etp electrical metallic tubing (emt) fittings and ... -for... · page 1 tw-1 tw etp electrical...
TRANSCRIPT
Effective September, 2005Copyright 2005
800-621-1506www.appletonelec.com
PAGE 1
TW-1TW
ETP Electrical Metallic Tubing (EMT) Fittings andLiquidtight Flexible Metallic Conduit Connectors
TW-1 — Steel connectors and couplings including gland compression, and set screw types.
UL Listed Raintight ETP steel EMT connectors and couplings.
Flexel™ hand-bendable steel flexible fittings.
Steel liquidtight flexible metallic conduit connectors.
TW-2 — Combination couplings, 90° connectors, cap/hoods, con-version adapter, clamps and straps.
Benders and high strength steel handles.
Type 6000Compression Coupling
Type 7000Compression Connector
Type 4000Set Screw Connector
Type 5000Set Screw Coupling
TWCC-50 Combination
Coupling
TWL-50L 90° Connector
EF-125 Entrance Cap
TWCL-50 Clamp TW2500 Strap Standard Bender With Degree Scale
Flexel™ Type FLAFlexible Fittings
Type 4QSLiquidtight Connectors
Effective September, 2008Copyright 2008
PAGE 2
800-621-1506www.appletonelec.com
TW-1
TW
Effective September, 2008Copyright 2008
PAGE 2
Steel EMT Set-Screw Connectors and Couplings
4000S Series Connectors
Features • Heavy steel walls.
• Concretetight when taped.
• Pre-set/Pre-staked set screws.
• Male hub threads NPS.
• Available with insulated throat.
• Three-way combination screws.
• Insulated throat connector rated 90°C.
Standard Materials • Steel.
Standard Finish• Zinc Plated.
Third Party Certification• UL Listed: E-14815 (1/2” to 2”)
• UL Listed: E-14816 (2-1/2” to 4”)
Applicable Third Party Standards• UL 514B
• CSA Standard C22.2 No. 18
• NEMA FB-1
• Federal Spec. W-F-408E
Type 4050S — Type 4100S Type 4125S — Type 4400S
Type 5125S — Type 5400S
Insulated Trade Throat Dimensions in Inches Wt. Lbs. Ctn. Std. Size Catalog Catalog Body Max Thread Per 100 Qty. Pkg. (inches) Number Number Length Dia. Length
1/2 4050S 4050ST 1-1/32 27/32 7/16 10 25 250 3/4 4075S 4075ST 1-3/32 1-5/64 7/16 15 20 200
1 4100S 4100ST 1-3/16 1-5/16 7/16 23 20 100 1-1/4 4125S 4125ST 1-3/4 1-11/16 9/16 42 10 40
1-1/2 4150S 4150ST 1-15/16 1-15/16 9/16 53 10 40 2 4200S 4200ST 2-3/16 2-3/8 5/8 75 5 20 2-1/2 4250S 4250ST 2-3/8 3-1/8 7/8 130 — 10 3 4300S 4300ST 2-7/8 3-3/4 7/8 230 — 5
3-1/2 4350S 4350ST 3 4-1/4 1 250 — 5 4 4400S 4400ST 3-3/16 4-3/4 1 250 — 5
5000S Series Couplings
Features • Heavy steel walls.
• Concretetight when taped.
• Pre-set/Pre-staked set screws.
• Three-way combination screws.
Standard Materials • Steel.
Standard Finish• Zinc Plated.
Third Party Certification• UL Listed: E-14815 (1/2” to 2”)
• UL Listed: E-14816 (2-1/2” to 4”)
Applicable Third Party Standards• UL 514B
• CSA Standard C22.2 No. 18
• NEMA FB-1
• Federal Spec. W-F-408E
All dimensions are approximate and subject to change.
Type 5050S — Type 5100S
Trade Size Catalog Dimension in Inches Wt. Lbs. Ctn. Std.(Inches) Number Body Length Max. Dia. Per 100 Qty. Pkg.
