinder L suffixExample: MA451L DG 55.00

Less armor front LLL for latchExample: MA581P DG 626 LLL 21315R 20.50

Less strike LLL for strikeExample: MA581P DG 626 20099 LLL 10.60

Non-Standard Door ThicknessDescription Specify Add to Lock Price

Over 1 7/8" – 2 1/2" thick doors Door thickness and how door is extended $74.60Example: 2", EE

AbrasiveDescription Specify Add to Lock Price

6 Prefix Example: 6 DG for Dane Gala*$51.60*Not available in 613

KnurlingDescription Specify Add to Lock Price

8 Prefix Example: 8 DG for Dane Gala** $77.40**Only available in 626 finish and levers only

Lead WrapDescription Specify Add to Lock Price

9 Prefix Example: 9 DG for Dane Gala $166.00

IndicatorsDescription Specify Add to Lock Price

OCCUPIED/VACANT message indicator. Add M Suffix to trim.For Sectional and Escutcheon Trim Example: DGM for Dane Gala

$84.50

Note: 1) MA-series locks ordered less all components will be furnished as lock cases. See MA-10 for part numbers.2) Sum of applicable deducts, use DG (Dane Gala) and specified finish for base price.

Notes: 3) Must indicate how lock will be extended: Extended Inside (EI) on non-thumb turn functions onlyExtended Outside (EO) on all functionsExtended Equally (EE) on all functions

Notes: 4) Extended lead times apply.

Notes: 5) Extended lead times apply.

Notes: 6) Available on the following functions: MA301, MA311, MA321, MA371, MA431, MA451, MA541, MA571, MA641, MA921, MA931, MA941 on the outside of door.Available on the following functions: MA441 on the inside of door.


Trim Packages • MA-Series

MA-13

MA-Series Trim Packages

Cat. List Price

Number Function Specify Style605 606 613

626 625 630TP 50 S 101, 371, 381, 411, 431, 441, 521, 551, 561, 581, 851, 881 Dane, Sutro, Avalon, Quantum, Hana $276.00 $282.00 $292.00TP 60 C 301, 311, 321 Dane, Sutro, Avalon, Quantum, Hana 302.00 308.00 318.00TP 70 T 451, 531, 541, 571, 621, 641 Dane, Sutro, Avalon, Quantum, Hana 322.00 328.00 338.00TP 55 E 101 Dane, Sutro, Avalon, Quantum, Hana 333.00 339.00 349.00TP 65 E 311, 321, 301 Dane, Sutro, Avalon, Quantum, HanaTP 75 E 431, 441, 411, 371, 381 Dane, Sutro, Avalon, Quantum, Hana 348.00 354.00 364.00TP 85 E 551, 881, 851, 581, 561, 521 Dane, Sutro, Avalon, Quantum, HanaTP 95 E 641, 541, 531, 571, 621, 451 Dane, Sutro, Avalon, Quantum, Hana

Notes:S = Sectional, No Thumbturn, up to 2 cylindersC = Sectional, Thumbturn, no cylinderT = Sectional, Thumbturn & cylinderE = Escutcheon Trim

1) Specify Lever/Knob style and finish2) Contains inside and outside trim, screw pack with mounting hardware


MA-Series • Full Body Mortise Deadlocks

MA-14

ANSI-A156.13, SERIES 1000, GRADE 1

Notes: 1) If ordered with Napa Escutcheon Trim - add $105 (both sides will be included)2) Deadlock case comes with appropriate scalp (front).

MA Series Mortise Deadlocks (No Knob or Lever Trim)

Function DescriptionList Price605 606 613

626 625 630MA911P Classroom Deadlock $307.00 $313.00 $323.00MA921P Deadlock by key outside 275.00 281.00 291.00MA931P* Deadlock by key from either side, Double Cylinder lock 307.00 313.00 323.00MA941P Single Cylinder, Thumbturn inside 375.00 381.00 391.00

*CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.


Introduction RU-Series

RU-1

Table of Contents

Function Chart RU-2

Complete Lock Pricing RU-3

Order Detail RU-4

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4

Cylinder Requirements . . . . . . . . . . . . . . . .RU-5

Competitor Cylinders . . . . . . . . . . . . . . . . . .RU-6

Parts RU-7

Complete Cylinders . . . . . . . . . . . . . . . . . . .RU-7

Interchangeable Core Options . . . . . . . . . .RU-7

Conventional Cylinder Options . . . . . . . . . .RU-7

Locks Less Components . . . . . . . . . . . . . . .RU-8

Non-Standard Door Thickness . . . . . . . . . .RU-8

Tactile Warning . . . . . . . . . . . . . . . . . . . . . .RU-8

Lead Lining . . . . . . . . . . . . . . . . . . . . . . . . .RU-8

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-9

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-9

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-10

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-10

Spring Cage Conversion Kit . . . . . . . . . . .RU-10

Misc. Parts . . . . . . . . . . . . . . . . . . . . . . . . .RU-11

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11

Tailpieces . . . . . . . . . . . . . . . . . . . . . . . . . .RU-12







Strike 1-1/4" x 4-7/8", ANSI, Square corner, with dust box





RU 501 P D


Cylinder SuffixB = Less SFICBB = With SFIC Core (Best)BDC = Disp. Const. CoreG = With SFIC Core (Falcon)H = With Keyed Const.

CoreJ = Full Size IC

(Specify Manufacturer)L = Less 6-Pin CylinderP = 6-Pin Cylinder pinned


to 6 chambersP7 = 7-Pin Cylinder


Schlage C

FunctionSee RU-2

Lock Series


RU101 F36 Passage/Closet LatchsetLatch bolt by levers at all times.

RU301 F37 Privacy/Bedroom/Bath LockLatch bolt by levers. Outside lever lockedby push button in inside lever. Rotatinginside lever or closing door releases pushbutton. Emergency release in outsidelever unlocks door.

RU381 F45 Classroom Security LockLatchbolt operated by lever from eitherside except when key from inside leverlocks outside lever. When outside lever islocked, latchbolt retracted by key inoutside lever or by turning inside lever.

RU411 Asylum Lock*Deadlocking latch bolt by key fromeither side at all times. Both leversinoperable.

RU501 F41 Entry LockPush button locking. Button on insidelocks outside lever until unlocked by keyor by rotating inside lever. Inside lever always free. Deadlocking latch bolt.

RU511 F40/F41 Entry/Office LockTurn/push button locking. Pushing andturning button locks outside leverrequiring use of key until button ismanually unlocked. Push button locking.Pushing button locks outside lever untilunlocked by key or by rotating insidelever. Inside lever always free.Deadlocking latch bolt.

RU521 F40 Office LockTurn button locking. Turning buttonlocks outside lever requiring use of keyuntil button is manually unlocked. Insidelever always free. Deadlocking latch bolt.

RU561 F42 Classroom LockDeadlocking latch bolt by levers. Outsidelever is locked by key in outside lever.Inside lever is always free.

RU571 F48 Dormitory LockDeadlocking latch bolt by levers exceptwhen locked by push button in insidelever. Key in outside lever locks orunlocks lever and releases button.Closing door releases push button. Insidelever always free.

RU581 F44 Storeroom LockDeadlocking latch bolt by lever inside orkey outside. Outside lever is inoperable.Inside lever always free.

RU851 Storeroom (Electrified-Fail Safe)Latch bolt operated by lever from eitherside except when outer lever iselectrically locked. When outer lever islocked (inoperable), latch bolt retractedby key in cylinder outside. 24 volt DC.185 Amps, continuous duty.

RU881 Storeroom (Electrified-Fail Secure)Deadlocking latch bolt operated by leverinside at all times. Outside leverinoperable until electrically unlocked,then latch bolt from either side. Whenoutside lever is inoperable, latch boltretracted by key in cylinder outside. 24 volt DC .185 Amps, continuous duty.

ANSI A156.2, Series 2000 Grade 1

Retrofit Locks

FALCON ANSI

Retrofit Locks

FALCON ANSI


RU-Series • Functions

RU-2



Complete Locks • RU-Series

RU-3

Grade 1 Heavy Duty Unit Lock Retrofit Key-In-Lever Lockset ANSI- A156.2, GRADE 1



D Q D

Function Description 626 613

Single Cylinder FunctionsRU501PD EntryRU511PD Entry/OfficeRU521PD Entry/OfficeRU561PD Classroom $624.00 $654.00RU571PD DormitoryRU581PD StoreroomSingle Cylinder Functions - ElectrifiedRU8511PD Elec. Storeroom – Fail Safe $944.00 $974.00RU8811PD Elec. Storeroom – Fail SecureDouble Cylinder FunctionsRU381PD Classroom Security

$688.00 $718.00RU411PD AsylumDouble cylinder locks on residences and any door in any structure which is

*CAUTION: used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

Non-Keyed FunctionsRU101S Passage $518.00 $548.00RU301S Privacy 586.00 616.00


RU-Series • Latches, Strikes

RU-4

Latches with LocksBackset Description Specify Add to Lock Price

Latch height 1-3/4" 314691Latch height 2-1/16" 314692Latch height 2-5/8" 314693 N/C

2-3/4" Latch height 2-11/16" 314694Latch height 1-3/4" x 3/4 Proj. 315491Latch height 2-1/16" x 3/4 Proj. 315492 $122.00Latch height 2-5/8" x 3/4 Proj. 315493Latch height 2-11/16" x 3/4 Proj. 315494

Latches sold separateFinishes: 613, 626

Backset Description Spring Latch Dead Latch List PriceLatch height 1-3/4" x 1/2 Proj. A31469-001 A31469-01D $83.10Latch height 2-1/16" x 1/2 Proj. A31469-002 A31469-02D 109.00Latch height 2-5/8" x 1/2 Proj. A31469-003 A31469-03D

2-3/4" Latch height 2-11/16" x 1/2 Proj. A31469-004 A31469-04D 115.00

Latch height 1-3/4" x 3/4 Proj. - A31549-01DLatch height 2-1/16" x 3/4 Proj. - A31549-02D 164.00Latch height 2-5/8" x 3/4 Proj. - A31549-03DLatch height 2-11/16" x 3/4 Proj. - A31549-04D

Strikes with LocksDescription Specify Add to Lock Price

ANSI, 1-1/4" x 4-7/8" standard 5164Early Corbin Russwin single door 031471 N/CEarly Corbin Russwin single door 31471SEarly Corbin Russwin pair doors 031472Yale Mono Pair of Doors 031473 $73.30Early Corbin 031474Early Russwin Unit Lock 0314771" deep for 4-7/8" high ANSI strike, dust box 005099-000 30 N/C3/4 deep for 3-1/4" high strike, dust box 031453-000 30 1.70

Strikes sold separateFinishes: 613, 626, 630


ANSI, 1-1/4" x 4-7/8" standard 005164-000 $11.40Early Corbin Russwin single door 031471-000Early Corbin Russwin single door 031471-001 13.60

Early Corbin Russwin pair doors 031472-000Yale Mono Pair of Doors 1-3/16" 031473-000 73.30Early Corbin 031474-000Early Russwin Unit Lock 031477-0001" deep for 4-7/8" high ANSI strike, dust box - 005099-000 30 2.603/4 deep for 3-1/4" high strike, dust box - 031453-000 30 1.70


Order Detail • RU-Series

RU-5

Ordering Format Catalog Trim Latch Strike

Qty. Number Design Finish Height Part No. Hand Cylinder Other Requirements

8 RU521 D 626 1 3/4" 031471-000 RH Less IC-CR Cylinder

When evaluating the retrofit requirements for an RU Series lockset, the following ques tions need to be answered.

① Which manufacturer’s unit lock is currently installed?

❏ Russwin ❏ Corbin ❏ Corbin Russwin ❏ Yale ❏ Falcon

➁ What is the existing latch height? To determine latch height measure existing latch height as shown here:

Latch heights currently identified and the manufacturer:

1. 1 3/4" Most Corbin & Russwin sold 1949 thru current; Yale 62002. 2 1/16" Corbin, Falcon3. 2 5/8" Certain Corbin (0)2400 Series sold 1913-19534. 2 11/16" Russwin 2100 & 2800 Series sold 1904-1968

③ What is the existing strike condition?

④ What is the existing door thickness?

Locks are for 1-3/4" thick doors only.

0005164-000 031477-000Early Russwin

Unit Lock

031474-000Early Corbin

031471-000Note: Strike, Door and Lock

Same Center LineEarly Corbin Russwin

Single Door

031471-001Note: Strike Center Line is not

the Same as Door and LockEarly Corbin Russwin

Single Door

031472-000Early Corbin Russwin

Pair of Doors

031473-000Yale Mono

Pair of Doors

DOOR LA T

CH

CUT O

UT HEIGH

1 - 1/4"

3 - 3/8 "

4- 1/8 "

4- 7/8 "

1 -5/6"

1 - 15/6"

2 -5/8"

1 - 3/8"

1 - 15/16"

4- 13/16 "

4 "

1 - 1/8" 9/16"

3 - 11/32"

1 - 1/2" 2 - 1/8"

5/8"

4-5/32 "

1 - 1/4"

1 - 3/4"

1 - 1/8" 9/16"

1 -9/16"

2 - 1/4"

2 - 1/8"

2 -5/8" 3 - 1/4"

2 - 1/4"

1 - 1/8" 9/16"

1 -9/16"

2 - 1/8"

2 -5/8" 3 - 1

1 - 7/8"

1 - 1/8"

2 - 1/4"

2 -5/8" 3 - 1/4 "

1 - 3/8" 11/16"

1 - 7/8"

1 - 1/8"

2 - 1/4"

2 -5/8" 3 - 1/4 "

1 - 3/8" 11/16"


RU-Series • Order Detail Cont.

RU-6

Specify cylinder requirements. (Note: Locks furnished with Falcon’s standard “G” keyway cylinder or prepared for Falcon interchangeable core unless otherwise specified.)

With Cylinder

Falcon IC

❏ 6-pin❏ 7-pin

Falcon Standard

❏ 6-pinspecify keyway


Competitors’ Keyways - 6-pin Standard Cylinder*

❏ Corbin - 60, 0 Bitted, KD❏ Russwin - D1, 0 Bitted, KD❏ Sargent - LA, 0 Bitted, KD (Also accepts LB, LC keys)❏ Schlage - C, 0 Bitted, KD, KA4❏ Schlage - E, 0 Bitted❏Yale - 8 (Para), 0 Bitted, KD

Less Cylinder - Prepared to Accept**

❏ Falcon IC

Falcon Standard

❏ 6-pin❏ 7-pin

Unit / Mono Lock Cylinders

❏ Falcon Standard (R Series old small plug) 6-pin❏ Corbin Russwin Unit Lock (2000-052) - Master Ring not available

❏ Medeco Unit Lock Retrofit Cylinder(20W5005) - Corbin Russwin Unit Lock

❏ Medeco Unit Lock Retrofit Cylinder(20W0500) - Yale 6200 Mono Lock

❏Yale Mono Lock (1801) and later models

Competitors’ Standard Cylinders

❏ Assa (65611 or 65661) 6-pin❏ Corbin Russwin (2000-034 / CL3400) 6-pin-Master Ring not available

❏ Medeco (20W200V3) 6-pin- tailpiece supplied by Medeco - Falcon / Schlage style

❏ Peaks (Kaba) 6-pin❏ Primus (Schlage) 6-pin❏ Sargent (6, 7 & 10 Line) 6-pin - Keso not available❏ Schlage 6-pin❏Yale (1801) 6-pin - Bicentric not available

Competitors’ IC❏ Arrow 6, 7-pin❏ Assa (70600IC & V70600IC) 6-pin❏ Best 6, 7-pin❏ Corbin Russwin (8000) 6-pin❏ Corbin Russwin (8000-7) 7-pin❏ InstaKey❏ Medeco 31 Series 6-pin❏ Medeco 32 Series 6-pin❏ Medeco Keymark 6, 7-pin❏ Peaks (Kaba) 6, 7-pin❏ Primus (Schlage) 6-pin❏ Sargent (6300) 6-pin❏ Schlage 6-pin❏Yale (1210) 6-pin

* Generic replacement cylinders with competitors’ keyways. ** Proper tailpiece supplied unless otherwise noted.


RU-7

Competitors’ I-Cores & Competitors’ Standard Cylinder • RU-Series

Compatibility with Competitors’ I-Cores

Compatibility with Competitors’ Standard Cylinders

The RU Series is furnished with Falcon’s standard “G” keyway cylinder unless otherwise specified. The RU Series accepts the following competitors’ standard 6-pin cylinders.

❏ Assa (65611 or 65661) 6-pin

❏ Corbin Russwin (2000-034 / CL3400) 6-pin - Master Ring not available

❏ Medeco (20W200V3) 6-pin - tailpiece supplied by Medeco- Falcon / Schlage style

❏ Peaks (Kaba) 6-pin

❏ Primus (Schlage) 6-pin

❏ Sargent (6, 7 & 10 Line) 6-pin - Keso not available

❏ Schlage 6-pin

❏ Yale (1801) 6-pin - Bicentric not available

Falcon’s standard interchangeable core option. Specify 6 or 7-pin.Locksets with this option also accept Schlage SFIC, Arrow (in clud ing FlexCore), Best (including PKS & Peaks), InstaKey, Kaba Peaks, Keymark andKSP cores.

The following larger format interchangeable cores will work with the T Series locksets when lockset is so specified:

Assaold and new styleSpecify IC-AS

Corbin Russwin8000 or 8000-7Specify IC-CR6or IC-CR7

Medeco32 Series 6-pinSpecify IC-ME

Medeco31 Series 6-pinSpecify IC-YA6

Sargent6300

Specify IC-SA

Schlage 6-pinincluding PrimusSpecify IC-SC

Yale 6-pinSpecify IC-YA6

Falcon

Assa CorbinRusswin

Medeco32

Medeco31

Sargent6300

Schlage Yale

Price Book 108Effective January 31, 2011 • Rev. 1/11RU-8

RU-Series • Cylinder Options

RU Series • Complete Cylinders Cylinder Mechanism Part Number Price Each

5 pin cylinder RU series (except 381 IS, 571) A23151-055 pin cylinder RU series 381 IS A23151-065 pin cylinder RU series 571 A23151-07 $38.006 pin cylinder RU series (except 381 IS, 571) A23161-056 pin cylinder RU series 381 IS A23161-066 pin cylinder RU series 571 A23161-077 pin cylinder RU series (except 381 IS, 571) A23171-057 pin cylinder RU series 381 IS A23171-06 51.007 pin cylinder RU series 571 A23171-07

Conventional Cylinder Options Description Specify Add to Lock

Price (per core)

5 pinned cylinder P Suffix STDExample: RU581P

6 pinned cylinder P6 Suffix N/CExample: RU581P6

7 pinned cylinder P7 Suffix $13.70Example: RU581P7

6 pinned Competitor keyway cylinders* P6 Suffix Example: RU581P6 (0 Bitted, KD, KA4 only)

Schlage C (6 pin only) CP6 Suffix N/C

Example: RU581CP6 (All other keying, not listed above)

Note: 1) Finishes: 606 and 626 only2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections see Cyl-3 for charge. See Restricted Keyway Policy (p.8) for standard keyways andpolicy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.

Interchangeable Core and Small Format Construction Core Description Specify Add to Lock

Price (per core)

Small format core * G SuffixExample: RU581GD6 $39.00

Small format core (Best Style) * BB SuffixExample: RU581BB6

Small format construction core ** H Suffix 28.40Example: RU581HD6

Less Small format core B SuffixExample: RU581BD N/C

Less Full Size core J SuffixExample: RU581JD SCH x DAN

Small format disposable core BDC Suffix 3.50Example: RU581BDC


Note: 5) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for detailspolicy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.

* Keying must be specified

** Locks are assessed one non-refundable handling charge (50-231F) per core.


Less Components, Thick Door, Tactile Warning, Lead Lining • RU-Series

RU-9

Locks Less Components Description Specify Deduct from

Lock Price

Less standard cylinder L suffixExample: RU581LD DAN $38.00

Less latch LLL suffixExample: RU581PD DAN 626 LLL/5164 51.20

Less strike LLL suffixExample: RU581PD DAN 626 314691 LLL 7.50

Tactile Warning (Abrasive coat)Description Specify Add to

Lock Price

Abrasive Preface the design code with 6Example: 6DA for DAN $51.20

Lead LiningDescription Specify Add to

Lock Price

Lead lining Preface the design code with 9Example: 9DA for DAN $226.00

Note: 1) Not available on 613.

Levers, Conventional CylinderPart Number Description List Price030742-000 Dane lever, closed030742-001 Dane lever, open $40.50

030744-000 Quantum lever, closed030744-001 Quantum lever, open030929-002 Lever, Dane open (Corbin Russwin, Medeco, Yale unit) 48.10030929-003 Lever, Quantum open (Corbin Russwin, Medeco, Yale unit)030996-002 Lever, Dane open (Sargent 6, 7 & 10 line, Yale) 54.10030996-003 Lever, Quantum open (Sargent 6, 7 & 10 line, Yale)A30753-00* Inside lever w/set screw, closedA30753-01* Inside lever w/set screw, open 33.10

A31544-00* Inside lever w/set screw, closed 851/881 82.70

Levers and related parts, Small Format and Large Format Interchangeable CorePart Number Description List Price030742-002 Lever, Dane SFIC $40.50030744-002 Lever, Quantum SFIC030926-002 Lever, Dane IC, ASSA, Medeco, Yale 86.60030926-003 Lever, Quantum IC, ASSA, Medeco, Yale030927-002 Lever, Dane IC, Schlage 86.90030927-003 Lever, Quantum IC, Schlage030928-002 Lever, Dane IC, Corbin Russwin 84.00030928-003 Lever, Quantum IC, Corbin Russwin030930-002 Lever, Dane IC, Sargent 79.00030930-003 Lever, Quantum IC, Sargent

RosesPart Number Description List Price031452-000 Rose, square $27.60

* Specify design prefix D (Dane), Q (Quantum)


RU-Series • Trim

RU-10

Note: 1) Dane available in 626 and 613 Quantum available in 626.


Miscellaneous Parts • RU-Series

RU-11

Miscellaneous PartsPart Number Description List Price

022104-000-30 Short Slide Catch $ 0.68022105-000-30 Slide Catch 2.00022106-002-55 Retractor 2.50022108-000-60 Retractor Spring 4.90022112-000-30 Retainer, Retractor Spring 1.40022986-001-50 Retractor Insert 0.52030703-000-30 Inner Spindle, Passage and Button Functions 21.40030704-002-30 Lever Stop Plate 3.10030709-000-60 Clutch Spring 0.32030712-000-30 Mounting Plate, Inner 3.00030712-001-30 Mounting Plate, Outer 2.60030718-000-30 Key Spindle, std 3.90030718-001-30 Key Spindle, IC 030722-000-30 Dogging Bar 2.50030724-000-30 Lever Retaining Ring 0.52030726-000-30 Flanged Nut 6.00030726-007-30 Flanged Nut, Inner Electrified 8.40

030728-000 Push Button Cap 7.80030733-000-55 Spindle Inner 2.80031416-000-70 Solenoid, Fail Safe RU851 312.00031511-000-30 Hex Nut, 1/-28 Special 6.60031514-000-30 Solenoid Mount 8.50031519-000-30 Inner Spindle, RU851/881 33.80

1387 Hex Key – 1/8" with Looped Handle 12.701388 Hex (castle) Not installation tool 29.30

A30746-000-00 Hub & Housing Assembly 12.50A30747-000-00 Hub & Plate Assembly 11.50A30749-060-00 Insert & Spindle Assembly, Outer, 6 Pin 82.00A30749-070-00 Insert & Spindle Assembly, Outer, 7 Pin 49.00A30905-001-00 Spindle & Driver Assembly, ICA30905-060-00 Spindle & Driver Assembly, 6 Pin 46.00A30906-070-00 Spindle & Driver Assembly, 7 PinA30913-000-00 Key Spindle Assembly, Inner Std.A30913-001-00 Key Spindle Assembly, Inner IC 139.00

Q330-272 RU Lock Spring Cage Kit (for all functions except RU101 and RU301)Q330-273 RU Lock Spring Cage Kit (RU101 and RU301) 33.00

ScrewsPart Number Description Finishes Size List Price002762-000 RU latch screw 606, 613, 626 8-32 x3/8 $ 0.24

002770-016-30 Insert screws – 10-32 x 1 0.38021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo 0.40024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4"combo 0.22

030755-005-30 Type D screw – 8-32 x 5/16" 0.28030831-004-30 Set screw – 1/4-20 x 1/4" 0.46031533-006-30 Self tap screw – 8-32 x3/8" 0.34031541-006-30 Mounting plate screws – 8-32 x 1/2" 0.36

Tailpieces for Conventional CylindersCylinder Std. Functions RU381 Inside RU571 Price

Falcon 6-pin* (10/pack) A30730-001-00 A30730-003-00 A30730-002-00 $16.50 pkg. of 10Falcon 7-pin (10/pack) A30730-002-00 A30730-004-00 A30730-006-00 16.50 pkg. of 10Sargent 6 & 10 Line 030997-001-30 030997-003-30 030997-005-30 8.60 eachYale1801, 5801 030917-001-30 030917-003-30 030917-005-30 24.50 eachCorbin Russwin 030994-001-30 030994-003-30 030994-005-30 46.10

*Assa 65611 and 65661; Corbin Russwin 2000-034 and Schlage, including Primus, all use the Falcon 6-pin tailpiece;

IC Throw Members (Tailpieces)Core Type Std. Functions RU381 Inside RU571 Price

Falcon 6-pin* 030739-000-30 030739-002-30 030739-000-30 $1.70Falcon 7-pin* 030739-001-30 030739-003-30 030739-001-30 1.70Corbin Russwin 8000 and Sargent 6300 031468-000-30 031468-002-30 031468-004-30 5.30Corbin Russwin 8000-7 (7-pin) 031468-001-30 031468-003-30 031468-005-30 5.30Medeco 32 Series & ASSA A30988-000-00 A30988-002-00 A30988-004-00 4.40Schlage full size, including Primus 031467-000-30 031467-002-30 031467-004-30 10.70Yale and Medeco 31 Series 6-pin 030917-001-30 030917-003-30 030917-005-30 25.10

*Arrow, Best, InstaKey. Kaba Peaks, Keymark, KSP and Schlage small format cores all use the Falcon configuration.


RU-Series • Cylinder & IC Parts

RU-12

Table of Contents

Function Chart T-2

Complete Lock Pricing T-3

Options & Parts T-4

Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-4

Tailpieces . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-5

Order Detail . . . . . . . . . . . . . . . . . . . . . . . . . .T-6

Competitor Cylinders . . . . . . . . . . . . . . . . . . .T-7

Locks Less Components . . . . . . . . . . . . . . . .T-8

Non-Standard Door Thickness . . . . . . . . . . . .T-8

Tactile Warning . . . . . . . . . . . . . . . . . . . . . . . .T-8

Lead Lining . . . . . . . . . . . . . . . . . . . . . . . . . . .T-8

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10

Spring Cage Conversion Kit . . . . . . . . . . . . .T-10

Misc. Parts . . . . . . . . . . . . . . . . . . . . . . . . . .T-11

Chassis Assemblies . . . . . . . . . . . . . . . . . . .T-12

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-12















T 501 P D



CoreJ = Less FSIC (designate

cylinder manufacturer)L = Less 6-Pin CylinderP = 6-Pin Cylinder pinned




Schlage C

FunctionSee T-2

Lock Series



T-1

Introduction T-Series

T101 F75 Passage/Closet LatchsetLatch bolt by levers at all times.

T291 Privacy Hospital LockLatch bolt by levers. Outside lever locked by push button in inside lever. Rotating inside lever, closing door, or turning emergency release turn button on outside, release push button. Inside is always free for egress.

T301 F76 Privacy LockLatch bolt by levers. Outside lever lockedby push button in inside lever. Rotatinginside lever or closing door releases pushbutton. Emergency release in outsidelever unlocks door.

T351 Closet LockDeadlocking latch bolt by turn knobinside or lever outside except whenoutside lever is locked by key.

T381 F88 Classroom Security LockLatchbolt operated by lever from eitherside except when key from inside leverlocks outside lever. When outside lever islocked, latchbolt retracted by key inoutside lever or by turning inside lever.

T411 F87 Asylum Lock*Deadlocking latch bolt operated by keyin lever from either side. Both leversalways inoperable.

T501 F82 Entry LockPush button locking. Button on insidelocks outside lever until unlocked by keyor by rotating inside lever. Inside leveralways free. Deadlocking latch bolt.

T511 F109 Entry/Office LockTurn/push button locking. Pushing andturning button locks outside leverrequiring use of key until button ismanually unlocked. Push button locking.Pushing button locks outside lever untilunlocked by key or by rotating insidelever. Inside lever always free.Deadlocking latch bolt.

T521 F81 Office LockTurn button locking. Turning buttonlocks outside lever requiring use of keyuntil button is manually unlocked. Insidelever always free. Deadlocking latch bolt.

T561 F84 Classroom LockDeadlocking latch bolt by levers. Outsidelever is locked by key in outside lever.Inside lever is always free.

T571 F90 Dormitory LockDeadlocking latch bolt by levers exceptwhen locked by push button in insidelever. Key in outside lever locks orunlocks outside lever and releases button.Closing door releases push button. Insidelever always free.

T581 F86 Storeroom LockDeadlocking latch bolt by lever inside orkey outside. Outside lever is inoperable.Inside lever always free.

T851 Storeroom (Electrified – Fail Safe)Latch bolt operated by lever from eitherside except when outer lever iselectrically locked. When outer lever islocked (inoperable), latch bolt retractedby key in cylinder outside. 24 volt DC.185 Amps, continuous duty.

T881 Storeroom (Electrified – FailSecure)Deadlocking latch bolt operated by leverinside at all times. Outside leverinoperable until electrically unlocked,then latch bolt from either side. Whenoutside lever is inoperable latch boltretracted by key in cylinder outside. 24volt DC .185 Amps, continuous duty.

T12 Dummy TrimSingle Trim-surface mounted rigid lever.


Key-In-Lever Locks

FALCON ANSI

Key-In-Lever Locks

FALCON ANSI


T-Series • Functions

T-2

* Caution: Double cylinder locks on residences and any door, in any structure, which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.


Grade 1 Extra Heavy Duty Cylindrical LocksetsANSI-A156.2, SERIES 4000, GRADE 1 Complete Locks • T-Series

T-3

A (Avalon) D (Dane) Q (Quantum)


A D Q605


Single Cylinder FunctionsT351PD Closet T501PD EntryT511PD Entry/OfficeT521PD OfficeT561PD Classroom $349.00 $361.00 $379.00T571PD DormitoryT581PD StoreroomT851PD Elec. Storeroom – Fail Safe $638.00 $650.00 $668.00T881PD Elec. Storeroom – Fail SecureDouble Cylinder FunctionsT381PD Exit Security $410.00 $422.00 $440.00T411PD* Asylum


Non-Keyed FunctionsT101S Passage $251.00 $263.00 $281.00T291S Hospital/Grade School Privacy 314.00 326.00 344.00T301S PrivacyDummy TrimT12 Half Dummy $120.00 126.00 136.00

T Series • Complete Cylinders Cylinder Mechanism Part Number Price Each

5 pin cylinder T series (except 381 IS, 571) A23151-055 pin cylinder T series 381 IS A23151-065 pin cylinder T series 571 A23151-07

$38.006 pin cylinder T series (except 381 IS, 571) A23161-056 pin cylinder T series 381 IS A23161-066 pin cylinder T series 571 A23161-077 pin cylinder T series (except 381 IS, 571) A23171-057 pin cylinder T series 381 IS A23171-06 51.007 pin cylinder T series 571 A23171-07


Price (per core)

5 pinned cylinder P Suffix STDExample: T581P

6 pinned cylinder P6 Suffix N/CExample: T581P6

7 pinned cylinder P7 Suffix $11.00Example: T581P7

6 pinned Competitor keyway cylinders* P6 Suffix Example: T581P6 (0 Bitted, KD, KA4 only) N/C

Schlage C (6 pin only) CP6 Suffix Example: T581CP6 (All other keying, not listed above)

Note: 1) Finishes: 606 and 626 only2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections see Cyl-3 for charge. See Restricted Keyway Policy (p.8) for standard keyways andpolicy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.

Small Format Interchangeable Core and Small Format Construction Core Description Specify Add to Lock

Price (per core)

Small format core * G SuffixExample: T581GD6 $39.00

Small format core (Best Style) * BB SuffixExample: T581BB6

Small format construction core ** H Suffix 28.40Example: T581HD6

Less Small format core B SuffixExample: T581BD

Less Full Size core J Suffix N/C

Example: T581JD SCH x DANSmall format disposable core BDC Suffix

3.50Example: T581BDC


T-Series • Cylinder Options

T-4






Cylinder Parts • T Series

T-5

Tailpieces for Conventional CylindersCylinder Std. Functions T381 Inside T571 Price

Falcon 6-pin* (10/pack) A30730-001-00 A30730-003-00 A30730-002-00 $16.50 pkg of 10Falcon 7-pin (10/pack) A30730-002-00 A30730-004-00 A30730-006-00 $16.50 pkg of 10Sargent 6 & 10 Line 030997-001-30 030997-003-30 030997-005-30 $8.60 eachYale 1801, 5801 030917-001-30 030917-003-30 030917-005-30 $24.50 eachCorbin Russwin 030994-001-30 030994-003-30 030994-005-30 46.10

IC Throw Members (Tailpieces)Cylinders Std. Functions T381 Inside T571 Price

Falcon 6-pin* 030739-000-30 030739-002-30 030739-000-30 $1.70Falcon 7-pin* 030739-001-30 030739-003-30 030739-001-30 1.70Corbin Russwin 8000 and Sargent 6300 031468-000-30 031468-002-30 031468-004-30 5.30Corbin Russwin 8000-7 (7-pin) 031468-001-00 031468-003-30 031468-005-30 5.30Medeco 32 Series & ASSA A30988-000-00 A30988-002-00 A30988-004-00 4.40Schlage Full Size, Including Primus 031467-000-30 031467-002-30 031467-004-30 10.70Yale and Medeco 31 Series, 6-pin 030917-001-30 030917-003-30 030917-005-30 25.10

* Assa 65611 and 65661, Corbin Russwin 2000-034 and Schlage, including Primus, all use the Falcon 6-pin tailpiece.

* Arrow, Best, InstaKey, Kaba Peaks, Keymark, KSP and Schlage small format cores all use the Falcon configuration.


T-Series • Order Detail

T-6

Specify cylinder requirements. (Note: Locks furnished with Falcon’s standard “G” keyway cylinder or prepared for Falcon interchangeable core unless otherwise specified.)

With Cylinder

Falcon IC

❏ 6-pin❏ 7-pin

Falcon Standard



Competitors’ Keyways - 6-pin Standard Cylinder*

❏ Corbin - 60, 0 Bitted, KD❏ Russwin - D1, 0 Bitted, KD❏ Sargent - LA, 0 Bitted, KD (Also accepts LB, LC keys)❏ Schlage - C, 0 Bitted, KD, KA4❏ Schlage - E, 0 Bitted❏Yale - 8 (Para), 0 Bitted, KD

Less Cylinder - Prepared to Accept**

❏ Falcon IC

Falcon Standard

❏ 6-pin❏ 7-pin

Unit / Mono Lock Cylinders

❏ Falcon Standard (R Series old small plug) 6-pin❏ Corbin Russwin Unit Lock (2000-052) - Master Ring not available

❏ Medeco Unit Lock Retrofit Cylinder(20W5005) - Corbin Russwin Unit Lock

❏ Medeco Unit Lock Retrofit Cylinder(20W0500) - Yale 6200 Mono Lock

❏Yale Mono Lock (1801) and later models

Competitors’ Standard Cylinders

❏ Assa (65611 or 65661) 6-pin❏ Corbin Russwin (2000-034 / CL3400) 6-pin-Master Ring not available

❏ Medeco (20W200V3) 6-pin- tailpiece supplied by Medeco - Falcon / Schlage style

❏ Peaks (Kaba) 6-pin❏ Primus (Schlage) 6-pin❏ Sargent (6, 7 & 10 Line) 6-pin - Keso not available❏ Schlage 6-pin❏Yale (1801) 6-pin - Bicentric not available

Competitors’ IC❏ Arrow 6, 7-pin❏ Assa (70600IC & V70600IC) 6-pin❏ Best 6, 7-pin❏ Corbin Russwin (8000) 6-pin❏ Corbin Russwin (8000-7) 7-pin❏ InstaKey❏ Medeco 31 Series 6-pin❏ Medeco 32 Series 6-pin❏ Medeco Keymark 6, 7-pin❏ Peaks (Kaba) 6, 7-pin❏ Primus (Schlage) 6-pin❏ Sargent (6300) 6-pin❏ Schlage 6-pin❏Yale (1210) 6-pin

* Generic replacement cylinders with competitors’ keyways. ** Proper tailpiece supplied unless otherwise noted.


Competitors’ I-Cores & Competitors’ Standard Cylinder • T Series

T-7

Compatibility with Competitors’ I-Cores

Falcon’s standard interchangeable core option. Specify 6 or 7-pin.Locksets with this option also accept Schlage SFIC, Arrow (in clud ing FlexCore), Best (including PKS & Peaks), InstaKey, Kaba Peaks, Keymark andKSP cores.

The following larger format interchangeable cores will work with the T Series locksets when lockset is so specified:

Assaold and new styleSpecify IC-AS

Corbin Russwin8000 or 8000-7Specify IC-CR6or IC-CR7

Medeco32 Series 6-pinSpecify IC-ME

Medeco 3131 Series 6-pinSpecify IC-YA6

Sargent6300

Specify IC-SA

Schlage 6-pinincluding PrimusSpecify IC-SC

Yale 6-pinMedeco 31 SeriesSpecify IC-YA6

Falcon

Assa CorbinRusswin

Medeco32

Medeco31

Sargent6300

Schlage Yale

Compatibility with Competitors’ Standard CylindersThe T Series is furnished with Falcon’s standard “G” keyway cylinder unless otherwise specified, and accepts the followingcompetitors’ standard 6-pin cylinders.

❏ Assa (65611 or 65661) 6-pin

❏ Corbin Russwin (2000-034 / CL3400) 6-pin - Master Ring not available

❏ Medeco (20W200V3) 6-pin - tailpiece supplied by Medeco- Falcon / Schlage style

❏ Peaks (Kaba) 6-pin

❏ Primus (Schlage) 6-pin

❏ Sargent (6, 7 & 10 Line) 6-pin - Keso not available

❏ Schlage 6-pin

❏ Yale (1801) 6-pin - Bicentric not available


T-Series • Special Options

T-8


Lock Price

Less each lever LLL Example: T581PD LLL/DAN $20.30

Less standard cylinder L suffixExample: T581LD DAN 38.00

Less latch LLL Example: T581PD DAN 626 LLL/5164 31.60

Less strike LLL Example: T581PD DAN 626 98535 LLL 7.50

Non-Standard Door ThicknessDescription Specify Add to

Lock Price

Door thickness 1-3/8" to 1-3/4" A30775-000-00 for thin door shims $10.60

Note: 1) T Series lockset will accommodate up to a 2-1/8" thick door prep standard.

Tactile Warning (Abrasive coat)Description Specify Add to

Lock Price

Abrasive Strip* Preface the design code with 6Example: 6DA for DAN $49.50

Note: 2) Outside lever only is coated unless otherwise specified.

* Not available in 613.

Lead LiningDescription Specify Add to

Lock Price

Lead lining Preface the design code with 9Example: 9DA for DAN $226.00


Latches and Strikes • T Series

T-9

Latches with LocksFinishes: 606, 613, 630

Backset Description Specify List PriceSquare corner, 1-1/8" x 2-1/4", std. 98535

2-3/4" 9/16" radius corner, 1-1/8" x 2-1/4" 98538 N/CSquare corner, 1" x 2-1/4" 923301/4" Radius round corner, 1" x 2-1/4" 92331

2-3/8"* Square corner, 1" x 2-1/4" 92320 10.90

1/4" Radius round corner, 1" x 2-1/4" 923215" Backset Link for 2-3/4" Backset Latch A22161-005-00 34.60


BacksetLatch Face 2-3/8" 2-3/4" List Price1" Deadlatch A92320-00D A92330-00D1" Spring Latch A92320-000 A92330-0001" Spring Latch – 1/4" Radius A92321-000 A92331-000 $48.801" Deadlatch – 1/4" Radius A92321-00D A92331-00D1-1/8" Spring Latch A98535-0001-1/8" Deadlatch A98535-00D1-1/8" Spring Latch – 9/16" Radius - A98538-0001-1/8" Deadlatch – 9/16" Radius A98538-00D5" Backset Link for 2-3/4" Backset Latch A22161-005-00 32.90

Strikes sold separateDescription Lip Length Specify List Price

Square Corner, T-strike, 1-1/8" x 2-3/4" 1-1/8" A05185-000 $3.20 1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1” Q001-048 3.50Square corner, full lip 1-5/8" x 2-1/4" Q001-049ANSI, 1-1/4" x 4-7/8" standard 1-5/16" 005164-000 11.40 ANSI dust box 1" deep, steel - 005099-000-30 2.60 ANSI 1-1/4” x 4-7/8” 7/8” 005161-000 17.00Radius T Strike, 1-1/8” x 2-3/4” 9/16” A05185-004 3.50



ANSI, 1-1/4" x 4-7/8" standard 1-5/16” 5164 N/CSquare corner, full lip 1-5/8" x 2-1/4" 1” 01-049 N/C1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1” 01-048 N/CSquare Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16” 5185 N/CANSI dust box 1" deep, steel - 005099-000-30 N/CANSI 1-1/4” x 4-7/8” 7/8” 5161 N/C

Radius T Strike, 1-1/8” x 2-3/4” 9/16” 5185-4 N/C



T-Series • Levers and Parts

T-10

Levers, Conventional CylinderPart Number Description List Price030740-000 Avalon lever, closed030740-001 Avalon lever, open030742-000 Dane lever, closed030742-001 Dane lever, open $40.50

030744-000 Quantum lever, closed030744-001 Quantum lever, open030929-001 Lever, Avalon open (Corbin Russwin, Medeco, Yale unit)030929-002 Lever, Dane open (Corbin Russwin, Medeco, Yale unit) 48.10030929-003 Lever, Quantum open (Corbin Russwin, Medeco, Yale unit)030996-001 Lever, Avalon open (Sargent 6, 7 & 10 line, Yale)030996-002 Lever, Dane open (Sargent 6, 7 & 10 line, Yale) 54.10030996-003 Lever, Quantum open (Sargent 6, 7 & 10 line, Yale)A30753-00* Inside lever w/set screw, closedA30753-01* Inside lever w/set screw, open 33.10

A31544-00* Inside lever w/set screw, closed 851/881 82.70* Lever design must be specified. D (Dane) Q (Quantum) A (Avalon)

Levers, Small and Large Format Interchangeable CorePart Number Description List Price030740-002 Lever, Avalon SFIC030742-002 Lever, Dane SFIC $40.50030744-002 Lever, Quantum SFIC030926-001 Lever, Avalon IC, ASSA, Medeco, Yale030926-002 Lever, Dane IC, ASSA, Medeco, Yale 86.60030926-003 Lever, Quantum IC, ASSA, Medeco, Yale030927-001 Lever, Avalon IC, Schlage030927-002 Lever, Dane IC, Schlage 87.10030927-003 Lever, Quantum IC, Schlage030928-001 Lever, Avalon IC, Corbin Russwin030928-002 Lever, Dane IC, Corbin Russwin 84.00030928-003 Lever, Quantum IC, Corbin Russwin030930-001 Lever, Avalon IC, Sargent030930-002 Lever, Dane IC, Sargent 90.00030930-003 Lever, Quantum IC, Sargent

RosesPart Number Description List price

626 605 606 613

030706-002 Rose cover $19.50 $22.50 $27.50

Note: 1) When ordering levers or roses, specify finish.


Levers and Parts • T-Series

T-11

Miscellaneous PartsPart Number Description List Price022104-000-30 Short Slide Catch $ 0.74022105-000-30 Slide Catch 2.00022106-002-55 Retractor 2.60022108-000-60 Retractor Spring 4.90022112-000-30 Retainer, Retractor Spring 1.40022986-001-50 Retractor Insert 0.52030703-000-30 Inner Spindle, Passage and Button Functions 21.50030704-002-30 Lever Stop Plate 3.10030709-000-60 Clutch Spring 0.32030712-000-30 Mounting Plate, Inner 3.00030712-001-30 Mounting Plate, Outer 2.80030718-000-30 Key Spindle, std 3.90030718-001-30 Key Spindle, IC 3.90030722-000-30 Dogging Bar 2.50030724-000-30 Lever Retaining Ring 0.52030726-000-30 Flanged Nut 6.00030726-007-30 Flanged Nut, Inner Electrified 9.20

030728-000 Push Button Cap 2.80030733-000-55 Spindle Inner 2.80

M204-198 Drill guide for locating 5/16" thru-bolt holes 8.60031416-000-70 Solenoid, Fail Safe T851 312.00031516-000-70 Solenoid, Fail secure T881 312.00031511-000-30 Hex Nut, 1/-28 Special 6.60031514-000-30 Solenoid Mount 8.50031519-000-30 Inner Spindle, T851/881 33.80

1387 Hex Key – 1/8" with Looped Handle 12.701388 Hex Wrench 29.40

A30746-000-00 Hub & Housing Assembly 12.50A30747-000-00 Hub & Plate Assembly 11.50A30749-060-00 Insert & Spindle Assembly, Outer, 6 Pin 82.00A30749-070-00 Insert & Spindle Assembly, Outer, 7 Pin 82.00A30905-001-00 Spindle & Driver Assembly, ICA30905-060-00 Spindle & Driver Assembly, 6 Pin 46.00A30906-070-00 Spindle & Driver Assembly, 7 PinA30913-000-00 Key Spindle Assembly, Inner Std.A30913-001-00 Key Spindle Assembly, Inner IC 139.00

Q330-270 T Lock Spring Cage Kit (Inside for T411 and outside for all functions except T101, T291, T411)Q330-271 T Lock Spring Cage Kit (Inside- all functions except T411 and outside for T101, T291, T301) 26.20


T-Series • Chassis and Parts

T-12

ScrewsPart Number Description Finishes Size List Price021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo $ 0.42024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4"combo 0.22

030755-005-30 Type D screw - 8-32 x 5/16" 0.32030831-004-30 Set screw for standard lever - 1/4 x 20 x 1/4" 0.46031515-004-30 Fillister Head Screw - 4-40 x 1/4" 1.70031531-006-30 Set Screw for electrified screw - 1/4-20 x 3/8" 0.40031533-006-30 Self Tap Screw - 8-32 x 3/8" 0.34002770-016-30 Mounting Screws - 10-32x1” 0.38

Chassis AssembliesPart Number

ConventionalCylinder

IC Core Description List Price

A30761-000-00 T101 Chassis $69.50A30765-000-00 T301 Chassis, T291 ChassisA30758-000-00 A30758-001-00 T351/561 ChassisA30769-000-00 A30769-001-00 T411 ChassisA30773-000-00 A30773-001-00 T501 Chassis 121.00A30756-000-00 A30756-001-00 T511 ChassisA30748-000-00 A30748-001-00 T521 ChassisA30760-000-00 A30760-001-00 T581 ChassisA30767-000-00 A30767-001-00 T381 ChassisA30759-000-00 A30759-001-00 T571 Chassis 227.00

A31517-000-00 A31517-001-00 T851 ChassisA31518-000-00 A31518-001-00 T881 Chassis 648.00

Table of Contents

Function Charts W-2

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-2

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-3

Complete Lock Pricing W-4

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-4

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-5

Options W-6

Conventional Cylinder Options . . . . . . . . . . .W-6

Complete Conventional Cylinders . . . . . . . . .W-6

Interchangeable Core & Const. Core . . . . . .W-6

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-7

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-7

Locks Less Components . . . . . . . . . . . . . . . .W-8

Tactile Warning Strip . . . . . . . . . . . . . . . . . .W-8

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-8

Miscellaneous Parts . . . . . . . . . . . . . . . . . . .W-8
















W 501 P D






Schlage CFunction

See W-2

Lock Series



W-1

Introduction W-Series

Price Book 108Effective January 31, 2011 • Rev. 1/11W-2

W-Series • Lever Functions

W101 F75 Passage LatchsetLatch bolt by levers at all times.

W161 Communicating/Exit LatchDeadlocking latch bolt by inside lever. Non-removable blank plate outside. Inside lever is always free.

W201 F77 Patio LockDeadlocking latch bolt by levers. Outsidelever is locked by push button frominside. Rotating inside lever or closingdoor releases button and unlocks outsidelever.

W301 F76 Privacy LockLatch bolt by levers. Outside lever islocked by push button in inside lever.Rotating inside lever or closing doorrelease push button and frees outsidelever. Inside lever is always free.Emergency release in outside leverunlocks door.

W501 F90 Entry LockPush button locking. Button on inside locks outside lever until unlocked by key or by rotating inside lever. Closing door release push button and unlocks door. Inside lever always free. Deadlock latchbolt.

W511 F109 Entry/Office LockDeadlocking latch bolt by levers. Turn/push button locking. Pushing and turning button locks outside lever, requiring use of a key for unlocking the door until button is manually unlocked. Pushing button locks outside lever until unlocked by key or by rotating inside lever. Inside lever is always free.

W561 F84 Classroom LockDeadlocking latch bolt by levers. Outside lever is locked by key in outside lever. Inside lever is always free.

W581 F86 Storeroom LockDeadlocking latch bolt by lever inside or key outside. Outside lever is always locked. Inside lever is always free.

W711 Apartment Entrance LockDeadlocking latch bolt by levers. Turn/push button locking. Pushing and turning button locks outside lever, requiring use of a key for unlocking the door until button is manually unlocked. Pushing button locks outside lever until unlocked by key, by rotating inside lever, or by closing door. Inside lever is always free.

W12 Dummy TrimSingle Trim-surface mounted rigid lever.


Key-In-Lever Locks

FALCON ANSI FUNCTION

Key-In-Lever Locks

FALCON ANSI & FUNCTION


W-3

Knob Functions • W-Series

W101 F75 Passage LatchsetLatch bolt by knob at all times.

W301 F76 Privacy LockLatch bolt by knobs. Outside knob islocked by push button in inside lever.Rotating inside knob or closing doorrelease push button and frees outsideknob. Inside knob is always free.Emergency release in outside knobunlocks door.

W501 F90 Entry LockPush button locking. Button on inside locks outside knob until unlocked by key or by rotating inside knob. Closing door release push button and unlocks door. Inside knob always free. Deadlocking latchbolt.

W511 F109 Entry/Office LockDeadlocking latch bolt by knobs. Turn/push button locking. Pushing and turning button locks outside knob, requiring use of a key for unlocking the door until button is manually unlocked. Pushing button locks outside knob untilunlocked by key or by rotating inside lever. Inside knob is always free.

W561 F84 Classroom LockDeadlocking latch bolt by knobs. Outside knob is locked by key in outside knob. Inside knob is always free.

W581 F86 Storeroom LockDeadlocking latch bolt by knob inside or key outside. Outside knob is always locked. Inside knob is always free.

W711 Apartment Entrance LockDeadlocking latch bolt by knobs. Turn/push button locking. Pushing and turning button locks outside knob, requiring use of a key for unlocking the door until button is manually unlocked. Pushing button locks outside knob until unlocked by key, by rotating inside knob, or by closing door. Inside knob is always free.

W12 Dummy TrimSingle Trim-surface mounted rigid knob.


Key-In-Knob Locks

FALCON ANSI FUNCTION

Key-In-Knob Locks

FALCON ANSI & FUNCTION


W-Series • Levers Complete Locks Grade 2 Medium Duty Cylindrical LocksetsANSI-A156.2, SERIES 4000, Grade 2



D Q D Q605


Single Cylinder FunctionsW501PD EntryW511PD Entry/OfficeW561PD Classroom $108.00 $120.00 $138.00W581PD StoreroomW711PD Apartment EntryNon-Keyed FunctionsW101S Passage $98.00 $110.00 $128.00W161D Communicating/ExitW201D Patio 100.00 112.00 130.00W301S PrivacyDummy TrimW12 Half Dummy $58.00 $64.00 $74.00


W-5

Knobs Complete Locks • W-Series

ELI (Elite) HAN (Hana)

Key-In-KnobDesigns and Finishes

E H


Single Cylinder FunctionsW511PD Entry/OfficeW561PD Classroom W581PD Storeroom $63.00 $75.00 $93.00W711PD Apartment EntryNon-Keyed FunctionsW101S Passage $51.00 $63.00 $81.00W301S Privacy 53.00 65.00 83.00Dummy TrimW12 Half Dummy $39.00 $51.00 $69.00


W-Series Levers • Cylinder Options




STDExample: W581P6 pinned cylinder P6 Suffix

N/CExample: W581P66 pinned Competitor keyway cylinders* P6 Suffix $5.90

Example: W581P6 (0 Bitted, KD, KA4 only)Schlage C (6 pin only) CP6 Suffix N/C

Example: W581CP6 (All other keying, not listed above)

W-Series Complete Conventional Cylinders

Cylinder MechanismPart Number Price

For All Other Functions For W561 Each6 Pin Falcon keyway cylinder Q330-154 Q330-1556 Pin Schlage C keyway cylinder Q330-152 Q330-153 $38.00

For other cylinders, see pages CYL-4 - CYL-6. —

* Competitor keyways are furnished 0 bitted. Not available Master keyed, except Schlage C

Notes: 5) Finishes for Falcon keyway cylinders are 606 and 626 only.6) Falcon cylinders are furnished G keyway unless otherwise specified.7) Restricted sections see CYL-3. See Restricted Keyway Policy for standard keyway

and policy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.






