eurogel gcp / gctc 500 series iso-modified - euromere · eurogel gcp / gctc 500 series iso-modified...
TRANSCRIPT
Eurogel GCP / GCTC 500 Series Iso-modified
Applications : Industrial, Transportation, Building, General purpose. Standard quality gelcoat, with stable storage and application properties.Good protection for polyester laminates under outdoor conditions. Answer all demanding process requirements.
Reference Application In m
old
Topc
oat
Visc
osity
/ po
ises
Thix
. Ind
ex
Gel
tim
e / m
in (o
n 20
0gr m
ass,
at
20°
C, 1
% M
EKP
50)
Den
sity
Eurogel GCP-512 Spray • 120-170 ≥ 4 10-20 1,25
Eurogel GCP-522 Brush • 400-450 ≥ 4 10-20 1,25
Eurogel GCP-512 AD (auto-démoulant) Spray • 90-150 ≥ 4 10-20 1,25
Eurogel GCTC-512 Spray • 120-170 ≥ 4 10-20 1,25
Eurogel GCTC-511 Spray • 120-170 ≥ 4 25-30 1,25
Eurogel GCTC-522 Brush • 400-450 ≥ 4 10-20 1,25
Eurogel GCTC-521 Brush • 400-450 ≥ 4 25-30 1,25
For further information please refer to Products & Applications pages: euromere.com
Eurogel GCP / GCTC 600 Series 100% isophtalic
Applications : Marine, Sanitary and Kitchen wares, Industrial, Transortation, Building.Special formulation to answer the most demanding outdoor end product requirements. High properties of hydrolysis resistance.
Reference Application In m
old
Topc
oat
Visc
osity
/ po
ises
Thix
. Ind
ex
Den
sity
Tens
ile s
tren
gth
Mpa
Tens
ile m
odul
us
MPa
Flex
ural
str
engt
h M
pa
Flex
ural
mod
ulus
M
Pa
Elon
gatio
n at
bre
ak
% HD
T / °
C
Eurogel GCP-612 Spray • 120-170 ≥ 5 15-20 1,1 80 3300 130 3400 4 90
Eurogel GCP-611 Spray • 120-170 ≥ 5 25-30 1,1 80 3300 130 3400 4 90
Eurogel GCP-622 Brush • 400-450 ≥ 5 15-20 1,1 80 3300 130 3400 4 90
Eurogel GCP-621 Brush • 400-450 ≥ 5 25-30 1,1 80 3300 130 3400 4 90
Eurogel GCTC-612 Spray • 120-170 ≥ 5 15-20 1,1 80 3300 130 3400 4 90
Eurogel GCTC-611 Spray • 120-170 ≥ 5 25-30 1,1 80 3300 130 3400 4 90
Eurogel GCTC-622 Brush • 400-450 ≥ 5 15-20 1,1 80 3300 130 3400 4 90
Eurogel GCTC-621 Brush • 400-450 ≥ 5 25-30 1,1 80 3300 130 3400 4 90
For further information please refer to Products & Applications pages: euromere.com
Cured base resin properties
Gel
tim
e / m
in (o
n 20
0gr
mas
s, a
t 20°
C, 1
% M
EKP
50)
Eurogel HQ-212 / HQ-212 TC Series Iso-NPG
Applications : Marine, Swimming-pool, Spa, Industrial, Transportation, Building.Very high resistance to hydrolysis, UV radiations, and in marine environment.
Reference Application In m
old
Topc
oat
Visc
osity
/ po
ises
Thix
. Ind
ex
Den
sity
(± 0
,5)
Eurogel HQ-212 Spray • 120-180 ≥ 5 20-30 1,3
Eurogel HQ-211 Spray • 120-180 ≥ 5 35-45 1,3
Eurogel HQ-222 Brush • 350-500 ≥ 5 20-30 1,3
Eurogel HQ-221 Brush • 350-500 ≥ 5 35-45 1,3
Eurogel HQ-212 TC Spray • 120-180 ≥ 5 20-30 1,3
Eurogel HQ-211 TC Spray • 120-180 ≥ 5 35-45 1,3
Eurogel HQ-222 TC Brush • 350-500 ≥ 5 20-30 1,3
Eurogel HQ-221 TC Brush • 350-500 ≥ 5 35-45 1,3
For further information please refer to Products & Applications pages: euromere.com
Gel
tim
e / m
in (o
n 20
0gr m
ass,
at
20°C
, 1%
MEK
P 50
)
Eurogel GCP 800 Series 100% vinylester
Applications : Moulds, tanks Good resistance to temperature and chemical products. High gloss and hardness.Standard colours : green, black, transparent.
