external gear utility pump unit - shoppumps.com · utility pump unit external gear standard...

2
UTILITY PUMP UNIT EXTERNAL GEAR Standard Features: Viking 1/3 HP Direct Drive Motor included (50/60 hz. motor as standard) Pumps utilize the Viking Spur Gear SG-05 model with a long history of quality and proven field performance Integrated manual thermal overload with a set point of 275°F/135°C for safety and unit protection 6’ Grounded Plug with On/Off Switch Portability with Built-in Handle Utility Pump Unit Contents: SG-0510 Pump 1/3HP ODP Motor 115V Grounded Plug Capacity - 4 GPM Viton ® O-rings and Lip Seals Fixed Relief Valve 50 PSI Cracking Pressure Note: Viton ® is a registered trademark of DuPont Performance Elastomers.

Upload: others

Post on 23-Jan-2020

7 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: EXTERNAL GEAR UTILITY PUMP UNIT - ShopPumps.com · UTILITY PUMP UNIT EXTERNAL GEAR Standard Features: Viking 1/3 HP Direct Drive Motor included (50/60 hz. motor as standard) Pumps

UTILITY PUMP UNITEXTERNAL GEAR

Standard Features:

Viking 1/3 HP Direct Drive Motor included (50/60 hz. motor as standard)

Pumps utilize the Viking Spur Gear SG-05 model with a long history of quality and proven field performance

Integrated manual thermal overload with a set point of 275°F/135°C for safety and unit protection

• 6’ Grounded Plug with On/Off Switch

• Portability with Built-in Handle

Utility Pump Unit Contents:• SG-0510 Pump

• 1/3HP ODP Motor

• 115V Grounded Plug

• Capacity - 4 GPM

• Viton® O-rings and Lip Seals

• Fixed Relief Valve

• 50 PSI Cracking Pressure

Note: Viton® is a registered trademark of DuPont Performance Elastomers.

Page 2: EXTERNAL GEAR UTILITY PUMP UNIT - ShopPumps.com · UTILITY PUMP UNIT EXTERNAL GEAR Standard Features: Viking 1/3 HP Direct Drive Motor included (50/60 hz. motor as standard) Pumps

VIKING PUMP, INC.A Unit of IDEX Corporation406 State Street Cedar Falls, Iowa 50613 U.S.A.Telephone: (319) 266-1741Fax: (319) 273-8157vikingpump.com

Distributed By:Contact Your Distributor Today

Europe & Africa vikingpump.comShannon, Ireland Phone: +353 (61) 471933

United States vikingpump.comCedar Falls, Iowa Phone: (319) 266-1741

Australia & New Zealand vikingpump.comAustralia Phone: +61 (0)2 4574 0448

Middle East www.idexfmt-asia.comDubai, UAE Phone: +971-4-260-0372

Latin America vikingpump.comMexico D.F., C.P. Phone: +52 (55) 5255-1357Brazil - Sao Paulo Phone: +55 (19) 3871-3500

Singapore Phone: +65-6684-7305India - Mumbai Phone: +91-22-6643-5563Korea - Seoul Phone: +82-19-9134-1110Canada

www.vikingpumpcanada.comWindsor, Ontario Phone: (519) 256-5438

Asia-Pacific www.idexfmt-asia.comChina - Shanghai Phone: +86-21-5241-5599

© Copyright 2016 Viking Pump, Inc. All Rights Reserved. Rev0216 | Form No. 345.1

NOMINAL FLOW RATES AVAILABLE*

Size

Standard Port

Nominal Capacity At Maximum Speed

Inches GPM LPM

SG-0510 ½ 4 15.1

MOTOR SPECIFICATIONS

1/3HP – Single Phase – 48YZ Frame

115/230 Volt

50/60 Hz

1425/1725 RPM

SPECIFICATIONSPUMP & MOTOR

MARKETS & APPLICATIONSCLEAN LIQUID TRANSFER PUMP

*One flow rate currently available, more to come

• Bulk Oil Transfer (Drum or Tote)

• Emergency Equipment Lubrication Back Up

• Used Oil Pick Up / Drop Off

• Hydraulic Oil Filling for Field Equipment

• Hydraulic and Parts Cleaner Service Pump

• Lubrication Stations

• Transformer Oil Service

• Glycol Transfer

• Hydraulics System Test

• Drip Pan Clean Up

• Draining Pipes / Pipelines for Service

• Compressor Oil Filling

• Low Speed Auxiliary Lubrication Pump

• Fryer Oils

• Gear Box Filling Unit

• Salvage Yard Vehicle Fluid Removal

• Temporary Alternative to Down Pump (Low Flow)