(per core)

Small format core * G SuffixExample: W581GD6 $39.00

Small format core (Best Style) * BB SuffixExample: W581BB6

Small format construction core ** H Suffix 28.40Example: W581HD6

Less Small format core B Suffix N/CExample: W581BD

Small format disposable core BDC Suffix3.50Example: W581BDC


W-7

Latch & Strike Options • W-Series

Latches with LocksSpecify

Deadlatch RestoringSpringlatch 161, 501, 511, Deadlatch

Backset Description 101, 301 561, 581 201, 501, 511, 711 Add to Lock Price

Square corner, 1-1/8" x 2-1/4" 30-209 30-203 30-2002-3/8"* Square corner, 1" x 2-1/4" 30-207 30-201 30-198

Radius corner, 1" x 2-1/4" 30-208 30-202 30-199 N/CSquare corner, 1-1/8" x 2-1/4" 30-206 30-197 30-194

2-3/4" Square corner, 1" x 2-1/4" 30-204 30-195 30-192Radius corner, 1" x 2-1/4" 30-205 30-196 30-193


ANSI, 1-1/4" x 4-7/8" standard 1-3/8" 30-148Square Corner, T-Strike 1-1/8" x 2-3/4" 1-3/8" 30-149 N/CRadius Corner, Full Lip Strike 1-5/8" x 2-1/4" 1" 30-150Square Corner, Full Lip Strike 1-5/8" x 2-1/4" 1" 30-151

Strikes as Parts Finishes: 605, 606, 613, 630


ANSI, 1-1/4" x 4-7/8" standard 1-3/8" Q330-148 Square Corner, T-strike, 1-1/8" x 2-3/4" 1-3/8" Q330-149 $8.80Radius Corner, Full Lip Strike 1-5/8" x 2-1/4" 1” Q330-150 Square Corner, Full Lip Strike 1-5/8" x 2-1/4" 1” Q330-151


Latches as Parts Finishes: 605, 606, 613, 630Specify

Deadlatch RestoringSpringlatch 161, 511, Deadlatch

Backset Description 101, 103 561, 581 201, 501, 711 Add to Lock Price

Square corner, 1-1/8" x 2-1/4" Q330-209 Q330-203 Q330-2002-3/8" Square corner, 1" x 2-1/4" Q330-207 Q330-201 Q330-198

Radius corner, 1" x 2-1/4" Q330-208 Q330-202 Q330-199 $8.80Square corner, 1-1/8" x 2-1/4" Q330-206 Q330-197 Q330-194

2-3/4" Square corner, 1" x 2-1/4" Q330-204 Q330-195 Q330-192Radius corner, 1" x 2-1/4" Q330-205 Q330-196 Q330-193


Note: 1) Specify finished when ordering.


W-Series • Misc. Parts & Options



Less standard (conventional) cylinder L SuffixExample: W581LD DAN $5.90

Less latch LLL SuffixExample: W581PD6 DAN 626 LLL 30-148 5.90

Less strike LLL SuffixExample: W581GD7 DAN 626 30-206 LLL 5.90

Tactile Warning (abrasive strip)Description Specify List Price

Abrasive Strip Preface the design code with 6 $49.40Example: W581PD6 6DA (for Dane)

Notes: 1) Outside lever only has abrasive strip application, unless otherwise specified.2) Abrasive strip not available in 613 finish.

ScrewsPart Number Description Finishes List Price

Q330-170 Screw Pack 605, 606, 613, 630 $4.80Q330-182 Screw Pack — Dummy Trim – 3.50


Q330-168 SFIC Tailpiece (throw member for levers) Q330-164 Conventional Cylinder tailpiece for entrance and storeroom functions $5.90Q330-165 Conventional Cylinder tailpiece for classroom functions Q330-169 SFIC Tailpiece (throw member for knobs)Q330-282 Inside Spring Cage Kit


X-Series

X-1

Introduction

Table of Contents

Function Chart X-2

Complete Lock Pricing X-3

Options & Parts X-4

Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-6

Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-6

Misc. Parts . . . . . . . . . . . . . . . . . . . . . . . . . . .X-6

Locks Less Components . . . . . . . . . . . . . . . .X-7

Tactile Warning . . . . . . . . . . . . . . . . . . . . . . . .X-7

Stainless Steel/Corros. Resist. Chassis . . . . .X-7

Non-Standard Door Thickness . . . . . . . . . . . .X-7















Backset 2-3/4"


X 501 P D







Schlage CFunction

See X-2

Lock Series


X101 F75 Passage/Closet LatchsetLatch bolt by knobs at all times.

X301 F76 Privacy LockLatch bolt by knobs. Outside locked bypush button in inside knob. Rotatinginside knob or closing door releases pushbutton. Emergency release in outsideknob. Emergency Release Tool M504-271.

X411 F87 Asylum Lock*Deadlocking latch bolt by key fromeither side. Both knobs rigid.

X501 F82 Entry LockPush button locking. Button on insidelocks outside knob until unlocked by keyor by rotating inside knob.

X511 F109 Entry/Office LockTurn/push button locking. Pushing andturning button locks outside knobrequiring use of key until button ismanually unlocked. Push button locking.Pushing button locks outside knob untilunlocked by key or by turning insideknob.

X521 F81 Office LockTurn button locking. Turning buttonlocks outside knob requiring use of keyuntil button is manually unlocked. Insideknob always free.

X561 F84 Classroom LockDeadlocking latch bolt by knobs. Outsideknob is locked by key in outside knob.Inside knob is always free.

X571 F90 Dormitory LockDeadlocking latch bolt by knobs exceptwhen locked by push button in insideknob. Key in outside knob locks orunlocks outside knob and releases button.Closing door releases push button. Insideknob always free.

X581 F86 Storeroom LockDeadlocking latch bolt by inside knob orkey outside. Outside knob rigid.

X12 Single Dummy TrimSingle Trim–Surface mounted.


Key-In-Knob Locks

FALCON ANSI

Key-In-Knob Locks

FALCON ANSI


X-Series • Functions

X-2



Key-In-Knob • X -Series

X-3

Grade 1 Heavy Duty Cylindrical LocksetsANSI-A156.2, SERIES 4000, GRADE 1

EG (Elite-Gala) HG (Hana-Gala)** TG (Troy-Gala)

EY (Elite-York) HY (Hana-York)** TY (Troy-York)

** Hana Knob not available in IC

Key-In-KnobDesigns and Finishes

EG EY HG HY TG TY TG TY

Function Description 626 605 606 625 613 630

Single Cylinder FunctionsX501PD EntryX511PD Entry/OfficeX521PD Entry/Office $371.00 $383.00 $401.00 $401.00X561PD ClassroomX571PD DormitoryX581PD StoreroomDouble Cylinder FunctionsX411PD * Asylum $432.00 $444.00 $462.00 $462.00

*CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard intimes of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

Non-Keyed FunctionsX101S Passage $265.00 $277.00 $295.00 $295.00X301S Privacy 330.00 342.00 360.00 360.00X12 Single Dummy trim 118.00 124.00 134.00 134.00


X-Series • Latches and Strikes

X-4

Latches with LocksFinishes: 606, 613, 630

Backset Description Specify Add to Lock PriceSquare corner, 1 1/8" x 2-1/4", std. 985359/16" radius corner, 1-1/8" x 2-1/4" 98538 N/C

3/4" proj. square corner, 1-1/8" x 2-1/4" 98835S**2-3/4"9/16" radius x 3/4" proj., 1-1/8" x 2-1/4" 98838S** $118.00

Square corner, 1" x 2 1/4" 92330 11.001/4" Radius round corner, 1" x 2-1/4" 92331

2-3/8"* Square corner, 1" x 2-1/4" 923201/4" Radius round corner, 1" x 2-1/4" 92321 11.00

5" Backset Link for 2-3/4" Backset Latch A22161-005-00 * 34.60


BacksetLatch Face

2-3/8" 2-3/4"List Price

1" Spring Latch A92320-000 A92330-0001" Deadlatch A92320-00D A92330-00D1" Spring Latch – 1/4" Radius A92321-000 A92331-0001" Deadlatch – 1/4" Radius A92321-00D A92331-00D1-1/8" Spring Latch * A98535-000 $48.80

1-1/8" Deadlatch * A98535-00D1-1/8" Spring Latch – 9/16" Radius * - A98538-0001-1/8" Deadlatch – 9/16" Radius * A98538-00D1-1/8" Deadlatch – 3/4" Projection * A98835-0SD1-1/8" Deadlatch – 9/16" Rad. X 3/4" Proj. * A98838-0SD 189.00

5" Backset Link for 2-3/4" Backset Latch A22161-005-00 34.60


ANSI, 1-1/4" x 4-7/8" standard 1-5/16" 5164Square corner, full lip 1-5/8" x 2-1/4" 1" 01-049 N/C1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" 01-048 Square Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16" 5185Vermin proof strike for ships, 9/16" radius 5133-4 $65.702 3/4" high T strike, ANSI A115.3 1 51832 3/4" high T strike, ANSI A115.3 9/16 5185-42 3/4" high T strike, ANSI A115.3 1-9/16 5186 N/C2 3/4" high T strike, ANSI A115.3 1-13/16 51872 3/4" high T strike, ANSI A115.3 2-1/16 51882 3/4" high T strike, ANSI A115.3 2-5/16 5189ANSI dust box 1" deep, steel - 005099-000-30 Dust box, 1/2" deep, use with 2-3/4" strike - 012191-003-70 Dust box, 1/2” deep, stainless steel - 012191-000-60 N/CANSI, 1-1/4" x 4 - 7/8" 7/8" 5161 N/C


Note 1): Stainless steel applications can be substituted for the 2-3/4" backsets. Specify as "S" after part number (ex: 98535S)

*Marine. For non-ferrous mechanism latches, add "0SD" for deadlatch or "00S" for spring latch to latch number. These latchesconform to the standards set forth within ANSI/BHMA 156.2, 156.5 and 156.15 and are suitable for marine applications.

Note 2): Marine Latches $17.10 Add for non-ferrous mechanism latches Add “OSD”, for deadlatch.

* 2-3/8" backset is furnished as a 1" faceplate standard.** Only available as a deadlatch.


Latches and Strikes • X-Series

X-5

Strikes sold separate Finishes: 605, 606, 613, 625, 626, 629, 630

Description Lip Length Specify List PriceANSI, 1-1/4" x 4-7/8" 1-5/16" 005164-000 $11.40 1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" Q001-048Square corner, full lip 1-5/8" x 2-1/4" Q001-049 3.50Square Corner, T-strike, 1-1/8" x 2-3/4" 1-1/8" A05185-000 2 3/4" high T strike, ANSI A115.3 9/16 A05185-0042 3/4" high T strike, ANSI A115.3 1 A05183-000

24.00

A05183-004 40.002 3/4" high T strike, ANSI A115.3 1-9/16A05186-000

2 3/4" high T strike, ANSI A115.3 1-13/16 A05187-000 2 3/4" high T strike, ANSI A115.3 2-1/16 A05188-000 44.802 3/4" high T strike, ANSI A115.3 2-5/16 A05189-000 Vermin proof strike for ships, 9/16" radius A05133-004-630 65.70ANSI dust box 1" deep, steel - 005099-000-30 2.60 ANSI dust box 1" deep, Stainless steel - 005099-000-60 8.30 Dust box, 1/2” deep, stainless steel 012191-000-60 4.90 Dust box, 1/2" deep, use with 2-3/4" strike 012191-003-70 1.80 ANS, 1-1/4" x 4-7/8" 7/8" 005161-000 11.40

X-Series Complete CylindersCylinder Mechanism Part Number Price Each

5 pin cylinder X411, 501, 511, 521, 581 E & T A231525 pin cylinder X411, 501, 511, 521, 581 H A23152-025 pin cylinder X561 – E and T designs A231515 pin cylinder X561 – H designs, 571 – E & T A23151-025 pin cylinder X571 – H designs A23151-036 pin cylinder X411, 501, 511, 521, 581 E & T A23162 $38.00

6 pin cylinder X411, 501, 511, 521, 581 H A23162-026 pin cylinder X561 – E and T designs A231616 pin cylinder X561 – H designs, 571 – E & T A23161-026 pin cylinder X571 – H designs A23161-037 pin cylinder X411, 501, 511, 521, 581 H A23172-027 pin cylinder X561 – H designs A23171-01 51.007 pin cylinder X571 – H designs A23171-02

Small Format Interchangeable CoreSmall Format Construction Core

Description Specify Add to Lock Price(per core)

Small format core * G SuffixExample: X581GD6

Small format core (Best Style) * BB Suffix $39.00

Example: X581BB6Small format construction core ** H Suffix 39.00

Example: X581HD6Less Small format core B Suffix N/C

Example: X581BDSmall format disposable core BDC Suffix 3.50

Example: X581BDC

Conventional Cylinder OptionsDescription Specify Add to Lock Price

(per core)

5 pinned cylinder P Suffix STDExample: X581P

6 pinned cylinder P6 Suffix N/CExample: X581P6

7 pinned cylinder (Hana only) P7 Suffix $11.00Example: X581P7

6 pinned Competitor keyway cylinders* P6 Suffix Example: X581P6 (0 Bitted, KD, KA4 only)

Schlage C (6 pin only) CP6 Suffix N/CExample: X581CP6 (All other keying, not listed above)

* Cylinders are furnished G keyway, keyed differently unless otherwise specified.

Notes: 1) Finishes: 606 and 626 only.2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections see Cyl-3 for charge. See Restricted Keyway Policy (p.8) for standard keyways andpolicy on use of restricted keyway cylinders. Contact 877-671-7011 for availability.




X-Series • Cylinder Options

X-6

Notes: 5) Control keys are not furnished with locks and must be ordered separately. See Cyl-10, Cyl-11 for details


Parts • X-Series

X-7

KnobsList price

Part Number Description 605 606 613

626 625 630022258-007 Knob, Troy – Closed022258-008 Knob, Troy – Emergency $66.60 $69.60 $74.60022258-009 Knob, Troy – SFIC022290-007 Knob, Troy – Button/Cylinder022950-007 Knob, Hana – Closed022950-008 Knob, Hana – Emergency 63.40 66.40 71.40022953-007 Knob, Hana – Button/Cylinder022980-007 Knob, Elite – Closed022980-008 Knob, Elite – Emergency 57.40 60.40 65.40022980-009 Knob, Elite – SFIC022981-007 Knob, Elite – Button/Cylinder

RosesList price

Part Number Description 605 606 613

626 625 630022920-000 Rose, Gala024030-000 Rose, York $23.40 $26.40 $31.40

Miscellaneous PartsPart Number Description List Price031718-000 Push button cap031719-000 Turn button cap $2.10

031748-000-70 Push button mount 6.00031749-000-70 Turn button mount 11.80

Screw packsPart Number Description Specify Finish Contents List price

A03519-000 Screw pack 605, 613, 626 024416-012 (2 ea) $2.90

ScrewsPart Number Description Finishes Size List Price024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4" combo $ .22021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo .42

Note: 1) Hana and Elite not available in 630


X-Series • Options

X-8



Less each knob LLL for knob designExample: X581PD LLL/EG $8.70

Less standard cylinder L suffixExample: X581LD EG 38.00

Less latch LLL for latchExample: X581PD EG 626 LLL/5164 31.90

Less strike LLL for strikeExample: X581PD EG 626 98535 LLL 7.60

Tactile WarningDescription Specify Add to Lock Price

Abrasive - 6 Prefix (not available in 613) Preface the design code with 6 $45.50Example: 6EG for ELITE GALA

Stainless Steel / Corrosion Resistant ChassisDescription Specify Add to Lock Price

XC – Stainless steel/non-ferrous mechanism Preface the function code with CExample: XC581 PD TG 630 $125.00

Knurled - 8 Prefix (not available in 630) Preface the design code with 8 $82.80 Example: 8EG for ELITE GALA

Non-Standard Door ThicknessDescription Specify Add to Lock Price

Door thickness over 2-1/8" - 2-1/4" Door thickness and how door is extendedExample: 2-1/4", EE $9.30

Notes: 1) Outside lever only is coated unless otherwise specified

Table of Contents

Function Chart Y-2

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-2

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-2

Complete Lock Pricing Y-3

Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-3

Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-4

Options Y-5

Complete Conventional Cylinders . . . . . . . . .Y-5

Interchangeable Core & Const. Core . . . . . . .Y-5

Conventional Cylinder Options . . . . . . . . . . . .Y-5

Locks Less Components . . . . . . . . . . . . . . . .Y-5

Non-Standard Finishes . . . . . . . . . . . . . . . . . .Y-5

Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-6

Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-6

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-6

Miscellaneous Parts . . . . . . . . . . . . . . . . . . . .Y-6

Tactile Warning Strip . . . . . . . . . . . . . . . . . . .Y-6









Certification ANSI A156.2, Series 4000, Grade 2, UL Listed for 1-1/2-Hour fire door

Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw

Strike 1-1/8" x 2-3/4", T-Strike, Square corner, no box




Backset 2-3/8" - 2-3/4" universal backset


Y 521 P D






Schlage CFunction

See Y-2

Lock Series



Y-1

Y-SeriesIntroduction

Y101 F75 Passage/Closet LatchsetLatch bolt by levers at all times.

Y161 Communicating/Exit LatchDeadlocking latch bolt by inside lever. Non-removable blank plate outside.

Y301 F76 Privacy LockLatch bolt by lever from either side except when locked by push button inside. Emergency release in outside lever. Manually returning the push button to the unlocked position releases inside and outside.

Y521 F81 Entry/Office LockDeadlocking latch bolt operated by leverexcept when outside lever is locked byturn button inside. Inside lever alwaysfree. When outside lever is locked, latchbolt is operated by key in outside lever orby rotating inside lever. Turn button mustbe manually returned to the unlockedposition to release outside lever. Lockmay be locked or unlocked by key incylinder outside.

Y561 F84 Classroom LockDeadlocking latch bolt operated by lever. Outside lever is locked by key in outside lever. Inside lever is always free.

Y581 F86 Storeroom LockDeadlocking latch bolt operated by inside lever or key outside. Rotating key in outside lever unlocks mechanism allowing lever to retract latch bolt. When key is removed, outer lever becomes rigid.

Y12 Single Dummy TrimSingle Trim-Through bolted from inside.For double trim order two singles anddrill out threads from mounting stud.


Key-In-Lever Locks

FALCON ANSI

Key-In-Knob Locks

FALCON ANSI

Y101 F75 Passage/Closet LatchsetLatch bolt by knobs at all times.

Y161 Communicating/Exit LatchDeadlocking latch bolt by inside knob. Non-removable blank plate outside.

Y301 F76 Privacy LockLatch bolt by knob from either sideexcept when locked by push buttoninside. Emergency release in outsideknob. Manually returning the push buttonto the unlocked position releases insideand outside.

Y521 F81 Entry/Office LockDeadlocking latch bolt operated by knobexcept when outside knob is locked byturn button inside. Inside knob alwaysfree. When outside knob is locked, latchbolt is operated by key in outside knob orby rotating inside knob. Turn button mustbe manually returned to the unlockedposition to release outside knob. Lockmay be locked or unlocked by key incylinder outside.

Y561 F84 Classroom LockDeadlocking latch bolt operated by knob.Outside knob is locked by key in outsideknob. Inside knob is always free.

Y581 F86 Storeroom LockDeadlocking latch bolt operated by insideknob or key outside. Rotating key inoutside knob unlocks mechanismallowing knob to retract latch bolt. Whenkey is removed, outer knob becomesrigid.

Y12 Single Dummy TrimSingle Trim-Through bolted from inside. For double trim order two singles and drill out threads from mounting stud.


Lock Features and SpecificationsY-Series • Functions

Y-2


Grade 2 Standard Duty Tubular LocksetsANSI-A156.2, SERIES 4000, Grade 2 Key-In-Lever • Y-Series

Y-3

Q (Quantum)D (Dane)


D Q605 606

Function Description 626 625 613

Single Cylinder FunctionsY521PD Entry/OfficeY561PD Classroom $162.00 $174.00 $192.00Y581PD StoreroomNon-Keyed FunctionsY101S Passage $103.00 $115.00 $133.00Y161D Communicating/Exit 116.00 128.00 146.00Y301S PrivacyDummy TrimY12 Half Dummy $50.00 $56.00 $66.00

Notes: 1) Quantum is not available as interchangeable core.2) Split designs and/or finishes are priced at the highest design and/or finish price.

H (Hana)E (Elite)

Notes: 1) Replacement parts, other than latches, cylinders and strikes, not available.2) Split designs and/or finishes are priced at the highest design and/or finish price.

* Expediting and order cancellation are not allowed after order is placed.

Y-Series Key-In-KnobDesign and Finishes

E HFunction Description 626 605 606 625 613

Single Cylinder Functions

Y521PD Entry/Office Y561PD Classroom $84.00 $96.00 $114.00 Y581PD Storeroom Non-Keyed FunctionsY101D Passage $54.00 $66.00 $84.00Y161D Exit 69.00 81.00 99.00Y301D Privacy 62.00 74.00 92.00Dummy TrimY12 Half Dummy $24.00 $30.00 $40.00


Grade 2 Standard Duty Tubular LocksetsANSI-A156.2, SERIES 4000, Grade 2Y-Series • Key-In-Lever

Y-4


Latches and Strikes • Y-Series

Y-5

Square Corner 1/4" Radius

Latches with LocksBackset Description Specify Add to Lock Price

Square corner, 1-1/8" x 2-1/4", standard 01-0452-3/4" - 2-3/8" Square corner, 1" x 2-1/4" 01-043 N/C

1/4" Radius round corner, 1" x 2-1/4" 01-044


Part Number Description Backset List PriceQ001-043 Square corner, 1" x 2-1/4"Q001-044 1/4" Radius round corner, 1" x 2-1/4" 2-3/8 - 2-3/4” $24.40Q001-045 Square corner, 1-1/8" x 2-1/4"

ScrewsPart Number Description Finishes Size List Price024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4"combo $ 0.22021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo 0.42


Q001-055 IC Tailpiece $2.30



Square Corner, T-strike, 1-1/8" x 2-3/4", standard 1-5/16" 01-046 Square corner, full lip 1-5/8" x 2-1/4" 1" 01-049 N/C1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 01-048 ANSI, 1-1/4" x 4-7/8" 1-5/16" 01-047 $6.80 ANSI dust box 1" deep, steel - 005099-000-30 $2.60

Strikes sold separateFinishes: 605, 613, 626

Description Lip Length Specify List PriceSquare Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16" Q001-046 $3.50 ANSI, 1-1/4" x 4-7/8" 1-5/16" Q001-047 11.40 1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" Q001-048 3.50 Square corner, full lip 1-5/8" x 2-1/4" 1" Q001-049 3.50 ANSI dust box 1" deep, steel - 005099-000-30 2.60


Y-Series • Options & Cylinders

Y-6

Y Series • Complete Cylinders Cylinder Mechanism Part Number Price Each

5 pin cylinder Y series A23155 $38.006 pin cylinder Y series A23165

Notes: 1) Finishes: 606 and 626 only.2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Restricted sections See CYL-3. See Restricted Keyway Policy (p. 8) for standard keyways and policy on use ofrestricted keyway cylinders. Contact Customer Service for availability.

Small Format Interchangeable Core and Small Format Construction Core Description Specify Add to Lock

Price (per core)Small format core * G Suffix

Example: Y581GD6 $39.00Small format core (Best Style) * BB Suffix

Example: Y581BB6Small format construction core ** H Suffix 28.40

Example: Y581HD6Less Small format core B Suffix N/C

Example: Y581BDSmall format disposable core BDC Suffix 3.50Example: Y581BDC



Price (per core)

5 pinned cylinder P Suffix STDExample: Y581P6 pinned cylinder P6 Suffix

Example: Y581P66 pinned Competitor keyway cylinders* P6 Suffix

Example: Y581P6 (0 Bitted, KD, KA4 only) N/CSchlage C (6 pin only) CP6 Suffix

Example: Y581CP6 (All other keying, not listed above)


Lock Price

Less standard cylinder L suffixExample: Y581LD DAN $15.30

Less latch LLL for latchboltExample: Y581PD 626 LLL 01-046 15.10

Less strike LLL for strikeExample: Y581PD 626 01-045 LLL 2.30





Y-7

Non-Standard Finishes Description Specify Add to

Lock Price

Any split finish option Finish specified O/S x I/SExample: 605 x 626 See Page Y-3, Y-4

Note: 7) 625 and or any split finish is available on a special order basis with extended lead times. Orders cannot be cancelled and product cannot be returned.

Tactile Warning (abrasive strip)Description Specify List Price

Abrasive Strip Preface the design code with 6 $46.20Example: W581PD6 6EL (for ELITE)

Notes: 1) Outside lever only has abrasive strip application, unless otherwise specified.2) Not available in 613 finish.

Notes

Price Book 108Effective January 31, 2011 • Rev. 1/11Y-8

Y-Series


Introduction Cylinders, Keys and Keying

CYL-1

Finish Codes and Descriptions*Code Description

605 (US 3) Bright Brass-Clear Coated606 (US 4) Satin Brass-Clear Coated613 (US 10B) Satin Bronze-Dark Oxidized and Oil Rubbed626 (US 26D) Satin Chromium629 (US32) Bright Stainless Steel630 (US 32D) Satin Stainless Steel

* See individual products for finish availability.


Standard Cylinder Solid Brass housings and plugs. Standard Keyway is Falcon G keyway. Keyed different furnished unless otherwise specified (additional charges may apply, see CYL-17 for keying charges) with 2 nickel silver keys. Mortise cylinder standard lengths are 1 1/8” for conventional cylinders and 1 3/8” for small format interchangeable core housings.

SFIC Furnished in A keyway unless otherwise specified. Combinated cores are provided with 2 keys.

Restricted Keyways Falcon has a varied selection of restricted keyways for conventional and SFIC cylinders based on geographic restrictions for usage. Minimum cylinder purchase required. See your Security and Safety Consultant for more information or availability.

Table of Contents

Conventional Cylinders . . . . . . . . . . . CYL-2

Interchangeable Cores . . . . . . . . . . . . CYL-7

IC Cylinders and Cabinet Locks . . . . CYL-8

Conventional Keys and Blanks . . . . . CYL-9

IC Keys and Key Blanks, Disposable Construction Core . . . . . CYL-10

Keys & Keying Construction Core Program . . . . . . . . . . . . . . . . . . . CYL-11

Cams, Tailpieces, Throw Members. . CYL-12

Cylinder Parts and Service Equipment . . . . . . . . . . . . . . . CYL-13

IC Cams, Throw Members, etc. . . . . . CYL-14

IC Service Equipment & Supplies. . . CYL-15

Keying and Stamping Charges . . . . . CYL-16

Non-IC Products

*Hotel mortise cylinders are offered as masterkeyed or “O” bitted only and must be specified.

Notes: 1) MA cam provided unless otherwise specified. 2) For 7-pin conventional add $11.003) All mortise cylinders will be furnished with cam 5622-STO, except for MA381 function which will be supplied with 5620-STD and 5621-STD. See CYL-12 for additional available cams.

4) Mortise and rim cylinders are not available in any competitor keyway, except Schlage C.5) 984D, 985D not available in 629 and 630.6) Conventional mortise cylinder with Schlage C keyway are available with 985, 986 and 951.7) Add $9.00 (list) for Falcon restricted keyways. See page iv for standard keyways. All others are restricted. Falcon conventional cylinder restricted keyways use a unique pin kit (P/N 1417) and cutter wheel for keys.

*For 7-pin cylinder add $11.00

Note: 8) Postal regulations prohibit master keying of mail box cylinders.

Miscellaneous CylindersFinishes

605Part Number Description 606, 626 613 629, 630

945 Cam lock $91.90 $93.60 $96.40950* Sliding door cylinder 35.40 - -954* Mail box cylinder 51.20 - -

951 Available in:605 606613 626629 630

945 Available in:605 606613 626629 630

950 Available in:606 626

954 Available in:606 626

985 Available in:605 606613 626629 630

986T Available in:605 606613 626629 630

985D Available in:605 606613 626625


Conventional Cylinders

CYL-2

MA and M Series Conventional Rim and Mortise CylindersPins Length Description Number 626 605 606 613 629 630

5 or 6 1-1/8 985 $53.00 $55.001-1/4 Mortise 9861-3/8 987 53.00 55.001-1/2 Mortise 988 63.00 65.00

5, 6, or 7 1-3/4 990 78.00 80.002 992 81.00 83.00

6 1-1/8 2501-1/4 251

6 1-3/8 Mortise, hotel function* 252 69.00 71.007 1-3/8 253

5, 6, or 7 – Rim 951 53.00 55.00- 1-1/8 985T- 1-1/4

Mortise, thumbturn986T

83.00 85.00

- 1 984D- 1-1/8 Dummy 985D 32.00 34.00


Key-in-Knob / Lever Type CylindersIncluding Padlock and Deadlock Insert Cylinders Conventional Cylinders

CYL-3

Non-IC Products

Note: 1) Finishes: 606 and 626 only2) Specify keyway3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.4) Add $9.00 (list) for Falcon restricted keyways. See page iv for standard keyways. All others are restricted. Falcon conventional cylinder restricted keyways use a unique pin kit (P/N 1417) and cutter wheel for keys.

Falcon Conventional Cylinders, 7 PinCylinder Mechanism Part Number List Price

7 Pin Cylinder - D111, D141 Q500-0467 Pin Cylinder - D121 Q500-0597 Pin Cylinder - D211, D241 Q500-0147 Pin Cylinder - D221 Q500-0577 pin cylinder RU/T series (except 381 IS, 571) A23171-05 $51.007 pin cylinder RU/T series 381 IS A23171-067 pin cylinder RU/T series 571 A23171-077 pin cylinder X411, 501, 511, 521, 581 H A23172-027 pin cylinder X561 – H designs A23171-017 pin cylinder X571 – H designs A23171-02

Falcon Conventional Cylinders, 5 and 6 PinCylinder Mechanism Part Number List Price

5 Pin Cylinder 955 A23151-015 Pin Cylinder B series except 611 function A23155-025 Pin Cylinder B series 611 function A23151-065 Pin Cylinder - D111, D141 Q500-0645 Pin Cylinder - D121 Q500-0665 Pin Cylinder - D131 Q500-0705 Pin Cylinder - D211, D241 Q500-0675 Pin Cylinder - D221 Q500-0695 Pin Cylinder - D231 Q500-0725 Pin Cylinder H all other functions & designs A300285 Pin cylinder H511 knobs A300405 Pin Cylinder RU/T series (except 381 IS, 571) A23151-065 Pin Cylinder RU/T series 381 IS A23151-055 Pin Cylinder RU/T series 571 A23151-075 Pin Cylinder X411, 501, 511, 521, 581 E & T A231525 Pin Cylinder X411, 501, 511, 521, 581 H A23152-025 Pin Cylinder X561 – E and T designs A231515 Pin Cylinder X561 – H designs, 571 – E & T A23151-025 Pin Cylinder X571 – H designs A23151-035 Pin Cylinder Y series A231556 Pin Cylinder 955 A23161-01 $38.006 Pin Cylinder B series except 611 function A23165-026 Pin Cylinder B series 611 function A23161-066 Pin Cylinder - D111, D141 Q500-0216 Pin Cylinder - D121 Q500-0586 Pin Cylinder - D131 Q500-0546 Pin Cylinder - D211, D241 Q500-0106 Pin Cylinder - D221 Q500-0566 Pin Cylinder - D231 Q500-0126 Pin Cylinder H101 A30028-016 Pin Cylinder H511 knobs A30040-016 Pin Cylinder RU /T series 381 IS A23161-066 Pin Cylinder RU/T series (except 381 IS, 571) A23161-056 Pin Cylinder RU/T series 571 A23161-076 Pin Cylinder X411, 501, 511, 521, 581 E & T A231626 Pin Cylinder X411, 501, 511, 521, 581 H A23162-026 Pin Cylinder X561 – E and T designs A231616 Pin Cylinder X561 – H designs, 571 – E & T A23161-026 Pin Cylinder X571 – H designs A23161-036 Pin Cylinder Y series A231656 Pin Cylinder H451, 461 hotel/motel A30036-01 51.006 Pin Cylinder W lock - except W561 (lever) Q330-1546 Pin Cylinder W561 (lever) Q330-155 38.006 Pin Cylinder W lock - except W561 (knob) Q330-2386 Pin Cylinder W561 (knob) Q330-246

Schlage Conventional Cylinders, 6 PinCylinder

MechanismFunction Keying Offered Part Number List Price

Schlage C kwy KA4, KD, 0-bit A23160-2Schlage E kwy 955 0-bit A23159-2Schlage C kwy KD, 0-bit A23160-13Schlage E kwy B except 611 0-bit A23159-13Schlage C kwy KD, 0-bit A23160-11Schlage E kwy B611, T381 IS 0-bit A23159-11Schlage C kwy KD, 0-bit A23260-3Schlage E kwy D121, 221 0-bit Q033-068Schlage C kwy KD, 0-bit, KA4 Q033-071Schlage E kwy D131, 231 0-bit Q033-067Schlage C kwy KD, 0-bit, KA4 Q033-070Schlage C kwy D141, D241 KA4, KD, 0-bit Q033-069Schlage E kwy 0-bit Q033-066Schlage E kwy H deadbolt 0-bit A23159-10Schlage C kwy KA4, KD, 0-bit A23160-7Schlage E kwy H511 knobs 0-bit A23159-7Schlage C kwy KA4, KD, 0-bit A23160-12Schlage E kwy T571 0-bit A23159-12Schlage C kwy KA4, KD, 0-bit A23160 $40.00Schlage E kwy T Except 571 & 381 IS 0-bit A23159Schlage C kwy KA4, KD, 0-bit A23160-5Schlage E kwy X411, 501, 511, 521, 581 E & T 0-bit A23159-5Schlage C kwy KA4, KD, 0-bit A23160-6Schlage E kwy X411, 501, 511, 521, 581 H 0-bit A23159-6Schlage C kwy KA4, KD, 0-bit A23160-1Schlage E kwy X561 E & T 0-bit A23159-1Schlage C kwy KA4, KD, 0-bit A23160-3Schlage E kwy X571 E & T, X561 H 0-bit A23159-3Schlage C kwy KA4, KD, 0-bit A23160-4Schlage E kwy X571 H 0-bit A23159-4Schlage C kwy KA4, KD, 0-bit A23160-8Schlage E kwy Y series 0-bit A23159-8

W Series, except W561 (Levers) MK, KA4, KD, 0-bit Q330-152Schlage C kwy W561 (Levers) MK, KA4, KD, 0-bit Q330-153

W Series, except W561 (Knobs) MK, KA4, KD, 0-bit Q330-237W561 (Knobs) MK, KA4, KD, 0-bit Q330-245

Notes: 1) Finishes: 606 and 626 only2) Specify keyway, cylinders are furnished 0-bitted unless otherwise specified.Master keying is available on Schlage C Keyway only.


Key-in-Knob / Lever Type CylindersIncluding Padlock and Deadlock Insert CylindersConventional Cylinders

CYL-4


Key-in-Knob / Lever Type CylindersIncluding Padlock and Deadlock Insert Cylinders Conventional Cylinders

CYL-5

Corbin Russwin Conventional Cylinders, 6 PinCylinder


Corbin 60 kwy KD, 0-bit A23167-2Corbin/Russ L4 kwy 955 0-bit A23174-2Russwin D1 kwy KD, 0-bit A23168-2Corbin 60 kwy KD, 0-bit A23167-13Corbin/Russ L4 kwy B Series KA4, 0-bit, KD A23174-13Russwin D1 kwy KD, 0-bit A23168-13Corbin 60 kwy KD, 0-bit A23167-11Corbin/Russ L4 kwy B611, T381 IS series KA4, 0-bit, KD A23174-11Russwin D1 kwy KD, 0-bit A23168-11Russwin D1 kwy D121, 221 KD, 0-bit Q033-074Corbin/Russ L4 kwy 0-bit Q033-079Russwin D1 kwy D131, 231 KD, 0-bit Q033-073Corbin/Russ L4 kwy 0-bit Q033-078Russwin D1 kwy D141, D241 KD, 0-bit Q033-072Corbin 60 kwy KD, 0-bit Q033-077Corbin/Russ L4 kwy 0-bit A23174-7Russwin D1 kwy H deadbolt KD, 0-bit A23167-7Corbin 60 kwy 0-bit A23168-7Corbin/Russ L4 kwy H511 knobs 0-bit A23167-10Russwin D1 kwy KD, 0-bit A23168-10Corbin 60 kwy 0-bit A23167Corbin/Russ L4 kwy T Except 571 & 381 IS KA4, 0-bit A23174Russwin D1 kwy KD, 0-bit A23168Corbin 60 kwy KD, 0-bit A23167-12Corbin/Russ L4 kwy T571 0-bit A23174-12Russwin D1 kwy KD, 0-bit A23168-12Corbin 60 kwy 0-bit A23167-6 $40.00Corbin/Russ L4 kwy X 411, 501, 511, 521, 581 H 0-bit A23174-6Russwin D1 kwy KD, 0-bit A23168-6Corbin 60 kwy 0-bit A23167-5Corbin/Russ L4 kwy X411, 501, 511, 521, 581 E & T 0-bit A23174-5Russwin D1 kwy KD, 0-bit A23168-5Corbin 60 kwy KD, 0-bit A23167-1Corbin/Russ L4 kwy X561 E & T 0-bit A23174-1Russwin D1 kwy KD, 0-bit A23168-1Corbin 60 kwy KD, 0-bit A23167-3Corbin/Russ L4 kwy X571 E & T, X561 H 0-bit A23174-3Russwin D1 kwy KD, 0-bit A23168-3Corbin 60 kwy KD, 0-bit A23167-4Corbin/Russ L4 kwy X571 H 0-bit A23174-4Russwin D1 kwy KD, 0-bit A23168-4Corbin 60 kwy 0-bit A23167-8Corbin/Russ L4 kwy Y Series 0-bit A23174-8Russwin D1 kwy KD, 0-bit A23168-8Corbin 60 kwy 0-bit Q330-166Corbin/Russ L4 kwy W Series, except W561 (Levers) 0-bit , KA4 Q330-158Russwin D1 kwy KD, 0-bit Q330-210Corbin 60 kwy KD, 0-bit Q330-167Corbin/Russ L4 kwy W561 (Levers) 0-bit , KA4 Q330-159Russwin D1 kwy KD, 0-bit Q330-211Corbin 60 kwy KD, 0-bit Q330-241Corbin/Russ L4 kwy W Series, except W561 (Knobs) 0-bit , KA4 Q330-240Russwin D1 kwy KD, 0-bit Q330-242Corbin 60 kwy KD, 0-bit Q330-249Corbin/Russ L4 kwy W561 (Knobs) 0-bit , KA4 Q330-248Russwin D1 kwy KD, 0-bit Q330-250

Notes: 1) Finishes: 606 and 626 only2) Specify keyway, cylinders are furnished 0-bitted unless otherwise specified. Master keying is not available.

Sargent Conventional Cylinders, 6 PinCylinder


955 A23166-2B Series A23166-13B611, T381 IS A23166-11H deadbolt A23166-7H511 Knobs A23166-10T Except 571 & 381 IS A23166

Sargent LA Keyway T571 KD, 0 Bit A23166-12 $40.00 X411, 501, 511, 521, 581 E & T A23166-5X411, 501, 511, 521, 581 H A23166-6X561 E & T A23166-1X571 E & T, X561 H A23166-3X571 H A23166-4Y Series A23166-8W Series, except W561 (Levers) Q330-160W561 (Levers) Q330-161W Series, except W561 (Knobs) Q330-243W561 (Knobs) Q330-251

Yale Conventional Cylinders, 6 PinCylinder


955 A23169-2B except 611 KD, 0-bit A23169-13B611, T381 IS A23169-11D121, D221 KD Q033-076D141, 241, 111, 211 Q033-075H deadbolt A23169-7H511 knobs A23169-10T Except 571 & 381 IS A23169

Yale 8 (Para) Keyway T571 A23169-12 $40.00X411, 501, 511, 521, 581 E & T A23169-5X411, 501, 511, 521, 581 H A23169-6X561 E & T KD, 0-bit A23169-1X571 E & T, X561 H A23169-3X571 H A23169-4Y series A23169-8W Series, except W561 (Levers) Q330-156W561 (Levers) Q330-157W Series, except W561 (Knobs) Q330-239W561 (Knobs) Q330-247

Notes: 1) Finishes: 606 and 626 only2) Specify keyway, cylinders are furnished 0-bitted unless otherwise specified.Master keying is not available.


Key-in-Knob / Lever Type CylindersIncluding Padlock and Deadlock Insert CylindersConventional Cylinders

CYL-6


Interchangeable Cores

CYL-7

Pricing: Uncombinated cores have no pins, springs or keys. Combinated core prices include master keying.

Finishes: 606 and 626 standard.

Packaging: Uncombinated cores are packed 20 per box.

Keyways: The “A” keyway is standard for IC products and will be supplied unless otherwise specified.A, B, C, D, DD, E, F, G, H, J, K, L, M, N, Q, R, TB and TD are equivalent to Best and Arrow IC keyways of thesame letter designations. All other keyways are restricted. Add $9.00 list for all restricted keyways.

When ordering locks or cores master keyed into existing Best, Arrow or other IC systems, a copy of the bitting listfor the existing system is required with the order. Competitors’ bitting lists are safeguarded the same as Falconbitting lists. See CYL-17.

Logo: Cores and keys are supplied with the Falcon logo standard.Combinated cores supplied without logo are furnished with plain (non-embossed) keys.

Notes: 1) For restricted keyways add $9.00 per core. See page iv for restricted keyway policies.For temporary construction cores and policy, see CYL-11.

2) For 605, 613 and 625 add $2.50 per core. Minimum 250 pieces. 3) Keying must be specified on combinated cores.

IC Products

Regular Core (suffix keyway to number)Uncombinated Combinated

Description 6-Pin 7-Pin Price 6-Pin 7-Pin Price

Standard C646 C647 $23.00 C606 C607Best style capping CB846 CB847 CB806 CB807 $39.00No logo C648 C649 $23.00 C608 C609No logo, Best capping CB848 CB849 CB808 CB809

C607 Available in:606 626

All prices are less core. Not available with C997.

IC Products

Available in:605 606613 626629 630

Available in:605 606613 625

626

Available in:605 606613 626629 630

Cabinet Locks and MiscellaneousFinishes

606, 605,Cat. No. Description 626 606, 626 605, 626 613 629, 630

C942 Cabinet lock $71.00 - - $73.00 $75.00C943 Cam lock 100.00 - - 102.00 104.00C945 Cam lock - heavy cam 71.00 - - 73.00 75.00C959 Push lock for sliding doors - $98.00 - - -C979 Rim cabinet lock - - $60.00 - -C982 Mail box lock - 58.00 - 60.00 -

Note: ) U. S. postal regulations prohibit master keying of mail box locks.


IC Cylinders & Cabinet Locks

CYL-8

MA and M Series Small Format Interchangeable Rim and Mortise Core HousingsCat. Number Length Pins Description 626 605 606 613 629 630

C987 1 3/8" 6 or 7 Mortise $33.00 $35.00C988 1 1/2" 6 or 7 MortiseC990 1 3/4" 6 or 7 Mortise 39.00 41.00 C992 2" 6 or 7 Mortise 41.00 43.00 C977 Fits Adams Rite 6 or 7 Mortise, tapered head 35.00 37.00 C997 1 3/8" 6 or 7 Mortise, unassembled, less cam 26.00 28.00 C262 1 5/8" 6 or 7 Mortise, hotel function RH 55.00 57.00 C265 1 5/8" 6 or 7 Mortise, hotel function LH C953 N/A 6 or 7 Rim 34.00 36.00

Notes: 1) All mortise cylinders will be furnished with cam 5622-STD, except for MA381 function which will be supplied with 5620-STD and 5621-STD. See CYL-12 for additional available cams.

2) C977 is only furnished with 012667-001 Adams Rite Cam

Rim Tapered Head Mortise

C943 C945 C959 C979 C982


Conventional Keys and Blanks

CYL-9

Non-IC Products

Key Blanks(Specify keyway and order in multiples of 50 except where specified)

Part Number Description Qty/Wt. Each

KB573 Standard 5-pin 50/1 $1.50KB577 Standard 6-pinKB581 Standard 7-pin 35/1 1.70KB751 Plain 5-pin (non-embossed) 50/1 1.50KB761 Plain 6-pin (non-embossed)KB771 Plain 7-pin (non-embossed) 35/1 1.70KB544 Large bow - 5-pin 25/1 3.60KB590 Large bow - 6-pin 25/1 4.20KB579 Emergency - 6-pin 50/1 6.00KB592 Emergency, large bow - 6-pin 25/1 7.00001911-001-70 Plastic handicap access bow only 1 4.70KB525 Block-O-Key construction key - 4-pin 1 3.30KB536 Block-O-Key removal tool 1 1.50Q330-215 6 Pin Schlage C Blank 1 2.10

Cut KeysPart Number Description Each

KB574 Standard 5 PinKB578 Standard 6 PinKB582 Standard 7 Pin $4.80KB794 Plain 5-pin (non-embossed)KB797 Plain 6-pin (non-embossed)KB799 Plain 7-pin (non-embossed)KB545 Large bow - 5-pin (When furnished with lock - 2 keys) additional per lock 5.50KB545 Large bow - 5-pinKB591 Large bow - 6-pin (When furnished with lock - 2 keys) additional per lock 6.50KB591 Large bow - 6-pinKB580 Emergency - 6-pin 8.30KB584 Emergency - 7-pin 9.10KB593 Emergency, large bow - 6-pin 8.60KB905 With 2" handicap access bow, 5-pin 11.20KB906 With 2" handicap access bow, 6-pinKB907 With 2" handicap access bow, 7-pin 15.10KB531 Block-O-Key construction key - 4-pin 5.30KB565 Construction key - 5-pin 5.10KB566 Construction key - 6-pinKB567 Construction key - 7-pin 5.70330055 Schlage C - 6 pin 4.80Q330-276 Schlage Split Key 6-pin 6.50

*Specify key section to key (blank) numbers.

Note: 1) Prices listed for key blanks and cut keys are for E, G and H sections only. For all other key sections add $0.80 list per key to prices shown. Letter of au tho ri za tion required for re strict ed sections;not available to stock; shipped directly to the end user.

001911-001-70 Blue Plastic Bow(not shown full size)

2” access bow meets Title 24 of The California Code for the Hand i capped.

Standard Plain(non-embossed)

Large Bow

IC Products

IC Core Key BlanksStandard Plain Both Sides Price

Standard KB628 KB718 $1.70Stamped CONTROL KB608 KB744 3.50M Series EMERGENCY KB737 KB748 5.20Blade for 2" Access Bow KB633 - 5.00Plastic Access Bow 001911-001-70 - 4.70

IC Core Cut KeysStandard Plain Both Sides

6-Pin 7-Pin 6-Pin 7-pin Price

Standard KB632-1 KB632-2 KB673-1 KB673-2 $5.20CONTROL KB609-1 KB609-2 KB778-1 KB778-2 6.60M Series EMERGENCY KB738-1 KB738-2 KB779-1 KB779-2 7.902" Access Bow KB916 KB916-1 - - 12.00

Note: 1) Specify keyway2) Order standard blanks in multiples of 50.3) Prices for key blanks and/or cut keys are for single key sections only.Key blanks 50 min. Cut keys no minimum quantity

4) For double milled key (e.g. DE, EF, FG) add $2.90 each to prices shown,minimum order quantity of 50 keys.

5) Triple and quadruple milled keys add $3.30 each to price shown, minimum order quantity of 50 keys.

6) For restricted sections add $0.80 per key Drop ship required. Not available for stock.

Best® Style SFIC Core Key BlanksStandard Plain Both Sides Price

Standard KB800* KB801* $1.70

Best® Style SFIC Core Cut KeysStandard Plain Both Sides Price

Standard 6-Pin KB807-1 KB809-1 $5.20Stamped Control 6-Pin KB811-1 KB813-1 6.60Standard 7-Pin KB807-2 KB809-2 7.90Standard Control 7-Pin KB811-2 KB813-2 12.00

Standard

StandardKey Tip

Mortise EMKTip

Best Key

Plain(non-embossed)

Clippedfor Handicap


IC Keys and Key Blanks, Disposable Construction Core

CYL-10

* KB 800 & 801 are not available in multi milled keyways.


Keys & Keying Construction Core Program

CYL-11

Notes: 1) Keyed and temporary construction cores will be installed in locks and cylinders automatically unless otherwise specified on orders.

2) Construction cores for a given project are keyed alike to one of a limited number of combinations nationwide. Different Falcon projects in the same area using the same or different contractors may use the same key. Where a higher degree of security is desired, order a set of cores in 606 or 626 finish keyed alike to a random combination. Specify “KS1.” Such cores are not returnable to Falcon but may be reused for other projects.

3) Temporary construction cores are an inexpensive alternative to interior keyed construction cores. This temporary is intended for use on interior door applications or where security on-site is not a concern.

Construction Core ProgramKeyed construction cores may be ordered with interchangeable core locks and cylinders. These cores may also be ordered separately. All keyed construction cores are assessed a non-refundable handling charge (50-231). Standard payment terms apply. Please note that this list price is only subject to a 50% discount. No additional discounts may be applied to construction cores.Features:

• 6-pin A keyway.• 7-pin A keyway.• Construction cores are a flat black finish on the face. Other colors may be provided. Contact Customer Service for available

colors.• Construction cores are furnished with no keys (NCK). Cut keys must be ordered separately.• A control key is required to install and remove construction cores. Control keys must be ordered separately.• Construction cores may be returned for credit in working condition. Credit is issued upon receipt of cores at our factory.

A Return Material Authorization (RMA) must be issued, in order for cores to be returned.

Temporary Construction Core Program (Disposable)Temporary construction cores may be ordered with interchangeable core locks and cylinders. These cores may also be orderedseparately. Standard payment terms apply. Please note that this list price is only subject to a 50% discount. No additionaldiscounts may be applied to disposable construction cores.Features:

• Conveniently fits both 6 & 7-pin SFIC applications.• No keys need to be issued.• Disposable construction cores are not returnable.• The disposable core is inserted in the lever or knob and is operated by a thumbturn, which retracts the latch bolt.

Construction Core ProgramPart Number Description Specify Price

C606CCA Construction core 6-pin Specify “H” suffix when ordering with locks, $28.40C607CCA Construction core 7-pin mortise cylinders and rim cylinders. KB632-1CCA Cut key for construction core 6-pinKB632-2CCA Cut key for construction core 7-pin 5.20

KB609-1CCA Cut control key 6-pin (order separately)KB609-2CCA Cut control key 7-pin (order separately) 6.60

1408 Disposable construction core Specify “BDC” suffix when ordering 3.5050-231F Non-refundable handling charge per core 5.00

C607CCA 1408

Non-IC Products

Conventional Mortise Cylinder Cams Part Number Application Price

1396 Cam kit for conventional cylinders $127.00 A09890-000-00 Adapter ring for 1-1/2˝ diameter cylinders 28.70 5622-STD Falcon MA CAM for conventional mortise cylinders, except MA381 33.005620-STD Falcon MA CAM for conventional mortise cylinder MA381 inside function5621-STD Falcon MA CAM for conventional mortise cylinder MA381 outside function

10-Pack PriceA08867-000-00 Falcon cyl. in Sargent and Yale (26) 48.80A09888-000-00 Falcon cyl. in Schlage L Series (13)A09894-001-00 Falcon, Ilco, Lori and Schlage cyl. in M deadbolt functions (1) 33.00A09894-002-00 Arrow, Sargent, Yale cyl. in M deadbolt functions (2)A09894-003-00 Corbin Russwin cyl. in M deadbolt functions (3)A09894-021-00 Falcon cyl. in Monarch concealed VR Delta trim (21) 48.80A09894-022-00 Arrow, Sargent, Yale cyl. in Falcon Delta trim (22)A09894-023-00 Corbin Russwin cyl. in Falcon Delta trim (23)A09897-000-00 Falcon M Series non-deadbolt functions (4) 33.00A09897-024-00 Falcon dogging cyl. in Falcon device (24) 44.70A09898-000-00 Adams Rite 4070 (16)A09899-000-00 Adams Rite MS (6) 33.00A20065-000-00 M381 outside (14)A20069-000-00 Corbin Russwin ML2200 48.80

Cylinder Tailpieces, Rim and Conventional CylindricalPart Number Application Price

1389 Tailpiece kit (assortment of tailpieces and 1416 cap tool) $159.00 B600-045 D Series double cylinder (1-3/8" - 1-3/4" doors)

1.00B600-046 D Series double cylinder (over 1-3/4" - 2-1/4" doors)B520-651 D Series single cylinder (1-3/8" - 1-3/4" doors)

2.10B520-652 D Series single cylinder (over 1-3/4" - 2-1/4" doors)Q330-164 W Series 501, 511, 581, 711 Functions

0.52Q330-165 W Series 561 Function030480-004-00 Y Series 0.74A08350-000-00 H101 0.74

10-Pack PriceA22164-000-00 X Series 561 (6 Pin) Elite & Troy 4.70A22164-001-00 X Series 561 (6 Pin) Hana, 955A22164-002-00 X Series 571 (6 Pin) Elite & Troy, 571 (7 Pin) Hana 6.70A22169-000-00 X Series 411, 501, 511, 521 (6 Pin) Elite & Troy 4.90A22169-002-00 X Series 411, 501, 511, 521 (6 & 7 Pin) HanaA28351-000-00 Rim conventional 23.00A30034-001-00 H451, H461 7.30A30038-000-00 H511 4.90A30480-004-00 B Series 7.30A30730-001-00 RU, T Series most 6-pinA30730-002-00 RU, T Series most 7-pin and T571 6-pinA30730-003-00 RU381, T381 inside 6-pin, B611 16.20A30730-004-00 RU381, T381 inside 7-pinA30730-006-00 RU571, T571 7-pin

Conventional Cylinder Tailpiece Retainers, Etc.Part Number Description 10-Pack Price

A08355-000-00 Tailpiece retainer for rim cylinder $20.50 A008395-000-00 Tailpiece retaining washer for H101 0.22A12053-000-00 Tailpiece retainer, 22164 & 22169 6.30 A24264-000-00 Tailpiece spacer 2.50 A30037-000-00 Tailpiece retainer, 30034 & 30038 6.30 B600-071 D Series Retainer Washer 1 pack / 0.20


Cams, Tailpieces, Throw Members

CYL-12

Cylinder Parts and Service Equipment


CYL-13

PIN K IT

Non-IC Products

Other PartsPart Number Application Pack Qty. Pkg. Price

008789-001-60 Wave washer - $1.10012162-000-10 Cylinder cap - 1.50031100-000-30 Hex nut for cam lock and mortise cylinders - 7.00A02750-000-00 Cam Screw 100 16.30A03039-000-00 Mortise hotel function instruction plate packet - 6.30A12165-000-00 Cap retaining pin 10 5.10A12165-100-00 Cap retaining pin 100 40.00A12166-000-00 Spring for retaining pin 100 7.20

Pin Kits, Pins, Tools and Service EquipmentPart Number Application Pack Qty. Pkg. Price

1416 Cylinder cap tool - steel $33.00 1417 Pin kit for restricted keyways (inculdes follower and cyl. Cap tool) 192.001418 Pin kit, standard (inculdes follower and cyl. Cap tool) 254.001421 Plug follower 13.301453 Depth key set, 5-pin 34.101453-1 Depth key set, 6-pin -1453-2 Depth key set, 7-pin 43.00030113-000-60 Key gauge for standard keys (.018" systems) 5.90030166-T10-30 Torx Screw Bit #10030166-T15-30 Torx Screw Bit #15 17.60030166-T20-30 Torx Screw Bit #20042613-000-60 Key gauge for restricted keyways (.025" systems) 20.3035-057 Extractor ToolA08552-000-00 Universal top pin 6.20A08553-00X-00 Bottom pins, 0 thru 9: replace; "x" with size (.018" systems)A08554-000-00 Tumbler springs 7.60A08556-000-00 Construction master pins 100 17.90A08580-00X-00 Master pins, 2 thru 9: replace; "x" with size (.018" systems)A48553-00X-00 Bottom pins, 0 thru 6: replace; "x" with size (.025" systems) 6.20A48580-00X-00 Master pins, 2 thru 6: replace; "x" with size (.025" systems

Cylinder Collars (also used for IC cylinders)605, 606

Part Number Size Shape 626 613, 625

A08790-000 9/32"A08790-001 13/32" Straight ProtectiveA08790-002 17/32" used on escutcheon $9.60 $11.60A08790-003 21/32" trimA08790-004 55/64"A08794-000 9/32"A08794-001 13/32" Tapered Protective 9.50 11.50A08794-002 17/32" used on sectional trimA08794-003 21/32"008876-000 1/8"008876-005 3/16"008876-001 1/4"008876-002 3/8" Blocking Ring 3.70 4.30

008876-003 1/2"008876-004 5/8"008862-000 n/a Rim Cylinder 3.50 4.10

See below for wave washer. Protective rings listed above include wave washer.