Reference Application In m
old
Topc
oat
Visc
osity
/ po
ises
Thix
. Ind
ex
Den
sity
(± 0
,5)
Tens
ile s
tren
gth
Mpa
Tens
ile m
odul
us M
Pa
Flex
ural
str
engt
h M
pa
Flex
ural
mod
ulus
MPa
Elon
gatio
n at
bre
ak %
HD
T / °
C
Eurogel GCP-812 Spray • 120-170 ≥ 5 10-15 1,1 72 3600 130 3700 2 135
Eurogel GCP-811 Spray • 120-170 ≥ 5 15-30 1,1 72 3600 130 3700 2 135
For further information please refer to Products & Applications pages: euromere.com
Cured base resin properties
Gel
tim
e / m
in (o
n 20
0gr m
ass,
at
20°C
, 1%
LPT
)
Eurogel - Specific TopcoatsAnswer specific Top Coating requirementsApplications : Marine, Transportation, Building, Wind-, Tank- and Other industries…(Refer to Eurogel 500, 600, HQ and 800 for our standard topcoats)
Reference Application Mol
d
Topc
oat
Visc
osity
/ po
ises
Thix
. Ind
ex
Den
sity
(± 0
,5)
Comments
Eurogel GCTC-312 Brush/Roller • 230-280 ≥ 513-20
(2% PMEC50, at 20°C on 200gr)
1,2
Very High surface tension. Satin/Gloss surface finish. High covering power.Possible to apply with one coat only according to support surface quality. Also possible to apply with 2 coats without sanding between layers.
Eurogel GCTC-313 Brush/Roller • 230-280 ≥ 58-15
(2% PMEC50at 20°C on 200gr)
1,2 Higher reactivtiy version of GCTC-312.
Eurogel GCTC-1201 Brush/Roller • 170-250 2,5-435-45
(1% PMEC50,at 20°C on 200gr)
1,5Higher covering power. Possible to apply with only one coat. Satin/Gloss surface finish. Air release additive included. High cost/performance ratio.
Eurogel LP-TC 1201 Brush/Roller • 170-250 3-550-70
(2% PMEC50,at 23°C, on 100gr)
1,35Long gel time, higher thix index, superior covering power. Only one coat possible. Satin/Gloss surface finish. Air release additive included. High cost/performance ratio.
Eurogel GCTC-10089 Brush/Roller • 300-500 4-610-15
(2% PMEC50,at 23°C on 200gr)
1,38 Top Coat with anti skid properties (sand) for truck flooring construction. High covering power and abrasion resistance.
For further information please refer to Products & Applications pages: euromere.com
Gel
time
/ min
(on
mas
s)
Eurogel - Products for repairs / High thixotropic paste
Applications : all industries- Marine, Sanitary, Swimming-Pool, Transportation, Building, Wind, Tank(For in mold repair application, refer to Eurogel 500, 600, HQ and 800 brush versions ranges )
Reference Application Mol
d
Topc
oat
Visc
osity
/ po
ises
Thix
. Ind
ex
Den
sity
(± 0
,5)
Comments
Eurogel GCRTC Brush/Spatula • 3000-6000 ≥ 7 15-20 1,1 High viscosity top coat. Fairing putty based on iso resin for finishing repair job. Good mechanical properties. High gloss.
Eurogel HQRTC Brush/Spatula • 5000-10000 >8 _ 1,3 High viscosity top Coat. Fairing putty based on isoNPG resin for finishing repair job. Good mechanical properties, high gloss.
Pâte FT-711 Incolore Brush/Spatula • 5000-10000 ≥ 7 30-60 1,1High thixotropic paste. Specially developped to increase polyester gel coat thixotropy for making it usable by hand application (eg. Joint plane). High water resistance and gloss and color retention.
For further information please refer to Products & Applications pages: euromere.com
Gel
time
/ min
(at 2
0°C
, on
200
gr m
ass,
1%
of P
MEC
50)
FSP-SC > Sprayable core material, thick and lightweight topcoat
Reference Application Visc
osity
/ po
ises
Thix
. Ind
ex
Den
sity
(± 0
,05)
Gel
tim
e / m
in (o
n 13
0gr m
ass,
at 2
0°C
, 2%
MEK
P 50
)
FSP-SC 1527 Spray 550-700 ≥ 5 0,7 15-20
FSP-TC 1560 Spray 500-650 3,5 0,7 15-25
For further information please refer to Products & Applications pages: euromere.com
Comments
Application in sandwich construction, to replace fiberglass, felt, foam, and other core materials. High mechanical properties, high rigidity, no water uptake. Significant time savings, no roll, application up to 5mm in vertical without sagging. Improved surface quality (low exotherm, low shrink, fiber-marking reduction) Low styrene content.
