faculty of mechanical engineering universiti teknologi ...pauzi/?download=cv-pauzi 2012.pdf ·...
TRANSCRIPT
1
FACULTY OF MECHANICAL ENGINEERING
UNIVERSITI TEKNOLOGI MALAYSIA
Name : Mohamad Pauzi Abdul Ghani
Current Position : Senior Lecturer
Area of Specialisation : Naval Architecture / Applied Hydrodynamics
Nationality : Malaysian
Identity Card /Passport No. : 630703-02-5519
Date of Birth : 03 July 1963
Marital Status : Married with 4 children
Home Address : No. 26 Jalan Bukit Kempas 2, Taman Bukit Kempas,
81200 Johor Bahru.
E-mail address : [email protected]
Office Tel. No. : 607-5535700
Mobile phone : 6019-7164304
Fax : 607-5574710
2003 : Doctor of Philosophy in Ship Science
University of Southampton, United Kingdom
1990 : Master of Science in Marine Technology
University of Newcastle Upon Tyne, United Kingdom
1987 : Bachelor of Science with Honours in Naval Architecture & Ocean Engineering
University of Glasgow, United Kingdom
1984 : Diploma in Mechanical Engineering (Marine)
Universiti Teknologi Malaysia
1.0 Personal Details
2.0 Academic Qualifications
CURRICULUM VITAE
2
Corporate Member for Institution of Engineers, Malaysia (MIEM)
(Membership No: M15316)
Professional Engineer (P.Eng), Board of Engineers Malaysia,
(Registered No: 8624)
2005 – present : Senior Lecturer
1990 – 2004 : Lecturer
1987 – 1990 : Assistant Lecturer A
1985 – 1987 : Assistant Lecturer B
1984-85 : Technical Executive at Malaysia Shipyard & Engineering
(MSE), Pasir Gudang.
1988 (5 weeks) : Training on Ocean Waves and Tides at International Center
for Theoretica Physics (ICTP), Trieste, Italy, sponsored by
UNESCO.
1996 (3months) : Training on Hydrodynamics Laboratory Functions at
Maritime Research Institute of Netherlands (MARIN), 4/3-
7/6/1996, Wageningen, Holland
Lecturer, Universiti Teknologi Malaysia
3.0 Professional Qualifications/Affiliations
4.0 Career History
3
2008 – present: : Head of Marine Technology Laboratory, Faculty of Mechanical
Engineering, UTM
2011 – present : Post Graduate Committee, Department of Marine Technology, UTM
2004 -2008 : Coordinator for Postgraduate Study in Marine Technology
Taught Academic Subjects:
UTM
Session Institution / Subject Name & Code Duration Level
Total
Credit
2004/2005 I
Universiti Teknologi Malaysia / Ship
Structure & Vibration (SML4113) 1 semester B. Eng. 3 credits
2004/2005 I
Universiti Teknologi Malaysia / Ship
Structure (SZL4113) 1 semester B. Eng. 3 credits
2004/2005 II Universiti Teknologi Malaysia / Offshore
Structures & Engineering (SML5222) 1 semester M. Eng. 2 credits
2004/2005 II Universiti Teknologi Malaysia / Engineering
Professional Practise (SMJ4802) 1 semester B. Eng. 2 credits
2004/2005 II Universiti Teknologi Malaysia / Makmal
Marin (SMJ4952) 1 semester B. Eng. 2 credits
2005/2006 I Universiti Teknologi Malaysia / Ship
Performance & Propulsion (MMK2313) 1 semester M. Eng. 3 credits
2005/2006 I Universiti Teknologi Malaysia / Advance
Marine Structure (MMK1113) 1 semester M. Eng. 3 credits
2005/2006 II Universiti Teknologi Malaysia / Small Craft
Technology (SMK4562) 1 semester B. Eng. 2 credits
2005/2006 II Universiti Teknologi Malaysia / Marine
Laboratory II (SMK4951) 1 semester B. Eng. 1 credit
2005/2006 II
Universiti Teknologi Malaysia / Ocean
Engineering & Offshore Structures
Technology (SZL5122)
1 semester B. Eng. 2 credits
2006/2007 I Universiti Teknologi Malaysia / Ship
Resistance & Propulsion (SMK3363) 1 semester B. Eng. 3 credits
2006/2007 I Universiti Teknologi Malaysia / Advance
Marine Structure (MMK1113) 1 semester M. Eng. 3 credits
2006/2007 II
Universiti Teknologi Malaysia / Ocean
Engineering & Offshore Structures
(SZL5122)
1 semester B. Eng. 2 credits
2006/2007 II Universiti Teknologi Malaysia / Ship
Performance & Propulsion (MMK2313) 1 semester M. Eng. 3 credits
2007/2008 I
Universiti Teknologi Malaysia / Ocean
Engineering & Offshore Structures
(SML5122)
1 semester B. Eng. 2 credits
2007/2008 I Universiti Teknologi Malaysia / Ship
