etas rtpc v6.5.1 - hardware compatibility list

ETAS RTPC V6.5.1

Hardware Compatibility List

Copyright

The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation to this document. The software described in it can only be used if the customer is in possession of a general license agreement or single license. Using and copying is only allowed in concurrence with the specifications stipulated in the contract.

Under no circumstances may any part of this document be copied, reproduced, transmitted, stored in a retrieval system or translated into another language without the express written permission of ETAS GmbH.

© Copyright 2021 ETAS GmbH, Stuttgart

The names and designations used in this document are trademarks or brands belonging to the respective owners.

ETAS RTPC V6.5.1 – Hardware Compatibility List R01 EN – 05.2021

ETAS Contents

ETAS RTPC V6.5.1 - Hardware Compatibility List 3

Contents 1 About this Document ........................................................................................... 4

1.1 Classification of Safety Messages ............................................................................ 4

1.2 Presentation of Instructions ..................................................................................... 4

1.3 Typographical Conventions ..................................................................................... 5

1.4 Presentation of Supporting Information .................................................................... 5

2 Introduction .......................................................................................................... 6

3 Released PCs for ETAS RTPC ........................................................................... 7

4 PCs with Known ETAS RTPC Installations (Previous and Current Versions) ..... 9

5 Hardware Requirements of ETAS RTPC .......................................................... 12

6 Contact Information ........................................................................................... 14

ETAS About this Document


1 About this Document

1.1 Classification of Safety Messages The safety messages used here warn of dangers that can lead to personal injury or damage to property:

DANGER

indicates a hazardous situation with a high risk of death or serious injury if not avoided.

WARNING

indicates a hazardous situation of medium risk, which could result in death or serious injury if not avoided.

CAUTION

indicates a hazardous situation of low risk, which may result in minor or moderate injury if not avoided.

NOTICE

indicates a situation, which may result in damage to property if not avoided.

1.2 Presentation of Instructions The target to be achieved is defined in the heading. The necessary steps for his are listed in a step-by-step guide: Target definition

1. Step 1 2. Step 2 3. Step 3 Result

ETAS About this Document


1.3 Typographical Conventions

Software OCI_CANTxMessage msg0 = Code snippets are presented in the Courier font.

Meaning and usage of each command are explained by means of comments. The comments are enclosed by the usual syntax for comments.

Choose File > Open. Menu commands are shown in boldface. Click OK. Buttons are shown in boldface. Press <ENTER>. Keyboard commands are shown in angled

brackets in small caps. The "Open File" dialog box is displayed.

Names of program windows, dialog boxes, fields, etc. are shown in quotation marks.

Select the file setup.exe Text in drop-down lists on the screen, program code, as well as path- and file names are shown in the Courier font.

A distribution is always a one-dimensional table of sample points.

General emphasis and new terms are set in italics.

1.4 Presentation of Supporting Information

NOTE

Contains additional supporting information.

i

ETAS Introduction


2 Introduction The purpose of this document is to guide you in the selection of a suitable PC for the installation of ETAS RTPC V6.5.1. For finding suitable PCs for older versions of ETAS RTPC, please contact the ETAS support.

The Hardware Compatibility List differentiates between released PCs, on which ETAS RTPC V6.5.1 has been deeply tested, and known-installation PCs, on which ETAS RTPC V6.5.1 is known to run but no deep testing has been performed.

If none of the PCs in both categories is available in your region, some general requirements and hints for selecting other PCs are given.

While ETAS RTPC V6.5.1 runs on most PCs with Intel processor, ETAS strongly recommends using the released PCs. Only for these PCs, ETAS can warrant high-quality support.

