facade scaffolding uni 70/100 -...

Facade Scaffolding UNI 70/100Prices

valid from 01.12.2011

English

Stark gerüstet.Scaf fo ld ing Systems

CONTENTS

Structure / Benefits of the system 4 - 5

Frames 6 - 7

Decks 8 - 9

Scaffold access - inside - 9

Scaffold access - outside - 10

Vertical bracing / Adjustable base 11

Side guards 12

Upper scaffold guard rails 13

Scaffold expansion 14 - 15

Roof guard 15

Roof guard scaffolds 16

Transoms 17

Anchoring 18

Mobile towers / Single parts / Spare parts / Storage 19

Scaffold examples 20 - 22

Fax order form 23

2

All prices are excl. of VAT applicable at the time of shipment. All dimensions and weights are non-binding approximate values. Technical data is subject to change without prior notice. Technical data is subject to change without notice. Prices are charged as applicable on the day of shipment. Sale is subject exclusively to our sales terms and delivery conditions. In brief: place of business and jurisdiction is Plettenberg. Extended reservation of property rights until full payment of all our outstanding accounts receivables. Our prices are ex works.

The facade scaffold MJ UNI 70/100 has the overall approval of the Deutsches Institut für Bautechnik (German Institute of Planning and Building Regulation), Berlin, approval number Z-8.1-184. Z-8.1-303 and Z-8.1-871*.

The high quality of this system is based on the optimal ergonomic construction, the durability of the materials and the assembly logics that virtually rules out any assembly errors. The key features of the system are the round bolt connection and the swivel pins.

The individual scaffold bays are connected by decks which are placed on the round bolts of the vertical frames so that the system can be erected in next-to-no time. In addition, this practically rules out the risk of the decks slipping. The tilting pins in the vertical frames are used to fasten guard rails and diagonals without the use of tools.

The standard design of the MJ UNI 70 scaffold system can be utilized according to DIN 4420-1:1990 for scaffolding group 3 and as guard and roof guard scaffolding. The MJ UNI 100 scaffold system, according to length, can be used for load classes 4 - 6 for scaffolding according to DIN EN 12811-1:2004. The use of a roof guard is accounted for in the standard design.

With extensive and functionally aligned accessories, the system is ableto achieve a degree of flexibility that also enables scaffolding for difficult objects.

Your satisfaction is our success

3

Good reasonsfor choosing UNI 70/100:

Efficiencythrough quick assembly and dismantling

High returns through long service life

Safety through certified quality management

Flexibilitythrough our extensive product range

Strongup to 6 kN/m2 full surface up to 10 kN/m2 as partial surface load

*Further details can be found in the approval letters and certifications which we would be please to send to you upon request.

Reasons for you to become our partner:

• WemanufactureourproductsinGermany.

• WeareDINEN9001and14001certified.

• Wesecuretheveryhighestproductqualitywithdynamicqualitymanagement.

• Thankstoourextensivestoragecapacitiesandshortdecision-makingpathsweensure

Short-term material availability.

• Wesupportyouwithyourprojectsasearlyastheplanningphase.

• Weensureglobalon-timeshipment.

MJ-Gerüst GmbH – top-quality scaffolding "Made in Germany"

MJ-Gerüst GmbH, headquartered in the town of Plettenberg in the German province of Sauerland,

is part of a strong group of companies, that looks back on 50 years of company history. MJ's core

competencies focus on the production and worldwide sale of high-quality scaffolding systems made of

steel or aluminium that offer virtually infinite possibilities in terms of modern system scaffolding.

A company of the JUNIOR Group

MJ-Gerüst GmbH based in Plettenberg. Germany

Essential benefits of the UNI 70/100 systemat a glance:

Set up adjustable base jacks, place lower diagonal fasteners, mounting guard rails (only in the diagonal field).

Put on the vertical frame. Assemble diagonals via swivel pins.

4

Structure of the system

❍ Horizontal bracing with round bolt deck arresting.

❍ Short assembly times without the use of any additional tools due to modular structure.

❍ High safety features: Decks are firmly arrested to the vertical frames. Inherent and moving loads are directly absorbed by the decks placed on the vertical frames.

❍ No „tripping hazards“ caused by protruding parts of the frame.

❍ Independent perpendicular adjustment with fixed knot connections. After initial alignment of the lowest levels the adjustment for all further scaffold levels takes place automatically.

❍ much working space caused by outside mounted diagonals.

❍ Decks made of timber, steel and aluminium.

*

1 2 3

Scaf fo ld ing Systems

Mount decks, align perpendicularly to guardrail and frame with water level.

Mount access decks. Assemble vertical frames and decksof the next level, then mount diagonals,guardrails and toeboards.

5

Structure of the system *

* Please also observe our assembly and user instructions!

Simple.

Fast.

Safe.