Resistance & Propulsion (SMK3363) 1 semester B. Eng. 3 credits
2007/2008 II Universiti Teknologi Malaysia / Ship
Performance & Propulsion (MMK2313) 1 semester M.Eng 3 credits
5.0 Past and Current Administrative Positions
6.0 Teaching Experience
4
2007/2008 II Universiti Teknologi Malaysia / Ship
Resistance & Propulsion (SMK3363) 1 semester B.Eng 3 credits
2007/2008 II Universiti Teknologi Malaysia / Engineering
Professional Practise (SME4901) 1 semester B.Eng 1 credit
2007/2008 II Universiti Teknologi Malaysia / Marine
Laboratory I (SMK4941) 1 semester B. Eng. 1 credit
2007/2008 II Universiti Teknologi Malaysia / Makmal II
(SML5922) 1 semester B. Eng. 1 credit
2008/2009 I Universiti Teknologi Malaysia / Advance
Marine Structure (MMK1113) 1 semester M.Eng 3 credits
2008/2009 I Universiti Teknologi Malaysia / Engineering
Professional Practise (SME4901) 1 semester B.Eng 1 credit
2008/2009 I Universiti Teknologi Malaysia / Marine
Laboratory I (SMK4941) 1 semester B. Eng. 1 credit
2008/2009 I
Universiti Teknologi Malaysia / Ocean
Engineering & Offshore Structures
(SML5122)
1 semester B. Eng. 2 credits
2008/2009 II Universiti Teknologi Malaysia / Marine
Laboratory II (SMK4951) 1 semester B. Eng. 1 credit
2008/2009 II Universiti Teknologi Malaysia / Advance
Marine Structure (MMK1113) 1 semester M.Eng 3 credits
2008/2009 II Universiti Teknologi Malaysia / Ship
Performance & Propulsion (MMK2313) 1 semester M. Eng. 3 credits
2008/2009 II Universiti Teknologi Malaysia / Small Craft
Technology (SZM4562) 1 semester B.Eng 2 credits
2008/2009 II Universiti Teknologi Malaysia / Mechanics
of Solids Laboratory (SME39242) 1 semester B. Eng. 2 credits
2009/2010 I Universiti Teknologi Malaysia / Marine
Laboratory I (SMK4941) 1 semester B. Eng. 1 credit
2009/2010 I Universiti Teknologi Malaysia / Advance
Marine Structure (MMK1113) 1 semester M.Eng 3 credits
2009/2010 I Universiti Teknologi Malaysia / Ship
Performance & Propulsion (MMK2313) 1 semester M. Eng. 3 credits
2009/2010 I Universiti Teknologi Malaysia / Ship
Resistance & Propulsion (SMK3363) 1 semester B. Eng. 3 credits
2010/2011 I Universiti Teknologi Malaysia / Ship
Performance & Propulsion (MMK2313) 1 semester M. Eng. 3 credits
2010/2011 I Universiti Teknologi Malaysia / Advance
Marine Structure (MMK1113) 1 semester M.Eng 3 credits
2010/2011 I Universiti Teknologi Malaysia / Ship
Resistance & Propulsion (SMK3363) 1 semester B. Eng. 3 credits
2010/2011 I Universiti Teknologi Malaysia / Marine
Laboratory I (SMK4941) 1 semester B. Eng. 1 credit
2010/2011 II Universiti Teknologi Malaysia / Ship
Structure I (SMK3123) 1 semester B. Eng. 3 credits
2010/2011 II Universiti Teknologi Malaysia / Advance
Marine Structure (MMK1113) 1 semester M.Eng 3 credits
2010/2011 II Universiti Teknologi Malaysia / Small Craft
Technology (SMK4562) 1 semester B.Eng 2 credits
2011/2012 I Universiti Teknologi Malaysia / Ship
Performance & Propulsion (MMK2313) 1 semester M.Eng 3 credits
2011/2012 I Universiti Teknologi Malaysia / Marine
Laboratory I (SMK4941) 1 semester B. Eng. 1 credit
2011/2012 II Universiti Teknologi Malaysia / Ship
Structure I (SMK3123) 1 semester B. Eng. 3 credits
2011/2012 II Universiti Teknologi Malaysia / Marine
Laboratory I (SMK4941) 1 semester B. Eng. 1 credit
5
Taught Industry Short Courses:
Course Name Date Level Credit /
Duration
Universiti Teknologi Malaysia / Short
Course on Ship Drawing (MT006)
27th Sept ~
1th Oct 2004
B.Eng. 27 hours
Makmal Marin I / SMJ5912 (ATMA) 1 semester B. Eng. 2 credits
Makmal Marin I / SMJ5912 (SPACE) 1 semester B. Eng. 2 credits
Universiti Teknologi Malaysia / Short
Course on Ship Structures and Strength
(MT003)
19th ~ 20
th
May 2005
B. Eng.
6 participants from
Pakistan
2 hours
Universiti Teknologi Malaysia / Short
Course on Basic Hydrostatics and Ship
Stability (MT001)
23th ~ 24
th
May 2005
B. Eng.
15 participants from
Pelabuhan Tajung
Perlepas
8 hours
Universiti Teknologi Malaysia / Short
Course on Basic Hydrostatics and Ship
Stability (MT001)
