fae series

12
Catalog FAE-09 ISO CYLINDERS (ISO 6432 & CETOP RP52P) FAE Series Prices effective Prices effective September 1, 2011 September 1, 2011

Upload: vuonghanh

Post on 01-Jan-2017

247 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: FAE Series

Catalog FAE-09

ISO CYLINDERS (ISO 6432 & CETOP RP52P)

FAE Series

Prices effectivePrices effectiveSeptember 1, 2011September 1, 2011

Page 2: FAE Series

Page 2

FAE SeriesISO Cylinders (ISO6432 & CETOP RP52P)

Features

1. Magnetic piston is standard in all sizes.

2. Stainless steel barrel insures long life and corrosion resistance for ø12 to ø25 bores. Anodized aluminum barrel for ø32 to ø40 bores.

3. Anodized aluminum end covers for corrosion resistance.

4. Wide range of models allow selection for many applications.

5. Mounting nut furnished on all sizes.

6. Machined male rod thread with jam nut is standard on all sizes.

7. ø32 and ø40 bores offered as extended sizes with similar features.

10-13-09Specifi cations and prices subject to change without notice or incurring obligation.

150 psi max.

Conversionspsi = kgf/cm2 x 14.2psi= MPa x 145inch = mm x 0.0394lb force = N x 0.22lbf.in = J x 8.85Force lb = psi X in2 N = lbf X 4.45

Action Double acting single rod / Double acting double rodBore (mm) ø12, ø16, ø20, ø25, ø32, ø40Operating media Compressed airMin. operating pressure 0.07Mpa(0.7kgf/cm2)10psiMax. operating pressure 1.0Mpa(10.5kgf/cm2)150psi

Piston speed range ø12~ø25: 50 – 1500mm/sec (1.97-59 in/sec) ø32 & ø40: 50 – 500mm/sec (1.97-19.7 in/sec)

Ambient & media –10°C(14°F) ~ +70°C(158°F) fi ltered dry air temperature required at temperatures below 0°C (32°F)

Cushion ø12~ø25: Rubber cushion standard ø16 ~ ø25: Air cushion option ø32~ø40: Adjustable air cushion standard Lubrication None required or use ISO VG32

Stroke tolerance (mm) +1.4 / – 0

Push Pull

Bore (mm) Rod Dia (mm) cm2 in2 cm2 in2

12 6 1.1 .17 .8 .13

16 6 2.0 .31 1.7 .26

20 8 3.1 .49 2.6 .40

25 10 4.9 .76 4.1 .63

32 12 8.0 1.25 6.9 1.06

40 16 12.6 1.95 10.6 1.64

Effective Piston Areas

Page 3: FAE Series

Page 3

FAE Series ConstructionISO Cylinders (ISO6432 & CETOP RP52P)

10-20-09 Specifi cations and prices subject to change without notice or incurring obligation.

Magnetic piston & position sensor information (also see page 10)

• Mounting – Magnetically operated reed switches and electronic sensors can be mounted anywhere along the length and circumference of the cylinder.

• Reliability – The annular piston magnet is permanently bonded into a groove in the piston. It is a polarized permanent magnet of rubber bonded barium ferrite that is very stable and is not affected by shock. Under normal usage it will remain magnetized indefi nitely.

• Warning – External magnetic fi elds and/or ferrous objects may affect the strength of the piston magnet therefore affecting sensor actuation and piston position indication.

• Warning – Do not exceed sensor ratings. Permanent damage to sensor may occur. Power supply polarity MUST be observed for proper operation of sensors. See wiring diagrams included with each sensor.