1/2 5050S 1-3/4 27/32 10 25 250
3/4 5075S 2-1/8 1-5/64 16 20 200 1 5100S 2-1/2 1-5/16 25 20 100 1-1/4 5125S 3-1/4 1-11/16 45 10 40
1-1/2 5150S 3-3/4 1-15/16 60 10 40 2 5200S 4 2-3/8 82 5 20 2-1/2 5250S 4-1/4 3-1/8 166 — 10 3 5300S 4-1/2 3-3/4 213 — 5
3-1/2 5350S 4-3/4 4-1/4 260 — 5 4 5400S 5 4-3/4 300 — 5
File #E14815
Effective September, 2008Copyright 2008
800-621-1506www.appletonelec.com
PAGE 3
TW-1TW
Effective September, 2008Copyright 2008
Steel EMT Compression Connectors and Couplings
6000S Series Couplings
Features
• Concretetight.
Standard Materials
• Steel Body and Nut.
Standard Finish
• Zinc Plated
Third Party Certification• UL Listed: E-14815 (1/2” to 2”)
• UL Listed: E-14816 (2-1/2” to 4”)
• Listed Concretetight 1/2” through 4”.
Applicable Third Party Standards
• UL 514B
• CSA Standard C22.2 No. 18
• NEMA FB-1
• Federal Spec. W-F-408E
Trade Size Catalog Dimension in Inches Wt. Lbs. Ctn. Std.(Inches) Number Body Length Max. Dia. Per 100 Qty. Pkg.
1/2 6050S 1-3/8 27/32 19 25 250
3/4 6075S 1-1/2 1-3/8 25 20 200
1 6100S 1-21/32 1-5/16 39 20 100
1-1/4 6125S 2-1/2 1-11/16 88 5 25
1-1/2 6150S 2-1/2 1-15/16 104 5 25
2 6200S 2-1/2 2-3/8 149 2 10
2-1/2* 6250S 4-1/4 3-1/8 240 — 10
3* 6300S 4-1/2 3-3/4 350 — 5
3-1/2* 6350S 4-3/4 4-1/4 475 — 5
4* 6400S 5 4-3/4 600 — 5
Type 6050S — Type 6400S
7000S Series Connectors
Features • Male hub threads NPS.
• Available with insulated throat.
• Concretetight.
• Insulated throat connector rated 90°C.
Standard Materials • Steel Body and Nut.
Standard Finish• Zinc Plated
Third Party Certification• UL Listed: E-14815 (1/2” to 2”)
• UL Listed: E-14816 (2-1/2” to 4”)
• Listed Concretetight 1/2” through 4”.
Applicable Third Party Standards• UL 514B
• CSA Standard C22.2 No. 18
• NEMA FB-1
• Federal Spec. W-F-408E
All dimensions are approximate and subject to change.
Type 7050S — Type 7400S
Insulated Trade Throat Dimensions in Inches Wt. Lbs. Ctn. Std. Size Catalog Catalog Body Max Thread Per 100 Qty. Pkg. (inches) Number Number Length Dia. Length
1/2 7050S 7050ST 1-1/8 1-1/16 3/8 15 25 250 3/4 7075S 7075ST 1-1/32 1-1/4 7/16 21 25 250
1 7100S 7100ST 1-1/4 1-9/16 7/16 32 20 200 1-1/4 7125S 7125ST 1-13/16 2 9/16 72 5 25
1-1/2 7150S 7150ST 2 2-3/16 9/16 85 5 25 2 7200S 7200ST 2-1/4 2-11/16 11/16 124 2 10 2-1/2* 7250S 7250ST 2-3/8 3-11/32 7/8 160 — 10 3* 7300S 7300ST 2-7/8 4 7/8 265 — 5
3-1/2* 7350S 7350ST 3 4-1/2 1 425 — 5 4* 7400S 7400ST 3-3/16 5-1/16 1 600 — 5
File #14815
* Rated for steel EMT, Aluminum and steel RMC, and steel IMC.
* Rated for steel EMT, Aluminum and steel RMC, and steel IMC.