6th ~ 9
th June
2005
B. Eng.
LKIM x 2
TLDM x 1
Penang Port x 3
12 hours
Akademi Laut Malaysia/Ship Lines Plan
Drawing
5-6th Feb
2009
Post Grad Professional
Course 16 hours
Akademi Laut Malaysia/Ship Resistance
& Propulsion
11-13th Feb
2009
Post Grad Professional
Course 16 hours
Akademi Laut Malaysia/Ship Structure &
Strength
20-21st Feb
2009
Post Grad Professional
Course 16 hours
UTMSPACE/Workshop On Introduction
to Offshore Structure Design &
Construction
20-22nd
Jul
2011, Hotel
Grand
Paragon JB
Professional
Development Program for
CIDB’s staff
2hours
UTMSPACE/Workshop On Ship
Drawing
10-12th Jun
2011, Hotel
Grand
Season KL
Professional
Development Program for
RMN’s staff
22hours
6
6.1 Undergraduate Final Year Project Supervision
See Appendix I
6.2 Postgraduate Supervision (PhD and MSc)
See Appendix II
7.1 Completed Research Projects
Topic Start End Sponsor/Responsibilty
Offshore Fishing Vessel Design 1988 1996 IRPA (Member)
Assault Boat Design 1989 1992 UPP/UTM (Member)
CAD in Ship Production 1989 1992 UPP/UTM (Member)
Patrol Boat Research Programme 1994 1999 IRPA ( Deputy Head)
Development of Torpedo Prototype 1998 2001 RMC/UTM (Member)
Powering of measurement of Malaysian
Fishing Boats
1998 2002 IRPA ( Member)
Development of Environmental Friendly
Boat
2003 2006 IRPA (Member)
Ethical Awareness Amongst
Engineering Students in Malaysian
Public Universities
Jan 05 Dec 05 IRPA (Member)
Wake Wash Measurement in Towing
Tank
2005 2006 FRGS (Head)
Conceptual Design of a Shallow
Draught Vessel with minimum
Resistance and Response
1.12.06 30.11.08 MOSTI (Member)
Development of Ship Manoeuvring
Simulator for Research, Training and
Safety Assessment
1.8.07 31.7.09 MOSTI (Member)
Development of 2 Seater Wing In
Ground Effect Craft
1.1.09 31.12.10 MOSTI (Member)
GUMUSUT KAKAP Semi Submersible
FPS Project (Contract Research)
1.4.10 31.12.11 MISC Bhd (Head)
Development of Unmanned Surface
Vessel
2010 2012 MOSTI
7.0 Research Experience
7
7.2 Ongoing Research Projects
Topic Start End Sponsor/Responsibilty
Fuel Efficiency of the Ocean Going
Vessel due to Hull Roughness
2011 GUP (Head)
Design of the Cargo Containment
System for New Generation LNG
Carrier
2011 Flagship (Head)
New LNG Ship Design: An
Innovative Efficiency, Low
Maintenance and Green Ship on
Preventing Biological Invasion of
Marine Organisms Transported in
Ballast Water
2011 Member
Optimising Ocean Energy Devices
for Malaysian Waters
Member
Simulation of Ship Manoueverability
Characteristics due Effect of Stern
Hull and Water depth.
2011 Member
Prototype Development of Offshore
Fishing Remote Terminal
2011 Member
No Project / Clent Report Date
1 Ferrocement Surveillance Pontoon Design for Royal
Malaysian Custom & Excise
Oct 1987 – Oct 1989
2 Preliminary Design of Fishery Research Vessel for Marine
Fisheries Resource Research Centre, Terengganu
1992
3 Assessment of Open Sea Fish Cage Design
for Fisheries Research Institute, Batu Maung, Penang,
Jan – Apr 1993
4 Strength Calculation of Ferrocement Pontoon for Patibumi
Sdn. Bhd., Klang
1993
5 Cruiser Boat Design Assessment for Patibumi Sdn. Bhd.,
Klang
1994
6 Mooring Buoy Design Assessment for Perlis Marine
Engineering Sdn. Bhd.
1994
7 Preliminary Design of 15m GRP Fast Patrol Boat for
Destination Marine Services Sdn. Bhd.
Sep – Dec 1996
8 Double-Hulling of 100m Product Tanker: An Optimization
using CFD and Ship Model Testing for Malaysia Shipyard
& Engineering Sdn. Bhd.
Oct 96 – Jan 97
8.0 Consultancy Work
8
Industry / Commercial Tests (conducted at Marine Technology Laboratory, UTM):
1. Resistance Test
2. Propulsion Test
3. Seakeeping Test
4. Maneuvering Test
5. Paint Smear Test
6. Roll-Decay Test
7. Inclining Experiment
See Appendix III : Consultancy Works
9
9.1 Books
1. Mohamad Pauzi Abdul Ghani & Muhammad Nazri Jaafar
`Unsur-unsur Rekabentuk Kapal (Elements of Ship Design)'
Academic Publication Unit, UTM, 1994
2. Che Abas Che Ismail, Mohd Yunus Abdullah & Mohd Pauzi Abdul Ghani
Theory of Vibrations With Applications - Translation
Academic Publication Unit, UTM, 1993
Theses
1. Mohamad Pauzi Abdul Ghani
`Design Aspects of Catamarans Operating at High Speed in Shallow
Water’. Ph.D. Thesis, University of Southampton 2003
2. Mohamad Pauzi Abdul Ghani
`Powering Estimates for Fishing Vessels with particular reference to a
traditional Malaysian Form, M.Sc. Dissertation,
University of Newcastle Upon Tyne 1990.
3. Mohamad Pauzi Abdul Ghani
`Small Combination Trawler and Purse Seiner with alternative Hull in
Steel or Ferrocement', B.Sc (Hons). Dissertation, University of Glasgow
1987.
9.2 International and National Journals
1. M.P Abdul Ghani, M.Z Ahmad and N. Ismail, Ferrocement For Royal
Malaysian Custom – Some Design Requirements, Journal of Ferrocement, AIT,
Bangkok, pp301-307, vol 23,no. 4, Oct 1993
2 A.F Molland, P.A Wilson, D.J Taunton, S. Chandraprabha, M.P.Abdul Ghani, “Resistance
and Wash Wave Measurements on a Series of High Speed Displacement Monohull and
Catamaran Forms in Shallow Water”, Journal of Maritime Engineering, Vol 146 (B), 2004,
Royal Institution of Naval Architect.
3 A. Maimun, A. Priyanto, K.S. Wong, M. P Abdul Ghani, M Rafiqul, Effects of side keels
on patrol vessel safety in astern waves, Ocean Engineering 36 (2009) 277-284.