Doo

r R

ange

:

1³⁄₈”

to 1

⁷⁄₈"

>1⁷

⁄₈” t

o 2¹

⁄₄”

SF

IC: <

2”

D111/D211D141/D241

759-202B

256-025B

D121/D221

B520-667

NA

B220-032

D131/D231

085-202B

640-006B

540-006B

D251/D271

B520-653

AN

AN

D261/D261M

B600-041

AN

AN

”0.2

1.265” 0.67”2.875” 2.4”

0.95”

156-025B

”6.1

1.4” 1.03” 0.45”

Price Book 108Effective January 31, 2011 • Rev. 1/11CYL-14

IC Cams, Throw Members, etc.

IC Mortise Cylinder CamsPart Number Description Price1397 Cam kit $164.00

10-Pack Price5622-IC Falcon MA CAM for SFIC mortise cylinders, except MA3815620- IC Falcon MA CAM for SFIC mortise cylinders MA381 inside function5621-IC Falcon MA CAM for SFIC mortise cylinders MA381 outside functionA12667-000-00 Sargent / Yale (7)A12667-001-00 Adams Rite MS (8)A12667-002-00 Adams Rite 4070A12667-003-00 Straight (5), M series non-deadbolt functionsA12667-006-00 Corbin Russwin master ring (25) (requires bushing A09890) $44.60 pkg of 10A12667-007-00 M series deadbolt functions (10)A12667-008-00 Schlage L Series (12)A12667-011-00 Corbin Russwin, Arrow (11)A12667-013-00 Corbin Russwin DL4000A12667-020-00 Falcon concealed vertical rod Delta trim (20)A12667-03A-00 Sargent 7737A20278-000-00 M381 outside (15)

IC Throw Members (Tailpieces) and Spacers for Cylindrical Locksets022175-000-30 X Series except X571, new style022175-001-30 X571 new style 6-pin022175-002-30 X571 new style 7-pin030739-000-30 RU, T Series most 6-pin

$2.20030739-001-30 RU, T Series most 7-pin030739-002-30 RU381, T381 inside 6-pin030739-003-30 RU381, T381 inside 7-pinQ001-055 B & Y SeriesQ330-168 W Series Levers 3.10Q330-169 W Series Knobs 3.10

A12689-000-00 Rim $8.10 pkg. of 10A12698-000-00 Retainer, IC rim cylinder $12.60 pkg. of 10A12742-001-00 Coupler and tailpiece D Series 3.90

Cylinder CollarsSee page CYL-13 for cylinder collars. –

Other PartsA12663-001-00 Throw pins, package of ten (10)A12663-002-00 Throw pins, package of ten (10)A12663-003-00 Throw pins, package of ten (10) $9.90 pkg.A12663-004-00 Throw pins, package of ten (10)A12664-010-00 Drive washer, package of ten (10)002807-000-30 Mortise cylinder security screw 0.52

IC Products


IC Service Equipment & Supplies

CYL-15

IC Products

ToolsPart Number Description Price Each1208 Key bitting punch machine, standard A2 System $2,649.001392 Capping pin, Best style capping 27.401393 Capping block, Best style capping 127.001398 Core and key stamping fixture 148.001400 IC mortise cyl. assy./ disassembly tool set w/punch 190.001401 IC mortise cyl. assy./ disassembly tool 174.001402 IC cam staking center punch 15.901405 Ejector tool 18.001407 Mortise cylinder installation wrench 29.601411 Pinning block set, Falcon spring cover cores 99.501414 Pinning block only, Falcon spring cover cores 66.301415 Tamping Plate 36.30012612-000-60 Key Gauge (A2 System) 12.10012727-000-30 Emergency tool, for M301, 311, 321 2.10030425-000-60 Key Gauge (A4 System) 12.10031034-000-30 A4 System depth bar for key bitting punch 181.00

Pin Kits1404 (standard) Pin kit, A2 System complete in wooden case; Falcon spring cover cores1391 Pin kit, A2 System complete in wooden case; Best style capping $595.001403 Pin kit, A4 System complete in wooden case; Falcon spring cover cores1390 Pin kit, A4 System complete in wooden case; Best style capping

Pins, Springs, etc.A12635-0xx-00 A2 top pins, #2 through #19; replace “xx” with size, 100/pkgA12636-0xx-00 A2 bottom pins, #0 through #9; replace “xx” with size, 100/pkg $9.10 pkgA30375-0xx-00 A4 top pins, #1 through #11; replace “xx” with size, 100/pkgA30376-0xx-00 A4 bottom pins, #0 through #5; replace “xx” with size, 100/pkgA12637-000-00 Tumbler Spring, 100/pkg. 7.60 pkgA12637-500-00 Tumbler Spring, 500/pkg. 25.10 pkgA12638-000-00 Caps for Best style cores, 500/pkg.A12639-001-00 Spring cover, 6-Pin, 100/pkg. 22.90 pkgA12639-002-00 Spring cover, 7-Pin 100/pkg.

Keying and Stamping Charges

Price Book 108Effective January 31, 2011 • Rev. 1/11CYL-16

Master KeyingPart Number Description List Price

50-210F Conventional cylinder Master Keyed (MK), Grand Master Keyed (GMK), $11.70Emergency Master Keyed (EMK), and Single Keyed (SKD) groups

–Interchangeable core Master Keyed (MK), Grand Master Keyed (GMK), No ChargeEmergency Master Keyed (EMK), and Single Keyed (SKD) groups

Construction Keying – Conventional CylinderPart Number Description List Price

50-211F Cylinder Construction Keyed (CK) $3.8050-224F Cylinder Block-O-Keyed (BOK)60-000F Pack change keys independently for construction keying No Charge

Other Keying (Non-Masterkeyed)Part Number Description List Price

–Cylinder keyed different (KD) or keyed alike to a Falcon selectedcombination (KA) in sets of 2 or more

No Charge

– Cylinder 0-bitted or 1-bitted, as applicable No Charge50-212F Conventional cylinder keyed to a specific combination $6.5050-215F Standard cylinder extra key charge 4.8050-232F IC core extra key charge 5.2060-001F Pack change keys independently for non-construction keying 0.40 per key

Notes: 1) Any cylinder operated by keys other than its own change key, or Single Keyed (SKD) groups within amasterkey system are subject to masterkeying charges. The Falcon Masterkey department determinesand makes the final decision in the selection and use of key. 100% system expansion is allowed fornew masterkey systems, unless otherwise specified.

2) Construction keyed cylinder charges are in addition to masterkeying charges.

3) PKI (Pack Keys Independently) packaging is included at no additional charge.

4) Construction keying is not available with SFIC cylinders. Construction cores may be ordered for interchangeable core locks and for mortise and rim cylinders, for use during construction. See Construction Core Program.

5) Block-O-Key construction keying requires 6-pin cylinders.

6) Construction keys must be ordered separately. See Keys & Keyblanks.

7) Conventional cylinders are available 0-bitted.

8) Conventional restricted key section cylinders are furnished 1-bitted unless otherwise specified.

9) Falcon locks and cylinders are furnished with Falcon G key section, keyed differently (KD) unlessotherwise specified.

10) Falcon SFIC cylinders are furnished with A keyway, uncombinated, without keys when not specified.

11) SFIC cylinders are furnished uncombinated without keys when not specified.

12) All 50-xxx charges are subject to a 50% discount unless quoted otherwise.

13) All 50-xxx charges are added as separate line items and priced separately.

Keying and Stamping Charges


CYL-17

Bitting Lists (Keying Transcripts)Part Number Description List Price

50-123F Bitting list for factory masterkeyed products (requires written authorization from end-user on letterhead) $130.00

50-120F Establish new masterkey system for field masterkeying, up to 50 bittings. 118.0050-121F Each additional bitting for field masterkeying. 0.80

- Request special quotation for large or complex systems -

Residential MasterkeyingPart Number Description List Price

50-223F Residential style masterkeying $3.80

Special & Custom Die StampsPart Number Description List Price

50-219F Keys stamped with custom or special dies – i.e, STATE OF FLORIDA, DO NOTDUPLICATE, etc. $1.40

50-230F Die with standard letter and/or numbers – die remains property of Falcon Lock Co. 844.00

50-234F Die with custom logo or typeface – die remains property of Falcon Lock Co. Send art work forquotation

Key & Core StampingPrice

Part Number Description Standard I-CoreVKC – Visual Key Control, standard symbols (AA1, AA2, etc. on keys (2)

50-216F and/or cylinders. Designate CKC for I-Core marked on side. CKC not $3.40 - available for standard cylinders.

50-217F VKC – Visual Key Control, per extra key (more than 2 per lock) 1.40 $1.40

50-233F Non-standard code letters or numbers than industry standard key symbols on key (5 max.) 3.40 3.40

50-226F Non-standard code letters or numbers than industry standard key symbols on core or cylinder (5 max.) 3.40 3.40

50-229F Serial numbering (in addition to any other stamping) per key 1.40 1.40


Notes

CYL-18


MSC-1

MiscellaneousIntroduction

Table of Contents

Padlocks MSC-2

Complete Lock Pricing MSC-3

Cable Locks MSC-4

Auxiliary Products MSC-5

Padlocks . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5

Padlocks, Parts and Accessories . . . . . . .MSC-6

Complete Padlocks MSC-8

Lock Mounts . . . . . . . . . . . . . . . . . . . . . . .MSC-9


Notes: 1) Key is removable with shackle in locked position only.2) Falcon padlocks now discount as complete locks and not as parts.

PadlocksFinish

Cat No. Description 606

955-1P Deadlocking type - 1" shackle $112.40955-2P Deadlocking type - 2" shackle 121.90955-6P Deadlocking type - 6" shackle

Padlocks Available in:606

OptionsDescription Price

Cylinders5-pin (drilled for 6) Standard6-pin No Charge7-pin (per cylinder) $8.40Less cylinder Deduct $16.00Competitor’s keyways in standard cylinder model (see page 8) No ChargeKeyingMaster keying, conventional cylinder See CYL-16Construction master keying, con ven tion al cylinder See CYL-16


Auxiliary Products

MSC-2


Padlocks • Auxiliary Products

MSC-3

Standard Features for Commercial Series Padlocks - StockCertification Meets or exceeds ASTM standards for standard steel shackle, shackle cutting and

corrosion resistance.Lock Body Chrome plated brass - resists corrosion.Shackle Hardened steel alloy, double deadbolt locking mechanism.Cylinder* Accepts Falcon 6 or 7-pin small format interchangeable core (SFIC), as well as SFIC products from

other manufacturers.

*All padlocks supplied less cylinder. Cylinders must be ordered separately.

Important Ordering InformationLocks must be ordered in case quantities; this does not apply to factory ordered Falcon branded 955 Series locks.

Case quantity is listed with each product. All prices listed are unit prices. Note: All Falcon cylinders will ship

separately.

Introduction

Standard Features for Commercial Series Cables - Interchangeable CoreLock Head Die-cast zinc, 407 satin finishCable Braided steel vinyl coated for greater cut resistance than twisted cablesCylinder* Accepts Falcon 6 or 7-pin small format interchangeable core (SFIC), as well as SFIC products from

other manufacturers.

*All cables supplied less cylinder. Cylinders must be ordered separately.

KC Series - 2', 4' lengths40 Series - 3/8" Shackle diameter

10 Series - 1/4" Shackle diameter 20 Series - 5/16" Shackle diameter

Price Book 108Effective January 31, 2011 • Rev. 1/11MSC-4

Auxiliary Products • Cable Locks


MSC-5

Commercial Series • Auxiliary Products

Notes: 1) Product is shipped without cylinder. For cylinder options: see Cylinders.2) Keying options: see Keys & Keying. See Terms & Conditions for more information.3) Case quantity is 6.

Notes: 4) Product is shipped without cylinder. For cylinder options: see Cylinders.5) Keying options: see Keys & Keying. See Terms & Conditions for more information.6) Case quantity is 1.

Padlocks - Small Format Interchangeable Core (SFIC) - Less Cylinder Shackle Dimensions

Part Number A B C List PriceSolid Brass Body - KS11 2 Series (Body Dimensions: 1 25/32" wide, 2 3/16 " high, 7/8" thick) KS11D1200 1/4" (6.4mm) 1 1/2" (38mm) 3/4" (19mm) $33.70 KS11F1200 2" (51mm) 35.10 Chrome Plated Brass Body - KS21 Series (Body Dimensions: 1 25/32" wide, 2 3/16" high, 7/8" thick)KS21D1200 5/16" (8mm) 1 1/2" (38mm) 3/4" (19mm) $35.80 KS21F1200 2" (51mm) 37.50 Chrome Plated Brass Body - KS41 Series (Body Dimensions: 1 15/16" wide, 2 3/16" high, 7/8" thick) KS41D1200 3/8" (9.5mm) 1 1/2" (38mm) 3/4" (19mm) $35.80 KS41F1200 2" (51mm) 37.50

Cables - SFIC - Less Cylinder

Part Number Cable Diameter Cable Length List PriceBraided Steel Key Cable - KC2 SeriesKC215A130 5/8" (15mm) 2' (60cm) $67.90KC215B130 5/8" (15mm) 4' (121cm) 72.70



separately.

Padlocks

Note: 1) Case quantity is 6.

10 Series Shackles

3/4” 1 1/2” 2“ 4“

40 Series Shackles

3/4” 1 1/2” 2“ 4“

20 Series Shackles

3/4” 1 1/2” 2“ 4“

Note: 2) Case quantity is 6.

Commercial Series: Replacement ShacklesShackle Dimensions

Part Number A B C List PriceHardened Steel Shackle - For Use with 10 Series PadlocksKZ11A10 3/4" (19mm) $5.90 KZ11D10 1/4" (6.4mm) 1 1/2" (38mm) 3/4" (19mm) 7.20KZ11F10 2" (51mm) 7.30 KZ11G10 4" (102mm) 10.30 Hardened Steel Shackle - For Use with 20 Series PadlocksKZ11A20 3/4" (19mm) $7.20 KZ11D20 5/16" (8mm) 1 1/2" (38mm) 3/4" (19mm) 8.90KZ11F20 2" (51mm) 9.30KZ11G20 4" (102mm) 12.90 Hardened Steel Shackle - For Use with 40 Series PadlocksKZ11A40 3/4" (19mm) $9.00 KZ11D40 3/8" (9.5mm) 1 1/2" (38mm) 3/4" (19mm) 12.70 KZ11F40 2" (51mm) 13.40 KZ11G40 4" (102mm) 18.40 Brass Shackle - For Use with 10 Series PadlocksKZ12A10 3/4" (19mm) $5.90 KZ12D10 1 1/2" (38mm) 3/4" (19mm) 7.20 KZ12F10 1/4" (6.4mm) 2" (51mm) 7.30 KZ12G10 4" (102mm) 10.30 Brass Shackle - For Use with 20 Series PadlocksKZ12A20 3/4" (19mm) $7.20 KZ12D20 5/16" (8mm) 1 1/2" (38mm) 3/4" (19mm) 8.90 KZ12F20 2" (51mm) 9.30 KZ12G20 4" (102mm) 12.90 Brass Shackle - For Use with 40 Series PadlocksKZ12A40 3/4" (19mm) $9.00 KZ12D40 3/8" (9.5mm) 1 1/2" (38mm) 3/4" (19mm) 12.70 KZ12F40 2" (51mm) 13.40 KZ12G40 4" (102mm) 18.40

Commercial Series: AccessoriesPart Number Description List PriceNickel Plated Steel ChainKZ200AL Retaining 9" Nickel Plated Steel Chain $9.00



separately.


Auxiliary Products • Commercial Series Padlocks, Parts and Accessories


Commercial Series • Auxiliary Products

MSC-7

Parts and Accessories - Stock

Note: 1) Case quantity is 30 except: KZ38BA1, KZ38BA2 - case quantity 20; KZ3700 - case quantity 6; KZ390AL - case quantity 1.

Commercial Series - Replacement PartsPart Number Description List PriceKit - Padlock & Cables KZ390AL Service Repair Kit $529.00 Replacement Parts - Padlocks - SFIC KZ35AA1 Shackle Spring, 10 Series $0.54 KZ35AA2 Shackle Spring, 20 Series, 80 Series 0.54 KZ35AA3 Shackle Spring, 40 Series, 90 Series 0.54 KZ35AA4 Shackle Spring, 70 Series 0.54 KZ35AB1 Shackle Mounting Screw, 10, 20, 40 Series 1.60 KZ35AB2 Shackle Mounting Screw, 70,80,90 Series 1.60 KZ35AC1 Locking Ball Bearing, 10,20,40,80, 90 Series 1.20 KZ35AC2 Locking Ball Bearing, 70 Series 1.70 KZ35EC1 Bumper, 10, 20 Series 0.84 KZ35EC2 Bumper, 40 Series 0.84 KZ35EC3 Bumper, 80 Series 0.84 KZ35EC4 Bumper, 90 Series 0.84 KZ31CA1 Locking Cam, 10,20,40,80,90 Series 2.70 KZ31CA2 Locking Cam, 70 Series 2.70 KZ31CB1 Key Retaining Locking Cam, 10,20,40,80,90 Series 1.60 KZ31CB2 Key Retaining Locking Cam, 70 Series 1.60 KZ31CC1 Steel Retainer Plate, 10,20,40,80,90 Series 1.30 KZ31CC2 Steel Retainer Plate, 70 Series 1.30 KZ31CD0 Steel Retainer Plate Screw 2.00 KZ31DA0 Throw Member 3.10 KZ37000 Installation Tool 4.10 Replacement Parts - CablesKZ33CA0 Throw Member, SFIC $5.10 KZ33DB0 Washer, SFIC 0.54 KZ34DC0 Throw Member Mounting Screw, SFIC 1.30 KZ36EA0 Dust Cover, SFIC 2.20 KZ36EB0 Dust Cover Screw, SFIC 0.74

Dust Cover Screws

Dust Cover

Cylinder

Lock Head

Washer

Throw MemberMounting Screw

Kryptonite by Schlage Commercial Padlock SeriesExploded View - SFIC

KS Series Padlock PartsExploded View - SFIC

KC Series Cable Parts

SFIC

Throw Member


Auxiliary Products • Complete Padlocks

MSC-9

Special Security • Auxiliary Products


855101 855118 855125 855132

855149 994848

Specialty Security ProductsSecurity Hasps

Part Number Body Dimension Price Each

855101 8 1/2" x 4 1/2" 3 $42.50

855118 7 3/4" x 1 3/4" 6 13.40

855125 5" x 2" 6 12.90

855132 4 1/4" x 1 5/8" 6 14.90

855149 7 1/4" x 1 5/8" 6 13.40

Hasp

994848 4 1/2" x 1 5/8 6 $6.90

Lock MountsPart Number For Product Backset Price

21 B, T and W Lever Series22 D, X, Y and W Knob Series23 H Series24 RU Series35-MA MA Series (101)36-MA MA Series (371, 381, 411, 431, 441) 2-3/4" $103.0037-MA MA Series (521, 551, 561, 581)38-MA MA Series (301, 311, 321)39-MA MA Series (531, 541, 571, 621, 641)40-MA MA Series (451)002086-000-70 Acrylic Mounting Ring N/A 29.10

No. 21 No. 22 No. 23 No. 24 No.35-410 No. 002086-000-70


Auxiliary Products • Lock Mounts

Note: 1) For MA Series, locks must be 1-3/4" door thickness and left handed.


Product Index

Index-1

005099-000 . . . . . . . . . . . . . . . . . . . . . . . . .MA-11001911-001-70 . . . . . . . . . . . . . . . . .CYL-9, CYL-10002086-000-70 . . . . . . . . . . . . . . . . . . . . . .MSC-10002762-000 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11002770-016-30 . . . . . . . . . . . . . . . . . . .RU-11, T-12002807-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14005075 . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8005099-000 . . . . . . . . . . . . . . . . . . . . .MA-11, RU-4005099-000-30 . . . . . .B-5, H-5, T-9, X-4, X-5, Y-5005099-000-60 . . . . . . . . . . . . . . . . . . . . . . . . . .X-5005161-000 . . . . . . . . . . . . . . . . . . . . .B-5, T-9, X-5005164-000 . . . . . . . . . . .B-5, H-5, RU-4, T-9, X-5008789-001-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-13008862-000 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13008876-000 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13008876-001 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13008876-002 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13008876-003 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13008876-004 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13008876-005 . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1301-043 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-501-044 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-501-045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Y-501-046 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5, Y-501-048 . . . . . . . . . . . . . . . . . . . . .B-5, T-9, X-4, Y-501-049 . . . . . . . . . . . . . . . . . . . . .B-5, T-9, X-4, Y-5012162-000-10 . . . . . . . . . . . . . . . . . . . . . . .CYL-13012191-000-60 . . . . . . . . . . . . . . . . . . . . . .X-4, X-5012191-003-70 . . . . . . . . . . . . . . . . . . . . . .X-4, X-5012612-000-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-15012727-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-15021164-016 . . . . . .B-7, H-5, RU-11, T-12, X-7, Y-5022104-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11022105-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11022106-002-55 . . . . . . . . . . . . . . . . . . .RU-11, T-11022108-000-60 . . . . . . . . . . . . . . . . . . .RU-11, T-11022112-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11022175-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14022175-001-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14022175-002-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14022258-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022258-008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022258-009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022290-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022920-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022950-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022950-008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022953-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022980-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022980-008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022980-009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022981-007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7022986-001-50 . . . . . . . . . . . . . . . . . . .RU-11, T-11024030-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7024416-012 . . . . . .B-7, H-5, RU-11, T-12, X-7, Y-5030113-000-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-13030166-T10-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-13030166-T15-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-13030166-T20-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-13030290 . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8030425-000-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-15030480-004-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12030703-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030704-002-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030706-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030709-000-60 . . . . . . . . . . . . . . . . . . .RU-11, T-11030712-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030712-001-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030718-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030718-001-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030722-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030724-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030726-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030726-007-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11030728-000 . . . . . . . . . . . . . . . . . . . . . .RU-11, T-11030733-000-55 . . . . . . . . . . . . . . . . . . .RU-11, T-11030739-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14030739-001-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14030739-002-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14

1397 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-141398 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151402 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151403 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151404 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151405 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151407 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151408 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-111411 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151414 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151415 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151416 . . . . . . . . . . . . . . . . . . . . . . . .CYL-12, CYL-131417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-131418 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-131421 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-131453 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-131453-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-131453-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1321 . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5, MSC-1022 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1023 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1024 . . . . . . . . . . . . . . . . . . .MA-10, CYL-9, MSC-10250 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-7251 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2252 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2253 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2314691 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4314692 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4314693 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4314694 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-431471S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4315491 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4315492 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4315493 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4315494 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4330055 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-935-057 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1335-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1036-071 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-836-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1037-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1038-031 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-838-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1039-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1040-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-1050-120F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-121F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-123F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-210F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1650-211F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1650-212F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1650-215F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1650-216F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-217F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-219F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-223F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-224F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1650-226F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-229F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-230F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-231F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1150-232F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1650-233F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1750-234F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-175133-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-45161 . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5, T-9, X-45164 . . . . . . . . . . . . . . . . .B-5, B-6, RU-4, T-9, X-45183 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-45185 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-45185-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-45186 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-45187 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-45188 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-45189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-45620- IC . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-145620-STD . . . . . . . . . . . . . . .CYL-2, CYL-8, CYL-125621-IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-14

030739-003-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-14030740-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030740-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030740-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030742-000 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030742-001 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030742-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030744-000 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030744-001 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030744-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030755-005-30 . . . . . . . . . . . . . . . . . . .RU-11, T-12030831-004-30 . . . . . . . . . . . . . . . . . . .RU-11, T-12030926-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030926-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030926-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030927-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030927-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030927-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030928-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030928-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030928-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030929-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030929-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030929-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030930-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030930-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030930-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030996-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-10030996-002 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10030996-003 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10031034-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-15031100-000-30 . . . . . . . . . . . . . . . . . . . . . . .CYL-13031416-000-70 . . . . . . . . . . . . . . . . . . .RU-11, T-11031452-000 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-10031453-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031471 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031471-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031471-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031472 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031472-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031473 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031473-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031474 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031474-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031477 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031477-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4031511-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11031514-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11031515-004-30 . . . . . . . . . . . . . . . . . . . . . . . . .T-12031519-000-30 . . . . . . . . . . . . . . . . . . .RU-11, T-11031531-006-30 . . . . . . . . . . . . . . . . . . . . . . . . .T-12031533-006-30 . . . . . . . . . . . . . . . . . . .RU-11, T-12031541-006-30 . . . . . . . . . . . . . . . . . . . . . . . .RU-11031700-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6031701-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6031702-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6031703-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6031705-000-30 . . . . . . . . . . . . . . . . . . . . . . . . . .B-7031718-000 . . . . . . . . . . . . . . . . . . . . . . . . .B-7, X-7031719-000 . . . . . . . . . . . . . . . . . . . . . . . . .B-7, X-7031741-000-50 . . . . . . . . . . . . . . . . . . . . . . . . . .B-7031748-000-70 . . . . . . . . . . . . . . . . . . . . . . . . . .X-7031749-000-70 . . . . . . . . . . . . . . . . . . . . . . . . . .X-7042613-000-60 . . . . . . . . . . . . . . . . . . . . . . .CYL-1310-064 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-810-087 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-810-092 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-810-094 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-810-095 . . . . . . . . . . . . . . . . . . . . . . .D100-8, D200-812-626 . . . . . . . . . . . . . . . . . . . . . . .D100-7, D200-71208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151387 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11, T-111388 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11, T-111389 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-121390 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151391 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151392 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151393 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-151396 . . . . . . . . . . . . . . . . . . . . . . . . .MA-11, CYL-12


Product Index

Index- 2

5621-STD . . . . . . . . . . . . . . .CYL-2, CYL-8, CYL-125622-IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-145622-STD . . . . . . . . . . . . . . . . . . . . .CYL-8, CYL-1257420 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557421 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557425 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557430 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557431 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557435 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5, B-657620 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557621 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557625 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557630 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557631 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-557635 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-560-000F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1660-001F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-1661-509 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-761-510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7855101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9855118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9855125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9855132 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9855149 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-992320 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-492321 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-492330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-492331 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4945 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-8950 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2951 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2954 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2955-1P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-2955-2P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-2955-6P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-2984D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2985 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-298535 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-498538 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4985D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2987 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-8988 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-898835S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-498838S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4990 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-8992 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-2, CYL-8994848 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-9A008395-000-00 . . . . . . . . . . . . . . . . . . . . . .CYL-12A02750-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A03039-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A03519-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-7A05133-004-630 . . . . . . . . . . . . . . . . . . . . . . . . .X-5A05183-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5A05183-004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5A05185-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-5A05185-004 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-5A05186-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5A05187-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5A05188-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5A05189-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-5A08350-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A08355-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A08552-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08553-00X-00 . . . . . . . . . . . . . . . . . . . . . .CYL-13A08554-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08556-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08580-00X-00 . . . . . . . . . . . . . . . . . . . . . .CYL-13A08790-000 . . . . . . . . . . . . . . . . . . . . . . . . . CYL-13A08790-001 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08790-002 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08790-003 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08790-004 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08794-000 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08794-001 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08794-002 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08794-003 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-13A08867-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09888-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09890-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12

A23160-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23161 . . . . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23161-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A23161-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23161-03 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23161-05 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23161-06 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23161-07 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23162 . . . . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23162-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23165 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A23165-02 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A23166 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23166-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23167 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23167-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23168-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23169 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23169-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6A23171-01 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23171-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23171-05 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23171-06 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23171-07 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23172-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23174 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5

A09894-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09894-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09894-003-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09894-021-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09894-022-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09894-023-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09897-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09897-024-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09898-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A09899-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A12053-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A12165-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A12165-100-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A12166-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-13A12635-0xx-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12636-0xx-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12637-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12637-500-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12638-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12639-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12639-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A12663-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12663-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12663-003-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12663-004-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12664-010-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-003-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-006-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-007-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-008-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-011-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-013-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-020-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12667-03A-00 . . . . . . . . . . . . . . . . . . . . . . CYL-14A12689-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12698-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A12742-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A20065-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A20069-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A20278-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-14A22161-005-00 . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A22164-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A22164-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A22164-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A22169-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A22169-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A23151 . . . . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23151-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A23151-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23151-03 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23151-05 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23151-06 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23151-07 . . . . . . . . . . . . . . . . . .RU-8, T-4, CYL-3A23152 . . . . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23152-02 . . . . . . . . . . . . . . . . . . . . . . .X-6, CYL-3A23155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A23155-02 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A23159 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-4A23159-10 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23159-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-11 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-12 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-13 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A23160-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4


Product Index

Index- 3

A23174-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23174-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5A23260-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4A24264-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A28351-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30028 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A30028-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A30034-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30036-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A30037-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30038-000-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A30040-01 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3A30375-0xx-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A30376-0xx-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-15A30480-004-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30730-001-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30730-002-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30730-003-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30730-004-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30730-006-00 . . . . . . . . . . . . . . . . . . . . . . .CYL-12A30746-000-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30747-000-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30748-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30748-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30749-060-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30749-070-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30753-00 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10A30753-01 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10A30756-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30756-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30758-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30758-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30759-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30759-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30760-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30760-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30761-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30765-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30767-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30767-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30769-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30769-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30773-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30773-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A30905-001-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30905-060-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30906-070-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30913-000-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A30913-001-00 . . . . . . . . . . . . . . . . . . .RU-11, T-11A31469-001 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-002 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-003 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-004 . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-01D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-02D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-03D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31469-04D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31517-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A31517-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A31518-000-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A31518-001-00 . . . . . . . . . . . . . . . . . . . . . . . . .T-12A31544-00 . . . . . . . . . . . . . . . . . . . . . .RU-10, T-10A31549-01D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31549-02D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31549-03D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31549-04D . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-4A31706-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31707-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31708-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31708-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31708-002 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31708-003 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31709-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31709-001-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31714-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6

A92330-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A92330-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A92331-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A92331-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A98535-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A98535-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A98538-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A98538-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A98835-0SD . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4A98838-0SD . . . . . . . . . . . . . . . . . . . . . . . . . . . .X-4AE77012-IE . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AE77012-IT . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AE77012-OC . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AE77012-OK . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AE77012-OP . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AE77012-OT . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AE77029-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AE77100-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AE77140-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AE77280-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AE77526-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AS5813 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11AS75319 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76029-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76100-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76140-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76280-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76319 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76526-L/RH . . . . . . . . . . . . . . . . . . . . . . .MA-10AS76853 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10B302-041 . . . . . . . . . . . . . . . . . . . . D100-7, D200-7B302-045 . . . . . . . . . . . . . . . . . . . .D100-7, D200-7B520-283 . . . . . . . . . . . . . . . . . . . .D100-8, D200-8B520-298 . . . . . . . . . . . . . . . . . . . .D100-9, D200-9B520-649 . . . . . . . . . . . . . . . . . . . .D100-8, D200-8B520-650 . . . . . . . . . . . . . . . . . . . .D100-8, D200-8B520-651 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12B520-652 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12B520-662 . . . . . . . . . . . . . . . . . . .D200-9, D200-10B520-663 . . . . . . . . . . . . . . . . . . .D200-9, D200-10B600-018 . . . . .D100-7, D100-9, D200-7, D200-10B600-045 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12B600-046 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12B600-047 . . . . . . . . . . . .D100-9, D200-9, D200-10B600-048 . . . . . . . . . . . . . . . . . . .D200-9, D200-10B600-053 . . . . . . . . . . . .D100-9, D200-9, D200-10B600-066 . . . . . . . . . . . .D100-9, D200-9, D200-10B600-071 . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-12B600-078 . . . . . . . . . . . .D100-9, D200-9, D200-10B600-100 . . . . . . . . . . . .D100-9, D200-9, D200-10B600-101 . . . . . . . . . . . .D100-9, D200-9, D200-10C262 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C265 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C603-897 . . . . . . . . . . . .D100-9, D200-9, D200-10C606CCA . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-11C607 . . . . . . . . . . . . . . . . . . . . . . . . .CYL-7, CYL-11C607CCA . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-11C942 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C943 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C945 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C953 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C959 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C977 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C979 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C982 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C987 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C988 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C992 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8C997 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-8E77012-IB . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77012-IC . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77012-IK . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77012-IP . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77306 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11E77307 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11

A31714-001-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31715-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31715-001-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31716-000-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31716-001-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31727-005-00 . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A31739-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31739-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31750-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31750-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31751-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31751-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31764-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6A31767-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-7A48553-00X-00 . . . . . . . . . . . . . . . . . . . . . .CYL-13A48580-00X-00 . . . . . . . . . . . . . . . . . . . . . .CYL-13A57420-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57420-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57421-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57421-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57425-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57425-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57430-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57430-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57431-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57431-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57435-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57435-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57620-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57620-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57621-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57621-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57625-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57625-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57630-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57630-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57631-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-5A57631-00D . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57635-000 . . . . . . . . . . . . . . . . . . . . . . . .B-5, H-5A57635-00D . . . . . . . . . . . . . . . . . . . . . . . . B-5, H-5A74420-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A74421-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A74425-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A74430-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A74431-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A74435-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A76429-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A76439-000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-5A7801-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7802-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7804-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7805-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7806-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7807-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7808-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7809-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7813-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7814-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7815-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7816-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7819-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7820-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7821-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7822-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7829-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7830-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7831-xx . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7851-12-xx . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7851-24-xx . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7881-12-xx . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A7881-24-xx . . . . . . . . . . . . . . . . . . . . . . . . .MA-10A8737-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9A8737-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9A8737-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9A8737-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9A8737-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9A92320-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A92320-00D . . . . . . . . . . . . . . . . . . . . . . . . T-9, X-4A92321-000 . . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4A92321-00D . . . . . . . . . . . . . . . . . . . . . . . .T-9, X-4


Product Index

Index- 4

F605-359 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-10J250-028 . . . . . . . . . . . . . . . . . . . . .D100-8, D200-8J520-028 . . . . . . . . . . . . . . . . . . . . .D100-9, D200-9KB525 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB531 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB536 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB544 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB545 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB565 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB566 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB567 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB573 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB574 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB577 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB578 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB579 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB580 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB581 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB582 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB584 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB590 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB591 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB592 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB593 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB608 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB609-1 . . . . . . . . . . . . . . . . . . . . .CYL-10, CYL-11KB609-1 . . . . . . . . . . . . . . . . . . . . . . . .CCA CYL-11KB609-2 . . . . . . . . . . . . . . . . . . . . . CYL-10, CYL-11KB609-2CCA . . . . . . . . . . . . . . . . . . . . . . . .CYL-11KB628 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB632-1 . . . . . . . . . . . . . . . . . . . . .CYL-10, CYL-11KB632-1CCA . . . . . . . . . . . . . . . . . . . . . . . .CYL-11KB632-2 . . . . . . . . . . . . . . . . . . . . .CYL-10, CYL-11KB632-2CCA . . . . . . . . . . . . . . . . . . . . . . . .CYL-11KB633 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB673-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB673-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB718 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB737 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB738-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB738-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB744 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB748 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB751 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB761 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB771 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB778-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB778-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB779-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB779-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB794 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB797 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB799 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB807-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB807-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB809-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB809-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB811-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB811-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB813-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB813-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB905 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB906 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB907 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9KB916 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KB916-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-10KC215A130 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KC215B130 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KS11D1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KS11F1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KS21D1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KS21F1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KS41D1200 . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-5KS41F1200 . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-5KZ11A10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11A20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11A40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11D10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11D20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11D40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6

Q330-168 . . . . . . . . . . . . . . . . . . . . . . .W-8, CYL-14Q330-169 . . . . . . . . . . . . . . . . . . . . . . .W-8, CYL-14Q330-170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-8Q330-175 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7Q330-176 . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7Q330-177 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7Q330-178 . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7Q330-182 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-8Q330-210 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-211 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-215 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9Q330-237 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q330-238 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q330-239 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-240 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-241 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-242 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-243 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-245 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q330-246 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q330-247 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-248 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-249 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-250 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-251 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-253 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7Q330-254 . . . . . . . . . . . . . . . . . . . . . . . . . . .D200-7Q330-256 . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7Q330-257 . . . . . . . . . . . . . . . . . . . . . . . . . . .D100-7Q330-270 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-11Q330-271 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-11Q330-272 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11Q330-273 . . . . . . . . . . . . . . . . . . . . . . . . . . . .RU-11Q330-276 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-9Q330-282 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W-8Q500-010 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-012 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-014 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-021 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-046 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-054 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-056 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-057 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-058 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-059 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-064 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-066 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-067 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-069 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-070 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q500-072 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3R525-256 . . . . . . . . . . . . . . . . . . . .D100-9, D200-9S76012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-10S76206 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76306 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76307 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76802 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76806 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S76816 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11S77801-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77804-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77805-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77811-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77815-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77816-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77819-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9S77820-LL . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-9

KZ11F10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11F20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11F40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ11G10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ11G20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ11G40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ12A10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ12A20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ12A40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ12D10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ12D20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ12D40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ12F10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ12F20 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ12F40 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-6KZ12G10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ12G20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ12G40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ200AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-6KZ31CA1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31CA2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31CB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31CB2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31CC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31CC2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31CD0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ31DA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ33CA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ33DB0 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ34DC0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AA1 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AA2 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AA3 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AA4 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AB2 . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35AC2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35EC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35EC2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35EC3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ35EC4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ36EA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ36EB0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7KZ37000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .MSC-7KZ390AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . MSC-7M204-198 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T-11PE1396 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MA-11Q001-046 . . . . . . . . . . . . . . . . . . . . . .B-5, H-5, Y-5Q001-048 . . . . . . . . . . . . . . .B-5, H-5, T-9, X-5, Y-5Q001-049 . . . . . . . . . . . . . . .B-5, H-5, T-9, X-5, Y-5Q001-055 . . . . . . . . . . . . . . . . . . . . . . . .Y-5, CYL-14Q033-066 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q033-067 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q033-068 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q033-069 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q033-070 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q033-071 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q033-072 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q033-073 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q033-074 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q033-075 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q033-076 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q033-077 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q033-078 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q033-079 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-152 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q330-153 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-4Q330-154 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q330-155 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-3Q330-156 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-157 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-158 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-159 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-160 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-161 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-6Q330-164 . . . . . . . . . . . . . . . . . . . . . . .W-8, CYL-12Q330-165 . . . . . . . . . . . . . . . . . . . . . . .W-8, CYL-12Q330-166 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5Q330-167 . . . . . . . . . . . . . . . . . . . . . . . . . . . .CYL-5

Price Book 2011 • Effective January 31, 2011 • Rev. 1/11

Prices subject to change without notice

Table Of ContentsGeneral Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Factors Affecting Exit Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3New Nomenclature Conversion Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Exit Devices19-R Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-619-V Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-819 Series Device Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 924-R Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1224-V Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1424-C Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1624-C-WDC Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-1824 Series Device Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1925-R Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-2225-V Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-2425-M Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-2625-C Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-2825-C-WDC Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-3025 Series Device Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-32XX-R Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-36XX-V Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-38XX-M Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-40XX-C Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-42XX-C-WDC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-44XX Series Device Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

AccessoriesPowers Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 33Electric Power Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 33DE5101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 33Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Trim - How to Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Trim / Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-53Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Cylinder Dogging Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Dummy Touch Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Electric and Alarm Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Extension Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Mortise Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Mullions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Sex Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Shim Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57SLM Blocking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Parts19 Series Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5824 Series Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-6025 Series Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-62XX Series Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63-6419 Series Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 658500 Mortise Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Mullions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6524 Series Trim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66-6725 Series Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Maintenance Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69-70Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71-72

1 Price Book 2011 • Effective January 31, 2011 • Rev. 1/11


General InformationAll products listed meet ANSI A156.3 Grade 1 standard.

Devices will be furnished for hollow metal doors 3'0" x 7'0" x 1-3/4" full flush, with 5/8" high frame stopsunless specified otherwise.

DOOR WIDTHSEXIT DEVICES for door widths exceeding 4'0" are custom applications. Specify the exact door width and consultfactory for price and availability. For device widths on narrow stile aluminum and glass doors, consult factory.

DOOR THICKNESSEXIT DEVICES are furnished at prices listed for door thicknesses of 1 3/4" with standard centerlines. Other doorthicknesses and/or offset installations may require additional charges for the device, trim, control and/or strike.Consult factory.

DOOR HEIGHTS/DEVICE CENTERLINESURFACE and CONCEALED VERTICAL ROD DEVICES for heights over 7'0" up to 8'0", extension rods are furnishedat no additional charge. For heights over 8'0" up to 10'0" extension rods are furnished at prices shown on page 56.For doors higher than 10'0" or when centerline is other than standard, specify exact height. Consult factory for price.

161 OR 86 DOOR PREPARATIONSWhen devices will apply over a 161 or 86 door preparation, consult factory.

DEVICE MOUNTING SCREWSMachine screws are furnished with Fire Exit Devices. Sheet metal screws are furnished with Panic Devices. Machinescrews can be substituted at no additional charge, specify AMS.

SUBSTITUTION OF OUTSIDE TRIM OR STRIKESWhen other than standard is desired, deduct price of standard and add price of item used. Check catalog forcompatibility.

ELECTRIC ACCESSORIESWhen specifying Electrical Products, consult catalog or factory to insure all coordinating accessories have beenconsidered. All electric devices must use respective power supply for warranty to apply.

FINISHESBHMA US Description BHMA US Description

600 USP Prime Coat 626 US26D Chromium, dull605 US3 Brass, polished 628 US28 Anodized Aluminum606 US4 Brass, dull 629 US32 Stainless Steel, polished612 US10 Bronze, dull 630 US32D Stainless Steel, satin613 US10B Brass, dull--oxidized--oil rubbed 689 SP28 Lacquer Sprayed Aluminum619 US15 Satin Nickel Plated, Clear-coated 695 SP313 Sprayed Duranodic622 US19 Dull Black, painted 710 313AN Anodized Duranodic625 US26 Chromium, polished

Reference Notes:When split finish is desired, the finish listed first is understood to be the outside finish.SP28 and SP313 contain certain exposed parts that are molded from black plastic material or black powder coated finish.

2Price Book 2011 • Effective January 31, 2011 • Rev. 1/11


A Door Width

Specify exact door width. This determines what size device is supplied. If door width not specified, 3' is furnished standard.

B Stile Width

Determines which series can be used because of the dimension of the active or inactive case. In conjunction with the door width, the width of the device is also affected.

C Door Height

Rod lengths and extension rod requirements for surface vertical or concealed vertical rod devices are determined byheight.

D Undercut

Bottom rods and bottom latches or bolts for vertical rodapplications are affected by the distance between the bottom of the door and the surface to which the strike will apply; 1/4" minimum, 3/4" maximum.

E Thickness

When trim is used with a device it is affected by thickness as is the length of fasteners and cylinders.

F Stop Height

The type of strike and affect on backsets is determined by the stop (5/8" standard)

Glass Bead

In the case of touch bar devices, series 19, 24 and 25, glazing bead or trim can interfere with the device requiring shim kits with modified trim and/or device.

Fire Labels

As a component of a fire door assembly, exit devices must meet special requirements.

Other

Factors such as transom panels, sill conditions and astragals can affect exit device selection

Pairs

When devices will occur on paired door leaves, order themtogether.

Materials

Unusual door or frame materials can affect device selection such as channel iron frames, blade stop frames, hollow coredoors and mineral core doors.

Factors Affecting Exit Devices

A

C

E

B

D

F

(To finished floor)

LHR

RHR

RHR LHR

LHR LHR

Handing Diagrams

Same Egress – Double Door

Double Egress – Double Door

Single Door

Single Door

How to Order


How to Order Sequence ExampleEL F 25 V L-DANE US3 3' LHR LBR SNB WD

PrefixesCD Cylinder DoggingLD Less DoggingRX Touchbar Request to ExitDM Latchbolt and Device Monitor SwitchLM Latchbolt Status SwitchKOR Key Bypass SwitchED Electric DoggingEL Electric Latch RetractionFSA Electric Lock or Unlock Trim-Fail SafeFSE Electric Lock or Unlock Trim-Fail SecureEA Exit AlarmHWEA Hardwire Exit Alarm

RatingF Fire Exit HardwareBlank Panic Exit Hardware

Device Series19 Touch Bar Device24 Touch Bar Device, Narrow Stile25 Touch Bar DeviceXX Crossbar Device

Device TypeR Rim C Concealed Vertical rodV Surface Vertical Rod C-WDC Concealed Vertical rodM Mortise Wood Door

Trim Function (see Trim pages for all functions)

EO Exit Only K KnobDT Dummy Trim L Lever (Dane Standard)NL Night Latch TL Thumb LeverC Cylinder Trim Less Pull NL-OP Night Latch Pull by otherTP Thumbpiece KIL Key in Lever

Latch OptionDL Dead Locking

FinishUS3 US10 US26 US32 SP28US4 313AN US26D US32D SP313

Door Width 3' Standard Default4'

HandingRHR Right Hand ReverseLHR Left Hand Reverse

Less Bottom RodLBR Less Bottom RodLBR-AFL LBR w/Auxiliary Fire Pin

AccessoriesCYL Cylinder SNB Sex Bolts AMS All Machine ScrewsSK Shim Kit SLM SLM Blocking

Other Miscellaneous Door Information (see page 9 for details)HMD Hollow Metal Door SCDC Steel Channel Door Construction _ Door Label (20 min, 45 min, 90 min 1-1/2 hr)

HMF Hollow Metal Frame _ Specify other Door or Frame _ Stile WidthWD Wood Door Material information _ Frame Stop HeightWDF Wood Frame _ Door Height SGL Single DoorALD Aluminum Door _ Door Thickness PR Pair of Doors Swinging Same DirectionALF Aluminum Frame _ Door Undercut DE Double Egress Doors

Door Thickness1-3/4" Standard2-1/4" Optional

Not all options are available on all series, consult customer service.

For Special Order Product Quotes: Email: [email protected] Fax: 1-877-730-6248



Conversion Table17 Series to 24 Series 18 Series to 25 SeriesOld New Trim Old New Trim(F)17-R (F)24-R No Change (F)18-R (F)25-R See Below(F)17-V (F)24-V No Change (F)18-V (F)25-V See Below(F)17-C (F)24-C No Change (F)18-C (F)25-C See Below(F)17-C-WDC (F)24-C-WDC No Change (F)18-C-WDC (F)25-C-WDC See Below

(F)18-M (F)25-M See Below

18 Series to 25 Series TrimOld Old Trim New Old Old Trim New812L Lever Trim 510L 810TP Apollo 512TP812L-NL Lever Trim 510L-NL 810NL Apollo 512NL812L-DT Lever Trim 510L-DT 810DT Apollo 512DT812L-BE Lever Trim 510L-BE 810TP-BE Apollo 512TP-BE816L Vandal Resistant 511L 811K Knob 513K820TP Vanguard 512TP 811K-NL Knob 513K-NL820NL Vanguard 512NL 811K-DT Knob 513K-DT820DT Vanguard 512DT 811K-BE Knob 513K-BE820TP-BE Vanguard 512TP-BE 717DT Delta 717DT

814KIL Key in Lever Discontinued

17/18 Strikes to 24/25 StrikesOld New 24 Series 25 Series CommentsF490 299 X X Need 650106 retrofit kit for existing prepF490 299F X X Need 650106 retrofit kit for existing prep565 1439 X XF570 299 X X Need 650106 retrofit kit for existing prepF570 299F X X Need 650106 retrofit kit for existing prep571 1609 X X579 1606 Not recommended XNo Equivalent 499F Not offered XNo Equivalent 264 X X

P

19 Series Trim ChangesOld New Trim/Control Old New Trim/Control1953DT 920DT Trident 1910L 912L-Dane Control1955P 920NL Trident 1910L-NL 912L-NL-Dane Control1904 PULL ONLY 917DT Centron 1920L LS/LK 912L-BE-Dane Control2301BE 930EO Centron 1980L-DT 912L-DT-Dane Control2303DT 930DT Centron 1919L 912L-Quantum Control2302C 930C Centron 1919L-NL 912L-NL-Quantum Control2305P 930NL Centron 1929L LS/LK 912L-BE-Quantum Control1909P 910NL Control 1989L-DT 912L-DT-Quantum Control1906T 910TP Control 1912L 912L-Sutro Control1926T LS/LK 910TP-BE Control 1912L-NL 912L-NL-Sutro Control1908DT 910DT Control 1922L-BE 912L-BE-Sutro Control1907K 911K Control 1982L-DT 912L-DT-Sutro Control1907K-NL 911K-NL Control 2400KIL w/IC Core 914KIL-IC Key in Lever1927K LS/LK 911K-BE Control 2400KIL 914KIL-KD Key in Lever1937K-DT 911K-DT Control 2401KIL LS/LK 914KIL-BE Key in Lever1911L 912L AVALON Control 2402KIL-NL 914KIL-NL-KD Key in Lever1911L-NL 912L-NL AVALON Control1921L LS/LK 912L-BE AVALON Control1981LDT 912L-DT AVALON Control



19-R Device SeriesDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

EXIT HARDWARERim Devices SP28(Price includes F570 Strike) Trim/Control SP313 US32D

19-R-EO - 321 582Trident Trim

19-R-DT 920DT 365 62619-R-NL 920NL 397 658

Centron Trim

19-R-EO 930EO 361 62219-R-DT 930DT 365 62619-R-NL 930NL 382 64319-R-C 930C 375 63619-R-DT 917DT 356 617

Control Trim

19-R-DT 918DT 449 81519-R-NL 918NL 449 815

19-R-DT 910DT 449 81519-R-NL 910NL 449 81519-R-TP 910TP 449 81519-R-TP-NL 910TP-NL 449 81519-R-TP-BE 910TP-BE 449 815

Knob Control

19-R-K 911K 449 81519-R-K-BE 911K-BE 449 81519-R-K-NL 911K-NL 449 81519-R-K-DT 911K-DT 449 815

Dane Lever Control

19-R-L 912L 498 85419-R-L-BE 912L-BE 498 85419-R-L-NL 912L-NL 498 85419-R-L-DT 912L-DT 498 854

Key in Lever

19-R-KIL 914-KIL-KD 534 79519-R-KIL-NL 914-KIL-NL-KD 534 79519-R-KIL-BE 914-KIL-BE 534 79519-R-KIL-IC 914-KIL-IC 583 844

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 48. For Standard and Optional Strikes, refer to page 46.For KIL functions with US32D device, trim finish is furnished SP28. Cylinders provided at no charge.Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified.Handing: 920 Series trims are handed and not field reversible. Specify handing RHR or LHR.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available 2/28/2011.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting.

Note: prices shown are for 3' length, for 4' length add $25.00 to list price.