Effective September, 2008Copyright 2008
PAGE 4
800-621-1506www.appletonelec.com
TW-1
TW
File #14815
EMT Steel Set-Screw Connectors & Couplings-USA
4000US Series Connectors
Features:• Heavy steel walls
• Concretetight when taped
• Pre-set/Pre-staked set screws
• Male hub threads NPS
• Available with insulated throat
• Three-way combination screws 1/2” through 2”
• Slotted hexhead screws 2-1/2” through 4”
• Insulated throat temperature
rating = 90°C.
Material/Finish:• Steel/Zinc Plated
Third Party Certification:• UL Listed: E-14895
• CSA Certified File No. 28507
Applicable Third Party Standards:• UL Standard: 514B
• CSA Standard: C22.2 No. 18
• NEMA: FB-1
• Federal Spec: W-F-408E
5000US Series Couplings
Features:• Heavy steel walls
• Concretetight when taped
• Pre-set/pre-staked set screws
• Three-way combination screws 1/2” through 2”
• Slotted hexhead screws 2-1/2” through 4”
Material/Finish:• Steel/Zinc Plated
Third Party Certification:• UL Listed: E-14895
• CSA Certified: 28507
Applicable Third Party Standards:• UL Standard: 514B
• CSA Standard: C22.2 No. 18
• NEMA: FB-1
• Federal Spec: W-F-408E
Type 4050US — Type 4200US Type 4250US — Type 4400US
Type 5250US — Type 5400USType 5050US — Type 5200US
Made in the USA
Made in the USA
Insulated Trade Throat Dimensions in Inches Size Catalog Catalog Body Max Thread (inches) Number Number Length Dia. Length
1/2 4050US 4050UST 1-5/32 1 3/8 3/4 4075US 4075UST 1-7/32 1-7/32 13/32 1 4100US 4100UST 1-1/2 1-1/2 7/16 11/4 4125US 4125UST 1-11/16 1-29/32 1/2
11/2 4150US 4150UST 1-29/32 2-5/32 17/32 2 4200US 4200UST 2 2-21/32 19/32 21/2 4250US 4250UST 2-5/8 3-3/4 1-1/4 3 4300US 4300UST 3-1/16 4-9/16 1-3/8 31/2 4350US 4350UST 3-1/16 5-11/16 1-13/32 4 4400US 4400UST 3-11/32 5-23/32 1-1/2
Trade Size Catalog Dimensions in Inches (inches) Number Body Length Dia.
1/2 5050US 1-1/2 7/8 3/4 5075US 1-1/2 1-1/8 1 5100US 1-7/8 1-13/32 11/4 5125US 2-3/16 1-3/4
11/2 5150US 2-19/32 2-1/32 2 5200US 2-11/16 2-1/2 21/2 5250US 2-3/4 3-15/16 3 5300US 3-1/8 4-9/16
31/2 5350US 3-5/32 5-1/16 4 5400US 3-3/8 5-23/32
Effective September, 2008Copyright 2008
800-621-1506www.appletonelec.com
PAGE 5
TW-1TW
EMT Steel Compression Connectors & Couplings
7000US Series Connectors
Features:• Male hub threads NPS
• Available with insulated throat
• Concretetight
• Insulated throat temperature
rating = 90°C.