Parts list

ø12~ ø25 BoresFeature stainless steel barrel and rolled assembly with end caps

ø32, ø40 BoresFeature aluminum barrel threaded to end caps

Nitrile - Buna NNitrile - Buna N

Acetal

Rubber bonded barium ferrite

Aluminum alloy (anodized)

Aluminum alloy (anodized)

BearingSnap ring

Oil fi lled bronze

Nitrile - Buna N

Plated steelPlated steel

Plated steel

Stainless steel

Carbon steelCarbon steel

Hex socket head screwHex nut

Washer

Stainless steel / Aluminum

Page 4: FAE Series

Page 4 10-20-09

ISO Cylinders (ISO6432 & CETOP RP52P)

FAE Series

Specifi cations and prices subject to change without notice or incurring obligation.

C

P

W

Universal

Double rod

Nose mount

Series Cushion Type Bore (mm) Stroke (mm) Mounting

FAE 10020 x

Rubbercushion

Aircushionboth ends Front fl ange

Spherical rod end

Foot bracket

Clevis base bracketand pin

Rear fl ange

Position Sensors Ordering Example

F

L

S

P

G

Y

ø12

ø40

ø32

ø25

ø20

ø16

25 ~ 500

10 ~ 300

10 ~ 200

See standard strokes available on page 2. For longer or cus-tom strokes consult factory.

* Note: Universal type features threaded nose, threaded rear and rear pivot mounts.

* Note: Leave blank for universal type.

Note:

* Leave blank for standard rubber cushion.

C (air cushion) is standard feature on ø32 & ø40 bores. (Include in model number.)

C is not available on ø12 bore.Add $11.70 to prices on ø16, ø20 & ø25.

Cylinders, sensors and accessory items must be ordered as separate line items.

9-2A197 Series – Quick Disconnect

Sensor Shown

949 Series – 1/4" Dovetail Sensors

Magnetically operated reed switches and electronic sensors can be mounted anywhere along the length and circumference of the cylinder barrel between the end covers.

Order sensors, mounting method and cord sets separately. See page 10.

(2) Sensor with 9 foot leadwire

(1) Model number FAE 25 x 50

Double acting, single rod, Universal type cylinder with 25mm bore and 50mm stroke.

(2) Part number 9-2A197-1031 Sourcing PNP electronic sensor with a 9 ft lead wire. See details on page 10.

(3) Part number 800-A00-000 Band Clamp for clamp on sensor.See details on page 10.

pherical rod end

(3) Band clamp

(2) Sensor

ø32 & ø40 bores offered as extended sizes with similar features.

949 Series – 1/4" Dovetail Sensors

See individual prices & dimensions on page 11.Option price adders are opposite on page 5.

Magnetic piston is standard in all sizes.

Rod clevis and pin

Page 5: FAE Series

Page 58-11-11

ISO Cylinders (ISO6432 & CETOP RP52P)

FAE Series Prices

Specifi cations and prices subject to change without notice or incurring obligation.

Prices – Cylinders (Double Rod 'W" type )

WeightModel # (kg) PriceFAEW12 10 .....0.102 ....$35.35 25 .....0.112 ......36.15 40 .....0.121 ......37.40 50 .....0.127 ......38.20 80 .....0.146 ......40.25 100 ...0.158 ......41.50 125 ...0.174 ......42.90

FAEW16 10 .....0.116 ....$36.75 25 .....0.127 ......38.80 40 .....0.138 ......39.45 50 .....0.145 ......40.85 80 .....0.167 ......43.50 100 ...0.181 ......44.95 125 ...0.199 ......47.00

FAEW20 10 .....0.215 ....$39.45 25 .....0.233 ......40.85 40 .....0.250 ......42.25 50 .....0.262 ......43.50 80 .....0.297 ......46.35 100 ...0.321 ......47.60 125 ...0.351 ......50.45 160 ...0.392 ......53.70 200 ...0.439 ......57.15 250 ...0.498 ......61.90 300 ...0.557 ......66.80

FAEW25 10 .....0.304 ....$44.30 25 .....0.332 ......45.55 40 .....0.360 ......47.00 50 .....0.378 ......47.60 80 .....0.433 ......51.10 100 ...0.470 ......53.15 125 ...0.516 ......55.15 160 ...0.580 ......59.85 200 ...0.654 ......62.70 250 ...0.746 ......68.00 300 ...0.838 ......72.90