●

■

●

●

●

●

■

■

▲

▲

▲

▲

●

●

●

●

●

●

✽

✽

◆

◆

◆

◆

◆

●

●

●

●

▲

✽

◆

◆



Device Series F-19-R Devices are priced 3', complete with standard trim and strikes.

Cylinders are not included in price unless noted.

FIRE EXIT HARDWARERim Devices SP28(Price includes F570 Strike) Trim/Control SP313 US32D

F-19-R-EO – 406 681Trident Trim

F-19-R-DT 920DT 450 725F-19-R-NL 920NL 482 757

Centron Trim

F-19-R-EO 930EO 446 721F-19-R-DT 930DT 450 725F-19-R-NL 930NL 467 742F-19-R-C 930C 460 735F-19-R-DT 917DT 441 716

Control Trim

F-19-R-DT 918DT 534 914F-19-R-NL 918NL 534 914

F-19-R-DT 910DT 534 914F-19-R-NL 910NL 534 914F-19-R-TP 910TP 534 914F-19-R-TP-NL 910TP-NL 534 914F-19-R-TP-BE 910TP-BE 534 914

Knob Control

F-19-R-K 911K 534 914F-19-R-K-BE 911K-BE 534 914F-19-R-K-NL 911K-NL 534 914F-19-R-K-DT 911K-DT 534 914

Dane Lever Control

F-19-R-L 912L 583 953F-19-R-L-BE 912L-BE 583 953F-19-R-L-NL 912L-NL 583 953F-19-R-L-DT 912L-DT 583 953

Key in Lever

F-19-R-KIL 914-KIL-KD 619 894F-19-R-KIL-NL 914-KIL-NL-KD 619 894F-19-R-KIL-BE 914-KIL-BE 619 894F-19-R-KIL-IC 914-KIL-IC 668 943

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 48. For Standard and Optional Strikes, refer to page 46. For KIL functions with US32D device, trim finish is furnished SP28. Cylinder provided at no charge.Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified.Handing: 920 Series trims are handed and not field reversible. Specify handing RHR or LHR.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available 2/28/2011.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting. SexBolts are required and added to the order for additional center case mounting when device is used with wood, composite ornon-reinforced hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 2729 List AddAll Applications 2 $13


●

■

●

●

●

●

▲

▲

▲

▲

■

■

●

●

●

●

●

●

●

●

●

●

✽

✽

◆

◆

◆

◆

◆

▲

✽

◆

◆



19-VDevice Series Devices are priced 3', complete with standard trim and strikes. Cylinders and Sex Bolts are not included in price unless noted.

EXIT HARDWARESurface Vertical Rod Devices SP28(Price includes 3788 and 2130 Strikes ) Trim/Control SP313 US32D

19-V-EO – 487 963Trident Trim

19-V-DT 920DT 531 100719-V-NL 920NL 563 1039

Centron Trim

19-V-EO 930EO 527 100319-V-DT 930DT 531 100719-V-NL 930NL 548 102419-V-C 930C 541 101719-V-DT 917DT 522 998

Control Trim

19-V-DT 918DT 615 119619-V-NL 918NL 615 1196

19-V-DT 910DT 615 119619-V-NL 910NL 615 119619-V-TP 910TP 615 119619-V-TP-NL 910TP-NL 615 119619-V-TP-BE 910TP-BE 615 1196

Knob Control

19-V-K 911K 615 119619-V-K-BE 911K-BE 615 119619-V-K-NL 911K-NL 615 119619-V-K-DT 911K-DT 615 1196

Dane Lever Control

19-V-L 912L 664 123519-V-L-BE 912L-BE 664 123519-V-L-NL 912L-NL 664 123519-V-L-DT 912L-DT 664 1235

Key in Lever

19-V-KIL 914-KIL-KD 700 117619-V-KIL-NL 914-KIL-NL-KD 700 117619-V-KIL-BE 914-KIL-BE 700 117619-V-KIL-IC 914-KIL-IC 749 1225

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 48. For Standard and Optional Strikes, refer to page 46. For KIL functions with US32D device, trim finish is furnished SP28. Cylinders provided at no charge.For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10', see page 56 for extension rod add.Handing: 19-V Devices are handed and field reversible. Devices and handed Trim are furnished RHR when handing is not specified.Handing: 920 Series Trim are handed and not field reversible. Specify handing RHR or LHR.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available 2/28/2011.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting.Optional Sex Bolts are recommended for latch mounting when device is used with hollow core, composite or light gaugehollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 2729 List AddAll Applications 6 $39


■

▲✽◆

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

▲

▲

▲

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

■

●

✽

✽

◆

◆

◆

◆

◆

◆



Device Series F-19-VDevices are priced 3', complete with standard trim and strikes.


FIRE EXIT HARDWARESurface Vertical Rod Devices SP28(Price includes 3788 and 2130 Strikes ) Trim/Control SP313 US32D

F-19-V-EO – 624 1088Trident Trim

F-19-V-DT 920DT 668 1132F-19-V-NL 920NL 700 1164

Centron Trim

F-19-V-EO 930EO 664 1128F-19-V-DT 930DT 668 1132F-19-V-NL 930NL 685 1149F-19-V-C 930C 678 1142F-19-V-DT 917DT 659 1123

Control Trim

F-19-V-DT 918DT 752 1321F-19-V-NL 918NL 752 1321

F-19-V-DT 910DT 752 1321F-19-V-NL 910NL 752 1321F-19-V-TP 910TP 752 1321F-19-V-TP-NL 910TP-NL 752 1321F-19-V-TP-BE 910TP-BE 752 1321

Knob Control

F-19-V-K 911K 752 1321F-19-V-K-BE 911K-BE 752 1321F-19-V-K-NL 911K-NL 752 1321F-19-V-K-DT 911K-DT 752 1321

Dane Lever Control

F-19-V-L 912L 801 1360F-19-V-L-BE 912L-BE 801 1360F-19-V-L-NL 912L-NL 801 1360F-19-V-L-DT 912L-DT 801 1360

Key in Lever

F-19-V-KIL 914-KIL-KD 837 1301F-19-V-KIL-NL 914-KIL-NL-KD 837 1301F-19-V-KIL-BE 914-KIL-BE 837 1301F-19-V-KIL-IC 914-KIL-IC 886 1350

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 48. For Standard and Optional Strikes, refer to page 46. For KIL functions with US32D device, trim finish is furnished SP28. Cylinders provided at no charge.For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10', see page 56 for extension rod add.Handing: F-19-V Devices are handed and field reversible. Devices and handed Trim are furnished RHR when handing is not specified.Handing: 920 Series Trim are handed and not field reversible. Specify handing RHR or LHR.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available 2/28/2011.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting. SexBolts are required and added to the order for additional latch case mounting when device is used with wood, composite ornon-reinforced hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 2729 List Add

All Applications 6 $39


●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

▲

▲

▲

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

■

✽

✽

◆

◆

◆

◆

◆

■

▲✽◆

●

◆



19 Device OptionsCylinder DoggingNot for use with Fire Exit HardwarePrefix List Add

CD Cylinder Dogging available on all 19 series Panic Devices. 57LD Less Dogging available on all 19 series panic devices 25

Less Bottom RodSuffix

LBR Available with UL Fire Label at no additional charge on F-19-V devices. NCFire rated LBR devices must be ordered in pairs of Vertical Rod Devices.

For Fire Rated Devices specify one device LBR and second device LBR-AFL. Second device provided with a Fire Pin.

Device MonitoringPrefix List Add

RX Touch Bar Request to Exit Switch available on all 19 series devices. 203RX device monitoring switch can be used in combination with a second RX switch.Add $203 list.

KOR Key Override - Override device monitoring on a door by use of a keyed cylinder. 53KOR must be used in combination with a device monitoring switch.

Exit AlarmPrefix List Add

EA Exit Alarm available on all 19 series Rim Panic and Fire Devices. 372Not recommended for use with 19 Vertical Rod Panic or Fire Devices.Not available with KOR. 9 Volt battery included.

HWEA Hard-Wired Exit Alarm available on all 19 series Rim Panic and Fire Devices. 761Not recommended for use with 19 Vertical Rod Panic or Fire Devices.PS902 Power Supply required and must be used for warranty to apply.Not available with KOR. See page 20 for pricing,

HWK Hard-Wired Adapter for field installation to eliminate 9 volt battery,order part number 650305 389



Notes

EXIT HARDWARERim Devices

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US324-R-EO ― 948 1203 1007 1161 1208 1232 1208 1232 1319

948 1203 1007 1161 1208 1232 1208 1232 131924-R-NL-OP ―Delta Trim

24-R-DT 717DT 1099 1387 1191 1378 1425 1449 1359 1383 1536718DT 1239 1368 1172 1394 1441 1465 1499 1523 1552718NL 1099 1387 1191 1378 1425 1449 1359 1383 1536718C 1066 1354 1158 1326 1373 1397 1326 1350 1484718TP 1199 1537 1341 1495 1542 1566 1459 1483 1653718TP-BE 1199 1537 1341 1495 1542 1566 1459 1483 1653

710DT 1090 1408 1212 1419 1466 1490 1350 1374 1577710NL 1090 1408 1212 1419 1466 1490 1350 1374 1577710TP 1090 1408 1212 1419 1466 1490 1350 1374 1577710TP-BE 1090 1408 1212 1419 1466 1490 1350 1374 1577

711K 1090 1408 1212 1419 1466 1490 1350 1374 1577

711K-NL 1090 1408 1212 1419 1466 1490 1350 1374 1577711K-BE 1090 1408 1212 1419 1466 1490 1350 1374 1577

711K-DT 1090 1408 1212 1419 1466 1490 1350 1374 1577

712L 1230 1501 1305 1480 1527 1551 1490 1514 1638712L-BE 1230 1501 1305 1480 1527 1551 1490 1514 1638712L-NL 1230 1501 1305 1480 1527 1551 1490 1514 1638712L-DT 1230 1501 1305 1480 1527 1551 1490 1514 1638

24-R-DT24-R-NL24-R-C24-R-TP24-R-TP-BE

Control Trim24-R-DT24-R-NL24-R-TP24-R-TP-BE

Knob Control24-R-K24-R-K-BE24-R-K-NL24-R-K-DT

Dane Lever Control24-R-L24-R-L-BE24-R-L-NL24-R-L-DT

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 49-50. For Standard and Optional Strikes, refer to page 46.

24 Series devices with trims furnished in SP313.Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trimAvailable until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood, composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 325 Sex Bolt 425 List AddEO (exit only device) 2 4 $64Device with Trim Not Required 4 32

Device Series 24-RDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

(Price includes 299 Strike)






EXIT HARDWAR E Rim Devices

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 F-24-R-EO ― 1111 1366 1170 1324 1371 1395 1371 1395 1482

1111 1366 1170 1324 1371 1395 1371 1395 1482F-24-R-NL-OP ―Delta Trim

F-24-R-DT 717DT 1354 1541 1546 1699 1612 1402 1550 1522 1588718DT 1402 1531 1335 1557 1604 1628 1662 1686 1715718NL 1262 1550 1354 1541 1588 1612 1522 1546 1699718C 1229 1517 1321 1489 1536 1560 1489 1513 1647718TP 1362 1700 1504 1658 1705 1729 1622 1646 1816718TP-BE 1362 1700 1504 1658 1705 1729 1622 1646 1816

710DT 1253 1571 1375 1582 1629 1653 1513 1537 1740710NL 1253 1571 1375 1582 1629 1653 1513 1537 1740710TP 1253 1571 1375 1582 1629 1653 1513 1537 1740710TP-BE 1253 1571 1375 1582 1629 1653 1513 1537 1740

711K 1253 1571 1375 1582 1629 1653 1513 1537 1740711K-BE 1253 1571 1375 1582 1629 1653 1513 1537 1740711K-NL 1253 1571 1375 1582 1629 1653 1513 1537 1740711K-DT 1253 1571 1375 1582 1629 1653 1513 1537 1740

712L 1393 1664 1468 1643 1690 1714 1653 1677 1801712L-BE 1393 1664 1468 1643 1690 1714 1653 1677 1801712L-NL 1393 1664 1468 1643 1690 1714 1653 1677 1801712L-DT 1393 1664 1468 1643 1690 1714 1653 1677 1801

F-24-R-DT F-24-R-NL F-24-R-C F-24-R-TP F-24-R-TP-BE

Control Trim F-24-R-DT F-24-R-NL F-24-R-TP F-24-R-TP-BE

Knob Control F-24-R- K F-24-R-K-BE F-24-R-K-NL F-24-R-K-DT

Dane Lever Control F-24-R-L F-24-R-L-BE F-24-R-L-NL F-24-R-L-DT

REFERENCE NOTES: For Standard and Optional Trims/Controls , refer to page 49-50.For Standard and Optional Strikes , refer to page 46. 24 Series devices with trims furnished in SP313 Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trimAvailable until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: Sex Bolts are required and added for center case mounting when device is used with wood, composite or non-reinforced hollowmetal doors. See chart below for quanties and list prices

Application Sex Bolt 325 Sex Bolt 425 List Add EO (exit only device ) 2 4 $64Device with Trim Not Required 4 32

Device Series F-24-RDevices are priced 3', complete with standard trim and strikes.


(Price includes 299F Strike)




EXIT HARDWAR E Surface Vertical Rod Devices

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 24-V-EO ― 1245 1586 1322 1525 1586 1617 1586 1617 1711

1245 1586 1322 1525 1586 1617 1586 1617 171124-V-NL-OP ―Delta Trim

24-V-DT 717DT 1396 1770 1506 1742 1803 1834 1737 1768 1928718DT 1536 1751 1487 1758 1819 1850 1877 1908 1944718NL 1396 1770 1506 1742 1803 1834 1737 1768 1928718C 1363 1737 1473 1690 1751 1782 1704 1735 1876718TP 1496 1920 1656 1859 1920 1951 1837 1868 2045718TP-BE 1496 1920 1656 1859 1920 1951 1837 1868 2045719TL 1496 1837 1573 1792 1853 1884 1837 1868 1978719TL-BE 1496 1837 1573 1792 1853 1884 1837 1868 1978719TL-NL 1496 1837 1573 1792 1853 1884 1837 1868 1978

710DT 1387 1791 1527 1783 1844 1875 1728 1759 1969710NL 1387 1791 1527 1783 1844 1875 1728 1759 1969710TP 1387 1791 1527 1783 1844 1875 1728 1759 1969710TP-BE 1387 1791 1527 1783 1844 1875 1728 1759 1969

711K 1387 1791 1527 1783 1844 1875 1728 1759 1969711K-BE 1387 1791 1527 1783 1844 1875 1728 1759 1969711K-NL 1387 1791 1527 1783 1844 1875 1728 1759 1969711K-DT 1387 1791 1527 1783 1844 1875 1728 1759 1969

712L 1527 1884 1620 1844 1905 1936 1868 1899 2030712L-BE 1527 1884 1620 1844 1905 1936 1868 1899 2030712L-NL 1527 1884 1620 1844 1905 1936 1868 1899 2030712L-DT 1527 1884 1620 1844 1905 1936 1868 1899 2030

24-V-DT 24-V-NL 24-V-C 24-V-TP 24-V-TP-BE 24-V-TL 24-V-TL-BE 24-V-TL-NL

Control Trim 24-V-DT 24-V-NL 24-V-TP 24-V-TP-BE

Knob Control24-V-K24-V-K-BE24-V-K-NL24-V-K-DT

Dane Lever Control24-V-L24-V-L-BE24-V-L-NL24-V-L-DT

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 49-50.For Standard and Optional Strikes, refer to page 46. For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10', see page 56 for extension rod add. 24 Series devices with trims furnished in SP313.Handing: 24-V devices and noted Trims are handed and field reversible. The Device and Trims are furnished RHR when handing is not specified.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim

Sex Bolts: Optional Sex Bolts are recommended for center case and latch mounting when device is used with hollow core wood, composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Latches Device Device Application Sex Bolt 42 5 Sex Bolt 42 5 Sex Bolt 32 5 List Add EO (exit only device) 6 2 2 $80Device with Trim 6 2 Not Required 64EO (exit only device) LBR 3 2 2 56Device with Trim LB R 3 2 Not Required 40

Device Series24-VDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

(Price includes 3788 and 2130 Strikes)

Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.





FIRE EXIT HARDWAR E Surface Vertical Rod Devices

Control Trim F-24-V-EO ― 1395 1736 1472 1675 1736 1767 1736 1767 1861

1395 1736 1472 1675 1736 1767 1736 1767 1861F-24-V-NL-OP ―Delta Trim

F-24-V-DT 717DT 1546 1920 1656 1892 1953 1984 1887 1918 2078718DT 1686 1901 1637 1908 1969 2000 2027 2058 2094718NL 1546 1920 1656 1892 1953 1984 1887 1918 2078718C 1513 1887 1623 1840 1901 1932 1854 1885 2026718TP 1646 2070 1806 2009 2070 2101 1987 2018 2195718TP-BE 1646 2070 1806 2009 2070 2101 1987 2018 2195719TL 1646 1987 1723 1942 2003 2034 1987 2018 2128719TL-BE 1646 1987 1723 1942 2003 2034 1987 2018 2128719TL-NL 1646 1987 1723 1942 2003 2034 1987 2018 2128

710NL 1537 1941 1677 1933 1994 2025 1878 1909 2119710TP 1537 1941 1677 1933 1994 2025 1878 1909 2119710TP-BE 1537 1941 1677 1933 1994 2025 1878 1909 2119

710DT 1537 1941 1677 1933 1994 2025 1878 1909 2119

711K-BE 1537 1941 1677 1933 1994 2025 1878 1909 2119711K-NL 1537 1941 1677 1933 1994 2025 1878 1909 2119711K-DT 1537 1941 1677 1933 1994 2025 1878 1909 2119

711K 1537 1941 1677 1933 1994 2025 1878 1909 2119

712L-BE 1677 2034 1770 1994 2055 2086 2018 2049 2180712L-NL 1677 2034 1770 1994 2055 2086 2018 2049 2180712L-DT 1677 2034 1770 1994 2055 2086 2018 2049 2180

712L 1677 2034 1770 1994 2055 2086 2018 2049 2180

F-24-V-DT F-24-V-NL F-24-V-C F-24-V-TP F-24-V-TP-BE F-24-V-TL F-24-V-TL-BE F-24-V-TL-NL

Control Trim F-24-V-DT F-24-V-NL F-24-V-TP F-24-V-TP-BE

Knob Control F-24-V-K F-24-V-K-BE F-24-V-K-NL F-24-V-K-DT

Dane Lever Control F-24-V-L F-24-V-L-BE F-24-V-L-NL F-24-V-L-DT

REFERENCE NOTES: For Standard and Optional Trims/Controls , refer to page 49-50.For Standard and Optional Strikes , refer to page 46. For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10' see page 56 for extension rod add. 24 Series devices with trims furnished in SP313. Handing: F-24-V Devices and noted Trims are handed and field reversible. The Device and Trims are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: One 4122 Sex Bolt is supplied standard no charge for hinge side mouting. Sex Bolts are required and added to the order forcenter case and latch mounting when device is used with wood, composite or non-reinforced hollow metal doors.See chart below for quantities and list prices.

Latches Device DeviceApplication Sex Bolt 425 Sex Bolt 425 Sex Bolt 325 List AddEO (exit only device) 6 2 2 $80Device with Trim 6 2 Not Required 64EO (exit only device) LBR 3 2 2 56Device with Trim LBR 3 2 Not Required 40



(Price includes 3788 and 2130 Strikes) US28 US32D 313AN US26D US26 US32 US10 US4 US3



EXIT HARDWARE Concealed Vertical Rod Devices

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 24-C-EO ― 1308 1635 1389 1602 1667 1700 1667 1700 1798

Delta Trim 24-C-DT 717DT 1459 1819 1573 1819 1884 1917 1818 1851 2015

718DT 1599 1800 1554 1835 1900 1933 1958 1991 2031718NL 1459 1819 1573 1819 1884 1917 1818 1851 2015718C 1426 1786 1540 1767 1832 1865 1785 1818 1963718TP 1559 1969 1723 1936 2001 2034 1918 1951 2132718TP-BE 1559 1969 1723 1936 2001 2034 1918 1951 2132719TL 1559 1886 1640 1869 1934 1967 1918 1951 2065719TL-BE 1559 1886 1640 1869 1934 1967 1918 1951 2065719TL-NL 1559 1886 1640 1869 1934 1967 1918 1951 2065719TLP 1559 1886 1640 1884 1949 1982 1918 1951 2080719LTP-BE 1559 1886 1640 1884 1949 1982 1918 1951 2080719TLP-NL 1559 1886 1640 1884 1949 1982 1918 1951 2080

711K 1450 1840 1594 1860 1925 1958 1809 1842 2056711K-BE 1450 1840 1594 1860 1925 1958 1809 1842 2056711K-NL 1450 1840 1594 1860 1925 1958 1809 1842 2056711K-DT 1450 1840 1594 1860 1925 1958 1809 1842 2056

712L 1590 1933 1687 1921 1986 2019 1949 1982 2117712L-BE 1590 1933 1687 1921 1986 2019 1949 1982 2117712L-NL 1590 1933 1687 1921 1986 2019 1949 1982 2117712L-DT 1590 1933 1687 1921 1986 2019 1949 1982 2117

24-C-DT 24-C-NL 24-C-C 24-C-TP 24-C-TP-BE 24-C-TL 24-C-TL-BE 24-C-TL-NL 24-C-TLP 24-C-TLP-BE 24-C-TLP-NL

Knob Control 24-C-K 24-C-K-BE 24-C-K-NL 24-C-K-DT

Dane Lever Control 24-C-L 24-C-L-BE 24-C-L-NL 24-C-L-DT

REFERENCE NOTES: For Standard and Optional Trims/Controls , refer to page 49-50.For Standard and Optional Strikes , refer to page 46. For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10' see page 56 for extension rod add. 24 Series devices with trims furnished in SP313. Handing: All 24-C Devices and Trims are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: Optional Sex Bolts are recommended for center case when device is used with light gauge hollow metal doors.See chart below for quantities and list prices.

Application Sex Bolt 425 Sex Bolt 325 List AddEO (exit only device) 2 2 $32Device with Trim 2 Not Required 16

Device Series24-CDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

(Price includes Strikes 4188 and 2130)





FIRE EXIT HARDWAR E Concealed Vertical Rod Devices

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 F-24-C-EO ― 1458 1785 1539 1752 1817 1850 1817 1850 1948

Delta Trim F-24-C-DT 717DT 1609 1969 1723 1969 2034 2067 1968 2001 2165


711K 1600 1990 1744 2010 2075 2108 1959 1992 2206711K-BE 1600 1990 1744 2010 2075 2108 1959 1992 2206711K-NL 1600 1990 1744 2010 2075 2108 1959 1992 2206711K-DT 1600 1990 1744 2010 2075 2108 1959 1992 2206

712L 1740 2083 1837 2071 2136 2169 2099 2132 2267712L-BE 1740 2083 1837 2071 2136 2169 2099 2132 2267712L-NL 1740 2083 1837 2071 2136 2169 2099 2132 2267712L-DT 1740 2083 1837 2071 2136 2169 2099 2132 2267

F-24-C-DT F-24-C-NL F-24-C-C F-24-C-TP F-24-C-TP-BE F-24-C-TL F-24-C-TL-BE F-24-C-TL-NL F-24-C-TLP F-24-C-TLP-BE F-24-C-TLP-NL

Knob Control F-24-C- K F-24-C-K-BE F-24-C-K-NL F-24-C-K-DT

Dane Lever Control F-24-C-L F-24-C-L-BE F-24-C-L-NL F-24-C-L-DT

REFERENCE NOTES: For Standard and Optional Trims/Controls , refer to page 49-50.For Standard and Optional Strikes , refer to page 46. For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10' see page 56 for extension rod add. 24 Series devices with trims furnished in SP313. Handing: All F-24-C Devices and Trims are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: Sex Bolts are required and added to the order for center case mounting when device is used with non-reinforced hollow metal doors.See chart below for quantities and list prices.

Application Sex Bolt 425 Sex Bolt 325 List AddEO (exit only device) 2 2 $32Device with Trim 2 Not Required 16

Devices Series F-24-CDevices are priced 3', complete with standard trim and strikes.





EXIT HARDWAREWood Door Concealed Vertical Rod Devices

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US324-CWDC-EO ― 1595 1995 1695 1954 2034 2074 2034 2074 2193

Delta Trim24-CWDC-DT 717DT 1746 2179 1879 2171 2251 2291 2185 2225 2410


711K 1737 2200 1900 2212 2292 2332 2176 2216 2451711K-BE 1737 2200 1900 2212 2292 2332 2176 2216 2451711K-NL 1737 2200 1900 2212 2292 2332 2176 2216 2451711K-DT 1737 2200 1900 2212 2292 2332 2176 2216 2451

712L 1877 2293 1993 2273 2353 2393 2316 2356 2512712L-BE 1877 2293 1993 2273 2353 2393 2316 2356 2512712L-NL 1877 2293 1993 2273 2353 2393 2316 2356 2512712L-DT 1877 2293 1993 2273 2353 2393 2316 2356 2512

24-CWDC-DT24-CWDC-NL24-CWDC-C24-CWDC-TP24-CWDC-TP-BE24-CWDC-TL24-CWDC-TL-BE24-CWDC-TL-NL24-CWDC-TLP24-CWDC-TLP-BE24-CWDC-TLP-NL

Knob Control24-CWDC-K24-CWDC-K-BE24-CWDC-K-NL24-CWDC-K-DT

Dane Lever Control24-CWDC-L24-CWDC-L-BE24-CWDC-L-NL24-CWDC-L-DT

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 49-50. For Standard and Optional Strikes, refer to page 46. For door heights over 7' up to 8',extension rod is furnished at no additional charge. For door heights 8' up to 10' see page 56 for extension rod add. 24 Series devices with trims furnished in SP313.Handing: All 24-CWDC Devices and Trims are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified.The Dane lever is furnished standard. Optional lever designs, Avalon, Quantum and Sutro are available at no additional charge.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: Optional Sex Bolts are recommended for center case when device is used with hollow core or composite doors.See chart below for quantites and list prices.

Latches Device DeviceApplication Sex Bolt 325 Sex Bolt 425 Sex Bolt 325 List AddEO (exit only device) 4 2 2 $54Device with Trim 4 2 Not Required 48

Device Series24-CWDCDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.





FIRE EXIT HARDWAREWood Door Concealed Vertical Rod Devices

Control Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 F-24-CWDC-EO ― 1745 2145 1845 2104 2184 2224 2184 2224 2343

Delta Trim F-24-CWDC-DT 717DT 1896 2329 2029 2321 2401 2441 2335 2375 2560


711K 1887 2350 2050 2362 2442 2482 2326 2366 2601711K-BE 1887 2350 2050 2362 2442 2482 2326 2366 2601711K-NL 1887 2350 2050 2362 2442 2482 2326 2366 2601711K-DT 1887 2350 2050 2362 2442 2482 2326 2366 2601

712L 2027 2443 2143 2423 2503 2543 2466 2506 2662712L-BE 2027 2443 2143 2423 2503 2543 2466 2506 2662712L-NL 2027 2443 2143 2423 2503 2543 2466 2506 2662712L-DT 2027 2443 2143 2423 2503 2543 2466 2506 2662

F-24-CWDC-DT F-24-CWDC-NL F-24-CWDC-C F-24-CWDC-TP F-24-CWDC-TP-BE F-24-CWDC-TL F-24-CWDC-TL-BE F-24-CWDC-TL-NL F-24-CWDC-TLP F-24-CWDC-TLP-BE F-24-CWDC-TLP-NL

Knob Control F-24-CWDC- K F-24-CWDC-K-BE F-24-CWDC-K-NL F-24-CWDC-K-DT

Dane Lever Control F-24-CWDC-L F-24-CWDC-L-BE F-24-CWDC-L-NL F-24-CWDC-L-DT

REFERENCE NOTES: For Standard and Optional Trims/Controls , refer to page 49-50. For Standard and Optional Strikes , refer to page 46. For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights 8' up to 10', see page 56 for extension rod add.

24 Series devices with trims furnished in SP313. Handing: All F-24-CWDC Devices and Trims are handed and field reversible. The Device and Trim are furnished RHR when hand is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts: 90 minute doors for WDC fire devices assume a Steel Channel Door Construction (SCDC). Sex Bolts are required and added to the order for center case mounting when device is used with hollow core or composite doors.See chart below for quantities and list prices.

Latches Device DeviceSex Bolt 325 Sex Bolt 425 Sex Bolt 325 List Add

EO (exit only device) - SCDC - 2 2 $32Device x Trim - SCDC - 2 not required 16

Application

Device Series F-24-CWDCDevices are priced 3', complete with standard trim and strikes.



Note: prices shown are for 3' length, for 4' length add $25.00 to list price .

24 Device Options

Cylinder DoggingNot for use with Fire Exit Hardware

Prefix List Add

CD Cylinder Dogging available on all 24 series Panic Devices 57LD Less Dogging available on all 24 series Panic Devices 25

Less Bottom RodSuffix List Add

LBR Available with UL Fire Label at no additional charge on F-24-V and F-24-C devices. NCFire rated LBR devices must be ordered in pairs of Vertical Rod Devices.For Fire Rated Devices specify on device LBR and second device LBR-AFL.Second device provided with a Fire Pin.WDC Fire LBR devices are for 20 minute rating only. Consult Wood Door manufacturerfor UL Fire Ratings greater than 20 minutes.

DeadlockingPrefix List Add

DL Deadlocking Feature for Rim Devices only 74Deadlocking is supplied standard on Vertical and Concealed Vertical Devices.

Electric Dogging / Electric Latch RetractionPrefix List Add

ED Electric Dogging - Available on all 24 series Panic and Fire Devices 372Electrical Dogging cannot be used in combination with CD, EA, HWEA, EL or KOR options.

EL Electric Latch Retraction - Available on all 24 series Panic and Fire Devices 506Electrical Latch cannot be used in combination with CD, ED, EA, HWEA or KOR options.


RX Touch Bar Request to Exit Switch available on all 24 series devices 203RX dogging monitoring switch can be used in combination with a secondRX, DM or LM switch. Add $203 list.

DM Touch Bar and Latch Bolt Monitoring Switch available on most 24 device series. 203Not available on F-24-R devices, with dual DM switches or in combination with LM switch.Device monitoring switches can be used in combination with a RX switch. Add $203 list.

LM Latch Bolt Monitoring Switch available on most 24 device series. 203Not available on F-24-R devices, with dual LM switches or in combination with DM switch.LM device monitoring switch can be used in combination with a RX switch. Add $203 list.



EA Exit Alarm For Surface Vertical Devices, specify device with DM (Device Monitor Switch). 372Add $203 list. 9 Volt battery included. Not available with KOR.

HWEA Hard-Wired Exit Alarm available on 24-R and 24-V Panic and Fire Devices. 761For Surface Vertical Devices, specify device with DM (Device Monitor Switch). Add $203 list.9 Volt battery included. Not available with KOR.PS902 Power Supply required and must be used for warranty to apply. See page 20 for pricing.

HWK Hard-Wired Adapter for field installation to eliminate 9 volt battery. 389Order part number 650305.





Electrical Accessories 24Delayed Exit SystemDesigned to meet NFPA 101 “Special Locking Arrangement” applicationsA complete delayed egress system requires several components not included with controller. Consult catalog for details.

Power SuppliesStandard Features• UL294 Listed for Access Control• Class 2 rated power limited output• Universal 110-220 VAC Input• Regulated and filtered DC outputs• AC input and DC output LED indicators

1. Select Power Supply

Model No. Description List Price

PS902 Base Power Supply (2A @ 12/24 VDC field selectable) Approximate weight 9 lbs. 210PS902 is able to accept a total of 1 optional distribution board and 1 900-FA board.

PS914 Base Power Supply (4A (High inrush) @ 12/24 VDC field acceptable.) Approximate weight 9 lbs. 593PS914 is able to accept a total of 2 optional distribution boards.

BAA "Buy America Act" compliant power supply option 32will be labeled as "Assembled in the U.S.A. with U.S. and foreign materials"

When specifying PS914 power supply for use with "EL" Electric Latch Retraction devices, the 2RS is furnishedwhen board option not specified.


DE5101 Logic Controller *15 Second Delay furnished standard 784*Over 15 second delay requires a letter of approval from authority having local jurisdiction. Fax Letter in with Sales Order.Order cannot be processed without the letter.

Electric Power TransfersModel No. Description SP28 SP313 Wt.lbs./oz.

EPT 2 Two 18 gauge wires 441 441 2.5EPT 10 Ten 24 gauge wires 467 467 2.5

• Polarized Connectors for optional distribution boards• AC input status indication on outside cover• AC status monitor• 12˝ H x 14˝ W x 4˝ D enclosure

2. Select Optional Distribution Board with or without FA (Fire Alarm Relay)

Model No. Description Part # List Price

900-4R 4 Independently controlled relays 44489912-00 140900-4R-FA 4 Independently controlled relays with FA 190900-2RS 2 Relay board output (PS914 only) for controlling EL Exit Device 44489896-00 145900-2RS-FA 2 Relay board output with FA (PS914 only) for controlling EL Exit Device 195900-4RL 4 Relay board integrated logic for controlling security interlocks, 44489920-00 384

auto operators and time delays. Campatible with EL Exit Devices.900-4RL-FA 4 Relay board integrated logic for controlling security interlocks, 44489920-00 434

auto operators and time delays with FA. Campatible with EL Exit Devices.900-8F 8 fuse protected outputs 44489946-00 50900-8F-FA 8 fuse protected outputs with FA 100900-8P 8 PTC protected outputs 44489938-00 50900-8P-FA 8 PTC protected outputs with FA 100900-BBK Battery Backup Kit (includes two 7A/hr batteries) 44489961-00 200900-BB Battery Backup Board Only 44489953-00 100900-BAT Batteries Only (qty 2) 44487155-00 100

3. Select Other Power Supply Options


900-FA Fire Alarm Relay (EIR) module is a plug-in relay to provide an 44487247-00 50interface with fire or emergency override systems.PS902: May be installed directly on power supply or may be used with optional distribution boards.PS914: Must be used with optional distribution boards.

900-KL Key Lock Cover 32



EXIT HARDWARERim Devices(Price includes 299 Strike) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3

25-R-EO ― 813 1016 863 996 1036 1057 1036 1057 1166

813 1016 863 996 1036 1057 1036 1057 116625-R-NL-OP ―Lever - Dane

25-R-L 510L 1111 1365 1161 1345 1392 1413 1334 1355 1522510L-BE 1111 1365 1161 1345 1392 1413 1334 1355 1522510L-NL 1052 1296 1102 1276 1321 1342 1275 1296 1451510L-DT 1052 1296 1102 1276 1321 1342 1275 1296 1451

511L 1162 1416 1212 1396 1444 1465 1385 1406 1574

512TP 1080 1309 1130 1289 1380 1401 1303 1324 1510512TP-BE 1080 1309 1130 1289 1380 1401 1303 1324 1510512-NL 1027 1251 1077 1231 1312 1333 1250 1271 1442

513K 1037 1279 1087 1259 1342 1363 1260 1281 1472513K-BE 1037 1279 1087 1259 1342 1363 1260 1281 1472513K-NL 1037 1279 1087 1259 1342 1363 1260 1281 1472513K-DT 1037 1279 1087 1259 1342 1363 1260 1281 1472

717DT 964 1200 1047 1213 1253 1274 1187 1208 1383512DT 993 1198 1043 1178 1312 1333 1216 1237 1442

25-R-L-BE25-R-L-NL25-R-L-DT

VR Lever25-R-L

Thumbpiece25-R-TP25-R-TP-BE25-R-NL

Knob25-R-K25-R-K-BE25-R-K-NL25-R-K-DT

DT Pull25-R-DT25-R-DT

REFERENCE NOTES:For Standard and Optional Strikes, refer to page 46.

25 Series devices with trims furnished in SP313.Handing: 25-R Device is non-handed. Lever trims and 717DT are handed but field reversible. Trims are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim

Sex Bolts: Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood, composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 425 List Add

EO (exit only device) 8 $64Device x Trim 4 32

Device Series25-R

Devices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

Trim





FIRE EXIT HARDWARE Rim Devices (Price includes 299F Strike for single door applications only. For double door applications, specify 499F Strike and add $75 to list prices below)

Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 F-25-R-EO ― 976 1179 1026 1159 1199 1220 1199 1220 1329

976 1179 1026 1159 1199 1220 1199 1220 1329F-25-R-NL-OP ―Lever - Dane

F-25-R-L 510L 1274 1528 1324 1508 1555 1576 1497 1518 1685510L-BE 1274 1528 1324 1508 1555 1576 1497 1518 1685510L-NL 1215 1459 1265 1439 1484 1505 1438 1459 1614510L-DT 1215 1459 1265 1439 1484 1505 1438 1459 1614

511L 1325 1579 1375 1559 1607 1628 1548 1569 1737

512TP 1243 1472 1293 1452 1543 1564 1466 1487 1673512TP-BE 1243 1472 1293 1452 1543 1564 1466 1487 1673512-NL 1240 1414 1240 1394 1475 1496 1413 1434 1605

513K 1200 1442 1250 1422 1505 1526 1423 1444 1635513K-BE 1200 1442 1250 1422 1505 1526 1423 1444 1635513K-NL 1200 1442 1250 1422 1505 1526 1423 1444 1635513K-DT 1200 1442 1250 1422 1505 1526 1423 1444 1635

717DT 1127 1363 1210 1376 1416 1437 1350 1371 1546512DT 1156 1361 1206 1341 1475 1496 1379 1400 1605

F-25-R-L-BE F-25-R-L-NL F-25-R-L-DT

VR Lever F-25-R-L

Thumbpiece F-25-R-TP F-25-R-TP-BE F-25-R-NL

Knob F-25-R-K F-25-R-K-BE F-25-R-K-NL F-25-R-K-DT

DT Pull F-25-R-DT F-25-R-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.25 Series devices with trims furnished in SP313.

Handing: F-25-R Device is non-handed. Lever trims and 717DT are handed but field reversible. Trims are furnished RHR when handing is not specified.

The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim

Sex Bolts: Sex Bolts are required and added to the order for center case mounting when device is used with wood, composite or non-reinforced hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 425 List Add EO (exit only device) 8 $64Device x Trim 4 32

Device Series F-25-RDevices are priced 3', complete with standard trim and strikes.


Trim



EXIT HARDWARESurface Vertical Rod Devices(Price includes 3788 & 2130 Strikes ) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3

25-V-EO ― 1151 1447 1223 1410 1468 1496 1468 1496 1583

1151 1447 1223 1410 1468 1496 1468 1496 158325-V-NL-OP ―Lever - Dane

25-V-L 510L 1449 1796 1521 1759 1824 1852 1766 1794 1939510L-BE 1449 1796 1521 1759 1824 1852 1766 1794 1939510L-NL 1390 1727 1462 1690 1753 1781 1707 1735 1868510L-DT 1390 1727 1462 1690 1753 1781 1707 1735 1868

511L 1500 1847 1572 1810 1876 1904 1817 1845 1991

512TP 1418 1740 1490 1703 1812 1840 1735 1763 1927512TP-BE 1418 1740 1490 1703 1812 1840 1735 1763 1927512-NL 1365 1682 1437 1645 1744 1772 1682 1710 1859

513K 1375 1710 1447 1673 1774 1802 1692 1720 1889513K-BE 1375 1710 1447 1673 1774 1802 1692 1720 1889513K-NL 1375 1710 1447 1673 1774 1802 1692 1720 1889513K-DT 1375 1710 1447 1673 1774 1802 1692 1720 1889

717DT 1302 1631 1407 1627 1685 1713 1619 1647 1800512DT 1331 1629 1403 1592 1744 1772 1648 1676 1859

25-V-L-BE25-V-L-NL25-V-L-DT

VR Lever25-V-L

Thumbpiece25-V-TP25-V-TP-BE25-V-NL

Knob25-V-K25-V-K-BE25-V-K-NL25-V-K-DT

DT Pull25-V-DT25-V-DT

REFERENCE NOTES:For Standard and Optional Strikes, refer to page 46.For door heights over 7' to 8', extension rod is furnished at no extra charge. For door heights over 8' to 10', see page 56 for extension rod add.

25 Series devices with trims furnished in SP313.Handing: 25-V Device is handed but field reversible. Lever trims and 717DT are handed but field reversible. The device and trims are furnished RHR when handing is not specified.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim

Sex Bolts: Optional Sex Bolts are recommended for center case and latch mounting when device is used with hollow core wood, composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Latches DeviceApplication Sex Bolt 425 Sex Bolt 425 List AddEO (exit only device) 6 6 $96Device x Trim 6 2 64EO (exit only device) LBR 3 6 72Device x Trim LBR 3 2 40

Device Series25-VDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.





FIRE EXIT HARDWAR E Surface Vertical Rod Devices (Price includes 3788 & 2130 Strikes ) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3

F-25-V-EO ― 1349 1645 1421 1608 1666 1694 1666 1694 1781

1349 1645 1421 1608 1666 1694 1666 1694 1781F-25-V-NL-OP ―Lever - Dane

F-25-V-L 510L 1647 1994 1719 1957 2022 2050 1964 1992 2137510L-BE 1647 1994 1719 1957 2022 2050 1964 1992 2137510L-NL 1588 1925 1660 1888 1951 1979 1905 1933 2066510L-DT 1588 1925 1660 1888 1951 1979 1905 1933 2066

511L 1698 2045 1770 2008 2074 2102 2015 2043 2189

512TP 1616 1938 1688 1901 2010 2038 1933 1961 2125512TP-BE 1616 1938 1688 1901 2010 2038 1933 1961 2125512-NL 1563 1880 1635 1843 1942 1970 1880 1908 2057

513K 1573 1908 1645 1871 1972 2000 1890 1918 2087513K-BE 1573 1908 1645 1871 1972 2000 1890 1918 2087513K-NL 1573 1908 1645 1871 1972 2000 1890 1918 2087513K-DT 1573 1908 1645 1871 1972 2000 1890 1918 2087

717DT 1500 1829 1605 1825 1883 1911 1817 1845 1998512DT 1529 1827 1601 1790 1942 1970 1846 1874 2057

F-25-V-L-BE F-25-V-L-NL F-25-V-L-DT

VR Lever F-25-V-L

Thumbpiece F-25-V-TP F-25-V-TP-BE F-25-V-NL

Knob F-25-V-K F-25-V-K-BE F-25-V-K-NL F-25-V-K-DT

DT Pull F-25-V-DT F-25-V-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.For door heights over 7' up to 8', extension rod is furnished at no extra charge. For door heights over 8' up to 10', see page 56 for extension rod add.25 Series devices with trims furnished in SP313. Handing: F-25-V Devices, Lever trims and 717DT trim are handed and field reversible. The Device and Trims are furnished RHR when handing is not specified.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim

Sex Bolts:Sex Bolts are required and added to the order for center case mounting and latch mounting when device is used with wood, compositeor non-reinforced hollow metal doors. See chart below for quantities and list prices.

Latches DeviceApplication Sex Bolt 425 Sex Bolt 425 List AddEO (exit only device) 6 6 $96Device x Trim 6 2 64EO (exit only device) LBR 3 6 72

40Device x Trim LBR 3 2





EXIT HARDWAR E Mortise Lock Devices (Price includes 1279 Strike) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3

25-M-EO ― 1055 1318 1121 1292 1345 1371 1346 1372 1450

1055 1318 1121 1292 1345 1371 1346 1372 145025-M-NL-OP ―Lever - Dane

25-M-L 510L 1353 1667 1419 1641 1701 1727 1644 1670 1806510L-BE 1353 1667 1419 1641 1701 1727 1644 1670 1806510L-NL 1294 1598 1360 1572 1630 1656 1585 1611 1735510L-DT 1294 1598 1360 1572 1630 1656 1585 1611 1735

512TP 1322 1611 1388 1585 1689 1715 1613 1639 1794512TP-BE 1322 1611 1388 1585 1689 1715 1613 1639 1794512-NL 1269 1553 1335 1527 1621 1647 1560 1586 1726

513K 1279 1581 1345 1555 1651 1677 1570 1596 1756513K-BE 1279 1581 1345 1555 1651 1677 1570 1596 1756513K-NL 1279 1581 1345 1555 1651 1677 1570 1596 1756513K-DT 1279 1581 1345 1555 1651 1677 1570 1596 1756

717DT 1206 1502 1305 1509 1562 1588 1497 1523 1667512DT 1235 1500 1301 1474 1621 1647 1526 1552 1726

511L 1404 1718 1470 1692 1753 1779 1695 1721 1858

25-M-L-BE 25-M-L-NL 25-M-L-DT

VR Lever 25-M-L

Thumbpiece 25-M-TP 25-M-TP-BE 25-M-NL

Knob 25-M-K 25-M-K-BE 25-M-K-NL 25-M-K-DT

DT Pull 25-M-DT 25-M-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.25 Series devices with trims furnished in SP313. Handing: The 25-M Device is handed but not field reversible. Specify handing RHR or LHR. Lever Trim and 717DT are handed and field reversible.The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge Supplied as NL less trim

Sex Bolts: Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 425 List Add EO (exit only device ) 6 Device x Trim 2 16

Device Series25-MDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

$48





FIRE EXIT HARDWARE Mortise Lock Devices (Price includes 1279 Strike) Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3

F-25-M-EO ― 1205 1468 1271 1442 1495 1521 1496 1522 1600

1205 1468 1271 1442 1495 1521 1496 1522 1600F-25-M-NL-OP ―Lever - Dane

F-25-M-L 510L 1503 1817 1569 1791 1851 1877 1794 1820 1956510L-BE 1503 1817 1569 1791 1851 1877 1794 1820 1956510L-NL 1444 1748 1510 1722 1780 1806 1735 1761 1885510L-DT 1444 1748 1510 1722 1780 1806 1735 1761 1885

511L 1554 1868 1620 1842 1903 1929 1845 1871 2008

512TP 1472 1761 1538 1735 1839 1865 1763 1789 1944512TP-BE 1472 1761 1538 1735 1839 1865 1763 1789 1944512-NL 1419 1703 1485 1677 1771 1797 1710 1736 1876

513K 1429 1731 1495 1705 1801 1827 1720 1746 1906513K-BE 1429 1731 1495 1705 1801 1827 1720 1746 1906513K-NL 1429 1731 1495 1705 1801 1827 1720 1746 1906513K-DT 1429 1731 1495 1705 1801 1827 1720 1746 1906

717DT 1356 1652 1455 1659 1712 1738 1647 1673 1817512DT 1385 1650 1451 1624 1771 1797 1676 1702 1876

F-25-M-L-BE F-25-M-L-NL F-25-M-L-DT

VR Lever F-25-M-L

Thumbpiece F-25-M-TP F-25-M-TP-BE F-25-M-NL

Knob F-25-M-K F-25-M-K-BE F-25-M-K-NL F-25-M-K-DT

DT Pull F-25-M-DT F-25-M-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.

25 Series devices with trims furnished in SP313. Handing: The F-25-M device is handed but not field reversible. Specify hand RHR and LHR. Lever Trim and 717DT are handed and field reversible. The Dane lever is furnished standard. Optional lever desi gns Avalon, Quantum and Sutro are available at no additional charge. Supplied as NL less trim

S ex B o lt s: Optional Sex Bolts are required for center case mountin g when device is used with hollow core wood, composite or li g ht g au g e hollow metal doors. See chart below for quantities and list prices.

Applicatio n Sex Bolt 425 List Add EO ( exit onl y device ) 6 $48Device x Trim 2 16

Device Series F-25-MDevices are priced 3', complete with standard trim and strikes.




EXIT HARDWARE Concealed Vertical Rod Devices

Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 25-C-EO ― 1180 1505 1254 1447 1505 1535 1505 1535 1623

Lever - Dane 25-C-L 510L 1478 1854 1552 1796 1861 1891 1803 1833 1979

510L-BE 1478 1854 1552 1796 1861 1891 1803 1833 1979510L-NL 1419 1785 1493 1727 1790 1820 1744 1774 1908510L-DT 1419 1785 1493 1727 1790 1820 1744 1774 1908

512TP 1447 1798 1521 1740 1849 1879 1772 1802 1967512TP-BE 1447 1798 1521 1849 1849 1879 1772 1802 1967512-NL 1394 1740 1468 1682 1781 1811 1719 1749 1899

513K 1404 1768 1478 1710 1811 1841 1729 1759 1929513K-BE 1404 1768 1478 1710 1811 1841 1729 1759 1929513K-NL 1404 1768 1478 1710 1811 1841 1729 1759 1929513K-DT 1404 1768 1478 1710 1811 1841 1729 1759 1929

717DT 1331 1689 1438 1664 1722 1752 1656 1686 1840512DT 1360 1687 1434 1629 1781 1811 1685 1715 1899

718C 1298 1656 1405 1612 1670 1700 1623 1653 1788

511L 1529 1905 1603 1847 1913 1943 1854 1884 2031

25-C-L-BE 25-C-L-NL 25-C-L-DT

VR Lever 25-C-L

Thumbpiece 25-C-TP 25-C-TP-BE 25-C-NL

Knob 25-C-K 25-C-K-BE 25-C-K-NL 25-C-K-DT

DT Pull 25-C-DT 25-C-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.For door heights over 7' to 8', extension rod is furnished at no additional charge, For door heights 8' up to 10', see page 56 for extension rod add. 25 Series devices with trims furnished in SP313. Handing: 25-C Device, Lever Trim and 717DT are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.g

Sex Bolts: Optional Sex Bolts are recommended for center case mounting when device is used with light gauge hollow metal doors. See chart below for quantities and list prices.

Applicatio n Sex Bolt 425 List Add EO ( exit onl y device ) 6 $48Device x Trim 2 16

(Price includes 4188 and 2130 Strikes )

Device Series25-CDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.

25-C-C

Delta Trim





F-25-C-C

FIRE EXIT HARDWAR E Concealed Vertical Rod Devices

Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 F-25-C-EO ― 1330 1655 1404 1597 1655 1685 1655 1685 1773

Lever - Dane F-25-C-L 510L 1628 2004 1702 1946 2011 2041 1953 1983 2129

510L-BE 1628 2004 1702 1946 2011 2041 1953 1983 2129510L-NL 1569 1935 1643 1877 1940 1970 1894 1924 2058510L-DT 1569 1935 1643 1877 1940 1970 1894 1924 2058

511L 1679 2055 1753 1997 2063 2093 2004 2034 2181

512TP 1597 1948 1671 1890 1999 2029 1922 1952 2117512TP-BE 1597 1948 1671 1890 1999 2029 1922 1952 2117512-NL 1544 1890 1618 1832 1931 1961 1869 1899 2049

513K 1554 1918 1628 1860 1961 1991 1879 1909 2079513K-BE 1554 1918 1628 1860 1961 1991 1879 1909 2079513K-NL 1554 1918 1628 1860 1961 1991 1879 1909 2079513K-DT 1554 1918 1628 1860 1961 1991 1879 1909 2079

717DT 1481 1839 1588 1814 1872 1902 1806 1836 1990512DT 1510 1837 1584 1779 1931 1961 1835 1865 2049

718C 1448 1806 1555 1762 1820 1850 1773 1803 1938

F-25-C-L-BE F-25-C-L-NL F-25-C-L-DT

VR Lever F-25-C-L

Thumbpiece F-25-C-TP F-25-C-TP-BE F-25-C-NL

Knob F-25-C-K F-25-C-K-BE F-25-C-K-NL F-25-C-K-DT

DT Pull F-25-C-DT F-25-C-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10', see page 56 for extension rod add. 25 Series devices with trims furnished in SP313. Handing: F-25-C Device, Lever Trim and 717DT are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.

Sex Bolts: Optional Sex Bolts are required for center case mounting when device is used with non-reinforced hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 425 List Add EO (exit only device ) 6 $48 Device x Trim 2 16

Device Series F-25-CDevices are priced 3', complete with standard trim and strikes.



Delta Trim



EXIT HARDWAR E Wood Door Concealed Vertical Rod

Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 25-CWDC-EO ― 1338 1673 1423 1640 1707 1740 1707 1740 1841

Lever - Dane 25-CWDC-L 510L 1636 2022 1721 1989 2063 2096 2005 2038 2197

510L-BE 1636 2022 1721 1989 2063 2096 2005 2038 2197

511L 1687 2073 1772 2040 2115 2148 2056 2089 2249

512TP 1605 1966 1690 1933 2051 2084 1974 2007 2185512TP-BE 1605 1966 1690 1933 2051 2084 1974 2007 2185512-NL 1552 1908 1637 1875 1983 2016 1921 1954 2117

513K 1562 1936 1647 1903 2013 2046 1931 1964 2147513K-BE 1562 1936 1647 1903 2013 2046 1931 1964 2147513K-NL 1562 1936 1647 1903 2013 2046 1931 1964 2147513K-DT 1562 1936 1647 1903 2013 2046 1931 1964 2147

717DT 1489 1857 1607 1857 1924 1957 1858 1891 2058512DT 1518 1855 1603 1822 1983 2016 1887 1920 2117

510L-NL 1577 1953 1662 1920 1992 2025 1946 1979 2126510L-DT 1577 1953 1662 1920 1992 2025 1946 1979 2126

25-CWDC-L-BE 25-CWDC-L-NL 25-CWDC-L-DT

VR Lever 25-CWDC-L

Thumbpiece 25-CWDC-TP 25-CWDC-TP-BE 25-CWDC-NL

Knob 25-CWDC-K 25-CWDC-K-BE 25-CWDC-K-NL 25-CWDC-K-DT

DT Pull 25-CWDC-DT 25-CWDC-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10', see page 56 for extension rod add. 25 Series devices with trims furnished in SP313. Handing: 25-CWDC Device, Lever Trim and 717DT are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge..

Sex Bolts: Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood or composite doors. See chart below for quantities and list prices.

