eui spec sheet industry 475hp tot 1350hp

8/10/2019 EUI Spec Sheet Industry 475HP Tot 1350HP

http://slidepdf.com/reader/full/eui-spec-sheet-industry-475hp-tot-1350hp 1/29

® C15 ACERT ™ 403 bkW / 540 bhp

2100 rpm

Industrial

Image shown may not reflectactual engine

CATERPILLAR ENGINE

SPECIFICATIONSI-6, 4-Stroke-Cycle Diesel

Bore......................................................... 137.2 mm (5.4 in)Stroke.................................................... 171.4 mm (6.75 in)Displacement.......................................... 15.2 L (927.56 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio....................................................... 18:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb)........ 1332 kg, 2937 lb

FEATURES

Emissions

Meets Tier 3, Stage IIIA emission requirements. Tier 3refers to EPA (U.S.) standards. Stage IIIA refers toEuropean standards.

Worldwide Supplier Capability

Caterpillar- Casts engine blocks, heads, cylinder liners, and

flywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable product.

Testing

Prototype testing on every model:- proves computer design- verifies system torsional stability- functionality tests every model

Every Caterpillar engine is dynamometer tested underfull load to ensure proper engine performance.

Full Range of Attachments

Wide range of bolt-on system expansion attachments,factory designed and tested.

Unmatched Product Support Offered ThroughWorldwide Caterpillar Dealer Network

More than 1,800 dealer outletsCaterpillar factory-trained dealer technicians service

every aspect of your industrial engine99.7% of parts orders filled within 24 hours worldwideCaterpillar parts and labor warrantyPreventive maintenance agreements available for repairbefore failure options

Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards to determine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products

Web Site

For all your industrial power requirements, visitwww.cat-industrial.com.

7 August 2006 1:31 AM



®

C15 ACERT ™ INDUSTRIAL ENGINE

403 bkW (540 bhp)

STANDARD ENGINE EQUIPMENT

Air Inlet System

ATAAC

Turbocharged

Control System

Electronic governingPTO speed controlProgrammable ratingsCold mode start strategyAutomatic altitude compensationPower compensation for fuel temperatureProgrammable low and high idle and total engine limitElectronic diagnostics and fault loggingEngine monitoring systemJ1939 Broadcast (diagnostic and engine status)ADEM™ A4

Cooling System

Thermostats and housing, vertical outletJacket water pump, centrifugalWater pump, inlet

Exhaust System

Exhaust manifold, dryOptional exhaust outlet

Flywheels and Flywheel Housing

SAE No. 1 Flywheel housing

Fuel System

MEUI injection

Fuel filter, secondary (2 micron high performance)Fuel transfer pumpFuel priming pumpACERT™ Technology

Lube System

Crankcase breatherOil coolerOil fillerOil filterOil pan front sumpOil dipstickOil pump (gear driven)

General

Paint, Caterpillar YellowVibration damperLifting eyes

2 7 August 2006 1:31 AM



®


403 bkW (540 bhp)

PERFORMANCE CURVES

IND - C (Intermittent) - DM7520-00

TorqueN•m

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW

Torque N•m BSFC g/kW-hr Fuel Rate L/hr

2100 403 1832 227.7 109.4

2000 403 1924 226.5 108.8

1900 403 2025 225 108.1

1800 403 2138 223.5 107.4

1700 398 2236 222 105.3

1600 390 2325 220.8 102.5

1500 378 2404 219.7 98.9

1400 362 2466 218.7 94.2

1300 331 2434 218.1 86.1

1200 268 2134 217.3 69.5

1100 242 2102 215.9 62.3

3 7 August 2006 1:31 AM



® C18 ACERT ™ 470 bkW / 630 bhp

2100 rpm

Industrial


CATERPILLAR ENGINE


Bore....................................................... 145.0 mm (5.71 in)Stroke...................................................... 183.0 mm (7.2 in)Displacement....................................... 18.1 L (1,104.53 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.3:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......1332 kg (2937 lb)

FEATURES


Caterpillar- Casts engine blocks, heads, cylinder liners, andflywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enables

Caterpillar to produce high quality, dependable product.

Testing









Web Site


2 November 2006 3:13 AM



®


470 bkW (630 bhp)


Air Inlet System

Turbocharged Aftercooled -- 429-470 bkW (575-630

bhp)Twin Turbocharged Aftercooled -- 522-597 bkW(700-800 bhp)ATAAC

Control System

Electronic governingPTO speed controlProgrammable ratingsCold mode start strategyAutomatic altitude compensationPower compensation for fuel temperatureProgrammable low and high idle and total engine limit

Electronic diagnostics and fault loggingEngine monitoring systemJ1939 Broadcast (diagnostic and engine status)ADEM™ A4

Cooling System


Exhaust System




Fuel System

MEUI injection


Lube System


General


2 2 November 2006 3:13 AM



®


470 bkW (630 bhp)

PERFORMANCE CURVES


TorqueN•m

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW


2100 470 2137 233.8 131.0

2000 470 2244 229.9 128.8

1900 470 2362 224.5 125.8

1800 470 2493 218.9 122.6

1700 465 2611 214.5 118.8

1600 455 2714 212.5 115.2

1500 441 2807 211.4 111.1

1400 422 2879 210.7 106.0

1300 387 2842 210.3 97.0

1200 309 2457 211.3 77.8

1100 258 2243 214.4 66.0

3 2 November 2006 3:13 AM



®


470 bkW (630 bhp)

RATINGS AND CONDITIONS

IND - C (Intermittent) Intermittent service wheremaximum power and/or speed are cyclic (time at full

load not to exceed 50%).