4 M.P Abdul Ghani, P.A. Wilson, Experimental analysis of catamaran forms with bulbous bows
operating in shallow water, International Shipbuilding Progress 54 (2009) 1-29.
5 M.P Abdul Ghani, J. Julait, Prediction of Added Resistance of Ship due to Regular Head
Waves, Jurnal Mekanikal UTM 2009
9.0 Publications
10
6 M.P Abdul Ghani, J Julait, P.A. Wilson, Experimental Analysis of Added Resistance of Ship
due to Regular Head Waves, International Journal of Maritime Engineering, Royal Institution
of Naval Architect, UK – in progress (Ref No. IJME/186
7 M.P Abdul Ghani, et al., “Experimental Investigation of the Drag Characteristics of Different
Ship Hull Coating with using Rotor Apparatus”, Jurnal Mekanikal UTM 2010
8 O. B Yaakob, A Nasirudin, M.P Abdul Ghani, T. Mat Lazim, M.A Abdul Mukti and Y.M
Ahmed, “Parametric Study of a Low Wake-wash Inland Waterways Catamaran”, Scientia
Iranica, Transaction B: Mechanical Engineering, May 2012 (Impact Factor 0.242)
9.3 International and National Conferences & Seminars
1 M.P Abdul Ghani, A.F. Sabki and O. Yaakob, “Powering Estimation for Malaysian Fishing
Vessel”(in malay), A National Conference on Fishing Technology, Kuala Terengganu, 10-11
March 1991
2 O.Yaacob, N. Abdul Hamid and M.P Abdul Ghani , “Materials for Structures in the Marine
Environments” A National Conference on Marine Corrosion in Ports and Harbours, Kucing,
Sarawak, Oct. 1991
3 M.P Abdul Ghani, M.Z Ahmad, N. Ismail, “Ferrocement Pontoon For Royal Malaysian
Custom – Some Design Requirements” 2nd
National Seminar on Ferrocement 1993, UTM,
Johor Bahru
4 M.P Abdul Ghani, “Ferrocement Technology – An Introduction and Basic Principle”
Workshop on Composite Materials, Jabatan Pendidikan Negeri Pahang, 4-9th Apr 1994,
Kuantan, Pahang
5 M.A. Abdul Mukti, Y. Samian N. Ismail, A. Maimun, M.P Abdul Ghani, A.M. Othman, “Design
and Construcion of a Dee Sea Purse Seiner Fishing Vessel” Malaysian Science &
Technology Congress ’94 – R&D Progress and Achievement, Kuala Lumpur, 15-18 Aug
1994.
6 O. Yaakob, T.M Lazim, M.P Abdul Ghani, M.A. Abdul Mukti, S. Abu Hassan, “Hull Form
Design and Resistance Predictions of An Underwater Vehicle” International Conference on
Advances n Strategic Technologies-2000 (ICAST2000), Kuala Lumpur, Malaysia, 15- 17 Aug
2000
7 M.P Abdul Ghani and P.A Wilson, “Wake Wash from High Speed Displacement Craft”, Asia
Pacific Workshop on Marine Hydrodynamics(APHyro2002), Kobe, Japan, May 21-23 2002
8 A.F Molland, P.A Wilson, D.J Taunton, S. Chandraprabha, P.A Ghani, “Numerical Estimation
of Ship Wash Waves in Deep and Shallow Water”, 7th
International Conference on Fast Sea
Transportation (FAST 2003), Ischia, Italy 7-10 Oct 2003
9 M.P Abdul Ghani, S Chandraprabha, “Wake Wash from High Speed Displacement Craft”, 4th
Regional Conference on Marine Technology, MARTEC 2004, Johore Bahru
10 Omar Yaakob, Mohd. Pauzi Abd. Ghani, Mohd. Afifi Abd. Mukti, Ahmad Nasirudin, Kamarul
Baharin Tawi, Tholudin Mat Lazim, “The Wake Wash Prediction on an Asymmetric
11
Catamaran Hull Form”, Regional Conference on Vehicle Engineering and Technology
(RIVET06), Kuala Lumpur, July 2006
11 Mohd Afifi Abdul Mukti, Kamarul Bahrain Tawi, Omar Yaakob, Mohd. Pauzi Abd. Ghani,
Ahmad Nasirudin, Tholudin Mat Lazim, “An Enviromental Friendly Leisure Boat”, Regional
Conference on Vehicle Engineering and Technology (RIVET06), Kuala Lumpur, July 2006
12 Omar Yaakob, M.P Abdul Ghani, Maritime Capability in the Muslim World: A Historical
Review and Current Status, Proceedings International Seminar on Islamic Science and
Technology (INSIST 2008), Kuala Lumpur 18-19th Mac 2008.
13 Omar Yaakob, M.P Abdul Ghani, et al, “Development of Ocean Wave and Current Energy
Devices” Proceedings Seventh UMT International Symposium on Sustainability Science and
Management (UMTAS 2008) Kuala Terengganu, June 2008
14. M.P Abdul Ghani, M.N Abdul Rahim, “Prediction of Wake Wash in Towing
Tank, Regional Conference on Vehicle Engineering & Technology, RIVET2008,
15-16 July 2008, Kuala Lumpur.