Application as a thick top coat, to fill the surface defects of laminates.Good surface tension.Can be laminated over without sanding.
Protective coat directly applied behind gelcoat, to replace the first layer of laminated skin coat generally done with Iso or VE resin + fiberglass.
Reference Application Iso-
Viny
lest
er b
ase
100%
vin
yles
ter b
ase
Visc
osity
/ po
ises
Thix
. Ind
ex
Gel
tim
e / m
in (o
n 13
0gr
mas
s, a
t 20°
C, 2
% M
EKP
50)
Tim
e be
fore
ove
r la
min
atio
n / m
in
Den
sity
(±0,
5)
Comments
FSP-BC 1701 T Spray • 180-220 ≥ 5 15-25 45 0,8 ± 0,05 High thixotropy
FSP-BC 1701 Spray • 80-100 ≥ 4 8-12 30 0,8 ± 0,05 Low viscosity, high reactivity
FSP-BC 1701/300 Brush • 280-320 ≥ 4 15-25 45 0,8 ± 0,05 High viscosity, for hand application
FSP-BC 1700 Spray • 80-100 ≥ 4 10-20 45 0,8 ± 0,05 Low viscosity, high reactivity
FSP-BC 1700 T Spray • 180-220 ≥ 5 10-15 45 0,8 ± 0,05 High thixotropy
FSP-BC 1101 Spray • 130-160 ≥ 5,5 10-15 45 1,15 ± 0,05 Special version for robot spraying.
For further information please refer to Products & Applications pages: euromere.com
Bonding pastes, Putties, anti-bubble/radius compounds, cavity fillers.
Bon
ding
pas
te
Ant
i-bub
ble
Cav
ity fi
lling
FSP-HV 1528 • • • 2300-2800 ≥ 5 0,6 15-30 150 Low density product, high rigidity, no water uptake. Application in high thickness. Polyvalent product.
FSP-HV 1534 • • • 3000-3500 ≥ 8 0,8 15-30 Core material bonding (PU & PVC foams, balsa, etc). Medium reactivity.Smooth to apply. Polyvalent product.
FSP-HV 1535 • • • 3000-3500 ≥ 8 0,8 40-55 Core material bonding (PU & PVC foams, balsa, etc). Low reactivity.Smooth to apply. Polyvalent product.
FSP-HV 1590 • • 3300-3800 ≥ 8 0,8 60-80 Anti-bubbles and bonding paste, very low reactivity. Smooth to apply.Ideal for big parts and before injection.
FSP-HV 1537 • 5200-6000 ≥ 7 1,3 15-30 Bonding paste, for balsa, PU & PVC foams, etc. Smooth to apply. Medium reactivity. Low shrink. Fast version available.
FSP-HV 1537 S • 5200-6000 ≥ 7 1,3 6-12 Bonding-paste, similar to 1537, with higher reactivity.
FSP-HV 1538 FIBRE • • 15000-20000 ≥ 5,5 1,33 25-40 Fibre-reinforced bonding paste. Good flexibility and low shrink. Smooth to apply. High thixotropy for thickness application. Fast version available.
FSP-HV 1538 S FIBRE • • 15000-20000 ≥ 5,5 1,33 6-12 Fibre-reinforced bonding paste, similar to 1538 with higher reactivity.
FSP-VE 9000 • 4000-5000 ≥ 6,5 1,1 40-65 120 100% vinlyester non-filled bonding paste, for high performance structural bondings. Hand or machine application.
For further information please refer to Products & Applications pages: euromere.com
Application
Reference CommentsVisc
osity
/ po
ises
Thix
. Ind
ex
Den
sity
(± 0
,05)
Gel
tim
e / m
in (o
n 13
0gr m
ass,
at
20°
C, 2
% M
EKP
50)
Exot
herm
ic p
eak
/ °C
(± 1
0°C
)
RESIMER 400 Series, Orthophtalic baseGood mechnical properties and heat resistance, excellent wetting properties, for general purpose applications.
