eternus configuration guide

7/24/2019 ETERNUS Configuration Guide

1/42

ETERNUS

[Specification]

(1) ETERNUS DX60 S2 1(2) ETERNUS DX80 S2 2

(3) ETERNUS DX90 S2 3(4) Supported RAID 4

[Outline]

(1) View 5(2) Product Diagrams 7

[System configuration tree diagram]

(1) ETERNUS DX60 S2 (Dual-controller type) 9(2) ETERNUS DX60 S2 (Single-controller type) 11(3) ETERNUS DX80 S2 (Dual-controller type) 14(4) ETERNUS DX80 S2 (Single-controller type) 17(5) ETERNUS DX90 S2 (Dual-controller type) 20(6) ETERNUS DX90 S2 (Single-controller type) 23

(7) Options 26(8) Cables 39(9) Rack 40

(10) ETERNUS Multipath Driver 41

Product ID/Descriptions Meaning of each circle ()Each product has "Product Description", "ProductID" => Only one selection can be madeand "Brief Remarks" as follows. =>Multiple selections are possible.

(There may be some restriction)Ex) Product name

Drive enclosure

- Rackmount type 2U

ETLDE2AU

Product ID Brief Remarks

Copyright 2013 FUJITSU LIMITED

System Configuration Guide February 2013, 6th editionCONTENTS

ETERNUS DX 60 S2, DX80 S2, DX90 S2 Disk Storage Systems

Se

lectonly

Con

current

connections

perm

itted


2/42

SINGLE

CONTROLLER

DUAL

CONTROLLER

SINGLE

CONTROLLER

DUAL

CONTROLLER

Physical capacity *2

Logical capacity *3

1 2 1 2

2 4 2 4

1GB 2GB 1GB 2GB

Capacity (rotation speed)

Drive interface


Drive interface

Capacity

Drive interfaceCapacity (rotation speed)

Drive interface


Drive interface

Capacity

Drive interface

Controller Enclosure

Drive Enclosure


Drive Enclosure

Voltage

Phase

Frequency


Drive Enclosure


Drive Enclosure

Temperature

Humidity

*1: Storage capacity depends on which HDDs are mounted.

*2: The physical capacity value was calculated as 1 KByte = 1,000 Bytes.

*3: The logical capacity value was calculated as 1 KByte = 1,024 Bytes when formatted as RAID5.

User area capacity differs depending on the environment.

ETERNUS DX60 S2, DX80 S2, DX90 S2

Number of controllers

Host Interfaces

Fibre Channel (Max. 4Gbit/s)

iSCSI (Max. 1Gbit/s)

SAS (Max. 3Gbit/s)

Number of host interfaces

Number of connectable hosts 32, 64 (2, 4 for SAS connection)

(1) ETERNUS DX60 S2 Speci fic ation

Product name ETERNUS DX60 S2

2.5" MODEL 3.5" MODEL

Supported RAID levels 0, 1, 1+0, 5, 5+0, 6

Storage Capacity *1 Max. 24.0TB Max. 72.0TB

Max. 17.8TB Max. 53.4TB

Cache memory capacity

Number of drives 2 - 24

Disk Drives

3.5"

SAS disk drive

3.5" nearline

SAS disk drive

3.5" SSD -

-2.5"

SAS disk drive

2.5" SSD -

-

-

-

-

-

900GB, 600GB,450GB,300GB(10,000rpm)

SAS (Max. 3Gbit/s)

600GB, 450GB, 300GB (15,000rpm)

SAS (Max. 3Gbit/s)

3TB, 2TB, 1TB (7,200rpm)

SAS (Max. 3Gbit/s)

-

35 kg

Power

AC 100 - 120 V / AC 200 - 240 V

Single

50 Hz / 60 Hz

Dimensions (W x D x H)- 483 650 88 mm (2U)

Maximum W eight

(per one Enclosure) - 35 kg

-

Environmental Conditions 10 - 40 C (Operating), 0 - 50 C (Non-operating)

20 - 80 %RH (Operating), 8 - 80 %RH (Non-operating)

483 650 88 mm (2U) 483 650 88 mm (2U)

35 kg

440W (450VA) [1,590kJ/h]

370W (380VA) [1,340kJ/h]

430W (440VA) [1,550kJ/h]

- 370W (380VA) [1,340kJ/h]

2.5" nearline

SAS disk drive

-

-

1TB (7,200rpm)

SAS (Max. 3Gbit/s)

Maximum Power

Consumption

[Maximum Heat

Generation]

AC100-120V

AC200-240V

510W (520VA) [1,840kJ/h]

-

500W (510VA) [1,800kJ/h]

1


3/42


SINGLE

CONTROLLER

DUAL

CONTROLLER

SINGLE

CONTROLLER

DUAL

CONTROLLER


Logical capacity *4

1 2 1 2

2 / 4 4 / 8 2 / 4 4 / 8

2GB 4GB 2GB 4GB


Drive interface

Capacity (rotation speed)Drive interface

Capacity

Drive interface


Drive interface


Drive interface

Capacity

Drive interface


Drive Enclosure


Drive Enclosure

Voltage

Phase

Frequency


Drive Enclosure

Maximum configuration


Drive Enclosure


Temperature

Humidity

*1: 2.5" base unit items are based on configuration with 2.5" drive enclosures only.


*3: The physical capacity value was calculated as 1 KByte = 1,000 Bytes.*4: The logical capacity value was calculated as 1 KByte = 1,024 Bytes when formatted as RAID5.

User area capacity differs depending on the environment.

*5: Mixtures of 2.5" and 3.5" drives are supported by adding both 2.5" and 3.5" drive enclosures.

800GB, 400GB, 200GB, 100GB

Single

50 Hz / 60 Hz

AC 100 - 120 V / AC 200 - 240 V

35 kg 35 kg

Dimensions (W x D x H)

10 40 C (Operating), 0 - 50 C (Non-operating)

20 - 80 %RH (Operating), 8 - 80 %RH (Non-operating)

2-120

Environmental Conditions

600GB, 450GB, 300GB (15,000rpm)

Power

2.5"

SAS disk drive

Disk Drives

3.5" SSD

3.5"

SAS disk drive

2.5" SSD

SAS (Max. 6Gbit/s)

Number of drives

SAS (Max. 6Gbit/s)

SAS (Max. 6Gbit/s)

3.5" nearlineSAS disk drive

482 645 88 mm (2U) 482 670 88 mm (2U)

482 540 88 mm (2U) 482 555 88 mm (2U)

Host Interfaces

900GB, 600GB,450GB,300GB(10,000rpm)

SAS (Max. 6Gbit/s)


2.5" MODEL *1

800GB, 400GB, 200GB, 100GB

SAS (Max. 6Gbit/s)

3TB, 2TB, 1TB (7,200rpm)

3.5" MODEL

Number of connectable hosts

ETERNUS DX80 S2

Supported RAID levels

Maximum

Power

Consumption

[Maximum

Heat

Generation]

AC100 - 120V

AC200 - 240V

630W (640VA) [2,300kJ/h]

570W (580VA) [2,100kJ/h]

620W (630VA) [2,300kJ/h]

550W (560VA) [2,000kJ/h]

5,570W (5,670VA) [20,300kJ/h]

630W (640VA) [2,300kJ/h] 610W (620VA) [2,200kJ/h]

570W (580VA) [2,100kJ/h] 550W (560VA) [2,000kJ/h]

5,560W (5,660VA) [20,200kJ/h]

Maximum W eight

(per one Enclosure) 35 kg 35 kg

Storage Capacity *2


Max. 1,024


SAS (Max. 6Gbit/s)

FCoE (Max. 10Gbit/s)

2.5" nearline

SAS disk drive

1TB (7,200rpm)

SAS (Max. 6Gbit/s)


0, 1, 1+0, 5, 5+0, 6




Product name

Max. 360.0TB

Max. 267.0TB

2


4/42


SINGLE

CONTROLLER

DUAL

CONTROLLER

SINGLE

CONTROLLER

DUAL

CONTROLLER


Logical capacity *4 1 2 1 2

2 / 4 4 / 8 2 / 4 4 / 8

4GB 8GB 4GB 8GB


Drive interface


Drive interfaceCapacity

Drive interface


Drive interface


Drive interface

Capacity

Drive interface


Drive Enclosure


Drive Enclosure

VoltagePhase

Frequency


Drive Enclosure



Drive Enclosure


Temperature

Humidity

*1: 2.5" base unit items are based on configuration with 2.5" drive enclosures only.


*3: The physical capacity value was calculated as 1 KByte = 1,000 Bytes.

*4: The logical capacity value was calculated as 1 KByte = 1,024 Bytes when formatted as RAID5.User area capacity differs depending on the environment.

*5: Mixtures of 2.5" and 3.5" drives are supported by adding both 2.5" and 3.5" drive enclosures.