15. M.P Abdul Ghani, J. Julait, “Prediction of Added Resistance of Ship due to Regular Head
Waves”, Regional Conference on Vehicle Engineering & Technology, RIVET2008, 15 – 16
July 2008, Kuala Lumpur
16. O. Yaakob, T.M Lazim, M.P Abdul Ghani, M.A. Abdul Mukti, S. Abu Hassan, “A Low Wash
Hull Form and Pollutant Free Inland Waterways Leisure Craft” International Conference on
Science and Technology, Bangkok 23-25 April 2009
17. Yaakob O., Tawi, K.B., Suprayogi, D.T, M.P Abdul Ghani, CFD and Experimental Studies on
Vertical Axis Marine Current Turbine, MSTC (Malaysian Science and Technology
Conference) 2010, 9-11 November 2010, Kuala Lumpur.
18. M.P Abdul Ghani, N Zainal Abidin, A. Safwan, “Investigation on the effect of Podded
Propulsor on Ship Resistance using CFD” International Conference on Marine Technology,
MARTEC2010, 11-12 Dec 2010 Dhaka, Bangladesh
19. M.P Abdul Ghani, P.A. Wilson, Low Wake Wash Catamaran for Coastal Region, Second
International Conference on Coastal Zone Engineering and Management, 1-3 Nov 2010,
Muscat Oman.
20. Allan Magee, M.P Abdul Ghani, A. Maimun, Rizwan Sheikh, Kenneth Yeoh Hock Guan,
Jaime Tan Hui Choo, Model Testing of Floating Platforms at UTM Malaysia. Asia Pacific
Offshore Conference (APOC 2010), 13-14 December 2010.
21. A. Maimun, A. Priyanto, N. Ismail, M. P Abdul Ghani, Experimental Evaluation of Wave Run-
up Extremes of a Large Volume Semi-Submersible for Minimum Air Gap Definition Asia
Pacific Offshore Conference (APOC 2010), 13-14 December 2010.
22. M.R Jalal, N. Ismail, M.P Abdul Ghani, O. Yaakob, Current Loading Analysis on a Semi-
Submersible-FPS Platform Using CFD. Asia Pacific Offshore Conference (APOC 2010), 13-
14 December 2010.
23. M.P Abdul Ghani, N. Ismail, O.Yaakob, A. Priyanto, Experimental Analysis on Motions of a
Free Floating Semi – FPS in Irregular Waves. Asia Pacific Offshore Conference (APOC
2010), 13-14 December 2010.
24. Allan Magee, M.P Abdul Ghani, A. Maimun, Kenneth Yeoh Hock Guan, Jaime Tan Hui
Choo, Model Tests of Multi-Column Floating Platforms, ASME 2011, 30th International
Ocean, Offshore and Artic Engineering (OMAE2011), Rotterdam, 19-24 June 2011.
12
25. Md Salim Kamil, Mohamad Pauzi Abdul Ghani, Adi Maimun Abd Malek & Kirill V
Rozhdetvoskiy, Revitalising the Theoretical Approach of Predicting Ship Wave Resistance,
Marine Science and Technology Conference (MARSTEC2011), Kuala Lumpur, 12-13 Sep
2011.
26. Md Salim Kamil, Mohamad Pauzi Abdul Ghani, Adi Maimun Abd Malek & Kirill V
Rozhdestvenskiy, An Accurate Ship Wave-making Resistance of An Improved Michell’s
Equation, 3rd
International Conference on Engineering Technology (ICET2011), Kuala
Lumpur, 6-8 Dec 2011.
27. M.S.Kamil, M.P.A. Ghani, A. M.A. Malek & K. V Rozhdestvenskiy, A Definite Integral Solution
of Ship Wave Resistance for Twin-Hull Ships, World Maritime Technology Conference
(WMTC2012), St Petersburg, Russia, 29 Mei - 1 June 2012
9.4 Other Publications (Technical Reports, Manuscripts etc)
Technical Reports
1. Mohamad Pauzi Abdul Ghani et. Al
Wake wash study in Towing Tank, FRGS Final Report 2006 submitted to RMC
2. Mohamad Pauzi Abdul Ghani. et. al
`Inclining Test on PERINTIS - Offshore Fishing Vessel Design Research
Programme' , Feb.1993
3. Mohamad Pauzi Abdul Ghani, Adi Maimun Abdul Malek
`A Training Report on Resistance and Propulsion Tests for a 106 metre
Twin Screw RMN Frigate', Internal Report submitted to Research & Development
Unit, U.T.M, 1992
4. Mohamad Pauzi Abdul Ghani. et. al
`Progress Report No. 6 - Offshore Fishing Vessel Design Research
Programme' November 1990
5. Mohamad Pauzi Abdul Ghani. et. al
`Progress Report No. 5 - Offshore Fishing Vessel Design Research
Programme', November 1989
6. Mohamad Pauzi Abdul Ghani. et. al
`Progress Report No. 4 - Offshore Fishing Vessel Design Research
Programme', Mac 1989
7. Mohamad Pauzi Abdul Ghani. et. al
`Progress Report No. 3 - Offshore Fishing Vessel Design Research
Programme', August 1988
8. Mohamad Pauzi Abdul Ghani. et. al
`Progress Report No.2 - Offshore Fishing Vessel Design Research
Programme', June 1988
9. Mohamad Pauzi Abdul Ghani. et. al
`Progress Report No.1 - Offshore Fishing Vessel Design Research
Programme' , Mac 1988
10. Mohd Afifi Abd. Mukti, Adi Maimun Abd Malek, Ahmad Fuaad Ahmad Sabki, Mohamad
Pauzi Abdul Ghani, Mohd Zamani Ahmad
13
`Establishment of Marine Technology Laboratory for New Campus of Universiti
Teknologi Malaysia, Skudai Johor, Technical Proposal submitted to EPU, 1988
Articles
1. ‘Sauh ( Anchor )’, Enclyclopedia of Science and Technology, UTM/DBP 1997
2. ‘Tangki Tunda ( Towing Tank )’, Enclyclopedia of Science and Technology, UTM/DBP
1997
3. ‘Dok ( Dock )’, Enclyclopedia of Science and Technology, UTM/DBP 1997
26
th ITTC 2011, Rio de Janeiro, Brazil, 28
th August – 3
rd September 2011
APOC 2010, Kuala Lumpur
Rivet 2008, Kuala Lumpur
25th ITTC 2008, Fukuoka, Japan 14
th – 20
th September 2008
IHOCE 2008 Kuala Lumpur
MARTEC 2004 Johor Bahru
FAST2001 Southampton, UK
ApHydro2002, Kobe, Japan
RINA HQ London, 1999
Ocean Waves and Tides, International Centre for Theoretical Physics (ICTP), Trieste Italy, 1988,
sponsored by UNESCO.
