exterior systems and coatings designed for professionals.a second coat using a decorative sand...
TRANSCRIPT
Exterior systems and coatings designed for professionals.
Page 2
Cement RendersRSA MR 60 – Off-White Masonry Render 3
RSA MR 120 – Off-White Masonry Render 3
RSA MR 75 – Grey Masonry Render 3
RSA MR Coarse – Off-White Masonry Render 4
RSA MR Coarse – Grey Masonry Render 4
RSA EP Render – Grey 5
RSA EP Render – Off-White 5
RSA AAC Supa Flex 6
RSA Set & Prep 7
CCS BondKey 8
TexturesRSA Flexible Mineral Texture 9
RSA Polysand 800 10
RSA Polysand Fine 11
RSA Bling Coarse 12
RSA Trowel On 2mm 13
RSA Flexirender (untinted) 14
Protective Coating RSA Rapid Shield Matt 15
RSA Cleanskin 16
Primers, Sealers & PatchesRSA Patch Smooth 17
RSA Patch Coarse 17
RSA Patch Fine 17
RSA Render Bond 17
RSA Multiprime 17
RSA QT Lite Base 17
Contents
Page 3
RSA MR 60, Grey MR 75 and
MR 120 renders are pre-bonded
(10% wet bond equivalent),
polymer modified, cement
based renders that only require
the addition of potable water.
Available in either an off-white
or grey cement base with a
choice of setting times.
MR 60 – quicker set time
Grey MR 75 – medium set time
MR 120 – longer set time.
Features and Benefits
• Suitable for machine or hand application
• Provides a non ‘tacky’ formulation for easier application
• Available in three set times to suit differing on-site conditions
• Provides an extended ‘hang time’ for greater productivity and high early hardness
• Has great ‘straightening qualities’ and offers tear resistant screedability
• Possesses excellent ‘come back’ qualities for easy floating and finishing
• Pre-mixed – simply add water
Suitable Substrates
When applied in accordance with the most recent spplication instructions, Masonry Render is suitable for use over correctly prepared substrates including:
• Clay bricks
• Off-form concrete
• Concrete blocks
• Concrete slab edges
RSA Masonry Render – setting time
RSA Masonry Renders
are available in either an
off-white or grey cement
base, can be applied
in a single coat and are
suitable for use all
year round. Choose a
set time to suit on-site
conditions.
CEMENT RENDERS
RSA MR 75 – Grey Download TDS
RSA MR 60 – Off-white Download TDS
RSA MR 120 – Off-white Download TDS
Download SDSDownload SDSDownload SDS
click for product
page
Page 4
RSA Masonry Render Coarse
products are pre-bonded (10%
wet bond equivalent), polymer
modified, cement based
renders that only require the
addition of potable water.
Available in either grey or
off-white, MR Coarse has a
coarse grain finish that is ideal
for masking common
substrate irregularities.
Features and Benefits
• Greater sag resistance for applications requiring a thickness greater than 4mm
• Can be applied as a full render coating in one or two coats at 7-10mm thick and ‘screeded flat’
• Offers excellent screed-ability and easier floating and finishing
• Provides greater productivity and high early strength gains
• Offers an efficient initial set time which can be ‘brought back’
• Pre-mixed – simply add water
Suitable Substrates
When applied in accordance with the most recent application instructions, Masonry Render Coarse is suitable for use over correctly prepared substrates including:
• Clay bricks
• Off-form concrete
• Concrete blocks
• Concrete slab edges
RSA Masonry Render – Coarse
RSA MR Coarse is
available in either an
off-white or grey cement
base. With greater sag
resistance for thick
applications these
renders offer excellent
screedability.
CEMENT RENDERS
RSA Masonry Render Coarse – Off-white
Download TDS
RSA Masonry Render Coarse G – Grey
Download TDS
Download SDSDownload SDS
click for product
page
Page 5
RSA EP Renders are
pre-bonded (10% wet bond
equivalent), polymer modified,
cement based renders available
in either a grey or off-white
cement base.