4 5 6

Scaf fo ld ing Systems

6

UNIFrames

VERTICAL FRAME, STEELSteel tube Ø 48.3 mm x 2.7 mm, hot-dip galvanised, with round bolts for deck placement. Self-locking swivel pins for guard rails and diagonals.PU: 25 pieces (height 2.00 + 1.50 m) 50 pieces (height 1.00 + 0.50 m)

VERTICAL FRAME, STEELlike before, but with 4 inside swivel pins.PU: 25 pieces

VERTICAL FRAME, ALUMINIUMAluminium tube Ø 48.3 mm x 4.00 mm.Otherwise like the steel frame.PU: 25 pieces (height 2.00 + 1.50 m) 50 pieces (height 1.00 + 0.50 m)

VERTICAL FRAMES, STEELSteel tube Ø 48.3 mm x 3.2 mm,hot-dip galvanised, 3-boardPU: 25 pieces (height 2.00 + 1.50 m) 50 pieces (height 1.00 + 0.50 m)

like before, but with 4 inside swivel pins.PU: 25 pieces

SIDE BRACKET FRAMESteel tube Ø 48.3 x 3.2 mm, hot-dip galvanised. To be used to overcome problems due to horizontal protrusion in façade, e.g. roof gutters.PU: 25 pieces

2.00 0.70 16.80 000004 70.90

1.50 0.70 15.00 000267 68.90

1.00 0.70 11.30 000025 63.90

0.50 0.70 8.50 000026 58.90

2.00 0.70 17.40 000649 75.50

2.00 0.70 8.70 000252 103.00

1.50 0.70 7.50 000268 89.00

1.00 0.70 5.80 000253 84.00

0.50 0.70 4.20 000254 78.00

2.00 1.10 22.20 000601 94.90

2.00 1.10 22.00 000027 90.90

1.50 1.10 19.20 000269 79.90

1.00 1.10 15.00 000028 73.00

0.50 1.10 12.20 000029 70.00

2.00 0.70 20.60 000276 91.00

2.00 1.10 23.50 000277 99.00

Heightm

Widthm

Weightapprox. kg

ArticleNo.

PriceEuro

7

UNIFrames

FALL ARREST FRAMESteel tube Ø 48.3 mm, hot-dip galvanised.For extending the UNI 70 scaffold by one board width. Particularly suited for the erection of fall arrest scaffolds to DIN 4420. Offers the possibility to useas an adaptor frame when converting from UNI 70 to UNI 100.PU: 25 pieces

CONVERSION FRAMESteel tube Ø 48.3 mm, hot-dip galvanised.Allows the conversion from a single-boardscaffold from a single board scaffold to UNI 70 scaffold. PU: 25 pieces (only with height 2.00 m)

VERTICAL FRAME, STEEL 1-board, steel tube Ø 48.3 mm, hot-dip galvanised. To lay just a single timber, steel or aluminium deck. PU: 25 pieces (height 2.00 m) 50 pieces (height 1.00 m)

WALK-THROUGH FRAME TRUSS BEAMSteel tube Ø 48.3 mm hot-dip galvanised, wide openingfor pedestrians and pedestrian protection in the lowermost scaffold level.

WALK-THROUGH FRAME STANDARDSteel tube Ø 48.3 mm, hot-dip galvanised.

2.00 – 7.50 000046 33.00

4-board – 1.50 18.50 000043 107.50

5-board – 1.80 22.00 000045 128.50

2.00 0.40 14.50 000270 70.50

1.00 0.40 9.50 000271 61.00

2.00 0.70/0.40 18.00 000278 85.00

Heightm

Widthm

Weightapprox. kg

ArticleNo.

PriceEuro

2.00 1.10/0.70 21.50 000281 98.00

TIMBER DECKWaterproofed, with galvanised deck caps, 48 mm thick, usable on both sides,multi-bloc glued.PU: 60 pieces

STEEL DECKHot-dip galvanised, perforated,non-slip surface and easy to stack.If length is 2.50m with handles.PU: 60 pieces

ALUMINIUM DECKUsable on both sides, and anti-slipping, box profile with 5 bearing longitudinal bars, very robust high-capacity model.PU: 60 pieces

DECK CONNECTORSteel, hot-dip galvanised, to connect 2 aluminium boards Only required with 4.00 meter aluminium decks.