Hydrodynamics Laboratory Functions, Maritime Research Institute Netherlands, 4/3-7/6/96
9.5 Courses/Seminars/Workshops attended
14
9.6.1 Graduate Thesis Examination
Candidate Faculty/Universiti Level Date Role
Norazimar
Zainudin
FKM/UTM Masters Dec 2005 Internal Examiner
Dony Setyawan FKM/UTM Masters Dec 2005 Internal Examiner
Andi Haris
Muhammad
FKM/UTM PhD Sep 2007 Internal Examiner
Behnam Bodaghi FKM/UTM Masters Nov 2008 Examiner
Nurulnatisya
Ahmad
FKM/UTM Masters Nov 2008 Examiner
Bakhtiar Ariff bin
Baharudin
FKM / UTM Masters 2009 Internal Examiner
Faisal Ikram bin
Abdullah
FKM / UTM Masters 2009 Internal Examiner
Mohd Mursyid bin
Mahjuddin
FKM / UTM Masters 2009 Internal Examiner
Asmawi bin Abdul
Malik
FKM / UTM Masters 2009 Internal Examiner
Asmawi bin Ismail FKM / UTM Masters 2009 Internal Examiner
Kamarul Nasser
Mokri
FKM / UTM Masters 2009 Internal Examiner
Shamsul Effendy
bin Abdul Hamid
FKM / UTM Masters 2009 Internal Examiner
Che Wan Mohd
Noor bin Che
Wan Othman
FKM / UTM Masters 2009 Internal Examiner
Muhammad
Nasuha bin
Mansur
FKM / UTM Masters 2009 Internal Examiner
Zaimi bin Zainal
Mukhtar
FKM / UTM Masters 2009 Internal Examiner
Mohd Ruskiman
Abdullah Nawawi
FKM/UTM Masters May 2012 Examiner
Rusandi Dwirama
Putra (P1)
FKM / UTM Masters 6 June 2012 Examiner
Muhammad Shafif
Mohd Salleh (P2)
FKM / UTM Masters 6 June 2012 Examiner
Mohd Syamsul
Bahtiar (P2)
FKM / UTM Masters 6 June 2012 Examiner
Noverdo Saputra FKM / UTM Masters 6 june 2012 Examiner
9.6 Other Academic Responsibilities (Examiners,
Reviewers, Paper Referees, Editor and etc)
.
15
9. 7 Journal Reviewer
Title Journal Year Publisher Remarks
Estimation of Ship Manoeuvring
Characteristics at Conceptual
Design Stage
Jurnal
Mekanikal
1996 Facultyof Mechanical
Engineering, UTM
Vol.1 July
1996
Design of Malaysian Fishing Vessel
for Minimum Resistance
Jurnal
Teknologi
2004 Penerbit UTM Mac 2004
Weather Downtime and its Effect on
Fishing Operation in Peninsular
Malaysia
Jurnal
Teknologi
2004 Penerbit UTM April 2004
Hydraulic Model Test of Wave
Energy Conversion
Jurnal
Mekanikal
2004 Faculty of Mechanical
Engineering, UTM
Oct 2004
Parametric Study on the Dynamic
Behaviour of Articulated Tower
Jurnal
Mekanikal
2005 Faculty of Mechanical
Engineering, UTM
Apr 2005
Prediction of Motion Characteristics
on SWATH Type Floating Structure
Using 2-D Frank Close-Fit Method
Jurnal
Mekanikal
2005 Faculty of Mechanical
Engineering, UTM
Mac 2005
Reliability Model for Collision
Aversion Inland Water
Transportation: The Case of
Damage Estimation for Malaysian
Langat River
International
Journal of
Maritime
Engineering
2010 The Royal Institution of
Naval Architects, UK
Feb 2010
Implementation of Gas Turbine Co-
Propulsion Engine to Ecotourism
Vessel to Improve Sailing Speed up
to 35 knots
Jurnal
Mekanikal
2011 Faculty of Mechanical
Engineering, UTM
Jan 2011
Drag Reduction in Ship Model by
Biopolymer of Slime Monepterus
Albus Solution in Wall
Jurnal
Mekanikal
2011 Faculty of Mechanical
Engineering, UTM
Apr 2011.
