An italian tile made in USA An italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USAin USA An italian tile made in USA

EVOLUTION

EVOLUTIONAn italian tile made in the USA

4 5

WWhite 12”x24” Semi-Polished

5

6 7White Semi-Polished 6”x36” - Rectangular Mosaic

6 7

8 98 9

White Semi-Polished 12”x24”

10 11

Light Gray18”x36” - 6”x36”

L11

12 13Light Gray 6”x36” - Bullnose

12 13

14 1514 15

Light Gray Semi-Polished 6”x36”

16 1717

AAvio12”x24”

18 19Avio 12”x24” - 18”x36” FLOOR - WHITE HEXAGON MOSAIC

18 19Avio 18”x36”

20 2121

Dark Gray18”x36”

D

22 2322 23

Dark Gray Semi-Polished 12”x24” - Rectangular Mosaic

24 25

26

__––__––----

EVOLUTION

Colors shown may vary from actual product.Final selection should be made from actual product samples.

COLOR BODY PORCELAIN - Rectified

ALL FLORIM USA PRODUCTS MEET OR EXCEED ALL STANDARDS IN ANSI

MATTE - SEMI-POLISHED

* WEIGHT PER PALLET DOES NOT INCLUDE PALLET WEIGHT ITSELF ALL OTHER SIZES WILL BE PACKAGED AS ORDERED. PLEASE CONTACT FLORIM CUSTOMER SERVICE AT 877-FLORIM1 FOR PACKAGING INFORMATION.

MINIMUM GROUT SIZE RECOMMENDED = 5 MM (OR APPROX. 3/16”) IF STAGGERED TILE PLACEMENT, WE RECOMMEND USING A 30% OFFSET. IF SPECIFIED BRICK PAT TERN WITH 1/2 PAT TERN MANDATORY, A BIGGER GROUT IS RECOMMENDED TO HIDE IMPERFEC TIONS OF INSTALLATION (MINIMUM 1/4”).

• DUE TO THE INHERENT NATURE OF FIRED PORCELAIN TILE, IT IS IMPORTANT TO NOTE THAT T H E CO E F F I C E N T O F F R I C T I O N MAY VARY WITHIN AND BETWEEN PRODUCT RUNS.

40% RECYCLED CONTENT(DARK GREY)

12”x24” Rectified

6”x36” Rectified

18”x36” Rectified

12”x24” Rectified Semi-polished

6”x36” Rectified Semi-polished

18”x36” Rectified Semi-polished

1100076 White1100077 Avio1100078 Light Gray 1100079 Dark Gray

1100081 White1100082 Avio1100083 Light Gray 1100084 Dark Gray

1100071 White1100072 Avio1100073 Light Gray 1100074 Dark Gray

1100086 White1100087 Avio1100088 Light Gray 1100089 Dark Gray

1100091 White1100092 Avio1100093 Light Gray 1100094 Dark Gray

1100096 White1100097 Avio1100098 Light Gray 1100099 Dark Gray

Rectangular Mosaic 12”x12”

4”x24” Bullnose

Hexagon Mosaic semi-polished

4”x24” Bullnose semi-polished

1100101 White1100102 Avio1100103 Light Gray 1100104 Dark Gray

1100106 White1100107 Avio1100108 Light Gray 1100109 Dark Gray

1100111 White1100112 Avio1100113 Light Gray 1100114 Dark Gray

1100116 White1100117 Avio1100118 Light Gray 1100119 Dark Gray

1100121 White1100122 Avio1100123 Light Gray 1100124 Dark Gray

6”X12” Cove Base

1100126 White1100127 Avio1100128 Light Gray 1100129 Dark Gray

Hexagon Mosaic

PACKAGINGSIZES

METRIC(CM)

THICKNESS(MM)

PIECES PER BOX

SQ. FT PER BOX

WEIGHT PER BOX

BOXES PERPALLET

WEIGHT PER PALLET*

FIELD TILES

12"x24" natural 30x60 10 mm 6 12 54 48 2,592

12"x24" semi-polished 30x60 10 mm 6 12 54 48 2,592

6"x36" natural 15x90 10 mm 8 12 52.8 44 2,323

6"x36" semi-polished 15x90 10 mm 8 12 52.8 44 2,323

18"x36" natural 45x90 10 mm 3 13.5 58 27 1,567

18"x36" semi-polished 45x90 10 mm 3 13.5 58 27 1,567MOSAICS AND COORDINATING TRIMS

