ethernet access - comar · 2013-08-22 · e thernet is the most popularelectronic communications...

Ethernet is the most popular electronic communicationsmedium in the world. Because it offers a versatile, low-cost,standards-based interface, Ethernet has become ubiquitous

as the global technology-of-choice in industrial, enterprise, andcarrier networks.

For all its benefits, Ethernet does present some limitations:

• Cabling—Standard Ethernet, runs over Cat 5 cabling infrastruc-ture, the installation of which may be costly, and require (oftenmore costly) network downtime.

• Segmentation—To avoid bottlenecks that cause network con-gestion, latency or even data loss, Ethernet LANs musts be seg-mented, which increases network complexity, operational over-head, and cost.

• Distance—Perhaps the biggest drawback of Ethernet technologyis the standard distance limitation of 328 feet (100 meters). Inmany applications it is impractical or impossible to install net-work-enabled devices within 328 feet from the nearest computer,router, or switch.

Despite the above limitations, the number of Ethernet-based instal-lations continues to grow at an astounding rate.

Ethernet extension, which addresses the distance limitation of theEthernet standard, can be found in these generalized applications:

• M2M—Interconnecting Ethernet terminals and devices

• Ethernet access—connecting users and devices to acentral network

• Ethernet networking—interconnecting multiple users and servers

Patton’s CopperLink™ Ethernet Extenders appear in a wide variety ofenvironments, including business offices, mining tunnels, oil rigsand drills, manufacturing facilities, vehicular traffic management,security monitoring, maritime vessels, sporting arenas, nuclearpower facilities, agriculture, and more!

Patton offers the industry’s broadest range of products and solu-tions for leveraging existing copper or coaxial cabling infrastructureto extend Ethernet connections. CopperLink™ solutions can extendEthernet segments over distances up to and exceeding 5 miles(8 km). The CopperLink™ product line supports line rates rangingfrom 192 kbps to 168 Mbps, and offers symmetric or asymmetricprofiles. While most models operate over a single twisted pair,recently developed products deliver even greater bandwidth andlonger distances by bonding up to four twisted pairs (8 wires) intoa single Ethernet connection.

Perhaps best of all, Patton’s CopperLink™ Ethernet Extenders are easy-to-use, plug-and-play devices, so users can bypass complex andtedious network configuration requirements. CopperLink™ EthernetExtenders transparently pass all higher-layer protocols—including802.1Q VLAN frames (tagged and untagged) and IP video compres-sion schemes such as MPEG-4, H.264 and MJPEG.

Form FactorsDesktop

4 Typically 0 to 50 °C

4 New case can be wall mounted

4Controlled environment (not inthe elements)

Ruggedized

4Temperature ranges from -10 to70 °C, and from -40 to 85 °C

4 DIN or wall mountable

4Controlled environment (not inthe elements)

EnviroNET™

4Rated from -40 to 85 °C

4Pole or wall mountable

4Can be installed outdoors

CopperLink™

ModelMax.Speed

Distance atMax. Speed

Max.Distance

No. ofWires

LANPorts

MediaType

TransmissionType Page

2110 10/100Base-TX100 m (328 ft)per Model 2110

200 m656 ft 2 2Cat 5 or

greater N/A 6

2174168 Mbps

Downstream76 m250 ft

3 km(1.8 mi) 2 4

Twisted Pair,Coax

Symmetric,Asymmetric 7

2173100 Mbps

Downstream0.15 km500 ft

1.3 km(4,250 ft) 2 2Twisted Pair Asymmetric 8

CL1314 5.7 Mbps3.35 km

(11,000 ft)5.5 km(3.4 mi) 2 4Twisted Pair Symmetric 9

2151 15 Mbps1 km

(3,000 ft)1 km

(3,000 ft) 2 2Twisted Pair Asymmetric 9

2150 10 Mbps1.1 km

(3,750 ft)1.1 km

(3,750 ft) 2 2Twisted Pair Symmetric 10

2160 Series11.4 Mbps

per pair1.4 km

(4,600 ft)8.3 km(5.2 mi) 2 to 8 4

Twisted Pair(multiple) Symmetric 11

CL1314R 5.7 Mbps3.35 km

(11,000 ft)5.5 km(3.4 mi) 2 4Twisted Pair Symmetric 12

2173R100 Mbps

Downstream0.15 km500 ft

1.3 km(4,250 ft) 2 2Twisted Pair Asymmetric 12

2113A N/A N/A4.3 km(2.5 mi) 2 1Twisted Pair E1 13

2115 N/A N/A4.6 km(2.8 mi) 2 1Twisted Pair T1 13

CopperLink™ EnviroNET™ Ethernet Extender Solutions

FormFactor

Desktop

Desktop,Wall mountable

Desktop


Desktop

Desktop

Desktop

Ruggedized,DIN/Wall mount

Ruggedized,DIN/Wall mount


Desktop

14

Ethernet Connectivity (Machine-to-Machine)Connecting Ethernet terminals/devices4Connectivity is the linking of devices—M2M