Simple to use – just add
potable water.
RSA EP Renders’ higher
polymer content offers greater
flexibility and excellent
impact resistance.
Features and Benefits
• Suitable for machine or hand application
• Less rigid formulation (slightly less cement and higher polymer levels)
• Excellent impact resistance
• A well graded sand formula for easier application and floatability
• Excellent ‘come back’ qualities
• High adhesion to polystyrene and AAC substrates
• Available in grey or off-white base
• Pre-mixed – simply add water
Suitable Substrates
When applied in accordance with the most recent application instructions, RSA EP Renders are suitable for use over correctly prepared substrates including:
• Clay Bricks
• Concrete Blocks
• AAC Hebel
• Polystyrene
RSA EP Render – Grey or Off-White
RSA EP Render’s
dual binding system is
ideal for use over RSA
approved polystyrene
and AAC building
systems.
CEMENT RENDERS
RSA EP Render – Off-white
Download TDS
RSA EP Render – Grey
Download TDS
Download SDSDownload SDS
click for product
page
Page 6
RSA AAC Supa Flex is a fibre
reinforced, high polymer blend
that provides extra flex. Ideal
for lightweight cementitious
substrates, its superior
adhesion, extended ‘hang time’
and excellent ‘come back’
enables greater productivity and
long term peace of mind.
Features and Benefits
• Formulated for excellent crack control
• Excellent flexibility due to high polymer modifcation
• Fibre reinforced formula
• Superior adhesion
• Improved formula for easier floating and finishing
• Offers an efficient initial set time which can be brought back
• Tough, durable, scratch resistant surface
• Float or sponge for an attractive sandcoat finish
• Early hardness for easier floating
• Increased hang time for greater productivity
• Pre-mixed – simply add water
Suitable Substrates
RSA AAC Supa Flex is typically used as a single component system to cover AAC substrates. This product can be used as an initial cover coat over AAC without the need to separately reinforce joints. A second coat using a decorative sand texture finish is then applied with a RSA protective coating.
RSA AAC Supa Flex
RSA AAC Supa Flex
has been developed
for use with light weight
cementitious substrates
and is ideal for both
interior and exterior use.
CEMENT RENDERS
RSA AAC Supa Flex
Download TDS
click for product
page
Page 7
RSA Set & Prep is is a versatile
product formulated for the
installation of PVC beads as
well providing a ‘key coat’ for
difficult substrates.
This product can also be used
as a jointing compound over
fibre cement sheeting when
used in conjunction with RSA
acrylic textures.
Features and Benefits
• Specially formulated and rigorously tested for adhesion of PVC beads and trims to all building substrates that are suitable for rendering
• An essential component for many RSA coating systems to ensure ongoing performance
• An excellent ‘key’ for PVC and subsequent render coats
• Ideal scratch coat over painted acrylic based surfaces
• A multi-purpose preparation product ideal for difficult substrates which speeds up application
• Pre-mixed – simply add water
Suitable Substrates
When applied in accordance with the most recent application instructions, RSA Set & Prep is suitable for use over correctly prepared substrates including:
• Polystyrene and AAC Hebel substrates (for bead and trim installations only)
• Fibre cement sheeting (for bead and trim installations and joint patching)
• Off-form concrete and concrete tilt panels
• Clay bricks
• Concrete blocks
• Sound, previously painted, acrylic based surfaces
RSA Set & Prep
RSA Set & Prep is a
multipurpose polymer
modified cement based
building adhesive for
the installation of RSA
approved render beads
and trims.
CEMENT RENDERS
RSA Set & Prep
Download TDS
Download SDS
click for product
page
Page 8
Manufactured by the makers
of RSA, CCS BondKey is a
pre-mixed slurry bond coat,
formulated from polymer
additives, specialised cements
and various graded sands and
aggregates.
CCS BondKey is specifically
designed to ensure a superior
bond when applying cement
based renders to a variety
of substrates.