UNIDecks

8

– – – 0.10 000311 7.00

3 3.00 0.32 22.00 000030 58,10

4 2.50 0.32 18.20 000032 52,90

5 2.00 0.32 14.50 000034 46.00

6 1.50 0.32 11.50 000035 39.30

6 1.10 0.32 8.50 000175 34.70

6 0.70 0.32 6.00 000176 29.90

4 3.00 0.32 23.00 000036 77.10

5 2.50 0.32 19.50 000037 67.80

6 2.00 0.32 15.50 000038 62.00

6 1.50 0.32 12.50 000039 55.00

6 1.10 0.32 9.50 000042 49.00

6 0.70 0.32 7.00 000040 48.00

3 4.00 0.32 19.00 000310 199.00

4 3.00 0.32 14.00 000313 112.00

5 2.50 0.32 11.50 000315 96.00

6 2.00 0.32 9.50 000316 92.00

6 1.50 0.32 7.00 000317 81.00

Loadclass

Lengthm

Widthm

Weightapprox. kg

ArticleNo.

PriceEuro

9

UNIDecks I Scaffold access - inside -

DECK WITH PLYWOOD PANELWater resistant surface, non-slip and lightweight veneer panels BFU 100 G-12.PU: 14 pieces

DECK WITH ALUMINIUM PANELWith non-slip aluminium decking, weather resistant, lightweight and robust.PU: 14 pieces

ALUMINIUM ACCESS DECK+ ALUMINIUM LADDERWith plywood panel and aluminium ladder.Water resistant top surface, non-slip and lightweight.Veneer panels BFU 100 G-12 (G-Guard).PU: 14 pieces

FULL ALUMINIUM ACCESS DECK + ALUMINIUM LADDERWith non-slip aluminium panel and internal aluminium ladder. Weather resistant, lightweight and robust. Available for2.00 m lengths with telescopic aluminium ladder.PU: 14 pieces

3 3.00 0.63 23.50 000307 159.00

3 2.50 0.63 21.00 000306 149.00

3 2.00 0.63 17.50 000305 137.00

3 3.00 0.63 18.00 000430 199.00

4 2.50 0.63 15.00 000431 176.00

4 2.00 0.63 14.00 000432 149.00

4 1.50 0.63 12.00 000433 125.00

3 3.00 0.63 28.00 000387 295.00

3 2.50 0.63 25.00 000388 258.00

3 3.00 0.63 25,00 000390 304.00

3 2.50 0.63 22,50 000389 271.00

4 2.00 0.63 19,00 000391 274.50

Loadclass

Lengthm

Widthm

Weightapprox. kg

ArticleNo.

PriceEuro

10

UNIScaffold access - outside -

OUTSIDE STAIRCASE HANDRAILSteel, hot-dip galvanised, for bay 2.50m.

INSIDE STAIRCASE HANDRAIL Steel staircase handrail for aluminium stairs.Hot-dip galvanised.

STEP ACCESS PLATFORM BRACKETTo set up a stairway with a pre-assembled scaffold bay.

DISTANCE COUPLERSteel tube Ø 48.3 mm with two welded couplers, galvanised. Is used as a connection between facade scaffold and stairway.

f. bay 2.50 m 3.25 0.64 22.50 000417 339.00

3.45 – 16.00 000426 101.00

2.25 – 11.50 000425 94.00

0.50 0.30 7.50 000234 74.00

– 0.18 2.00 000233 16.75

Lengthm

Widthm

Weightapprox. kg

ArticleNo.

PriceEuro

ALUMINIUM STAIRS WITH PLATFORMfor bay height 2.00 m.Single load according to DIN EN 12811-1. Comfortable outside access for extensive use of scaffold and when transporting bulky material.

11

UNIVertical bracing I Adjustable base

DIAGONAL BRACESteel tube Ø 48.3 mm, hot-dip galvanised. Hooked in at the upper swivel pin on the vertical frame. With 3rd hole for fixing in connection with swivel pin coupler and hanging transoms. The arrangement of the diagonal brace ensures a perpendicular scaffold structure. PU: 50 pieces

LOWER DIAGONAL FASTENERFor fastening the diagonals at ground level.For each diagonal bay 2 lower diagonal fasteners and 1 single guardrail are required.

BASE JACKfor large loads. Steel, with grip nut, galvanised, fast action thread, base plate 150 mm x 150 mm. Slip lock on grip nut. Can also be used as head plate.

BASE JACK, PIVOTING see base jack. but also with pivoting plate. 150 mm x 150 mm. Additional longitudinal scaffold bracing at base required.

ADJUSTMENT TUBEFor levelling unequal ground. Use in connection with a starting transomand base jack.Steel, hot-dip galvanised. Adjustment range 10 x 0.10 m = 1.00 m.

f. bay 4.00 m

f. bay 3.00 m

f. bay 2.50 m

f. bay 2.00 m

f. bay 1.50 m

1.70 5.80 000402 37.50

– 0.50 000089 5.40

4.53 13.80 000231 36.50

3.66 11.00 000079 27.50

3.26 9.50 000080 25.40

2.88 8.00 000081 23.50

2.56 7.50 000082 21.20

0.50 3.10 000323 29.00

0.30 2.40 000318 12.00

0.50 3.10 000319 14.50

0.60 3.40 000320 15.00

0.78 3.90 000321 19.00

1.00 4.70 000322 24.00

Lengthm

Weightapprox. kg

ArticleNo.