4Today, many traditional RS-232 links are beingreplaced with Ethernet

Examples:

• Access Control and Card Reader Devices

• IP Cameras

• Traffic Control Signals

• Railway Communications

Ethernet Access (Person-to-Person)Connecting remote users to a central network4Access is connecting remote users and devices to a

central network

4Usually a few remote devices or users need networkaccess

Examples:

• Remote Utility Room

• Remote Control Room, Receiving Dock

• Caddy shack/Starters house

What CopperLink has to offer4Devices that extend Ethernet beyond its 100-meter (328-foot) natural limitations

4Products sold in pairs (local and remote), so everything you need for installationis in the box. (Boosters don’t work in pairs so they’re sold individually)

4Pass Ethernet over multiple forms of media, not just Cat 5. Using your existinginfrastructure decreases downtime and saves money.

4Transparent to higher-layer protocols and video schemes

4Ethernet bridge

4Plug-and-Play. Our Ethernet Extenders are so easy to use, they require no train-ing and minimal technical support.

Ethernet Networking (LAN-to-LAN)Connecting multiple users and servers4Networking is connecting multiple users on each side of

the connection to each other.

4An alternative to fiber or wireless while maintaining thelowest cost with copper

Examples:

• LAN extension to remote office

• High cpeed IP video delivery

• Campus building trunking

• Work groups

INFRASTRUCTURE EXTENSION PRODUCTSCOPPER ETHERNET EXTENDERS—ETHERNET BOOSTER

visit us onlinewww.patton.comFAST Delivery From Your AUTHORIZED DISTRIBUTOR!

6Ethernet ExtendersPRODUCT GUIDE

Ethernet BoosterModel 2110

The CopperLink™ 2110 solution more than doubles Ethernet and PoEdistances over already existing network infrastructure cabling.

F E A T U R E S & B E N E F I T S4 Ethernet & PoE Extension—Doubles

10/100Base-TX Ethernet and PoE to200 meters (656 feet). Multiple units can beused in series for even longer extensions.

4 Operates over Cat 5—Reduces the cost andhassles of adding switches, hubs, and wire-less access points.

4 Plug and Play—No configuration or cablehassles during installation with auto-sensing10/100, full or half duplex, andautomatic MDI-X.

4 Transparent LAN Operation—Transparentoperation ensures the highest rate possiblefor each extension distance.

4 No External Power Required—Power overEthernet (PoE) capability enables extendersand peripheral devices to be powered overstandard twisted-pair Ethernet cable.

802.3af Power and Distance ChartPower Delivered

Class of PoE Device

PoE Source

3rd PartyPoE switch

PoE Injector2110/PSE/EUI-48

N/A

300 m / 984 ft(1 x 2110/P)

Model

2110/P

2110/PSE + 2110/P

300 m / 984 ft(2 x 2110/P)

400 m / 1,310 ft(2 x 2110/P)

400 m / 1,310 ft(3 x 2110/P)

500 m / 1,640 ft(3 x 2110/P)

500 m / 1,640 ft(4 x 2110/P)

600 m / 1,969 ft(4 x 2110/P)

Maximum Distance (Quantity of Units)

13WClass 3/0

6.5W Class 2

3.84WClass 1

0WNo PoE Load

O R D E R I N G I N F O R M A T I O N2110/EUI: CopperLink 10/100 Mbps Ethernet Booster;100–240 VAC

2110/P: CopperLink 10/100 Mbps Ethernet Booster; 802.3afpass through

2110/PSE/EUI-48: CopperLink 10/100 Mbps Ethernet Booster and802.3af PoE Injector; 48 VDC Source

The CopperLink™ Model 2110 doubles Ethernetdistance limitations of 328 feet (100 meters).Multiple Model 2110 Ethernet Boosters can beplaced in-line to further extend both Ethernetand PoE up to 1,640 ft (500 m), eliminating theneed for additional switches, hubs, wirelessaccess points, and expensive fiber installations.The Model 2110 is completely transparent toprotocol making them true plug-and-play

devices, completely interoperable with any net-work enabled device. The Model 2110 will notcause latency or degradation on your networkconnections, ensuring the maximum 100-Mbpsfull-duplex line rate. The Model 2110/P and2110/PSE not only transparently pass onEthernet data, but also feed on and forward PoEpower to devices such as wireless access points,IP cameras, and VoIP phones.