Material:• Steel Body & Nut
Finish:• Zinc Plated
Third Party Certification:• UL Listed: E-14895
• Listed Concretetight 1/2” - 4”
• CSA Certified: 28507
Applicable Third Party Standards:• UL Standard: 514B
• CSA Standard: C22.2 No. 18
• NEMA: FB-1
• Federal Spec: W-F-408E
6000US Series Couplings
Features:• Concretetight
Material:• Steel Body & Nut
Finish:• Zinc Plated
Third Party Certification:• UL Listed: E-14895
• Listed Concretetight 1/2” - 4”
• CSA Certified: 28507
Applicable Third Party Standards:• UL Standard: 514B
• CSA Standard: C22.2 No. 18
• NEMA: FB-1
• Federal Spec: W-F-408E
Made in the USA
File #14815
Made in the USA
Insulated Trade Throat Dimensions in Inches Size Catalog Catalog Body Max Thread (inches) Number Number Length Dia. Length
1/2 7050US 7050UST 1-1/16 31/32 3/8 3/4 7075US 7075UST 1-1/8 1-7/32 13/32 1 7100US 7100UST 1-1/4 1-1/2 7/16 11/4 7125US 7125UST 1-7/16 1-29/32 1/2
11/2 7150US 7150UST 1-9/16 2-5/32 17/32 2 7200US 7200UST 1-11/16 2-11/16 19/32 21/2 7250US 7250UST 4-1/16 4-1/8 1-1/4 3 7300US 7300UST 4-1/8 4-11/16 1-3/8
31/2 7350US 7350UST 4-1/4 5-11/32 1-13/32 4 7400US 7400UST 4-1/2 5-7/8 1-1/2
Trade Size Catalog Dimensions in Inches (inches) Number Body Length Max. Dia.
1/2 6050US 1-11/32 31/32
3/4 6075US 1-11/32 1-7/32 1 6100US 1-13/32 1-1/2 11/4 6125US 1-3/4 1-29/32
11/2 6150US 1-7/8 2-5/32 2 6200US 2-1/8 2-11/16 21/2 6250US 5-1/2 4-1/8 3 6300US 5-1/2 4-11/16
31/2 6350US 5-5/8 5-11/32 4 6400US 5-3/4 5-7/8
Type 7250US — Type 7400US
Type 6250US — Type 6400US
Type 7050US — Type 7200US
Type 6050US — Type 6200US
Effective September, 2008Copyright 2008
PAGE 6
800-621-1506www.appletonelec.com
TW-1
TW
File #E14815
InspectoRidge™Provides external visual inspection aid on outside surface, to assure raintight fittings are installed, without disassembly of conduit run.
UL Listed Raintight Steel EMT Compression Connectors and Couplings
Raintight Gland Compression Connector – 7000SR Series
Use:To ground and secure EMT raceway to boxes and enclosures in wet locations.
Features:• UL Listed Raintight
• InspectoRidgeª external visual inspection aid — See below
• No disassembly required
• Male hub threads NPS
• Available with and without insulated throat
• Concretetight
Material/Finish:• Steel Body & Nut Zinc Electroplated
• Silicone Rubber Internal Sealing Ring
• EPDM Rubber KO Sealing Ring
Raintight Gland Compression Coupling Type – 6000SR Series
Use:To ground and secure EMT raceway sections together in wet locations.Features:• UL Listed Raintight
• InspectoRidgeª external visual inspection aid — See below
• No disassembly required
• Concretetight
Material/Finish:• Steel Body & Nut Zinc Electroplated
• Silicone Rubber Internal Sealing Rings
Type 6050SR — Type 6200SR
Insulated Trade Throat Dimensions in Inches Wt. Lbs. Ctn. Std. Size Catalog Catalog Body Max Thread Per 100 Qty. Pkg. (inches) Number Number Length Dia. Length
1/2 7050SR 7050SRT 1-29/32 1-5/32 7/16 15 25 250 3/4 7075SR 7075SRT 1-31/32 1-3/8 7/16 21 25 250
1 7100SR 7100SRT 2-1/8 1-3/4 15/32 32 20 200 1-1/4 7125SR 7125SRT 2-11/16 2-5/32 17/32 38 5 25
1-1/2 7150SR 7150SRT 2-31/32 2-7/16 9/16 48 5 25 2 7200SR 7200SRT 3-11/32 2-29/32 23/32 62 2 10
Third Party Certification:• UL Listed: E-14895
• Listed RaintightApplicable Third Party Standards:• UL Standard: 514B
• NEMA: FB-1
• Federal Spec: W-F-408E Type 7050SR — Type 7200SR
Trade Size Catalog Dimension in Inches Wt. Lbs. Ctn. Std.(Inches) Number Body Length Max. Dia. Per 100 Qty. Pkg.