Latches Device Sex Bolt 32 5 S ex Bolt 42 List Add

EO (exit only device) 4 6 $80Device x Trim 4 2 48

Device Series25-CWDCDevices are priced 3', complete with standard trim and strikes.Cylinders are not included in price unless noted.


Application





FIRE EXIT HARDWAR E Wood Door Concealed Vertical Rod

Trim US28 US32D 313AN US26D US26 US32 US10 US4 US3 F-25-CWDC-EO ― 1488 1823 1573 1790 1857 1890 1857 1890 1991

Lever - Dane F-25-CWDC-L 510L 1786 2172 1871 2139 2213 2246 2155 2188 2347

510L-BE 1786 2172 1871 2139 2213 2246 2155 2188 2347510L-NL 1727 2103 1812 2070 2142 2175 2096 2129 2276510L-DT 1727 2103 1812 2070 2142 2175 2096 2129 2276

513K 1712 2086 1797 2053 2163 2196 2081 2114 2297513K-BE 1712 2086 1797 2053 2163 2196 2081 2114 2297513K-NL 1712 2086 1797 2053 2163 2196 2081 2114 2297513K-DT 1712 2086 1797 2053 2163 2196 2081 2114 2297

512TP 1755 2116 1840 2083 2201 2234 2124 2157 2335512TP-BE 1755 2116 1840 2083 2201 2234 2124 2157 2335512-NL 1702 2058 1787 2025 2133 2166 2071 2104 2267

717DT 1639 2007 1757 2007 2074 2107 2008 2041 2208512DT 1668 2005 1753 1972 2133 2166 2037 2070 2267

511L 1837 2223 1922 2190 2265 2298 2206 2239 2399

F-25-CWDC-L-BE F-25-CWDC-L-NL F-25-CWDC-L-DT

VR Lever F-25-CWDC-L

Thumbpiece F-25-CWDC-TP F-25-CWDC-TP-BE F-25-CWDC-NL

Knob F-25-CWDC-K F-25-CWDC-K-BE F-25-CWDC-K-NL F-25-CWDC-K-DT

DT Pull F-25-CWDC-DT F-25-CWDC-DT

REFERENCE NOTES: For Standard and Optional Strikes , refer to page 46.For door heights over 7' up to 8', extension rod is furnished at no additional charge. For door heights over 8' up to 10', see page 56 for extension rod add. 25 Series devices with trims furnished in SP313. Handing: F-25-CWDC Devices, Lever Trim and 717DT are handed and field reversible. The Device and Trim are furnished RHR when handing is not specified. The Dane lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.

Sex Bolts: 90 minute doors for WDC fire devices assume a Steel Channel Door Construction (SCDC).Sex Bolts are required and added to the order for center case mounting when device is used with hollow core or composite doors.See chart below for quantities and list prices.

Latches Device Sex Bolt 325 Sex Bolt 425 List Add

- 6 $48- 2 16

Application

Device Series F-25-CWDCDevices are priced 3', complete with standard trim and strikes.



EO (Exit only device) - SCDC Device x Trim - SCDC



25 Device Options

Cylinder DoggingNot for use with Fire Exit Hardware

Prefix List Add

CD Cylinder Dogging available on all 25 series Panic Devices 57LD Less Dogging available on all 25 series Panic Devices 25

Less Bottom RodSuffix List Add

LBR Available with UL Fire Label at no additional charge on F-25-V and F-25-C devices. NCFire rated LBR devices must be ordered in pairs of Vertical Rod Devices.For Fire Rated Devices specify on device LBR and second device LBR-AFL.Second device provided with a Fire Pin.WDC Fire LBR devices are for 20 minute rating only. Consult Wood Door manufacturerfor UL Fire Ratings greater than 20 minutes.

Hurricane DeviceMeets all FBC Hurricane Listings. Consult factory for specific Applications.

Prefix List Add

HH Hurricane option available on 25-R, F-25-R, 25-V, F-25-V. Prefix device “HH”. 26Note: HH25-V and HH-F-25-V, will be supplied with twelve sexbolts. Add $96.00 list.

Standard Devices 25-C, F-25-C, 25-M, F-25-M meet all FBC Hurricane NClisting requirements. Consult factory for specific applications.Prefix “HH” is not required on these devices.

Electric Dogging / Electric Latch RetractionPrefix List Add

ED Electric Dogging - Available on all 25 series Panic and Fire Devices 372Electrical Dogging cannot be used in combination with CD, EA, HWEA, EL or KOR options.

EL Electric Latch Retraction - Available on all 25 series Panic and Fire Devices 506Electrical Latch cannot be used in combination with CD, ED, EA, HWEA or KOR options.


RX Touch Bar Request to Exit Switch available on all 25 series Devices. 203RX dogging monitoring switch can be used in combination with a secondRX, DM or LM switch. Add $203 list.

DM Touch Bar and Latch Bolt Monitoring Switch available on most 25 series Devices. 203DM device monitoring switch can be used in combination with a RX switch. Add $203 list.

LM Latch Bolt Monitoring Switch available on most 25 series Devices. 203Not available on F-25-R devices, with dual LM switches or in combination with DM switch.LM device monitoring switch can be used in combination with a RX switch. Add $203 list.






EA Exit Alarm 372For Surface Vertical Devices, specify device with DM (Device Monitor Switch). Add $203 list.9 Volt battery included. Not available with KOR.

HWEA Hard-Wired Exit Alarm available on 25-R and 25-V Panic and Fire Devices. 761For Surface Vertical Devices, specify device with DM (Device Monitor Switch) Add $203 list.9 Volt battery included. Not available with KOR.PS902 Power Supply required and must be used for warranty to apply. See page 33 for pricing.

HWK Hard-Wired Adapter for field installation to eliminate 9 volt battery. 389Order part number 650305.

(continued) Device Options 25

Electric Lock or Unlock of TrimsPrefix List Add

FSA Electric Lock/Unlock Trim, Fail Safe (unlocks when power is interrupted). 288FSE Electric Lock/Unlock Trim, Fail Secure (locks when power is interrupted). 288

Available on all 25 series devices.Available with TP, K, or L functions only.Can be used in combination with EL, ED, EA, HWEA or any Device Monitoring Switch.



25 Electrical Accessories

Delayed Exit SystemDesigned to meet NFPA 101 “Special Locking Arrangement” applicationsA complete delayed egress system requires several components not included with controller. Consult catalog for details.

Power SuppliesStandard Features• UL294 Listed for Access Control• Class 2 rated power limited output• Universal 110-220 VAC Input• Regulated and filtered DC outputs• AC input and DC output LED indicators

1. Select Power Supply


PS902 Base Power Supply (2A @ 12/24 VDC field selectable) Approximate weight 9 lbs. 210PS902 is able to accept a total of 1 optional distribution board and 1 900-FA board.

PS914 Base Power Supply (4A (High inrush) @ 12/24 VDC field acceptable.) Approximate weight 9 lbs. 593PS914 is able to accept a total of 2 optional distribution boards.

BAA "Buy America Act" compliant power supply option 32will be labeled as "Assembled in the U.S.A. with U.S. and foreign materials"

When specifying PS914 power supply for use with "EL" Electric Latch Retraction devices, the 2RS is furnishedwhen board option not specified.


DE5101 Logic Controller *15 Second Delay furnished standard 784*Over 15 second delay requires a letter of approval from authority having local jurisdiction. Fax Letter in with Sales Order.Order cannot be processed without the letter.

Electric Power TransfersModel No. Description SP28 SP313 Wt.lbs./oz.

EPT 2 Two 18 gauge wires 441 441 2.5EPT 10 Ten 24 gauge wires 467 467 2.5

• Polarized Connector for optional distribution boards• AC input status indication on outside cover• AC status monitor• 12˝ H x 14˝ W x 4˝ D enclosure

2. Select Optional Distribution Board with or without FA (Fire Alarm Relay)


900-4R 4 Independently controlled relays 44489912-00 140900-4R-FA 4 Independently controlled relays with FA 190900-2RS 2 Relay board output (PS914 only) for controlling EL Exit Device 44489896-00 145900-2RS-FA 2 Relay board output with FA (PS914 only) for controlling EL Exit Device 195900-4RL 4 Relay board integrated logic for controlling security interlocks, 44489920-00 384

auto operators and time delays. Campatible with EL Exit Devices.900-4RL-FA 4 Relay board integrated logic for controlling security interlocks, 44489920-00 434

auto operators and time delays with FA. Campatible with EL Exit Devices.900-8F 8 fuse protected outputs 44489946-00 50900-8F-FA 8 fuse protected outputs with FA 100900-8P 8 PTC protected outputs 44489938-00 50900-8P-FA 8 PTC protected outputs with FA 100900-BBK Battery Backup Kit (includes two 7A/hr batteries) 44489961-00 200900-BB Battery Backup Board Only 44489953-00 100900-BAT Batteries Only (qty 2) 44487155-00 100

3. Select Other Power Supply Options


900-FA Fire Alarm Relay (EIR) module is a plug-in relay to provide an 44487247-00 50interface with fire or emergency override systems.PS902: May be installed directly on power supply or may be used with optional distribution boards.PS914: Must be used with optional distribution boards.

900-KL Key Lock Cover 32



Notes

XX-R Series DevicesDevices are furnished standard for door widths up to 4' and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

Exit Hardware US3Rim Devices US4 SP313 US26(Price includes F570 Strike) Trim US10 US32D US26D US32

XX-R-EO – 798 961 1048 1086Athena

XX-R-DT 815DT 902 1152 1239 1277XX-R-NL 815NL 911 1167 1254 1292XX-R-C 815C 833 1013 1100 1138XX-R-TP 815TP 933 1190 1277 1315XX-R-TP-BE 815TP-BE 933 1190 1277 1315XX-R-TP-NL 815TP 933 1190 1277 1315

KnobXX-R-K 811K 975 1170 1290 1328XX-R-K-BE 811K-BE 975 1170 1290 1328XX-R-K-NL 811K 975 1170 1290 1328XX-R-K-DT 811K-DT 975 1170 1290 1328

Dane LeverXX-R-L 812L 1082 1294 1387 1425XX-R-L-BE 812L-BE 1082 1294 1387 1425XX-R-L-NL 812L 1082 1294 1387 1425XX-R-L-DT 812L-DT 1082 1294 1387 1425

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.Handing: The XX-R Device and Lever Trims are handed and field reversible. Device and Trim are furnished RHR when handing is not specified.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The EO Device is compatible with all device functions except all L, K and KIL. When ordering device only for L, K and KIL functionsspecify device with function “less trim”. Example: XX-R-L less trim.NL function is in device, trim does not change.

Sex Bolts:Optional Sex Bolts are recommended for center case and end case mounting when device is used with hollow core wood,composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Application Sex Bolt 2729 List AddEO (exit only device) 8 $52Device x Athena Trim 8 52Device x all other Trims 4 26

◆

●

●

●

●

▲●

▲●

★▲●

▲●

★

★

★

◆

●

▲





Device Series F-XX-RDevices are furnished standard for door widths up to 4'

and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

FIRE EXIT HARDWARE US3Rim Devices US4 SP313 US26(Price includes F570 Strike) Control Trim US10 US32D US26D US32

F-XX-R-EO – 1085 1208 1288 1322Athena

F-XX-R-DT 815DT 1189 1399 1479 1513F-XX-R-NL 815NL 1198 1414 1494 1528F-XX-R-C 815C 1120 1260 1340 1374F-XX-R-TP 815TP 1220 1437 1517 1517F-XX-R-TP-BE 815TP-BE 1220 1437 1517 1551F-XX-R-TP-NL 815TP 1220 1437 1517 1551

KnobF-XX-R-K 811K 1262 1417 1530 1564F-XX-R-K-BE 811K-BE 1262 1417 1530 1564F-XX-R-K-NL 811K 1262 1417 1530 1564F-XX-R-K-DT 811K-DT 1262 1417 1530 1564

Dane LeverF-XX-R-L 812L 1369 1541 1627 1661F-XX-R-L-BE 812L-BE 1369 1541 1627 1661F-XX-R-L-NL 812L 1369 1541 1627 1627F-XX-R-L-DT 812L-DT 1369 1541 1627 1661

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.Handing: The F-XX-R Device and Lever Trims are handed and field reversible. Device and Trim are furnished RHR when handing is not specified.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The EO Device is compatible with all device functions except all L, K and KIL. When ordering device only for L, K and KIL functionsspecify device with function “less trim”. Example: F-XX-R-L less trim. NL function is in device, trim does not change.

Sex Bolts:Sex Bolts are required and added to the order for center case and end case mounting when device is used with wood,composite or non-reinforced hollow metal doors. See chart below for quantities and list prices.


★

★

★

◆

●

●

●

●

▲●

▲●

★▲●

▲●

◆

●

▲



XX-V Device Series Devices are furnished standard for door widths up to 4' and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

EXIT HARDWARE US3Surface Vertical Rod Devices US4 SP313 US26(Price includes 3788 and 2130 Strikes ) Trim US10 US32D US26D US32

XX-V-EO – 1129 1345 1345 1571Athena

XX-V-DT 815DT 1233 1536 1536 1762XX-V-NL 815NL 1242 1551 1551 1777XX-V-C 815C 1164 1397 1397 1623XX-V-TP 815TP 1264 1574 1574 1800XX-V-TP-BE 815TP-BE 1264 1574 1574 1800XX-V-TP-NL 815TP 1264 1574 1574 1800

KnobXX-V-K 811K 1306 1554 1587 1813XX-V-K-BE 811K-BE 1306 1554 1587 1813XX-V-K-NL 811K 1306 1554 1587 1813XX-V-K-DT 811K-DT 1306 1554 1587 1813

Dane LeverXX-V-L 812L 1413 1678 1684 1910XX-V-L-BE 812L-BE 1413 1678 1684 1910XX-V-L-NL 812L 1413 1678 1684 1910XX-V-L-DT 812L-DT 1413 1678 1684 1910

Delta Thumb LeverXX-V-TL 719TL 1380 1596 1612 1838XX-V-TL-BE 719TL-BE 1380 1596 1612 1838XX-V-TL-NL 719TL-NL 1380 1596 1612 1838

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.For Door Heights over 7' up to 8' extension rods are furnished at no additional charge.For Door Heights over 8' up to 10', see page 56 for extension add.Handing: The XX-V Device, Lever Trims and 719 Trim are handed and field reversible. Device and Trim are furnished RHR when handing is not specified.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The EO Device is compatible with all device functions except all L and K. When ordering device only for L and K functions specify devicewith function “less trim”. Example: XX-V-L less trim.NL function is in device, trim does not change.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:Optional Sex Bolts are recommended for center case, end case and latch mounting when device is used with hollow corewood, composite or light gauge hollow metal doors. See chart below for quantities and list prices.

Latches Center/End CaseApplication Sex Bolt 2729 Sex Bolt 2729 List Add

EO (exit only device) 6 8 $91Device x Athena Trim 6 8 91Device x all other Trims 6 4 65

▲●

▲●

★ ▲●

▲●

★

★

★

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

◆

◆

◆

●

●

●

◆

●

▲

■



Device Series F-XX-VDevices are furnished standard for door widths up to 4'


FIRE EXIT HARDWARE US3Surface Vertical Rod Devices US4 SP313 US26(Price includes 3788 and 2130 Strikes) Control Trim US10 US32D US26D US32

F-XX-V-EO – 1572 1773 1915 1973Athena

F-XX-V-DT 815DT 1676 1964 2106 2164F-XX-V-NL 815NL 1685 1979 2121 2179F-XX-V-C 815C 1607 1825 1967 2025F-XX-V-TP 815TP 1707 2002 2144 2202F-XX-V-TP-BE 815TP-BE 1707 2002 2144 2202F-XX-V-TP-NL 815TP 1707 2002 2144 2202

KnobF-XX-V-K 811K 1749 1982 2157 2215F-XX-V-K-BE 811K-BE 1749 1982 2157 2215F-XX-V-K-NL 811K 1749 1982 2157 2215F-XX-V-K-DT 811K-DT 1749 1982 2157 2215

Dane LeverF-XX-V-L 812L 1856 2106 2254 2312F-XX-V-L-BE 812L-BE 1856 2106 2254 2312F-XX-V-L-NL 812L 1856 2106 2254 2312F-XX-V-L-DT 812L-DT 1856 2106 2254 2312

Delta Thumb LeverF-XX-V-TL 719TL 1823 2024 2182 2240F-XX-V-TL-BE 719TL-BE 1823 2024 2182 2240F-XX-V-TL-NL 719TL-NL 1823 2024 2182 2240

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.For Door Heights over 7' up to 8' extension rods are furnished at no additional charge.For Door Heights over 8' up to 10', see page 56 for extension add.Handing: The F-XX-V Device, Lever Trims and 719 Trim are handed and field reversible. Device and Trims are furnished RHR when handing is not specified.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The EO Device is compatible with all device functions except all L, K and KIL. When ordering device only for L, K and KIL functionsspecify device with function “less trim”. Example: F-XX-V-L less trim. NL function is in device, trim does not change. Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:Sex Bolts are required and added to the order for center case, end case and latch mounting when device is used with wood,composite or non-reinforced hollow metal doors. See chart below for quantities and list prices.

Latches Center/End CaseApplication Sex Bolt 2729 Sex Bolt 2729 List Add

EO (exit only device) 6 8 $91Device x Athena Trim 6 8 91Device x all other Trims 6 4 65

★

▲●

▲●

★ ▲●

▲●

★

★

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

◆

◆

◆

●

●

●

◆

●

▲

■

■



XX-M Device SeriesDevices are furnished standard for door widths up to 4' and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

EXIT HARDWARE US3Mortise Lock Devices US4 SP313 US26(Price includes 1279 Strike) Trim US10 US32D US26D US32

XX-M-EO – 1090 1224 1301 1337Athena

XX-M-DT 815DT 1194 1415 1492 1528XX-M-NL 815NL 1203 1430 1507 1543XX-M-C 815C 1125 1276 1353 1389XX-M-TP 815TP 1225 1453 1530 1566XX-M-TP-BE 815TP-BE 1225 1453 1530 1566XX-M-TP-NL 815TP 1225 1453 1530 1566

KnobXX-M-K 811K 1267 1433 1543 1579XX-M-K-BE 811K-BE 1267 1433 1543 1579XX-M-K-NL 811K 1267 1433 1543 1579XX-M-K-DT 811K-DT 1267 1433 1543 1579

Dane LeverXX-M-L 812L 1374 1557 1640 1676XX-M-L-BE 812L-BE 1374 1557 1640 1676XX-M-L-NL 812L 1374 1557 1640 1676XX-M-L-DT 812L-DT 1374 1557 1640 1676

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to pages 52-53.For Standard and Optional Strikes, refer to page 46.Handing: The XX-M Device is handed but not field reversible. Specify handing RHR or LHR.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The Mortise Lock determines function of the device. When ordering device only, specify device with function “Less Trim”. Example: XX-M-L less trim.NL function is in mortise lock, trim does not change.



★

▲

▲

★▲

▲

★

★

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

◆

●

▲

◆



Device Series F-XX-MDevices are furnished standard for door widths up to 4'


FIRE EXIT HARDWARE US3Mortise Lock Devices US4 SP313 US26(Price includes 1279 Strike) Control Trim US10 US32D US26D US32

F-XX-M-EO – 1200 1291 1450 1487Athena

F-XX-M-DT 815DT 1304 1482 1641 1678F-XX-M-NL 815NL 1313 1497 1656 1693F-XX-M-C 815C 1235 1343 1502 1539F-XX-M-TP 815TP 1335 1520 1679 1716F-XX-M-TP-BE 815TP-BE 1335 1520 1679 1716F-XX-M-TP-NL 815TP 1335 1520 1679 1716

KnobF-XX-M-K 811K 1377 1500 1692 1729F-XX-M-K-BE 811K-BE 1377 1500 1692 1729F-XX-M-K-NL 811K 1377 1500 1692 1729F-XX-M-K-DT 811K-DT 1377 1500 1692 1729

Dane LeverF-XX-M-L 812L 1484 1624 1789 1826F-XX-M-L-BE 812L-BE 1484 1624 1789 1826F-XX-M-L-NL 812L 1484 1624 1789 1826F-XX-M-L-DT 812L-DT 1484 1624 1789 1826

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.Handing: The F-XX-M Device is handed but not field reversible. Specify handing RHR or LHR.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The Mortise Lock determines function of the device. When ordering device only, specify device with function “Less Trim”. Example: F-XX-M-L less trim.NL function is in mortise lock, trim does not change.



★

▲

▲

★ ▲

▲

★

★

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

◆

●

▲

◆



XX-C Device SeriesDevices are furnished standard for door widths up to 4' and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

EXIT HARDWARE US3Concealed Vertical Rod Devices US4 SP313 US26(Price includes 4188 and 2130 Strikes) Trim/Control US10 US32D US26D US32

XX-C-EO – 1298 1456 1636 1673Delta

XX-C-DT 717DT 1449 1640 1853 1890XX-C-DT 718DT 1589 1621 1869 1906XX-C-NL 718NL 1449 1640 1853 1890XX-C-C 718C 1416 1607 1801 1838XX-C-TP 718TP 1549 1790 1970 2007XX-C-TP-BE 718TP-BE 1549 1790 1970 2007XX-C-TP-NL 718TP-NL 1549 1790 1970 2007XX-C-TL 719TL 1549 1707 1903 1940XX-C-TL-BE 719TL-BE 1549 1707 1903 1940XX-C-TL-NL 719TL-NL 1549 1707 1903 1940XX-C-TLP 719TLP 1549 1707 1918 1955XX-C-TLP-BE 719TLP-BE 1549 1707 1918 1955XX-C-TLP-NL 719TLP-NL 1549 1707 1918 1955

KnobXX-C-K 711K 1440 1661 1894 1931XX-C-K-BE 711K-BE 1440 1661 1894 1931XX-C-K-NL 711K-NL 1440 1661 1894 1931XX-C-K-DT 711K-DT 1440 1661 1894 1931

Dane Lever ControlsXX-C-L 712L 1580 1754 1955 1992XX-C-L-BE 712L-BE 1580 1754 1955 1992XX-C-L-NL 712L-NL 1580 1754 1955 1992XX-C-L-DT 712L-DT 1580 1754 1955 1992

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.For Door Heights over 7' up to 8' extension rods are furnished at no additional charge.For Door Heights over 8' up to 10', see page 56 for extension add.Handing: All XX-C Device is handed but not field reversible. Specify handing RHR or LHR.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The “EO” Device is compatible with all device functions.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.


Application Sex Bolt 2729 List AddEO (exit only device) 8 $52Device x all other Trims 4 26

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

■

◆

▲

▲

▲

▲

■

◆

◆

◆

◆

◆

◆

◆

◆

◆

◆



Device Series F-XX-CDevices are furnished standard for door widths up to 4'


FIRE EXIT HARDWARE US3Concealed Vertical Rod Devices US4 SP313 US26(Price includes 4188 and 2130 Strikes ) Control Trim US10 US32D US26D US32

F-XX-C-EO – 1409 1567 1582 1612Delta

F-XX-C-DT 717DT 1560 1751 1799 1829F-XX-C-DT 718DT 1700 1732 1815 1845F-XX-C-NL 718NL 1560 1751 1799 1829F-XX-C-C 718C 1527 1718 1747 1777F-XX-C-TP 718TP 1660 1901 1916 1946F-XX-C-TP-BE 718TP-BE 1660 1901 1916 1946F-XX-C-TP-NL 718TP-NL 1660 1901 1916 1946F-XX-C-TL 719TL 1660 1818 1849 1879F-XX-C-TL-BE 719TL-BE 1660 1818 1849 1879F-XX-C-TL-NL 719TL-NL 1660 1818 1849 1879F-XX-C-TLP 719TLP 1660 1818 1864 1894F-XX-C-TLP-BE 719TLP-BE 1660 1818 1864 1894F-XX-C-TLP-NL 719TLP-NL 1660 1818 1864 1894

KnobF-XX-C-K 711K 1551 1772 1840 1870F-XX-C-K-BE 711K-BE 1551 1772 1840 1870F-XX-C-K-NL 711K-NL 1551 1772 1840 1870F-XX-C-K-DT 711K-DT 1551 1772 1840 1870

Dane Lever ControlsF-XX-C-L 712L 1691 1865 1901 1931F-XX-C-L-BE 712L-BE 1691 1865 1901 1931F-XX-C-L-NL 712L-NL 1691 1865 1901 1931F-XX-C-L-DT 712L-DT 1691 1865 1901 1931

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.For Door Heights over 7' up to 8' extension rods are furnished at no additional charge.For Door Heights over 8' up to 10', see page 56 for extension add.Handing: All F-XX-C Device is handed but not field reversible. Specify handing RHR or LHR.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The “EO” Device is compatible with all device functions.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.


Application Sex Bolt 2729 List AddEO (exit only device) 8 $52Device x all other Trims 4 26

■ ●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

■

◆

▲

▲

▲

▲

◆

◆

◆

◆

◆

◆

◆

◆

◆

◆



XX-CWDC Device Series Devices are furnished standard for door widths up to 4' and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

EXIT HARDWARE US3Wood Door Concealed Vertical Rod Devices US4 SP313 US26(Price includes 4188 and 2130 Strikes ) Trim/Control US10 US32D US26D US32

XX-C-WDC-EO – 1760 2015 2163 2199Delta

XX-C-WDC-DT 717DT 1911 2199 2380 2416XX-C-WDC-DT 718DT 2051 2180 2396 2432XX-C-WDC-NL 718NL 1911 2199 2380 2416XX-C-WDC-C 718C 1878 2166 2328 2364XX-C-WDC-TP 718TP 2011 2349 2497 2533XX-C-WDC-TP-BE 718TP-BE 2011 2349 2497 2533XX-C-WDC-TP-NL 718TP-NL 2011 2349 2497 2533XX-C-WDC-TL 719TL 2011 2266 2430 2466XX-C-WDC-TL-BE 719TL-BE 2011 2266 2430 2466XX-C-WDC-TL-NL 719TL-NL 2011 2266 2430 2466XX-C-WDC-TLP 719TLP 2011 2266 2445 2481XX-C-WDC-TLP-BE 719TLP-BE 2011 2266 2445 2481XX-C-WDC-TLP-NL 719TLP- NL 2011 2266 2445 2481

KnobXX-C-WDC-K 711K 1902 2220 2421 2457XX-C-WDC-K-BE 711K-BE 1902 2220 2421 2457XX-C-WDC-K-NL 711K-NL 1902 2220 2421 2457XX-C-WDC-K-DT 711K-DT 1902 2220 2421 2457

Dane Lever ControlsXX-C-WDC-L 712L 2042 2313 2482 2518XX-C-WDC-L-BE 712L-BE 2042 2313 2482 2518XX-C-WDC-L-NL 712L-NL 2042 2313 2482 2518XX-C-WDC-L-DT 712L-DT 2042 2313 2482 2518

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.For Door Heights over 7' up to 8' extension rods are furnished at no additional charge.For Door Heights over 8' up to 10', see page 56 for extension add.Handing: All XX-C-WDC Device is handed but not field reversible. Specify handing RHR or LHR.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The “EO” Device is compatible with all device functions.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.


Application Sex Bolt 2729 List AddEO (Exit only device) 8 $52Device x all other trim 4 26

■ ●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

■

◆

▲

▲

▲

▲

◆

◆

◆

◆

◆

◆

◆

◆

◆

◆



Device Series F-XX-C-WDCDevices are furnished standard for door widths up to 4'

for 90 minute doors, and priced complete with standard trim and strikes. Cylinders are not included in price unless noted.

FIRE EXIT HARDWARE US3Wood Door Concealed Vertical Rod Devices US4 SP313 US26(Price includes 4188 and 2130 Strikes ) Trim/Control US10 US32D US26D US32

F-XX-C-WDC-EO – 1910 2165 2313 2349Delta Trim

F-XX-C-WDC-DT 717DT 2061 2349 2530 2566F-XX-C-WDC-DT 718DT 2201 2330 2546 2582F-XX-C-WDC-NL 718NL 2061 2349 2530 2566F-XX-C-WDC-C 718C 2028 2316 2478 2514F-XX-C-WDC-TP 718TP 2161 2499 2647 2683F-XX-C-WDC-TP-BE 718TP-BE 2161 2499 2647 2683F-XX-C-WDC-TP-NL 718TP-NL 2161 2499 2647 2683F-XX-C-WDC-TL 719TL 2161 2416 2580 2616F-XX-C-WDC-TL-BE 719TL-BE 2161 2416 2580 2616F-XX-C-WDC-TL-NL 719TL-NL 2161 2416 2580 2616F-XX-C-WDC-TLP 719TLP 2161 2416 2580 2616F-XX-C-WDC-TLP-BE 719TLP-BE 2161 2416 2580 2616F-XX-C-WDC-TLP-NL 719TLP- NL 2161 2416 2580 2616

Knob ControlF-XX-C-WDC-K 711K 2052 2370 2571 2607F-XX-C-WDC-K-BE 711K-BE 2052 2370 2571 2607F-XX-C-WDC-K-NL 711K-NL 2052 2370 2571 2607F-XX-C-WDC-K-DT 711K-DT 2052 2370 2571 2607

Dane Lever ControlF-XX-C-WDC-L 712L 2192 2463 2632 2668F-XX-C-WDC-L-BE 712L-BE 2192 2463 2632 2668F-XX-C-WDC-L-NL 712L-NL 2192 2463 2632 2668F-XX-C-WDC-L-DT 712L-DT 2192 2463 2632 2668

REFERENCE NOTES:For Standard and Optional Trims/Controls, refer to page 52-53.For Standard and Optional Strikes, refer to page 46.For Door Heights over 7' up to 8' extension rods are furnished at no additional charge.For Door Heights over 8' up to 10', see page 56 for extension add.Handing: All F-XX-C-WDC Device is handed but not field reversible. Specify handing RHR or LHR.The Dane Lever is furnished standard. Optional lever designs Avalon, Quantum and Sutro are available at no additional charge.The “EO” Device is compatible with all device functions.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

Sex Bolts:90 minute doors for WDC fire devices assume a Steel Channel Door Construction (SCDC).Sex Bolts are required and added to the order for center case mounting when device is used with hollow core or composite doors.See chart below for quantities and list prices.

Application Sex Bolt 2729 List AddEO (Exit only device) 8 $52Device x all other trim 4 26

■ ●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

■

◆

▲

▲

▲

▲

◆

◆

◆

◆

◆

◆

◆

◆

◆

◆

XX Device OptionsLess Bottom RodSuffix

LBR Available at no additional charge on Vertical and Concealed Vertical Rod Devices NCFire rated LBR devices must be ordered in pairs of Vertical Rod Devices. For Fire Rated Devices specify one device LBR and second device LBR-AFL.

Second device provided with an Auxiliary Fire Bolt Latch.

WDC Fire LBR devices are for 20 minute rating only. Consult Wood Door manufacturer for

UL Fire Ratings greater than 20 Minutes.

Electric Lock or Unlock of TrimsPrefix List Add

FSA Electric Lock/Unlock Trim, Fail Safe (unlocks when power is interrupted). 288Available on XX series Rim and Surface Vertical Devices.

FSE Electric Lock/Unlock Trim, Fail Secure (locks when power is interrupted). 288

Available on XX series Rim and Surface Vertical Devices.





StrikesUn- US4 SP313

Model No. Description finished US19 US26D US32D US10 US10B US3 US26

Rim Strikes264 24/25-R Panic Devices - Optional — 76 87 — — — — —299 24/25-R Panic Devices - Standard — 45 54 — 54 54 70 70299F 24/25-R Fire Devices - Standard — 58 — 75 88 88 102 102499F 25-R Fire Devices - Optional — 136 — 141 — — — ―

F490 19-R/XX-R Panic and Fire Devices - Optional 40 — — — — — — —565 19-R/XX-R Panic Devices - Optional — — 40 — 40 40 40 —F570 19-R/XX-R Panic and Fire Devices - Standard — 40 — — — — — —571 19/XX-R inactive Leaf Strike 2 7/8˝ backset - Optional — — — 40 40 40 40 40571A 19/XX-R inactive Leaf Strike 2 3/8˝ backset - Optional — — — 40 40 40 40 40579 XX-R Panic Devices - Optional — — 40 — 40 40 40 —1439 24/25-R Panic Devices - Optional — 110 — — — — — —1606 24/25-R Panic Devices - Optional 55 — — — — — — —1609 25-R Panic Devices - Optional — 76 84 — 84 84 90 90

Vertical Rod Top Strikes3788 19/24/25/XX-V Panic and Fire Devices - Standard 40 — — — — — — —4188 24/25/XX-C, CWDC Panic and Fire Devices - Standard 40 — — — — — — —4188NS 24-C, CWDC Panic Devices - Optional 40 — — — — — — —

Vertical Rod Bottom Strikes2130 19-V/24/25/XX-V,C,CWDC Panic or Fire - Standard 40 — — — — — — —4155 19-V/24/25/XX-V,C,CWDC Panic or Fire - Optional — — 40 — 40 40 40 40

Mortise Lock Strikes1279 25/XX-M Panic and Fire Devices - Standard 40 — — — — — — —F1280 25-M Fire Devices - Optional 40 — — — — — — —1281 25/XX-M Panic Devices - Optional — — 40 — 40 40 40 40

REFERENCE NOTES:Refer to device catalogs for specific door application strike requirements.For Flush Transom applications, Specify 4215 Angle Bracket, add $40 List.For mounting plate, Specify 4306, add $29 List.1609 Strike must be used with a Coordinator. Not a UL fire exit hardware listed application.

●

●

●

▲

▲

How to Order Sequence Example510 L - R US26D LHR SUTRO FSE CYL

Trim SeriesD24 Series D25 Series 19 Series XX Series

710 510 910 810

711 511 911 811

712 512 912 812

715 513 914 814

717 717 917 815

718 920 816

719 930 820

711

712

717

718

719

Trim Function (see Trim pages for all functions)

EO Exit OnlyDT Dummy TrimNL Night LatchC Cylinder Trim Less PullTP ThumbpieceK KnobL Lever (Dane Standard)KIL Key in LeverTL Thumb Lever

Device TypeR RimV Surface Vertical RodM MortiseC Concealed Vertical Rod (includes WDC)

FinishUS3 US15 US32D

US4 US26 SP28

US10 US26D SP313

US10B US32

HandingRHR Right Hand ReverseLHR Left Hand Reverse

Lever StyleDANE supplied standard if not specifiedSUTRO

QUANTUM

AVALON

Trim OptionsFSA Electric Lock or Unlock-Fail Safe (FSA device required)FSE Electric Lock or Unlock-Fail Secure (FSE device required)

Other Information or AccessoriesCYL Include Cylinder with TrimKD Cylinder Keyed Different

Door ThicknessSpecify door thickness other than 1-3/4"

Trim - How to Order





Series Trims 19For other possible trim applications not shown, consult factory.


19 Series TrimOld Lever SP28

Model No. Model No. Style Description SP313 US15Trident Trim

920DT 1953DT – Dummy Trim 44 –920NL 1955P – Night Latch 76 –

Centron Trim930EO 2301BE – Exit Only 40 40917DT 1904 Pull Only – Dummy Trim 35 35930DT 2303DT – Dummy Trim 44 44930NL 2305P – Night Latch 61 61930C 2302C – Night Latch Less Pull 54 54

Control Trim918DT – Dummy Trim 128 233918NL – Night Latch 128 233

910DT 1908DT – Dummy Trim 128 233910NL 1909P – Night Latch 128 233910TP 1906T – Thumbpiece, Key Locks or Unlocks 128 233910TP-BE 1926T LS/LK – Thumbpiece, Blank Escutcheon 128 233911TP-NL – – Thumbpiece, Night Latch 128 233911K 1907K – Knob, Key Locks or Unlocks 128 233911K-BE 1927K LS/LK – Knob, Blank Escutcheon 128 233911K-DT 1987K-DT – Knob, Dummy Trim 128 233911K-NL – – Knob, Night Latch 128 233912L 1910L Dane Lever, Key Locks or Unlocks 177 272912L-BE 1920L LS/LK Dane Lever, Blank Escutcheon 177 272912L-NL 1910L-NL Dane Lever, Night Latch 177 272912L-DT 1980L-DT Dane Lever, Dummy Trim 177 272

Key In Lever Trims914KIL-KD 2400KIL – Key in Lever, Keyed Different 213 213914KIL-BE 2401KIL LS/LK – Key in Lever, Blank Escutcheon 213 213914KIL-NL-KD 2402KIL NL – Key in Lever, Night Latch, Keyed Different 213 213914KIL-IC 2400KIL W/IC CORE – Key in Lever with IC Core 262 262

REFERENCE NOTES:The Dane Lever is furnished standard. Optional lever designs Sutro, Quantum and Avalon are available at no additional charge.Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified.Handing: 920 series Trims are handed and not field reversible. Specify handing RHR or LHR.Available in SP313 and US32D finishes only.Available 2/28/2011.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

**◆

◆

◆ ●

◆ ●

◆●

●

◆ ●

●

●

●

●

▲ ●

▲ ●

▲ ●

▲ ●

●

■

▲

*◆

■

■

▲

▲

▲

▲



24 Series Trim

Old Device US4 Model No. Model No. Type Description SP28 SP313 US10 US15

Athena Trim 715DT 1303DT R, V Dummy Trim 104 191 104 ― 191

142 205 142 205 258142 205 142 205 258142 205 142 205 258142 205 142 205 258142 205 142 205 258142 205 142 205 258142 205 142 205 258142 205 142 205 258

Control Trim 710DT 1797DT R, V Dummy Control 710NL 1799P R, V Night Latch 710TP 1796T R, V Thumbpiece, Key Locks or Unlocks 710TP-BE 1793T LS/LK R, V Thumbpiece, Blank Escutcheon 711K 1604K R, V Knob, Key Locks or Unlocks 711K 1764K C Knob, Key Locks or Unlocks 711K-BE 1614K LS/LK R, V Knob, Blank Escutcheon 711K-BE 1774K LS/LK C Knob, Blank Escutcheon

142 205 142 205 258142 205 142 205 258

711K-DT 1624K-DT R, V Knob, Dummy Control711K-DT 1784K-DT C Knob, Dummy Control

142 205 142 205 258142 205 142 205 258

711K-NL 1624K-NL R, V Knob, Dummy Control711K-NL 1784K-NL C Knob, Dummy Control

Delta Controls 717DT 1600-DT R, V Dummy Trim 151 184 151 184 217

151 184 151 184 217291 165 291 165 233291 165 165 165 233151 184 151 184 217151 184 151 184 217118 151 118 151 165118 151 118 151 165251 334 251 334 334251 334 251 334 334251 334 251 334 334251 334 251 334 334251 251 251 251 267251 251 251 251 267251 251 251 251 267251 251 251 251 267251 251 251 251 267251 251 251 251 267251 251 251 251 282251 251 251 251 282251 251 251 251 282

717DT 1760-DT C Dummy Trim 718DT 1622T-DT R, V Dummy Trim 718DT 1743T-DT C Dummy Trim 718NL 1601P R, V Night Latch 718NL 1740P C Night Latch 718C 1603C R, V Night Latch Less Pull 718C 1713C C Night Latch Less Pull 718TP 1602T R, V Thumbpiece, Key Locks or Unlocks 718TP 1741T C Thumbpiece, Key Locks or Unlocks 718TP-BE 1612T LS/LK R, V Thumbpiece, Blank Escutcheon 718TP-BE 1742T LS/LK C Thumbpiece, Blank Escutcheon 719TL 1618SL V Thumbturn, Key Locks or Unlocks 719TL 1738SL C Thumbturn, Key Locks or Unlocks 719TL-BE LS/LK V Thumbturn, Blank Escutcheon 719TL-BE C Thumbturn, Blank Escutcheon 719TL-NL 1619SL-NL V Thumbturn, Night Latch 719TL-NL 1739SL-NL C Thumbturn, Night Latch 719TLP 1728SLP C Thumbturn with Pull 719TLP-BE C Thumbturn with Pull, Blank Escutcheon

C Thumbturn with Pull, Night Latch

REFERENCE NOTES:Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified. 715DT not available in US32 or US32D finish.

Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

24 Series TrimsFor other possible trim applications not shown, consult factory. Cylinders are not included in price unless noted.

US3US26

US26D

719TLP-NL 1729SLP-NL

Electric Lock or Unlock option is available on Trims for use on Rim or Surface Vertical Devices.Available with TP, K or L functions only.Suffix FSA for Fail Safe operation, or FSE for Fail Secure operation. Add $288 list.

24 Series Trim

Old Device Lever US4 Model No. Model No. Type Style Description SP28 SP313 US10 US15

Control Lever Trim 712L 1606L R, V Dane Lever, Key Locks or Unlocks 282 298 282 298 319

282 298 282 298 319282 298 282 298 319282 298 282 298 319282 298 282 298 319282 298 282 298 319282 298 282 298 319282 298 282 298 319

712L 1766L C Dane Lever, Key Locks or Unlocks 712L-BE 1616L LS/LK R, V Dane Lever, Blank Escutcheon 712L-BE 1776L LS/LK C Dane Lever, Blank Escutcheon 712L-NL 1606L-NL R, V Dane Lever, Night Latch 712L-NL 1766L-NL C Dane Lever, Night Latch 712L-DT 1626L-DT R, V Dane Lever, Dummy Trim 712L-DT 1786L-DT C Dane Lever, Dummy Trim

(continued) Series Trims 24For other possible trim applications not shown, consult factory.


US3US26

US26D

REFERENCE NOTES:

Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified. The Dane Lever is furnished standard. Optional lever designs Sutro, Quantum and Avalon are available at no additional charge.

Electric Lock or Unlock option is available on Trims for use on Rim or Surface Vertical Devices.Available with TP, K or L functions only.Suffix FSA for Fail Safe operation, or FSE for Fail Secure operation. Add $288 list.



25 Series Trim US3

Lever Device SP28 US4 US26 Model No. Style Type Description SP313 * US10 US32D US26D US32

Lever Trim 510L Dane R, V, M, C Lever, Key Locks or Unlocks 298 298 349 349 356

239 239 280 280 285239 239 280 280 285298 298 349 349 356

349 349 400 400 408

214 214 235 235 276267 267 293 293 344267 267 293 293 344

224 224 263 263 306224 224 263 263 306224 224 263 263 306224 224 263 263 306

151 184 151 184 217 217118 151 118 151 165 165

510L-NL Dane R, V, M, C Lever, Night Latch 510L-DT Dane R, V, M, C Lever, Dummy Trim 510L-BE Dane R, V, M, C Lever, Blank Escutcheon

Optional Lever designs Avalon, Quantum and Sutro are available at no additional charge.

Vandal Resistant Trim 511L Dane R, V, M, C Lever, Key Locks and Unlocks

Optional Lever designs Avalon, Quantum and Sutro are available at no additional charge.

512TP R, V, M, C Thumbpiece, Key Locks and Unlocks512NL R, V, M, C Night Latch

512TP-BE R, V, M, C Thumbpiece, Blank Escutcheon

Knob Trim 513K R, V, M, C Knob, Key Locks or Unlocks 513K-NL R, V, M, C Knob, Night Latch 513K-DT R, V, M, C Knob, Dummy Trim 513K-BE R, V, M, C Knob, Blank Escutcheon

US3US4 US26

DeltaTrim SP28 SP313 US10 US32D US26D US32717DT R, V, M, C Dummy Trim

Dummy Trim512DT R, V, M, C 180 180 182 182 276

REFERENCE NOTES:

* Trim furnished in SP313 finish when ordered with 313AN devices

25 Series TrimsFor other possible trim applications not shown, consult factory.Cylinders are not included in price unless noted.

718C C

Night Latch and Thumbpiece Trim

Dummy Trim

Night Latch Less Pull

Handing: Trims are handed and field reversible. Trims are furnished RHR when handing is not specified.•

••

••••

•





Series Trims XXFor other possible trim applications not shown, consult factory.


US3XX Series Trim US26

Old Device US4 SP313 US26DModel No. Model No. Type Description US10 US32D US32

Athena Trim815DT 1300DT R, V, M Dummy Trim 104 191 191 815NL 1301P R, V, M Night Latch 113 206 206815C 3577C R, V, M Night Latch Less Pull 35 52 52815TP 1302T R, V, M Thumbpiece, Key Locks or Unlocks 135 229 229815TP-BE R, V, M Thumbpiece, Blank Escutcheon 135 229 229

Delta Trim718DT 1760DT C Dummy Trim 291 165 233717DT 1743T-DT C Dummy Trim 151 184 217718NL 1740P C Night Latch 151 184 217718C 1713C C Night Latch Less Pull 118 151 165718TP 1741T C Thumbpiece, Key Locks or Unlocks 251 334 334718TP-BE 1742T LS/LK C Thumbpiece, Blank Escutcheon 251 334 334719TL 1618SL V Thumbturn, Key Locks or Unlocks 251 251 267719TL 1738SL C Thumbturn, Key Locks or Unlocks 251 251 267719TL-BE 1658SL LS/LK V Thumbturn, Blank Escutcheon 251 251 267719TL-BE C Thumbturn, Blank Escutcheon 251 251 267719TL-NL 1619SL-NL V Thumbturn, Night Latch 251 251 267719TL-NL 1739SL-NL C Thumbturn, Night Latch 251 251 267719TLP 1728SLP C Thumbturn with Pull 251 251 282719TLP-BE C Thumbturn with Pull, Blank Escutcheon 251 251 282719TLP-NL 1729SLP-NL C Thumbturn with Pull, Night Latch 251 251 282

Vanguard Trim820EO 1348 R, V, M Exit Only 106 131 131820DT 1344DT R, V, M Dummy Trim 131 151 151820NL 1345P R, M, XXV Night Latch 165 165 200820TP 1346T R Thumbpiece, Key Locks or Unlocks 194 242 251820TP 1346T V, M Thumbpiece, Key Locks or Unlocks 194 242 251820TP-BE 1346T LS/LK R, M Thumbpiece, Blank Escutcheon 194 242 251

Apollo Trim810EO 1448 R, V, M Exit Only 104 104 131810DT 1444DT R, V, M Dummy Trim 121 151 184810NL 1445P R, M, XXV Night Latch 130 159 200810TP 1446T R Thumbpiece, Key Locks or Unlocks 150 184 200810TP 1446T V, M Thumbpiece, Key Locks or Unlocks 150 184 200810TP-BE 1446T LS/LK R, V, M Thumbpiece, Blank Escutcheon 150 184 200

REFERENCE NOTES:Handing: 700 Series Delta Trims are handed but field reversible. Trims are furnished RHR when handing is not specified.

Electric Lock or Unlock option is available on XX series Rim and Surface Vertical Rod Devices. FSA or FSE option on device required.For replacement trim specify trim with suffix FSA for fail safe option or FSE for fail secure operation. For FSA or FSE function with deviceand trim see page 45.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

▲

▲

▲

▲

▲

▲

●

▲

◆

◆

◆

◆

◆

◆

◆

◆

◆

◆

◆



XX Series Trims (continued)

For other possible trim applications not shown, consult factory.Cylinders are not included in price unless noted.

US3XX Series Trim US26

Old Device Lever US4 US10B US26DModel No. Model No. Type Style Description US10 US32D US32

Knob Trim811K 1811K R, V, M Knob, Key Locks or Unlocks 177 209 242 711K 1764K C Knob, Key Locks or Unlocks 142 205 258811K-BE 1812K LS/LK R, V, M Knob, Blank Escutcheon 177 209 242711K-BE 1774K LS/LK C Knob, Blank Escutcheon 142 205 258811K-DT 1810K-DT R, V, M Knob, Dummy Trim 177 209 242711K-DT 1784K-DT C Knob, Dummy Trim 142 205 258

Lever Trim812L 1821L R, V, M Dane Lever, Key Locks or Unlocks 284 333 339712L 1766L C Dane Lever, Key Locks or Unlocks 282 298 319812L-BE 1822L LS/LK R, V, M Dane Lever, Blank Escutcheon 284 333 339712L-BE 1776L-LS/LK C Dane Lever, Blank Escutcheon 282 298 319812L-DT 1820L-DT R, V, M Dane Lever, Dummy Trim 284 333 339712L-DT 1786L-DT C Dane Lever, Dummy Trim 282 298 319

Breakaway Lever Trim816L 1821ST R, V, M Dane Lever, Key Locks or Unlocks 333 382 388816L-BE 1822ST LS/LK R, V, M Dane Lever, Blank Escutcheon 333 382 388816L-NL 1821ST-NL R, V, M Dane Lever, Night Latch 333 382 388816L-DT 1820ST-DT R, V, M Dane Lever, Dummy Trim 333 382 388

▲

●

●

●

▲●

●

▲●

●

●

●

▲●

▲●

●

●

REFERENCE NOTES:The Dane Lever is furnished standard. Optional lever designs Sutro, Quantum, and Avalon are available at no additional charge.Handing: 711 and 814 Trims are handed but field reversible. Trims are furnished RHR when handing is not specified.Electric Lock or Unlock option is available on XX series Rim and Surface Vertical Rod Devices. FSA or FSE option on device required. For replacement trim specify trim with suffix FSA for fail safe option or FSE for fail secure operation.For FSA or FSE function with device and trim see page 45 for pricing.Available until 2/25/2011. Trim to be discontinued effective 2/28/2011.

●

▲

◆

◆

◆



Cover Plates & Filler Plates

Cylinders

Model No. Description Unfinished SP313 US32D4167 For 19 Series TP and DT Controls when used on 86 or 161 door preps — 32 474168 For 19 Series EO when used on 86 door preps — 32 474170 For 19 Series K and L Controls when used on 86 or 161 door preps — 32 474174 For 19 Series device (push side) when used on 86 door preps — 32 473722 Strike Cover - ASA 4 - 7/8" 11 — —3723 Mortise front - 8" x 1-1/4" 11 — —3721 Lock front - 2-1/4" x 1-1/8" 11 — —

US4US10

Model No. Description SP313 US26D US3 4032 Rim Cylinder, Keyed Different 30 30 304033 Threaded Mortise Cylinder, Keyed Different 30 30 304034 Threaded 1-1/2" Mortise Cylinder 30 30 30

US4 US3US10 US32

Model No. Description US10B US26D US32D 985 1-1/8" Mortise Cylinder 53 53 55986 1-1/4" Mortise Cylinder 53 53 55951 Rim Cylinder 53 53 55C987 1-3/8" Interchangeable Core Mortise Cylinder 33 33 35C953 Interchangeable Core Rim Cylinder 34 34 36

Cylinder Dogging KitsUS4

SP28 US28 US10 US3

Model No. Description SP313 US32D 313AN US26D US26

19CDK-3 19 Series Cylinder Dogging Kit - 3' device 57 57 ― ― ―

19CDK-4 19 Series Cylinder Dogging Kit - 4' device 57 57 ― ― ―

24CDK-3 24 Series Cylinder Dogging Kit - 3' device ― 57 57 57 5724CDK-4 24 Series Cylinder Dogging Kit - 4' device ― 57 57 57 5725CDK-3 25 Series Cylinder Dogging Kit - 3' device ― 57 57 57 5725CDK-4 25 Series Cylinder Dogging Kit - 4' device ― 57 57 57 57

REFERENCE NOTES:Custom Keying not available. Falcon G - default keyway.

Electric and Alarm Kits

Dummy Touch Bars

REFERENCE NOTES: When used with outside trim for back to back mounting, finished fasteners are required, add $10.00 list.

Note: price shown are for 3' length, for 4' length add $25.00 to list price.

SP28 US4 US10B US3, US32 Model No. SP313 US10 US32D US26, US26D 190DT 19 Series Dummy Touch Bar 179 - - -250DT 24/25 Series Dummy Touch Bar 307 341 388 443

Optional Features:Prefix List Add

RX Touchbar Request to Exit Switch 203KOR Key Override device monitoring on a door by use of a keyed cylinder 53

US4

SP28 US28 US10 US3

Model No. Description Unfinished SP313 US32D 313AN US26D US26

19-EAK-3 19 Series Exit Alarm Kit 3' — 372 372 — — —19-EAK-4 19 Series Exit Alarm Kit 4' — 372 372 — — —24-EAK-3 24 Series Exit Alarm Kit 3' — — 372 372 372 37224-EAK-4 24 Series Exit Alarm Kit 4' — — 372 372 372 37225-EAK-3 25 Series Exit Alarm Kit 3' — — 372 372 372 37225-EAK-4 25 Series Exit Alarm Kit 4' — — 372 372 372 372

19-HWEAK-3 19 Series Hard Wired Exit Alarm Kit 3' — 761 761 — — —19-HWEAK-4 19 Series Hard Wired Exit Alarm Kit 4' — 761 761 — — —24-HWEAK-3 24 Series Hard Wired Exit Alarm Kit 3' — — 761 761 761 76124-HWEAK-4 24 Series Hard Wired Exit Alarm Kit 4' — — 761 761 761 76125-HWEAK-3 25 Series Hard Wired Exit Alarm Kit 3' — — 761 761 761 76125-HWEAK-4 25 Series Hard Wired Exit Alarm Kit 4' — — 761 761 761 761

24-EDK-3 24 Series Electric Dogging Kit 3' — — 372 372 372 37224-EDK-4 24 Series Electric Dogging Kit 4' — — 372 372 372 37225-EDK-3 25 Series Electric Dogging Kit 3' — — 372 372 372 37225-EDK-4 25 Series Electric Dogging Kit 4' — — 372 372 372 372

ELK-3 24/25 Electric Latch Retraction Kit 3' — 506 506 — 506 506ELK-4 24/25 Electric Latch Retraction Kit 4' — 506 506 — 506 506

24-AEK-3 24 Series Authorized Egress Switch Kit 3' — — 203 203 203 20324-AEK-4 24 Series Authorized Egress Switch Kit 4' — — 203 203 203 20325-AEK-3 25 Series Authorized Egress Switch Kit 3' — — 203 203 203 20325-AEK-4 25 Series Authorized Egress Switch Kit 4' — — 203 203 203 203

24/25-LMK 24/25 Series Latch Bolt Monitoring Switch Kit 203 — — — — —24/25-DMK 24/25 Series Bar & Latch Bolt Monitoring Switch Kit 203 — — — — —

24-KOR-K-3 24 Series Key Override Switch Kit 3' — — 203 203 203 20324-KOR-K-4 24 Series Key Override Switch Kit 4' — — 203 203 203 20325-KOR-K-3 25 Series Key Override Switch Kit 3' — — 203 203 203 20325-KOR-K-4 25 Series Key Override Switch Kit 4' — — 203 203 203 203





Extension Rods

Mullions

US3US4 US26

Model No. Description US10 US10B US26D

8500NL Night Latch 300 312 373REFERENCE NOTES:

1. Old Mortise Lock model numbers: 1284-RHR and 1285-LHR2. US32D and US32 finish device supplied with US26D and US26 mortise lock.3. Mortise Device is handed. For replacement of Mortise Lock only, handing is field reversible. Lock is furnished RHR when handing is not specified.