50 Hz / 60 Hz

SAS (Max. 6Gbit/s)

900GB, 600GB,450GB,300GB(10,000rpm)

SAS (Max. 6Gbit/s)

482 555 88 mm(2U)

2.5"

SAS disk drive

3.5" SSD

Power

Dimensions (W x D x H)

2.5" SSDSAS (Max. 6Gbit/s)

AC 100 - 120 V / AC 200 - 240 V

Single

35 kg

35 kg 35 kg

Maximum W eight

(per one Enclosure)

35 kg

482 645 88 mm(2U)

482 540 88 mm(2U)

482 670 88 mm(2U)

Disk Drives

3.5"

SAS disk drive

2.5" nearline

SAS disk drive

600GB, 450GB, 300GB (15,000rpm)


Number of connectable hosts

SAS (Max. 6Gbit/s)

2.5" MODEL *1 3.5" MODEL


ETERNUS DX90 S2

Max. 360.0TB

Max. 267.0TB





Host Interfaces

Max. 1,024


SAS (Max. 6Gbit/s)

FCoE (Max. 10Gbit/s)

Storage Capacity *2

0, 1, 1+0, 5, 5+0, 6Supported RAID levels

Product name

800GB, 400GB, 200GB, 100GB

Environmental Conditions20 - 80 %RH (Operating), 8 - 80 %RH (Non-operating)

2-240 2-120

10 - 40 C (Operating), 0 - 50 C (Non-operating)

Maximum

Power

Consumption

[Maximum

Heat

Generation]

AC100 - 120V

630W (640VA) [2,300kJ/h] 620W (630VA) [2,300kJ/h]

570W (580VA) [2,100kJ/h] 550W (560VA) [2,000kJ/h]

5,760W (5,860VA) [21,200kJ/h]

AC200 - 240V

630W (640VA) [2,300kJ/h] 610W (620VA) [2,200kJ/h]

570W (580VA) [2,100kJ/h] 550W (560VA) [2,000kJ/h]

5,760W (5,860VA) [21,200kJ/h]

3TB, 2TB, 1TB (7,200rpm)

SAS (Max. 6Gbit/s)800GB, 400GB, 200GB, 100GB

3.5" nearline

SAS disk drive

Number of drives

1TB (7,200rpm)

SAS (Max. 6Gbit/s)

3


5/42


The ETERNUS DX60 S2/DX80 S2/DX90 S2 support the following RAID levels.

Use of RAID0 is not recommended because it is not redundant.For RAID0 configurations, data may be lost due to disk drive failure.

Recommended number disk drives

RAID0 2 - 16 2 - 16 *1

RAID1 2 2 2 (1Data + 1Mirror)RAID1+0 4 - 24 4 - 32 4 (2Data + 2Mirror)

6 (3Data + 3Mirror)8 (4Data + 4Mirror)

10 (5Data + 5Mirror)RAID5 3 - 16 3 - 16 3 (2Data + 1Parity)

4 (3Data + 1Parity)5 (4Data + 1Parity)6 (5Data + 1Parity)

RAID5+0 (3 - 12) x 2 (3 - 16) x 2 3 (2Data + 1Parity) x 24 (3Data + 1Parity) x 25 (4Data + 1Parity) x 26 (5Data + 1Parity) x 2

RAID6 5 - 16 5 - 16 5 (3Data + 2Parity)6 (4Data + 2Parity)7 (5Data + 2Parity)

*1: Use of RAID0 is not recommended because it is not redundant.

ETERNUS DX80 S2ETERNUS DX90 S2

Supported number disk drives

RAID level

(4) Suppo rted RAID

ETERNUS DX60 S2

4


6/42


(1) ETERNUS DX60 S2 View

- Base unit

Front Cover

Controller (Standard)(Additional Controller (Option))

Host Interface (Standard)

AC power cable (200V)(Standard)

LAN port

Drive interface (OUT) portPower Supply Unit (Standard)

Base unit rear view

- Drive Enclosure

Front Cover

Drive interface (OUT) portDrive interface (IN) port


Power Supply Unit (Standard)

Drive Enclosure r ear view

Drive Enclosure front view(3.5" type)

ETERNUS DX60 S2 View

Base unit front view Base unit front view(3.5" type) (2.5" type)

5


7/42


(2) ETERNUS DX80 S2, DX90 S2 View

- Base unit (Controller Enclosure)

3.5" disk 2.5" disk

Controller (Standard)(Additional Controller (Option))

Host Interface (Standard)


LAN port

Drive interface (OUT) portPower Supply Unit (Standard)

Base unit rear view

- Drive Enclosure

3.5" disk 2.5" disk

Drive interface (OUT) portDrive interface (IN) port


Power Supply Unit (Standard)

Drive Enclosure r ear view

(3.5" type) (2.5" type)

ETERNUS DX80 S2, DX90 S2 View

Base unit front view Base unit front view(3.5" type) (2.5" type)

Drive Enclosure front view Drive Enclosure front view

6


8/42


*1: Up to twelve 3.5" disk drives or twenty-four 2.5" disk drives can be installed in each controller enclosure.

(Mixture of 2.5/3.5inch drives in the same enclosure is not supported.)*2: The following table shows the type and number of drive enclosures that can be installed in DX60 S2.

3.5" type

2.5" type

ETERNUS DX60 S2 Product Diagrams

Base unit Drive Enclosure

3.5" type 2.5" type

ETERNUS DX60 S2 Max. 1 Not supported

Not supported Not supported

Server

ETERNUS DX60 S2 base unit

Disk Drive (Option) (Max, 12/24 drives can be installed *1)

......

AC power cable 200V 4m x2

Power distribution unit (AC200V) (Option)

3.5" Drive Enclosure (Option) *2

Disk Drive (Option) (Max, 12 drives can be installed)

......


Power distribution unit (AC200V)(Option) (Share with base unit)

SAS cable (0.75m) x2(Attached to Drive Enclosure)

LAN cable (category 5e) 5m x 2(Setup node/Management LAN

Connection)(Option)

Host Interface cable (Option)FC cable (5m) x 2

LAN cable (category 5e)(5m) x2SAS cable (1.5m) x2

Host interface(Standard/Option)

HBA (Host Bus Adaptor):FC / SAS / LAN card

Extension cable (Option)SAS cable (3m or 6m) x2(Order when standard cable is too short)

Controller Enclosure(Standard)

Controller Enclosure(Standard/Option)

Host interface(Standard)

7


9/42


Host Interface Option(At least one set of Host interfaces is mandatory forsingle-controller model. And two of the same hostinterface sets are mandatory for dual-controller.)- Fibre Channel- SAS

- iSCSI (1Gbit/s)- iSCSI (10Gbit/s)

- FCoE

*1: Up to twelve 3.5" disk drives or twenty-four 2.5" disk drives can be installed in each controller enclosure.(Mixture of 2.5/3.5inch drives in the same enclosure is not supported.)

*2: Mixture of 3.5" type drive enclosures and 2.5" type drive enclosures enablesmixture of 3.5" drives and 2.5" drives in the same machine.Up to 120 drives can be installed in a single ETERNUS DX80 S2.

Up to 240 drives can be installed in a single ETERNUS DX90 S2.The following table shows the type and number of drive enclosures that can be installed in DX80 S2/DX90 S2.

3.5" type2.5" type3.5" type

2.5" type

ETERNUS DX80 S2, DX90 S2 Product Diagrams

ETERNUS DX90 S2 Max. 9 Max. 9

Max. 9 Max. 9

ETERNUS DX80 S2

Base unit

Drive Enclosure

Server

2.5" type3.5" type

Max. 9Max. 9

Max. 4Max. 4

ETERNUS DX80 S2, DX90 S2 base unit


......

Controller Enclosure(One option must be chosen)


IEC cable x2 (Option)

Power distribution unit (AC200V)

(Option)

Drive Enclosure (Option)Total four/nine DE (2.5"/3.5") can be installed. *2


...... Power distribution unit (AC200V)(Option) (Share with base unit)

SAS cable (0.75m) x2(Attached to Drive Enclosure)

LAN cable (category 5e) 5m x 2(Setup node/Management LAN

Connection)(Option)(Remote monitoring function requires additional LAN

HBA (Host Bus Adaptor):FC / SAS / LAN / FCoE card

Extension cable (Option)SAS cable (3m or 6m) x2(Order when standard cable is too short)

Thin Provisioning Feature (Option)(Max. one license can be installed)


IEC cable x2 (Option)

Controller Enclosure(One option must bechosen)

8


10/42


i) ETERNUS DX60 S2 base unit (Dual controller type, Fibre Channel connection)

Rackmount type (2U), AC200V model

Enclosure x1- Controller (FC4Gbit/s x 2ports) x2- Cache memory (1G) x2- Power Supply Unit x2

At least two disk drives are mandatory. Up to 24 drives can be added.Up to 24 drives can be installed in 2.5" type base unit.Up to 12 drives can be installed in 3.5" type base unit and drive enclosure.

2.5" Drive Enclosure cannot be added.One 3.5" Drive Enclosures can be added.

- Contents of Package

Quantity Note

AC200V power cord 2 4m (NEMA L6-15P)

Rack mount kit 1 set

Safety Precautions 1User Guide 1 CDRead me first 1

ii) ETERNUS DX60 S2 base unit (Dual controller type, SAS connection)

Rackmount type (2U), AC200V modelEnclosure x1

- Controller (SAS x 2ports) x2- Cache memory (1G) x2- Power Supply Unit x2

At least two disk drives are mandatory. Up to 24 drives can be added.

Up to 24 drives can be installed in 2.5" type base unit.Up to 12 drives can be installed in 3.5" type base unit and drive enclosure.2.5" Drive Enclosure cannot be added.One 3.5" Drive Enclosures can be added.