Typical ApplicationsThe CopperLInk Ethernet Booster is ideal fordelivering Ethernet to remote network enableddevices located outside Ethernet’s limited range

of 328 feet (100 meters). Several configurationsare possible based on individual requirements.

INFRASTRUCTURE EXTENSION PRODUCTSCOPPER ETHERNET EXTENDERS—DESKTOP UNITS

168 Mbps Symmetrical Over Twisted-pair, Cat 5e/6/7or Coaxial Cable Ethernet ExtenderCopperLink™ 2174

Achieving symmetrical line rates greater than 168 Mbps over singletwisted-pair, Cat 5e/6/7 or coaxial cable, Patton’s CopperLink™

Model 2174 Ethernet Extender is the fastest CopperLink™ ever.

F E A T U R E S & B E N E F I T S4 Ethernet Extension—Extend 10/100Base-TX

Ethernet well beyond its 328-foot (100-meter) limitation over a single unshieldedtwisted pair (UTP), Cat 5e/6/7, or even coax-ial cable.

4 Operates Over Twisted Pair—Realize fiber-optic speeds without the expense—andhassle—of installing new cables or line-of-site wireless circuits.

4 Plug and Play—Set these units up straightout of the box. No configuration is required.Auto-sensing 10/100 Ethernet ports supportfull or half-duplex operation.

4Multiple Line Rates Supported—Switch-selectable rate mode options optimize rateand reach for the noise environment, wiregauge/type and length.

4 Transparent LAN Bridging—Bypass networkconfiguration requirements by transparentlypassing all higher layer protocols—including802.1Q VLAN frames (tagged and untagged).Data-transmission mechanism is fully trans-parent to such IP video compression schemesas MPEG-4, H.264 and MJPEG.

visit us onlinewww.patton.com FAST Delivery From Your AUTHORIZED DISTRIBUTOR!


Perfect for bandwidth-intensive applications theModel 2174 delivers off-the-chart symmetricalline rates greater than 168 Mbps. Best of all—like all CopperLink™ products—the Model 2174leverages existing copper infrastructure to deliv-er high speed Ethernet connectivity over singletwisted-pair, Cat 5e/6/7 and—new to theCopperLink™ line—coaxial cabling.

Four user-selectable configuration profiles—combined with Patton’s auto-rate adaptation fea-ture—ensure maximum achievable symmetricalor asymmetrical rates for the installed noiseenvironment, wire gauge/type and length.

Symmetrical line-rate settings are ideal for suchapplications as remote LAN extension, videoteleconferencing, and data backhaul.

Asymmetrical configurations are well-suited forapplications requiring higher downstreamspeeds and/or longer distances between Ethernetdevices. Typical asymmetrical scenarios includemedical imaging, livestock monitoring, underwa-ter video, internet gaming, and transporting high-resolution IP video from security cameras.

Realize fiber-like speed and distance without theexpense of fiber with Patton’s ultra-high-speedCopperLink Ethernet Extenders.

A built-in, 4-port Ethernet switch makes theCopperLink Model 2174 ideal for delivering mul-tiple IP information streams over a single cable.For example, at a guardhouse or security kiosk,you could aggregate IP data from a laptop, amotion sensor, and two high resolution IP videocameras for simultaneous transmission over asingle Ethernet connection.

Combining data flows from up to four network-enabled devices onto a single twisted pair orcoax cable, the Model 2174 can deliver IP trafficup to 1.8 miles (3 km) away—well beyond the

standard 328-foot (100-meter) Ethernet dis-tance limitation.

With achievable line rates up to 168 Mbps, theCopperLink 2174 eliminates the bandwidth con-straints commonly experienced with other cop-per-based transmission technologies. The Model2174 is engineered to re-use existing infrastruc-ture previously employed in legacy applicationsincluding alarm circuits, E1/T1 circuits, RS-232,RS-422, RS-485, CCTV and CATV. Many newercabling standards are also supported, includingCat 5e, Cat 6 and Cat 7.