Optional Features:Prefix List AddLM Latch Bolt Monitoring Switch - Available on all functions 203DM Touch Bar and Latch Bolt Monitor Switch - Available on all functions 203FSA Electric Lock/Unlock Trim, Fail Safe - L and TP functions only. 288FSE Electric Lock/Unlock Trim, Fail Secure - L and TP functions only. 288

REFERENCE NOTES:Mullions are Prime Coat finish only. Fire Rated for doors up to 8´

Up to

Model No. Description 7'2" 8'2" 9'2" 10'2"

2923 For use with all Rim Devices 333 360 388 4284023 For use with all Rim Devices 374 406 428 470F4023* Fire Rated; for use with F-19-R, F-24/25-R, and F-XX-R 535 578 — —4423 T Shaped, includes Strike 24-R series only 882 902 — —

Mullion Options List Add

KR Keyed Removable option Prefix mullion model "KR"KR-4023 Mullion 340KR-F-4023 Mullion 506

Accessories List Each

KR-4023 Keyed Removal Kit for existing 4023 Mullion 340KR-F4023 Keyed Removal Kit for existing F4023 Mullion 506

List Add

STAB Stabilizer Blocks - Optional for 2923, 4023 and 4423 Mullions. 31Specify mullion “ x STAB”. Stabilizers standard with F4023 mullions.

Strikes are not included except where indicated.When required, strikes should be ordered with devices.

Mortise Locks

AllModel No. Description Finishes 650006 24/25/19/XX-V Extension Rod 12" 18650007 24/25/19/XX-V Extension Rod 24" 36650008 24/25/19/XX-V Extension Rod 36" 54650017 CV Extension Rod 12" 18650018 CV Extension Rod 24" 36650019 CV Extension Rod 36" 54

▲

▲



Sex Bolts

SLM Blocking

Model No. Description Part #

SLM-F-24-R/C F-24 Rim/Concealed Vertical SLM Blocking Kit 600333 15SLM-F-24-V F-24 Surface Vertical SLM Blocking Kit 600334 17SLM-F-25-R/C F-25 Rim/Concealed Vertical SLM Blocking Kit 600335 15SLM-F-25-V F-25 Surface Vertical SLM Blocking Kit 600336 17

For use with devices on doors with special high density blocking material.

Blocking material must be UL or Warnock Hersey approved.

Shim KitsModel No. Description US19

SK19-R 19 Rim Shim Kit - 1/4" 62SK19-V 19 Surface Vertical Shim Kit - 1/4" 62SK24-R 24 Rim Shim Kit - 1/4" 62SK24-V-8 24 Surface Vertical Shim Kit - 1/4" - over 7' up to 8' doors 62SK24-V-10 24 Surface Vertical Shim Kit - 1/4" - over 8' up to 10' doors 73SK25-R/M 25 Rim or 25 Mortise Shim Kit - 1/4" 62SK25V-8 25 Surface Vertical Shim Kit - 1/4" - over 7' up to 8' doors 62SK25V-10 25 Surface Vertical Shim Kit - 1/4" - over 8' up to 10' doors 73579 Retrofit Shim Kit - HH-25-R, HH-F25-R (Required) 25

REFERENCE NOTES:19 series shim kits for use on door thickness devices less trim. For devices with trim, consult factory.All shim kits for use on door thicknesses up to 2". Consult factory for door thickness over 2".

BRS US3, US4US10B US10, SP313

Model No. Description Screw US26D US32, US32D

2729P Package of 1 10-24 3/4" PPHMS 6.50 —2729F Package of 1 10-24 3/4" FPHMS 6.50 —4122 Package of 1 1/2-20 3/4" PPHMS 6.50 —325 Package of 2 10-24 — 16425 Package of 2 1/4-20 — 16



Device Series - Parts 19(F) 19 Exit Devices SP28Part No. Description Unfinished SP313 US32D Black

650307 19-R Center Case 70 – – –650374 F-19-R Center Case 87 – – –650308 19-V Center Case LHR 62 – – –650309 19-V Center Case RHR 62 – – –650384 19-R Center Case Cover Kit (w/Screws) – – – 31650385 19-V Center Case Cover Kit (w/Screws) – – – 31650338 19-R Center Case Cover Mounting Pkg 3.50 – – –650334 19-V Center Case Cover Mounting Pkg 3.50 – – –650393 19-V Center Case Retractor Cam 30 – – –650390 19-V Drawbar 9.50 – – –650391 19-V Center Case Drawbar Lever 18 – – –650392 19-V Center Case Slidebar Lever 12.50 – – –

4107 19 Push Bar Channel 3' Door – 107 276 –4108 19 Push Bar Channel 4' Door – 123 305 –650360 F-19 Channel Cover Plate 3' – 32 32 –650361 F-19 Channel Cover Plate 4' – 35 35 –650362 19 CD Channel Cover Plate 3' – 38 38 –650363 19 CD Channel Cover Plate 4' – 43 43 –650364 19 EA Channel Cover Plate 3' – 60 60 –650365 19 EA Channel Cover Plate 4' – 67 67 –

650297 19 Panic Hex Dogging Kit 4' Door – 69 102 –650303 19 Panic Hex Dogging Kit 3' Door – 50 81 –610480 19 Panic Dogging Housing 14 – – –060109 19 Panic Hex Dogging Key 7/32" (Pkg of 10) 12.50 – – –060110 19 Panic Dogging Pin (Pkg of 10) 3.50 – – –650343 19 Channel End Cap Kit (w/Screws) 20 – – –650320 19 End Cap Mounting Bracket with SNB – 9.50 – –

650328 19-R Mounting Pkg – 23 23 –650329 F-19-R Mounting Pkg – 23 23 –650330 19-V Mounting Pkg – 35 35 –650331 F-19-V Mounting Pkg – 35 35 –600134 19-V AMS Mounting Kit 35 – – –060134 19 Device Mounting Screws (Pkg of 6) 3.50 – – –650335 Exit Alarm PCB Assy 244.00 – – –600164 19 Exit Alarm Mounting Kit 9.50 – – –650265 Exit Alarm Label 9.50 – – –600146 CD/EA Cylinder Retainer Brkt 10.00 – – –3722 Strike ASA Filler Plate 11 – – –060135 571579/565/2126A Screws (Pkg of 10) 3.50 – – –

(F) 19-V Surface Vertical Rod and Latches SP28Part No. Description Unfinished SP313 US32D Black

650389 19-V Top Latch Case (Latch cover sold separately) 102 – – –650388 19-V Latch Case Cover Kit (w/Screws) – – – 31650337 19-V Latch Cover Mounting Pkg 5.50 – – –650386 Rod Guide Kit (w/Screws) – – – 10.50610045 Bottom Bolt Assembly 35 – – –650387 Bottom Bolt Guide (Latch cover sold separately) 8.50 – – –4286 19 Top Rod – 61 69 –4288 19 Bottom Rod – 61 69 –5494 F-19-V Auxiliary Fire Latch Kit (LBR application only) 343 – – –

24 Device Series - Parts

59

(F) 24 Exit DevicesUS10 US4

Part No. Description Unfinished US28 US32D 313AN US26D US26 US32 US3650233 24-R Center Case Kit 304 – – – – – – –

650234 F-24-R Center Case Kit 478 – – – – – – –

650236 (F) 24-V Center Case Kit 200 – – – – – – –

650238 (F) 24-C Center Case Kit 191 – – – – – – –

650247 24-R Center Case Cover Kit – 98 122 103 120 124 127 134

650249 F-24-R Center Case Cover Kit – 98 122 103 120 124 127 134

650251 (F) 24-V Center Case Cover Kit – 98 122 103 120 124 127 134

650253 (F) 24-C Center Case Cover Kit – 98 122 103 120 124 127 134

600307 24 Series Center Case Cover Mtg Pkg – 7.50 7.50 7.50 7.50 7.50 7.50 7.50

661408 24 Push Bar Channel 3' Door – 63 79 68 77 80 82 87


650121 F-24 Channel Cover Plate 3' – 32 32 32 32 32 32 32


650117 24 CD Channel Cover Plate 3' – 38 38 38 38 38 38 38


650131 24 EA Channel Cover Plate 3' – 60 60 60 60 60 60 60


650139 24 KOR Channel Cover Plate 3' – 47 47 47 47 47 47 47


650187 24 Hex Dogging Kit 3' – 51 51 51 51 51 51 51

650188 24 Hex Dogging Kit 4' – 56 56 56 56 56 56 56

610480 24 Panic Dogging Housing 14 – – – – – – –

060109 24 Hex Dogging Key 7/32" (Pkg of 10) 12.50 – – – – – – –

650294 24 Channel End Cap Kit 1-3/4" Door – 25 31 27 30 32 32 34


600305 24 Series Channel Screw (Pkg of 10) 11.50 – – – – – – –

600310 24 Series Push Bar End Cap Kit – 27 33 28 32 33 34 36

600319 24 Series Push Bar Guide Pkg 9 – – – – – – –

650324 (F) 24-R Mounting Pkg 1-3/4" Door 23 – – – – – – –

650302 (F) 24-R Mounting Pkg 2-1/4" Door 23 – – – – – – –

650304 24-V Mounting Pkg 1-3/4" - 2-1/4" Door 35 – – – – – – –

650325 F-24-V Mounting Pkg 1-3/4" Door 35 – – – – – – –


650318 24-C Mounting Pkg 1-3/4" Door 23 – – – – – – –


650317 F-24-C Mounting Pkg 1-3/4" Door 23 – – – – – – –


650326 24-CWDC Mounting Pkg 1-3/4" Door – – 49 49 – 49 49 49

650298 24-CWDC Mounting Pkg 2-1/4" Door – – 49 49 – 49 49 49

650327 F-24-CWDC Mounting Pkg 1-3/4" Door 49 – – – – – – –

060111 Cotter Key 1/8" x 1" (Package of 10) 10.50 – – – – – – –

600146 CD/EA Cylinder Retainer Bracket 10 – – – – – – –

650265 Exit Alarm Label 9.50 – – – – – – –

600320 EL Solenoid Pkg 144 – – – – – – –

600321 EL Plunger Solenoid Pkg 54 – – – – – – –

110388 EL Cable Assy 31 – – – – – – –

650203 RX Switch Replacement Kit 125 – – – – – – –

650210 LM Switch Replacement Kit 203 – – – – – – –

650264 DM Switch Replacement Kit 203 – – – – – – –





Parts - Device Series 24(F) 24 Exit Devices - Latches and Rods US3

SP313 US26 US4Part No. Description Unfinished SP28 US32D US26D US32 US10650389 24-V Top Latch Case 102 – – – – –

650375 F-24-V Top Latch Case 102 – – – – –

650202 24-V Latch Case Cover Kit – 55 55 70 70 70

650336 24-V Latch Case Cover Mounting Pkg – – 5.50 – – 5.50

650311 24-V Rod Guide Kit – 43 43 – 53 40

650387 24-V Bottom Bolt Guide (Latch cover sold separately) 8.50 – – – – –

4450 24-V Top Rod Kit – 70 70 70 70 70

610056 24-V Bottom Rod Kit – 96 96 96 96 96

5494 F-24-V Auxiliary Fire Latch Kit (LBR application only) 343 – – – – –

603L 24-C Top Latch Case - LHR 151 – – – – –

603R 24-C Top Latch Case - RHR 151 – – – – –

F603 24C-CWDC, F-24-C Top Latch Case 225 – – – – –

WF603 F-24-CWDC, Top Latch Case 225 – – – – –

650339 (F) 24-C, CWDC Top Latch Release Kit – 33 33 41 – 28

4567 24-C Bottom Bolt Guide 38 – – – – –

4835 24-CWDC Bottom Bolt Guide 36 – – – – –

4694 F-24-CWDC Latch Bracket 8.50 – – – – –

650351 (F) 24-C, CWDC Center Slide Assy 235 – – – – –

4832 (F) 24-CWDC Center Slide Reinforcement Plate 29 – – – – –

650197 24-C Latch Mounting Bracket 5.50 – – – – –

650198 F24-C Latch Mounting Bracket 6.50 – – – – –

4833 (F) 24-CWDC Reinforcement Plate – – 36 36 36 36

4834 (F) 24-CWDC Reinforcement Plate w/ Access Hole – – 36 36 36 36

600150 LBR Plug 5.50 – – – – –

610061 (F) 24-C, CWDC Top Rod Kit 70 – – – – –

610057 (F) 24-C, CWDC Bottom Rod Kit 96 – – – – –

5494 F-24-C Auxiliary Fire Latch Kit (LBR application only) 343 – – – – –



25 Device Series - Parts (F) 25 Exit Devices

US10 US4Part No. Description Unfinished US28 US32D 313AN US26D US26 US32 US3650239 25-R Center Case Kit 141 – – – – – – –

650240 F-25-R Center Case Kit 152 – – – – – – –

650242 (F) 25-V Center Case Kit 120 – – – – – – –

650244 (F) 25-C, CWDC Center Case Kit 109 – – – – – – –

650246 (F) 25-M Center Case Kit RHR 120 – – – – – – –

650398 (F) 25-M Center Case Kit LHR 120

650255 (F) 25-R Center Case Cover Kit – 102 128 109 126 130 133 140

650257 (F) 25-V Center Case Cover Kit – 102 128 109 126 130 133 140

650259 (F) 25-C, M Center Case Cover Kit – 102 128 109 126 130 133 140

600307 25 Series Center Case Cover Mtg Pkg – 7.50 7.50 7.50 7.50 7.50 7.50 7.50

650261 25-V/M/C Center Case Housing Kit 16 – – – – – – –

600308 25-V/M/C Center Case Housing Screw Pkg 7 – – – – – – –

650262 25-V Center Case Finger Kit 30 – – – – – – –

650263 25-C Center Case Finger Kit 20

600309 25-V/C Center Case Finger Screw Pkg 8 – – – – – – –

650378 25-M Center Case Slide Bar Assy RHR 62 – – – – – – –

650377 25-M Center Case Slide Bar Assy LHR 62 – – – – – – –

650379 DM/LM 25-M Slide Bar LHR 68 – – – – – – –

650380 DM/LM 25-M Slide Bar RHR 68 – – – – – – –











650191 25 Series Hex Dogging Kit 3' – 51 51 51 51 51 51 51

650192 25 Series Hex Dogging Kit 4' – 56 56 56 56 56 56 56

610480 25 Dogging Housing 14 – – – – – – –

060109 25 Hex Dogging Key 7/32" (Pkg of 10) 12.50 – – – – – – –



600305 25 Series Channel Screw (Pkg of 10) 11.50 – – – – – – –

600310 25 Series Push Bar End Cap Kit – 27 33 28 32 33 34 36

600319 25 Series Push Bar Guide Pkg 9 – – – – – – –

650345 (F) 25-R/M Mounting Pkg 1-3/4" Door 16 – – – – – – –

650293 (F) 25-R/M Mounting Pkg 2-1/4" Door 16 – – – – – – –

650315 25-V Mounting Pkg 1-3/4" - 2-1/4" Door 35 – – – – – – –







650299 (F) 25-CWDC Mounting Pkg 1-3/4" Door – – 49 49 – 49 49 49

650296 (F) 25-CWDC Mounting Pkg 2-1/4" Door – – 49 49 – 49 49 49

060111 Cotter Key 1/8" x 1" (Package of 10) 10.50 – – – – – – –



Parts - Device Series 25(F) 25 Exit Devices US3

SP313 US26 US4Part No. Description Unfinished SP28 US32D US26D US32 US10600146 CD/EA Cylinder Retainer Bracket 10 – – – – –650265 Exit Alarm Label 9.50 – – – – –600320 EL Solenoid Pkg 144 – – – – –600321 EL Plunger Solenoid Pkg 54 – – – – –110388 EL Cable Assy 31 – – – – –650203 RX Switch Replacement Kit 125 – – – – –650210 LM Switch Replacement Kit 203 – – – – –650264 DM Switch Replacement Kit 203 – – – – –

(F) 25 Exit Devices - Latches and Rods US3SP313 US26 US4

Part No. Description Unfinished SP28 US32D US26D US32 US10650389 25-V Top Latch Case 102 – – – – –650375 F-25-V Top Latch Case 102 – – – – –650202 25-V Latch Case Cover Kit – 55 55 70 70 70650336 25-V Latch Case Cover Mounting Pkg – 2.50 2.50 2.50 2.50 2.50

650311 25-V Rod Guide Kit – – 43 – 53 40650387 25-V Bottom Bolt Guide (Latch cover sold separately) 8.50 – – – – –3777 25-V Top Rod Kit – 70 70 70 70 70610055 25-V Bottom Rod Kit – 96 96 96 96 965494 F-25-V Auxiliary Fire Latch Kit (LBR application only) 343 – – – – –

603L 25-C Top Latch Case - LHR 151 – – – – –603R 24-C Top Latch Case - RHR 151 – – – – –

F603 25C-CWDC, F-25-C Top Latch Case 225 – – – – –WF603 F-25-CWDC Top Latch Case 225 – – – – –650339 (F) 25-C, CWDC Top Latch Release Kit – 33 33 41 – 28

4567 25-C Bottom Bolt Guide 38 – – – – –4835 25-CWDC Bottom Bolt Guide 36 – – – – –4694 F-25-CWDC Latch Bracket 8.50 – – – – –650376 (F) 25-C, CWDC Center Slide Assy 235 – – – – –4832 (F) 25-CWDC Center Slide Reinforcement Plate 29 – – – – –650197 25-C Latch Mounting Bracket 5.50 – – – – –650198 F25-C Latch Mounting Bracket 6.50 – – – – –4833 (F) 25-CWDC Reinforcement Plate – – 36 36 36 364834 (F) 25-CWDC Reinforcement Plate w/Access Hole – – 36 36 36 36600150 LBR Plug 5.50 – – – – –

– – – – –610061 (F) 25-C, CWDC Top Rod Kit 70 – – – – –610057 (F) 25-C, CWDC Bottom Rod Kit 96 – – – – –5494 F-25-C Auxiliary Fire Latch Kit (LBR application only) 343 – – – – –



XX Device Series - Parts (F) XX Exit Devices US3

US4 US10B US26Part No. Description Unfinished US10 US32D US26D US32585 XX-R-EO/TP Center Case 241 – – – –

685 F-XX-R-EO/TP Center Case 389 – – – –

610262 XX-R-K/L Center Case 203 – – – –

587 XX-V-EO Center Case 161 – – – –

687 F-XX-V-EO Center Case 264 – – – –

582 XX-V-K/L Center Case 201 – – – –

FE582 FSE-XX-V-K/L Center Case 489 – – – –

F582 F-XX-V-K/L Center Case 307 – – – –

583 XX-V-TP Center Case 198 – – – –

F583 F-XX-V-TP Center Case 318 – – – –

591 XX-C Center Case 197 – – – –

691 F-XX-C Center Case 501 – – – –

650145 XX-M Center Case LHR 272 – – – –

650146 XX-M Center Case RHR 272 – – – –

650149 F-XX-M Center Case LHR 272 – – – –

650150 F-XX-M Center Case RHR 272 – – – –

3740 XX-R Center Case Cover – 66 79 94 94

3742 XX-V Center Case Cover – 66 79 94 94

3741 XX-M/C Center Case Cover – 66 79 94 94

650381 XX-M Slide Bar Assy LHR 47 – – – –

650382 XX-M Slide Bar Assy RHR 47 – – – –

661180 XX-R Latch Bolt Assy 57 – – – –

607 XX-R Latch Bolt Assembly 57 – – – –

610044 XX-M/V/C Axle Support Housing Assy 63 – – – –

3566 XX-V Locking Cam 8.50 – – – –

3755 XX-R Knob Cam 30 – – – –

3762 Locking Cam 6.50 – – – –

3754 XX-R NL Cam 2.50 – – – –

610221 XX-V NL Cam 30 – – – –

3775 XX-V Knob Cam 30 – – – –

3770 XX-R Main Cam Spring 5.50 – – – –

610070 XX-R Back Plate 69 – – – –

584 XX Series End Case 135 – – – –

684 F-XX Series End Case 231 – – – –

3746 XX Series Lever Arm RH – 50 57 69 69

3747 XX Series Lever Arm LH – 50 57 69 69

3749 XX Series Lever Arm Axle 9.50 – – – –

3767 XX Series Crossbar – 81 81 81 81

660025 1/4-20 Crossbar Retaining Screw 4.50 – – – –

060109 Hex Dogging Key 7/32" (Pkg of 10) 12.50 – – – –

060111 Cotter Key 1/8" x 1" (Package of 10) 10.50 – – – –



Parts - Series Devices XX (F) XX Exit Devices US3

US4 US10B US26Part No. Description Unfinished US10 US32D US26D US32650113 XX-R Mounting Package 23 – – – –

650133 F-XX-R Mounting Package 23 – – – –

650332 XX-V Mounting Package 35 – – – –

650134 F-XX-V Mounting Package 35 – – – –

650318 XX-C Mounting Package 23 – – – –

650317 F-XX-C Mounting Package 23 – – – –

650301 F-XX-C-WDC Mounting Package 49 – – – –

650299 XX-C-WDC Mounting Package – 49 49 – 49

650137 XX-M Mounting Package 43 – – – –

650138 F-XX-M Mounting Package 43 – – – –

650141 XX-R AMS Mounting Package 23 – – – –

650333 XX-V AMS Mounting Package 35 – – – –

650323 XX-C AMS Mounting Package 23 – – – –

650142 XX-M AMS Mounting Package 43 – – – –

F) XX Exit Devices - Latches and Rods US3US4 US10B US26

Part No. Description Unfinished US10 US32D US26D US32650389 XX-V Top Latch Case 102 – – – –650375 F-XX-V Top Latch Case 102 – – – –650202 XX-V Latch Case Cover Kit – 70 55 – 70650336 XX-V Latch Case Cover Mounting Pkg – 5.50 5.50 – –650311 XX-V Rod Guide Kit – 40 43 – 53650387 XX-V Bottom Bolt Guide (Latch cover sold separately) 8.50 – – – –3777 XX-V Top Rod Kit – 70 70 – 70610055 XX-V Bottom Rod Kit – 96 96 – 965494 F-XX-V Auxiliary Fire Latch Kit (LBR application only) 343 – – – –

603L XX-C Top Latch Case LHR 151 – – – –603R XX-C Top Latch Case RHR 151 – – – –F603 F-XX-C, CWDC Top Latch Case 225 – – – –WF603 F-XX-C-CWDC Top Latch Case 225 – – – –650339 XX-C Top Latch Release Sub Assembly – 28 33 41 28

4567 XX-C Bottom Bolt Guide 38 – – – –4835 XX-CWDC Bottom Bolt Guide 36 – – – –4694 XX-CWDC Latch Bracket 9 – – – –610037 XX-C Center Slide Assy 235 – – – –4832 XX-CWDC Center Slide Reinforcement Plate 29 – – – –650197 XX-C Latch Mounting Bracket 5.50 – – – –650198 F-XX-C Latch Mounting Bracket 6.50 – – – –4833 (F) XX-CWDC Reinforcement Plate – 36 36 36 364834 (F) XX-CWDC Reinforcement Plate w/ Access Hole – 36 36 36 36

610061 (F) XX-C Top Rod Kit 70 – – – –610057 (F) XX-C, CWDC Bottom Rod Kit 96 – – – –5494 F-XX-V Auxiliary Fire Latch Kit (LBR application only) 343 – – – –



8500 Mortise Lock - Parts 8500 Mortise Lock US4 US3, US26Part No. Description Unfinished US10B US10 US26D3515 Lock Face Plate – 52 47 713516 T-Lift Spring 5.50 – – –3518 Dead Lock Arm Spring 5.50 – – –3519 Knob Cam 30 – – –3521 Actuator Arm 7.50 – – –3522 Main Lift 7.50 – – –3529 Auxiliary Bolt 7.50 – – –3530 Auxiliary Bolt Actuator 29 – – –650306 Auxiliary Bolt Spring 5.50 – – –650310 Deadlocking Arm 29 – – –3542 Cylinder Operating Arm 29 – – –4025 Cylinder Screw Retainer 3.50 – – –4067 Locking Arm 31 – – –610042 Locking Arm and Spring Assembly 32 – – –610041 Latch Bolt Assembly 57 – – –

Mullion - Parts MullionPart No. Description Unfinished060106 Top Fittings for 4023 Mullion 53

060102 Bottom Fittings for 4023 Mullion 53

060104 Top Fittings for 2923 Mullion 47


060107 Top Fittings for 4423 Mullion 74


4988 Cylinder Removable Mullion Adjustment Shim (1/8" Thick) 29

4965 Cylinder Removable Mullion Top Fitting 78

060103 Stabilizer Blocks with Mounting Screws Pkg/4 31

4966 KR Cylinder Retainer Bracket 8.50

060101 KR Mullion Mounting Kit 18

19 Trim Series - Parts 19 Series TrimPart No. Description Unfinished600314 910TP/911K/912L Cylinder Nut 5.50600166 918NL Cylinder Mounting Pkg 5.504218 912L Washer 3.504268 911K/912L Locking Plate 144270 900 Series Hex Stud 3.504275 912L Spring Plate 144326 912L Lever Spring 3600315 920/930 Cylinder Anchor 14600161 911/912/914 Tailpiece Guide Pkg 6.504841 912L Lever Return Spring 5.50050526 900 Series, Cylinder Nut 9650314 K/L Locking Plate 13.50650319 912L Series Lever Actuator Spring 5650321 911K Series Knob Actuator Spring 5610196 910/911/912 Actuator Shaft Assembly 23◆ For Trims Shipped before 02/28/2011● For Trims Shipped after 02/28/2011

◆

◆

◆

◆

◆

◆

●

●

●

●



Parts - Trim Series 2424 Series Trim

US26D US3Part No. Description Unfinished SP28 SP313 US32D US10 US4 US26

4120 710NL, 718C/NL Cylinder Spacer Collar 5.50 – – – – –4121 710NL, 718C/NL Cylinder Anchor Plate 5.50 – – – – –

● 650371 Tailpiece Package 1-3/4" Door 6 – – – – –● 650372 Tailpiece Package 2-1/4" Door 6 – – – – –

4270 700 Series Trim Hex Stud 3.50 – – – – –4349 718DT/NL Control Hex Stud 3.50 – – – – –4302 712L-DT Lever Plate 14 – – – – –

● 650314 K/L Locking Plate 13.50 – – – – –● 650322 711/712-R/V Retainer Plate 34 – – – – –

4326 712 Lever Spring Clip 3 – – – – –● 650319 Lever Actuator Spring 5 – – – – –● 650321 Knob Actuator Spring 5 – – – – –

650366 TP/K/L Actuator Shaft Assembly 23 – – – – –● 600283 Shear Pin Kit 8 – – – – –

● 600298 711 Knob Assembly – 110 116 137 140 142 151● 050006 712L Dane Lever Kit – 131 131 131 149 131 180● 050003 712L Sutro Lever Kit – 131 131 131 149 131 180● 050017 712L Quantum Lever Kit – 131 131 131 149 131 180● 050007 712L Avalon Lever Kit – 131 131 131 149 131 180

650151 715DT Mounting Package 1-3/4" – – 10.50 10.50 – 10.50 –650152 715DT Mounting Package 2-1/4" – – 10.50 10.50 – 10.50 –650153 717DT Mounting Package 1-3/4" – – 5.50 5.50 – 5.50 –650154 717DT Mounting Package 2-1/4" – – 5.50 5.50 – 5.50 –650181 718DT Mounting Package 1-3/4" – – 5.50 5.50 – 5.50 –650182 718DT Mounting Package 2-1/4" – – 5.50 5.50 – 5.50 –650169 718C/NL-R/V Mounting Package 1-3/4" – – 10.50 10.50 – 10.50 –650170 718C/NL-R/V Mounting Package 2-1/4" – – 10.50 10.50 – 10.50 –

● 650367 718NL-C Mounting Package 1-3/4" Door – – 23 23 – 23 –● 650368 718NL-C Mounting Package 2-1/4" Door – – 23 23 – 23 –● 650369 718C-C Mounting Package 1-3/4" Door – – 23 23 – 23 –● 650370 718C-C Mounting Package 2-1/4" Door – – 23 23 – 23 –

650189 711/712/719 Mounting Package 1-3/4" 5.50 – – – – – –650190 711/712/719 Mounting Package 2-1/4" 5.50 – – – – – –600288 711/712/719 Pull Grip Screw Pkg 2.50 – – – – – –

● For Trims Shipped after 02/28/2011



24 Trim Series - Parts 24 Series Trim

SP28 US26D US10 US4Part No. Description Unfinished SP313 US32D US26 US32 US3

◆ 4131 718C/NL Cylinder Retaining Bracket 6.50 – – – – –◆ 4218 712 Lever Washer 3.50 – – – – –◆ 4268 TP/K/L/TL Locking Plate 14 – – – – –◆ 4275 712 Spring Plate 14 – – – – –◆ 4605 710/711/712/719 Control Actuator Spring 2 – – – – –◆ 4841 712 Lever Return Spring 5.50 – – – – –◆ 600267 719 Rod Member Pkg – 52 52 52 52 52◆ 610119 711 Knob Assembly – 63 63 63 63 63◆ 650355 712 Dane Lever – 72 72 72 72 72◆ 650356 712 Sutro Lever – 72 72 72 72 72◆ 650358 712 Quantum Lever – 72 72 72 72 72◆ 650313 710TP Retainer Clip 29 – – – – –◆ 650312 711/712-R/V Retainer Plate 35 – – – – –◆ 610205 711/712-C Retainer Plate 1-3/4" 35 – – – – –◆ 610464 711/712-C Retainer Plate 2-1/4" 35 – – – – –◆ 060124 711/712/719 3/8" - 16 Locknut (Package of 10) 4.50 – – – – –◆ 660471 TP/K/L/TL Solid Rivet 2.00 – – – – –◆ 650157 710DT Mounting Package 1-3/4" – 5.50 5.50 – 5.50 –◆ 650158 710DT Mounting Package 2-1/4" – 5.50 5.50 – 5.50 –◆ 650161 710NL Mounting Package 1-3/4" – 17 17 – 17 –◆ 650162 710NL Mounting Package 2-1/4" – 17 17 – 17 –◆ 650165 710TP Mounting Package 1-3/4" – 10.50 10.50 – 10.50 –◆ 650166 710TP Mounting Package 2-1/4" – 10.50 10.50 – 10.50 –◆ 650173 718NL-C Mounting Package 1-3/4" – 23 23 – 23 –◆ 650174 718NL-C Mounting Package 2-1/4" – 23 23 – 23 –◆ 650177 718C-CV Mounting Package 1-3/4" – 23 23 – 23 –◆ 650178 718C-CV Mounting Package 2-1/4" – 23 23 – 23 –◆ 650185 718TP Mounting Package 1-3/4" – 5.50 5.50 – 5.50 –◆ 650186 718TP Mounting Package 2-1/4" – 5.50 5.50 – 5.50 –◆ 650193 719TP Mounting Package 1-3/4" – 10.50 10.50 – 10.50 –◆ 650194 719TP Mounting Package 2-1/4" – 10.50 10.50 – 10.50 –

◆ For Trims shipped before 02/25/2011



Parts - Trim Series 2525 Series Trim

US26D US4 US3Part No. Description Unfinished SP28 SP313 US32D US10 US32 US26600272 510 Backplate Assembly 21 – – – – – –

600273 510/512/513 Slider 61 – – – – – –

600282 511L Slider Assy 139 – – – – – –

090041 Hook Spring Pkg 6.50 – – – – – –

600274 510/511L Spring (Package of 2) 16 – – – – – –

600284 512TP/513K Spring (Package of 2) 9.50 – – – – – –

600275 510L/512TP/513K Locking Hook 21 – – – – – –

600281 510L-NL/512NL/513K-NL Cam 24 – – – – – –

600276 L/K Spindle Cam Kit 24 – – – – – –

600280 L-NL/L-DT Spindle Cam Kit 26 – – – – – –

600277 510/511/513 Spindle Cam Retaining Ring (Pkg of 10) 2.50 – – – – – –

650267 510L/513K Shear Pin (Package of 10) 19 – – – – – –

600283 511L Shear Pin (Package of 5) 8 – – – – – –

600278 500 Series Cylinder Lock Nut 9 – – – – – –

600279 500 Series Cylinder Nut Tool 15 – – – – – –

600296 500 Series Security Collar – 19 20 23 23 24 25

600289 Lower Pull Bracket Kit 1.3/4" – – 10.50 12.50 – 12.50 –

600290 Lower Pull Bracket Kit 2.1/4" – – 10.50 12.50 – 12.50 –

600285 512TP Thumbpiece – 28 30 35 36 36 38

600286 512TP Thumbpiece Pivot Pin 6.50 – – – – – –

600287 512TP Thumbpiece Bracket 10.50 – – – – – –

600297 512TP Pull – 111 118 138 141 144 152

600298 513K Knob Assy – 110 116 137 140 142 151

050006 510L Dane Lever Kit – 131 131 131 149 131 180

050003 510L Sutro Lever Kit – 131 131 131 149 131 180

050017 510L Quantum Lever Kit – 131 131 131 149 131 180

050007 510L Avalon Lever Kit – 131 131 131 149 131 180

600288 Pull Grip Screw (Package of 10) 2.50 – – – – – –

650231 512 Mounting Pkg 1-3/4" – – 3.50 3.50 – 6.50 –

650232 512 Mounting Pkg 2-1/4" – – 3.50 3.50 – 6.50 –

650235 510/511/512/513 Screw Pkg 1-3/4" 2.50 – – – – – –

650237 510/511/512/513 Screw Pkg 2-1/4" 2.50 – – – – – –

600293 FSA/FSE Solenoid Kit 116 – – – – – –

600294 FSA/FSE Solenoid Plunger 17 – – – – – –

600295 FSA/FSE Pivot Pin 2 – – – – – –

650278 FSA/FSE Solenoid Spring 4.50 – – – – – –



Part No. Description List Price650277 24/25 Maintenance Kit 1565

Refill Parts/Packages Refill New KitList Price Contents

Part No. Description Each Qty299 Strike 299 Strike US19 45 5

325 SNB 325 Sex Bolt, 1/4-20 US32D (Package of 2) 16 10

425 SNB 425 Sex Bolt, 10-24 US32D (Package of 2) 16 10

600314 Cylinder Nut 3.50 10

4208 CD/EA/KOR Cylinder Retaining Bracket 5.50 30

060126 512/718 Lever Washer (Package of 10) 5.50 1

4275 712 Spring Plate 14.00 10

4326 712/912 Lever Spring Clip 3 10

4841 712/912 Lever Return Spring 5.50 10

650311 Rod Guide Kit US32D 43 6

650311 Rod Guide Kit SP28 43 2

650311 Rod Guide Kit SP313 43 2

060109 Hex Dogging Key 7/32" (Package of 10) 12.50 1

650231 512 Mtg Pkg US4 1-3/4" Dr 6.50 2

650231 512 Mtg Pkg US10B 1-3/4" Dr 2.50 2

650231 512 Mtg Pkg US26D 1-3/4" Dr 2.50 6

650294 24/25 End Cap Kit US32D 1-3/4" Dr. 31 6

650294 24/25 End Cap Kit US26D 1-3/4" Dr. 30 2

650294 24/25 End Cap Kit SP28 1-3/4" Dr. 25 1

650294 24/25 End Cap Kit SP313 1-3/4" Dr. 27 1

600283 511 Trim Shear Pin (Package of 5) 8 6

640001 24 Device Plastic Mounting Template 2.50 2

640002 25 Device Plastic Mounting Template 2.50 2

650267 510/513 Trim Shear Pin (Package of 10) 19 3

060112 8500 Lock Housing Screws (Package of 10) 4.50 2

060113 24/25-C Latch Screw (Package of 10) 4.50 5

060114 Rod Guide Screws (Package of 10) 4.50 3

060119 510/511/512/513 Back Plate Screws (Package of 10) 4.50 5

600309 25 Lift Finger Screws (Package of 2) 8 10

600173 8500 Lock Face Screws US3/US4/US10 3 10

600173 8500 Lock Face Screws US26D/US32D 3 10

600173 8500 Lock Face Screws US10B 3 10

060120 8500 Lock Backplate Screws (Package of 10) 4.50 5

060121 24/25-V Latch Cover Screws US26D/US32D/US28 (Package of 10) 4.50 5

060121 24/25-V Latch Cover Screws US3/US4/US10 (Package of 10) 4.50 5

060121 24/25-V Latch Cover Screws US10B (Package of 10) 4.50 5

060123 Electric Option Dogging Screw (Package of 10) 4.50 5

060122 K-NL/L-NL Spindle Cam Screw (Package of 10) 9 2

060124 K/L/TL Trim Lock Nut (Package of 10) 4.50 1

600305 24/25 Channel Screw (Package of 10) 11.50 3

060111 Cotter Key 1/8" x 1" (Package of 10) 10.50 5

600279 Cylinder Nut Tool (package of 5) 15 2

060125 FSE/FSE Trim Pivot Pin (Package of 10) 4.50 2

600319 24/25 Pushbar Guide (Package of 2) 9 10

600278 25 Trim Cylinder Locknut 9 10

◆ For Trims shipped before 02/25/2011

Parts Maintenance Kit

◆

◆

◆

◆



(continued) Parts Maintenance Kit

Refill Parts/Packages Refill New KitList Price Contents

Part No. Description Each Qty060117 25 Center Case Mtg Screws (Package of 10) 4.50 5

060118 24 Center Case Housing Screws (Package of 10) 4.50 5

060116 25-R/M Device Mounting Screws (Package of 10) 5.50 5

060115 FSA/FSE Trim Screws (Package of 10) 4.50 5

600307 24/25 Center Case Cover Screws US3 (Package of 4) 7.50 12



600307 24/25 Center Case Cover Screws 31AN (Package of 4) 7.50 12

600307 24/25 Center Case Cover Screws US26D/US32D/SP28 (Package of 4) 7.50 12

600277 510/513 Spindle Cam Ret. Ring (Package of 10) 2.50 2

600308 25 Housing Plate Screws (Package of 2) 7 2

970321 299 Strike Shim 8 20



Numerical IndexPart No. Page

582 63583 63584 63585 63587 63

591 63603L 60,62,64603R 60,62,64607 63684 63

685 63687 63691 633515 653516 65

3518 653519 653521 653522 653529 65

3530 653542 653566 633722 583740 63

3741 633742 633746 633747 633749 63

3754 633755 633762 633767 633770 63

3775 633777 62,644025 654067 654107 58

4108 58,694120 664121 664131 674218 65,67

Part No. Page

4268 65,674270 65,664275 65,67,694286 584288 58

4302 664326 65,66,694349 664450 604567 60,62,64

4605 674694 60,62,644832 60,62,644833 60,62,644834 60,62,64

4835 60,62,644841 65,67,694965 654966 654988 65

5494 58,60,62,64110388 59600134 58600146 59600150 60,62

600161 65600166 65600173 69600267 67,68600272 68

600273 68600274 68600275 68600276 68600277 68,69

600278 68,69600279 68,69600280 68600281 68600282 68

600283 66,68,69600284 68600285 68600286 68600287 68

Part No. Page

600288 66,68600289 68600290 68600296 68600297 68

600298 66,68600305 59,61,69600307 59,61,69600308 61,69600309 61,69

600310 59,61600314 65,69600315 65600319 59.61.69600320 59

600321 59610037 64610041 65610042 65610044 63

610045 58610055 62,64610056 60610057 60,62,64610061 60,62,64

610070 63610119 67610196 65610205 67610221 63

610464 67610480 58,59,61640001 69640002 69650113 64

650116 59650117 59650119 61650120 61650121 59

650122 59650131 59650132 59650133 64650134 64

Part No. Page

6650135 61650136 61650137 64650138 64650139 59

650140 59650141 64650142 64650143 61650144 61

650145 63650146 63650149 63650150 63650151 66

650152 66650153 66650154 66650157 67650158 67

650161 67650162 67650165 67650166 67650169 66

650170 66650173 67650174 67650177 67650178 67

650181 66650182 66650185 67650186 67650187 59

650188 59650189 66650190 66650191 61650192 61

650193 67650194 67650197 60,62,64650198 60,62,64650201 59



Numerical IndexPart No. Page

650202 60,62,64650203 59650210 59650227 61650228 61

650231 68,69650232 68650233 59650234 59650235 68

650236 59650237 68650238 59650239 61650240 61

650242 61650244 61650246 61650247 59650249 59

650251 59650253 59650255 61650257 61650259 61

650261 61650262 61650263 61650264 59,60,66650265 59

650267 69650277 69650278 68650293 61,68650294 59,61,68,69

650295 61,68650296 61650297 58650298 59650299 61,64

650300 59,61650301 64650302 59650304 59650306 65

Part No. Page

650307 58650308 58650309 58650310 65650311 60,62,64,69

650312 67650313 67650314 65,66650315 61650316 61

650317 59,61,64650318 59,61,64650319 65,66650320 58650321 65,66

650322 66650323 64650324 59650325 59650326 59

650327 59650328 58650329 58650330 58650331 58

650332 64650333 64650334 58650336 60,62,64650337 58

650338 58650339 60,62,64650343 58650345 61650346 59,61

650348 59,61650351 60650355 67650356 67650358 67

650366 66650367 66650368 66650369 66650370 66

Part No. Page

650371 66650372 66650374 58650375 60,62,64650376 62

650377 61650378 61650379 61650380 61650381 63

650382 63650384 58650385 58650386 58650387 58,60,62,64

650388 58650389 58,60,62,64650390 58650391 58650392 58

650393 58650398 61660025 63660471 67661180 63

661408 59661409 59661412 61661413 61050003 66,68

050006 66,68050007 66,68050017 66,68050526 65060101 65

060102 65060103 65060104 65060105 65060106 65

060107 65060108 6506010958,59,61,63,69060110 58060111 58,61,63,69

Part No. Page

060112 69060113 69060114 69060115 70060116 70

060117 70060118 70060119 69060120 69060121 69

060122 69060123 69060124 67,69060125 69060126 69

090041 68F582 63F583 63F603 60,62,64FE582 63

WF603 60,62,64



Notes

1



Phone: 877-671-7011 (Press 1, then 6) • FAX: 1-800-288-4242email: [email protected]

Table of ContentsDevices1990 Series .............................................................................32090 Series .............................................................................41490 Series .............................................................................51590 Series .............................................................................61690 Series .............................................................................71790 Series .............................................................................82390 Series .............................................................................9Power Supply, Electric Power Transfer.................................10Lever Control, Offset Pull, Cylinders.....................................11Cylinder Assemblies/Retractors/Risers ................................11Mullions/Strikes.....................................................................12

Parts1990 Series......................................................................13-15Crossbar Devices..................................................................162090 Series......................................................................17-201490/1590 Series............................................................ 21-24EL1490/1590 Series ........................................................25-261490 Series Rod Assembly...................................................271490/1590 Series Cylinder Assembly ...................................281690 Series......................................................................29-311790 Series......................................................................32-332390 Series......................................................................34-362390 Series Cylinder Assembly ............................................37Strike/Mullion/Trim ................................................................37

IndexIndex by Model Number .......................................................39Index by Part Number .....................................................40-41

Finish ListU.S. Standard BHMA Description

US28 628 Anodized Aluminum – ClearDC13 710 Anodized Aluminum – Dark Bronze DC35 711 Anodized Aluminum – BlackP28 689 Painted Aluminum – SilverP13 695 Painted Aluminum – Dark BronzeP35 622 Painted Aluminum – BlackUS3 666 Bright BrassUS4 667 Satin BrassUS9 705 Bright BronzeUS10 668 Satin BronzeUS10B 703 Oxidized Satin BronzeUS14 669 Bright NickelUS15 670 Satin NickelUS26 672 Bright ChromeUS26D 702 Satin Chrome

Consult factory for availability of other finishes.

Please refer to IRFASTTRACK Price Book for products available in 24-hours or 5-days.

1-877-671-7011 (Press 1, then 6)Fax: 1-800-288-4242Email: [email protected]

2

Prices subject to change without noticePhone: 877-671-7011 (Press 1, then 6) • FAX: 1-800-288-4242

email: [email protected]



Phone: 877-671-7011 (Press 1, then 6) • FAX: 1-800-288-4242email: [email protected] Prices subject to change without notice

1990 SeriesDevices are priced for 3´8˝ x 7´, Aluminum or Hollow Metal Doors.Hex Bottom Latch furnished standard.(Price includes PB48 Strike)

P13, US3, US4, US26, US14,Model No. P28 P35 US10 US10B US26D US15 Standard Trim

1990EO 409 421 949 1031 1031 1371 –1991DT 561 573 1236 1328 1377 1717 9970 Pull1992NL-OP/HB-OP 453 465 993 1075 1075 1415 Rim Cylinder only1993NL/HB 605 617 1280 1372 1421 1761 9970 w/Rim Cylinder

Optional LatchesSuffix List Add

RL Rod Bottom Latch 24PL Pullman Bottom Latch 25ES Top Latch for use with Electric Strikes 29

(Device Furnished LBR - Less Bottom Rod - Less Strike, Deduct $19.00 List)

Door Heights over 7'List Add

Up to 8' 55Up to 9' 72Up to 10' 83

CrossbarCrossbar furnished 41" standard - Easily Cut for Job Fitting List Add

Extra Length Crossbar - 48" (Fits Door Width up to 51") - P28, P13, P35 finishes 16Extra Length Crossbar - 48" (Fits Door Width up to 51") - Architectural finishes 26Less Crossbar (Deduct) 105

REFERENCE NOTES:Specify if Door Material other than Aluminum. Not recommended for use on wood doors.

Concealed Vertical RodCrossbar Exit Devices

4




Rim TypeCrossbar Exit Devices

2090 SeriesDevices are priced for 3'8", Aluminum or Hollow Metal Doors.(Price includes SD36 Strike)

Handed - Not Reversible

P13, US3, US4, US26, US14,Model No. P28 P35 US10 US10B US26D US15 Standard Trim

2090EO 347 361 890 965 965 1271 –2091DT 499 513 1177 1262 1311 1617 9970 Pull2092NL-OP/HB-OP 391 405 934 1009 1009 1315 Rim Cylinder only2093NL/HB 543 557 1221 1306 1355 1661 9970 w/Rim Cylinder

CrossbarCrossbar furnished 41" standard - Easily Cut for Job Fitting List Add

Extra Length Crossbar - 48" (Fits Door Width up to 51") - P28, P13, P35 Finishes 16Extra Length Crossbar - 48" (Fits Door Width up to 51") - Architectural Finishes 26Less Crossbar (Deduct) 105

REFERENCE NOTES:Specify Handing RHR or LHR. Not Reversible.Specify if Door Material other than Aluminum.

Concealed Vertical RodTouchbar Exit Devices



1490 SeriesDevices are priced for 36" x 7',Aluminum or Hollow Metal Doors.RL Bottom Latch furnished standard.(Price includes PB48 Strike.)

▲ ▲ ▲DC13, US3, US4, US14,

Model No. US28 DC35 US10 US10B US15 Standard Trim

1490EO 693 711 1481 1523 1523 -1491DT 845 863 1768 1820 1869 9970 Pull1492NL-OP 777 795 1565 1607 1607 ★ 149CA-NL

w/Rim Cylinder1493HB-OP 777 795 1565 1607 1607 ★ 149CA-HB

w/Rim Cylinder1494NL-P 929 947 1852 1904 1953 9970 Pull

★ 149CA-NL w/Rim Cylinder

1495HB-P 929 947 1852 1904 1953 9970 Pull ★ 149CA-HB w/Rim Cylinder

1498 485 485 1276 1276 1276 -

REFERENCE NOTES:

Specify Handing RHR or LHR.Specify if Door Material other than Aluminum. Not recommended for use on wood doors.Device furnished RHR standard when handing is not specified. Both RHR and LHR labels are provided.Device size furnished standard 36" for 7' door height if not specified.Cylinders are included in price for NL and HB functions.

▲ Channel extrusion furnished in DC35 for US3, US4, US10, US10B, US14 and US15 finishes.★ Cylinder assembly furnished in DC35 finish, unless specified. Available finishes DC13, US28 & DC35.

PUSH

1490 Device OptionsList Add

Extra Length 42” 1490 Device 3548” 1490 Device 72

Extra Length 42” 1498 Device 1748” 1498 Device 24

Extension Rods For Door Heights over 7' up to 10' 92Door Thickness For Doors greater than 1 3/4" up to 2 1/4" 19

using cylinder assemblyRim Cylinder For Door with cylinder assembly 447 Pin Cylinder Assembly For Door with cylinder assembly and using 7 pin cylinder 19Risers (1/2") Specify device “x Riser” (example 1490EO x 36" x US28 x Riser) 78Centerlines Change from 40 9/16" standard Device Centerline 92HH Hurricane Device. Available up to 8' device only. 16Signal Switch Base Exit Device unit modified with signal switch (SPDT) 347

indicating latch condition. Prefix device "S".Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction 791

and Signal Switch (SPDT). Prefix device "EL".

REFERENCE NOTES:

✹ One PS914 x 900-2RS minimum requirement to power one or two EL devices. See page 10 for power supply requirements and options.

✹


Rim Type Touchbar Exit Devices


1590 SeriesDevices are priced 36",Aluminum or Hollow Metal Doors.(Price includes TD35 Strike. Retractors included with device specified with cylinder operation.)

▲ ▲ ▲DC13, US3, US4, US14,

Model No. US28 DC35 US10 US10B US15 Standard Trim

1590EO 582 603 1373 1412 1412 -1591DT 734 755 1660 1709 1758 9970 Pull1592NL-OP 666 687 1457 1496 1496 ★ 159CA-NL

w/Rim Cylinder1593HB-OP 666 687 1457 1496 1496 ★ 159CA-HB

w/Rim Cylinder1594NL-P 818 839 1744 1793 1842 9970 Pull

★ 159CA-NL w/Rim Cylinder

1595HB-P 818 839 1744 1793 1842 9970 Pull ★ 159CA-HB w/Rim Cylinder

REFERENCE NOTES:

Specify if Door Material other than Aluminum.Device furnished non-handed with RHR and LHR Pushbar labels for field installation.Device size furnished standard 36" if not specified.Cylinders are included in price on NL and HB functions.Specify if used on pair of doors with Mullion.

▲ Channel extrusion furnished in DC35 for US3, US4, US10, US10B, US14 and US15 finishes.★ Cylinder assembly furnished in DC35 finish, unless specified. Available finishes DC13, US28 & DC35.

PUSH

●

●

●

●


Matching Dummy Touchbar Specify 1498 series. Refer to page 5 for pricing. –Extra Length 42" 1590 Device 35

48” 1590 Device 72Door Thickness For Doors greater than 1 3/4" up to 2 1/4" 19

using cylinder assemblyRim Cylinder For Door with cylinder assembly 447 Pin Cylinder Assembly For Door with cylinder assembly and using 7 pin cylinder 19Risers (1/2") Specify device "x Riser" (example 1590EO x 36" x US28 x Riser) 78Signal Switch Base Exit Device unit modified with signal switch (SPDT) 347

indicating latch condition. Prefix device “S”.

Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction 791and Signal Switch (SPDT). Prefix device “EL”.

REFERENCE NOTES:


✹

●


Concealed Vertical RodPushpad Exit Devices



1690 SeriesDevices are priced for 30", 36" x 7', Aluminum or Hollow Metal Doors.Hex Bottom Latch furnished standard.(Price includes PB48 Strike)

DC13,Model No. US28 DC35 US3 US10 US26 US26D Standard Trim

1690EO 419 446 545 525 545 525 –1691DT 571 598 832 812 891 871 9970 Pull1692NL-OP/HB-OP 463 490 589 569 589 569 169CA

w/Rim Cylinder1694NL-P/HB-P 615 642 876 856 935 915 9970 Pull

169CAw/Rim Cylinder

REFERENCE NOTES:

Devices are supplied 36" x 7' standard, if not specified.

Extra LengthList Add

42" 1648" 26


RL Rod Bottom Latch 24PL Pullman Bottom Latch 25ES Top Latch for use with Electric Strikes 29

(Device Furnished LBR - Less Bottom Rod - Less Strike, deduct $20 List)

Less Rods For retrofit of 1990 crossbar device (Deduct) 43

Door Heights over 7'List Add

Up to 8' 55Up to 9' 72Up to 10' 83


RX Switch Base Exit Device unit modified Request to Exit Switch 190monitoring pushpad. Prefix device "RX".

Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction. 510Prefix device "EL".

Electric Dogging Base Exit Device unit modified with Electric Dogging 510Prefix device "ED".

REFERENCE NOTES:


■ For EL1690 Door widths other than the standard size (30˝, 36˝, 42˝ or 48˝), please specify exact door width.

✹ ■

✹ ■

▲ Device must be ordered with EL option. Conversion kits not available.

