external heat exchangers
TRANSCRIPT
IUC'IIIIC ._EIISION HIA~AIIIID CGrfIIIOLSCleveland Process Corp.Homestead, Fla.
Clepco's QuickPlug, the simple plug-in and heatsystem, has been improved and is now availablewith a microprocessor-based digital temperaturecontrol featuring greater accuracy and field selectable "FtC scales. A digital touchpad allows instant adjustment. The unit has a built-in temperature lockout switch. The moisture-tight plastichousing is rated NEMA 4. It is totally compatiblewith existing QuickPlug systems.
Circle 153 on reader information card
IX'IEIIIIAL HIATIXCIIAIIII8ERSAstroCosmos Metallurgical Inc.Camarillo, Calif.
ACX external heat exchangers are designed foruse where the tank is too small or too crowded forinternal coils or where the tank cannot accommodate enough square feet of tubing to yield thedesired plating solution temperature. Advantagesof the ACX include ultracompact size, externalmounting, superior efficiency, and low cost. Standard sizes range from 41/2 X 81/4 X 21/2 in. to 18 X101/2 X 21/2 in. All-welded construction of titaniumor stainless steel eliminates gasket leaks.
Circle 155 on reader Information card
October 1999
MCIIICULAnlll8 HIAT DCllAllllUIISTek-Temp Instruments Inc.Croydon, Pa.
Tek-Temp Instruments Inco's FK Series Heat Exchangers remove heat from process liquids directly to the ambient air by means of a radiatorand fan. Ideal application conditions are when thedesired circulating temperature is significantlyhigher than the ambient air temperature, and/orwhen the heat load is relatively small. Coolingcapacity is dependent on the process liquid flowrate and the difference between the circulatingand ambient temperatures. Positive displacementand centrifugal-type circulating pumps are available and are rated for continuous operation.
Circle 154 on reader information card
IIADIAL GAS BURIlIIRSCharles A. Hones Inc.Amityville, N. Y.A complete line of Buzzer radial gas burners areavailable through Charles A. Hones Inc. They aredesigned for applications requiring quick intensegas heat and are ideal for white-metal melting,boilers, water heating, chemical heating, blackoxide coating, evaporating, degreasing, hot rinsing, and other processing applications. The burners are recommended for solution heating becauseof their rugged design. All radial gas burners aredesigned to operate on either low (household)pressure natural or propane gas. They require noblowers, no compressed air, and no complicatedpiping to operate.
Circle 156 on reader information card
25