O R D E R I N G I N F O R M A T I O N2174/BNC/EUI-2PK: CopperLink High Speed Ethernet Kit; BNC;100–240 VAC

2174/EUI-2PK: CopperLink High Speed Ethernet Kit; `RJ-45;100–240 VAC

2174/TB/EUI-2PK: CopperLink High Speed Ethernet Kit; TerminalBlock; 100–240 VAC

Rate and Reach: Long Range Symmetrical

250 (76 m)1000 (305 m)2000 (610 m)3000 (914 m)5000 (1.5 km)10,000 (3 km)

68625033162.5

504416421

Lengthfeet (m/km)

Mbps

Application Example

Downstream Upstream

Rate and Reach: High Speed Asymmetrical

250 (76m)1000 (305m)2000 (610m)3000 (914m)3500 (1km)

168126604235

95542161

Lengthfeet (m/km)

MbpsDownstream Upstream

INFRASTRUCTURE EXTENSIONCOPPER ETHERNET EXTENDERS—DESKTOP UNITS



Application Example

O R D E R I N G I N F O R M A T I O N2173/EUI: CopperLink High Speed Ethernet Extender; RJ-45 Line;100–240 VAC

2173/EUI-2PK: CopperLink High Speed Ethernet Extender Kit(1 Local and 1 Remote); RJ-45 Line; 100–240 VAC

70 Mbps Symmetrical or 100 Mbps AsymmetricalEthernet ExtenderCopperLink™ 2173

With achievable lines rates of 70 Mbps symmetrical, or 100 Mbpsasymmetrical over a single twisted-pair, the Model 2173 is one of thefastest in the large line of CopperLink™ Ethernet extenders.

F E A T U R E S & B E N E F I T S4 Ethernet Extension—Extends 10/100Base-

TX Ethernet up to 4,250 feet over 2-wire 24AWG twisted pair.

4 Operates Over Twisted Pair—Near fiberspeeds without the cost of new cable orfiber installations or the hassles of wirelessline of site.

4 Plug and Play—Modems need no configu-ration to operate, Ethernet ports are auto-sensing 10/100, full or half duplex.

4 Multiple Line Rates Supported—Switch-selectable line rates ensure best possiblerate vs. reach combination.

4 Transparent LAN Bridging—No networkconfiguration. Will pass higher layer proto-cols, including 802.1Q VLAN tagged anduntagged packets. Fully transparent to vari-ous UP video compression schemes such asWMV, MPEG-4 and MJPEG.

The CopperLink™ Model 2173 High Speed

Ethernet Extender leverages existing copper infra-

structure to deliver high speed Ethernet extension.

Multiple user-selectable settings for symmetrical

and asymmetrical rates provide the flexibility

required to achieve the optimal speed-distance

combination for each and every connection.

Multi-rate symmetrical line rates allow each con-

nection to be tuned for the length and gauge of

the copper wire, in order to achieve the maxi-

mum possible data rate for the environment.

Typical symmetrical applications include remoteLAN extension, video teleconferencing, and databackhaul. Asymmetrical line rates are the idealsolution for applications that require longerextension between their Ethernet devices and forapplications that primarily involve high down-stream requirements. These asymmetrical appli-cations include high resolution IP video for secu-rity, medical imaging, livestock monitoring,underwater video, and internet gaming.

Get near-fiber performance without theexpense with Patton’s High Speed CopperLinkEthernet Extenders.

IP securitycamera

IP securitykey pad

2 x 10/100Base-Tports

Guard house

2173

2173

Model 2173 dual-port CopperLink EthernetExtenders are ideal for delivering high speed IPvideo and data links to remote devices that arebeyond the 328 foot (100 meter) distance limit ofEthernet. The high throughput eliminates band-width concerns previously experienced withmany other copper based transmission technolo-gies. By utilizing existing voice grade copperpairs, the expense and hassle of installing lowcapacitance or fiber cabling is no longer required.

Depicted below is a typical application involvingmultiple network enabled devices (Ethernet)plugged in for simultaneous Ethernet data andIP video delivery.

Note: Actual distance and link performance dependson the environment and type/gauge of wire used.

