Exercise Lecture 7Completing Exercise - Lecture 6

1.Create Your Own Blocks2.Insert Blocks to Your New Drawing3.Using Different Hatching Types

Create new drawing named (My Blocks), Change drawing units to be metric, Draw door & window and create door and window blocks, Open Design Center and go to Home Designer then create tool

palette Insert the following blocks from these palettes.

Create Your Own Blocks

Insert Blocks to Your New Drawing

Open your previous (Ground Floor Plan) drawing,

Insert doors and windows blocks from (My Blocks) Drawing,

Align them in their suitable places,

Insert bathroom blocks as shown in the following drawing,

Using Different Hatching Types

Create new layer (Hatch), Use suitable hatching types for

Bath and Balcony spaces as shown in the following drawing.