12"x12" hex mosaic natural 30x30 10 mm 10 10 34 45 1,530

12”x12” hex mosaic semi-polished 30x30 10 mm 10 10 34 45 1,530

12”x12” rectangular mosaic 30x30 10 mm 10 10 40 45 1,800

4”x24” bullnose natural 10x60 10 mm 12 8 33.6 48 1,613

4”x24” bullnose semi-polished 10x60 10 mm 12 8 33.6 48 1,613

6"x12" Cove Base natural 15x60 7 mm 10 5 15 64 960

Surface Abrasion PEI IV-V ASTM C1027

Water Absorption ≤0.5% MEETS REQUIREMENT ASTM C373

Chemical Resistance AS REPORTED NOT AFFECTED ASTM 650

Dynamic Coefficient of Friction ≥ 0.42 • WET MEETS REQUIREMENT ANSI 137.1

Stain Resistance AS REPORTED NOT AFFECTED ASTM C1378

Breaking Strength AS REPORTED ≥ 400 ASTM C648

Resistance to Freeze AS REPORTED RESISTANT ASTM C1026

TECHNICAL SPECIFICATIONS

REFERENCE VALUE DECLARED VALUE TEST METHOD

28 29

WHY PORCELAIN?There are many reasons to choose impervious porcelain tile over other floor coverings. It offers the largest array of design options and holds its value the longest. In a comparison between the many different flooring options, porcelain tile offers one of the most durable and least expensive options over the lifespan of the building.

Benefits of Porcelain Tile• Impervious to water• Easy to maintain• Variety of design options• Environmentally friendly• Resistant to germs and bacteria• Fade resistant• Fire resistant• Durable - best long-term value vs.other floor coverings

PROGRESS THAT TOUCHES AND INVESTS IN THE ENTIRE SOCIETYAs a active member of the U.S Green Building Council, Florim spreads awareness to the entire American communities and encourages towards the use of building solutions inspired by environmentally friendly practices. Using Florim products for project implementation, will positively contribute in obtaining scores and points required for earning the LEED certification(Leadership in Energy and Environmental Design).

A COMMITMENT TO THE DEVELOPMENT OF PRODUCTS FOR A CONSCIOUS BUILDING TRADEFlorim offers products containing recycled material. The adoption of eco-compatible production systems is merit of Italian designs produced in the U.S.

TECHNICAL DEVELOPMENT THAT CONSIDERS THE NATURAL ENVIRONMENTFlorim commits to the eco-compatible project and translates the same into an avant-guard production process, minimizing the negative impact on the environment.

CONTRIBUTES TO LEED CREDITS

Routine care instructions: 1. Wash with water to remove superficial dirt. 2. Application of Fila Cleaner® Fila (commercial product) diluted to an average of 1:200 to the surface. 3. Let the solution sit 5-7 minutes.4. Remove the cleaner with a vigorous mechanical cleaning action using common hand cleaningequipment, or a suitable floor-cleaning appliance.5. Dry the floor completely.

Note: For desired results, it is particularly important to combine the effect of the detergent with a vigorous mechanical cleaning action. The products mentioned in these instructions do not officiate any official agreements with any floor cleaning product producers.

CLEANING & MAINTENACE

V1The least amount of shade and texture varition. Attainable in naturally fired clay products.

V2Light to moderate shade and texture variation within each carton.

V3High shade texture variation within each carton.

V4Very high shade and texture variation within each carton.

COLOR SHADE VARIATIONEach FLORIM product is characterized by a degree of color shading that varies from product to product, from color to color. Color shading means chromatic variation from tile to tile in every box. It is not possible to request FLORIM in color shade variations other than those shown per item.

An italian tile made in USA An italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USA An Italian tile made in the USAin USA An italian tile made in USA

300 International Blvd. Clarksville, TN 37040Toll free: 877 - Florim1 (356-7461)phone. 931 645 5100www.florimusa.com #8

7002

67