Engine Performance Diesel Engines — 7 liter andhigher

All rating conditions are based on SAE J1995, inlet airstandardconditions of 99 kPa (29.31 in. Hg) dry barometer and25°C (77°F)temperature. Performance measured using a standardfuel with fuelgravity of 35°API having a lower heating value of42,780 kJ/kg(18,390 btu/lb) when used at 29°C (84.2°F) with adensity of 838.9 g/L.

Engine Dimensions

(1) Length 1388.2 mm

(2) Width 920.7 mm

(3) Height 1243.1 mm

Note: Do not use for installation design. Seegeneral dimension drawings for detail(Drawing # 2588747 ).

Performance Number: DM7699-01

Feature Code: C18DI01

Materials and specifications are subject to change without notice.

8678268

© 2006 Caterpillar

All rights reserved.

The International System of Units (SI) is used in this publication.

CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," and thePOWER EDGE™ trade dress, as well as corporate and product identityused herein, are trademarks of Caterpillar and may not be used without

permission.



® C18 ACERT ™ 522 bkW / 700 bhp

2100 rpm

Industrial


CATERPILLAR ENGINE


Bore....................................................... 145.0 mm (5.71 in)Stroke...................................................... 183.0 mm (7.2 in)Displacement....................................... 18.1 L (1,104.53 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.3:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......1332 kg (2937 lb)

FEATURES


Caterpillar- Casts engine blocks, heads, cylinder liners, andflywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enables

Caterpillar to produce high quality, dependable product.

Testing









Web Site


17 August 2006 6:37 AM



®


522 bkW (700 bhp)


Air Inlet System



Control System



Cooling System


Exhaust System




Fuel System

MEUI injection


Lube System


General


2 17 August 2006 6:37 AM



®


522 bkW (700 bhp)






Engine Dimensions


(2) Width 974.0 mm






7657637

© 2006 Caterpillar



CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," aswell as corporate and product identity used herein, are trademarks of

Caterpillar and may not be used without permission.



® C18 ACERT ™ 448 bkW / 600 bhp

2100 rpm

Industrial


CATERPILLAR ENGINE


Bore....................................................... 145.0 mm (5.71 in)Stroke...................................................... 183.0 mm (7.2 in)Displacement.............................................. 18.1 L, 1106 in³Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.5:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......1332 kg (2937 lb)Length................................................1388.2 mm (54.65 in)Width....................................................920.7 mm (36.25 in)Height................................................ 1243.1 mm (48.94 in)

FEATURES

Emissions

Meets Tier 3, Stage IIIA emission requirements. Tier 3refers to EPA (U.S.) standards. Stage IIIA refers toEuropean standards.


Caterpillar- Casts engine blocks, heads, cylinder liners, and

flywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable product.

Testing









Web Site


23 December 2005 2:45 AM



®


448 bkW (600 bhp)


Air Inlet System



Control System



Cooling System


Exhaust System




Fuel System

MEUI injection


Lube System


General


2 23 December 2005 2:45 AM



®


448 bkW (600 bhp)

PERFORMANCE CURVES

IND - B - DM8169-00

TorqueN•m

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW


2100 448 2035 225.3 120.2

2000 448 2137 223.5 119.2

1900 448 2249 219.3 117.0

1800 448 2374 214.7 114.5

1700 443 2486 211.4 111.5

1600 433 2584 211.5 109.2

1500 420 2673 212.5 106.4

1400 402 2742 212.9 102.0

1300 368 2706 211.1 92.7

1200 294 2340 209.1 73.3

1100 246 2136 208.1 61.0

3 23 December 2005 2:45 AM



®


448 bkW (600 bhp)


IND - B For service where power and/or speed arecyclic (time at full load not to exceed 80%).



Engine Dimensions

(1) Length

(2) Width

(3) Height

See page1-Specificationsfor Dimensions

Note: Do not use for installation design. Seegeneral dimension drawings for detail(Drawing # null ).




5959430

© 2005 Caterpillar



CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," aswell as corporate and product identity used herein, are trademarks of

Caterpillar and may not be used without permission.