NOTE

Any RTPC hardware, which was initially delivered with less than 4GB, has to be up graded to at least 4 GB if possible before using the current RTPC version. Otherwise, the use of the current RTPC version is neither recommended nor supported.

i

ETAS Released PCs for ETAS RTPC


3 Released PCs for ETAS RTPC The following list contains the released PCs for ETAS RTPC.

• ETAS TP_RTPC_3U: FME IR-8313-M, 19” 3HE, Core2Duo 2,67GHz/1GB RAM − Details:

19”rack PC 3HE, Core2Duo E6700 2,67GHz, 4MB Level2 Cache, 1 GB DDR2-SDRAM, Supermicro PDSMA+ mainboard, 5 PCI slots, 1 PCI-X, 1 PCI-E (x8), 2 Intel Gigabit Ethernet adapters integrated

− Form factor: 19” rack − Principle diagram:

• ETAS TP_RTPC_3U.2: FME IR-8313-M, 19” 3HE, Core2Quad Q6700 2,67GHz/ 2GB RAM − Details:

19”rack PC 3HE, Core2Quad Q6700 2,67GHz, 2x4MB Level2 Cache, 2 GB DDR2-SDRAM, Supermicro PDSMA+ mainboard, 5 PCI slots, 1 PCI-X, 1 PCI-E (x8), 2 Intel Gigabit Ethernet adapters integrated


• ETAS TP_RTPC_3U.3: FME IR-8236-5M, 19” 3HE, Core2Quad Q9400 2,67GHz/ 2GB RAM − Details:

19”rack PC 3HE, Core2Quad Q9400 2,67GHz, 2x3MB Level2 Cache, 2 GB DDR2-SDRAM, Supermicro C2SBC-Q mainboard, 5 PCI slots, 1 PCI-E (x16), 1 PCI-E (x4), 2 Intel Gigabit Ethernet adapters integrated


• ETAS TP_RTPC_3U.4: FME IR-8236, 19” 3HE, Core i7 3770 4*3,4 GHz/ 8GB RAM − Details:

19”rack PC 3HE, Core i7 3770 3,4GHz, 8MB Level2 Cache, 2x4GB DDR2-SDRAM, Supermicro X9SAE-V mainboard, 2 x8 PCIe, 2 x4 PCIe, 2 x1 PCIe 1 PCI slot, 2 Intel Gigabit Ethernet adapters integrated


ETAS Released PCs for ETAS RTPC


• ETAS ES5100.1: Desktop Housing with integrated Breakout Box − Dimension:

(HxWxD) 165 x 396 x 332 mm / 6.5 x 15.6 x 13.1 in (without feet, cables and short cut connectors) Breakout Box: 2 x 60 plugs (ø2mm), free configurable

− Details: PC: Supermicro X10SQL µATX mainboard, 1 x PCIe 3.0 x16, 1 x PCIe V2.0 x4, 1 PCIe V2.0x1, 2 Intel Gigabit Ethernet adapters integrated; Intel Core [email protected] , 4 x 256kB L2-Cache, 8MB shared L3-Cache, 2 x 4 GB DDR3-SDRAM, 500 GB SATA HD

• HP XW4600 Workstation − Details:

HP XW4600 Workstation, Intel Core2Duo E6850 2x3,0 GHz, 4MB Level2 Cache, Intel X38 Express North Bridge / ICH9R South Bridge, 3 PCI slots, 1 PCIex16, 1 PCIex8, 1 PCIex1, Broadcom BCM5755 NetXtreme Gigabit Ethernet Network Controller, NVIDIA Quadro FX 1700 PCIe

− Form factor: Convertible Minitower

ETAS PCs with Known ETAS RTPC Installations (Previous and Current Versions)


4 PCs with Known ETAS RTPC Installations (Previous and Current Versions) These PCs are known (at least one standard installation) to run with the ETAS RTPC software. Nevertheless, we did not perform extensible tests with these PCs and therefore we cannot guarantee the operation with any hardware configuration.

• Lenovo ThinkStation S20 − Details:

Lenovo ThinkStation S20, Intel® XEON W3565, 8MB L2 cache, Intel® X58 Express Chipset, 1 PCI slot, 1 PCIe x 4 slot, 2 PCIe x16 slot, Integrated Broadcom Gigabit Ethernet

− Form factor: Minitower − The ThinkStation S20 has not been tested with ES5340.2-M board.