A Study on Estimation of Propulsion
for Wing in Ground Effect (WIG)
Craft to Take-Off
Jurnal
Teknologi
2012 Penerbit UTM April 2012
Editorial Works
1. ‘Kapal Selam ( Submarine )’, Enclyclopedia of Science and Technology, UTM/DBP 1995
2. ‘Kapal Korek ( Dredger )’, Enclyclopedia of Science and Technology, UTM/DBP 1996
3. ‘Jet Pendorong Air ( Waterjet Propulsor )’, Enclyclopedia of Science and Technology,
UTM/DBP 1997
4. ‘Tambatan ( Mooring )’, Enclyclopedia of Science and Technology, UTM/DBP 1998
5. ‘Tambatan Boya Tunggal ( Single Point Mooring )’, Enclyclopedia of Science and
Technology, UTM/DBP 1998
16
1. Universiti Teknologi Malaysia Research Award 1991
2. Universiti Teknologi Malaysia Merit Award (2005)
3. Universiti Teknologi Malaysia Merit Award (2009)
4. Junior Associate of International Centre for Theoretical Physics (ICTP), Trieste, Italy
1988
1. Penceramah Kerjaya sempena World Maritime Day, 2008, Miri, Sarawak
2. Penggubal Soalan PTK untuk Juruteknik J17, J22, Pembantu Teknik J29 dan Jurutera J41
3. Panel untuk Program “Menemuramah Jurutera Profesional” untuk pelajar UTHM, April/Mei
2011
4. Panel untuk Program “Menemuramah Jurutera Profesional” untuk pelajar UTHM, April/Mei
2012
10.0 Awards / Honors / Patents
11.0 Community Service / Other Contributions and Recognition
APPENDIX I: LIST OF FINAL YEAR PROJECT SUPERVISED No STUDENT TITLE YEAR
1 Fadzil bin Ahmad Preliminary Study of Wavemaker Design 1998/99
2 Lee Guan Ling The Effect of Marine Growth on the structure Response of Fixed Offshore Structure 1991/92
3 Ahmadi bin Amin Powering Prediction for Small Craft 1991/92
4 Ahmad Nahrudi bin Nor Design of Multipurpose Fishing Vessel 1991/92
5 Ridwan bin Zainol Kajian Rekabentuk Awal Kapal Hidrofoil bagi RORO Feri 1992/93
6 Samsol Azhar Zakaria Human Powered Submarine 1995/96
7 Ganesh a/l Paramuguru Hydrodynamics Analysis of Ferrocement Surveillance Barge 1995/97
8 Yeoh Khair Hoor Design of a High Speed Craft for Patrol and Surveillance 1995/98
9 Mohd Azizan Abd Razak Design of a Small or Simple Offshore Structure for Malaysian Waters 1995/99
10 Sivam Ramalingam A Prototype Design of an Offshore Fish Cage System 1994/95
11 Rashidi bin Ab. Rahman Kajian Kemalangan Bot Penumpang di Marang, Terengganu 1994/96
12 Nazri bin Abas Design and Development of An Ocean Waves Measuring Device for Local Application 1994/97
13 Azman Hussain Mooring Buoy Design Technique for Offshore Application 1994/98
14 Aziz bin Mat Nor A Parent Hull Form for a Multi-purpose Vessel 1996/97
15 Lim Kah Ghee Hydrodynamic Loading on Fixed Offshore Structure 1997/98
16 Mohd Hatta bin Husin Preliminary Study of Propeller Characteristics for 100 m Product Tanker 1997/98
17 Lim Chit Soon Powering Determination of TRF1010 by Model Tests 1998/99
18 Mohd Zul Azri Abdul Ghani Preliminary Design of Rubbish Collector Boat for Inland Waterway 20042005
19 Mohd Fadzil Mokhtar Preliminary Design of Sailing Yachts 20042005
20 Ahmad Safwan Hashim Prediction of Wavemaking Resistance Using CFD 20042005
21 Mohd Adzmirul Che Azmi Improving Resistance Characteristics of Tug Boat 20042005
22 Mohd Azmi Jais Design Study of Fast Patrol Boat for Developing Countries 20042005
23 Rostafar Abdul Rasid Fatigue Assesment Study on Offshore Platform 20042005
24 Abdul Shahid Abu Bakar Design Study of Offshore Jacket Structures 20042005
25 Ling Kooi Hui Comparison between monohulls and catamarans for a particular ferry service 20042005
26 Lai Chee Yong Development of Developable Surface Hull Form 20042005
27 Mohamad Ramli Design Study of Multipurpose Fishing Vessel 20052006
28 Hamzah Desa Design Study of Military Landing Craft 20052006
29 Firdaus Khairudin Resiatance Prediction Methods for Patrol Boats 20052006
30 Mohd Helmi Arshat Optmization of Bulbous Bow Form using CFD 20052006
31 Lee Khian Whatt Further Development of Human Powered Submarine 20052006
32
Mohd Nor Asikin Abdul
Rahim Investigation of Wake Wash from Patrol Craft 20052006
33 Nurhafizi Zakaria Design a Hovercraft for Military Operation 20052006
34 Mohd Izwan Ismail Assessment of Small Craft Structures 20052006
35 Sahrol Suhai Development of Rubbish Collector Boat 20052006
36 Mohd Nassir Abdul Rahman Experimental Test Set Up for Measuement of Ships Bollard Pull 20062007
37 Mohd Hanif Abdul Rashid Design of Catamaran Dive Support Boat for RMN 20062007
38 Khalil Dunnia Development of FAC for RMN 20062007
39 Asrul Alias Design Study of a Simple Offshore Structures for Malaysian Water 20062007
40 Mohd Faizal Ali Investigation of Wake Wash from High Speed Motoryacht 20062007
41 Mohd Erwan Ahmad Method of Testing Planing Craft 20062007
42
Wan Kamarul Arifin Wan
Samat Offshore Oil Exploration Using AUV 20062007
43 Khairul Izuan A Karim Experimental Investigation of the drag characteristics of different ship hull coatings 20072008