WeightModel # (kg) PriceFAECW32 10 ....0.422 ...$66.80 15 ....0.435 .....66.80 20 ....0.447 .....68.65 25 ....0.460 .....68.65 30 ....0.472 .....70.50 40 ....0.497 .....70.50 50 ....0.522 .....72.35 60 ....0.547 .....74.25 75 ....0.584 .....76.05 80 ....0.596 .....76.05 100 ..0.646 .....77.90 125 ..0.708 .....81.65 150 ..0.771 .....87.20 160 ..0.795 .....89.05 175 ..0.832 .....90.95 200 ..0.894 .....94.60 250 ..1.01 .....100.15 300 ..1.14 .....105.75 320 ..1.19 .....109.45 350 ..1.27 .....113.20 400 ..1.40 .....120.60 450 ..1.52 .....152.15 500 ..1.64 .....161.40

FAECW40 10 ....0.726 ...$76.05 15 ....0.746 .....76.05 20 ....0.767 .....77.90 25 ....0.787 .....77.90 30 ....0.808 .....79.80 40 ....0.849 .....79.80 50 ....0.890 .....81.65 60 ....0.930 .....83.50 75 ....0.992 .....85.35 80 ....1.01 .......85.35 100 ..1.09 .......89.05 125 ..1.20 .......94.60 150 ..1.30 .......98.35 160 ..1.34 .....100.15 175 ..1.40 .....102.05 200 ..1.50 .....105.75 250 ..1.71 .....111.30 300 ..1.91 .....116.85 320 ..2.00 .....120.60 350 ..2.12 .....124.30 400 ..2.32 .....131.70 450 ..2.53 .....166.95 500 ..2.73 .....176.25

Prices – Cylinders (Universal & Nose mount "P" type) WeightModel # (kg) PriceFAE12 10 ..... 0.089 ..... $25.25 25 ..... 0.095 ....... 25.85 40 ..... 0.101 ....... 26.70 50 ..... 0.105 ....... 27.30 80 ..... 0.117 ....... 28.75 100 .... 0.125 ....... 29.60 125 .... 0.135 ....... 30.65 160 .... 0.136 ....... 32.15 200 .... 0.146 ....... 33.55FAE16 10 ..... 0.103 ..... $26.25 25 ..... 0.110 ....... 27.70 40 ..... 0.118 ....... 28.20 50 ..... 0.123 ....... 29.20 80 ..... 0.138 ....... 31.10 100 .... 0.148 ....... 32.15 125 .... 0.160 ....... 33.55 160 .... 0.178 ....... 35.45 200 .... 0.198 ....... 37.50FAE20 10 ..... 0.187 ..... $28.20 25 ..... 0.199 ....... 29.20 40 ..... 0.211 ....... 30.20 50 ..... 0.219 ....... 31.10 80 ..... 0.242 ....... 33.15 100 .... 0.252 ....... 34.00 125 .... 0.278 ....... 36.05 160 .... 0.306 ....... 38.40 200 .... 0.337 ....... 40.85 250 .... 0.377 ....... 44.20 300 .... 0.416 ....... 47.70 350 .... 0.456 ....... 51.10 400 .... 0.495 ....... 54.45 450 .... 0.535 ....... 57.35 500 .... 0.574 ....... 60.85 FAE25 10 ..... 0.257 ..... $31.65 25 ..... 0.276 ....... 32.55 40 ..... 0.294 ....... 33.55 50 ..... 0.306 ....... 34.00 80 ..... 0.344 ....... 36.50 100 .... 0.368 ....... 37.95 125 .... 0.399 ....... 39.40 160 .... 0.442 ....... 42.75 200 .... 0.491 ....... 44.80 250 .... 0.553 ....... 48.55 300 .... 0.614 ....... 52.10 350 .... 0.676 ....... 55.45 400 .... 0.737 ....... 56.40 450 .... 0.799 ....... 57.35 500 .... 0.860 ....... 66.10