Reference Acc
eler
ated
Thix
otro
ped
Visc
osity
/ po
ises
Den
sity
(±0,
05)
Gel
tim
e / m
in (o
n 20
0gr m
ass,
at
20°
C, 1
% M
EKP
50)
Exot
herm
ic p
eak
/ °C
± 1
0°C
Tens
ile s
tren
gth
Mpa
Flex
ural
str
engt
h M
pa
Flex
ural
mod
ulus
MPa
Elon
gatio
n at
bre
ak %
HD
T / °
C
Comments
Resimer 400 2,5-3,5 1,1 8-11* 160 65 100 4200 1,5 80 Medium reactivity
Resimer 400 HK 5-7 1,1 8-11* 160 65 100 4200 1,5 80 Medium reactivity, for tropical climate.
Resimer 411 • • 15-25 1,1 35-40 125 65 100 4200 1,5 80 Adapted to warm seasons
Resimer 411 S • • 15-20 1,1 25-30 (3% de PMEC) 140 65 100 4200 1,5 80 Lightly accelerated, tropicalized.
Resimer 411 Blanche • • 15-25 1,1 35-40 125 65 100 4200 1,5 80 Adapted to warm seasons
Resimer 412 • • 15-25 1,1 20-30 140 65 100 4200 1,5 80 Winter version
Resimer 412 Blanche • • 15-25 1,1 20-30 140 65 100 4200 1,5 80 Winter version
* with addition of 0,5% of cobalt (solution at 6%) in the resin
For further information please refer to Products & Applications pages: euromere.com
RESIMER 500 Series, orthophtalic base, Low Styrene EmissionLow styrene content and low reactivity, for spray up application in high thickness.
Reference Acc
eler
ated
Thix
otro
ped
Visc
osity
/ po
ises
Den
sity
(±0,
5)
Gel
tim
e / m
in (s
ur m
asse
de
200g
r, à
20°C
, 1%
PM
EC 5
0)
Exot
herm
ic p
eak
/ °C
± 1
0°C
Tens
ile s
tren
gth
Mpa
Flex
ural
str
engt
h M
pa
Flex
ural
mod
ulus
MPa
Elon
gatio
n at
bre
ak %
HD
T / °
C
Comments
Resimer 511 Bleue • • 22-27 1,1 65-80 125 65 100 4200 1,5 80
Blue resin with high thix. for good application properties in vertical. Controlled exothermic peak. Low reactivity.
Resimer 512 Bleue • • 18-22 1,1 50-70 125 65 100 4200 1,5 80
Blue resin with high thix. for good application properties in vertical. Controlled exothermic peak. High reactivity.
For further information please refer to Products & Applications pages: euromere.com
RESIMER 600 Series, isophtalic baseGood mechanical properties, good resistance to hydrolysis and chemical products. High wetting properties. Good storage stability.For laminates requiring high mechanical performance.
Reference Acc
eler
ated
Thix
otro
ped
Visc
osity
/ po
ises
Den
sity
(±0,
5)
Gel
tim
e / m
in (o
n 20
0gr m
ass,
at
20°
C, 1
% M
EKP
50)
Exot
herm
ic p
eak
/ °C
± 1
0°C
Tens
ile s
tren
gth
Mpa
Tens
ile m
odul
us M
Pa
Flex
ural
str
engt
h M
pa
Flex
ural
mod
ulus
MPa
Elon
gatio
n at
bre
ak %
HD
T / °
C
Comments
Resimer 600 5-7 1,1 8-12* 190 80 3300 130 3400 4 90 Medium reactivity
Resimer 611 • • 9-11 1,1 35-45 135 80 3300 130 3400 4 90 Medium reactivity, adapted to warm and wet environments
Resimer 611 S • • 9-11 1,1 25-30 (3% de PMEC) 135 80 3300 130 3400 4 90 Tropicalised resin, better storage stability
Resimer 612 • • 9-11 1,1 20-30 110 80 3300 130 3400 4 90 Winter version (high reactivity)
* with addition of 0,5% of cobalt (solution at 6%) in the resin
For further information please refer to Products & Applications pages: euromere.com
RESIMER 800 Series, 100% vinylester baseExcellent mechanical and chemical resistance. Good resistance to corrosion and hydrolysis.For high performance applications.