PriceEuro

12

UNISide guard

SINGLE GUARD RAILSteel tube, galvanised, pressed and punched at the ends. Time saving fitting by using the frames self-locking swivel pins, no tools are needed for assembly.PU: 100 pieces

TOEBOARDImpregnated timber with galvanised fittings for hooking in the toeboard-pins of the frames and guard rail posts. Completes the three-part side guard. PU: 80 pieces

END TOEBOARDTimber, waterproofed, with galvanised fittings, completes the protection at the ends.

SINGLE END GUARDRAILSteel tube Ø 33.7 mm, hot-dip galvanised. Used as single or double end protection.PU: 25 pieces

DOUBLE END GUARDRAILLike before. For completing protection at the ends.PU: 25 pieces

TOP END GUARD FRAME, STEELSteel tube Ø 48.3 mm, hot-dip galvanised, side guard and decking fastener on the top scaffold platform.PU: 25 pieces

INTERIOR HANDRAIL SUPPORTWITH TOEBOARD PINSteel, hot-dip galvanised with 2 welded-ontilting pins for attaching additional interiorguard rails on vertical frames.VE: 50 Stück

0.70 0.15 1.50 000073 11.75

1.10 0.15 2.00 000074 12.00

4.00 – 9.00 000202 29.10

3.00 – 5.50 000048 16.50

2.50 – 4.00 000049 15.70

2.00 – 3.50 000050 15.00

1.50 – 2.50 000052 14.10

1.10 – 2.00 000205 13.00

0.70 – 1.50 000206 12.50

4.00 0.15 10.00 000183 40.50

3.00 0.15 6.50 000066 16.85

2.50 0.15 5.50 000069 15.85

2.00 0.15 4.50 000070 14.10

1.50 0.15 3.00 000071 13.35

1.10 0.15 2.50 000184 13.00

0.74 0.15 2.00 000186 12.75

– 0.70 2.00 000059 13.50

– 1.10 3.00 000060 15.75

– 0.70 9.70 000064 51.50

– 1.10 13.80 000065 56.00

– 0.70 3.00 000061 24.50

– 1.10 4.00 000062 26.90

Lengthm

Widthm

Weightapprox. kg

ArticleNo.

PriceEuro

0.99 – 2.60 006136 28.90New

13

UNIScaffold end

SINGLE GUARD RAIL POST Steel tube Ø 48.3 mm, hot-dip galvanised, for locating guardrails on the top scaffold platform.PU: 50 pieces

UPPER DECKING FASTENERIn conjunction with the guardrail post for fastening the decking on the top scaffold platform.PU: 50 pieces

TOP INTERMEDIATE POSTSteel tube Ø 48.3 mm / 33.7 mm for lo-cating handrail and fastening decking on the top scaffold platform.PU: 50 pieces

GUARD RAIL POSTSteel tube Ø 48.3 mm, hot-dip galvanised. With joint pin and short decking fastener.PU: 50 pieces

GUARD RAIL POSTLike before, but without joint pin.PU: 50 pieces

PROTECTIVE MESH POSTSteel tube Ø 48.3 mm, hot-dip galvanised. For fastening the decking on the top scaffoldplatform and mounting the side protection mesh and protective nets in combination with guard railis. Particularly suitable for the erection of roof guard and roof guard scaffolds according to DIN 4420.PU: 50 pieces

GUARD RAIL POST 2.00 mSteel tube Ø 48.3 mm, hot-dip galvanised. Not for guard scaffolds.PU: 50 pieces

– 0.70 2.00 000087 16.00

– 1.10 2.50 000088 20.25

1.00 0.70 5.00 000077 31.90

1.00 1.10 6.50 000078 32.90

2.00 0.70 11.50 000140 74.00

2.00 1.10 12.00 000244 74.50

1.00 – 4.50 000398 29.00

1.00 – 4.00 000630 25.50

2.00 – 8.00 000245 53.50

1.00 – 3.50 000075 20.75

Lengthm

Widthm

Weightapprox. kg

ArticleNo.