Quantity Note

AC200V power cord 2 4m (NEMA L6-15P)Rack mount kit 1 setSafety Precautions 1User Guide 1 CDRead me first 1

(1) ETERNUS DX60 S2 (dual-controller type)

Components

ETERNUS DX60 S2

(2.5inch, 4Gbps, FC, dual-controller)ET062DCFU

ETERNUS DX60 S2

(3.5inch, 4Gbps, FC, dual-controller)ET062DDFU

Product name

Product ID

Configuration

Notes

Components

ETERNUS DX60 S2

(2.5inch, 3Gbps, SAS, dual-controller)

ETERNUS DX60 S2

(3.5inch, 3Gbps, SAS, dual-controller)ET062DCSU ET062DDSU

Product name

Product ID

Configuration

Notes

9


11/42

ETERNUS DX60 S2, DX80 S2, DX90 S2(1) ETERNUS DX60 S2 (dual-controller type)

iii) ETERNUS DX60 S2 Base Unit (Dual controller type, iSCSI connection)


- Controller (iSCSI x 2ports) x2- Cache memory (1G) x2- Power Supply Unit x2

At least two disk drives are mandatory. Up to 24 drives can be added.

Up to 24 drives can be installed in 2.5" type base unit.Up to 12 drives can be installed in 3.5" type base unit and drive enclosure.2.5" Drive Enclosure cannot be added.One 3.5" Drive Enclosures can be added.


Quantity Note


Rack mount kit 1 setSafety Precautions 1User Guide 1 CDRead me first 1

Components

ETERNUS DX60 S2

(2.5inch, 1Gbps, iSCSI, dual-ET062DCLUProduct ID

Configuration

Notes

ETERNUS DX60 S2

(3.5inch, 1Gbps, iSCSI, dual-ET062DDLU

Product name

10


12/42


i) ETERNUS DX60 S2 base unit (Single controller type, Fibre Channel connection)


Enclosure x1- Controller (FC4Gbit/s x 2ports) x1- Cache memory (1G) x1- Power Supply Unit x2




Quantity Note




- Additional Controller module (ETERNUS DX60 S2 Fibre Channel connection)

Additional controller module for DX60 S2 (2.5inch, 4Gbps, FC)[Field] ETEEC6CF-L- Controller x1 (with FC 4Gbps 2port)- Cache memory (1GB x1)

Additional controller module for DX60 S2 (3.5inch, 4Gbps, FC)[Field] ETEEC6DF-L- Controller x1 (with FC 4Gbps 2port)- Cache memory (1GB x1)

(2) ETERNUS DX60 S2 (singl e-cont rol ler type)


(2.5inch, 4Gbps, FC, Single-controller)

ETERNUS DX60 S2

(3.5inch, 4Gbps, FC, Single-controller)Product ID ET062SCFU ET062SDFU

Configuration

Notes

Components

ETERNUS DX60 S2 (2.5")


11


13/42

ETERNUS DX60 S2, DX80 S2, DX90 S2(2) ETERNUS DX60 S2 (singl e-cont rol ler type)

ii) ETERNUS DX60 S2 base unit (Single controller type, SAS connection)


- Controller (SAS x 2ports) x1- Cache memory (1G) x1- Power Supply Unit x2

At least two disk drives are mandatory. Up to 24 drives can be added.Up to 24 drives can be installed in 2.5" type base unit.Up to 12 drives can be installed in 3.5" type base unit and drive enclosure.2.5" Drive Enclosure cannot be added.One 3.5" Drive Enclosures can be added.


Quantity Note



- Additional Controller module (ETERNUS DX60 S2 SAS connection)

Additional controller module for DX60 S2 (2.5inch, 3Gbps, SAS)[Field] ETEEC6CS-L- Controller x1 (with SAS 3Gbps 2port)

- Cache memory (1GB x1)

Additional controller module for DX60 S2 (3.5inch, 3Gbps, SAS)

[Field] ETEEC6DS-L- Controller x1 (with SAS 3Gbps 2port)- Cache memory (1GB x1)

Notes


(2.5inch, 3Gbps, SAS, Single-

ETERNUS DX60 S2

(3.5inch, 3Gbps, SAS, Single-Product ID ET062SCSU ET062SDSU

Configuration

Components



12


14/42

ETERNUS DX60 S2, DX80 S2, DX90 S2(2) ETERNUS DX60 S2 (singl e-cont rol ler type)

iii) ETERNUS DX60 S2 Base Unit (Single controller type, iSCSI connection)


Enclosure x1- Controller (iSCSI x 2ports) x1- Cache memory (1G) x1- Power Supply Unit x2




Quantity Note




- Additional Controller module (ETERNUS DX60 S2 iSCSI connection)

Additional controller module for DX60 S2 (2.5inch, 1Gbps, iSCSI)[Field] ETEEC6CL-L- Controller x1 (with iSCSI 1Gbps 2port)- Cache memory (1GB x1)

Additional controller module for DX60 S2 (3.5inch, 1Gbps, iSCSI)[Field] ETEEC6DL-L- Controller x1 (with iSCSI 1Gbps 2port)- Cache memory (1GB x1)

Components


(2.5inch, 1Gbps, iSCSI, Single-

ETERNUS DX60 S2

(3.5inch, 1Gbps, iSCSI, Single-Product ID ET062SCLU ET062SDLU

Configuration

Notes



13


15/42


- ETERNUS DX80 S2 base unit (dual-controller type)


- Controller x2- Cache memory (2G) x2- Power Supply Unit x2

- Two sets of Host Interfaces are mandatory.- Up to 24 drives can be installed in 2.5" type.

Up to 12 drives can be installed in 3.5" type.- At least two disk drives are mandatory. Up to 120 drives can be added.- Up to nine 3.5" or four 2.5" Drive Enclosures can be added.


Quantity Note

AC200V power cord 2 4m (NEMA L6-15P)Rack mount kit 1 setSafety Precautions 1User Guide 1 CD

Read me first 1

ET082DDUET082DCU


ETERNUS DX80 S2

(2.5inch, dual-controller type)

ETERNUS DX80 S2


Components

Product ID

Product name

Notes

Configuration

14


16/42


- Host interface (ETERNUS DX80 S2)

Two host interface options are mandatory. (Four host ports are mandatory.)Up to four options can be installed. (Up to eight ports can be installed.)Either two or four options should be same type. (Either four or eight ports should be same type.)

Mixing different interfaces is supported.

Host interface for DX80 S2/DX90 S2 (FC 16G, 2port)

[Factory] ETEHH12- Host interface module (FC 16G) x1- SFP+ (16Gbit/s) module x2

Host interface for DX80 S2/DX90 S2 (FC 16G, 2port)[Field] ETEHH12-L

- Host interface module (FC 16G) x1

- SFP+ (16Gbit/s) module x2


[Factory] ETEHF12- Host interface module (FC 8G) x1- SFP+ (8Gbit/s) module x2


[Field] ETEHF12-L- Host interface module (FC 8G) x1- SFP+ (8Gbit/s) module x2

Host interface for DX80 S2/DX90 S2 (SAS, 2port)[Factory] ETEHS12- Host interface module (SAS) x1

Host interface for DX80 S2/DX90 S2 (SAS, 2port)[Field] ETEHS12-L

- Host interface module (SAS) x1

Host interface for DX80 S2/DX90 S2 (1Gbit/s, iSCSI, 2port)[Factory] ETEHL12

- Host interface module (iSCSI 1G) x1

Host interface for DX80 S2/DX90 S2 (1Gbit/s, iSCSI, 2port)[Field] ETEHL12-L


Host interface for DX80 S2/DX90 S2 (10Gbit/s, iSCSI, 2port, for optical cable)[Factory] ETEHY12- Host interface module (iSCSI 10G) x1- SFP+ (10Gbit/s) x2

Host interface for DX80 S2/DX90 S2 (10Gbit/s, iSCSI, 2port, for optical cable)[Field] ETEHY12-L


- SFP+ (10Gbit/s) x2

Host interface for DX80 S2/DX90 S2 (10Gbit/s, iSCSI, 2port, without SFP+, for copper cable)[Factory] ETEHY1N- Host interface module (iSCSI 10G) x1

Host interface for DX80 S2/DX90 S2 (10Gbit/s, iSCSI, 2port, without SFP+, for copper cable)[Field] ETEHY1N-L


ETERNUS DX80 S2

15


17/42


Host interface for DX80 S2/DX90 S2 (FCoE, 2port, for optical cable)

[Factory] ETEHC12- Host interface module (FCoE) x1- SFP+ (10Gbit/s) x2

Host interface for DX80 S2/DX90 S2 (FCoE, 2port, for optical cable)[Field] ETEHC12-L

- Host interface module (FCoE) x1- SFP+ (10Gbit/s) x2

Host interface for DX80 S2/DX90 S2 (FCoE, 2port, without SFP+, for copper cable)[Factory] ETEHC1N- Host interface module (FCoE) x1

Host interface for DX80 S2/DX90 S2 (FCoE, 2port, without SFP+, for copper cable)

[Field] ETEHC1N-L- Host interface module (FCoE) x1

[Factory]: Factory mount option

[Field]: Field upgrade option

16


18/42


- ETERNUS DX80 S2 base unit (single-controller type)


- Controller x1- Cache memory (2G) x1- Power Supply Unit x2

- One Host Interface set is mandatory.No additional controller can be installed in the base unit of the single controllermodel at the time of shipment.

- Up to 24 drives can be installed in 2.5" type.Up to 12 drives can be installed in 3.5" type.

- At least two disk drives are mandatory. Up to 120 drives can be added.- Up to nine 3.5" or four 2.5" Drive Enclosures can be added.

- Contents of Package Quantity Note




'- Additional Controller module (ETERNUS DX80 S2)

One Controller module can be added on single-controller type.

