exhaust fan timer 2 - jackson wws · 2018. 10. 2. · this will program the timer to run the fan...
TRANSCRIPT
-
1. Using a flathead screwdriver, turn the blue knob until the arrow points at the “3” line.
This will program the timer to run the fan for 2 1/2 to 3 minutes.
2. If this is not suitable, turn the blue knob until the arrow points at the desired time.
The blue knob can be set from 0 to 10, with each increment corresponding to 1 minute.
EXHAUST FAN TIMER 2
HT-180 SERIES
1 of 1
These instructions are for Exhaust Fan Timer 2 (05945-004-34-92). If your machine doesn’t have this timer, click the instruction icon for the other timer depicted in the Exhaust Fan Timer section of the manual.
NOTICE
PROGRAMMING
Gray
Yellow
Red
Red/Yellow Yellow/Black