• HP XW4400 Workstation − Details:

HP XW4400 Workstation, Intel Core2Duo E6600 2,4 GHz, 4MB Level2 Cache, i975x North bridge/ IHC7R South bridge chipset, 3 PCI slots, Integrated Broadcom NetXtreme Gigabit Ethernet

− Form factor: Minitower

• HP Z400 Workstation − Details:

HP Z400 Workstation, Intel XEON W3520 Quad Core 2,66 GHz, 8MB Level2 Cache, Intel® X58 Express chipset, 2 PCIe Gen2 x16, 1 PCIe Gen2 (x8 mechanical, x4 electrical), 1 PCIe Gen1 (x8 mech., x4 el.), 2 PCI, Integrated Broadcom 5764 10/100/1000 PCIe LAN board

− Form factor: convertible mini tower − Known issue regarding backward compatibility: On

board LAN is not detected by RTPC V4.0.2

• HP Z420 Workstation − Details:

HP Z420 Workstation H4L21EP, Intel XEON E5-1650 Quad Core 3,2 GHz, 12MB Level2 Cache, Intel® chipset C602, 32GB RAM (8x4GB) DDR3-1600 ECC unbuffered, 2 PCIe Gen3 x16, 1 PCIe Gen3 x8, 1PCIe Gen2 (x8 mechanical, x4 electrical), 1 PCIe Gen2 (x4 mech., x1 el.) (The PCIe x8 connectors are open ended, allowing a PCIe x16 card to be seated in the slot. ), 1 PCI, Integrated Intel 82579LM PCIe Gigabit Controller

− Form factor: convertible mini tower − Known issue regarding backward compatibility: On board hard disc

not detected by RTPC <V6.0.0



• HP Z800 Workstation KK643EA − Details:

HP Z800 Workstation, Intel Xeon X5620 2,4 GHz, 2MB Level2 cache, chipset Intel® 5520, slots: 2 PCIe x16, 2 PCIe x8, 2 PCIe x4, 1 PCI, Dual integrated Broadcom 5764 Gigabit LAN

− Form factor: Rackable Minitower

• FME 19’’3U, Core i7-920 2,66GHz/2GB RAM − Details:

19”rack PC 3 HE, Core i7-920 4x2,66GHz, 8MB Intel Smart Cache, Supermicro X8STE mainboard, 2 x 32 bit PCI slots, 3x8 PCI-e 2.0 (1 using x16 slot), 1 (x4) PCI-e slot (using x8 slot), 2 Intel Gigabit Ethernet adapters integrated

− Form factor: 19” rack

• CPD 19’’4U, Xeon 3070 2,67GHz/1GB RAM − Details:

19”rack PC 4 HE, Xeon 3070 2,67GHz, 4MB Level2 Cache, Supermicro PDSMA+ mainboard, 5 PCI slots, 1 PCI-X, 1 PCI-E (x8), 2 Intel Gigabit Ethernet adapters integrated


• IPC 19” 3U/Core2Duo 2,67GHz LGA775/512 MB RAM − Details:

19”rack PC 3HE, Core2Duo E6700 2.67GHz, 4MB Level2 Cache, Supermicro PDSBA mainboard, Ethernet adapters integrated, 4 PCI slots, 1x PCI-E (x16), 1x PCI-E (x4), 1x PCI-E (x1)


FME IR-8223-M, 19” 2HE, Core2Duo 2,67GHz/1GB RAM − Details:

19”rack PC 2HE, Core2Duo E6700 2,67GHz, 4MB Level2 Cache, 1 GB DDR2-SDRAM, Supermicro PDSMU mainboard, 3 PCI slots, 2 Intel Gigabit Ethernet adapters integrated, additional slot for 4-Ethernet adapter card

− Form factor: 19” rack − The 2U system does not support the new ES53xx PCIe boards.