Features and Benefits
• Excellent adhesion to concrete, marble plaster, AAC and other cementitious substrates
• Contains a unique blend of fine sands and larger aggregates for high structural strength and a superior mechanical key
• Specialised polymer content to enhance chemical bonding, flexibility, density and structural strength
• Environmentally friendly
• Pre-mixed – simply add water
Suitable Substrates
CCS BondKey is suitable for use over correctly prepared substrates including:
• Clay Bricks
• Off-form Concrete
• Concrete Blocks
• Concrete Slab Edges
CCS BondKey
CCS BondKey
contains unique polymer
additives, specialised
cements and graded
aggregates to create
a superior, slurry bond
coat for cement-based
render applications.
CEMENT RENDERS
CCS BondKey
Download TDS
click for product
page
Page 9
RSA Flexible Mineral Texture
is a final coating texture
finish in a bag developed
for application by hand.
Suitable for use over a
range of substrates, it has
the flexibility to handle the
increased movement of
polystyrene and
fibre cement substrates.
Suitable for interior and
exterior use, RSA Flexible
Mineral Texture has an
extended ‘hang time’ for
greater productivity, high
early hardness, excellent
‘come back’ qualities for
quicker, easier floating.
Features and Benefits
• Fibre reinforced for excellent crack control
• Pre-mixed – simply add water
• Excellent flexibility and adhesion due to high polymer modification
• Improved formula for easier floating and finishing
• Efficient initial set time which can be brought back
• Tough, durable, scratch resistant surface, does not need priming prior to painting.
• A convenient and cost-effective final coating texture finish in a bag
• No VOC
Suitable Substrates
RSA Flexible Mineral Texture is suitable for use over a range of properly prepared substrates including;
• Polystyrene building substrates
• AAC - as a final coating over AAC Supaflex
• Concrete blocks
• Concrete slab edges
• Off form concrete
• Concrete tilt panels
• Cement Render
• Fibre Cement Sheeting
• Blue Board
• Sound previously painted (acrylic) surfaces.
RSA Flexible Mineral Texture
RSA Flexible Mineral
Texture is a premium,
polymer modified,
cement-based texture
finish in a bag with fibre
reinforcement for superior
crack control.
TEXTURES
RSA Flexible Mineral Texture
Download TDS
Download SDS
click for product
page
Page 10
RSA Polysand 800 is highly
flexible, high adhesion acrylic
texture coating that can be
tinted to acheive a finished
product that does not require
painting.
RSA Polysand 800 is available
in Light Base (LB), Mid Base
(MB) & Ultra Deep Base (UDB).
Features and Benefits
• Excellent adhesion to all properly prepared substrates
• Easy to apply non ‘tacky’ formulation.
• Superior flexibility, overcoming shrinkage and minor cracking associated with cement renders
• Long lasting, high integrity finish suitable for both interior and exterior use
• Formula incorporates a graded stone size that provides an excellent guide for even application
• An exteremely durable semi-smooth finish that is easy to maintain
• Suitable for tinting as a finished colour or can be painted over with RSA Rapid Shield Matt
Suitable Substrates
When applied in accordance with the most recent application instructions, RSA Polysand 800 is suitable for use over correctly prepared substrates including:
• Acrylic and cement based renders
• Slab edge, off-form and tilt panel concrete
• Painted surfaces
• Gyprock plasterboard
• Fibre cement sheeting
RSA Polysand 800 Range (LB, MB & UDB)
RSA Polysand 800 is
an acrylic based, stone
enhanced product
designed for use over
RSA rendered substrates
including fibre cement
sheeting.
TEXTURES
RSA Polysand 800
Download TDS
Download SDS
click for product
page
Page 11
RSA Polysand Fine is an acrylic
based, stone enhanced texture
designed for use over RSA
rendered substrates.
RSA Polysand Fine can
be tinted to achieve a finished
product that does not
require painting.
RSA Polysand Fine is available
in Light Base (LB) only.