Additional controller module for DX80 S2[Field] ETEAC8A-L

- Controller x1- Cache memory (2GB x1)

Notes

Components

Configuration

(4) ETERNUS DX80 S2 (Single-controller type)


(2.5inch, single-controller type)

ETERNUS DX80 S2

(3.5inch, single-controller type)Product ID ET082SCU ET082SDU

ETERNUS DX80 S2

17


19/42

ETERNUS DX60 S2, DX80 S2, DX90 S2(4) ETERNUS DX80 S2 (Single-controller type)


One host interface option is mandatory. (Two host ports are mandatory.)Up to two options can be installed for single CM model. (Up to four ports can be installed.)Mixing different interfaces is supported for single CM model.

Up to four options can be installed for dual CM model. (Up to eight ports can be installed.)Either two or four options should be same type for dual CM model.(Either four or eight ports should be same type for dual CM model.)

Host interface for DX80 S2/DX90 S2 (FC 16G, 2port)[Factory] ETEHH12- Host interface module (FC 16G) x1- SFP+ (16Gbit/s) module x2


[Field] ETEHH12-L- Host interface module (FC 16G) x1- SFP+ (16Gbit/s) module x2

Host interface for DX80 S2/DX90 S2 (FC 8G, 2port)[Factory] ETEHF12- Host interface module (FC 8G) x1- SFP+ (8Gbit/s) module x2

Host interface for DX80 S2/DX90 S2 (FC 8G, 2port)[Field] ETEHF12-L

- Host interface module (FC 8G) x1- SFP+ (8Gbit/s) module x2

Host interface for DX80 S2/DX90 S2 (SAS, 2port)

[Factory] ETEHS12




Host interface for DX80 S2/DX90 S2 (1Gbit/s, iSCSI, 2port)[Factory] ETEHL12- Host interface module (iSCSI 1G) x1




Host interface for DX80 S2/DX90 S2 (10Gbit/s, iSCSI, 2port, for optical cable)

[Field] ETEHY12-L- Host interface module (iSCSI 10G) x1- SFP+ (10Gbit/s) x2

Host interface for DX80 S2/DX90 S2 (10Gbit/s, iSCSI, 2port, without SFP+, for copper cable)

[Factory] ETEHY1N- Host interface module (iSCSI 10G) x1



ETERNUS DX80 S2

18


20/42

ETERNUS DX60 S2, DX80 S2, DX90 S2(4) ETERNUS DX80 S2 (Single-controller type)










19


21/42


- ETERNUS DX90 S2 base unit (dual-controller type)

Rackmount type (2U), AC200VEnclosure x1

- Controller x2

- Cache memory (4GB) x2- Power Supply Unit x2

- Two sets of the same Host Interface are mandatory.Up to 24 drives can be installed in 2.5" type.

Up to 12 drives can be installed in 3.5" type.- At least two disk drives are mandatory. Up to 240 2.5" drives can be added.

Up to 120 3.5" drives can be added.- Up to nine Drive Enclosures(2.5"/3.5") can be added.


Quantity Note

AC200V power cord 2 4m (NEMA L6-15P)Rack mount kit 1 setSafety Precautions 1User Guide 1 CDRead me first 1


ETERNUS DX90 S2


ETERNUS DX90 S2

(3.5inch, dual-controller type)ET092DCU ET092DDU

Components

Product name

Product ID

Configuration

Notes

20


22/42



Two host ports are mandatory. (Four ports host interface are mandatory.)Up to four options can be installed. (Up to eight ports can be installed.)Either two or four options should be same type. (Either four or eight ports should be same type.)

Mixing different interfaces is supported.


[Factory] ETEHH12- Host interface module (FC 16G) x1- SFP+ (16Gbit/s) module x2

Host interface for DX80 S2/DX90 S2 (FC 16G, 2port)[Field] ETEHH12-L

- Host interface module (FC 16G) x1

- SFP+ (16Gbit/s) module x2


[Factory] ETEHF12- Host interface module (FC 8G) x1- SFP+ (8Gbit/s) module x2


[Field] ETEHF12-L- Host interface module (FC 8G) x1- SFP+ (8Gbit/s) module x2

Host interface for DX80 S2/DX90 S2 (SAS, 2port)[Factory] ETEHS12- Host interface module (SAS) x1



Host interface for DX80 S2/DX90 S2 (1Gbit/s, iSCSI, 2port)[Factory] ETEHL12





Host interface for DX80 S2/DX90 S2 (10Gbit/s, iSCSI, 2port, for optical cable)[Field] ETEHY12-L


- SFP+ (10Gbit/s) x2

Host interface for DX80 S2/DX90 S2 (10Gbit/s, iSCSI, 2port, without SFP+, for copper cable)[Factory] ETEHY1N- Host interface module (iSCSI 10G) x1



ETERNUS DX90 S2

21


23/42











22


24/42


- ETERNUS DX90 S2 base unit (single-controller type)

Rackmount type (2U), AC200VEnclosure x1

- Controller x1

- Cache memory (4GB) x1- Power Supply Unit x2

- One set of the same Host Interfaces are mandatory.No additional controller can be installed in the base unit of the single controller

model at the time of shipment.- Up to 24 drives can be installed in 2.5" type.

Up to 12 drives can be installed in 3.5" type.- At least two disk drives are mandatory. Up to 240 2.5" drives can be added.

Up to 120 3.5" drives can be added.- Up to nine 3.5" or four 2.5" Drive Enclosures can be added.

- Contents of Package Quantity Note



- Additional Controller module (ETERNUS DX90 S2)

One Controller module can be added on single-controller type.

Additional controller module for DX90 S2[Field] ETEAC9A-L

- Controller x1

- Cache memory (4GB x1)

(6) ETERNUS DX90 S2 (si ngle-cont rol ler type)


(2.5inch, single-controller type)

ETERNUS DX90 S2

(3.5inch, single-controller type)Product ID ET092SCU ET092SDU

Configuration

Notes

Components

ETERNUS DX90 S2

23


25/42

ETERNUS DX60 S2, DX80 S2, DX90 S2(6) ETERNUS DX90 S2 (si ngle-cont rol ler type)


One host interface option is mandatory. (Two host ports are mandatory.)Up to two options can be installed for single CM model. (Up to four ports can be installed.)Mixing different interfaces is supported for single CM model.

Up to four options can be installed for dual CM model. (Up to eight ports can be installed.)Either two or four options should be same type for dual CM model.(Either four or eight ports should be same type for dual CM model.)

Host interface for DX80 S2/DX90 S2 (FC 16G, 2port)[Factory] ETEHH12- Host interface module (FC 16G) x1- SFP+ (16Gbit/s) module x2


[Field] ETEHH12-L- Host interface module (FC 16G) x1- SFP+ (16Gbit/s) module x2

Host interface for DX80 S2/DX90 S2 (FC 8G, 2port)[Factory] ETEHF12- Host interface module (FC 8G) x1- SFP+ (8Gbit/s) module x2

Host interface for DX80 S2/DX90 S2 (FC 8G, 2port)[Field] ETEHF12-L

- Host interface module (FC 8G) x1- SFP+ (8Gbit/s) module x2

Host interface for DX80 S2/DX90 S2 (SAS, 2port)

[Factory] ETEHS12




Host interface for DX80 S2/DX90 S2 (1Gbit/s, iSCSI, 2port)[Factory] ETEHL12- Host interface module (iSCSI 1G) x1




Host interface for DX80 S2/DX90 S2 (10Gbit/s, iSCSI, 2port, for optical cable)

[Field] ETEHY12-L- Host interface module (iSCSI 10G) x1- SFP+ (10Gbit/s) x2

Host interface for DX80 S2/DX90 S2 (10Gbit/s, iSCSI, 2port, without SFP+, for copper cable)

[Factory] ETEHY1N- Host interface module (iSCSI 10G) x1



ETERNUS DX90 S2

24


26/42

ETERNUS DX60 S2, DX80 S2, DX90 S2(6) ETERNUS DX90 S2 (si ngle-cont rol ler type)










25


27/42


- Disk drive option (2.5inch disk drive)* 2.5inch drives are installed in the 2.5inch type controller enclosure

Disk drive

* Mandatory option

* Up to 24 drives can be installed in a 2.5inch base unit.2.5inch 10krpm SAS disk drive

Factory mount options

Disk Drive(2.5inch) 300GB 10krpm x2 (RAID1) for DX60 S2 ETED3MBDisk Drive(2.5inch) 300GB 10krpm x6 (RAID5) for DX60 S2 ETED3PBDisk Drive(2.5inch) 300GB 10krpm x6 (RAID6) for DX60 S2 ETED3DBDisk Drive(2.5inch) 300GB 10krpm x6 (RAID1+0) for DX60 S2 ETED3SB

Disk Drive(2.5inch) 300GB 10krpm x1 for DX60 S2 ETED3HB

Disk Drive(2.5inch) 450GB 10krpm x2 (RAID1) for DX60 S2 ETED4MBDisk Drive(2.5inch) 450GB 10krpm x6 (RAID5) for DX60 S2 ETED4PBDisk Drive(2.5inch) 450GB 10krpm x6 (RAID6) for DX60 S2 ETED4DBDisk Drive(2.5inch) 450GB 10krpm x6 (RAID1+0) for DX60 S2 ETED4SBDisk Drive(2.5inch) 450GB 10krpm x1 for DX60 S2 ETED4HBDisk Drive(2.5inch) 600GB 10krpm x2 (RAID1) for DX60 S2 ETED6MB