• FME IR-8223-M, 19” 2HE, Core2Quad Q6700 2,67GHz/ 2GB RAM

− Details: 19”rack PC 2HE, Core2Quad Q6700 2,67GHz, 2x4MB Level2 Cache, 2 GB DDR2-SDRAM, Supermicro PDSMU

Principle diagram

Principle diagram

Principle diagram

Principle diagram

Principle diagram



mainboard, 3 PCI slots, 2 Intel Gigabit Ethernet adapters integrated, additional slot for 4-Ethernet adapter card

− Form factor: 19” rack − The 2U system does not support the new ES53xx PCIe boards.

• FME ‘FME EPB – PCE - 3U’ − Details:

19”rack 3U PCI express expansion box, PCIe x8 Host adapter, slots 4 PCIe x8 slots, 3 PCIe x4


Principle diagram

ETAS Hardware Requirements of ETAS RTPC


5 Hardware Requirements of ETAS RTPC ETAS RTPC runs on most Intel compatible PCs. If none of the released PCs is available in your region, please do one of the following:

Call ETAS support for the latest update of this document.

Or

Select a PC that has the same set of CPU, main board and memory as one of the released PCs. These components and their compatibility determine whether a PC is suitable for ETAS RTPC.

If you nevertheless want to select your own hardware, obey the following steps. However, please keep in mind that ETAS cannot guarantee that upcoming versions of ETAS RTPC will also support your PC.

To check general hardware requirements

1. Check if your hardware fulfills the following requirements:

With the features “support from off-the-shelf serial I/O PCI cards” and “massive I/O for up to 8 housings”, you should only use PCs with minimal 3 slots PCI or PCIe.

2. Check if at least one PCI slot has an exclusive IRQ (interrupt is not shared between two or more devices).

CPU Intel Core i7 Intel Core2Quad Intel Core2Duo Intel Xeon

Onboard Ethernet Adapter All types supported by Linux kernel version 3.2.x (e.g. Realtek 8139, SiS900, Intel 8255x, Intel 82573x, Intel Gigabit Network Connection 82574L, 82583V, 82567V-3, 82567LM-4, 82567LM-3, 82567LF-3, 82567V-4, 82577LM, 82577LC, 82578DM, 82578DC)

RAM 4 GB mandatory 8 GB recommended

South bridge chip ICH 2,4,5,6,7,8, 9 for example the Intel chipsets 915, 925, 945, 955, 965, 975, E7230 and X38, X48 and X58

Hard Disk IDE or SATA / 250 GB or more Keyboard PS/2 or USB,

for installation only Graphic Adapter VGA compatible adapter

(text mode only) Removable Media Drive Bootable / IDE, SATA or USB DVD PCI/PCIe Ethernet Adapter Intel PRO/100 card S, revision 12 (0C) or later

Intel PRO/1000 family Intel PRO/1000 PT Quad Server Adapter PCIe x4

connector Intel Gigabit CT Desktop adapter Supermicro AOC-UG-i4 for FME IR-8223-M PCIe

x8 UIO connector

ETAS Hardware Requirements of ETAS RTPC


3. Disable unused peripheral devices in the BIOS setup (e.g. USB, audio, FireWire).

To check IRQ 1. Install ETAS RTPC V6.5.1. 2. Reboot system. 3. Check console output.

ETAS RTPC shall output Checking IRQ assignments of Ethernet adapters: OK.

ETAS Contact Information


6 Contact Information

ETAS Headquarters ETAS GmbH Borsigstraße 24 Phone: +49 711 3423-0 70469 Stuttgart Fax: +49 711 3423-2106 Germany Internet: www.etas.com

ETAS Subsidiaries and Technical Support For details of your local sales office as well as your local technical support team and product hotlines, take a look at the ETAS website: ETAS subsidiaries Internet: www.etas.com/en/contact.php ETAS technical support Internet: www.etas.com/en/hotlines.php

https://www.etas.com/

https://www.etas.com/en/contact.php

https://www.etas.com/en/hotlines.php

etas rtpc v6.5.1 - hardware compatibility list

Documents