1/2 6050SR 2-25/32 1-1/8 19 25 250 3/4 6075SR 3 1-11/32 25 20 200 1 6100SR 3-11/32 1-5/8 39 20 100 1-1/4 6125SR 3-11/16 2 47 5 25 1-1/2 6150SR 3-23/32 2-9/32 56 5 25 2 6200SR 4-1/8 2-3/4 73 2 10
Third Party Certification:• UL Listed: E-14895
• Listed Raintight
Applicable Third Party Standards:• UL Standard: 514B
• NEMA: FB-1
• Federal Spec: W-F-408E
Effective September, 2008Copyright 2008
800-621-1506www.appletonelec.com
PAGE 7
TW-1TW
ETP Flexel® EMT Flexible Fitting
Type FLAFor EMT
Application• The Flexel Fitting is an innovative product in which to couple lengths of EMT together or connect EMT to a panel board, junction box, etc., when and where a change of direction is required in the conduit run.
Features• Easily hand-bendable from straight tubing to 90° or any angle in between. No need to waste time using cumbersome bending equipment.• Rigid enough to maintain configuration until manually re-formed. • Wire pulls through formed bends.• Specially designed so internal diameter remains unchanged, regardless of the bend configuration. • Maintains compliance with NEC's mini-mum radius requirements.• Can be bent to various degrees, including offset and compound angles.• Suitable for use indoors or dry locations wherever EMT is used as a raceway.• Safely conducts the maximum ground fault current required by UL, CSA and the National Electrical Code. No need to pull a separate grounding conductor. Standard Material/FinishFlexible Length: Strip Steel/GalvanizedEnd Fittings: Steel/Galvanized
Compliances UL Listed: E-14895
CSA Certified: LR9795
Applicable Third Party Standards:• UL Standard: 514B
• CSA Standard: C22.2 No. 18
Type FLA
Dimensions are approximate. Consult your local representative for details.
A
B
B
C
D
Dimensions in inches Trade A D Size Catalog Nominal C Max. (inches) Number Length B Radius Offset
11/4 FLA-125 24 141/2 73/4 41/2
11/2 FLA-150 29 143/4 93/4 61/2
2 FLA-200 26 161/4 131/4 41/4
21/2 FLA-250 29 22 16 21/2
3 FLA-300 36 22 17 33/4
31/2 FLA-350 38 22 18 3 4 FLA-400 40 261/2 19 11
Effective September, 2008Copyright 2008
PAGE 8
800-621-1506www.appletonelec.com
TW-1
TW
ETP Steel Liquidtight Fittings
Type 4QS45° and 90°
Application • 4QS liquidtight connectors and liquidtight flex-ible metallic conduit are used in applications where conditions of installation, operation or maintenance require flexibility or protection from liquids, vapors or solids such as: machine tool building, motor and transformer terminations, robotics assembly, air conditioning equipment installation and Class I, Division 2 wiring
Features• Tapered threaded male hub NPT
• Compact, slim diameter with small turning radius
• Furnished with locknut and sealing ring.
• Liquidtight/Raintight/Oiltight
• Suitable for grounding (through 1-1/4”)
• Suitable for wet locations
• Long ferrule prevents pullout and tight bend conduit “pop-out”
• Suitable for use in the following Hazardous Locations:
Class I, Div. 2 per NEC 501.4(B)Class I, Zone 2 per NEC 505.15(C)(2)Class II, Div. 2 per NEC 502.4(A)(1)(e)Class II, Div. 2 per NEC 502.4(B)(2)Class III, Div. 1 per NEC 503.3(A)(2)Class III, Div. 2 per NEC 503.3(B)Intrinsically Safe per NEC 504.20
• Bonding Locknuts are recommended in Haz-ardous Locations. See GL Series in Section CF-2, page 15.
