european technical eta -12/0208 assessment of 5 ......page 12 of european technical assessment eta...
TRANSCRIPT
Z57909.17 8.06.04-389/17
European Technical
Assessment
ETA-12/0208
of 5 December 2017 English translation prepared by DIBt - Original version in German language General Part
Technical Assessment Body issuing the European Technical Assessment:
Deutsches Institut für Bautechnik
Trade name of the construction product termoz SV II ecotwist
Product family to which the construction product belongs
Screwed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry
Manufacturer fischerwerke GmbH & Co. KG Klaus-Fischer-Straße 1 72178 Waldachtal DEUTSCHLAND
Manufacturing plant fischerwerke
This European Technical Assessment contains
12 pages including 3 annexes which form an integral part of this assessment
This European Technical Assessment is issued in accordance with Regulation (EU) No 305/2011, on the basis of
EAD 330196-01-0604
This version replaces ETA-12/0208 issued on 26 May 2017
elec
troni
c co
py o
f the
eta
by
dibt
: et
a-12
/020
8
European Technical Assessment
ETA-12/0208
English translation prepared by DIBt
Page 2 of 12 | 5 December 2017
Z57909.17 8.06.04-389/17
The European Technical Assessment is issued by the Technical Assessment Body in its official language. Translations of this European Technical Assessment in other languages shall fully correspond to the original issued document and shall be identified as such.
Communication of this European Technical Assessment, including transmission by electronic means, shall be in full. However, partial reproduction may only be made with the written consent of the issuing Technical Assessment Body. Any partial reproduction shall be identified as such.
This European Technical Assessment may be withdrawn by the issuing Technical Assessment Body, in particular pursuant to information by the Commission in accordance with Article 25(3) of Regulation (EU) No 305/2011.
elec
troni
c co
py o
f the
eta
by
dibt
: et
a-12
/020
8
European Technical Assessment
ETA-12/0208
English translation prepared by DIBt
Page 3 of 12 | 5 December 2017
Z57909.17 8.06.04-389/17
Specific Part
1 Technical description of the product
The fischer termoz SV II ecotwist screwed-in anchor consist of an anchor sleeve and a screw plate in different colours, both made of polyamide (virgin material) and an accompanying specific screw of galvanised steel.
The product description is given in Annex A.
2 Specification of the intended use in accordance with the applicable European Assessment Document
The performances given in Section 3 are only valid if the anchor is used in compliance with the specifications and conditions given in Annex B.
The verification and assessment methods on which this European Technical Assessment is based lead to the assumption of a working life of the anchor of at least 25 years. The indications given on the working life cannot be interpreted as a guarantee given by the producer, but are to be regarded only as a means for choosing the right products in relation to the expected economically reasonable working life of the works.
3 Performance of the product and references to the methods used for its assessment
3.1 Mechanical resistance and stability (BWR 1)
Essential characteristic Performance
Characteristic tension resistance See Annex C1
Edge distances and spacing See Annex B2
Displacements See Annex C2
3.2 Energy economy and heat retention (BWR 6)
Essential characteristic Performance
Point thermal transmittance See Annex C2
4 Assessment and verification of constancy of performance (AVCP) system applied, with reference to its legal base
In accordance with EAD No. 330335-00-0604, the applicable European legal act is: [97/463/EC].
The system to be applied is: 2+
elec
troni
c co
py o
f the
eta
by
dibt
: et
a-12
/020
8
European Technical Assessment
ETA-12/0208
English translation prepared by DIBt
Page 4 of 12 | 5 December 2017
Z57909.17 8.06.04-389/17
5 Technical details necessary for the implementation of the AVCP system, as provided in the applicable European Assessment Document
Technical details necessary for the implementation of the AVCP system are laid down in the control plan deposited at Deutsches Institut für Bautechnik.
Issued in Berlin on 5 December 2017 by Deutschen Institut für Bautechnik
BD Dipl.-Ing. Andreas Kummerow beglaubigt:
Head of Department Aksünger
elec
troni
c co
py o
f the
eta
by
dibt
: et
a-12
/020
8
Page 5 of European Technical Assessment ETA-12/0208 of 5 December 2017 English translation prepared by DIBt
Z57878.17 8.06.04-389/17
elec
troni
c co
py o
f the
eta
by
dibt
: et
a-12
/020
8
Page 6 of European Technical Assessment ETA-12/0208 of 5 December 2017 English translation prepared by DIBt
Z57878.17 8.06.04-389/17
elec
troni
c co
py o
f the
eta
by
dibt
: et
a-12
/020
8
Page 7 of European Technical Assessment ETA-12/0208 of 5 December 2017 English translation prepared by DIBt
Z57878.17 8.06.04-389/17
elec
troni
c co
py o
f the
eta
by
dibt
: et
a-12
/020
8
Page 8 of European Technical Assessment ETA-12/0208 of 5 December 2017 English translation prepared by DIBt
Z57878.17 8.06.04-389/17
elec
troni
c co
py o
f the
eta
by
dibt
: et
a-12
/020
8
Page 9 of European Technical Assessment ETA-12/0208 of 5 December 2017 English translation prepared by DIBt
Z57878.17 8.06.04-389/17
elec
troni
c co
py o
f the
eta
by
dibt
: et
a-12
/020
8
Page 10 of European Technical Assessment ETA-12/0208 of 5 December 2017 English translation prepared by DIBt
Z57878.17 8.06.04-389/17
elec
troni
c co
py o
f the
eta
by
dibt
: et
a-12
/020
8
Page 11 of European Technical Assessment ETA-12/0208 of 5 December 2017 English translation prepared by DIBt
Z57878.17 8.06.04-389/17
elec
troni
c co
py o
f the
eta
by
dibt
: et
a-12
/020
8
Page 12 of European Technical Assessment ETA-12/0208 of 5 December 2017 English translation prepared by DIBt
Z57878.17 8.06.04-389/17
elec
troni
c co
py o
f the
eta
by
dibt
: et
a-12
/020
8