Disk Drive(2.5inch) 600GB 10krpm x6 (RAID5) for DX60 S2 ETED6PBDisk Drive(2.5inch) 600GB 10krpm x6 (RAID6) for DX60 S2 ETED6DBDisk Drive(2.5inch) 600GB 10krpm x6 (RAID1+0) for DX60 S2 ETED6SBDisk Drive(2.5inch) 600GB 10krpm x1 for DX60 S2 ETED6HBDisk Drive(2.5inch) 900GB 10krpm x2 (RAID1) for DX60 S2 ETED9MBDisk Drive(2.5inch) 900GB 10krpm x6 (RAID5) for DX60 S2 ETED9PBDisk Drive(2.5inch) 900GB 10krpm x6 (RAID6) for DX60 S2 ETED9DB

Disk Drive(2.5inch) 900GB 10krpm x6 (RAID1+0) for DX60 S2 ETED9SBDisk Drive(2.5inch) 900GB 10krpm x1 for DX60 S2 ETED9HBField upgrade optionsDisk Drive(2.5inch) 300GB 10krpm x1 for DX60 S2 ETED3HB-LDisk Drive(2.5inch) 450GB 10krpm x1 for DX60 S2 ETED4HB-LDisk Drive(2.5inch) 600GB 10krpm x1 for DX60 S2 ETED6HB-LDisk Drive(2.5inch) 900GB 10krpm x1 for DX60 S2 ETED9HB-L

2.5inch 7.2krpm SAS disk drive


Disk Drive(2.5inch) 1TB 7.2krpm x2 (RAID1) for DX60 S2 ETEN1MB

Disk Drive(2.5inch) 1TB 7.2krpm x6 (RAID5) for DX60 S2 ETEN1PBDisk Drive(2.5inch) 1TB 7.2krpm x6 (RAID6) for DX60 S2 ETEN1DB

Disk Drive(2.5inch) 1TB 7.2krpm x6 (RAID1+0) for DX60 S2 ETEN1SBDisk Drive(2.5inch) 1TB 7.2krpm x1 for DX60 S2 ETEN1HBField upgrade optionsDisk Drive(2.5inch) 1TB 7.2krpm x1 for DX60 S2 ETEN1HB-L

#1 Two or more disk drives are mandatory for one base unit.#2 Install hot spare disks for stable operation.#3 A mixture of different size disk drives is supported.

The capacity of the hot spare disk should match the capacity of the largest disk drive.Ex.) 450GB/10krpm SAS disk x6 (RAID5) x1,

600GB/10krpm SAS disk x6 (RAID5) x1

=> 600GB disk drive x1 is the hot spare.#4 A mixture of different disk drives cannot be used for a single RAID group. Same type disk drives

(same capacity, rotation speed and interface speed) are required.

(7) Options

2.5inch disk drive

Product name

Product name

Product ID

Product ID

ETERNUS DX60 S2

26


28/42

ETERNUS DX60 S2, DX80 S2, DX90 S2(7) Options

- Disk drive option (3.5inch disk drive)

Disk drive

* Mandatory option* Up to 12 drives can be installed in a 3.5inch base unit or a 3.5inch drive enclosure.


Disk Drive(3.5inch) 300GB 15krpm x1 for DX60 S2 ETED3HADisk Drive(3.5inch) 300GB 15krpm x6 (RAID5) for DX60 S2 ETED3PADisk Drive(3.5inch) 300GB 15krpm x6 (RAID6) for DX60 S2 ETED3DADisk Drive(3.5inch) 300GB 15krpm x6 (RAID1+0) for DX60 S2 ETED3SA

Disk Drive(3.5inch) 300GB 15krpm x2 (RAID1) for DX60 S2 ETED3MADisk Drive(3.5inch) 450GB 15krpm x2 (RAID1) for DX60 S2 ETED4MADisk Drive(3.5inch) 450GB 15krpm x6 (RAID5)for DX60 S2 ETED4PA

Disk Drive(3.5inch) 450GB 15krpm x6 (RAID6) for DX60 S2 ETED4DADisk Drive(3.5inch) 450GB 15krpm x6 (RAID1+0) for DX60 S2 ETED4SADisk Drive(3.5inch) 450GB 15krpm x1 for DX60 S2 ETED4HADisk Drive(3.5inch) 600GB 15krpm x2 (RAID1) for DX60 S2 ETED6MADisk Drive(3.5inch) 600GB 15krpm x6 (RAID5) for DX60 S2 ETED6PA

Disk Drive(3.5inch) 600GB 15krpm x6 (RAID6) for DX60 S2 ETED6DADisk Drive(3.5inch) 600GB 15krpm x6 (RAID1+0) for DX60 S2 ETED6SADisk Drive(3.5inch) 600GB 15krpm x1 for DX60 S2 ETED6HADisk Drive(3.5inch) 1TB 7.2krpm x2 (RAID1) for DX60 S2 ETEN1MADisk Drive(3.5inch) 1TB 7.2krpm x6 (RAID5) for DX60 S2 ETEN1PADisk Drive(3.5inch) 1TB 7.2krpm x6 (RAID6) for DX60 S2 ETEN1DADisk Drive(3.5inch) 1TB 7.2krpm x6 (RAID1+0) for DX60 S2 ETEN1SA

Disk Drive(3.5inch) 1TB 7.2krpm x1 for DX60 S2 ETEN1HA

Disk Drive(3.5inch) 2TB 7.2krpm x2 (RAID1) for DX60 S2 ETEN2MADisk Drive(3.5inch) 2TB 7.2krpm x6 (RAID5) for DX60 S2 ETEN2PADisk Drive(3.5inch) 2TB 7.2krpm x6 (RAID6) for DX60 S2 ETEN2DADisk Drive(3.5inch) 2TB 7.2krpm x6 (RAID1+0) for DX60 S2 ETEN2SADisk Drive(3.5inch) 2TB 7.2krpm x1 for DX60 S2 ETEN2HADisk Drive(3.5inch) 3TB 7.2krpm x2 (RAID1) for DX60 S2 ETEN3MA

Disk Drive(3.5inch) 3TB 7.2krpm x6 (RAID5) for DX60 S2 ETEN3PADisk Drive(3.5inch) 3TB 7.2krpm x6 (RAID6) for DX60 S2 ETEN3DADisk Drive(3.5inch) 3TB 7.2krpm x6 (RAID1+0) for DX60 S2 ETEN3SADisk Drive(3.5inch) 3TB 7.2krpm x1 for DX60 S2 ETEN3HAField upgrade optionsDisk Drive(3.5inch) 300GB 15krpm x1 for DX60 S2 ETED3HA-L

Disk Drive(3.5inch) 450GB 15krpm x1 for DX60 S2 ETED4HA-LDisk Drive(3.5inch) 600GB 15krpm x1 for DX60 S2 ETED6HA-LDisk Drive(3.5inch) 1TB 7.2krpm x1 for DX60 S2 ETEN1HA-LDisk Drive(3.5inch) 2TB 7.2krpm x1 for DX60 S2 ETEN2HA-LDisk Drive(3.5inch) 3TB 7.2krpm x1 for DX60 S2 ETEN3HA-L

#1 Two or more disk drives are mandatory for one base unit.#2 Install hot spare disks for stable operation.

#3 A mixture of different capacity disk drives is supported.When installing different capacity disk drives in one base unit,the capacity of the hot spare disk should match the capacity of the largest disk drive.

Ex.) 450GB/15krpm SAS disk x6 (RAID5) x1, 600GB/15krpm SAS disk x6 (RAID5) x1=> 600GB disk drive x1 is the hot spare.

#4 A mixture of different disks (SAS disk drives and Nearline SAS disk drives) is supported.When installing different type disk drives in one base unit,it is recommended that at least one hot spare disk of each type be installed.

#5 A mixture of different disk drives cannot be used for a single RAID group. Same type disk drives(same capacity, rotation speed and interface speed) are required.

3.5inch disk drive

Product name Product ID

ETERNUS DX60 S2

27


29/42


- Drive enclosure (3.5inch)

Dual-IOM type supports dual controller model only.

Drive enclosure for DX60 S2 (3.5inch, dual-expander type)[Factory] ETEED2DU

[Field] ETEED2DU-L- Rack mount type (2U)- Enclosure [Expander (SAS 1port) x2, PSU x2] x1- Up to 12 disk drives can be installed in one drive enclosure.- Attachment list

Qty

Rackmount kit 1 set

AC200V power cable 2 4m (NEMA L6-15P)

SAS cable 2 75cm: Bace unit Drive enclosure connection

Disk driveRefer "Disk drive option (3.5inch)"* Up to 12 disk drives can be installed.

Drive enclosure for DX60 S2 (3.5inch, single-expander type)[Factory] ETEED1DU

[Field] ETEED1DU-L- Rack mount type (2U)- Enclosure [Expander (SAS 1port) x1, PSU x2] x1

- Up to 12 disk drives can be installed in one drive enclosure.- Attachment list

Qty

Rackmount kit 1 set

AC200V power cable 2 4m (NEMA L6-15P)SAS cable 1 75cm: Bace unit

Drive enclosure connection

Additional expander for DX60 S2 (3.5inch)[Field] ETEEXD-L

- Attachment list

Qty

IOM 1



- Extension cable

- The Extension cable (3m) kit option can be ordered if the SAS cables (75cm)supplied with the drive enclosures are too short to connect.

Extension cable between enclosures for DX60 S2 (3m)[Field] ETEC1M3-L

- 1x mini SAS cable 3m

Attachment Notes

Attachment Notes

Attachment Notes

ETERNUS DX60 S2

ETERNUS DX60 S2

28


30/42


- Disk drive option (2.5inch disk drive)* 2.5inch drives are installed in the 2.5inch type controller enclosure and drive enclosures.