Reference Acc
eler
ated
Thix
otro
ped
Visc
osity
/ po
ises
Den
sity
(±0,
5)
Gel
tim
e / m
in (s
ur m
asse
de
200g
r, à
20°C
, 1%
PM
EC 5
0)
Exot
herm
ic p
eak
/ °C
± 1
0°C
Tens
ile s
tren
gth
Mpa
Tens
ile m
odul
us M
Pa
Flex
ural
str
engt
h M
pa
Flex
ural
mod
ulus
MPa
Elon
gatio
n at
bre
ak %
HD
T / °
C
Comments
Resimer 811 • • 9-11 1,1 35-45 150 72 3600 130 3700 2 135 Low reactivity
Resimer 812 • • 9-11 1,1 15-25 150 72 3600 130 3700 2 135 High reactivity
For further information please refer to Products & Applications pages: euromere.com
Casting resins
Reference Visc
osity
/ po
ises
Den
sity
(±0,
5)
Thix
. ind
ex
Gel
tim
e / m
in (o
n 13
0gr m
ass,
at
20°C
, 2%
MEK
P 50
)
Exot
herm
ic p
eak
/ °C
MDC-LP 250-350 0,8 ≥ 2,5 15-25 ± 70
MDC-17880 180-200 1,13 ≥ 3 15-20 ± 75
For further information please refer to Products & Applications pages: euromere.com
Comments
Low density, good casting properties, low shrink close to 0.Sans charge abrasives.
Low shrink, good reproduction of details, no abrasive fillers.Ideal for rotomoulding process.
FSP-NR > No-roll lightweight product
Reference Application Visc
osity
/ po
ises
Thix
. Ind
ex
Den
sity
(± 0
,05)
Gel
tim
e / m
in (o
n 13
0gr m
ass,
at 2
0°C
, 2%
MEK
P 50
)
Comments
FSP-NR 1556 Spray 2300-2800 ≥ 5 0,9 15-30Lightweight product, for no-roll spray up application (simultaneous spray with fiberglass).Fast cure, low shrink and exotherm.Improved productivity.
For further information please refer to Products & Applications pages: euromere.com
Barrier-Coat : Protective coat applied directly behind gelcoat, to replace the first layer of laminated skin coat generally done with VE or Iso resin + fiberglass.
Reference Application Iso-
Viny
lest
er b
ase
100%
vin
yles
ter b
ase
Visc
osity
/ po
ises
Thix
. Ind
ex
Gel
tim
e / m
in (o
n 13
0gr
mas
s, a
t 20°
C, 2
% M
EKP
50)
Tim
e be
fore
ove
r la
min
atio
n / m
in
Den
sity
(±0,
5)
Comments
FSP-BC 1700 Spray • 80-100 ≥ 4 10-20 45 0,8 ± 0,05 Low viscosity, high reactivity.
FSP-BC 1700 T Spray • 180-220 ≥ 5 10-15 45 0,8 ± 0,05 High thixotropy
For further information please refer to Products & Applications pages: euromere.com
CNC > Tooling pastes for CNC-machined plugs and models
Reference Application Base Visc
osity
/ po
ises
Thix
. Ind
ex
Gel
tim
e / m
in (o
n 10
0gr m
ass,
at
20°C
, 2%
MEK
P 50
)
Den
sity
(±0,
5)
Shor
e D
Har
dnes
s
HD
T / °
C in
film
Comments
CNC-2002 HS Hand / Extrusion Polyester 7000-12000 >6 120-240 1,1 70-75 45Low reactivity, specially adapted to thick single layer application, by extrusion, with drum pump equipment (viscous product equipment).
CNC-3000 LG Spray Polyester / VE 400-550 >3,5 3-8 0,6 68 60 Hybrid base, higher hardness and heat resistance.
For further information please refer to Products & Applications pages: euromere.com
Reference Application Visc
osity
/ po
ises
Thix
. Ind
ex
Gel
tim
e / m
in (o
n 25
0gr m
ass,
at
20°C
, 2%
MEK
P 50
)
Den
sity
(± 0
,05)
Comments
EUROLAQUE BLANCHE Brush or spray 70-100 ≥ 4,5 15-20 1,25 White polyester laque for the finishing of plugs, moud refit, or various topcoat uses. Easy to sand. High gloss. Good aging properties.
For further information please refer to Products & Applications pages: euromere.com
Eurogel GCP 800 Series, 100% vinylester base
Applications : Moulds, tanks Good resistance to temperature and to chemical products. High gloss and hardness.Standard colours : green, black, transparent.