WeightModel # (kg) PriceFAEC32 10 ........0.352 ...$63.00 15 ........0.360 .....63.00 20 ........0.368 .....64.80 25 ........0.376 .....64.80 30 ........0.384 .....66.50 40 ........0.400 .....66.50 50 ........0.416 .....68.25 60 ........0.432 .....70.05 75 ........0.456 .....71.75 80 ........0.464 .....71.15 100 ......0.496 .....73.50 125 ......0.536 .....77.00 150 ......0.576 .....82.25 160 ......0.592 .....84.00 175 ......0.616 .....85.80 200 ......0.656 .....89.25 250 ......0.736 .....94.50 300 ......0.816 .....99.75 320 ......0.848 ...103.25 350 ......0.896 ...106.80 400 ......0.976 ...113.75 450 ......1.06 .....143.55 500 ......1.14 .....152.25FAEC40 10 ........0.598 ...$71.25 15 ........0.611 .....71.75 20 ........0.623 .....73.50 25 ........0.636 .....73.50 30 ........0.649 .....75.30 40 ........0.674 .....75.30 50 ........0.699 .....77.00 60 ........0.724 .....78.75 75 ........0.762 .....80.55 80 ........0.775 .....80.55 100 ......0.825 .....84.00 125 ......0.888 .....89.25 150 ......0.951 .....92.75 160 ......0.976 .....94.50 175 ......1.01 .......96.30 200 ......1.08 .......99.75 250 ......1.20 .....105.00 300 ......1.33 .....110.25 320 ......1.38 .....113.75 350 ......1.46 .....117.30 400 ......1.58 .....124.25 450 ......1.71 .....157.50 500 ......1.83 .....166.25

Price adder: $11.70 for option "C" air cushions available on ø16~ ø25 bores. Standard on ø32 & ø40 bores. For longer or custom strokes consult factory.

Price adder: $11.70 for option "C" air cushions available on ø16~ ø25 bores. Standard on ø32 & ø40 bores. For longer or custom strokes consult factory.

All weights are estimates .(kg) See individual parts and accessory prices & dimensions on page 11.

OPTION – Prices FAE12 FAE16 FAE20 FAE25 FAEC32 FAEC40

"L" for Universal and Weight . . . Price Weight . . . Price Weight . . .Price Weight . . .Price Weight . . . Price Weight . . . PriceDouble Rod Types –Includes2 brackets & 2 nuts. 0.105 . . . . . $4.55 0.105. . . . . . $4.55 0.210. . . . . $5.25 0.210 . . . . . $5.25 0.24 . . . . . . $6.30 0.45 . . . . . . . $7.70“L” for Nose Mount Type-1 bracket only. 0.04 . . . . . . 2.30 0.04 . . . . . . 2.30 0.095. . . . . .2.65 0.095 . . . . . .2.65 0.11 . . . . . . . 3.15 0.2 . . . . . . . 3.90“F” for all Types-1 fl ange only 0.025 . . . . . 2.30 0.025. . . . . . 2.30 0.09 . . . . . .2.65 0.09. . . . . . .2.65 0.11 . . . . . . . 3.90 0.2 . . . . . . . 6.50“G” for Universal Type-1 fl ange only. 0.025 . . . . . 2.30 0.025. . . . . . 2.30 0.09 . . . . . .2.65 0.09. . . . . . .2.65 0.11 . . . . . . . 3.90 0.2 . . . . . . . 6.50“S” for Universal Type-1 clevis bracket and pin. 0.04 . . . . . . 4.75 0.04 . . . . . . 4.75 0.085. . . . . .5.45 0.085 . . . . . .5.45 0.16 . . . . . . 10.85 0.3 . . . . . . . 11.40