Material/Finish:Straight: Steel/Zinc PlatedAngles: Body: Malleable Iron/Zinc Plated Gland nut, ferrule and locknut: Steel/Zinc PlatedThird Party Certification: UL Listed: 11853
CSA Certified: 9795
UL Listed liquidtight flexible metal conduit fit-tings from 3/8” through 1-1/4” trade sizes are suitable for grounding under NEC 250.118(7).Applicable Third Party Standards:UL Standard: 514BCSA Standard: C22.2 No. 18NEMA: FB-1Federal Spec: W-F-406E
45° Type 4QS-438 — Type 4QS-4200
90° Type 4QS-938 — Type 4QS-9200
Insulated Throat Trade Size Catalog Catalog Dimensions in Inches (inches) Number Number A B C
3⁄8 (1⁄2 KO) 4QS-438 4QS-438T 11⁄4 5⁄8 13⁄32
1⁄2 4QS-450 4QS-450T 13⁄8 5⁄8 13⁄16
3⁄4 4QS-475 4QS-475T 11⁄2 5⁄8 17⁄16
1 4QS-4100 4QS-4100T 113⁄16 21⁄32 13⁄4 11⁄4 4QS-4125 4QS-4125T 2 11⁄16 25⁄32
11⁄2 4QS-4150 4QS-4150T 25⁄16 23⁄32 23⁄8 2 4QS-4200 4QS-4200T 29⁄16 23⁄32 27⁄8
Insulated Throat Trade Size Catalog Catalog Dimensions in Inches (inches) Number Number A B C D
3⁄8 (1⁄2 KO) 4QS-938 4QS-938T 119⁄32 5⁄8 13⁄32 5⁄8
1⁄2 4QS-950 4QS-950T 121⁄32 5⁄8 13⁄16 5⁄8
3⁄4 4QS-975 4QS-975T 125⁄32 5⁄8 17⁄16 29⁄32
1 4QS-9100 4QS-9100T 23⁄16 21⁄32 13⁄4 13⁄16
11⁄4 4QS-9125 4QS-9125T 23⁄8 11⁄16 25⁄32 11⁄4 11⁄2 4QS-9150 4QS-9150T 25⁄8 23⁄32 23⁄8 13⁄8 2 4QS-9200 4QS-9200T 31⁄16 23⁄32 27⁄8 111⁄16
Insulated Throat Trade Size Catalog Catalog Dimensions in Inches (inches) Number Number A B C
3⁄8 (1⁄2 KO) 4QS-38 4QS-38T 7⁄8 5⁄8 13⁄32
1⁄2 4QS-50 4QS-50T 23⁄32 5⁄8 13⁄16
3⁄4 4QS-75 4QS-75T 13⁄16 5⁄8 17⁄16
1 4QS-100 4QS-100T 31⁄32 21⁄32 13⁄4 11⁄4 4QS-125 4QS-125T 13⁄16 43⁄64 25⁄32
11⁄2 4QS-150 4QS-150T 19⁄32 23⁄32 23⁄8 2 4QS-200 4QS-200T 111⁄32 23⁄32 27⁄8
Type 4QS-38 — Type 4QS-200
C
A
B
C
A
B
C
A
B
D
Effective September, 2005Copyright 2005
800-621-1506www.appletonelec.com
PAGE 9
TW-1TW
EMT Connectors and Couplings
Trade Dimensions in Inches Wt. Lbs. Ctn. Std.Catalog No. Size (In.) A B C Per 100 Qty. Pkg.
Combination Couplings – EMT to Rigid Metal Conduit – SteelTWR-50 1/2 11/16 1/2 1 10.0 50 200TWR-75 3/4 11/16 17/32 1-9/32 15.0 25 100TWR-100 1 7/8 17/32 1-19/32 17.0 25 100TWR-125 1-1/4 31/32 27/32 1-15/16 40.0 5 25
Connectors – Two Piece – Concrete Tight – Steel92T050 1/2 5/16 11/32 1-1/16 6.0 50 20092T075 3/4 5/16 7/16 1-9/32 8.8 25 25092T100 1 11/32 13/32 1-5/8 13.0 25 200
Effective September, 2005Copyright 2005
PAGE 10
800-621-1506www.appletonelec.com
TW-1
TW
®
Effective September, 2005Copyright 2005
800-621-1506www.appletonelec.com
PAGE 1
TW-2TW
EMT Couplings, 90˚ Connectors and Caps/Heads
Trade Dimensions in Inches Wt. Lbs. Ctn. Std.Catalog No. Size (In.) A B C Per 100 Qty. Pkg.