▲

Rim TypePushpad Exit Devices



1790 SeriesDevices are priced for 30" and 36", Aluminum or Hollow Metal Doors.(Price includes TD35 Strike)

DC13,Model No. US28 DC35 US3 US10 US26 US26D Standard Trim

1790EO 385 411 510 491 510 491 –1791DT 537 563 662 643 662 643 9970 Pull1792NL-OP/HB-OP 429 455 554 535 554 535 179CA

w/Rim Cylinder1794NL-P/HB-P 581 607 706 687 900 687 9970 Pull

179CAw/Rim Cylinder

REFERENCE NOTES:

Devices are supplied 36" x 7' standard, if not specified.

Extra LengthList Add

42" 1648" 26



Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction. 510Prefix device "EL".

Electric Dogging Base Exit Device unit modified with Electric Dogging 510Prefix device "ED".

REFERENCE NOTES:


■ For EL1790 Door widths other than the standard size (30˝, 36˝, 42˝ or 48˝), please specify exact door width.

Lever ControlP28, US3,P13, US10,P35 US32D

179L Lever Control 265 295179L-BE Lever Control, Blank Escutcheon 265 295179L-NL Lever Control, Night Latch 265 295

REFERENCE NOTES:

Trims are handed. Specify handing RHR or LHR.

✹ ■

✹ ■



▲

Concealed Vertical RodMid-Panel Exit Devices



2390 SeriesDevices are priced for 42", 48" x 7', Aluminum Doors.Hex Bottom Latch furnished standard.(Price includes PB48 Strike)

DC13,Device Fits Door DC35,

Model No. Size Opening US28 CHAMPAGNE Standard Trim

2390EO 21" up to 42" 636 654 –2390EO 24" up to 48" 679 697 –2392NL/HB-OP 21" up to 42" 786 804 Mortise Cylinder Assy with Cylinder 2392NL/HB-OP 24" up to 48" 829 847 Mortise Cylinder Assy with Cylinder 2395NL/HB-OP 21" up to 42" 726 744 Mortise Cylinder Assy less Cylinder 2395NL/HB-OP 24" up to 48" 769 787 Mortise Cylinder Assy less Cylinder 2398 Dummy 21" up to 42" 350 371 –2398 Dummy 24" up to 48" 379 400 –REFERENCE NOTES:

Must specify centerline of device.

Optional Cylinder KitList Add

239CA NL/HB Kit Less Cylinder 90231CA NL/HB Kit Less Cylinder w/ Schlage Cam B502-191 933215 Mortise Cylinder 602" Door Kit For Cylinder Operation 34


RL Rod Bottom Latch 24PL Pullman Bottom Latch 25ES Top Latch for use with Electric Strike 29

(Device furnished LBR - Less Bottom Rod - Less Strike, deduct $20 List)

AccessoriesList Add

Long Top Rod For Door Height from 7’ to 8’ 21Top Rod with Extension For Door Height from 8’ to 9’ 72Top Rod with Extension For Door Height from 9’ to 10’ 83Extension Rod Kit For Door Height 7’ to 10’ Field Installation 113Channel with Up to 42 ˝ Door, 37 1/2˝ Channel US28 801/4˝ Glass Stops DC13, DC35, Champagne 90

Up to 48 ˝ Door, 43 1/2˝ Channel US28 84DC13, DC35, Champagne 121

Filler Plate Up to 42 ˝ Door, 16 1/2 ˝ Filler Plate US28 23DC13, DC35, Champagne 25

Up to 48˝ Door, 19 1/2˝ Filler Plate US28 24DC13, DC35, Champagne 26

REFERENCE NOTES:Rod Length requirement varies with device mounting height.



Electric Latch Retraction Base Exit Device unit modified with Electric Latch Retraction. 510Prefix device "EL". See Page 10 for Power Supply Requirements.

■

■

■

■


▲



Power SupplyElectric Power TransferAll PS900 Series power supplies and option boards have been tested and certified to meet UL294.

EL Power SupplyModel No. Description List Price

PS914 4 AMP High Inrush Base List 593

REFERENCE NOTES:When specifying PS914 power supply for use with “EL” Electric Latch Retraction devices, the 2RS board is furnished when board option not specified. One PS914 x 900-2RS minimum requirement to power one or two EL devices.

Option BoardsModel No. Suffix Description List Add

900-2RS x2RS 2 Relay Output (PS914 ONLY) 145900-4R x4R 4 Relay Output 140900-BBK Battery Backup Board and Batteries 200

REFERENCE NOTES:PS914 can have a combination of one or two option boards.For field installation, use model number. Example: 900-2RS.

Power Supply OverviewInstallation has been simplified in the PS900 series of Power Supplies by utilizing a flat mounting design and polarized lockingconnectors for option boards. This new design eliminates the need for racks and side connectors. The flat mounting of theoption boards also provides for easier access to the terminal blocks for connection of electrified devices (such as electrifiedpanic devices, strikes, card readers, etc.) Common to the line of PS900 Series power supplies is a constant output rating at both12v and 24v settings, universal 120 VAC to 240 VAC input, and polarized option board connectors. New fire alarm interfaceboard mounting allows outputs to be configured as switched (power cut) or unswitched (power continues) when signal provided.

Electric Power TransferSP28,

Model No. Description SP313

EPT10 Ten 24 gauge wires. 24VDC 1 ampere. 467

REFERENCE NOTES:▲ Refer to Von Duprin price book for current pricing of these items.

▲

▲

▲




Lever Control

P28, US3,P13, US10,

Model No. P35 US32D

179L Lever Control 265 295179L-BE Lever Control - Blank Escutcheon 265 295179L-NL Lever Control - Night Latch 265 295

REFERENCE NOTES:

Lever Controls are Handed. Specify handing RHR or LHR.

Offset PullCan be used with all devices except 2390 series. DC13, US3, US4, US26,

Model No. US28 DC35 US10 US10B US26D

9970 Pull 152 152 287 297 346

CylindersUS28, US26D,DC13, US4, US10B,

Model No. DC35 US10 315AN

PB8 Rim Cylinder 44 44 -3215 Mortise Cylinder - - 60

Cylinder AssemblyUS28,DC13,

Model No. DC35

149CA-NL Cylinder Assembly Less Cylinder 40149CA-HB Cylinder Assembly Less Cylinder 40159CA-NL Cylinder Assembly Less Cylinder 40159CA-HB Cylinder Assembly Less Cylinder 40169CA Cylinder Assembly Less Cylinder 27179CA Cylinder Assembly Less Cylinder 27239CA Cylinder Assembly Less Cylinder 90231CA Cylinder Assembly Less Cylinder w/ Schlage Cam B502-191 93

REFERENCE NOTES:Door Thickness greater than 1 3/4" up to 2 1/4", add $19 list.7 Pin Cylinder applications, add $19 list.With Cylinder Add $60 list for 2390 and add $44 list for other cylinder assembly.Retractors required for cylinder operation are sold separately below.

Retractors

For field conversion of 1590 inactive device to NL or HB functions.Model No. List Price

RTR10 1590 Retractor Single Door 13RTR11 1590 Retractor Single Door with Riser 13RTR12 1590 Retractor Pair with Mullion 1 3/4" Door 13RTR13 1590 Retractor Pair with Mullion 2 1/4" Door 13

Risers

Model No. List Price

RSR1490 1490 Riser Pkg 78RSR1590 1590 Riser Pkg 78

▲

▲

▲



MullionsAluminum Removable Mullions shipped complete with mounting brackets, screws, stabilizersand adjustable mortise strike.

For Openings Up to:

RM70(2090 Rim Devices) DC13,

US28 DC35

7'2" 641 6798'2" 689 7309'2" 739 77910'2" 792 831

RM150 (1590 Rim Device)

7'2" 652 6898'2" 704 7419'2" 756 79510'2" 807 847

RM170(1790 Rim Device)

7'2" 641 6798'2" 689 7309'2" 739 77910'2" 792 831

Mullion Stabilizer525 Mullion Stabilizers (set of 2) 38 42

REFERENCE NOTES:For use on doors with stiles as narrow as 1 1/4", reinforced with steel insertions.Blank Mullions (without strike preparation) are available at the same price as standard Mullions.

StrikesStrikes - Concealed Vertical Rod P28 P13 P35 US32D

PB48 Top strike for 1990/1490/1690/2390 devices – 20 20 20

Strikes - Rim

STK45 Strike for inactive leaf, pr of drs with 1590/1790/2090 devices – – 72 –SD35 Strike for 1/3" x 1/2" blade stop, 2090 device. 70 70 70 –SD36 Strike for all stops, 2090 device. 70 70 70 –TD35 Strike for single doors, 1590 or 1790 device. – – 103 –

Strikes - Mullions

STK70 Adjustable mortise strikes (pair). – – – 109STK150 Adjustable mortise strikes (pair). – – – 109STK170 Adjustable mortise strikes (pair). – – – 109

REFERENCE NOTES:The RD64 strike has been discontinued. The Von Duprin 264 strike can be used for applications previously requiring the RD64.The RD43 & RD44 strikes have been discontinued. The Von Duprin 1609 strike can be used for applications previously requiring the RD43 or RD44.


Exploded View And Parts List



2524

18

10

11

6

13

11

27

28

5

12

33

21

34 38

2

17

4

3

16

29

7

32

36

39

30

37

29

20

35 38

17

14

8

31

22

10

18

33

26

10

23

10

31

8

9

LEFT HAND REVERSE SHOWN

4

4

1990 Series(For Devices Furnished After 5/1/77)

Left Hand Reverse Shown


Model Pkg List No. Description Part No. Finish Qty Price

2 PB2 Case Mounting Stud STUD.101 – 10 21.003 PB3 Bearing Bushing BUSH.109 – 10 18.004 PB4 Retaining Ring .250 RRING.109 – 25 14.005 PB5 Pinion Cam CAM.102 – 10 102.00

PB140 Pinion Cam 4270903177 – each 14.006 PB10 Cylinder Bushing BUSH.102 – 10 18.007 PB12 1/4-20 1" FPHTC Typ 23 SCREW.1027 US32D 10 29.00

PB12 1/4-20 1" FPHTC Typ 23 SCREW.1015 BLACK 10 29.008 PB13 990 Axle Pin PIN.106 US32D 10 94.00

PB15 1990 Axle Pin PIN.115 – 10 94.009 PB14 Dog Screw SCREW.1022 – 25 82.0010 PB17 10-32 1/4" UFPHMS SCREW.1028 US32D 10 16.00

PB17 10-32 1/4" UFPHMS SCREW.1029 BLACK 10 16.00





11 PB23 Rod Jam Nut NUT.101 – 10 16.0012 ■ PB24 SU/PL/ES/RL Rod 4270100017 – each 26.00

SU/PL/ES/RL Rod-1/4" Insulclad 7’ 4270102427 – each 26.00SU/PL/ES/RL Rod-1/4" Insulclad 8’ 4270102426 – each 81.00

13 PB25 Hex Bottom Rod 4270101825 – each 26.0014 PB30 Allen Wrench WRENCH.101 – 10 12.5016 PB35 Rod Retractor RETRACT.101 – 10 41.0017 PB38 1/4-20 3/8" Hex Soc Set SCREW.1030 US32D 25 23.00

PB38 1/4-20 3/8" Hex Soc Set SCREW.1039 BLACK 25 23.0018 PB54 Latch Mtg Bracket Kit-HMD BRKTASY.101 – each 36.0021 PB88 Lift Bracket Assembly 4270100013 – each 17.0022 PB99 Hex Dogging Key KEY.101 – 10 29.0023 ● PB129 RL Bottom Latch 4270100521 – each 70.0024 ● PB130 SU Top Latch 4270101806 – each 82.0025 ● PB131 ES Top Latch 4270100346 – each 96.0026 ● PB132 PL Bottom Latch 4270101482 – each 70.0027 PB133 Hex Bottom Bolt 4270101830 – each 31.0028 PB134 Hex Rod Guide Assembly 4270107176 US32D each 30.00

PB134 Hex Rod Guide Assembly 4270107178 P35 each 30.00Hex Rod Guide Screws SCREW.1076 US28 10 6.50Hex Rod Guide Screws SCREW.1081 DC13/DC35 10 6.50ES Latch Pin PIN.110 – 10 16.00Case Retainer RETAIN.101 – 10 18.00SU/ES/PL/HH Latch Spirol Pin PIN.109 – 10 13.00Crossbar Tie Rod 4270100312 – each 53.00End Case Retaining Ring RRING.103 – 25 9.00

▲ RD9 Old Style Tension Spring SPRING.102 – 10 26.0029 RD10 Spring Pin PIN.104 – 10 16.0030 SD9 Tension Spring SPRING.103 – 10 23.0031 SD43 Axle Bushing BUSH.103 – 25 23.0032 SD45 Spring Retainer RETAIN.102 – 25 14.0033 SR33 10-32 3/8" FPHMS SCREW.1037 – 25 14.00

● RA1 SU Top Rod Assembly 7' Dr 4270106632 – each 111.00● RA2 SU Top Rod Assembly 8' Dr 4270106633 – each 167.00● RA3 SU Top Rod Assembly 9' Dr 4270101818 – each 180.00● RA4 SU Top Rod Assembly 10' Dr 4270101819 – each 196.00● RA5 ES Top Rod Assembly 7' Dr 4270101873 – each 139.00

ES Top Rod Assembly 8' Dr 4270101874 – each 211.00● RA6 RL Bottom Rod Assembly 4270100522 – each 111.00

RA7 Hex Bottom Rod Assembly 4270101831 – each 58.00● RA8 PL Bottom Rod Assembly 4270100266 – each 113.00

SU Rod 8’ Door 4270100018 – each 81.00SU Ext Rod Kit Up to 9’ Dr (not shown) 4270100172 – each 72.00SU Ext Rod Kit Up to 10’ Dr (not shown) 4270100197 – each 83.00

■ Standard SU Top Rod or Standard PL, ES or RL Bottom Rod.

● Specify if door material other than aluminum. Complete rod and latch assembly includes PB24 standard rod and PB23 nut.Part numbers shown are for standard centerlines and assembled lengths.

▲ Not shown in parts diagram. For devices shipped before May 1977.



15




ModelNo. Part No. Finish List Price

34 End Case Assy LH(Includes part numbers: 4, 8, 9, 17, 29, 31, 32, 36, 38)

LH = Lock Stile assembly for LHR Device orHinge Stile assembly for RHR Device

DCX-2 4270902776 P28 150.00DCX-2 4270902778 P13 165.00DCX-2 4270902779 P35 165.00PBX-1 CASE.210 US3 427.00PBX-1 CASE.214 US4 483.00PBX-1 CASE.216 US10 427.00PBX-1 CASE.218 US10B 483.00PBX-1 CASE.223 US26D 483.00PBX-1 CASE.221 US26 483.00PBX-1 CASE.233 US15 628.00PBX-1 CASE.231 US14 628.00

36 Lever Arm LH

LH = Lock Stile Lever Arm for LHR Device orHinge Stile Lever Arm for RHR Device

DC15 4270902799 P28 45.00DC15 4270902802 P13 52.00DC15 4270902803 P35 52.00SD15* LARM.173 US3 137.00SD15* LARM.174 US4 175.00SD15* LARM.175 US10 137.00SD15* LARM.176 US10B 175.00SD15* LARM.180 US26D 175.00SD15* LARM.179 US26 175.00SD15* LARM.178 US15 206.00SD15* LARM.177 US14 206.00

38 Housing Assembly(Includes housing, retainer spring, retainer, dog screw and mounting screws)

DC1 4270902787 P28 90.00DC1 4270902789 P13 105.00DC1 4270902790 P35 105.00SD1* HOUSING.218 US3 277.00SD1* HOUSING.225 US4 302.00SD1* HOUSING.226 US10 277.00SD1* HOUSING.229 US10B 302.00SD1* HOUSING.231 US26D 302.00SD1* HOUSING.230 US26 302.00SD1* HOUSING.238 US15 416.00SD1* HOUSING.237 US14 416.00


35 End Case Assy RH(Includes part numbers: 4, 8, 9, 17, 29, 31, 32, 37, 38)

RH = Lock Stile assembly for RHR Device or Hinge Stile assembly for LHR Device


37 Lever Arm RHRH = Lock Stile Lever Arm for RHR Device or

Hinge Stile Lever Arm for LHR DeviceDC40 4270902805 P28 45.00DC40 4270902808 P13 52.00DC40 4270902809 P35 52.00SD40* LARM.181 US3 137.00SD40* LARM.182 US4 175.00SD40* LARM.183 US10 137.00SD40* LARM.184 US10B 175.00SD40* LARM.188 US26D 175.00SD40* LARM.187 US26 175.00SD40* LARM.186 US15 206.00SD40* LARM.185 US14 206.00

39 Crossbar 41"PB39 4270900091 US28 105.00PB39 4270900094 DC13 115.00PB39 4270900095 DC35 115.00PB39 CBAR.102 US3 253.00PB39 CBAR.132 US4 274.00PB39 4270900097 US10 253.00PB39 4270900098 US10B 274.00PB39 CBAR.209 US15 306.00PB39 CBAR.208 US14 306.00

Crossbar 48"CBAR.101 US28 121.00CBAR.116 DC13 131.00CBAR.135 DC35 131.00CBAR.143 US3 279.00CBAR.148 US4 300.00CBAR.160 US10 279.00CBAR.120 US10B 300.00CBAR.207 US15 332.00CBAR.206 US14 332.00


* 1990/2090 Lever Arms & Housing Assemblies in US finishes are not compatible with 990/1090 components. Replace withappropriate end case assembly or active housing assembly.

16




Crossbar Devices

PBX-2Part No. 4270902091 US32D List Price 36.00

4270902095 DC35 36.00

RDX-2Part No. 4270902121 US32D List Price 11.50

4270902125 DC35 11.50

Panic Device Repair Kit List Price

PB20 Complete Repair Kit 4270100583 252.00Maintenance Kit Box only 4270100582 17.00

Kit Includes:

Part Number Description Replacement Pkg.

12 RING.108 Retaining Rings RRING.109 (pkg/25)6 4270100130 1/4-20 x 3/8 Set Screws SCREW.1030 (pkg/25)6 BUSH.108 Bearing Bushing BUSH.109 (pkg/10)8 4270101753 Tension Springs SPRING.103 (pkg/10)2 4270100153 Dogging Screws SCREW.1022 (pkg/25)10 4270100108 10-32 x 1/4 UFPH MS SCREW.1028 (pkg/10)6 4299100213 1/4-20 x 1" FPH MS SCREW.1027 (pkg/10)3 4270100152 Spring Pins PIN.104 (pkg/10)1 4270100116 Dogging Key KEY.101 (pkg/10)1 4270100218 1/8" Allen Wrench WRENCH.101 (pkg/10)3 4270100110 Retractor RETRACT.101 (pkg/10)4 4270903177 Pinion Cams CAM.102 (pkg/10)8 4230100017 Center Case Mounting Studs STUD.101 (pkg/10)12 4299100961 8-32 x 1/2" UFPH TC Screws SCREW.1032 (pkg/25)8 4270100151 Tension Springs SPRING.102 (pkg/10)6 4270101778 Axle Bushings BUSH.103 (pkg/25)3 4270108348 PB48 Strike US32D EACH3 4270106026 PB48 Strike Shims SHIM.112 (pkg/10)4 4270100663 Cylinder Bushings BUSH.102 (pkg/10)1 4270100013 Lift Bracket Assy EACH4 4270106997 Axle Pins PIN.115 (pkg/10)2 4270100026 3/16 x 13/16 Roll Pins PIN.109 (pkg/10)2 4270100075 3/16 x 9/16 Roll Pins PIN.110 (pkg/10)1 4270100299 Dogging Key Tag EACH12 4299100997 Retaining Rings RRING.103 (pkg/25)1 4270100582 Maintenance Kit Box EACH

1990 Auxiliary Pkg. 2090 Auxiliary Pkg.

Parts Kit For Easy ServicingOf 1990 Devices

17





37

12

28

31

30

30

31

33

32

11

34

37

33 35

39

36

29

7

86

1

9

5

1613

26

14

15

4

3

1

1

8 67

11

2

2

Left Hand Reverse Shown


18






1 PB2 Case Mounting Stud STUD.101 - 10 21.002 PB53 Retaining Ring .250 RRING.103 - 10 9.003 PB5 Pinion Cam CAM.102 - 10 102.00

PB140 Pinion Cam 4270903177 - each 14.004 PB10 Cylinder Bushing BUSH.102 - 10 18.005 PB12 1/4-20 1" FPHTC TYP23 SCREW.1027 US32D 10 29.00

PB12 1/4-20 1" FPHTC TYP23 SCREW.1015 BLACK 10 29.006 PB13 1090 Axle Pin PIN.106 SS 10 94.00

PB15 2090 Axle Pin PIN.115 US32D 10 94.00Latch Pivot Pin PIN.116 – 10 9.50

7 PB14 Dog Screw SCREW.1022 - 25 82.009 PB30 Allen Wrench WRENCH.101 - 10 12.5011 PB38 1/4-20 3/8" Hex Soc Set Screw SCREW.1030 US32D 25 23.00

PB38 1/4-20 3/8" Hex Soc Set Screw SCREW.1039 BLACK 25 23.0012 PB42 Adapter Plate Assembly 4270100304 - 2 21.0013 PB61 Latch Spring SPRING.104 - 10 11.5014 PB62 Latch Link 4270101840 - each 10.0015 PB63 4-40 3/8" FL Posi-Drive Screw SCREW.1031 - 10 10.0016 PB64 Latchbolt Retractor RETRACT.102 - 10 118.0026 PB81 Retaining Ring .240 RRING.102 - 10 9.0028 PB89 2090 Backplate Assembly LHR 4270902968 - each 49.00

PB89 2090 Backplate Assembly RHR 4270902974 - each 49.0029 PB99 Hex Dogging Key KEY.101 - 10 29.00

Crossbar Tie Rod 4270100312 - each 53.0030 RD10 Spring Pin PIN.104 - 10 16.0031 ▲ RD9 Old Style Tension Spring SPRING.102 - 10 26.00

SD9 Tension Spring SPRING.103 - 10 23.0032 SD43 Axle Bushing BUSH.103 - 25 23.0033 SD45 Spring Retainer RETAIN.102 - 25 14.00

REFERENCE NOTE:▲Not shown in parts diagram.

19





34 End Case Assy LH(Includes part numbers: 2, 6, 7, 11, 25, 31, 32, 33, 35, 37)

LH = Hinge Stile assembly for RHR Device


35 Lever Arm LH - Active

LH = Lock Stile Lever Arm for LHR Device


36 Lever Arm LH - End Case

LH = Hinge Stile Lever Arm for RHR Device



34 End Case Assy RH(Includes part numbers: 2, 6, 7, 11, 25, 31, 32, 33, 34, 36)

RH = Hinge Stile assembly for LHR Device


35 Lever Arm RH - Active

RH = Lock Stile Lever Arm for RHR Device


36 Lever Arm RH - End Case

RH = Hinge Stile Lever Arm for LHR Device



* 1990/2090 Lever Arms & Housing Assemblies in US finishes are not compatible with 990/1090 components. Replace with appropriate end case assembly or active housing assembly.

20






37 Active Housing Assembly LH(Includes part numbers: 3, 4, 14, 15, 28, 34)

LH = Lock Stile assembly for LHR Device

DCX-1 4270902740 P28 191.00DCX-1 4270902742 P13 204.00DCX-1 4270902743 P35 204.00RDX-1 CASE.236 US3 498.00RDX-1 CASE.237 US4 552.00RDX-1 CASE.238 US10 498.00RDX-1 CASE.239 US10B 552.00RDX-1 CASE.243 US26D 552.00RDX-1 CASE.242 US26 552.00RDX-1 CASE.241 US15 697.00RDX-1 CASE.240 US14 697.00

39 Crossbar 41"PB39 4270900091 US28 105.00PB39 4270900094 DC13 115.00PB39 4270900095 DC35 115.00PB39 CBAR.102 US3 253.00PB39 CBAR.132 US4 274.00PB39 4270900097 US10 253.00PB39 4270900098 US10B 274.00PB39 CBAR.209 US15 306.00PB39 CBAR.208 US14 306.00


37 Active Housing Assembly RH(Includes part numbers: 3, 4, 14, 15, 28, 34)

RH = Lock Stile assembly for RHR Device

DCX-1 4270902746 P28 191.00DCX-1 4270902748 P13 204.00DCX-1 4270902749 P35 204.00RDX-1 CASE.211 US3 498.00RDX-1 CASE.224 US4 552.00RDX-1 CASE.225 US10 498.00RDX-1 CASE.226 US10B 552.00RDX-1 CASE.229 US26D 552.00RDX-1 CASE.228 US26 552.00RDX-1 CASE.235 US15 697.00RDX-1 CASE.234 US14 697.00

Crossbar 48"CBAR.101 US28 121.00CBAR.116 DC13 131.00CBAR.135 DC35 131.00CBAR.143 US3 279.00CBAR.148 US4 300.00CBAR.160 US10 279.00CBAR.120 US10B 300.00CBAR.207 US15 332.00CBAR.206 US14 332.00

21




1490/1590 SeriesPushbar

14

20

19

92

6

3

7

1

10

12

13

7

3

8

2

18

21

14

19

9

2

6

3 7

12

13

10

47

5

8

18

7

1490 1590

1490/1590 SeriesPushbar

Model Pkg ListNo. Description Part No. Finish Qty Price

1 PB17 10-32 1/4" UFPHMS Screw SCREW.1028 – 10 16.002 PB200 1490/1590 Pushbar Mounting Bracket 4270106786 – each 17.003 PB201 1490/1590 Pushbar End Cap 4270106787 P35 each 35.004 PB202 1590 Pushbar End Cap 4270106875 P35 each 14.005 PB203 1590 Center Case Cover P35 4270106863 P35 each 21.006 PB204 1490/1590 P/Bar Hingeside Mounting Plate 4270106770 – each 10.007 ● PB205 8-32 1" FH Torx Screw SCREW.1050 – 10 23.00

PB205 8-18 1.14" FPH TF Typ 25 SCREW.1143 – 10 16.008 PB206 12-24 1 1/2" UFPHMS Screw (1490) SCREW.1282 – 10 17.00

PB219 12-24 1" UFPHMS Screw (1590) SCREW.1066 – 10 17.009 PB207 12-24 1" PPH W/SEMS EXT TF Screw SCREW.1053 – 10 18.0010 PB208 8-32 1/4" UFPHMS Screw SCREW.1012 US32D 10 9.00

PB208 8-32 1/4" UFPHMS Screw SCREW.1055 BLACK 10 9.0012 PB210 Pushbar Bumper 4' (2 ea. Required) BUMPER.103 – each 9.0013 PB211 Short Arm Key KEY.102 – 10 27.0014 PB212 1490 RHR/1590 LHR Push Label 4270107321 BLACK each 21.00

PB213 1490 LHR/1590 RHR Push Label 4270107323 BLACK each 21.00PB214 1490 RHR/1590 LHR Push Label 4270107320 GOLD each 21.00PB215 1490 LHR/1590 RHR Push Label 4270107322 GOLD each 21.00

● For Devices shipped before September, 2004.

22




1490/1590 Series (continued)Pushbar


18 PB250 1490 Pushbar 36" 4270107027 US28 each 83.001490 Pushbar 36" 4270107028 DC13 each 88.001490 Pushbar 36" 4270107029 DC35 each 88.001490 Pushbar 36" 4270107685 US3 each 861.001490 Pushbar 36" 4270107689 US4 each 861.001490 Pushbar 36" 4270107686 US10 each 861.001490 Pushbar 36" 4270107691 US10B each 902.001490 Pushbar 36" 4270107687 US14 each 902.001490 Pushbar 36" 4270107688 US15 each 902.00



18 PB261 1590 Pushbar 48" 4270107095 US28 each 102.001590 Pushbar 48" 4270107096 DC13 each 105.001590 Pushbar 48" 4270107097 DC35 each 105.001590 Pushbar 48" EXT.255 US3 each 875.001590 Pushbar 48" EXT.259 US4 each 875.001590 Pushbar 48" EXT.256 US10 each 875.001590 Pushbar 48" EXT.261 US10B each 917.001590 Pushbar 48" EXT.257 US14 each 917.001590 Pushbar 48" EXT.258 US15 each 917.00

19 PB270 1490 Channel 36" 4270107034 US28 each 83.001490 Channel 36" 4270107035 DC13 each 88.001490 Channel 36" 4270107036 DC35 each 88.00




20 PBX-23 1490 Lockside End Cap Assembly ECAP.111 P35 each 27.0021 PBX-24 1490 Hingeside End Cap Assembly ECAP.103 P35 each 31.00

● PBX-25 1490 Mounting Package PKG.102 US28 each 15.00● PBX-25 1490 Mounting Package PKG.104 DC35 each 16.00▲ PBX-26 1590 Mounting Package PKG.105 - each 15.00

REFERENCE NOTES:For complete pushbar assemblies refer to page 35.

● PBX-25 includes part numbers 1, 7, 8, 13 and a hex dogging key▲ PBX-26 includes part numbers 6, 7, 8, 9, 13 and a hex dogging key


23




1490/1590 SeriesActivating Baseplate Assembly

7

2

1319

187

8

3

4

6

7 5

7 614

16

1711

15

13 19 12

10 714

7

9

1490

1319

187

8

114

11

15

13 19 12

10 714

7

9

15

20

21

See panic hardware price list for retractor selections.

1590

24




1490/1590 SeriesActivating Baseplate Assembly


1 PB124 1590 Latchbolt Assembly 4270107603 - each 90.002 PB216 Lift Lever Axle 4270106769 - each 10.003 PB217 Lift Lever Washer WASHER.102 - 10 14.004 PB218 Retaining Ring .500 RRING.104 - 10 11.505 PB139 Link 4270106773 - each 9.006 PB220 Link Washer WASHER.103 - 10 14.007 PB221 Retaining Ring .188 RRING.105 - 10 9.008 PB222 Dogging Bracket Assembly 4270107046 - each 51.009 PB223 Dogging Clip 971659-79 - each 9.0010 PB224 Compression Spring 4299101020 - each 8.0011 Act. Rod Spring Stop CZNC 971660-79 - each 11.5012 PB226 Clevis 4270106977 - each 70.0013 PB227 8-32 3/8" PPHMS w/Sems SCREW.1136 - 10 27.0014 PB228 Clevis Assembly Axle AXLE.1007 - 10 12.5015 PB229 10-32 3/8" UFPHMS Screw SCREW.1043 - 10 12.5016 PB230 Lift Lever 4270106745 - each 14.0017 PB231 Pivot Pin 4270106772 - each 14.0018 PB232 Hex Dogging Key 5/32" KEY.10020 - 10 35.0019 PB233 #8 Washer Hi-Collar WASHER.107 - 10 10.0020 RTR10 1590 Retractor-Sgl Dr 1 3/4" 4270106888 - each 13.00

RTR11 1590 Retractor-Sgl Dr 2 1/4" 4270107422 - each 13.00RTR12 1590 Retractor-Pair w/Mullion 1 3/4" Dr 4270107520 - each 13.00RTR13 1590 Retractor-Pair w/Mullion 2 1/4" Dr 4270107521 - each 13.00

21 PB355 1590 Latchbolt Spring SPRING.127 - 10 12.50

1490 Base Plate AssembliesPBX-50 1490 Baseplate Assembly LHR 36" 4270107061 – each 350.00PBX-51 1490 Baseplate Assembly LHR 48" 4270107048 – each 392.00PBX-52 1490 Baseplate Assembly RHR 36" 4270107047 – each 350.00PBX-53 1490 Baseplate Assembly RHR 48" 4270107060 – each 392.00PBX-58 1590 Baseplate Assembly 36" 4270107089 – each 253.00PBX-59 1590 Baseplate Assembly 48" 4270107090 – each 295.00


25




EL1490/EL1590 SeriesActivating Baseplate Assembly

6

119 8

5

43

2425

261514

23

21

20

19

18

1415

22

14

15

12

10

17

EL1490

7

58

11

9

3

4

14

13

1312

10

16

1

EL1590

26




EL1490/EL1590 SeriesActivating Baseplate Assembly


1 PB125 EL1590 Latchbolt Assembly 36" 4270107623 - each 264.00PB125 EL1590 Latchbolt Assembly 48" LATCHR.102 - each 268.00

2 PB126 S1590 Latchbolt Assembly 4270108763 - each 197.003 PB300 EL Solenoid SOLENOID.142 - each 182.004 PB301 EL Potted Circuit Breaker 110741-00 - each 201.005 PB302 EL Solenoid Plunger PLUNGER.101 - each 53.00

PB303 EL Cable Assembly (not shown) 110388-00 - each 29.006 PB307 EL1490 Pull Rod 36" 4270107193 - each 29.00

PB307 EL1490 Pull Rod 48" 4270107361 - each 35.007 PB308 EL1590 Push Rod 36" 4270107342 - each 35.00

PB308 EL1590 Push Rod 48" 4270107360 - each 43.008 PB52 1/4-20 Hex Nut NUT.103 - 10 5.009 PB310 EL1590 Link 4270107341 - each 6.5010 PB311 Subminiature Switch Assembly 36" SWITCH.1002 - each 49.00

PB311 Subminiature Switch Assembly 48" SWITCH.1004 - each 55.0011 PB77 1/4-20 29/32" Soc Shoulder Screw SCREW.1061 BLACK 10 27.00

PB78 8-32 3/8 PPH w/Sems Machine Screw SCREW.1136 - 10 27.0012 PB58 2-56 RHMS Screw SCREW.1063 - 10 6.50

PB59 8-32 1/4 PPH MS Typ 2A Screw SCREW.1065 - 10 5.0013 PB41 Nylon Washer WASHER.113 - 10 8.0014 PB221 Retaining Ring .188 RRING.105 - 10 9.0015 PB220 Link Washer WASHER.103 - 10 14.0016 PB177 EL1590 Release Lever Assembly LEVER.103 - each 58.0017 PB176 EL1490 Lift Lever Spring-LHR 4270107429 - each 8.00

PB176 EL1490 Lift Lever Spring-RHR 4270107430 - each 8.0018 PB178 EL1490 Lift Lever Sub-Assembly LHR LEVER.104 - each 27.00

PB178 EL1490 Lift Lever Sub-Assembly RHR LEVER.105 - each 27.0019 PB179 EL Lift Lever Spacer 4270107194 - each 11.5020 PB135 EL1490 Pivot Bracket 4270107192 - each 8.0021 PB136 Lift Lever Washer 4270109142 - each 10.0022 PB137 Link Pin 4270107186 - each 7.0023 PB138 EL1490 Lift Lever Bracket-LHR 4270107188 - each 8.00

PB138 EL1490 Lift Lever Bracket-RHR 4270107189 - each 8.0024 PB139 1490 Link 4270106773 - each 9.0025 PB217 Lift Lever Washer WASHER.102 - 10 14.0026 PB218 Retaining Ring .500 RRING.104 - 10 11.50

PB328 Truarc Retaining Ring T5304-18 RRING.112 - 10 10.0027 Pivot Pin YZNC STL 4270107363 - 10 23.00

S1490/S1590 Baseplate AssembliesPBX-54 S1490 Baseplate Assembly LHR 36" BASEASY.210 – each 698.00PBX-55 S1490 Baseplate Assembly LHR 48" BASEASY.211 – each 739.00PBX-56 S1490 Baseplate Assembly RHR 36" BASEASY.208 – each 698.00PBX-57 S1490 Baseplate Assembly RHR 48" BASEASY.209 – each 739.00PBX-60 S1590 Baseplate Assembly 36" BASEASY.220 – each 599.00PBX-61 S1590 Baseplate Assembly 48" BASEASY.221 – each 642.00

EL1490/EL1590 Baseplate AssembliesPBX-62 EL1490 Conversion Kit LHR 36" KIT.1011 – each 791.00PBX-63 EL1490 Conversion Kit RHR 36" KIT.1010 – each 791.00PBX-64 EL1490 Conversion Kit LHR 48" KIT.1013 – each 791.00PBX-65 EL1490 Conversion Kit RHR 48" KIT.1012 – each 791.00PBX-66 EL1590 Conversion Kit 36" KIT.1008 – each 791.00PBX-67 EL1590 Conversion Kit 48" KIT.1009 – each 791.00


27





1 PB53 Retaining Ring .250 RRING.103 - 25 9.002 PB17 10-32 1/4 UFPH Screw SCREW.1028 US32D 10 16.00

PB17 10-32 1/4 UFPH Screw SCREW.1029 BLACK 10 16.003 PB23 3/8-24 Jam Nut NUT.101 - 10 16.004 PB56 Lift Bracket Assembly 4270106796 - each 46.00

PB57 EL Lift Bracket Assembly 4270107495 - each 55.005 PB79 Rod Washer WASHER.116 - 10 12.506 PB83 EL Hex Rod Guide Assembly 4270108426 US32D each 35.00

PB83 EL Hex Rod Guide Assembly GUIDE.101 P35 each 35.007 PB84 EL Hex Bushing BUSH.107 - 10 16.00

HH Hex Rod Guide Assembly GUIDE.102 P35 each 50.008 PB100 Top Rod 35.000" 4270106776 - each 43.009 PB101 Standard Bottom Rod 31.625" 4270106775 - each 43.00

PB102 EL Bottom Rod 34.625" 4270109003 - each 50.0010 PB128 EL Top Latch 4270105926 - each 111.00

PB130 SU Top Latch 4270101806 - each 82.0011 PB129 RL Bottom Latch 4270100521 - each 70.0012 PB133 Hex Bottom Bolt 4270101830 - each 31.0013 RA9 1490 Top Rod Assembly 7' Dr RODASY.110 - each 129.00

RA10 EL1490 Top Rod Assembly 7' Dr 4270109078 - each 157.0014 RA11 1490 Bottom Rod Assembly RODASY.112 - each 78.00

RA12 EL1490 Bottom Rod Assembly 4270109077 - each 85.0015 RA13 1490 Top/Btm Rod Assembly 7' Dr 4270106782 - each 253.00

RA14 EL1490 Top/Btm Rod Assembly 7' Dr 4270107497 - each 281.00RA15 1490 Extension Rod Kit over 7' up to 10' Drs 4270107791 - each 92.00

1490 SeriesRod Assembly

8

14

2

11

3

4

3

10

13

2

1

1

5

5

9

Standard Rod Assembly EL Rod Assembly

8

14

12

2

6

3

4

3

10

13

2

1

1

5

5

9

7


28




1490/1590 SeriesCylinder Assembly

56

1

2

3

4

7

4

3

2

16

5

1490 1590

Hold Back Night Latch

CAM ASSEMBLY


1 PB103 Cylinder Collar 1.00" 4270107213 P28 each 17.00PB103 Cylinder Collar 1.00" 4270107214 P13 each 17.00PB103 Cylinder Collar 1.00" 4270107215 P35 each 17.00PB104 Cylinder Collar 7 Pin 1.25" 4270109005 P28 each 28.00PB104 Cylinder Collar 7 Pin 1.25" 4270109006 P13 each 28.00PB104 Cylinder Collar 7 Pin 1.25" 4270109007 P35 each 28.00

2 PB105 Cylinder Tube w/Pin 1 3/4" Dr 4270107286 – each 30.00PB105 Cylinder Tube w/Pin 2" Dr 4270107833 – each 49.00PB105 Cylinder Tube w/Pin 2 1/4" Dr 4270107787 – each 49.00PB106 Cylinder Tube w/Pin 7 Pin 1 3/4" Dr 4270109009 – each 49.00PB106 Cylinder Tube w/Pin 7 Pin 2" Dr 4270109190 – each 49.00

HH Cylinder Tube w/Pin 1 3/4" Dr 4270109630 – each 36.00HH Cylinder Tube w/Pin 7 Pin 1 3/4" Dr CTUBE.232 – each 55.00

3 PB115 1490 NL Cam Assembly 4270107268 – each 24.00PB116 1490 HB Cam Assembly 4270107270 – each 24.00PB117 1590 NL Cam Assembly 4270107283 – each 24.00PB118 1590 HB Cam Assembly 4270107285 – each 24.00

4 PB120 Cylinder Adaptor Washer WASHER.108 – 10 11.505 PB121 Cylinder Lock Washer WASHER.109 CZNC 10 14.00

PB121 Cylinder Lock Washer WASHER.110 BLACK 10 14.006 PB122 Cylinder Collar Spring SPRING.105 – 10 8.007 PB206 12-24 1 1/2" UFPHMS Screw SCREW.1105 CZNC 10 17.00

PB206 12-24 1 1/2" UFPHMS Screw SCREW.1099 BLACK 10 17.00


29




15

14

13

6

17

23

12

9

10

5

4

87

2220

18

1

19

11

2930

24

25

3

2

21

3128

33

32

24

26

36

11

34

27

1690 SeriesExploded View and Parts List

1690 Series


1 PB17 10-32 1/4" UFPHMS SCREW.1028 US32D 10 16.00PB17 10-32 1/4" UFPHMS SCREW.1029 BLACK 10 16.00

2 PB3 Bearing Bushing BUSH.109 - 10 18.003 PB4 Retaining Ring .250 RRING.109 - 25 14.004 PB114 Lock Stile Mounting Screw SCREW.1069 - 10 10.005 PB127 Lift Bracket BRKT.138 - each 16.006 PB232 Hex Dogging Key 5/32" KEY.10020 - 10 35.00

PBX-27 Auxiliary Package (part 1-6) PKG.150 US28 each 18.00PBX-27 Auxiliary Package (part 1-6) PKG.151 DC13/DC35 each 18.00

7 PB10 Cylinder Bushing BUSH.102 - 10 18.008 PB5 Pinion Cam CAM.102 - 10 102.00

PB140 Pinion Cam 4270903177 - each 14.009 PB35 Rod Retractor RETRACT.101 - 10 41.0010 PB141 Retainer Screw SCREW.1074 - 10 14.0011 PB312 Pinion Support Bracket BRKT.478 - each 7.0012 PB313 Center Case Cover Kit COVER.113 - each 30.0013 PB314 Channel/Hinge End Cap Kit ECAP.130 - each 19.00


30




1690 Series (continued)


14 PB315 1/4-20 1/2" PPHMS Screw SCREW.1070 – 10 9.0015 ★ PB316 #8 1.1/2" FPH TC Typ AB Screw SCREW.1072 – 10 9.00

PB316 8-18 1.14" FPH TF Typ 25 SCREW.1143 – 10 16.0016 PB317 1/4-20 3/8" Hex Soc Set Screw SCREW.1067 BLACK 3 10.00

PB317 1/4-20 3/8" Hex Soc Set Screw SCREW.1068 US28 3 10.0017 PBX-16 Dogging Kit KIT.1197 – each 24.0018 PB322 Push Bar Pin PIN.128 – 10 9.0019 PB323 Dogging Spring 971493-76 – each 5.0020 PB338 Actuator Arm Bracket Assy BRKTASY.107 – each 12.5021 PB318 Lock Stile Push Bar End Cap ECAP.129 P35 each 12.5022 ★ PB345 8-3/4" FPHSMS SCREW.1077 BLACK 10 16.00

PB345 8-18 .3/4" FPH TF Typ 25 SCREW.1141 – 10 12.5023 ▲ PB324 8-5/8" FPHSMS SCREW.1025 BLACK 10 14.0024 PB23 Rod Jam Nut NUT.101 – 10 16.0025 ■ PB24 SU/PL/ES/RL Rod 4270100017 – each 26.00

PB24 SU/PL/ES/RL Rod-1/4" Insulclad 7' 4270102427 – each 26.00PB24 SU/PL/ES/RL Rod-1/4" Insulclad 8' 4270102426 – each 81.00

SU Rod 8' Door 4270100018 – each 81.00SU Ext Rod Kit Up to 9' Dr (not shown) 4270100172 – each 72.00SU Ext Rod Kit Up to 10' Dr (not shown) 4270100197 – each 83.00

26 PB25 Hex Bottom Rod 4270101825 – each 26.0027 PB54 Latch Mtg Bracket Kit-HMD BRKTASY.101 – each 36.0028 ● PB129 RL Bottom Latch 4270100521 – each 70.0029 ● PB130 SU Top Latch 4270101806 – each 82.0030 ● PB131 ES Top Latch 4270100346 – each 96.0031 ● PB132 PL Bottom Latch 4270101482 – each 70.0032 PB352 Hex Bottom Bolt Beveled BOLT.1004 – each 35.0033 PB134 Hex Rod Guide Assembly 4270107176 US32D each 30.00

PB134 Hex Rod Guide Assembly 4270107178 P35 each 30.00Hex Rod Guide Screws SCREW.1076 US28 10 6.50Hex Rod Guide Screws SCREW.1081 DC13/DC35 10 6.50ES Latch Pin PIN.110 – 10 16.00SU/ES/PL/HH Latch Spirol Pin PIN.109 – 10 13.00

34 SR33 10-32 3/8" FPHMS SCREW.1037 – 25 14.00● RA1 SU Top Rod Assembly 7' Dr 4270106632 – each 111.00● RA2 SU Top Rod Assembly 8' Dr 4270106633 – each 167.00● RA3 SU Top Rod Assembly 9' Dr 4270101818 – each 180.00● RA4 SU Top Rod Assembly 10' Dr 4270101819 – each 196.00● RA5 ES Top Rod Assembly 7' Dr 4270101873 – each 139.00

ES Top Rod Assembly 8' Dr 4270101874 – each 211.00● RA6 RL Bottom Rod Assembly 4270100522 – each 111.00

RA17 Hex Bottom Rod Assembly RODASY.1075 – each 79.00● RA8 PL Bottom Rod Assembly 4270100266 – each 113.00

36 PB321 Pushbar Anchor Bracket BRKT.128 – each 7.00

REFERENCE NOTES:■ Standard SU Top Rod or Standard PL, ES or RL Bottom Rod.● Specify if door material other than aluminum. Complete rod and latch assembly includes PB24 standard rod and PB23 nut.

Part numbers shown are for standard centerlines and assembled lengths.★ For devices shipped before September, 2004.▲ For covers shipped before July 2006.

31




1690 Series (continued)

Model Pkg ListNo. Description Part No. Finish Qty PricePB123 NL Cylinder Assy & Auxiliary Parts (parts 1-10) KIT.1156 US28 each 45.00PB123 NL Cylinder Assy & Auxiliary Parts (parts 1-10) KIT.1157 DC13/DC35 each 45.00169CA 1690NL Cylinder Assembly (parts 7-10) CYLASY.1083 – each 27.00PB18 10-32 3/8" UFPH TF SCREW.1121 US28 8 7.50PB18 10-32 3/8" UFPH TF SCREW.1114 DC13/DC35 8 7.50PB19 Center Case Bracket BRKT.156 – each 12.00

Hex Dogging Shaft SHAFT.101 – each 4.50PB328 Truarc Retaining Ring T5304-18 RRING.112 – 10 10.00PB353 RX Switch Wire Assembly (not shown) SWITCH.1006 – each 162.00PB301 EL Potted Circuit Breaker (not shown) 110741-00 – each 201.00PB300 EL Solenoid 24 VDC (not shown) 971687-00 – each 182.00PB302 EL Plunger (not shown) PLUNGER.101 – each 53.00PB303 EL Cable Assembly (not shown) 110388-00 – each 29.00

1690/1790 Pushbars and Channels Standard EL

PBX-38 1690/1790 Pushbar 30" EXT.827 EXT.830 US28 each 78.001690/1790 Pushbar 30" EXT.828 EXT.825 DC13 each 90.001690/1790 Pushbar 30" EXT.829 EXT.826 DC35 each 90.001690/1790 Pushbar 30" EXT.2351 EXT.2323 US3 each 211.001690/1790 Pushbar 30" EXT.2352 EXT.2333 US10 each 190.001690/1790 Pushbar 30" EXT.2353 EXT.2338 US26 each 211.001690/1790 Pushbar 30" EXT.2354 EXT.2340 US26D each 190.00




REFERENCE NOTES:

✹ RX Switch Kit valid for Field Install RX Option on Devices shipped after June, 2002.

✹


32




1

105

4

3

11

9

23 16

8

2120

19 18

17

15

1413

6

12

2

22


33




1790 SeriesModel Pkg List No. Description Part No. Finish Qty Price

1 PB314 Channel/Hingeside End Cap Kit ECAP.130 – each 19.002 PB329 Center Case Cover Kit COVER.120 – each 30.003 PB232 Hex Dogging Key 5/32" KEY.10020 – 10 35.004 PB315 1/4-20 1/2" PPHMS Screw SCREW.1070 – 10 9.005 PB316 #8 1.1/2" FPH TC Typ AB Screw SCREW.1072 – 10 9.00

PB316 8-18 1.1/4" FPH TF Typ 25 SCREW.1143 – 10 16.006 PB330 1/4-20 3/4" PPHMS Screw SCREW.1075 – 10 10.00

PB18 10-32 3/8" UFPH TF SCREW.1121 US28 8 7.507 PBX-18 Auxiliary Package PKG.133 – each 8.008 PB325 Latch Assembly LBOLT.105 – each 43.00

PB353 RX Switch Wire Assembly (not shown) SWITCH.1006 – each 162.00PB301 EL Potted Circuit Breaker (not shown) 110741-00 – each 201.00PB300 EL Solenoid 24VDC (not shown) 971687-00 – each 182.00PB302 EL Plunger (not shown) PLUNGER.101 – each 53.00PB303 EL Cable Assembly (not shown) 110388-00 – each 29.00

9 PB322 Pushbar Pin PIN.128 – 10 9.0010 PB323 Dogging Spring 971493-76 – each 5.00

Hex Dogging Shaft SHAFT.101 – each 4.5011 PBX-16 Dogging Kit KIT.1197 – each 24.0012 PB324 8 x 5/8 FPHTC Typ 25 SCREW.1025 – 10 14.0013 PB318 Lock Stile End Cap ECAP.129 DC35 each 12.5014 PB345 8-3/4" FPHSMS SCREW.1077 BLACK 10 16.00

PB345 8-18 .3/4" FPH TF Typ 25 SCREW.1141 – 10 12.5015 PB320 Latch Pin 969467-89 – each 8.0016 PB328 Truarc Retaining Ring T5304-18 RRING.112 – 10 10.0017 PB331 Short Arm Allen Wrench 4270109548 – each 5.00

PB327 10-32 3/8" UFPH MS SCREW.1150 – 10 15.0019 PB326 1790 Channel Spacer SPACER.107 – each 12.5020 PB319 Drive Bushing CAMASY.101 – each 36.0021 PB344 Slider SLIDER.101 – each 6.0022 179CA 1790 NL/HB Cylinder Assembly CYLASY.1151 – each 27.0023 PB321 Pushbar Anchor Bracket BRKT.128 – each 7.00

1790 Pushbars and Channels on page 31

✹

■

■

REFERENCE NOTES:✹ RX Switch Kit valid for Field Install RX option on devices shipped after June, 2002■ For Devices shipped before September, 2004.▲ For Devices shipped before July, 2006.

▲


34





8

1

7

9

10

7

12

26 12

3

168

8

17

9

11

15

20

11

24

25

11

19

18

2

3

4

56

7

27

4

13 6

21

1

10

2322

15 15

35




2390 SeriesModel Pkg List No. Description Part No. Finish Qty Price

1 PB323 Dogging Spring 971493-76 – each 5.002 PB334 Lift Lever Axle AXLE.1006 – each 5.003 PB335 Pushbar Anchor Bracket BRKT.137 – each 12.504 PB336 Lift Bracket BRKT.143 – each 11.505 PB338 Actuator Arm Bracket Assembly BRKTASY.107 – each 12.506 PB3 Bearing Bushing BUSH.109 – 10 18.007 PB341 Fixed Cover COVER.127 – each 25.008 PB342 Moving Pushbar End Cap ECAP.143 – each 10.009 PB232 Hex Dogging Key 5/32" KEY.10020 – 10 35.0010 PBX-16 Dogging Kit KIT.1197 – each 24.0011 PB23 Rod Jam Nut NUT.101 – 10 16.0012 PB322 Pushbar Pin PIN.128 – 10 9.00

PBX-28 Mounting Package (parts 4,6,9,13,15) PKG.134 US32D each 18.00PBX-28 Mounting Package (parts 4,6,9,13,15) PKG.135 DC35 each 18.00

13 PB4 Retaining Ring .250 RRING.109 – 25 14.0015 PB17 10-32 1/4" UFPHMS SCREW.1028 US32D 10 16.00

PB17 10-32 1/4" UFPHMS SCREW.1029 BLACK 10 16.0016 PB345 #8 3/4" FPH TF AB Screw SCREW.1077 – 10 16.00

PB345 8-18 .3/4" FPH TF Typ 25 SCREW.1141 – 10 12.5017 PB350 12-14 1/2" UFPH MS Typ 25 Screw SCREW.1088 – 10 12.50

10-32 3/8" UFPH TF SCREW.1121 US28 8 7.5010-32 3/8" UFPH TF SCREW.1114 DC13/DC35 8 7.50Hex Rod Guide Screws SCREW.1076 US28 10 6.50Hex Rod Guide Screws SCREW.1081 DC13/DC35 10 6.50

RA16 Extension Rod Kit (not shown) EXTROD.1001 each 113.0018 PB134 Hex Rod Guide Assembly 4270107176 US32D each 30.00

PB134 Hex Rod Guide Assembly 4270107178 P35 each 30.0019 PB352 Hex Bottom Bolt-Beveled BOLT.1004 – each 35.0020 PB130 SU Top Latch 4270101806 – each 82.0021 PB131 ES Top Latch 4270100346 – each 96.0022 PB129 RL Bottom Latch 4270100521 – each 70.0023 PB132 PL Bottom Latch 4270101482 – each 70.00

ES Latch Pin PIN.110 – 10 16.00SU/ES/PL/HH Latch Spirol Pin PIN,109 – 10 13.00

PB353 RX Switch Wire Assembly (not shown) SWITCH.1006 – each 162.00PB303 EL Cable Assembly (not shown) 110388-00 – each 29.00PB301 EL Potted Circuit Breaker (not shown) 110741-00 – each 201.00PB300 EL Solenoid 24VDC (not shown) 971687-00 – each 182.00PB302 EL Plunger (not shown) PLUNGER.101 – each 53.00

24 PB357 Top Rod 34.00", CL=42.5,DH=83 3/16 ROD.1043 – each 26.00PB358 Top Rod 35.500", CL=41.25,DH=83 3/16 4270103324 – each 26.00PB359 Top Rod 39.000", CL=37.875,DH=83 3/16 ROD.1082 – each 26.00PB360 Top Rod 36.500", CL=40,DH=83 3/16 ROD.1036 – each 26.00

25 PB361 Bottom Rod 40.000", CL=42 1/2 ROD.1080 – each 26.00PB362 Bottom Rod 38.500", CL=41 1/4 ROD.1044 – each 26.00PB24 Bottom Rod 35.125", CL=37 7/8 4270100017 – each 26.00PB363 Bottom Rod 37.500", CL=40 ROD.1011 – each 26.00PB365 2390 LBR Kit KIT.1128 – each 11.50

REFERENCE NOTES:✹ RX Switch Kit valid for Field Install RX option on devices shipped after June, 2002★ For Devices shipped before September, 2004.