Disk drive

* Mandatory option

* Up to 24 drives can be installed in a 2.5inch base unit or a 2.5inch drive enclosure.

2.5inch 10krpm SAS disk drive


Disk Drive(2.5inch) 300GB 10krpm x2 (RAID1) for DX80 S2/DX90 S2 ETED3MCDisk Drive(2.5inch) 300GB 10krpm x6 (RAID5) for DX80 S2/DX90 S2 ETED3PCDisk Drive(2.5inch) 300GB 10krpm x6 (RAID6) for DX80 S2/DX90 S2 ETED3DC

Disk Drive(2.5inch) 300GB 10krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETED3SC

Disk Drive(2.5inch) 300GB 10krpm x1 for DX80 S2/DX90 S2 ETED3HCDisk Drive(2.5inch) 450GB 10krpm x2 (RAID1) for DX80 S2/DX90 S2 ETED4MCDisk Drive(2.5inch) 450GB 10krpm x6 (RAID5) for DX80 S2/DX90 S2 ETED4PCDisk Drive(2.5inch) 450GB 10krpm x6 (RAID6) for DX80 S2/DX90 S2 ETED4DCDisk Drive(2.5inch) 450GB 10krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETED4SCDisk Drive(2.5inch) 450GB 10krpm x1 for DX80 S2/DX90 S2 ETED4HC

Disk Drive(2.5inch) 600GB 10krpm x2 (RAID1) for DX80 S2/DX90 S2 ETED6MCDisk Drive(2.5inch) 600GB 10krpm x6 (RAID5) for DX80 S2/DX90 S2 ETED6PCDisk Drive(2.5inch) 600GB 10krpm x6 (RAID6) for DX80 S2/DX90 S2 ETED6DCDisk Drive(2.5inch) 600GB 10krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETED6SCDisk Drive(2.5inch) 600GB 10krpm x1 for DX80 S2/DX90 S2 ETED6HCDisk Drive(2.5inch) 900GB 10krpm x2 (RAID1) for DX80 S2/DX90 S2 ETED9MCDisk Drive(2.5inch) 900GB 10krpm x6 (RAID5) for DX80 S2/DX90 S2 ETED9PC

Disk Drive(2.5inch) 900GB 10krpm x6 (RAID6) for DX80 S2/DX90 S2 ETED9DCDisk Drive(2.5inch) 900GB 10krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETED9SCDisk Drive(2.5inch) 900GB 10krpm x1 for DX80 S2/DX90 S2 ETED9HCField upgrade optionsDisk Drive(2.5inch) 300GB 10krpm x1 for DX80 S2/DX90 S2 ETED3HC-LDisk Drive(2.5inch) 450GB 10krpm x1 for DX80 S2/DX90 S2 ETED4HC-LDisk Drive(2.5inch) 600GB 10krpm x1 for DX80 S2/DX90 S2 ETED6HC-L

Disk Drive(2.5inch) 900GB 10krpm x1 for DX80 S2/DX90 S2 ETED9HC-L

2.5inch 15krpm SAS disk drive


Disk Drive (2.5inch) 300GB 15krpm x2 (RAID1) for DX80 S2/DX90 S2 ETED3MGDisk Drive (2.5inch) 300GB 15krpm x6 (RAID5) for DX80 S2/DX90 S2 ETED3PG

Disk Drive (2.5inch) 300GB 15krpm x6 (RAID6) for DX80 S2/DX90 S2 ETED3DGDisk Drive (2.5inch) 300GB 15krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETED3SGDisk Drive (2.5inch) 300GB 15krpm x1 for DX80 S2/DX90 S2 ETED3HGField upgrade optionsDisk Drive (2.5inch) 300GB 15krpm x1 for DX80 S2/DX90 S2 ETED3HG-L

2.5inch 7.2krpm SAS disk drive


Disk Drive (2.5inch) 1TB 7.2krpm x2 (RAID1) for DX80 S2/DX90 S2 ETEN1MCDisk Drive (2.5inch) 1TB 7.2krpm x6 (RAID5) for DX80 S2/DX90 S2 ETEN1PC

Disk Drive (2.5inch) 1TB 7.2krpm x6 (RAID6) for DX80 S2/DX90 S2 ETEN1DCDisk Drive (2.5inch) 1TB 7.2krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETEN1SCDisk Drive (2.5inch) 1TB 7.2krpm x1 for DX80 S2/DX90 S2 ETEN1HCField upgrade options

Disk Drive (2.5inch) 1TB 7.2krpm x1 for DX80 S2/DX90 S2 ETEN1HC-L

2.5inch disk drive


Product IDProduct name


ETERNUS DX80 S2, DX90

29


31/42


Self Encrypting Disk Drive, 2.5inch 10krpm SAS disk drive


Self Encrypting Disk Drive (2.5inch) 300GB 10krpm x2 (RAID1) for DX80 S2/DX90 S2 ETED3MESelf Encrypting Disk Drive (2.5inch) 300GB 10krpm x6 (RAID5) for DX80 S2/DX90 S2 ETED3PESelf Encrypting Disk Drive (2.5inch) 300GB 10krpm x6 (RAID6) for DX80 S2/DX90 S2 ETED3DESelf Encrypting Disk Drive (2.5inch) 300GB 10krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETED3SE

Self Encrypting Disk Drive (2.5inch) 300GB 10krpm x1 for DX80 S2/DX90 S2 ETED3HESelf Encrypting Disk Drive (2.5inch) 450GB 10krpm x2 (RAID1) for DX80 S2/DX90 S2 ETED4MESelf Encrypting Disk Drive (2.5inch) 450GB 10krpm x6 (RAID5) for DX80 S2/DX90 S2 ETED4PESelf Encrypting Disk Drive (2.5inch) 450GB 10krpm x6 (RAID6) for DX80 S2/DX90 S2 ETED4DESelf Encrypting Disk Drive (2.5inch) 450GB 10krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETED4SESelf Encrypting Disk Drive (2.5inch) 450GB 10krpm x1 for DX80 S2/DX90 S2 ETED4HESelf Encrypting Disk Drive (2.5inch) 600GB 10krpm x2 (RAID1) for DX80 S2/DX90 S2 ETED6MESelf Encrypting Disk Drive (2.5inch) 600GB 10krpm x6 (RAID5) for DX80 S2/DX90 S2 ETED6PE

Self Encrypting Disk Drive (2.5inch) 600GB 10krpm x6 (RAID6) for DX80 S2/DX90 S2 ETED6DESelf Encrypting Disk Drive (2.5inch) 600GB 10krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETED6SESelf Encrypting Disk Drive (2.5inch) 600GB 10krpm x1 for DX80 S2/DX90 S2 ETED6HESelf Encrypting Disk Drive (2.5inch) 900GB 10krpm x2 (RAID1) for DX80 S2/DX90 S2 ETED9ME

Self Encrypting Disk Drive (2.5inch) 900GB 10krpm x6 (RAID5) for DX80 S2/DX90 S2 ETED9PESelf Encrypting Disk Drive (2.5inch) 900GB 10krpm x6 (RAID6) for DX80 S2/DX90 S2 ETED9DESelf Encrypting Disk Drive (2.5inch) 900GB 10krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETED9SE

Self Encrypting Disk Drive (2.5inch) 900GB 10krpm x1 for DX80 S2/DX90 S2 ETED9HEField upgrade optionsSelf Encrypting Disk Drive (2.5inch) 300GB 10krpm x1 for DX80 S2/DX90 S2 ETED3HE-LSelf Encrypting Disk Drive (2.5inch) 450GB 10krpm x1 for DX80 S2/DX90 S2 ETED4HE-LSelf Encrypting Disk Drive (2.5inch) 600GB 10krpm x1 for DX80 S2/DX90 S2 ETED6HE-LSelf Encrypting Disk Drive (2.5inch) 900GB 10krpm x1 for DX80 S2/DX90 S2 ETED9HE-L

#1 Two or more disk drives are mandatory for one base unit.

#2 Install hot spare disks for stable operation.#3 A mixture of different size disk drives is supported.

The capacity of the hot spare disk should match the capacity of the largest disk drive.Ex.) 450GB/10krpm SAS disk x6 (RAID5) x1,

600GB/10krpm SAS disk x6 (RAID5) x1=> 600GB disk drive x1 is the hot spare.



30


32/42


'- Disk drive option (3.5inch disk drive)

Disk drive

* Mandatory option* Up to 12 drives can be installed in a 3.5inch base unit or a 3.5inch drive enclosure.