Features and Benefits
• Excellent adhesion
• Easy to apply – non ‘tacky’ formulation
• Plastic float finishing properties resulting in a sponged appearance
• Excellent flexibility, overcoming shrinkage and minor cracking associated with cement renders
• Long lasting high integrity finish suitable for both interior and exterior use
• Includes a stone size which acts as an excellent guide for even application
• Fine sand grain finish that offers both easy maintenance and high durability
• Suitable for tinting as a finished colour or can be painted over with RSA Rapid Shield Matt
Suitable Substrates
When applied in accordance with the most recent application instructions, RSA Polysand Fine is suitable for use over correctly prepared substrates including:
• Acrylic and cement based renders
• Slab edge, off-form and tilt panel concrete
• Painted surfaces
• Gyprock plasterboard
• Fibre cement sheeting
RSA Polysand Fine (LB)
RSA Polysand Fine is
an acrylic based, stone
enhanced product
designed for use over
RSA rendered substrates
including fibre cement
sheeting.
TEXTURES
RSA Polysand Fine
Download TDS
Download SDS
click for product
page
Page 12
RSA Bling Coarse is a unique
acrylic texture coating that
contains natural quartz flecks
that create an attractive
shimmer and sparkle when
exposed to light.
RSA Bling Coarse comprises
high quality washed and
graded aggregates, polymers,
acrylic binders, as well as water
resisting and hydrophobic
agents.
RSA Bling Coarse is available in
Light Base (LB), Mid Base (MB)
and Ultra Deep Base (UDB).
Features and Benefits
• Excellent water resistance – no need for paint
• A shimmering sparkle effect when exposed to light
• Available in a wide range of bases for tinting requirements
• Highly flexible decorative top coat
• Outstanding wet edge properties that assist the plasterer to achieve a seamless finish
• Excellent depth and coverage due to natural stone size
• Attractive finish making it ideal for any broad wall or feature area
Suitable Substrates
When applied in accordance with the most recent application instructions, RSA Bling Coarse is suitable for use over correctly prepared substrates including:
• Acrylic and cement based renders
• Slab edge, off-form and tilt panel concrete
• Painted surfaces
• Gyprock plasterboard
• Fibre cement sheeting
RSA Bling Coarse
RSA Bling Coarse is
a unique acrylic texture
with a quartz shimmer
that does not require
over-coating with paint.
TEXTURES
RSA Bling Coarse
Download TDS
Download SDS
click for product
page
Page 13
RSA Trowel On 2mm is an
extremely durable travertine
and random swirl scratch
coat finish.
Its superior adhesion and
extended ‘hang time’ allows
plasterers time to develop a
seamless decorative finish
ideal for both interior and
exterior use.
Features and Benefits
• Excellent adhesion to all correctly prepared substrates
• Easy to apply, non-tacky formulation
• Tough, knock resistant surface perfect for over coating with RSA Rapid Shield Matt
• Superior flexibility, overcoming shrinkage and minor cracking (commonly associated with cement based renders)
• Durable, high integrity finish for both interiors and exteriors
• Travertine or vertical pattern can disguise surface irregularities that are often associated with FC/blue board substrates
• Extended ‘hang time’ allowing time to develop a seamless finish
• Can be used as a single coat application over sealed fibre cement sheeting
Suitable Substrates
When applied in accordance with the most recent application instructions, RSA Trowel On 2mm is suitable for use over correctly prepared substrates including:
• Acrylic and cement based renders
• Rendered bricks, blocks, Hebel, FC sheeting and polystyrene paneling and blocks
• Slab edge, off-form and tilt panel concrete
• Painted acrylic based surfaces
• Primed plasterboard
RSA Trowel On 2mm
RSA Trowel On 2mm
is an acrylic based,
stone enhanced product
which provides a vertical
travertine or random
swirl scratch coat finish.
TEXTURES
RSA Trowel On 2mm
Download TDS
Download SDS
click for product
page
Page 14
RSA Flexirender is ideal for use
over a wide range of substrates
including FC sheeting and
previously painted surfaces.