✹

★

36




2390 SeriesModel List No. Description Part No. Finish Price

26 PBX-30 Pushbar 21" EXT.3000 US28 113.00Pushbar 21" EXT.3001 DC13 123.00Pushbar 21" EXT.3002 DC35 123.00Pushbar 21" EXT.3003 Champagne 123.00

PBX-31 Pushbar 24" EXT.3004 US28 133.00Pushbar 24" EXT.3005 DC13 146.00Pushbar 24" EXT.3006 DC35 146.00Pushbar 24" EXT.3007 Champagne 146.00

27 PBX-32 Coverplate 21" EXT.3008 US28 43.00Coverplate 21" EXT.3009 DC13 51.00Coverplate 21" EXT.3010 DC35 51.00Coverplate 21" EXT.3011 Champagne 51.00

PBX-33 Coverplate 24" EXT.3012 US28 49.00Coverplate 24" EXT.3013 DC13 58.00Coverplate 24" EXT.3014 DC35 58.00Coverplate 24" EXT.3015 Champagne 58.00

PBX-34 EL Coverplate 21" EXT.3050 US28 43.00EL Coverplate 21" EXT.3051 DC13 51.00EL Coverplate 21" EXT.3052 DC35 51.00EL Coverplate 21" EXT.3053 Champagne 51.00

PBX-35 EL Coverplate 24" EXT.3054 US28 49.00EL Coverplate 24" EXT.3055 DC13 58.00EL Coverplate 24" EXT.3056 DC35 58.00EL Coverplate 24" EXT.3057 Champagne 58.00

■ PBX-9 Channel Assembly 42" Door CHASY.147 US28 73.00■ Channel Assembly 42" Door CHASY.160 DC13 90.00■ Channel Assembly 42" Door CHASY.107 DC35 90.00■ Channel Assembly 42" Door CHASY.158 Champagne 119.00■ PBX-10 Channel Assembly 48" Door CHASY.108 US28 84.00■ Channel Assembly 48" Door CHASY.109 DC13 121.00■ Channel Assembly 48" Door CHASY.125 DC35 121.00■ Channel Assembly 48" Door CHASY.207 Champagne 121.00■ PBX-36 Filler Plate 16.50, 42" Door EXT.2927 US28 23.00■ Filler Plate 16.50, 42" Door EXT.2949 DC13 25.00■ Filler Plate 16.50, 42" Door EXT.2950 DC35 25.00■ Filler Plate 16.50, 42" Door EXT.2951 Champagne 25.00■ PBX-15 Filler Plate 19.50, 48" Door EXT.440 US28 24.00■ Filler Plate 19.50, 48" Door EXT.445 DC13 26.00■ Filler Plate 19.50, 48" Door EXT.450 DC35 26.00■ Filler Plate 19.50, 48" Door EXT.2244 Champagne 26.00● RA-18 Top Rod Assy RHR AL=40.176 CL=42.5 DH=83 3/16" RODASY.10001 – 111.00● RA-19 Top Rod Assy RHR AL=41.426 CL=41.25 DH=83 3/16" RODASY.10002 – 111.00● RA-20 Top Rod Assy RHR AL=44.801 CL=37.875 DH=83 3/16" RODASY.10003 – 130.00● RA-21 Top Rod Assy RHR AL=42.676 CL=40 DH=83 3/16" RODASY.10004 – 111.00● RA-22 Top Rod Assy RHR AL=41.489 CL=41.25 DH=83 1/4" RODASY.10005 – 111.00● RA-23 Top Rod Assy LHR AL=40.176 CL=42.5 DH=83 3/16" RODASY.10006 – 111.00● RA-24 Top Rod Assy LHR AL=41.426 CL=41.25 DH=83 3/16" RODASY.10007 – 111.00● RA-25 Top Rod Assy LHR AL=44.801 CL=37.875 DH=83 3/16" RODASY.10008 – 130.00● RA-26 Top Rod Assy LHR AL=42.676 CL=40 DH=83 3/16" RODASY.10009 – 111.00● RA-27 Top Rod Assy LHR AL=41.489 CL=41.25 DH=83 1/4" RODASY.10010 – 111.00● RA-28 Bottom Rod Assy AL=41.877 CL=42.5 RODASY.10011 – 58.00● RA-29 Bottom Rod Assy AL=40.627 CL=41.25 RODASY.10012 – 58.00● RA-30 Bottom Rod Assy AL=37.252 CL=37.875 RODASY.10013 – 58.00● RA-31 Bottom Rod Assy AL=39.377 CL=40 RODASY.10014 – 58.00

REFERENCE NOTES:■ Channel assembly and Filler Plate sizes supplied for field sizing.● Complete rod and latch assembly includes PB24 standard rod and PB23 nut.


37




2390 Series Cylinder Assembly

2390


1 PB343 2390 Cylinder Housing HOUSING.123 P28 each 63.00PB343 2390 Cylinder Housing HOUSING.124 P13 each 63.00PB343 2390 Cylinder Housing HOUSING.125 P35 each 63.00

2 PB332 Mortise Locking Collar 971974-00 – each 9.503 PB339 2390 NL/HB Bracket Assembly BRKTASY.118 – each 31.004 PB333 Mounting Stud 971585-89 – each 8.005 PB351 #10 Countersunk Washer WASHER.120 DC35 10 10.005 PB351 #10 Countersunk Washer WASHER.121 US32D 10 10.006 PB347 10-24 x 1" OPHMS SCREW.1083 US32D 10 11.507 PB346 1/4-20 x 3/8 SHCS SCREW.1082 – 10 11.508 PB337 2390 Rod Lift Bracket BRKT.152 – each 16.009 PB348 1/4-28 x 3/4 SHCS SCREW.1084 – 10 12.5010 PB340 Lift Bracket Kit - 2" Door BRKTASY.155 – each 34.0011 PB349 8-18 x 5/16 UFPHSMS AB Screw SCREW.1085 – each 11.50

Strike/Mullion/TrimStrike


PB49 PB48 Strike Shim SHIM.112 – 10 18.00PB33 Screw 8-32 X 1/2" UFPHMS SCREW.1038 BLACK 25 11.50PB33 Screw 8-32 X 1/2" UFPHMS SCREW.1032 US32D 25 11.50PB50 TD35 Strike Shim SHIM.150 BLACK each 19.00PB51 TD35 Screw 10-32 x 1" FPHMS SCREW.1016 BLACK 25 16.00PB91 TD35 Wear Strip 4270109590 – each 9.00PB92 TD35 Drive Rivet RIVET.101 – 25 24.00

MullionMB10 RM170 Mullion Bracket Pkg 4270108954 – each 73.00MB11 RM150 Mullion Bracket Pkg 4270107489 – each 70.00

TrimPB97 9970 Mounting Stud STUD.102 – 10 23.00

8

1

7

9

10

7

12

26 12

3

168

8

17

9

11

15

20

11

24

25

11

19

18

2

3

4

56

7

27

4

13 6

21

1

10

38






169CA . . . . .31179CA . . . . .33DC1 . . . . . .15DC15 . . . . .15, 19DC16 . . . . .19DC40 . . . . .15, 19DC41 . . . . .19DCX-1 . . . . .20DCX-2 . . . . .15, 19MB10 . . . . .37MB11 . . . . .387PB2 . . . . . . .13, 18PB3 . . . . . . .13, 29, 35PB4 . . . . . . .13, 29, 35PB5 . . . . . . .13, 18, 29PB10 . . . . . .13, 18, 29PB12 . . . . . .13, 18PB13 . . . . . .13, 18PB14 . . . . . .13, 18PB15 . . . . . .13, 18PB17 . . . . . .13, 21,

27, 29, 35PB18 . . . . . .31, 33PB19 . . . . . .31PB20 . . . . . .16PB23 . . . . . .14, 27,

30, 35PB24 . . . . . .14, 30, 35PB25 . . . . . .14, 30PB30 . . . . . .14, 18PB33 . . . . . . 37PB35 . . . . . .14, 29PB38 . . . . . .14, 18PB39 . . . . . .15, 20PB41 . . . . . .26PB42 . . . . . .18PB49 . . . . . .38PB50 . . . . . .38PB51 . . . . . .38PB52 . . . . . .26PB53 . . . . . .18, 27PB54 . . . . . .14, 30PB56 . . . . . .27PB57 . . . . . .27PB58 . . . . . .26PB59 . . . . . .26PB61 . . . . . .18PB62 . . . . . .18PB63 . . . . . .18PB64 . . . . . .18PB77 . . . . . .26PB78 . . . . . .26PB79 . . . . . .27PB81 . . . . . .18PB83 . . . . . .27PB84 . . . . . .27

PB88 . . . . . .14PB89 . . . . . .18PB91 . . . . . .37PB92 . . . . . .37PB97 . . . . . .37PB99 . . . . . .14, 18PB101 . . . . .27PB102 . . . . .27PB103 . . . . .28PB104 . . . . .28PB105 . . . . .28PB106 . . . . .28PB107 . . . . .28PB108 . . . . .28PB114 . . . . .29PB115 . . . . .28PB116 . . . . .28PB117 . . . . .28PB118 . . . . .28PB120 . . . . .28PB121 . . . . .28PB122 . . . . .28PB123 . . . . .31PB124 . . . . .24PB125 . . . . .26PB126 . . . . .26PB127 . . . . .29PB128 . . . . .27PB129 . . . . .14, 27,

30, 35PB130 . . . . .14, 27,

30, 35PB131 . . . . .14, 30, 35PB132 . . . . .14, 30, 35PB133 . . . . .14, 27PB134 . . . . .14, 30, 35PB135 . . . . .26PB136 . . . . .26PB137 . . . . .26PB138 . . . . .26PB139 . . . . .24, 26PB140 . . . . .13, 18, 29PB141 . . . . .29PB176 . . . . .26PB177 . . . . .26PB178 . . . . .26PB179 . . . . .26PB200 . . . . .21PB201 . . . . .21PB202 . . . . .21PB203 . . . . .21PB204 . . . . .21PB205 . . . . .21PB206 . . . . .21, 28PB207 . . . . .21PB208 . . . . .21

PB210 . . . . .21PB211 . . . . .21PB212 . . . . .21PB213 . . . . .21PB214 . . . . .21PB215 . . . . .21PB216 . . . . .24PB217 . . . . .24, 26PB218 . . . . .24, 26PB219 . . . . .21PB220 . . . . .24, 26PB221 . . . . .24, 26PB222 . . . . .24PB223 . . . . .24PB224 . . . . .24PB226 . . . . .24PB227 . . . . .24PB228 . . . . .24PB229 . . . . .24PB230 . . . . .24PB231 . . . . .24PB232 . . . . .24, 29,

33, 35PB233 . . . . .24PB250 . . . . .22PB251 . . . . .22PB260 . . . . .22PB261 . . . . .22PB270 . . . . .22PB271 . . . . .22PB280 . . . . .22PB281 . . . . .22PB300 . . . . .26, 31,

33, 35PB301 . . . . .26, 31,

33, 35PB302 . . . . .26, 31,

33, 35PB303 . . . . .26, 31,

33, 35PB307 . . . . .26PB308 . . . . .26PB310 . . . . .26PB311 . . . . .26PB312 . . . . .29PB313 . . . . .29PB314 . . . . .29, 33PB315 . . . . .30, 33PB316 . . . . .30, 33PB317 . . . . .30PB318 . . . . .30, 33PB319 . . . . .33PB320 . . . . .33PB321 . . . . .30, 33PB322 . . . . .30, 33, 35PB323 . . . . .30, 33, 35PB324 . . . . .30, 33

PB325 . . . . .33PB326 . . . . .33PB327 . . . . .33PB328 . . . . .26, 31, 33PB329 . . . . .33PB330 . . . . .33PB331 . . . . .33PB332 . . . . .37PB333 . . . . .37PB334 . . . . .35PB335 . . . . .35PB336 . . . . .35PB337 . . . . .37PB338 . . . . .30, 35PB339 . . . . .37PB340 . . . . .37PB341 . . . . .35PB342 . . . . .35PB343 . . . . .37PB344 . . . . .34PB345 . . . . .30, 34, 35PB346 . . . . .37PB347 . . . . .37PB348 . . . . .37PB349 . . . . .37PB350 . . . . .35PB351 . . . . .37PB352 . . . . .30, 35PB353 . . . . .31, 33, 35PB355 . . . . .24PB357 . . . . .35PB358 . . . . .35PB359 . . . . .35PB360 . . . . .35PB361 . . . . .35PB362 . . . . .35PB363 . . . . .35PB365 . . . . .35PBX-1 . . . . .15, 19PBX-9 . . . . .36PBX-10 . . . .36PBX-15 . . . .36PBX-16 . . . .30, 33, 35PBX-18 . . . .33PBX-23 . . . .22PBX-24 . . . .22PBX-25 . . . .22PBX-26 . . . .22PBX-27 . . . .29PBX-28 . . . .35PBX-30 . . . .36PBX-31 . . . .36PBX-32 . . . .36PBX-33 . . . .36PBX-34 . . . .36PBX-35 . . . .36

PBX-36 . . . .36PBX-38 . . . .31PBX-39 . . . .31PBX-40 . . . .31PBX-41 . . . .31PBX-50 . . . .24PBX-51 . . . .24PBX-52 . . . .24PBX-53 . . . .24PBX-54 . . . .26PBX-55 . . . .26PBX-56 . . . .26PBX-57 . . . .26PBX-58 . . . .24PBX-59 . . . .24PBX-60 . . . .26PBX-61 . . . .26PBX-62 . . . .26PBX-63 . . . .26PBX-64 . . . .26PBX-65 . . . .26PBX-66 . . . .26PBX-67 . . . .26RA1 . . . . . . .14, 30RA2 . . . . . . .14, 30RA3 . . . . . . .14, 30RA4 . . . . . . .14, 30RA5 . . . . . . .14, 30RA6 . . . . . . .14, 30RA7 . . . . . . .14RA8 . . . . . . .14, 30RA9 . . . . . . .27RA10 . . . . . .27RA11 . . . . . .27RA12 . . . . . .27RA13 . . . . . .27RA14 . . . . . .27RA15 . . . . . .27RA16 . . . . . .35RA17 . . . . . .30RA18 . . . . . .36RA19 . . . . . .36RA20 . . . . . .36RA21 . . . . . .36RA22 . . . . . .36RA23 . . . . . .36RA24 . . . . . .36RA25 . . . . . .36RA26 . . . . . .36RA27 . . . . . .36RA28 . . . . . .36RA29 . . . . . .36RA30 . . . . . .36RA31 . . . . . .36RD9 . . . . . . .14, 18RD10 . . . . . .14, 18

RDX-1 . . . . .20RTR10 . . . . .24RTR11 . . . . .24RTR12 . . . . .24RTR13 . . . . .24SD1 . . . . . . .15SD15 . . . . . .15, 19SD16 . . . . . .19SD40 . . . . . .15, 19SD41 . . . . . .19SD43 . . . . . .14, 18SD45 . . . . . .14SD9 . . . . . . .14, 18SR33 . . . . . .14, 30

INDEX by Model NumberModel No. Page Model No. Page Model No. Page Model No. Page Model No. Page Model No. Page


110388-00 . . . . . .26, 31,33, 35

110741-00 . . . . . .26, 31,33, 35

4230100017 . . . .164270100013 . . . .14, 164270100017 . . . .14, 30,

354270100018 . . . .14, 304270100026 . . . .164270100075 . . . .164270100108 . . . .164270100110 . . . .164270100116 . . . .164270100130 . . . .164270100151 . . . .164270100152 . . . .164270100153 . . . .164270100172 . . . .14, 304270100197 . . . .14, 304270100218 . . . .164270100266 . . . .14, 304270100299 . . . .164270100304 . . . .184270100312 . . . .14, 184270100346 . . . .14, 30,

354270100521 . . . .14, 27,

30, 354270100522 . . . .14, 304270100582 . . . .164270100663 . . . .164270101482 . . . .14, 30,

354270101753 . . . .164270101778 . . . .164270101806 . . . .14, 27,

30, 354270101818 . . . .14, 304270101819 . . . .14, 304270101825 . . . .14, 304270101830 . . . .14, 274270101831 . . . .144270101840 . . . .184270101873 . . . .14, 304270101874 . . . .14, 304270102426 . . . .14, 304270102427 . . . .14, 304270103324 . . . .354270105926 . . . .274270106026 . . . .164270106632 . . . .14, 304270106633 . . . .14, 304270106745 . . . .244270106769 . . . .244270106770 . . . .214270106772 . . . .24

4270106773 . . . .24, 264270106775 . . . .274270106776 . . . .274270106782 . . . .274270106786 . . . .214270106787 . . . .214270106796 . . . .274270106863 . . . .214270106875 . . . .214270106888 . . . .244270106977 . . . .244270106997 . . . .164270107027 . . . .224270107028 . . . .224270107029 . . . .224270107031 . . . .224270107032 . . . .224270107033 . . . .224270107034 . . . .224270107035 . . . .224270107036 . . . .224270107038 . . . .224270107039 . . . .224270107040 . . . .224270107046 . . . .244270107047 . . . .244270107048 . . . .244270107060 . . . .244270107061 . . . .244270107089 . . . .244270107090 . . . .244270707091 . . . .224270107092 . . . .224270107093 . . . .224270107095 . . . .224270107096 . . . .224270107097 . . . .224270107176 . . . .14, 30,

354270107178 . . . .14, 30,

354270107186 . . . .264270107188 . . . .264270107189 . . . .264270107192 . . . .264270107193 . . . .264270107194 . . . .264270107213 . . . .284270107214 . . . .284270107215 . . . .284270107268 . . . .284270107270 . . . .284270107283 . . . .284270107285 . . . .284270107286 . . . .284270107320 . . . .21

4270107321 . . . .214270107322 . . . .214270107323 . . . .214270107341 . . . .264270107342 . . . .264270107360 . . . .264270107361 . . . .264270107363 . . . .264270107422 . . . .244270107429 . . . .264270107430 . . . .264270107489 . . . .384270107495 . . . .274270107497 . . . .274270107520 . . . .244270107521 . . . .244270107587 . . . .224270107588 . . . .224270107589 . . . .224270107591 . . . .224270107592 . . . .224270107593 . . . .224270107603 . . . .244270107623 . . . .264270107685 . . . .224270107686 . . . .224270107687 . . . .224270107688 . . . .224270107689 . . . .224270107691 . . . .224270107703 . . . .224270107704 . . . .224270107705 . . . .224270107706 . . . .224270107707 . . . .224270107709 . . . .224270107712 . . . .224270107713 . . . .224270107714 . . . .224270107715 . . . .224270107716 . . . .224270107718 . . . .224270107787 . . . .284270107791 . . . .274270107833 . . . .284270108348 . . . .164270108426 . . . .274270108763 . . . .264270108954 . . . .374270109003 . . . .274270109005 . . . .284270109006 . . . .284270109007 . . . .284270109009 . . . .284270109077 . . . .274270109078 . . . .27

4270109142 . . . .264270109190 . . . .284270109548 . . . .334270109590 . . . .374270109630 . . . .284270900091 . . . .15, 204270900094 . . . .15, 204270900095 . . . .15, 204270900097 . . . .15, 204270900098 . . . .15, 204270902091 . . . .164270902095 . . . .164270902121 . . . .164270902125 . . . .164270902740 . . . .204270902742 . . . .204270902743 . . . .204270902746 . . . .204270902748 . . . .204270902749 . . . .204270902763 . . . .194270902766 . . . .194270902767 . . . .194270902769 . . . .194270902772 . . . .194270902773 . . . .194270902776 . . . .15, 194270902778 . . . .15, 194270902779 . . . .15, 194270902782 . . . .15, 194270902784 . . . .15, 194270902785 . . . .15, 194270902787 . . . .154270902789 . . . .154270902790 . . . .154270902799 . . . .15, 194270902802 . . . .15, 194270902803 . . . .15, 194270902805 . . . .15, 194270902808 . . . .15, 194270902809 . . . .15, 194270902968 . . . .184270902974 . . . .184270903177 . . . .13, 16,

18, 294299100213 . . . .164299100961 . . . .164299100997 . . . .164299101020 . . . .24969467-89 . . . . . .33971493-76 . . . . . .30, 33,

35971585-89 . . . . . .37971659-79 . . . . . .24971660-79 . . . . . .24971687-00 . . . . . .31, 33,

35

971974-00 . . . . . .37AXLE.1006 . . . . . .35AXLE.1007 . . . . . .24BASEASY.208 . . .26BASEASY.209 . . .26BASEASY.210 . . .26BASEASY.211 . . .26BASEASY.220 . . .26BASEASY.221 . . .26BOLT.1004 . . . . . .30, 35BRKT.128 . . . . . .30, 33BRKT.137 . . . . . .35BRKT.138 . . . . . .29BRKT.143 . . . . . .35BRKT.152 . . . . . .37BRKT.156 . . . . . .31BRKT.478 . . . . . .29BRKTASY.101 . . .14, 30BRKTASY.107 . . .30, 35BRKTASY.118 . . .37BRKTASY.155 . . .37BUMPER.103 . . .21BUSH.102 . . . . . .13, 16,

18, 29BUSH.103 . . . . . .14, 16,

18BUSH.107 . . . . . .27BUSH.108 . . . . . .16BUSH.109 . . . . . .13, 16,

29, 35CAM.102 . . . . . . .13, 16,

18, 29CAMASY.101 . . . .33CASE.209 . . . . . .15, 19CASE.210 . . . . . .15, 19CASE.211 . . . . . .20CASE.213 . . . . . .15, 19CASE.214 . . . . . .15, 19CASE.215 . . . . . .15, 19CASE.216 . . . . . .15, 19CASE.217 . . . . . .15, 19CASE.218 . . . . . .15, 19CASE.220 . . . . . .15, 19CASE.221 . . . . . .15, 19CASE.222 . . . . . .15, 19CASE.223 . . . . . .15, 19CASE.224 . . . . . .20CASE.225 . . . . . .20CASE.226 . . . . . .20CASE.228 . . . . . .20CASE.229 . . . . . .20CASE.230 . . . . . .15, 19CASE.231 . . . . . .15, 19CASE.232 . . . . . .15, 19CASE.233 . . . . . .15, 19CASE.234 . . . . . .20CASE.235 . . . . . .20

CASE.236 . . . . . .20CASE.237 . . . . . .20CASE.238 . . . . . .20CASE.239 . . . . . .20CASE.240 . . . . . .20CASE.241 . . . . . .20CASE.242 . . . . . .20CASE.243 . . . . . .20CBAR.101 . . . . . .15, 20CBAR.102 . . . . . .15, 20CBAR.116 . . . . . .15, 20CBAR.120 . . . . . .15, 20CBAR.132 . . . . . .15, 20CBAR.135 . . . . . .15, 20CBAR.143 . . . . . .15, 20CBAR.148 . . . . . .15, 20CBAR.160 . . . . . .15, 20CBAR.206 . . . . . .15, 20CBAR.207 . . . . . .15, 20CBAR.208 . . . . . .15, 20CBAR.209 . . . . . .15, 20CHASY.107 . . . . .36CHASY.108 . . . . .36CHASY.109 . . . . .36CHASY.125 . . . . .36CHASY.147 . . . . .36CHASY.158 . . . . .36CHASY.160 . . . . .36CHASY.207 . . . . .36COVER.113 . . . . .29COVER.120 . . . . .33COVER.127 . . . . .35CTUBE.232 . . . . .28CYLASY.1083 . . .31CYLASY.1151 . . .33ECAP.103 . . . . . . .22ECAP.111 . . . . . . .22ECAP.129 . . . . . . .30, 33ECAP.130 . . . . . . .29, 3ECAP.143 . . . . . . .35EXT.2244 . . . . . . .36EXT.2289 . . . . . . .31EXT.2294 . . . . . . .31EXT.2298 . . . . . . .31EXT.2303 . . . . . . .31EXT.2304 . . . . . . .31EXT.2323 . . . . . . .31EXT.2324 . . . . . . .31EXT.2333 . . . . . . .31EXT.2334 . . . . . . .31EXT.2338 . . . . . . .31EXT.2339 . . . . . . .31EXT.2340 . . . . . . .31EXT.2341 . . . . . . .31EXT.2345 . . . . . . .31EXT.2349 . . . . . . .31

INDEX by Part NumberPart No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page





EXT.2350 . . . . . . .31EXT.255 . . . . . . . .22EXT.256 . . . . . . . .22EXT.257 . . . . . . . .22EXT.258 . . . . . . . .22EXT.259 . . . . . . . .22EXT.261 . . . . . . . .22EXT.2927 . . . . . . .36EXT.2949 . . . . . . .36EXT.2950 . . . . . . .36EXT.2951 . . . . . . .36EXT.3000 . . . . . . .36EXT.3001 . . . . . . .36EXT.3002 . . . . . . .36EXT.3003 . . . . . . .36EXT.3004 . . . . . . .36EXT.3005 . . . . . . .36EXT.3006 . . . . . . .36EXT.3007 . . . . . . .36EXT.3008 . . . . . . .36EXT.3009 . . . . . . .36EXT.3010 . . . . . . .36EXT.3011 . . . . . . .36EXT.3012 . . . . . . .36EXT.3013 . . . . . . .36EXT.3014 . . . . . . .36EXT.3015 . . . . . . .36EXT.3050 . . . . . . .36EXT.3051 . . . . . . .36EXT.3052 . . . . . . .36EXT.3053 . . . . . . .36EXT.3054 . . . . . . .36EXT.3055 . . . . . . .36EXT.3056 . . . . . . .36EXT.3057 . . . . . . .36EXT.398 . . . . . . . .31EXT.399 . . . . . . . .31EXT.400 . . . . . . . .31EXT.438 . . . . . . . .31EXT.439 . . . . . . . .31EXT.440 . . . . . . . .36EXT.441 . . . . . . . .31EXT.442 . . . . . . . .31EXT.443 . . . . . . . .31EXT.444 . . . . . . . .31EXT.445 . . . . . . . .36EXT.450 . . . . . . . .36EXT.825 . . . . . . . .31EXT.826 . . . . . . . .31EXT.830 . . . . . . . .31EXTROD.1001 . . .35GUIDE.101 . . . . .27GUIDE.102 . . . . .27HOUSING.123 . . .37HOUSING.124 . . .37HOUSING.125 . . .37

HOUSING.218 . . .15HOUSING.225 . . .15HOUSING.226 . . .15HOUSING.229 . . .15HOUSING.230 . . .15HOUSING.231 . . .15HOUSING.237 . . .15HOUSING.238 . . .15KEY.10020 . . . . . .24, 29,

33, 35KEY.101 . . . . . . . .14, 16,

18KEY.102 . . . . . . . .21KIT.1008 . . . . . . . .26KIT.1009 . . . . . . . .26KIT.1010 . . . . . . . .26KIT.1011 . . . . . . . .26KIT.1012 . . . . . . . .26KIT.1013 . . . . . . . .26KIT.1128 . . . . . . . .35KIT.1156 . . . . . . . .31KIT.1157 . . . . . . . .31KIT.1197 . . . . . . . .30, 33,

35LARM.173 . . . . . .15, 19LARM.174 . . . . . .15, 19LARM.175 . . . . . .15, 19LARM.176 . . . . . .15, 19LARM.177 . . . . . .15, 19LARM.178 . . . . . .15, 19LARM.179 . . . . . .15, 19LARM.180 . . . . . .15, 19LARM.181 . . . . . .15, 19LARM.182 . . . . . .15, 19LARM.183 . . . . . .15, 19LARM.184 . . . . . .15, 19LARM.185 . . . . . .15, 19LARM.186 . . . . . .15, 19LARM.187 . . . . . .15, 19LARM.188 . . . . . .15, 19LARM.189 . . . . . .19LARM.197 . . . . . .19LARM.199 . . . . . .19LARM.201 . . . . . .19LARM.203 . . . . . .19LARM.205 . . . . . .19LARM.207 . . . . . .19LARM.208 . . . . . .19LARM.209 . . . . . .19LARM.210 . . . . . .19LARM.211 . . . . . .19LARM.212 . . . . . .19LARM.213 . . . . . .19LARM.214 . . . . . .19LARM.215 . . . . . .19LARM.216 . . . . . .19

LATCHR.102 . . . .26LBOLT.105 . . . . . .33LEVER.103 . . . . .26LEVER.104 . . . . .26LEVER.105 . . . . .26NUT.101 . . . . . . . .14, 27,

30, 35NUT.103 . . . . . . . .26PIN.104 . . . . . . . .14, 16,

18PIN.106 . . . . . . . .13, 18PIN.109 . . . . . . . .14, 16,

30, 35PIN.110 . . . . . . . .14, 16,

30, 35PIN.115 . . . . . . . .13, 16,

18PIN.116 . . . . . . . .18PIN.128 . . . . . . . .30, 33,

35PKG.102 . . . . . . .22PKG.104 . . . . . . .22PKG.105 . . . . . . .22PKG.133 . . . . . . .33PKG.134 . . . . . . .35PKG.135 . . . . . . .35PKG.150 . . . . . . .29PKG.151 . . . . . . .29PLUNGER.101 . .26, 31,

33, 36RETAIN.101 . . . . .14RETAIN.102 . . . . .14, 18RETRACT.101 . . .14, 16,

29RETRACT.102 . . .18RING.108 . . . . . . .16RIVET.101 . . . . . .37ROD.1011 . . . . . .35ROD.1036 . . . . . .35ROD.1043 . . . . . .35ROD.1044 . . . . . .35ROD.1080 . . . . . .35ROD.1082 . . . . . .35RODASY.10001 . .36RODASY.10002 . .36RODASY.10003 . .36RODASY.10004 . .36RODASY.10005 . .36RODASY.10006 . .36RODASY.10007 . .36RODASY.10008 . .36RODASY.10009 . .36RODASY.10010 . .36RODASY.10011 . .36RODASY.10012 . .36RODASY.10013 . .36RODASY.10014 . .36

RODASY.1075 . . .30RODASY.110 . . . .27RODASY.112 . . . .27RRING.102 . . . . .18RRING.103 . . . . .14, 16,

18, 27RRING.104 . . . . .24, 26RRING.105 . . . . .24, 26RRING.109 . . . . .13, 16,

29, 35RRING.112 . . . . .26, 31,

33SCREW.1012 . . .21SCREW.1015 . . .13, 18SCREW.1016 . . .37SCREW.1022 . . .13, 16,

18SCREW.1025 . . .30, 33SCREW.1027 . . .13, 16,

18SCREW.1028 . . .13, 16,

21, 27,29, 35

SCREW.1029 . . .13, 27,29, 35

SCREW.1030 . . .14, 16,18

SCREW.1031 . . .18SCREW.1032 . . .16, 37SCREW.1037 . . .14, 30SCREW.1038 . . .37SCREW.1039 . . .14, 18SCREW.1043 . . .24SCREW.1050 . . .21SCREW.1053 . . .21SCREW.1055 . . .21SCREW.1061 . . .26SCREW.1063 . . .26SCREW.1065 . . .26SCREW.1066 . . .21SCREW.1067 . . .30SCREW.1068 . . .30SCREW.1069 . . .29SCREW.1070 . . .30, 33SCREW.1072 . . .30, 33SCREW.1074 . . .29SCREW.1075 . . .33SCREW.1076 . . .14, 30,

35SCREW.1077 . . .30, 33,

355SCREW.1081 . . .14, 30,

35SCREW.1082 . . .37SCREW.1083 . . .37SCREW.1084 . . .37SCREW.1085 . . .37SCREW.1088 . . .35

SCREW.1099 . . .28SCREW.1105 . . .28SCREW.1114 . . .31, 35SCREW.1121 . . .31, 35,

35SCREW.1136 . . .24, 26SCREW.1141 . . .30, 33,

35SCREW.1143 . . .21, 30,

33SCREW.1150 . . .33SCREW.1282 . . .21SHAFT.101 . . . . .31, 33SHIM.112 . . . . . .16, 37SHIM.150 . . . . . .37SLIDER.101 . . . . . 33SOLENOID.142 . . 26SPACER.107 . . . . 33SPRING.102 . . . .14, 16,

18SPRING.103 . . . .14, 16,

18SPRING.104 . . . .18SPRING.105 . . . .28SPRING.127 . . . .24STUD.101 . . . . . .13, 16,

18STUD.102 . . . . . .37SWITCH.1002 . . .26SWITCH.1004 . . .26SWITCH.1006 . . .31, 33,

35WASHER.102 . . .24, 26WASHER.103 . . .24, 26WASHER.107 . . .24WASHER.108 . . .28WASHER.109 . . .28WASHER.110 . . .28WASHER.113 . . .26WASHER.116 . . .27WASHER.120 . . .37WASHER.121 . . .37WRENCH.101 . . .14, 16,

18

INDEX by Part NumberPart No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page

Price Book 2011 • Effective January 31, 2011 • Rev. 1/11 1

TA B L E O F C O N T E N T S

How to Order Closers ................................. 1Available Finishes........................................ 1Common Applications................................. 2SC Series Options ....................................... 3SC Series Surface Mount ........................... 4

HOw TO OrdEr SC SEriES CLOSErS, COmpONENTS, & ACCESSOriES1. The SC60, SC70 & SC80 Series Closers are each certified to meet the requirements of ANSI Standard A156.4, Grade 1. The SC90 Series

Closers are certified to meet the requirements of ANSI Standard A156.4, Grade 3.

2. All SC Series Closers are available in AL (689) and DKBRZ (695). BRASS(696) may be available but with longer leadtime. Consult factory for details.

3. SC80 Series Closers are shipped with a standard ‘slim cover’ unless an optional ‘full cover’ is specified. SC60 Series Closers are shipped ‘less cover’ unless an optional ‘slim cover’ is specified (SC60 & SC61 only). SC90 Series Closers are shipped ‘less cover’ unless an optional ‘slim cover’ is specified.

4. All SC Series Closers are furnished with a TBWMS fastener pack.

5. All SC60 and SC80 Series Closers are packed with six (6) identical closers per master carton.

SC70 Series Closers are packed with four (4) identical closers per master carton.

HOw TO OrdEr THE OHC100 SEriES CLOSErS, COmpONENTS & ACCESSOriES1. OHC100 Series Closers are available with cylinders that allow either a 90° or 105° of door swing. Please specify at time of order.

2. The OHC100 Series Closer is UL listed.

3. The OHC101 Series Closer is ADA compliant. The OHC100 is not ADA compliant.

4. An OHC100 Series cylinder body will always be DKBRZ.

5. The OHC100 Series would be a retrofit for the following models; Norton 4900, Jackson 20-330, Global TC7000, International 100 or 200 and the Kawneer Husky II.

6. The OHC100 Series ‘A’ Style arm is an ‘end load’ arm, the ‘S’ Style arm is a ‘side load’ arm and ‘VO’ Style is used on doors hung with offset pivots or butt hinges.

FALCON Customer Care & Technical Support Phone (877) 671-7011 or Fax (800) 288-4242

Parts and Components ............................... 5OHC Series Concealed ................................ 68200 Series Auto Operator ......................... 7Warranty ..................................................... 8


AL (BHMA 689) Aluminum

DKBRZ (BHMA 695)Dark Bronze

S T A N D A R D F I N I S H E S

BRASS (BHMA 696) (Extra Lead Time - Consult Factory)

O P T I O N A L F I N I S H

Customers, please refer to IRFASTTRACK Price Book for 24-hour/5-day product availability. Please fax orders to 800-288-4242.



C O m m O N A p p L i C AT i O N S

SC70 Series Heavy Commercial / Exterior DoorCommercial / Interior DoorAluminum Store Front

SC80 Series Medium Commercial / Exterior DoorCommercial / Interior DoorAluminum Store Front

SC60 Series Light-Medium Commercial / Exterior DoorCommercial / Interior DoorAluminum Store Front

SC90 Series Light Commercial / Interior DoorAluminum Store Front

OHC100 Series Medium Aluminum Store FrontRetail

Series Duty Appl icat ions


SC Closer ConfigurationTo meet your unique requirements, SC closers can be configured by selecting specific options.To verify availability of options please contact customer service.

Cylinder Options■ STD (standard cylinder) - Standard cylinder provides a main speed function to control the motion of the

door from maximum opening angle until the door is a few inches from the latch where function controls the final closing motion. The opening swing iscontrolled by the hydraulic backcheck function from about 70˚ to maximum opening angle.

■ DEL (delayed action cylinder) - Special cylinder provides a separate delayed closing motion from maximum opening angle to approximately 70˚. Then themain speed function controls the door motion until the door is a few inches from the latch where latch function controls the final closing motion. Duringthe opening swing, the door is controlled by the hydraulic backcheck function from about 70˚ to maximum opening angle.

Cover Options■ FULL - Cover encloses the closer body and the unused pinion shaft.■ SLIM - Cover encloses the closer body with a cap on the unused pinion shaft.

Arm Options■ Rw/PA (regular arm with parallel arm bracket) - Nonhold-open arm with adjustable

forearm assembly to accommodate a range of door and frame reveal conditions. Includes PA bracket to allow installation in a parallel arm configuration.

■ Hw/PA (hold open arm with parallel arm bracket) - Hold-open arm with adjustable forearm assembly to accommodate a range of door and frame reveal conditions.

■ HD (heavy duty arm) - Heavy-duty, parallel arm for use in high-traffic applications.■ DS (dead stop arm) - Heavy-duty, parallel arm includes a positive mechanical stop

and nonadjustable forearm assembly for high volume traffic or potentially abusive installation conditions.

■ DS/HO (dead stop hold open arm) - Heavy-duty, parallel arm includes a positive mechanical stop and nonadjustable forearm assembly for high volume traffic or potentially abusive installation conditions. Also includes a manually selective hold-open function.

■ SS (Spring N’ Stop) – Extra heavy–duty, forged constructed parallel arm includes an integral spring stop and non-adjustable forearm assembly for high volume traffic or potentially abusive installation conditions.

■ SS/HO (Spring N’ Stop Hold-Open) – Extra heavy–duty, forged constructed parallel arm includes an integral spring stop and non-adjustable forearm assembly for high volume traffic or potentially abusive installation conditions. Also includes a manually selectively hold-open function.

Fastener Pack■ TBWMS (thru bolts with wood machine screws) - Fasteners for installation on wood,

hollow metal or aluminum storefront-type doors. Thru bolts for installations on 1-3/4˝ thick, hollow core doors are included.

ADA Accessibility Requirements■ Closers are preset at the factory or can be configured by the installer to generate less than a 5lb opening force

on a 36˝ wide interior door to comply with the requirements of the ADA law, Sections 4.13.10 and 4.13.11, and ANSI Standard A117.1, Sections 4.13.10 and 4.13.11.

■ Closers with the optional delayed closing cylinder also comply with the additional advisory suggestions of the ADA law, Section A4.13.10, and ANSIStandard A117.1, Section A4.1310.

Rw/PA

Hw/PA

DS

HO/DS

HD

SS

SS/HO


Prices subject to change without noticeFT - Also available through IR FASTTRACK.

COMPLETE CLOSERS

SC60 SeriesSC61 ....................................................................................Rw/PA $190 7SC61....................................................................................Hw/PA 215 7SC61 ....................................................................................HD/PA 215 7SC61..........................................................................................DS 235 9SC61 ...................................................................................DS/HO 260 9SC61 ..........................................................................................SS 305 9SC61....................................................................................SS/HO 339 9Add for; Slim Cover (SLIM) ($15), Delayed Action (DEL) ($22). BRASS (696) finish may be available at an extended lead time (consult factory). IR FastTrack items are available in AL (689) finish only.

SC70 SeriesSC71 ....................................................................................Rw/PA $331 10SC71....................................................................................Hw/PA 356 10SC71 ....................................................................................HD/PA 356 11SC71..........................................................................................DS 376 11SC71 ...................................................................................DS/HO 401 12SC71 ..........................................................................................SS 446 12SC71....................................................................................SS/HO 480 12Full Cover is Standard. Add for; Delay Action (DEL) ($22). BRASS (696) finish may be available at an extended lead time (consult factory). IR FastTrack items are available in AL (689) finish only.

SC80 SeriesSC81 ....................................................................................Rw/PA $263 8SC81....................................................................................Hw/PA 288 8SC81 ....................................................................................HD/PA 288 10SC81..........................................................................................DS 308 10SC81 ...................................................................................DS/HO 333 10SC81 ..........................................................................................SS 378 10SC81....................................................................................SS/HO 412 10SC80 Series Closers ship with 'slim' cover unless 'full' cover is specified.Add for; Full Cover (FC) ($5), Delayed Action (DEL) ($22)BRASS (696) finish may be available at an extended lead time (consult factory). IR FastTrack items are available in AL (689) finish only.

SC90 SeriesSC91, SC93, or SC94..........................................................Rw/PA $135 5SC91 or SC94 .....................................................................Hw/PA 160 5Add for: Standard Cover (STD) ($10) (N/A on SC91)BRASS (696) finish may be available at an extended lead time (consult factory).

SC60 Series

SC80 Series(w/ full cover shown)

SC90 Series(SC91 shown)

SC70 Series

SC SERIES CLOSERS

PRICE LIST

CLOSER SERIES NUMBER

SERIES NUMBER ARM TYPE

ALL PRICES IN U.S. DOLLARS

STANDARDFINISHES

AL (689)DKBRZ (695)

SH WI EP IP GI HN TG

January2011

Adjustable1-5

NEW



5

PARTS & COMPONENTSSC60 SeriesSC61-3071 ........................................................................Cylinder $120 9SC61-3071DEL .......................................................Delay Cylinder 142 9SC60-72........................................................................Slim Cover 15 1SC60-3077/PA.....................................Regular Arm w/PA Bracket 70 3SC60-3049/PA............................................HO Arm w/PA Bracket 95 3SC60-3077HD .........................................Heavy Duty Parallel Arm 95 3SC60-3077DS...........................................Dead Stop Parallel Arm 115 5SC60-3049DS ....................................HO Dead Stop Parallel Arm 140 5SC60-3077SS .................................................Spring 'N Stop Arm 185 5SC60-3049SS ..............................Spring 'N Stop Hold-Open Arm 219 5SC60-18 .............................................Mounting Plate - Top Jamb 27 2SC60-18PA.........................................Mounting Plate - Push Side 27 2SC60-30 .........................................................Cush Shoe Support 18 1SC60-61...........................................................Blade Stop Spacer 20 1SC60-62A .....................................................Offset Auxiliary Shoe 15 1SC70 SeriesSC71-3071 ........................................................................Cylinder $241 12SC71-3071DEL .......................................................Delay Cylinder 263 12SC70-72 .........................................................................Full Cover 20 1SC70-3077/PA.....................................Regular Arm w/PA Bracket 70 3SC70-3049/PA............................................HO Arm w/PA Bracket 95 3SC70-3077HD .........................................Heavy Duty Parallel Arm 95 3SC70-3077DS...........................................Dead Stop Parallel Arm 115 5SC70-3049DS ....................................HO Dead Stop Parallel Arm 140 5SC70-3077SS .................................................Spring 'N Stop Arm 185 5SC70-3049SS ..............................Spring 'N Stop Hold-Open Arm 219 5SC70-18................................................Narrow Frame Back Plate 46 3SC70-18PA .........................................Narrow Top Rail Drop Plate 46 4SC70-30 .........................................................Cush Shoe Support 18 1SC70-61...........................................................Blade Stop Spacer 20 1SC70-62A .....................................................Offset Auxiliary Shoe 15 1SC80 SeriesSC81-3071 ........................................................................Cylinder $178 10SC81-3071DEL .......................................................Delay Cylinder 200 10SC80-72........................................................................Slim Cover 15 1SC80-72FC ....................................................................Full Cover 20 1SC80-3077/PA.....................................Regular Arm w/PA Bracket 70 3SC80-3049/PA............................................HO Arm w/PA Bracket 95 3SC80-3077HD .........................................Heavy Duty Parallel Arm 95 3SC80-3077DS...........................................Dead Stop Parallel Arm 115 5SC80-3049DS ....................................HO Dead Stop Parallel Arm 140 5SC80-3077SS .................................................Spring 'N Stop Arm 185 5SC80-3049SS ..............................Spring 'N Stop Hold-Open Arm 219 5SC80-18 .............................................Mounting Plate - Top Jamb 27 2SC80-18PA.........................................Mounting Plate - Push Side 27 2SC80-30 .........................................................Cush Shoe Support 18 1SC80-61...........................................................Blade Stop Spacer 20 1SC80-62A .....................................................Offset Auxiliary Shoe 15 1SC90 SeriesSC91-3071 ........................................................................Cylinder $65 6SC90-72........................................................................Slim Cover 10 1SC90-3077/PA.....................................Regular Arm w/PA Bracket 70 3SC90-3049/PA............................................HO Arm w/PA Bracket 95 3SC90-18 .............................................Mounting Plate - Top Jamb 27 2SC90-18PA.........................................Mounting Plate - Push Side 27 2

SC60-18SC90-18

(SC94 only)

SC80-18PA

SC70-18

SC70-18PA

SC70-62ASC60-62ASC80-62A

Parts and Components

PRICE LIST




STANDARDFINISHES

AL (689)DKBRZ (695)


SC60-18PASC90-18PA(SC94 only)

SC80-18

January2011

NOTE - SC Series parts may be available in a BRASS (696) finishbut at an extended lead time (consult factory).


OHC100 Series - Overhead Concealed (90° - w/o Hold Open)OHC100 or OHC101 (SO90) ................................................EL-DP $203 16OHC100 or OHC101 (SO90) ....................................................VO* 203 16OHC100 or OHC101 (SO90) ................................................SL/GE 203 16

OHC100 Series - Overhead Concealed (90° - w/ Hold Open)OHC100 or OHC101 (HO90)................................................EL-DP $203 16OHC100 or OHC101 (HO90) ....................................................VO* 203 16OHC100 or OHC101 (HO90)................................................SL/GE 203 16

OHC100 Series - Overhead Concealed (105° - w/o Hold Open)OHC100 or OHC101 (S105).................................................EL-DP $203 16OHC100 or OHC101 (S105) .....................................................VO* 203 16OHC100 or OHC101 (S105).................................................SL/GE 203 16

OHC100 Series - Overhead Concealed (105° - w/ Hold Open)OHC100 or OHC101 (H105) ................................................EL-DP $203 16OHC100 or OHC101 (H105).....................................................VO* 203 16OHC100 or OHC101 (H105) ................................................SL/GE 203 16

OHC100 Closers are Grade 1 and adjustable size 3 to 5.OHC101 Closers are Grade 1 and adjustable size 1 to 3. OHC100 Series Closers utilize a 'Hold-Open' feature within the cylinder assembly.*VO Style offset arm and track available in (AL) (689) or (DKBRZ) (695)

“S”

“A”

“VO”

“FB”

GE Pivot

DP Pivot

PARTS & COMPONENTS

OHC100 SeriesOHC100 or OHC101-S090 .........................Standard 90° Cylinder $178 12OHC100 or OHC101-H090 ......................Hold Open 90° Cylinder 178 12OHC100 or OHC101-S105 .......................Standard 105° Cylinder 178 12OHC100 or OHC101-H105 ....................Hold Open 105° Cylinder 178 12OHC100-FB ...................................Mounting Bracket & Hardware 13 1OHC100-EL .....................................................“A” Style End Load 44 2OHC100-SL ............................................“S” Style Side Load Arm 30 2OHC100-VO..................................“VO” Style Offset Arm & Track* 44 4OHC100-GE ............................................Center Hung Floor Pivot 24 2OHC100-DP ............................................Center Hung Floor Pivot 24 2

OHC100 Series Closers utilize a 'Hold-Open' feature within the cylinder assembly.*VO Style offset arm and track available in (AL) (689) or (DKBRZ) (695)


OHC100 SERIES

PRICE LIST




STANDARDFINISH


January2011

Adjustable1-3

Grade 1

NEW

Adjustable3-5

NEW


8230 Series

8240 Series

FALCON OPERATORS

8230 Series – Falcon8231…………………STD (Pull) $1,975 AL only 41Ships with standard 26” length header. For parts and accessories, see below.

8240 Series – Falcon8242…………………REG (Push) 1,975 AL only 41Ships with standard 26” length header. For parts and accessories, see below.

8310 Series Actuators & Accessories6” Round – Text w/ Logo

8310-852T………. Push Plate, Wall Mount $1998310-869F………..Mounting Box, Flush 1218310-869S………..Mounting Box, Surface 1218310-802………… Weather Ring 17

1 ½” x 4 ¾” Jamb – Text w/ Logo

8310-818T………. Push Plate, Jamb Mount $1298310-819F………..Mounting Box, Flush 298310-819S………..Mounting Box, Surface 29

Wireless Transmitters & Receiver

8310-844……….... Transmitter, Wall Mount $1488310-844J……….. Transmitter, Jamb Mount 1488310-861 …………Transmitter, Handheld 1488310-865………..... Receiver 155

8310-852T

8310-818T

8310-844

8310-865

8200 Parts List8230 Series

8230-3077T ................................Standard Arm $1758230-3077PLCM..........Standard Arm w/Track 2258230-3038................................................Track 608230-72MC ..................................Metal Cover 3508230-MS........................................Screw Pack 208230-3018............................Mounting Bracket 2308230-3034 ....................................Track Roller 158230-3155 ..........................................Label Kit 198230-3454 ..............Motor Gearbox Assembly 1,5968230-3462 ....................................Control Box 9998230-3498-2A ......................A/C Power Cable 35

8240 Series

8240-3077 ....................................Regular Arm $1508240-72MC ..................................Metal Cover 3508240-MS........................................Screw Pack 208240-3018............................Mounting Bracket 2308240-79......................................................Rod 408240-77 ............................................Main Arm 1258240-3155 ..........................................Label Kit 198240-3454 ..............Motor Gearbox Assembly 1,5968240-3462 ....................................Control Box 9998240-3498-2A ......................A/C Power Cable 35


NOTE - Additional actuators and accessories are available through LCN - pleasesee the LCN Price List.

8200 SERIES AUTOMATIC OPERATOR

PRICE LIST




FINISH

AL (689)


January2011


121 West Railroad AvenuePrinceton, IL 61356

WARRANTYFalcon warrants its products manufactured to be free from defects in materials and workmanship for a period of ten (10) years from the date of manufacturer, except for the OHC100 products, which have a five (5) year limited warranty (see Tablebelow for warranty periods).

PRODUCTS YEARS

SC60, SC70, SC80 AND SC90 SURFACE CLOSERS 10 YEARS

OHC100 CONCEALED CLOSERS 5 YEARS

8230/8240 SERIES OPERATORS 1 YEAR

This limited warranty does not cover products that (i) are not the proper size for the application; (ii) are not installed in accordance with Falcon published installation instructions; (iii) are installed with improper or incorrect parts [Note: It is recommended that the products be installed with the Falcon fasteners provided with the product.]; (iv) have been, in theopinion of Falcon, modified, repaired, or altered in any way without the express written consent of Falcon; (v) are used for purposes which they are not designed or intended; or (vi) are subjected to misuse, abuse, negligence, or accident. The following costs and expenses are not covered by the provisions of this limited warranty: (i) labor costs for the removal and reinstallation of products; (ii) shipping and freight expenses required to return products to Falcon; (iii) normal maintenance; and (iv) economic losses.

Falcon will replace the products which, in the opinion of Falcon, are found to be defective, provided said products are returned to Falcon, Warranty and Replacement Department, 121 West Railroad Avenue, P.O. Box 100, Princeton, Illinois USA61356-0100.

FALCON SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES FOR ANY CLAIM WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

This limited warranty is in place of all other warranties, expressed or implied, and excludes any warranties of fitness for a particular purpose or merchantability. No agent, representative, dealer, or employee of Falcon has the authority to increase or alter the obligations of this limited warranty.

Note: Should the Product be considered a “consumer product” as may be covered by the Magnuson-Moss Federal Warranty Act,please be advised that: (1) Some states do not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations may not fully apply; and (2) This warranty gives specific legal rights and a user may have other rights which may vary from state to state.

© 2011 Ingersoll Rand FA-5137 Rev. 1/11 Printed in U.S.A.

877-671-7011 www.falcon.ingersollrand.com www.ingersollrand.com

Ingersoll Rand's Security Technologies Sector is a leading global provider of products and services that make environments safe, secureand productive. The sector's market-leading products include electronic and biometric access-control systems; time-and-attendance andpersonnel scheduling systems; mechanical locks; portable security; door closers, exit devices, architectural hardware, and steel doors andframes; and other technologies and services for global security markets.

falcon price book 2011

Documents