Disk Drive(3.5inch) 300GB 15krpm x2 (RAID1) for DX80 S2/DX90 S2 ETED3MDDisk Drive(3.5inch) 300GB 15krpm x6 (RAID5) for DX80 S2/DX90 S2 ETED3PDDisk Drive(3.5inch) 300GB 15krpm x6 (RAID6) for DX80 S2/DX90 S2 ETED3DDDisk Drive(3.5inch) 300GB 15krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETED3SD

Disk Drive(3.5inch) 300GB 15krpm x1 for DX80 S2/DX90 S2 ETED3HDDisk Drive(3.5inch) 450GB 15krpm x2 (RAID1) for DX80 S2/DX90 S2 ETED4MDDisk Drive(3.5inch) 450GB 15krpm x6 (RAID5) for DX80 S2/DX90 S2 ETED4PD

Disk Drive(3.5inch) 450GB 15krpm x6 (RAID6) for DX80 S2/DX90 S2 ETED4DDDisk Drive(3.5inch) 450GB 15krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETED4SDDisk Drive(3.5inch) 450GB 15krpm x1 for DX80 S2/DX90 S2 ETED4HDDisk Drive(3.5inch) 600GB 15krpm x2 (RAID1) for DX80 S2/DX90 S2 ETED6MDDisk Drive(3.5inch) 600GB 15krpm x6 (RAID5) for DX80 S2/DX90 S2 ETED6PD

Disk Drive(3.5inch) 600GB 15krpm x6 (RAID6) for DX80 S2/DX90 S2 ETED6DDDisk Drive(3.5inch) 600GB 15krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETED6SDDisk Drive(3.5inch) 600GB 10krpm x1 for DX80 S2/DX90 S2 ETED6HDDisk Drive(3.5inch) 1TB 7.2krpm x2 (RAID1) for DX80 S2/DX90 S2 ETEN1MDDisk Drive(3.5inch) 1TB 7.2krpm x6 (RAID5) for DX80 S2/DX90 S2 ETEN1PDDisk Drive(3.5inch) 1TB 7.2krpm x6 (RAID6) for DX80 S2/DX90 S2 ETEN1DDDisk Drive(3.5inch) 1TB 7.2krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETEN1SD

Disk Drive(3.5inch) 1TB 7.2krpm x1 for DX80 S2/DX90 S2 ETEN1HD

Disk Drive(3.5inch) 2TB 7.2krpm x2 (RAID1) for DX80 S2/DX90 S2 ETEN2MDDisk Drive(3.5inch) 2TB 7.2krpm x6 (RAID5) for DX80 S2/DX90 S2 ETEN2PDDisk Drive(3.5inch) 2TB 7.2krpm x6 (RAID6) for DX80 S2/DX90 S2 ETEN2DDDisk Drive(3.5inch) 2TB 7.2krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETEN2SDDisk Drive(3.5inch) 2TB 7.2krpm x1 for DX80 S2/DX90 S2 ETEN2HDDisk Drive(3.5inch) 3TB 7.2krpm x2 (RAID1) for DX80 S2/DX90 S2 ETEN3MD

Disk Drive(3.5inch) 3TB 7.2krpm x6 (RAID5) for DX80 S2/DX90 S2 ETEN3PDDisk Drive(3.5inch) 3TB 7.2krpm x6 (RAID6) for DX80 S2/DX90 S2 ETEN3DDDisk Drive(3.5inch) 3TB 7.2krpm x6 (RAID1+0) for DX80 S2/DX90 S2 ETEN3SDDisk Drive(3.5inch) 3TB 7.2krpm x1 for DX80 S2/DX90 S2 ETEN3HDField upgrade optionsDisk Drive(3.5inch) 300GB 15krpm x1 for DX80 S2/DX90 S2 ETED3HD-L

Disk Drive(3.5inch) 450GB 15krpm x1 for DX80 S2/DX90 S2 ETED4HD-LDisk Drive(3.5inch) 600GB 15krpm x1 for DX80 S2/DX90 S2 ETED6HD-LDisk Drive(3.5inch) 1TB 7.2krpm x1 for DX80 S2/DX90 S2 ETEN1HD-LDisk Drive(3.5inch) 2TB 7.2krpm x1 for DX80 S2/DX90 S2 ETEN2HD-LDisk Drive(3.5inch) 3TB 7.2krpm x1 for DX80 S2/DX90 S2 ETEN3HD-L

#1 Two or more disk drives are mandatory for one base unit.#2 Install hot spare disks for stable operation.

#3 A mixture of different capacity disk drives is supported.When installing different capacity disk drives in one base unit,the capacity of the hot spare disk should match the capacity of the largest disk drive.

Ex.) 450GB/15krpm SAS disk x6 (RAID5) x1, 600GB/15krpm SAS disk x6 (RAID5) x1=> 600GB disk drive x1 is the hot spare.

#4 A mixture of different disks (SAS disk drives and Nearline SAS disk drives) is supported.When installing different type disk drives in one base unit,it is recommended that at least one hot spare disk of each type be installed.



3.5inch disk drive


31


33/42


- SSD

SSD2.5inch disk drives


SSD(2.5inch) 100GB x2 (RAID1) for DX80 S2/DX90 S2 ETES1MC

SSD(2.5inch) 100GB x4 (RAID5) for DX80 S2/DX90 S2 ETES1PCSSD(2.5inch) 100GB x6 (RAID1+0) for DX80 S2/DX90 S2 ETES1SC

SSD(2.5inch) 100GB x1 for DX80 S2/DX90 S2 ETES1HC

SSD(2.5inch) 200GB x2 (RAID1) for DX80 S2/DX90 S2 ETES2MCSSD(2.5inch) 200GB x4 (RAID5) for DX80 S2/DX90 S2 ETES2PCSSD(2.5inch) 200GB x6 (RAID1+0) for DX80 S2/DX90 S2 ETES2SCSSD(2.5inch) 200GB x1 for DX80 S2/DX90 S2 ETES2HCSSD(2.5inch) 400GB x2 (RAID1) for DX80 S2/DX90 S2 ETES4MC

SSD(2.5inch) 400GB x4 (RAID5) for DX80 S2/DX90 S2 ETES4PCSSD(2.5inch) 400GB x6 (RAID1+0) for DX80 S2/DX90 S2 ETES4SC

SSD(2.5inch) 400GB x1 for DX80 S2/DX90 S2 ETES4HCSSD(2.5inch) 800GB x2 (RAID1) for DX80 S2/DX90 S2 ETES8MCSSD(2.5inch) 800GB x4 (RAID5) for DX80 S2/DX90 S2 ETES8PCSSD(2.5inch) 800GB x6 (RAID1+0) for DX80 S2/DX90 S2 ETES8SCSSD(2.5inch) 800GB x1 for DX80 S2/DX90 S2 ETES8HC

Field upgrade options

SSD(2.5inch) 100GB x1 for DX80 S2/DX90 S2 ETES1HC-L

SSD(2.5inch) 200GB x1 for DX80 S2/DX90 S2 ETES2HC-LSSD(2.5inch) 400GB x1 for DX80 S2/DX90 S2 ETES4HC-LSSD(2.5inch) 800GB x1 for DX80 S2/DX90 S2 ETES8HC-L

SSD3.5inch disk drives

Factory mount optionsSSD(3.5inch) 100GB x2 (RAID1) for DX80 S2/DX90 S2 ETES1MDSSD(3.5inch) 100GB x4 (RAID5) for DX80 S2/DX90 S2 ETES1PDSSD(3.5inch) 100GB x6 (RAID1+0) for DX80 S2/DX90 S2 ETES1SDSSD(3.5inch) 100GB x1 for DX80 S2/DX90 S2 ETES1HDSSD(3.5inch) 200GB x2 (RAID1) for DX80 S2/DX90 S2 ETES2MDSSD(3.5inch) 200GB x4 (RAID5) for DX80 S2/DX90 S2 ETES2PD

SSD(3.5inch) 200GB x6 (RAID1+0) for DX80 S2/DX90 S2 ETES2SDSSD(3.5inch) 200GB x1 for DX80 S2/DX90 S2 ETES2HDSSD(3.5inch) 400GB x2 (RAID1) for DX80 S2/DX90 S2 ETES4MDSSD(3.5inch) 400GB x4 (RAID5) for DX80 S2/DX90 S2 ETES4PDSSD(3.5inch) 400GB x6 (RAID1+0) for DX80 S2/DX90 S2 ETES4SD

SSD(3.5inch) 400GB x1 for DX80 S2/DX90 S2 ETES4HDSSD(3.5inch) 800GB x2 (RAID1) for DX80 S2/DX90 S2 ETES8MD

SSD(3.5inch) 800GB x4 (RAID5) for DX80 S2/DX90 S2 ETES8PDSSD(3.5inch) 800GB x6 (RAID1+0) for DX80 S2/DX90 S2 ETES8SDSSD(3.5inch) 800GB x1 for DX80 S2/DX90 S2 ETES8HDField upgrade optionsSSD(3.5inch) 100GB x1 for DX80 S2/DX90 S2 ETES1HD-LSSD(3.5inch) 200GB x1 for DX80 S2/DX90 S2 ETES2HD-LSSD(3.5inch) 400GB x1 for DX80 S2/DX90 S2 ETES4HD-LSSD(3.5inch) 800GB x1 for DX80 S2/DX90 S2 ETES8HD-L

* SSD supports RAID1, RAID1+0 and RAID5 only.



32


34/42




Drive enclosure for DX80 S2/DX90 S2 (2.5inch, dual-IOM type)

[Factory] ETEAD2CU[Field] ETEAD2CU-L

- Rack mount type (2U)- Enclosure [IOM (SAS 1port) x2, PSU x2] x1- Up to 24 disk drives can be installed in one drive enclosure.- Attachment list

Qty

Rackmount kit 1 set


Drive enclosure connectionDisk driveRefer "Disk drive option (2.5inch)"* Up to 24 disk drives can be installed.

Drive enclosure for DX80 S2/DX90 S2 (2.5inch, single-IOM type)

[Factory] ETEAD1CU[Field] ETEAD1CU-L

- Rack mount type (2U)- Enclosure [IOM (SAS 1port) x1, PSU x2] x1- Up to 24 disk drives can be installed in one drive enclosure.- Attachment list

Qty

Rackmount kit 1 set


Drive enclosure connection

Additional IOM for DX80 S2/DX90 S2

[Field] ETEAMA-L- Attachment list

Qty

IOM 1


Disk drive

Refer "Disk drive option (2.5inch)"* Up to 24 disk drives can be installed.