Distance ChartDistance ChartBasedBased onon 2424 AWGAWG (0.5 mm)(0.5 mm)

4/1100/7025/2550/5070/70

Line Rate

5,500 ft (1.6 km)500 ft (0.15 km)2,250 ft (0.6 km)1,750 ft (0.5 km)1,750 ft (0.5 km)

Distance in feet (km)





F E A T U R E S & B E N E F I T S4 Ethernet Extension—Extends 10/100 Base-

TX Ethernet distances 1 mile using 2-wire24 AWG unconditioned lines

4 Seamlessly Connect and Extend the LAN—802.3 10/100Base-TX LAN connection viabuilt-in shielded RJ-45 port

4 CopperLink 2-Wire Connection—Easy 2-wire connection via built-in RJ-45 port orterminal block

4 Switch Selectable—Asymmetrical orSymmetrical line rates up to 15 Mbps!

4 Dual Auto-sensing Ethernet—Auto 10 or100Base-T and full or half-duplex Ethernetoperation

F E A T U R E S & B E N E F I T S4 Auto-rate Selection—Just plug the units in,

and they will determine the maximum ratepossible for the connection. Rates are alsouser configurable.

4 CopperLink 2-Wire Connection—Easy 2-wire CopperLink connection via built-in RJ-11 port.

4 Built-in 4-port Ethernet Switch—4 x auto10 or 100Base-T and full or half-duplexEthernet operational for direct connection offour Ethernet devices.

4 Transparent LAN Bridging—Passes higherlayer protocols and supports 802.1QVLAN tagging

15 Mbps Multi-Rate CopperLink™ Ethernet ExtenderModel 2151

Multi-rate high speed Ethernet extension over voice–grade wire.

Variable symmetric or asymmetric data ratesLine rates can be set on the standalones and rack cards to differentiateservices and increase the distance of the individual links.

5.7 Mbps High Speed Ethernet Extender with Auto-Rate AdaptationCopperLink™ 1314

Reach your remote LAN with Patton’s Auto-Rate EthernetExtender and get the best speed/distance combination in theindustry using just a single twisted-pair.

Patton’s CopperLink Auto-Rate Ethernet Extender is the perfect fit for simple, cost-effective highspeed Ethernet extension. It enables customers to take advantage of existing copper infrastructure

O R D E R I N G I N F O R M A T I O N2151/EUI: CopperLink 15 Mbps Ethernet Extender; RJ-45 Line;100–240 VAC

2151/EUI-2PK: CopperLink 15 Mbps Ethernet Extender ExtenderKit; RJ-45 Line; 100–240 VAC

O R D E R I N G I N F O R M A T I O NCL1314/EUI-2PK: CopperLink Long Range Ethernet Extender Kit;100–240 VAC


3.4 miles (5.48 km)

2.3 miles (3.65 km)

2 miles (3.35 km)

192 kbps

2304 kbps

5696 kbps

Application Example—Corporate Campus LAN Extension

TwistedPair

Model CL1314

Model CL1314

Model CL1314

Model CL1314

Twisted Pair

to connect remote LANs across dis-tances and at speeds previouslyunthought-of. The auto-rate featureensures the highest speed is achievedon each connection, and the plug ‘n’play operation ensures they are up andrunning in seconds. Add in the auto-sensing full/half duplex 10/100Base-TEthernet port and the integratedcrossover switch to make setup eveneasier, and the value of this Ethernetextender can’t be beat!


Distance Chart, Based on 24 AWG (0.5 mm)Distance Chart, Based on 24 AWG (0.5 mm)

4/19/116/2

Line Rate

Line Rate

5,500 ft (1.6 km)5,750 ft (1.7 km)4,700 ft (1.4 km)

Distance in feet (km)6/6

10/1015/15

Line Rate5,500 ft (1.6 km)5,000 ft (1.5 km)4,250 ft (1.2 km)





F E A T U R E S & B E N E F I T S4 Long-reach High Speed Ethernet

Extension—Overcome the 328 ft (100 m)limitation of Ethernet with a full-duplex10 Mbps link at distances up to3,750 ft (1.1 km)

4 Seamlessly Connect and Extend the LAN—802.3 10/100Base-T LAN connection viabuilt-in shielded RJ-45 port

4 CopperLink 2-Wire Connection—Easy 2-wire CopperLink connection via built-in RJ-45 port or optional terminal block

4 Dual Auto-sensing Full-Duplex Ethernet—Auto 10 or 100Base-T and full or half-duplexEthernet operation


4 Automatic Learning, Aging, andFiltering—Only allows packets withaddresses outside the LAN to be forwarded

10 Mbps Multi-Rate Ethernet ExtenderCopperLink™ 2150

Overcome the distance limitations of Ethernet with the Patton Model2150 CopperLink™ Ethernet Extender. Using a single twisted-pair of voice-grade wire, transparently extend the reach of your net-work to over 3,750 ft (1.1 km) at 10 Mbps symmetric.