PriceEuro

14

UNIScaffold expansion

HOP-UP BRACKET 0.32 up to load class 3Steel, hot-dip galvanised, with half coupler. Used to extend the scaffold on the inside or out-side by one 32 cm-wide system board. With joint pin for single guard rail posts.PU: 25 pieces

HOP-UP BRACKET 0.32 without joint pin – up to load class 3Like before, but without joint pin.Simply use with board fastener.PU: 20 pieces

HOP-UP BRACKET 0.64Steel, hot-dip galvanised. With half coupler. Used to extend the scaffold on the inside or outside by two system boards and to extend the ends.PU: 20 pieces

HOP-UP BRACKET 0.96Steel, hot-dip galvanized, with two half couplers welded on. Used to extend the scaffold on the inside or outside by three system boards and to extend the ends.Additional support using prop strut. PU: 20 pieces

HOP-UP BRACKET 0.74Steel, hot-dip galvanised. Used to make scaffold lift adaptations of one UNI 70 vertical frame width. Unlike hop-up bracket 0.64, the adaptation is not only possible at the decking height, but can be made at any required height. Used to extend the scaffold by two system boards and for erecting guard and roof guard scaffolding.PU: 20 pieces

HOP-UP BRACKET 1.10As HOP-UP BRACKET 0.74, but for UNI 100 vertical frame.PU: 20 pieces

0.32 3.00 000092 31.75

0.32 4.00 000091 39.00

0.70 8.00 000094 55.00

1.10 9.00 000099 62.00

0.74 10.00 000095 64.00

1.10 11.50 000096 80.00

Widthm

Weightapprox. kg

ArticleNo.

PriceEuro

15

UNIScaffold expansion I Roof guard

PROP STRUTSteel tube Ø 48.3 mm, hot-dip galvanised. For hop-up brackets when buildingadditional lifts or for roof guard scaffolds.

FILLER DECK, STEELGap closure for 0.64 m and 0.74 m hop-up brackets.

BRACKET FASTENER For alcove hop-up brackets.

ROOF GUARD EXTENSIONSteel, hot-dip galvanised. Used together with hop-up bracket 0.64 or 0.96 and lock against lift-off.Accords to DIN 4420.

LOCK AGAINST LIFT-OFFSteel, hot-dip galvanised.Suitable for use with roof guard extension.

– 0.70 4.00 000143 25.50

0.70 0.45 2.00 000246 36.00

0.40 – 1.50 000100 22.00

3.00 – 14.50 000247 77.00

2.50 – 13.00 000248 63.50

2.00 – 11.50 000249 56.00

1.50 – 10.00 000250 47.00

for bracket 2-board. 1.80 – 9.00 000101 37.75

for bracket 3-board. 2.00 – 10.00 000102 39.50

Lengthm

Widthm

Weightapprox. kg

ArticleNo.

PriceEuro

16

UNIRoof guard scaffolds

PROTECTION FENCEHot-dip galvanised for protection of roofers. Replaces three-part side guard as per DIN 4420. Assembly side by side and/or one on top of the other by using self-locking swivel pins.

WEATHER PROTECTION POSTSteel, hot-dip galvanised.Incl. 3 swivel pins for fastening tarpaulins and tarp battens (guard rails), with connecting piece for guard rail posts.

ROOFERS BRACKETFor protection of roofers.For use in roof guard scaf-folds (load class 3)Steel, hot-dip galvanised.

Scaffold protection tarp. see price

list for “universal accessories”.

3.00 1.00 25.00 000137 130.00

2.50 1.00 22.00 000138 112.00

2.00 1.00 19.00 000139 94.00

1.50 1.00 16.00 000284 86.00

2.00 – 12.00 000142 76.00

– 0.70 15.00 000274 131.00

Lengthm

Heightm

Weightapprox. kg

ArticleNo.

PriceEuro

17

UNITransoms

INTERMEDIATE TRANSOMSteel, hot-dip galvanised. With half couplers, for locating decks in any level or for fitting decks in bridging beams.

PLATFORM TRANSOMSteel, hot-dip galvanised. Like before, but designed for building a continous platform level between the scaffolds without gaps.

DECKING TRANSOM Steel, hot-dip galvanised. For fixing decks or staircases just above ground level. May also be used in conjunction with adjustment tubes.

HANGING TRANSOMSteel, hot-dip galvanised. For cantilevered end elevations, and/or for bridging up to a 6.00 m span. Use in conjunction with diagonals and couplers with swivel pin.

CONVERSION TRANSOMSteel, hot-dip galvanised. With this transom, conversion from the UNI 100 system to the UNI 70 system can be easily achieved.

LATTICE BEAM BASE PLATESteel, hot-dip galvanised.Use in connection with a decking transom.For further expansion of scaffold pattern when bridging with lattice beams.

DECK TRANSOMFOR LATTICE BEAMSSteel, hot-dip galvanised. Placed on lattice beams or tubes andcovered with system decks.Guarantees smooth deck surface fordeck scaffolds. Please specifyA/F width with your order!