Combination Coupling – EMT to Flexible Metal ConduitPressure Cast
TW38-50DC† 1/2 1-9/32 1-1/4 15/16 7.5 25 100
Combination Coupling - EMT to Flexible Metal ConduitMalleable Body/Nut
TWCC38-50† 1/2 27/32 5/8 1-1/16 12.0 10 100
TWCC-50 1/2 7/8 5/8 1-1/16 14.5 10 100
TWCC-75 3/4 1-1/16 21/32 1-5/16 25.0 10 100
TWCC-100 1 1-3/16 27/32 1-7/8 61.0 5 50
Gland Compression 90° Long Connectors – Concrete Tight Malleable – Steel Nut
TWLL-50L 1/2 1-7/8 2-1/16 19/32 32.0 25 100
TWLL-75L 3/4 2-3/16 2-7/16 7/16 50.0 10 50
TWLL-100L 1 2-19/32 3 7/16 105.0 5 25
TWLL-125L 1-1/4 2-13/16 3-5/16 9/16 136.0 5 25
Gland Compression 90° Short Connectors – Concrete Tight Malleable – Steel Nut
TWL-50L 1/2 1-7/32 1-5/16 13/32 20.0 25 100
TWL-75L 3/4 1-5/16 1-7/16 7/16 30.0 10 100
TWL-100L 1 1-5/8 1-9/16 7/16 53.0 5 50
Set Screw Entrance Caps – Malleable Iron – Exclusive “Snap-On” Cover
EF-125 1-1/4 (3) 5/8” and (2) 13/32” 4-5/16 2-7/8 3-5/8 64.0 — 10
EF-150 1-1/2 (3) 25/32”, (2) 9/16” and (1) 3/8” 5 3-5/16 4-11/32 93.0 — 10
EF-200 2 (3) 1”, (2) 3/4 and (3) 17/32” 6-11/32 4-1/2 5-9/16 183.0 — 5
EF-250 2-1/2 (3) 7/8”, (1) 1” and (3) 1-5/16” 9 6-1/4 7-3/4 350.0 — 1
† Not UL Listed.
MaleEndHas
Locknut
MaleEndHas
Locknut
Effective September, 2005Copyright 2005
PAGE 2
800-621-1506www.appletonelec.com
TW-2
TW
EMT Adapters, Clamps and Straps
Trade Dimensions in Inches Wt. Lbs. Ctn. Std.Catalog No. Size (In.) A B C Per 100 Qty. Pkg.
Steel No-Thread to Threaded Fittings – Conversion AdaptersTWAD-50 1/2 7/16 1/8 1 2.2 50 200TWAD-75 3/4 1/2 1/8 1-7/16 4.0 25 100TWAD-100 1 5/8 1/8 1-1/2 6.0 10 100TWAD-125 1-1/4 3/4 3/16 2 11.0 10 100TWAD-150 1-1/2 3/4 3/16 2-1/4 12.0 5 100TWAD-200 2 3/4 1/4 2-13/16 19.0 5 100
Steel – Clamps – EMTTWCL-50 1/2 15/16 15/32 11/16 3.4 100 1000TWCL-75 3/4 1-1/32 17/32 29/32 4.6 100 1000TWCL-100 1 1-5/32 7/16 1-1/8 6.5 50 100TWCL-125 1-1/4 1-11/32 1/2 1-15/32 10.0 50 100TWCL-150 1-1/2 1-11/16 19/32 1-11/16 19.0 50 100TWCL-200 2 1-27/32 5/8 2-5/32 25.0 5 25
CL-250 2-1/2 2-13/16 1-1/8 2-3/4 76.0 5 25CL-300 3 3-5/16 1-5/16 3-3/8 89.0 — 10CL-350 3-1/2 3-7/16 1-5/8 3-7/8 112.0 — 10CL-400 4 3-25/32 1-5/8 4-3/8 128.0 — 10
Trade Dimensions in Inches Wt. Lbs. Ctn. Std.Catalog No. Size (In.) A B C D Per 100 Qty. Pkg.