Reference Application In m
old
Topc
oat
Visc
osity
/ po
ises
Thix
. Ind
ex
Den
sity
(± 0
,5)
Tens
ile s
tren
gth
Mpa
Tens
ile m
odul
us M
Pa
Flex
ural
str
engt
h M
pa
Flex
ural
mod
ulus
MPa
Elon
gatio
n at
bre
ak %
HD
T / °
C
Eurogel GCP-812 Spray • 120-170 ≥ 5 10-15 1,1 72 3600 130 3700 2 135
Eurogel GCP-811 Spray • 120-170 ≥ 5 15-30 1,1 72 3600 130 3700 2 135
For further information please refer to Products & Applications pages: euromere.com
Cured base resin properties
Gel
tim
e / m
in (o
n 20
0gr m
ass,
at
20°C
, 1%
LPT
)
Polyester primers for the finishing of models and plugs, and preparing of metal parts before painting.
Reference Application Visc
osity
/ po
ises
Thix
. Ind
ex
Gel
tim
e / m
in (o
n 20
0gr m
ass,
at
20°C
, 1%
MEK
P 50
)
Can
be
sand
ed a
fter /
min
Den
sity
(± 0
,05)
Comments
PRIMER 1206 Pot gun / Machine 80-100 ≥ 4 20-30 60 1,25Easy to sand, low paper clogging. Good surface appearance, no porosité, satin finish.Allows a fast repair of surface defects. Low styrene emission.
PRIMER 1202 Machine 70-80 ≥ 4 3-6 30-45 1,15
Very high reactivity.Fast dry.Very good surface tension.Enables thinner layers.Easy to sand. Low paper clogging..Excellent adhesion to cast iron and other metals.Resistant to corrosion.Low styrene content.
PRIMER 5000 Hand 4500-5500 ≥ 4,5 5,8 45-60 1,5Finishing primer for hand application, to fill, or repair surfaces before painting. Catalyze with MEKP 50. Fast cure. Easy sanding. High rigidity and HDT.
For further information please refer to Products & Applications pages: euromere.com
RESIMER 800 Series, 100% vinylester baseExcellent mechanical and chemical resistance. Good resistance to corrosion and hydrolysis.RESIMOLD SeriesFast moulding system with very low shrink.
Reference Acc
eler
ated
Thix
otro
ped
Visc
osity
/ po
ises
Den
sity
(±0,
5)
Gel
tim
e / m
in (o
n 20
0gr m
ass,
at
20°C
, 1%
MEK
P 50
)
Exot
herm
ic p
eak
/ °C
± 1
0°C
Tens
ile s
tren
gth
Mpa
Tens
ile m
odul
us M
Pa
Flex
ural
str
engt
h M
pa
Flex
ural
mod
ulus
MPa
Elon
gatio
n at
bre
ak %
HD
T / °
C
Comments
Resimer 811 • • 9-11 1,1 35-45 150 72 3600 130 3700 2 135 Low reactivity
Resimer 812 • • 9-11 1,1 15-25 150 72 3600 130 3700 2 135 High reactivity
Resimold • • 65-80 1,3 15-20(1,5% MEKP50) 180 85 110 1,8 100 Low shrink resin for mould production. Fast
process. Excellent dimensional stability.
For further information please refer to Products & Applications pages: euromere.com
FSP-SC > Sprayable core material
Reference Application Visc
osity
/ po
ises
Thix
. ind
ex
Den
sity
(± 0
,05)
Gel
tim
e / m
in (o
n 13
0gr m
ass,
at 2
0°C
, 2%
MEK
P 50
)
Comments
FSP-SC 1527 Spray 550-700 ≥ 5 0,7 15-20
Application in sandwich construction, to replace fibreglass, felt, foam, and other core materials. High mechanical properties, high rigidity, no water uptake. Significant time savings, no roll, application up to 5mm in vertical without sagging. Improved surface appearance (low exotherm, low shrink, reduction of fiber-marking) Low styrene content.
For further nformation please refer to Products & Applications pages: euromere.com
TR Industries : Release agents and mould care products.
Référence Description Conditionnement
TR 104 Wax release, with high temperature resistance Boite de 400 gr
TR 214 Mold cleaner - Liquid, without toluene, for cleaning and reuse wax 1 Gallon
TR 315 Strong polish compound, fast elimination of scratches and other surface defects. Can be followed with TR-311 to reach a high quality finishing with high gloss. 1 Gallon
TR 900 Semi-permanent liquid agent 1 Gallon
TR 905 Cleaning solvent - very high cleaning power 1 Gallon
TR 910 Semi-permanent liquid sealer 1 Gallon
TR 940 One shot sprayable semi-permanent liquid agent 1 Gallon
For further information please refer to Products & Applications pages: euromere.com