These multi-rate Ethernet Extenders are ideal for bridging Ethernet spans inside buildings that arebeyond the 328-foot (100-meter) distance limit of Ethernet.

For example, connecting remote LANs located on different floors in a building over already existingtelephone-grade twisted pair.



10/1010/1010/1010/10

Line Rate

4,500 ft (1.3 km)4,500 ft (1.3 km)4,750 ft (1.4 km)5,000 ft (1.5 km)


O R D E R I N G I N F O R M A T I O N2150/EUI: CopperLink 10 Mbps Ethernet Extender; RJ-45 Line;100–240 VAC

2150/EUI-2PK: CopperLink 10 Mbps Ethernet Extender Kit (1 LocalUnit and 1 Remote Unit); RJ-45 Line; 100–240 VAC

Linerate

Linerate

24 AWG(0.5 mm)

24 AWG(0.5 mm)




O R D E R I N G I N F O R M A T I O N

2160/EUI-2PK: CopperLink High Speed, Long Range EthernetExtender Kit (1 pair), 5.7 Mbps; 100–240 VAC2161/EUI-2PK: CopperLink High Speed, Long Range EthernetExtender Kit (2 pair), 11.4 Mbps; 100–240 VAC2162/EUI-2PK: CopperLink High Speed, Long Range EthernetExtender Kit (4 pair), 22.8 Mbps; 100–240 VAC

45 Mbps Long Range Ethernet ExtenderCopperLink™ 2160 Series

With rates up to 45 Mbps and reach up to 24,000 feet(7,315 meters), the Patton Model 2160 is the most versatileEthernet Extender offered today.

F E A T U R E S & B E N E F I T S4 Line Rates up to 45 Mbps—Get reliable

broadband connectivity with full-duplexsymmetric rates and distances exceeding4.5 miles (7,300m)

4 4 x 10/100 Ethernet Switch—Make up to 4network connections easily. Built in MDI-Xauto cross over switches eliminates messyand confusing cable configurations.


4 Automatic Learning, Aging and Filtering—Only allows packets with addresses outsidethe LAN to be forwarded.

4 QoS, CoS, and VLAN Support—Ensure mis-sion critical network connections are oftop quality with advanced traffic manage-ment features.

4WWW/SNMP Manageable—Built-in consoleport makes setup a snap, you can also usethe embedded HTTP/SNMP agent to remotemanage the unit from anywhere in the world.

Twisted Pair x 24 Mbps @ 3.2miles (5.2 km)

The Auto-rate feature ensuresthat the best combination of

speed and distance is achievedfor each LAN extension

Model 2162Model 2162

Model 2161

Model 2161

Twisted Pair x 445 Mbps @ 0.6 miles

(0.9 km)

2-Wire Standard

miles

5.24.2

3.8

3.53.2

2.0

km

8.36.7

6.2

5.65.2

3.3

kbps

192512

1024

15362048

5696

kbps

3841024

2048

30724096

11392

miles

2.01.6

1.4

1.31.2

0.9

km

3.22.6

2.3

2.12.0

1.4

2-Wire High Speed

The Patton CopperLink Model 2160 Series simplifies and provides cost effective network extensionby utilizing pre-existing twisted pair infrastructure. Patton’s Model 2160 series of auto-rate EthernetExtenders open the door to low-cost and easy set-up LAN extension.

There are three models available in the 2160 series, including the flagship Model 2162 that utilizes1 to 4 pair of voice grade wires enabling maximum transmission speeds of 22.8 Mbps at a distanceof 1.6 miles (2.6 km). Also available is the Model 2161 (4 wire)—11.4 at 1.6 miles (2.6 km), and theModel 2160—5.7 Mbps at 1.6 miles (2.6 km). Maximum distance achieved with all CopperLink 2160models is 4.1 miles (6.6 km).