ACCESSORY – Prices FAE12 FAE16 FAE20 FAE25 FAEC32 FAEC40

Weight . . . Price Weight . . . Price Weight . . . Price Weight . . . Price Weight . . . Price Weight . . . Price“Y” for all Types-Rod clevis and pin. 0.02 . . . . . . $5.50 0.02 . . . . . . $5.50 0.05. . . . . . .$6.55 0.10 . . . . . $10.95 0.10. . . . . .$10.95 0.15 . . . . . $13.15“P” for all Types-Spherical rod end. 0.025. . . . . . 12.95 0.025. . . . . . 12.95 0.045 . . . . . .13.65 0.07 . . . . . . 15.95 0.07. . . . . . 15.95 0.11 . . . . . .18.20

Page 6: FAE Series

Page 6

FAE Series Dimensions (mm)ISO Cylinders (ISO6432 & CETOP RP52P)

Universal TypeBasic Model ø12~ ø25 Bores

Features threaded nose, threaded rear & rear pivot mounts.

Dimensions in (_ _) are for Air Cushion Models

Universal TypeAir Cushion Model ø16~ ø25 Bores Dimensions are in (_ _)

Universal TypeAir Cushion Model ø32, ø40 Boresoffered as extended sizeswith similar features

Bore

Ø32Ø40

XC

120129

ZZ

152165

S

7484

AM

2224

øND

2430

øC

1216

WH

3029

Z

142153

F

2020

G

1013

RR

1012

J

78

K

109

G1

910

BE

M24x1.5M30x1.5

KK

M10x1.25M12x1.25

N1

1718

U

1616

øCD

1012

EW

1620

KV

3241

SW

1719

KW

1010

T

67

øD

4049

EE

1/8PT

1/8PT

NA

3746

Bore

Ø12

Ø16

Ø20

Ø25

AM

16

16

20

22

EW

12

12

16

16

BE

M16x1.5

M16x1.5

M22x1.5

M22x1.5

øC

6

6

8

10

øCD

6

6

8

8

EE

M5x0.8

M5x0.8

G 1/8"

G 1/8"

øD

19.7

19.8

27.9

33.4

F

17

17

20

22

KW

8

8

11

11

N1

12.5

11.5

16.5

16.5

N2

10.5

11.5

16.5

20

S

50

56

68

69.5

XC

75

82

95

104

Z

91

98

115

126

ZZ

105

111

132

141.5

KV

24

24

32

32

G1

8

6(5.5)8.5

8

G2

6

6(5.5)8.5

11

H

38

38

44

50

KK

M6x1.0

M6x1.0

M8x1.25

M10x1.25

WA

9

13.2

12.5

WA1

9

13.2

16

WB

6.6

8

10.25

NA

18.3

18

24

30

øND

16

16

22

22

RR

14

13

17

15.5

SW

10

10

13

17

U

9

9

12

12

WH

22

22

24

28

ZZ + Stroke

Z + Stroke

S + Stroke

AM N1 N2

XC + Stroke

WA

G1 WB

WA1

G2

øC

Air cushion adjuster

H F

U

F

T

G Flats x J Length

K

ZZ + Stroke

Z + Stroke

S + Stroke

XC + StrokeG2G1

N1

WH

KWAM

EE EE

N2

øNDh8

øC

SWKK

BE

KV

BE

øCDH9

øD

NA

NA

øNDh8

EWd13

RR

N1

G Flats

RRXC + Stroke

G1G1

N1WH

KW

AM

T EE EE

øND

F øND

øCD

BE

U

EW

NA

NA

øDøC J

K

KKBE

KV

SW

ZZ + Stroke

Z + Stroke

S + Stroke

Specifi cations and prices subject to change without notice or incurring obligation.

T

5

5

7

8

K

5

5

4

6

J

6

6

G

7

9

10-19-09

Page 7: FAE Series

Page 7

ISO Cylinders (ISO6432 & CETOP RP52P)

FAE Series Dimensions (mm)

10-19-09

Front Flange Mount (F) & Rear Flange Mount (G)

Foot Mount (L)

Rear Pivot Mount (S)

LS + Stroke

XL + Stroke AO

LT

XS AV

W

LT

4-ØAB

US

TR

UR

NH

Specifi cations and prices subject to change without notice or incurring obligation.