44 Mohd Fadli Ismail Structural Design Assessment of a 60m Motor Yacht 20072008
45 Ahmad Azrizal Mohd Arifin Further Stability Assesment of a 26m Stern Trawler Fishing Boat 20072208
46 Mohammad Lokman Hamidun Preliminary Design of A Multipurpose Patrol Boat 20082009
47 Aizat Amzar Sahar Further Design of Rubbish Collector Boat 20082009
48 Rosmaini Ahmad Razali Further Development Offshore Fish Cage Design 20082009
49
Farhan Izwan Shafiee Shariff
Ng Preliminary Design of High Speed Craft to Fight Piracy/Smuggling 20082009
50 Mohd Fadhil Abdullah Wake wash Computation Using SHIPFLOW 20082009
51 Mohd Yusri Yusof Further Investigation of Wake Wash Measurement in Towing Tank 20082009
52 Partiban AL Singaraveloo Effects of Podded Propulsor on Ship's Motion and Resistance 20082009
53 Mohd Hazwan Abdullah Glass Bottom Boat for Marine Park 20092010
54 Noh bin Zainal Abidin Investigation on The Effect of Podded Propulsor on Ship Resistance by using CFD 20092010
55 Mohd Taqiyuddin Mohd Yusof Computer Based Data Acqusition for Ship Wake Wash Measurement System 20092010
56 Mohd Hanafiah Ali Further Experimental Investigation of the Drag Characteristics of Different Ship hull coating 20092010
57 Shah Rizal Mohamad Evaluation of Semi-Submersible Platform Motion in Regular Waves 20102011
58 Zaim Asyraf Mustaffa Analytical and Experimental Investigation of Seakeeping of the existing MPSS Naval Ship with Podded Propeller 20102011
59
Mohd Hisyamuddin Abdul
Hamid
Assessment of Resistance for Fast Craft 20102011
60 Rosli bin Mohamed Further Study on Method of Testing Planing Craft 20102011
61 Izdihar bt Wan Maharuddin Design Study of Air Assisted Catamaran 20102011
62 Tang Howe Lin Determination of Wave Resistance from Surface Wave Pattern 20112012
63 Andrew Awang AK Japuk
An Investigation of Ship Propulsion Power Reduction Through Improved Stern Hull Water Stream Flow Feed to
Propeller 20112012
64 Muhammad Firdaus Kasmon Re-Commisioning of Wake Measurement Apparatus 20112012
65
Mohamad Nazarudin Md
Jamain
A Comparison Between Existing Small Craft Scantlings and those determined using The Proposal ISO/TC 188
Standard 20112012
66 Salman Rukaini Mokhtar An Investigation of Ship Hull Girder Deflection 20112012
67 Muhamad Faizal Nordin Further Development On Design of Patrol Boat 20112012
APPENDIX II: LIST OF POST GRADUATE SUPERVISED
NO STUDENT TITLE Level YEAR 1 Johnes Julait Added Resistance of Ship Due to Regular Head Waves Masters 20062007
2 Azliza Abdul Aziz Development of Ocean Energy Extraction System Masters 20062007 3 Azri Hamim Ab Adzis Development of a Method to Investigate the Wash of Recreational Craft in Inland Waterways Masters 20082009 4 Anuar Bero Performance Prediction for High Speed Craft Masters 20082009 5 Iwan Zamil Mustaffa Kamal Further Development of Ship Added Resistance in Head Waves Masters 20082009 6 Chang Ken Seng Model-Ship Correlation on the Powering Performance For a 34m Multi Mission Vessel Masters 20082009 7 Lo Teck Yin Tempeature Distribution and Displacement Analysis of Fillet Joint by Using FEA & Experiment Masters 20082009
8 Nik Mohd Khairuddin Nik Ismail
Investigation of Motion and Wave Induced Force on Semi-submersible in Regular Waves Masters 20112012
9
Muhammad Akmal bin Azizan Investigation of VIM of a Circular Cylinder using CFD Masters 20112012
10 Mohamad Azahari Johan Development of a Method to Investigate the Wash of Recreational Craft in Inland Waterways Masters Ongoing 11 Mohd Akmal Abu Hassan Analysis of FPSO Life Cycle Cost Masters Ongoing 12 Dedy Triawan Suprayogi The Effects of environmental and Vessel factors to Ship Generated Waves Ph.D Ongoing 13 Mohd Marzuki Tokichor
Ongoing
14 Roslan Alang Endut
Ongoing 15 Mohd Hairi Abd Hamid
Ongoing
16 Nofrizal Ali Akhbar
Ongoing
APPENDIX III : CONSULTANCY WORKS
No Title Client Year
1 Model Tests of a 52m Fast Offshore Crew Boat Malaysia 2008
2 Model Tests of a Truss SPAR Platform Malaysia 2008
3 Coastal Assessment Study due to the development of PTP Malaysia 2008
4 Resistance Model Test on 18m Cathedral Hull Vessel Australia 2010
5 Resistance Model Test on 20m Catamaran Hull Vessel Australia 2010
6 Resistance Model Tests for 10000 DWT Deck Cargo Vessel Singapore 2010
7 Resistance Model Tests for 15000 DWT Deck Cargo Vessel Singapore 2010
8 OBM Thrust Test Malaysia 2010
9 Mdel Construction of 3m Forked Barge Malaysia 2011
10 Resistance Model Test on 34m New Generation Patrol Boat Thailand 2011
11 Resistance Model Test on 11m High Speed Boat for Marine Park Malaysia 2011
12 Resistance & Seakeeping Tests 16m Tug Boat Malaysia 2011
13 Riser VIV Test Malaysia 2011
14 Design Appraisal of Pump Boat in Sabah Malaysia 2011
15 Resistance Model Test on 11m High Speed Boat for Marine Park Malaysia 2012