– 0.70 4.00 000103 32.50

– 1.10 4.50 000105 45.75

– 0.70 4.50 000106 39.75

– 1.10 5.00 000107 52.00

– 0.70 4.00 000219 34.00

– 1.10 4.50 000220 41.00

– 0.70 6.00 000171 41.00

– 1.10 7.00 000218 50.50

– 1.10 15.00 000236 88.00

– – 6.00 000235 39.50

2-board 0.70 – 2.70 000216 29,00

3-board 1.00 – 4.65 000207 42,00

4-board 1.30 – 6.00 000210 44,50

5-board 1.60 – 7.50 000211 67,00

6-board 1.95 – 9.00 000212 83,00

7-board 2.25 – 9.75 000213 85,00

8-board 2.55 – 11.25 000214 109,50

Lengthm

Widthm

Weightapprox. kg

ArticleNo.

PriceEuro

Special orders on request!

18

UNIAnchoring

WALL TIE WITH PLATESteel tube Ø 48.3 mm, hot-dip galvanised.Installation with a standard coupler.

WALL TIESteel tube Ø 48.3 mm, hot-dip galvanised.Installation as short scaffold tie with one standard coupler, as long scaffold tie with two standard couplers.

DOUBLE COUPLERHeavy-duty model, ribbed, class B (BB)in compliance with DIN 4420 and EN 74. Steel, drop-forged, galvanised for the connection of scaffold tubes. With collar nuts 19 mm or 22 mm width A/F. Approved load of 9 kN (900 kg) as single coupler or double coupler for 15 kN (1500 kg). Tightening torque of collar nuts 50 Nm.From 1.000 pieces - ask for net price!PU: 25 pieces

SWIVEL COUPLERHeavy-duty model. ribbed. class B according to DIN 4420 and EN 74. Drop-forged steel, galvanised, to connect scaffold tubes at any angle. With collar nuts 19 mm or 22 mm A/F range. Allowable load 6 kN (600 kg). Tightening torque of collar nuts 50 Nm.From 1.000 pieces - ask for net price!PU: 25 pieces

EYE-BOLTgalvanised.

EXPANDING PLUGFor eye-bolts with a timber thread Ø 12 mmfor drillings Ø 14 mm.

PLASTIC CAPFor closing anchor drill holes.

Special couplers. see price list for

"universal accessories".

A/F 22 – 1.15 000325 5.00

A/F 19 – 1.10 000326 5.00

A/F 22 – 1.35 000328 5.50

A/F 19 – 1.30 000329 5.50

0.70 2.70 000124 14.25

0.30 1.40 000240 9.35

0.40 1.80 000242 9.75

0.50 2.00 000125 10.00

0.60 2.60 000241 12.00

1.00 3.80 000127 12.75

1.30 4.80 000131 15.50

1.50 5.50 000132 16.50

0.09 0.155 000358 1.00

0.12 0.175 000359 1.10

0.16 0.210 000360 1.20

0.19 0.235 000363 1.25

0.23 0.265 000361 1.30

0.35 0.364 000362 1.70

0.07 0.007 000357 0.25

– 0.003 000651 0.15

Lengthm

Weightapprox. kg

ArticleNo.

PriceEuro

19

UNIMobile towers I Single parts I

Spare parts I Storage



STEEL BEAM 170Steel, hot-dip galvanised, suitable with scaffold parts of the UNI 70 as mobile scaffold.

STEEL BEAM 300Steel, hot-dip galvanised, suitable with scaffold parts of the UNI 100 as mobile scaffold, and/or with scaffold parts of the UNI 70 and platform transom 1.10 as mobile ceiling scaffold.

CASTOR WITH SPINDLE1.000 kg maximum load, with nylon wheel, withmounted spindle height adjustable.For steel beam.

SCAFFOLD PALLET FOR FRAMESFor standing palletisation.Load capacity 20 scaffold frames,hot-dip galvanised.

STACKING PALLET FOR TUBESSpecially for pallets suited for module scaffolds, standards, ledgers, guardrails, diagonal braces, tubes and toeboards. Open all round, suited for stacked and crane transports. The tubular supports are removable and secured in the base frame, so that empty pallets can be transported in a space-saving manner.Steel tube, hot-dip galvanised.

BASIC COUPLERT-carrier plate with two parallel welded half couplers to bear vertical loads of scaffold constructions. To be mounted directly to the building. Extensive lattice beam constructions are no longer necessary. Basic structural analysis available.

SWIVEL PIN COUPLERDrop-forged steel, hot-dip galvanised,Half coupler with collar nut 19 mm or 22 mm A/F range and welded toggle.

1.70 – 19.00 000149 98.00

3.00 – 29.00 000168 173.50

– – 7.00 000332 88.50

1.25 0.70 32.00 006043 194.00

1.25 1.00 37.00 006104 236.00

1.25 0.85 35.00 005614 155.00

A/F 22 – – 3.60 003247 32.50

A/F 19 – – 3.60 004591 32.50

A/F 22 – – 0.80 000134 7.90

A/F 19 – – 0.80 002354 7.90

Lengthm

Widthm

Weightapprox. kg

ArticleNo.