RSA Flexirender is a highly
flexible base coat system that
results in a flatter, higher
quality finish.
Features and Benefits
• Flexibile, overcoming shrinkage and minor cracking associated with cement renders
• Provides an extended ‘hang time’ allowing the plasterer to achieve a seamless finish
• Optional single coat finish (up to 2.5mm) over FC sheeting
• Offers excellent adhesion to all properly prepared substrates
• Results in a flatter, higher quality finish
Suitable Substrates
When applied in accordance with the most recent application instructions, |RSA Flexirender is suitable for use over correctly prepared substrates including:
• Acrylic and cement based renders (as a finishing coat)
• Fibre cement sheeting and Gyprock plasterboard
• Slab edge, off-form and tilt panel concrete
• Stable painted surfaces
• Clay cricks and concrete blocks
• AAC Hebel
RSA Flexirender (untinted)
RSA Flexirender is
a high quality acrylic
based sand enhanced
product ideal for FC
sheeting, previously
painted surfaces and
other correctly prepared
surfaces.
TEXTURES
RSA Flexirender
Download TDS
Download SDS
click for product
page
Page 15
RSA Rapid Shield Matt is
a high performance, 100%
acrylic, tintable protective
exterior coating ideal for
coating over both
RSA Masonry Renders, acrylic
textures and other substrates.
It assists in masking
irregularities in finished textures
and is ‘self priming’ for
greater efficiency.
RSA Rapid Shield Matt is
available in Light Base (LB),
Mid Base (MB) and Ultra Deep
Base (UDB).
Features and Benefits
• Provides excellent adhesion to all properly prepared substrates
• Excellent flow and leveling
• Self priming
• Resists mould and bacteria
• May be used as a high opacity stand alone coating
Suitable Substrates
When applied in accordance with the most recent applicationinstructions, RSA Rapid Shield Matt is suitable for use over correctly prepared substrates including:
• Acrylic and cement based renders
• Slab edge, off-form and tilt panel concrete
• Previously painted surfaces
• Gyprock plasterboard
• Soffits and timber trims
• PVC Downpipes
RSA Rapid Shield Matt (LB, MB & UDB)
RSA Rapid Shield Matt
is a high performance,
tintable pure acrylic
exterior protective
coating that is suitable
for both RSA Masonry
Renders and Acrylic
Textures.
PROTECTIVE COATINGS
RSA Rapid Shield Matt
Download TDS
Download SDS
click for product
page
Page 16
RSA Cleanskin is a water
based, clear acrylic resin
designed to be used as a final
protective coating over tinted
RSA texture systems.
This tough, durable and
weather resistant clear coating
ensures tinted surfaces
avoid moisture staining and
deterioration over time.
Features and Benefits
• Increases moisture resistance properties as part of a full acrylic system
• Enhances and effectively assists with sealing RSA Bling and tinted Polysand 800 texture systems
• Micro crack and alkali resistant
• Excellent adhesion to all properly prepared substrates
• Superior flow, leveling and wet edge properties
• Tough, durable, easy to clean, weather resistant protective coating that has excellent abrasion resistance
• Essential final coat protection for tinted textures and coatings
Suitable Substrates
When applied in accordance with the most recent application instructions, RSA Cleanskin can be used over tinted RSA texture systems applied onto the following substrates:
• Fibre cement sheeting
• EP rendered expanded polystyrene systems
• AAC Hebel
• Tilt panel concrete
• Correctly rendered masonry
RSA Cleanskin
RSA Cleanskin is
a water based, clear
acrylic resin that offers
long lasting protection
when applied over a
range of tinted RSA
render textures.
PROTECTIVE COATINGS
RSA Cleanskin
Download TDS
Download SDS
click for product
page
Page 17
Guide to RSA Primers, Sealers and Patches
Product Features Uses and suitable surfaces
Render Bond ✓ Significantly increases the adhesion of render mixes
✓ Excellent primer and key coat capabilities
Commonly used to prime porous bricks, blocks and AAC
Hebel prior to the application of render coats. (50/50 mix)
• Added to render mixes where greater adhesive strength
is required.