NotesAttachment

Attachment Notes

Attachment Notes

ETERNUS DX80 S2, DX90 S2

33


35/42




Drive enclosure for DX80 S2/DX90 S2 (3.5inch, dual-IOM type)[Factory] ETEAD2DU

[Field] ETEAD2DU-L- Rack mount type (2U)- Enclosure [IOM (SAS 1port) x2, PSU x2] x1- Up to 12 disk drives can be installed in one drive enclosure.- Attachment list

Qty

Rackmount kit 1 set

AC200V power cable 2 4m (NEMA L6-15P)

SAS cable 2 75cm: Bace unit Drive enclosure connectionDisk drive

Refer "Disk drive option (3.5inch)"* Up to 12 disk drives can be installed.

Drive enclosure for DX80 S2/DX90 S2 (3.5inch, single-IOM type)[Factory] ETEAD1DU

[Field] ETEAD1DU-L- Rack mount type (2U)- Enclosure [IOM (SAS 1port) x1, PSU x2] x1- Up to 12 disk drives can be installed in one drive enclosure.

- Attachment list

Qty

Rackmount kit 1 set

AC200V power cable 2 4m (NEMA L6-15P)SAS cable 2 75cm: Bace unit Drive enclosure connection

Additional IOM for DX80 S2/DX90 S2[Field] ETEAMA-L

- Attachment list

Qty

Rackmount kit 1 set



- Extension cable

- The Extension cable (3m) kit option can be ordered if the SAS cables (75cm)supplied with the drive enclosures are too short to connect.

Extension cable between enclosures for DX80 S2/DX90 S2 (3m)[Field] ETEC1Q3-L- QSFP cable (3m) x1

Extension cable between enclosures for DX80 S2/DX90 S2 (6m)[Field] ETEC1Q6-L

- QSFP cable (6m) x1

Notes

Attachment

Attachment

Notes

Attachment Notes



34


36/42


- Thin Provisioni ng Feature

Single controller model does not support Thin Provisioning Feature.

Thin Provisioning Feature License for DX80 S2[Factory] ETEL8T[Field] ETEL8T-L

- License label x1- To use Thin provisioning Feature, one license is required per one unit.

Thin Provisioning Feature License for DX90 S2[Factory] ETEL9T

[Field] ETEL9T-L- License label x1- To use Thin provisioning Feature, one license is required per one unit.

[Factory]: Factory mount option[Field]: Field upgrade option

(7) Options

ETERNUS DX80 S2

ETERNUS DX90 S2

35


37/42


- Outlet box

- Power distribution unit

Power distribution unit for DX60 S2/DX80 S2/DX90 S2(AC200-240V, 1U Max 2 enclosures connection)ETEP4BU-LRack mount type (1U), AC200VThere are up to two options for connecting a base unit anddrive enclosure.

(PDU for Base unit x2 or PDU for Drive enclosure x2 orPDU for Base unit x1 + PDU for Drive enclosure x1)

- Power distribution unit (AC200V)1- Input AC cable (NEMA L6-15P, 3m) x2

- Output AC cable (3m) x4, Rack mount kit x1

NEMA L6-15 outlet

Power distribution unit for DX60 S2/DX80 S2/DX90 S2(AC200-240V, 2U, Max 6 enclosures connection)

ETEP12U-LRack mount type (1U), AC200VUp to six base units or drive enclosures can be connected.

(Base unit x6,Base unit x2 + Drive enclosure x4Base unit x1 + Drive enclosure x5, etc.)

- Power distribution unit (AC200V)1

- Input AC cable (NEMA L6-20P, 4m) x2

- Output AC cable (3m) x12, Rackmount kit x1

NEMA L6-20 outlet

Power distribution unit for DX60 S2/DX80 S2/DX90 S2(AC200-240V, 2U, Max 8 enclosures connection)

ETEP16U-LRack mount type (1U), AC200VUp to eight base units or drive enclosures can be connected.

(Base unit x8,

Base unit x2 + Drive enclosure x6Base unit x1 + Drive enclosure x7, etc.)- Power distribution unit (AC200V)1- Input AC cable (NEMA L6-30P, 4m) x2- Output AC cable (3m) x16, Rackmount kit x1

NEMA L6-30 outlet

(7) Options

ETERNUS DX60 S2, DX80 S2, DX90

36


38/42


- IEC Power cableAC cable (IEC60320 C13 - IEC60320 C14)

ST-PWG13- To connect IEC 320-C14 components,

one option is required per one base unit or drive enclosure.- AC200V cable (IEC320 C14, 3m) x2

200V (Standard) IEC320

NEMA L6-15 outlet IEC320 outlet


37


39/42


Power Synchronized UnitST-PSM20U

- Power Synchronized Unit x1- RS232C cable x2- Parts kit for 19-inch rack

AC Sensor Unit (AC200V)ST-PSL20SU- AC Sensor Unit x1- RCI cable (4m) x1

- RCI brunch connector x1- Parts kit for 19-inch rack

Note that power cords (for AC power input) for power synchronized units and power cords (for AC sensor) to connect

server UPS units to power synchronized units or AC sensor units are not supplied with power synchronized units.

The IEC 60320-C14 port type is used for the AC IN ports and the SENSOR ports of the power synchronized units.

This port type is also used for the AC IN ports of the AC sensor units.Check the specifications of the power sockets and server UPS unit outlets that are to be used for the powersynchronized units and AC sensor units. Prepare the required number of appropriate power cords.

Power cord (for AC power input)- Each Power Synchronized Unit requires one Power cord.- The voltage for the AC IN port is 10A 250V or less.

Power cord (for AC sensor)

- Each server UPS Unit that is to be connected to The Power Synchronized Unit requires one Power cord.- Each AC sensor Unit requires one Power cord.

Be sure that the power cords have the approval of the appropriate safety agencies of the country where the equipmentwill be used.

(7) Options


38


40/42


- Fibre channel cable (Fibre channel, 10Gbits/s iSCSI, FCoE connection)

Fibre channel cableLength

CBL-MLLC05 5m LC-LC

CBL-MLLC10 10mCBL-MLLC20 20mCBL-MLLC30 30mCBL-MLLC40 40mCBL-MLLC50 50mCBL-MLLD1A 100mCBL-MLLB02 * 2mCBL-MLLB05 * 5m

- m

* For connection between same rack.Fibre channel card, Fibre channel switch

- SAS cable (SAS connection)

SAS cable

LengthCBL-SASB1U 1.5m - SAS connectionCBL-SASB3U 3m

CBL-SASB6U 6m

SAS card

- Twinax Cable (10 Gbit/s iSCSI withtout SFP+, FCoE without SFP+ connection)

Twinax cable

TypeEBRTWX11 1m Brocade/10G-SFPP-TWX-0101EBRTWX31 3m Brocade/10G-SFPP-TWX-0301EBRTWX51 5m Brocade/10G-SFPP-TWX-0501S26361-F4571-L10 7m Cisco/SFP-H10GB-ACU7M

S26361-F4571-L11 10m Cisco/SFP-H10GB-ACU10M

S26361-F3989-L10 5m Fujitsu/T26139-Y4006-M5

FCoE, iSCSI card

Product ID Notes

Notes

(8) Cables

Product ID

Product ID Notes

With cover

Without cover

ETERNUS DX60 S2ETERNUS DX80 S2ETERNUS DX90 S2

ETERNUS DX60 S2ETERNUS DX80 S2ETERNUS DX90 S2

ETERNUS DX80 S2

ETERNUS DX90 S2

39


41/42


- Rack for ETERNUS DX60 S2, DX80 S2, DX90 S2

ETERNUS DX80 S2, DX90 S2 can be installed in the following racks.

Base Rack Expansion Rack19-inch Rack Model 2742 Standard 42U 19R-274A2 19R-274B219-inch Rack Model 2737 Standard 37U 19R-273A2 19R-273B2

19-inch Rack Model 2724 Standard 24U 19R-272A2 -19-inch Rack Model 2642 Slim 42U 19R-264A2 19R-264B219-inch Rack Model 2624 Slim 24U 19R-262A2 -19-inch Rack Model 2616 Slim 16U 19R-261A2 -19-inch rack without stabilizers 40U ETNRKC2U ETNRKD2U19-inch rack with stabilizers 40U ETNRKC1U ETNRKD1U

- Notes

- Height and rack installation order are as follows.

ETEAD2CU, ETEAD2CU-LETEAD2DU, ETEAD2DU-L

ETERNUS DX80 S2 base unit ET082DCU, ET082DDUETERNUS DX90 S2 base unit ET092DCU, ET092DDU

ETEP4BU-L 1UETEP12U-L

ETEP16U-L

2

HeightProduct name Install order for the

rack

1

Drive enclosure 3

Power distribution unit (AC200V)2U

2U

(9) Rack

Product ID

Product name Height Product ID

40


42/42


B025C1020H

B025C1120H

B025C1220H

B011103H0H

B0214G2H0HB013162H0HAIX

ETERNUS Multipath Driver V2 (Linux 32bit/64bit)

AIX ETERNUS Multipath Driver 2

Product ID Product name

Windows ETERNUS Multipath Driver for Entry Model V2.x

Windows ETERNUS Multipath Driver for Standard Model V2.x

Windows ETERNUS Multipath Driver for Enterprise Model V2.x

Solaris ETERNUS Multipath Driver 3.x

(10) ETERNUS Multipath Driver

OS

Windows

Solaris

Linux

eternus configuration guide

Documents