Distance Chart, 2160 SeriesDistance Chart, 2160 Series

Linerate

Linerate

24 AWG(0.5 mm)

24 AWG(0.5 mm)

2-Wire Standard

miles

5.24.2

3.8

3.53.2

2.0

km

8.36.7

6.2

5.65.2

3.3

kbps

3841024

2048

30724096

11392

kbps

7682048

4096

61448192

22784

miles

2.01.6

1.4

1.31.2

0.9

km

3.22.6

2.3

2.12.0

1.4

2-Wire High SpeedDistance Chart 2161 SeriesDistance Chart 2161 Series

Linerate

Linerate

24 AWG(0.5 mm)

24 AWG(0.5 mm)

2-Wire Standard

miles

5.24.2

3.8

3.53.2

2.0

km

8.36.7

6.2

5.65.2

3.3

kbps

7682048

4096

61448192

22784

kbps

15364096

8192

1228816384

45568

miles

2.01.6

1.4

1.31.2

0.9

km

3.22.6

2.3

2.12.0

1.4

2-Wire High SpeedDistance Chart 2162 SeriesDistance Chart 2162 Series

5.7 Mbps DIN Rail Mountable Ethernet ExtenderCopperLink™ 1314R

Reach your remote LAN with Patton’s Auto-RateEthernet Extender and get the best speed/distancecombination in the industry using just a singletwisted-pair.

Let the Patton Model 1314R simplify network extension by using twisted-pairinfrastructure previously used for such legacy systems as TTL, RS-232 andRS-422/485 to be used for extending or connecting Ethernet devices together.

A pair of 1314Rs or a 1314R combined with a 1314 desktop unit can extend network connections upto 18,000 ft (5.48 km).

visit us onlinewww.patton.com

INFRASTRUCTURE EXTENSIONETHERNET EXTENDERS—HARDENED OUTDOOR UNITS

Ethernet ExtendersPRODUCT GUIDE

12

FAST Delivery From Your AUTHORIZED DISTRIBUTOR!

CopperLink™ Wall Mounted Ethernet ExtendersMax. Distance Max. Speed Distance at Max. Speed Model1 mile (1.6 km) 50 Mbps 800 feet (243.9 m) CopperLink™ 2173R

5.7 miles (9.2 km) 4.6 Mbps 2.0 miles (3.2 km) CopperLink™ 1314R

Temperature Range-10 to 70°C

1 mile (1.6 km) 50 Mbps 800 feet (243.9 m) CopperLink™ 2173R/CC-40 to 85°C

-40 to 85°C

O R D E R I N G I N F O R M A T I O N2173R/EUI: Ruggedized CopperLink High Speed 50 MbpsCopperLink Ethernet Extender; -10 to 70°C; RJ-45 Line; External100–240 VAC Adapter

2173R/EUI-2PK: Ruggedized CopperLink High Speed 50 MbpsCopperLink Ethernet Extender Kit; -10 to 70°C; RJ-45 Line;External 100–240 VAC Adapter

2173R/CC/EUI: Conformal Coated and Ruggedized CopperLink HighSpeed 50 Mbps Ethernet Extender; -40 to 85°C; RJ-45 Line; 100–240 VAC

50 Mbps Wall Mountable Ethernet ExtenderCopperLink™ 2173R

Patton’s CopperLink 2173R extends Ethernet connections at distancesup to 5,500 feet (1,676 meters) over already existing infrastructurecabling. It reduces the cost and hassles of new installations, utilizinginstalled voice-grade twisted pairs to eliminate the expense of fiber orCat5e cabling.

F E A T U R E S & B E N E F I T S4 Full-duplex data-line rate of 100 Mbps—

Provides near fiber performance for band-width intensive applications such as TriplePlay services.

4 Plug and Play—No configuration or cablehassles during installation with auto-sensing10/100, full or half duplex, and auto MDI-X.

4 Flexible installation—Wall mount readyand optional DIN rail kit

4 Extended temperature—From -40 to 85°C

Model 2173R Distance ChartBased on 24 AWG (0.5 mm)

4/1

100/70

25/25

50/50

70/70

5,500 ft (1.6 km)

250 ft (0.07 km)

2,250 ft (0.6 km)

1,750 ft (0.5 km)

1,750 ft (0.5 km)

Line Rate Distance

F E A T U R E S & B E N E F I T S4 High Speed Extension—With the Model

CL1314R you get speeds up to 5.7 Mbps.

4 Auto-rate Selection—Just plug the units in,and they will determine the maximum ratepossible for the connection. Rates are alsouser configurable.

4 CopperLink 2-Wire Connection—Easy 2-wire CopperLink connection via built-in RJ-11 port.

4 Built-in 4-port Ethernet Switch—4 x auto10 or 100Base-T and full or half-duplexEthernet operational for direct connection offour Ethernet devices.


4 Automatic Learning, Aging, andFiltering—Only allows packets withaddresses outside the LAN to be forwardedO R D E R I N G I N F O R M A T I O N

Call for details.