WL + StrokeFTFTW

TF

UF

FBH13UR

4-øFB

URR

ø12 ~ ø25 ø32 & ø40

ø32, ø40 Bores offered as extended sizes with similar features

Alternate position

XC + Stroke

LT

AE

AU

NH

øCD

TRAOLG

2-øAB

DRear Pivot

Page 8: FAE Series

Page 8 10-16-09

Nose Mountø12 ~ ø40 boresFeatures threaded nose,short overall length.

S + Stroke

N2N1

WBG3G1

WA WA1

Nose Mount Air Cushion Modelø16 ~ ø40 bores

ISO Cylinders (ISO6432 & CETOP RP52P)

FAE Series Dimensions (mm)

S + Stroke

EE

NA

F

NA

EE G2

N2

G1

Z + Stroke

N1

H

KW

AM

øC

KK

SW BE

KV WHøND

øD

Specifi cations and prices subject to change without notice or incurring obligation.

ø32, ø40 Bores offered as extended sizes with similar features

Foot Mount (L)LT

2-ØAB

US

TR

URNH

W

AO AV

XSAlternate position

G Flats x J Length

K

T

Air cushion adjuster

Front Flange Mount (F)FBH13

UR

UF

TF

FTW

URR

4-øFB

ø12 ~ ø25 ø32 & ø40

Page 9: FAE Series

Page 9

Double Rodø12 ~ ø40 boresFeatures threaded nose at both ends.

Double Rod Air Cushion Modelsø16 ~ ø40 bores Dimensions are in (_ _)

10-19-09

Front Flange Mount (F)

Foot Mount (L)

LT

USTR

URNH

W

AO

AVXS

LT

LS + StrokeXL + Stroke

4-øAB

ISO Cylinders (ISO6432 & CETOP RP52P)

FAE Series Dimensions (mm)

KK

SWEE

BE

KV

EE BE KK

NA

WH

H

AM

N1F

KW

H + Stroke

AM

FN1

NA

G1 G1 WH + Stroke

øC

ZZ + StrokeS + Stroke

øC

øNDh8

øD

G Flats x J Length

K

N1 N1

WAG1

WAG1

WB WB

ZZ + Stroke

S + Stroke

Air cushion adjuster

Specifi cations and prices subject to change without notice or incurring obligation.

ø32, ø40 Bores offered as extended sizes with similar features

FTFBH13

UR

UF

TF

W

URR

4-øFB

Dimensions in (_ _) are for Air Cushion Models

ø12 ~ ø25ø32 & ø40

Page 10: FAE Series

Page 10

Position Sensors for FAE SeriesISO Cylinders (ISO6432 & CETOP RP52P)

Specifi cations and prices subject to change without notice or incurring obligation.

32(1.26)

34(1.34)

8.5(.33)

9.8(.39)

Sensor

Pigtail

1, 2 or 5

Meter Cable

8-25-11

*Quick disconnect style sensors are supplied with male connector. Order female cordsets separately from the first chart below.

Dovetail Style Magnetic Position Sensors – Temperature range: –4° to +176°F (–20° to +80C)

Band Clamp for Clamp On Sensors (must be ordered separately) Part No. 800-A00-000 Price: $8.10

Sensor slides into extruded aluminum rail and

is locked in place with a screw.

Part No. Price

CFC-1M $15.05 CFC-2M 16.85CFC-5M 21.30

Cordset Length

1 Meter2 Meters5 Meters

Female Cordsets for Quick Disconnect Sensors

Band Clamp Adapter for Dovetail Sensors

Part No. 900-300-000 Price: $8.55

Dovetail mounting rail must be ordered separately.Order by Part No. “ER – length” where the length is known, or by “ER – cylinder model no.” Example: “ER-FAE 25 x 25” the model number of cylinder allows factory to determine the length needed. (Estimated length for pricing purposes is “stroke + 1") Price: $3.10 + $1.10 per inch length.

