1000 East Bald Eagle Street

Lock Haven, PA 17745

P: 570.748.4009

F: 570.748.4324

info@faberfab.com

www.faberfab.comLike Us On Facebook

GPS Coordinates:Latitude: (North) +41.13273

Longitude: (West) -77.42494

24HOUR

EMERGENCY SERVICE

(570) 660.8711

STRUCTURAL/PIPEWELDING Specializing in 1/8 inch through 1” thick material, we execute aluminum, stainless steel or carbon steel welding projects with state-of-the-art manual, semi-automatic or fully automatic robotic welding equipment.

• AWS D.1.1 (Structural) and ASME Section IV (Pipe)

• Structural projects expedited by in-house

• Pipe shop is set up to

steel and stainless steel pipe.

• Semi-automatic weld manipulators and robotic welder produce welds at a rate and quality that is unmatched by any other process.

FABRICATION At FaberFab, fabrication is the art of combining pipe, plate, structural shapes and vendor supplied components with our capabilities to burn, cut, saw, machine, bend, roll, form, weld

manner.

• Quick turn around

• High quality

• No job is too small or too large

• Walk in customers welcome.

REPAIR / REFURBISH No need to spend your budget on brand new equipment when we can make your well used items function and look like new at a fraction of the cost. Repair services:

• Repair & resurface rolls & shafts

• Sandblasting

• Identifying stress cracks with MPI testing

• Welding up stress cracks & inspect with MPI testing

• Machining new parts

• Checking/reconditioning bores

• Priming & Painting

S E R V I N G A L L Y O U R W E L D I N G , F A B R I C A T I O N & M A C H I N E S H O P N E E D S

Stock SteelSandblast Booth

Paint Booth

BreakCNCMills

Mobile Tank Skid

Meter Skid

Pipe Skid

Burn Table

Rolls

HorizontalBoringMill

CNC Lathes

Welding Trucks

Stock Sheet Material

Robot WelderWeld Manipulators

STOCK STEEL

FaberFab has the area’s most readily available inventory of

such as:

• Carbon Steel angle,

bar, H and I beams

• Steel pipe 1/8” through 20” cut to length

• A572 GR50 and A-36 Carbon Steel Plate 18GA through 4”

• 4140 and Carbon Steel rounds from ½” through 5” O.D.

• Materials for handrails, grating, structural repair.

MACHINING, TOOL & DIEWe tackle your machine shop projects with a skilled team, large capacity state-of-the-art CNC equipment served by overhead cranes and a large steel materials inventory. We promise high quality and the quickest possible turnaround on your machine shop projects.

• and repair

• We have the ability to machine parts weighing a few ounces up to 8,800 pounds.

• We stock a large selection of 1018, 304, 316, 4140 and 416 round stock and A-36 and A-572 Grade 50 plate.

• We can procure non-stock

our network of vendors.

SKIDS We can provide modular skids for many applications, including:

• Chemical Process

• Natural Gas Metering

• Water Metering, Treatment & Filtration

• Fuel Oil Pumping and Filtration

• Natural Gas, Digester Gas,

Control and Conditioning