3.4 miles (5.48 km)

2.3 miles (3.65 km)

2 miles (3.35 km)

192 kbps

2304 kbps

5696 kbps

Line Rate


INFRASTRUCTURE EXTENSIONCOPPER T1/E1 ETHERNET EXTENDERS


T1 ExtenderCopperLink™-T 2115

The CopperLink™-T 2115 is a transparent, plug-and-play T1 Extenderthat solves the distance and wire limitations of TDM technologyby tripling the reach to over 3 miles over a single pair of wires.

F E A T U R E S & B E N E F I T S4 Voice and Data Extension—The T1/E1

Extenders operate in clear channel modeallowing the transparent passing of bothvoice and data.

4 Plug and Play—Plug them in and the linkcomes up in seconds. The line interface iseven polarity insensitive, making it easier toget running.

4 Line Tests—V.52 511/511E PatternGenerator with Remote Digital Loopback(RDL); Local Analog Loopback (LAL).

Large PBX

Up to 18,500 ft/5,600 m(T1) over voice-grade

twisted-pair

Model2115

Model2115

Main Office

Branch Office

PBX

E1 ExtenderCopperLink™ 2113A

The CopperLink™ 2113A is a transparent, plug-and-play E1Extender that solves the distance and wire limitations of TDM tech-nology by tripling the reach and halving the number of requiredwire pairs.

With the CopperLink™ 2113A extender, zero configuration is required. They operate in clear-channelmode, thereby facilitating the transparent extension of data and voice bearing circuits. The two activepins on the RJ connector are polarity insensitive, so you don’t even need to worry about which wireyou connect on the line interface. Simply take them out of the box, put them on either side of the drycopper pair, connect your E1 device and the circuit will light up immediately!

The Model 2113A extends E1 circuits to 16,100 feet (4,900 meters, nearly 5 km). The 2113A requiresonly two wires (one pair) to extend the TDM circuits, thereby conserving and minimizing the copperplant resources used.

F E A T U R E S & B E N E F I T S4 Triple the Distance—Extend E1s to nearly

5 km over one pair of wires.

4 Half the Wires—The E1 extender only needsone pair of wires to operate.

4 Voice and Data Extension—The E1Extender operates in clear channel modeallowing the transparent passing of voiceand data.

4 Plug and Play—Plug the 2113A in and thelink comes up in seconds. The line interfaceis even polarity insensitive, making it easierto get running.

4 Line Tests—V.52 511/511E PatternGenerator with Remote Digital Loopback(RDL); Local Analog Loopback (LAL).

4 Front Panel Status Indicators—Front panelLEDs provide users with quick feedback onunit operation.

Cell towerfacility Up to 16,100 ft/4,900 m

(E1) over voice-gradetwisted-pair

Model2113A

Model2113A

Main Office

CopperLink™-T T1/E1 Ethernet ExtendersDistance at 24 AWG Model2.8 miles (4.6 km) CopperLink™-T 2115

2.5 miles (4.0 km) CopperLink™-T 2113A

Signaling StandardT1

E1

O R D E R I N G I N F O R M A T I O N2115/EUI-2PK: CopperLink T1 Extender Kit; 100–240 VAC

2113A/EUI-2PK: CopperLink E1 Extender Kit; 100–240 VAC


INFRASTRUCTURE EXTENSIONETHERNET EXTENDERS—HARDENED OUTDOOR UNITS


CopperLink™ EnviroNET™ Ethernet Extender Solutions

EnviroNET™ Ethernet Extenders provide transparent extension of your10/100 Ethernet LANs at distances up to 8 km over a single twisted pair orline rates over 100 Mbps!

EnviroNET™ Ethernet Extenders are housed in protective enclosures andoperate in extreme temperatures, ranging from -40 to 85°C. Each EnviroNETextender is customized to your requirements. So whether you are looking for

protection from vandalism or extending Ethernet to locations where harshenvironmental elements such as heating, cooling, dust, and moisture cannotbe controlled, there is an EnviroNET solution that is right for you.

EnviroNET™ Ethernet Extender applications include closets, ceilings,industrial automation, roadside cabinets, and various outdoor installationssuch as security and transportation access/control/surveillance.

• Each EnviroNET product is customized to your requirements

• Various NEMA, IP (ingress protection), and MIL-SPEC optionsare available

Contact: [email protected] for details.

Sample solutions

07METHEXT-PG2

ethernet access - comar · 2013-08-22 · e thernet is the most popularelectronic communications...

Documents