Eslam Mohamed Mustafa

1,Ahmed lakooz St. , zagazig , Elsharkia ,Egypt.

EGYPT Cell1: +201222478080 Cell2: +201016867079

IRAQ CELL3: +9647830101640

Eslam.mostafa.1982@gmail.com

Mechanical Power Engineer Highly analytical, Performance-driven engineering professional with 6+ years' experience, Cost-efficient designs. Expertise in applied research, new concept development, Simulation, and validation. Superior problem-solving and time-management abilities. Team spirited with effective communication and presentation skills. Proficient with AutoCAD, solid works , Microsoft project, MS Office (ICDL), Primavera.

Research& design strengths

• Design, analysis, and validation • Project\qualification planning • Manufacturing requirement \ specification • Safety compliance • Process analysis

PROFESSIONAL EXPERIENCE

THE ARAB CONTRACTORS (OSMAN AHMED OSMAN &CO.)

Ω Basrah Water Supply Improvement Project (BWSIP-package 3 &4)

From 1ST JAN 2016 until now with capacity 200000 Meter cube per day with UF-RO system worked as a mechanical engineer for all process buildings .

THE ARAB CONTRACTORS (OSMAN AHMED OSMAN &CO.)

FROM 1 ST OF JULY 2014 SINCE 1st JAN Ω Al- DIWANYA POWER PLANT (4*125)MW IN IRAQ 2016

ʘ INSTALL WATER TREATMENT PLANT (UF – RO) SYSTEM PRODUCE 100 M³/H DEMIN WATER FOR COOLING TURBINES AND POTABLE WATER FOR DRINKING AND TREATMENT SYSTEM SUPPLYING By GE (GENERA L ELECTRIC WATER COMPANY ).

ʘ WASTE AND SAINNATRY WATER TREATMENT PLANT BY GE

ʘ STEEL STRUCTURE BUILDINGS

ʘ INSTALL FIRE FIGHTING SYSTEM INCLUDING ELECTRICAL AND JOKI and diesel PUMPS supplied by Patterson company AND THE SYSTEM IN ALL BUILDING AND TRANSFORMERS.

THE ARAB CONTRACTORS (OSMAN AHMED OSMAN &CO.)

Mechanical&Electrical Project Division. 2013 – since 30 JUNE 2014

Director of Electromechanical works in WTP ABOTESHT Plant 1200 l/s – DAR EL SALAM Plant 1400 l/s

THE ARAB CONTRACTORS (OSMAN AHMED OSMAN &CO.)

Mechanical&Electrical Project Division. 2010 – 2013

Mechanical site engineer (Bellies water treatment station 2400 l/s)

Studying the Site correctly, review the units drawings, then studying the Technical Specification and Bill of quantities, comparing it with Design drawing. If there are any divisions I draw as built drawing and install it.

I install water treatment components as:

• Intake building with mechanical screen.

• Raw water pumping station ( 8 centrifugal pumps 660 l/s at 12 m head with suction and delivery pipes and valves and special pieces ).

• Flocculation building (flash mixer – slow mixer –scrappers –pumping systems).

• Filters House Equipment (22 unit filter media with operating desk –control butterfly valves-Complete system Air blowers-pneumatic systems complete with compressor, tanks, other accessories –backwash pumps-control room equipment.

• Underground reservoir building.

• Chlorination building.

• Alum building

• Treated water pumping station

• GENRATOR building

I install this site as electromechanical engineer .I'm experienced in plumbing and network pipes,. I install this site as a turnkey .I did everything in this site with my

good efficient group so ,I have a good experience with water like a fluid .

THE ARAB CONTRACTORS (OSMAN AHMED OSMAN &CO.)

Mechanical&Electrical Project Division. 2009 – 2010

Tanta potable water treatment station 1400 - 2000 l/s

Mechanical site engineer

I install this site as electromechanical engineer .I'm experienced in plumbing and network pipes,. I install this site as a turnkey .I did everything in this site with my good efficient group.

2009-2008 Environmental civil engineering consulting center (ENVIRO CIVEC)

DESIGN AND SUPERVISOR ENGINEER

• New Cairo waste water pumping stations

• Abu Rawash waste water treatment planet

• El Tal Elkber -Elbakarsha Waste water pumping station

• Samalot potable water treatment planet

• 15 of May potable water pumping station

AL-REHAB CITY _ MADINTY CITY 2007 - 2008

Piping, plumping and HVAC system

Fire fighting systems

EDUCATION \ ASSOCIATION

Bachelor of science in Mechanical Power Engineering (BSMPE), 2006 Zagazig University,Elsharkya , Egypt.

Cumulative grade: Pass

Professional Development:

~ Advanced Design in Fluid Mechanics

~ Heat Transfer and Thermodynamics Simulation

Courses & Training :

• Take OSHA safety course ( March - 2011 ) • ICDL Certification (November - 2008) • TOEFL Certification test (April – 2010 ) • (Institute for Construction Engineering and

Management) :

• Preparation and Rehabilitation of a Modern Mechanics and Electricity Engineer

• (1st stage 2/5/2011 – 12/5/2011 ) (2nd stage 2/10/2011-13/10/2011) (3rd stage 11/12/2011-22/12/2011)

• Centrifugal Pumps ( 19/10/2011- 20/10/2011) • ALLIMENT OF PUMPS