PriceEuro


20

Scaffold bay length 2.50 mScaffold length (m) x Working height (m)Working surface

100.00 x 10.201020 m2

50.00 x 10.20510 m2

30.00 x 10.20306 m2

15.00 x 10.20153 m2

10.00 x 10.20102 m2

UNI 70Scaffold examples

BASIC EqUIPMENT

Vertical frame, steel 2.00 m x 0.70 m 164 84 52 28 20

Timber deck 2.50 m x 0.32 m 320 160 96 48 32

Diagonal brace f. bay 2.50 m 32 16 12 8 4

Single guard rail 2.50 m 328 164 99 50 33

Toeboard 2.50 m 160 80 48 24 16

End toeboard 0.70 m 8 8 8 8 8

Double end guardrail 0.70 m 6 6 6 6 6

Top intermediate post 0 m 39 19 11 5 3

Top end guard frame, steel 0.70 m 2 2 2 2 2

16 8 6 4 2

Base jack 0.30 m 82 42 26 14 10

39.712.50 20.166.10 12.424.40 6.586.10 4.554.60

11.524.00 5.820.00 3.565.00 1.862.00 1.266.00

Price per m2 in € 38.93 39.54 40.60 43.05 44.65

ANCHORING

43 23 15 9 7

43 23 15 9 7

43 23 15 9 7

43 23 15 9 7

649.30 347.30 226.50 135.90 105.70

120.00 64.00 42.00 25.00 20.00

70.90

52.90

25.40

15.70

15.85

11.75

24.50

31.90

51.50

5.40

12.00

–

–

–

8.75

5.00

0.25

1.10

–

–

258.00

271.00

148.00

176.00

67.80

103.00

000004

000032

000080

000049

000069

000073

000061

000077

000064

000089

000318

–

–

–

000240

000325

000357

000359

–

–

000388

000389

000306

000431

000037

000252

Total price in €

Total weight (kg)

Wall tie 0.30 m

Double coupler with collar nut A/F 22

Expanding plug

Eye-Bolt 12 mm x 120 mm

Total price in €

Total weight (kg)

with decking fastener 1.00 m x 0.70 m

Lower diagonal fastener

List price

€

Article no.

ADDITIONAL EqUIPMENT

Extra charge E access decks (plywood) *

Total price in € 608.80 608.80 608.80 608.80 608.80

Extra charge E access decks (aluminium) *

Total price in € 660.80 660.80 660.80 660.80 660.80

Extra charge E frame panels (plywood) *1)

Total price in € 6.752.00 3.376.00 2.025.60 1.012.80 675.20

Extra charge E frame panels (aluminium) *1)

Total price in € 11.232.00 5.616.00 3.369.60 1.684.80 1.123.20

Extra charge E steel decks instead of wood

Total price in € 4.768.00 2.384.00 1.430.40 715.20 476.80

Extra charge E vertical frames (alu) instead of steel

Total price in € 5.264.40 2.696.40 1.669.20 898.80 642.00

* when using 4 access-deck panels instead of 8 wood decks. *1) when using frame panels instead of wood decks.


99.00 x 10.201.010 m2

51.00 x 10.20520 m2

30.00 x 10.20306 m2

15.00 x 10.20153 m2

9.00 x 10.20

92 m2

21


BASIC EqUIPMENT

Vertical frame. steel 2.00 m x 0.70 m 136 72 44 24 16

Timber deck 3.00 m x 0.32 m 264 136 80 40 24



Toeboard 3.00 m 132 68 40 20 12



Top intermediate post 0 32 16 9 4 2

Top end guard frame 0.74 m 2 2 2 2 2

14 8 4 2 2

Base jack 0.30 m 68 36 22 12 8

34.702.90 18.231.80 10.931.30 5.775.50 3.768.10

11.129.00 5.809.00 3.447.00 1.782.00 1.136.00

Price per m2 in € 34.37 35.05 35.72 37.75 41.05

ANCHORING

36 20 13 8 6

36 20 13 8 6

36 20 13 8 6

36 20 13 8 6

543.60 302.00 196.30 120.80 90.60

100.00 56.00 36.00 22.00 17.00

70.90

58.10

27.50

16.50

16.85

11.75

24.50

31.90

51.50

5.40

12.00

–

–

–

8.75

5.00

0.25

1.10

–

–

295.00

304.00

159.00

199.00

77,10

103,00

000004

000030

000079

000048

000066

000073

000061

000077

000064

000089

000318

–

–

–

000241

000325

000357

000359

–

–

000387

000390

000307

000430

000036

000252

Total price in €

Total weight (kg)

Wall tie 0.30 m


Expanding plug


Total price in €

Total weight (kg)



List price

€

Article no.

* when using 4 access-deck panels instead of 8 wood decks. *1) when using frame panels instead of wood decks.



