ethernet/ip™ to reliance automax gateway...an-x-amx!!!!! the an-x-amx gateway provides a migration...
TRANSCRIPT
EtherNet/IP™ to
Reliance AutoMax Gateway AN-X-AMX
The AN-X-AMX Gateway provides a migration path for users looking to upgrade Reliance AutoMax DCS or Remote I/O networks. The AMX gateway has multiple operating modes, these operating modes are all included with the AN-X-AMX and are selected during initial module configuration. The operating modes include DCSNet2, a bridge between EtherNet/IP and a DCSNet network; DCSLOG, for logging DCSNet traffic; AMXRIO, a bridge between EtherNet/IP and AutoMax Remote I/O; and AMXCapt, a Remote I/O or DCSNet data capture tool.
Migration Specifications DCSNet2 In the DCSNet operating mode, the gateway acts as a bridge between Ethernet/IP and a Reliance AutoMax DCSNet network. The AN-X removes the hardware dependence on specific AutoMax interface cards (ISA, PCI, PC Card) allowing any computer or PAC with Ethernet/IP to connect to a DCSNet network.
• DCSNet Master or Slave
• Supports Reliance AutoMax programming software
• Supports a single I/O connection to a ControLogix processor, DCSNet
• Supports up to 15 scheduled connections to a ControlLogix processor, DCSNet2
• Supports EtherNet/IP HMIs to AutoMax controllers
AMXRIO In the AMXRIO operating mode, a PC or PAC Ethernet/IP can connect to a Reliance AutoMax Remote I/O network. The module acts as a master on the AutoMax remote I/O network.
• Scan up to 7 slave drops
• Supports up to 248 words of scheduled output data and up to 250 words of scheduled input data
• Scans AutoMax remote I/O racks and heads
• Maintains diagnostic counters
Troubleshooting Specifications DCSLOG In the DCSLOG operating mode, the gateway connects to the AutoMax DCSNet network, listens to every value of each DCSNet register, looks for changes and then timestamps the values.
• Data logging with millisecond time stamps
• Does not occupy a drop on the network or affect existing network traffic
AMXCAPT In the AMXCAPT operating mode, data can be captured, stored and then analyzed on a Reliance AutoMax DCS or Remote I/O network. Examine the behavior of all drops, verify network data and timing, locate network errors and troubleshoot problems with the network and with the process.
• All network frames are captured and stored, with timestamps to microsecond precision
• Post-capture filtering process to select frames of interest for further analysis
• Typical capture file size is 2.5 mb/minute, 150 mb/hour, 3.6 gb /day General Specifications Web Access AN-X acts as a web server. Any web browser can connect to the AN-X to view diagnostics and current I/O data. A web browser can be used to configure the drop number and drop depth.
Hardware Specifications Specification Description
Ports 1 RJ45 10/100 Mbps Ethernet port 1 Phoenix 3-pin power connector 1 DB9 serial connector for the network connection
Typical Power Consumption
300 mA @ 12 Vdc or 150 mA @ 24 Vdc
Maximum Power Dissipation
3.6W
Operating Temp 32°F to 122°F (0 ºC to 50 ºC)
Storage Temperature
-40°F to 185°F (-40 ºC to 85 ºC)
Dimensions 107 mm x 126 mm x 34 mm (4.18 in x 4.97 in x 1.33 in) not including connectors
Humidity 5% to 95% RH, with no condensation Desktop use or DIN Rail Mountable
Ordering Information EtherNet/IP™ to Reliance AutoMax DCS or Remote I/O Gateway AN-X-AMX QTS Part numbers AN-X-DCSNET
AN-X-DCSLOG AN-X-AMXRIO
AN-X-AMXCAPT
How to Contact Us: Sales and Support Sales and Technical Support for this product are provided by ProSoft Technology. Contact our worldwide Sales or Technical Support teams directly by phone or email: Asia Pacific +603.7724.2080, [email protected] Europe – Middle East – Africa +33 (0) 5.34.36.87.20, [email protected] North America +1.661.716.5100, [email protected] Latin America (Sales only) +1.281.298.9109, [email protected]