• Can be mixed and applied as a primer or key coat
or as a slurry coat with RSA Set and Prep, for use
over concrete and low suction substrates prior to the
application of RSA renders and/or textures.
Multiprime Multi-purpose product – can be used as a primer, sealer or undercoat
✓ Effectively seals walls and reduces substrate suction. (Dilute 4:1)
✓ Tintable (WB and UDB)
✓ Increases the performance and integrity of subsequent acrylic products
and systems
N.B. Does not contain ‘grit’. Use RSA Multiprime if the application
requires a grit enhanced primer.
• Acrylic and cement based renders
• FC sheeting
• Gyprock’ plasterboard
• Clay brick
• Concrete block
• Off-form concrete
QT Lite Base ✓ Tintable to a light base colour
✓ Water resistant once cured
✓ Good vapour permeability
✓ Excellent flexibility and crack resistance
✓ Excellent durability
✓ Strong adhesion to properly prepared surfaces
✓ Easy to apply and does not usually require floating
✓ Water based
✓ Easy and safe clean up
• AAC Panels & Blocks
• F.C. Sheeting (Blue Board)
• Insitu formwork, AFS & Ritek
Patch Fine* ✓ Effectively fills defects in concrete and masonry surfaces
✓ Can be applied up to 4mm in a single application
✓ Easily sanded
✓ Provides an excellent base coat to create a smooth, uniform foundation
in preparation for priming and protective coatings.
✓ Can be ‘polished’ as an internal finish.
✓ Can be used to overcoat RSA Patch Coarse and Patch Fine
applications to produce a more suitable smooth finish.
• Specifically designed as a filler to complement RSA
Protective Coatings
• Filling defects in concrete and masonry substrates
• Multiple coats may be applied for rectification of severe
defects.
Patch Smooth* ✓ Effectively fills defects in concrete and masonry surfaces
✓ Can be applied up to 4mm in a single application
✓ Easily sanded
✓ Provides an excellent base coat to create a smooth, uniform foundation
in preparation for priming and protective coatings.
✓ Can be ‘polished’ as an internal finish.
✓ Can be used to overcoat RSA Patch Coarse and Patch Fine
applications to produce a more suitable smooth finish.
• Specifically designed as a filler to complement RSA
Protective Coatings
• Filling defects in concrete and masonry substrates
• Multiple coats may be applied for rectification of severe
defects.
Patch Coarse* ✓ Easy to apply
✓ Sand enhanced
✓ Effectively fills larger deviations and joint setting
✓ Can be feathered out
✓ Non suitable for sanding. Can be over-coated with Patch Smooth
or Patch Fine should sanding be required and/or a smoother finish
desired.
• An alternative to RSA Set and Prep for patching joints
with reinforcing mesh over F.C. Sheeting and in-situ
formwork (particularly where a low build acrylic is to be
applied as a finish).
• Can be used to patch minor irregularities in concrete
surfaces and feathered out.
*All patches require the addition of 10% cement
PRIMERS, SEALERS & PATCHES
Download TDS
Download TDS
Download TDS
Download TDS
Download TDS
Download TDS
Download SDS
Download SDS
Download SDS
Download SDS
Download SDS
Download SDS
click for product
page
Manufactured under a Quality Management System certified to ISO 9001:2015
Render Systems Australia is a division of River Sands Pty LtdCorner Riverland and Monte-Khoury Drive, Loganholme, Qld 4129 | 1800 077 744 | 07 3412 8111 Service CentresGeebung 07 3865 6888 | Gold Coast 07 5597 0423 www.rendersystemsaustralia.com.au | riversands.com.au RS
A-10
1909
V1
Filtration media and sands Specialised products for civil and mining applications
Coloured pigments and coatings for concrete
Pool renders and finishes Prebagged concrete, sand and gravel