Total price in € 715.20 715.20 7.15.20 715.20 715.20


Total price in € 751.20 751.20 751.20 751.20 751.20

Extra charge E frame panels (plywood) *1)

Total price in € 5.649.60 2.910.40 1.712.00 856.00 513.60

Extra charge E frame panels (aluminium) *1)

Total price in € 10.929.60 5630.40 3.312.00 1.656.00 993.60


Total price in € 5.016.00 2.584.00 1.520.00 760.00 456.00

Extra charge E vertical frames (alu) instead of steel

Total price in € 4.365.60 2.311.20 1.412.40 770.40 513.60

22



100.00 x 10.201020 m2

50.00 x 10.20510 m2

30.00 x 10.20306 m2

15.00 x 10.20153 m2

10.00 x 10.20102 m2

ANCHORING

43 23 13 9 7

43 23 13 9 7

43 23 13 9 7

43 23 13 9 7

649.30 347.30 196.30 135.90 105.70

120.00 64.00 36.00 25.00 20.00

BASIC EqUIPMENT

Vertical frame, steel 2.00 m x 1.10 m 164 84 52 28 20

Timber deck 2.50 m x 0.32 m 480 240 144 72 48



Toeboard 2.50 m 160 80 48 24 16



Top intermediate post 0 m 39 19 11 5 3

Top end guard frame 1.10 m 2 2 2 2 2

16 8 6 4 2

Base jack 0.30 m 82 42 26 14 10

51.520.90 26.122.50 16.040.00 8.446.10 5.829.40

15.366.00 7.760.00 4.743.00 2.470.00 1.684.00

Price per m2 in € 50.51 51.22 52.42 55.20 57.15

90.90

52.90

25.40

15.70

15.85

12.00

26.90

32.90

56.00

5.40

12.00

–

–

–

8.75

5.00

0.25

1.10

–

–

258.00

271.00

96.00

67.80

000027

000032

000080

000049

000069

000074

000062

000078

000065

000089

000318

–

–

–

000240

000325

000357

000359

–

–

000388

000389

000315

000037

Info Hotline +49 (23 91) 81 05-350

We look forward to your call!

List price

€

Article no.

Total price in €

Total weight (kg)

Wall tie 0.30 m


Expanding plug


Total price in €

Total weight (kg)





Total price in € 608.80 608.80 608.80 608.80 608.80


Total price in € 660.80 660.80 660.80 660.80 660.80

Extra charge E alu decks instead of wood

Total price in € 20.688.00 10.344.00 6.206.40 3.103.20 2.068.80


Total price in € 7.152.00 3.576.00 2.145.60 1.072.80 715.20

* when using 4 access-deck panels instead of 8 wood decks.

23

Fax order form

Company:

Name of buyer

Customer no. (if applicable)

Product description Article no. Quantity Unit price / E Total value / E

❍Order ❍Inquiry

City / Date

Order no.

Contact

Date of delivery

Shipping method

Terms of delivery

Packaging costs

Other

Copy this form and fax to +49 (23 91) 81 05-375

All prices are excl. of VAT applicable at the time of shipment. All dimensions and weights are non-binding approximate values. Technical data is subject to change All prices are excl. of VAT applicable at the time of shipment.All dimensions and weights are non-binding approximate values.Technical data is subject to change without notice. Technical data is subject to change without notice. Prices are charged as applicable on the day of shipment. Sale is subject exclusively to our sales terms and delivery conditions. In brief: place of business and jurisdiction is Plettenberg. Extended reservation of property rights until full payment of all our outstanding accounts receivables. Our prices are ex works.

Order value / E

Terms of payment

MJ consultant

Shipping address:

Customer signature

MJ-Gerüst GmbH Ziegelstraße 68 I D-58840 PlettenbergTelephone: +49 (23 91) 81 05 - 350

[email protected] I www.mj-geruest.de

Exectuive Board: Gerhard Junior. Rainer Junior. Josef Engels I Headquarters: 58840 Plettenberg I Register court: AG Iserlohn HRB 2898 I VAT ID.: DE123839437

© M

J-Ger

üst Gm

bH · U

NI 70

/100

· G

B · E

ditio

n 01

.10.

2011

Further companies of the Junior Company Group:

Junior Kühlkörper GmbHPrecision components for the electronic and electrical industrywww.kuehlkoerper.de

MJ - Modul Rent GmbHSale and rental of room containers for housing estates, office buildings, industrial and commercialwww.mj-modulrent.de

MJ-Gerüst GmbH

Ziegelstraße 68D - 58840 Plettenberg

Telephone +49 (23 91) 81 05 -350 Fax +49 (23 91) 81 05 -375 email [email protected]

www.mj-geruest.de

Berlin office

PoratzstraßeD - 16225 Eberswalde

Stark gerüstet.Scaf fo ld ing Systems

facade scaffolding uni 70/100 -...

Documents