Malleable – Clamps – EMTTWCL-50MN 1/2 1-1/16 7/8 5/8 1/4 5.0 100 1000TWCL-75MN 3/4 1-3/16 1-1/16 3/4 1/4 6.0 50 500TWCL-100MN 1 1-3/8 1-3/8 13/16 1/4 10.0 50 250TWCL-125MN 1-1/4 1-5/8 1-3/4 7/8 3/8 13.0 25 250TWCL-150MN 1-1/2 1-13/16 1-15/16 15/16 3/8 15.0 25 100TWCL-200MN 2 2-5/16 2-1/2 1-1/16 1/2 20.0 25 100
CL-250MN 2-1/2 2-9/16 3 1-5/16 1/2 71.0 5 25CL-300MN 3 3-3/16 3-13/16 1-1/2 1/2 107.0 5 25CL-350MN 3-1/2 3-3/8 4-7/16 1-11/16 5/8 172.0 2 10CL-400MN 4 3-3/4 5 1-15/16 5/8 266.0 2 10
Trade Dimensions in Inches Wt. Lbs. Ctn. Std.Catalog No. Size (In.) A B C Per 100 Qty. Pkg.
Steel Pipe Straps – Two Hole – EMTTW2500 1/2 1-1/2 2-1/32 5/8 1.0 — 250TW2750 3/4 1-3/4 2-13/32 5/8 1.6 — 250TW2100 1 2-3/32 2-13/16 5/8 2.0 — 100TW2125 1-1/4 2-19/32 3-5/16 3/4 4.0 — 100TW2150 1-1/2 2-11/16 3-7/16 3/4 4.0 — 100TW2200 2 3-1/2 4-3/4 15/16 4.7 25 100
CF250-H 2-1/2 4-3/8 5-5/8 3-1/32 5.7 25 100CF300-H 3 5 6-1/4 1 8.0 25 100CF350-H 3-1/2 6-1/4 7-1/4 1 8.7 25 50CF400-H 4 7 8 1-1/4 9.4 10 50
A
C
B
D
Effective September, 2005Copyright 2005
800-621-1506www.appletonelec.com
PAGE 3
TW-2TW
EMT Display Pack Benders and EMT Benders
EMT Rigid Bending Suggested* Wt. Lbs. Ctn. Std.
Catalog No. Size (In.) Size (In.) Radius Handle Per 100 Qty. Pkg.
Standard Benders – With Degree Scale
B-1† 1/2 — 4” BPH-75 221.0 1 10
B-2 3/4 1/2 5” BPH-75 355.0 1 10
B-3 1 3/4 6” BPH-100 681.0 1 4
“Powr-Jack”® Benders – With Booster Step and Degree Scale
BJ-5 1 3/4 6” BPH-100 742.0 1 2
BJ-6 1-1/4 1 9” BPH-125 1762.0 — 1
Double Groove Benders – With Degree Scale
B-9 1/2 — 3” BPH-75 492.0 1 10
3/4 1/2 4”
High Strength Steel Handles – With Zip Guide
BPH-75†† Use with 38” Long, 3/4” I.P.S. 360.0 1 10 B-1, B-2, B-9
BPH-100 44” Long, 1” I.P.S. 460.0 1 5 B-3, BJ-5
BPH-125 54” Long, 1-1/4” I.P.S. 400.0 1 4 BJ-6
* Handles are not included and must be ordered separately from this page.† Display pack†† Expanded end serves as stub straightener.
B-1
BJ-5
BJ-6
BJ-9
Effective September, 2005Copyright 2005
PAGE 4
800-621-1506www.appletonelec.com
TW-2
TW
®