® C27 ACERT ™ 653 bkW / 875 bhp

2100 rpm

Engine


CATERPILLAR ENGINE

SPECIFICATIONSVee 12 Cylinder, 4-Stroke-Cycle Diesel

Bore......................................................... 137.2 mm (5.4 in)Stroke...................................................... 152.4 mm (6.0 in)Displacement..................................... 27.03 L (1,649.47 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.5:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......2946 kg (6495 lb)

FEATURES

Emissions

Meets Tier 2 emissions requirements. Tier 2 refers toEPA (U.S) standards.


Caterpillar- Casts engine blocks, heads, cylinder liners, andflywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable product.

Testing






More than 1,800 dealer outletsCaterpillar factory-trained dealer technicians serviceevery aspect of your industrial engine99.7% of parts orders filled within 24 hours worldwideCaterpillar parts and labor warrantyPreventive maintenance agreements available for repairbefore failure options


Web SiteFor all your industrial power requirements, visitwww.cat-industrial.com.

20 March 2007 5:09 AM



®

C27 ACERT ™ Engine

653 bkW (875 bhp)


Air Inlet System

Turbocharged Air to Air Aftercooled

Control System

Electronic governingPTO speed controlProgrammable ratingsCold mode start strategyAutomatic altitude compensationPower compensation for fuel temperatureProgrammable low and high idle and total engine limitElectronic diagnostics and fault loggingEngine monitoring systemJ1939 Broadcast (diagnostic and engine status)ADEM™ A4

Cooling System


Exhaust System




Fuel System

MEUI injection


Lube System


General


2 20 March 2007 5:09 AM



®


653 bkW (875 bhp)

PERFORMANCE CURVES

IND - B - DM9038-00

TorqueN•m

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW


2100 653 2968 206.6 160.8

2000 653 3117 202.9 157.8

1900 653 3281 200.3 155.8

1800 653 3463 198.3 154.3

1700 646 3628 197.7 152.2

1600 632 3771 197.9 149.1

1500 613 3900 199.9 146.0

1400 586 4000 201.8 141.1

1300 538 3949 202.6 129.8

3 20 March 2007 5:09 AM



®


653 bkW (875 bhp)


IND - B For service where power and/or speed arecyclic (time at full load not to exceed 80%).



Engine Dimensions


(2) Width 1464.3 mm




Feature Code: C27DI01 Arr. Number: 2520148


9607603

© 2007 Caterpillar



CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," and thePOWER EDGE trade dress, as well as corporate and product identity

used herein, are trademarks of Caterpillar and may not be used withoutpermission.



®


709 bkW (950 bhp)

PERFORMANCE CURVES

IND - B - DM9030-00

TorqueN•m

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW


3 14 November 2008 4:40 AM



®


709 bkW (950 bhp)

PERFORMANCE CURVES

IND - B - DM9030-00

EngineTorque

lb•ft

EnginePower bhp

BSFClb/bhp-hr

Engine Speed rpm

English

Engine Speedrpm

Engine Powerbhp

Engine Torquelb•ft

BSFC lb/bhp-hr Fuel Rategal/hr

4 14 November 2008 4:40 AM



® C32 ACERT 839 bkW / 1125 bhp

2100 rpm

Industrial


CATERPILLAR ENGINE


Bore....................................................... 145.0 mm (5.71 in)Stroke.................................................... 162.0 mm (6.38 in)Displacement....................................... 32.1 L (1,958.86 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.5:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......2946 kg (6495 lb)

FEATURES

Emissions

Meets Tier 2 emissions requirements. Tier 2 refers toEPA (U.S) standards.


Caterpillar- Casts engine blocks, heads, cylinder liners, andflywheel housings

- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable product.

Testing









Web Site


11 March 2008 2:27 AM



®

C32 ACERT INDUSTRIAL ENGINE

839 bkW (1125 bhp)

PERFORMANCE CURVES


Torque N m

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW

Torque N m BSFC g/kW-hr Fuel Rate L/hr

2100 839 3815 214.7 214.7

2000 839 4006 210.6 210.6

1900 839 4217 209.7 209.8

1800 839 4451 207 207.0

1700 830 4662 204.7 202.6

1600 812 4846 203.6 197.1

1500 787 5010 203.1 190.5

1400 754 5143 202.4 181.9

1300 691 5076 202.2 166.6

1200 599 4764 204.6 146.0

1100 512 4448 205.8 125.7

3 11 March 2008 2:27 AM



®

C32 ACERT INDUSTRIAL ENGINE

839 bkW (1125 bhp)




Engine Performance Diesel Engines 7 liter and higherAll rating conditions are based on SAE J1995, inlet air

standardconditions of 99 kPa (29.31 in. Hg) dry barometer and25°C (77°F)temperature. Performance measured using a standardfuel with fuelgravity of 35°API having a lower heating value of42,780 kJ/kg(18,390 btu/lb) when used at 29°C (84.2°F) with adensity of 838.9 g/L.

Engine Dimensions


(2) Width 1478.7 mm




Feature Code: C32DI02 Arr. Number: 2638150


11699832

© 2008 Caterpillar



CAT, CATERPILLAR, SAFETY.CAT.COM their respective logos,

eui spec sheet industry 475hp tot 1350hp

Documents