Application recommendations:a) Clean cylinder body O.D. with acetone. Remove all oil from surface.b) Do not apply the rail over the crimped body edge.c) Double check positioning of the rail.d) High performance double sided tape offers convenient “peel and stick” but is very aggressive, giving you only one chance. Be careful !e) Remove protective film from tape and place rail in desired position.f) Firmly press the rail to cylinder body.

Alternatively, the extruded aluminum rail can be fastened using Loctite® U-05FL urethane adhesive or similar. Follow product manufacturer's recommendations for application.

Encased in a plastic housing, dovetail style sensors are corrosion resistant. 60° wire outlet allows close mounting.

Mounting Method #1Sensor is fastened to the cylinder barrel with a band clamp that is not included with sensor and must be ordered separately.

Mounting Method #2Sensor(s) slide into an adhesive backed mounting rail having twin dovetail slots. Sensors are locked with set screws. Rail is supplied with double sided tape affixed.

*Note: Quick disconnect styles are supplied with 6 inch pigtail with male connector. Order female cordsets separately from chart below.

Dovetail Style Sensor Selection Guide Sensor Type

Reed (No LED) Reed (LED)

Electronic (LED)Electronic (LED)

Prewired 9 ft. LeadwirePart No. Price

949-000-001 . . . . $18.95949-000-002 . . . . . 19.80949-000-031 . . . . . 25.00949-000-032 . . . . . 25.00

Electrical Characteristics

0-120 VDC/VAC, 0.5 Amp Max current, 5 Watt Max, 0 Voltage Drop5-120 VDC/VAC, 0.03 Amp Max current, 4 Watt Max, 2.0 Voltage DropSourcing PNP 6-24 VDC, 0.20 Amp Max current, 0.5 Voltage DropSinking NPN 6-24 VDC, 0.20 Amp Max current, 0.5 Voltage Drop

Quick Disconnect*Part No. Price

949-000-301 .....$26.95949-000-302 ......27.60949-000-331 .......32.85949-000-332 .......32.85

Clamp-on Style Magnetic Position Sensors – Temperature range: –4° to +176°F (–20° to +80C)Available in pre-wired and quick-disconnect styles

Prewired style sensors are supplied with a 9 foot leadwire.

Sensor Type

Reed (LED) Electronic (LED)Electronic (LED)

Electrical Characteristics

5-120 VAC/VDC, 0.5 AMP Max, 10 Watt Max, SPST N.O. 3.5 voltage dropSourcing, PNP, 6-24 VDC, 0.5 Amp Max, 1.0 voltage dropSinking, NPN, 6-24 VDC, 0.5 Amp Max, 1.0 voltage drop

Clamp on Style Sensor Selection Guide Prewired 9 ft. LeadwirePart No. Price

9-2A197-1003. . . .$31.409-2A197-1031. . . . .33.659-2A197-1032. . . . .33.65

Quick Disconnect*Part No. Price

9-2A197-1303 .....$40.459-2A197-1331 .......43.159-2A197-1332 .......43.15

Page 11: FAE Series

Page 11

Accessories for FAE SeriesISO Cylinders (ISO6432 & CETOP RP52P)

Specifi cations and prices subject to change without notice or incurring obligation.

H B

G

ØF

A

CID

ØJ

E

X Flats

Spherical rod end

Rod clevis and pin

Front fl angeRear fl ange

Bore Part No. . . . . Price ø12, ø16 FAE 12-053 . . $2.30 ø20, ø25 FAE 20-053 . . 2.65 ø32 FAE 32-053 . . 3.90 ø40 FAE 40-053 . . 6.50

Clevis base bracketand pin

Bore Part No. . . . Price ø12, ø16 FAE 12-062A $4.75 ø20, ø25 FAE 20-062A 5.45 ø32 FAE 32-062A 10.85 ø40 FAE 40-062A 11.40

Bore . . . . . .Part No. . . . . . .Price ø12, ø16. . . FAE 12-057A . . . .$5.50 ø20. . . . . FAE 20-057A . . . . .6.55 ø25, ø32. . . FAE 25-057A . . . .10.95 ø40. . . . . FAE 40-057A . . . .13.15

Nose mount nut Rod nut

Foot bracket

Bore Part No. . . . . Price ø12, ø16 FAE 12-052 . . $2.30 ø20, ø25 FAE 20-052 . . .2.65 ø32 FAE 32-052 . . .3.15 ø40 FAE 40-052 . . .3.90

Prices – Individual Parts & Accessories

9-19-11

Rod clevis and pin (Y)ISO 8140

Spherical rod end (P)DIN 648DIN 24335

I

Thread Bore . . . . Part No. . . . . Size.. . . . Price ø12, ø16 . . . FAE 12-040 . . . M16x1.5. . . $1.25 ø20, ø25 . . . FAE 20-040 . . . M22x1.5. . . . 1.40 ø32 . . . . . FAE 32-040 . . . M24x1.5. . . . 1.60 ø40 . . . . . FAE 40-040 . . . M30x1.5. . . . 2.30

Thread Bore . . . . Part No. . . . . .Size. . . . . Price ø12, ø16 . . . FAE 12-140 . . . .M6x1.0 . . . $0.35 ø20 . . . . . FAE 20-140 . . . M8x1.25. . . . 0.55 ø25, ø32 . . . FAE 25-140 . . .M10x1.25 . . . 0.55 ø40 . . . . . FAE 40-140 . . .M12x1.25 . . . 0.90

Bore . . . . Part No. . . . . Price ø12, ø16 . . . FAE 12-061 . . . $12.95 ø20 . . . . . FAE 20-061 . . . . 13.65 ø25, ø32 . . . FAE 25-061 . . . . 15.95 ø40 . . . . . FAE 40-061 . . . . 18.20

For dimensions not shown, see pages 6, 7, 8 and 9.

Page 12: FAE Series

Pneumatic & HydraulicSwing ClampsCatalog # FML.H

Fabco-Air, Inc. ■ 3716 N.E. 49th Avenue ■ Gainesville, FL 32609-1699 ■ Telephone (352) 373-3578 ■ Fax (352) 375-8024 ■ E-Mail [email protected] ■ Web Site http://www.fabco-air.com

Linear Slides - 6 FamiliesCatalog # LS-03

ISO 6431 Cylinders Catalog # FAQR-09

Pneumatic AngularMotion GrippersCatalog # FKA-09

Manifold Solenoid Valves Catalog # FVS.Y-09

Rotary Actuators, PneumaticCatalog # FRA.C-09

Air Pilot & Solenoid Valves Catalog # FVA.E-09

Twin Rod, Non-Rotating Air Cylinders - Catalog # FDF-09 and Catalog # FDXS-09

Multi-Power® Air PressesCatalog # FP16

Pancake® II Air CylindersCatalog Pan2-2

Li Slid 6 F ili Pneumatic Grippers,Parallel Jaw and Angular Motion - Catalog # GR-8

Stopper CylindersCatalog # ST-SC

Swing ClampsBulletin # SC-DB04

Square Pancake® II Air CylindersCatalog # SqPan2

Cylinders, Valves and Accessories Catalog #CV9

Stainless Steel BodyAir CylindersCatalog # SSB-03

Interchangeable NFPA Air Cylinders Catalog # NF-6

Specialty & Control ValvesCatalog # 14CAN

Global Series™ Metric Air Cylinders - Catalog # GC-15Global Series™ Metric Air

Modular Air Preparation System - FRLsCatalog # FRL-06

ISOSO 6431 CCylinders

R t A t t P ti

Twii Rn R dod NNo Rn Rota itin Ag Aiir

M if ld S l id V l

P ti A l

Check out these new product lines today !

Air Pilot & Solenoid Valves

Fabco-Air Product Catalog Library

12-1-09